Skip to contentSkip to conversation

dt-bindings: Clean-up schema indentation formatting

PATCH In review Rob Herring 12 participants 24 messages Apr 16, 2020 – Apr 20, 2020

Subsystems (96)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/2 dt-bindings: Clean-up schema indentation formatting

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

---
 .../devicetree/bindings/arm/altera.yaml       |  6 +-
 .../amlogic/amlogic,meson-gx-ao-secure.yaml   |  2 +-
 .../devicetree/bindings/arm/bitmain.yaml      |  2 +-
 .../devicetree/bindings/arm/nxp/lpc32xx.yaml  |  9 ++-
 .../bindings/arm/socionext/uniphier.yaml      | 26 ++++----
 .../bindings/arm/stm32/st,mlahb.yaml          |  2 +-
 .../bindings/arm/stm32/st,stm32-syscon.yaml   |  6 +-
 .../bindings/ata/faraday,ftide010.yaml        |  4 +-
 .../bindings/bus/allwinner,sun8i-a23-rsb.yaml |  4 +-
 .../clock/allwinner,sun4i-a10-gates-clk.yaml  |  8 +--
 .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++--
 .../devicetree/bindings/clock/qcom,mmcc.yaml  | 16 ++---
 .../bindings/connector/usb-connector.yaml     |  6 +-
 .../crypto/allwinner,sun4i-a10-crypto.yaml    | 14 ++--
 .../bindings/crypto/allwinner,sun8i-ce.yaml   | 16 ++---
 .../bindings/crypto/amlogic,gxl-crypto.yaml   |  2 +-
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 40 ++++++------
 .../display/allwinner,sun4i-a10-tcon.yaml     | 58 ++++++++---------
 .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++----
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +--
 .../bindings/display/bridge/lvds-codec.yaml   | 18 +++---
 .../display/panel/sony,acx424akp.yaml         |  2 +-
 .../display/panel/xinpeng,xpp055c272.yaml     |  4 +-
 .../bindings/display/renesas,cmm.yaml         | 16 ++---
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  8 +--
 .../bindings/gpio/brcm,xgs-iproc-gpio.yaml    |  2 +-
 .../bindings/gpu/arm,mali-midgard.yaml        | 18 +++---
 .../devicetree/bindings/gpu/vivante,gc.yaml   |  2 +-
 .../devicetree/bindings/i2c/i2c-rk3x.yaml     | 10 +--
 .../bindings/iio/adc/adi,ad7124.yaml          |  4 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |  6 +-
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |  4 +-
 .../bindings/input/touchscreen/goodix.yaml    |  2 +-
 .../bindings/interconnect/qcom,msm8916.yaml   |  4 +-
 .../bindings/interconnect/qcom,msm8974.yaml   |  4 +-
 .../bindings/interconnect/qcom,qcs404.yaml    |  4 +-
 .../allwinner,sun7i-a20-sc-nmi.yaml           | 12 ++--
 .../intel,ixp4xx-interrupt.yaml               |  8 +--
 .../interrupt-controller/st,stm32-exti.yaml   | 12 ++--
 .../bindings/iommu/samsung,sysmmu.yaml        | 10 +--
 .../bindings/mailbox/st,stm32-ipcc.yaml       |  2 +-
 .../media/allwinner,sun4i-a10-csi.yaml        | 28 ++++----
 .../bindings/media/amlogic,gx-vdec.yaml       | 14 ++--
 .../bindings/media/renesas,ceu.yaml           | 28 ++++----
 .../bindings/media/renesas,vin.yaml           |  8 +--
 .../devicetree/bindings/media/ti,vpe.yaml     |  2 +-
 .../memory-controllers/fsl/imx8m-ddrc.yaml    |  6 +-
 .../bindings/mfd/st,stm32-lptimer.yaml        |  4 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  4 +-
 .../devicetree/bindings/mfd/syscon.yaml       | 12 ++--
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  2 +-
 .../bindings/mmc/rockchip-dw-mshc.yaml        | 16 ++---
 .../bindings/mmc/socionext,uniphier-sd.yaml   | 14 ++--
 .../devicetree/bindings/mtd/denali,nand.yaml  |  4 +-
 .../net/allwinner,sun8i-a83t-emac.yaml        |  4 +-
 .../bindings/net/can/bosch,m_can.yaml         | 52 +++++++--------
 .../bindings/net/renesas,ether.yaml           |  4 +-
 .../bindings/net/ti,cpsw-switch.yaml          | 12 ++--
 .../bindings/net/ti,davinci-mdio.yaml         | 27 ++++----
 .../bindings/phy/intel,lgm-emmc-phy.yaml      |  2 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  | 16 ++---
 .../bindings/remoteproc/st,stm32-rproc.yaml   |  2 +-
 .../reset/brcm,bcm7216-pcie-sata-rescal.yaml  |  4 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------
 .../bindings/serial/amlogic,meson-uart.yaml   | 16 ++---
 .../devicetree/bindings/serial/rs485.yaml     | 17 ++---
 .../bindings/soc/amlogic/amlogic,canvas.yaml  | 10 +--
 .../bindings/sound/renesas,fsi.yaml           | 16 ++---
 .../bindings/spi/qcom,spi-qcom-qspi.yaml      | 10 +--
 .../devicetree/bindings/spi/renesas,hspi.yaml |  4 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  2 +-
 .../bindings/spi/st,stm32-qspi.yaml           |  4 +-
 .../allwinner,sun4i-a10-system-control.yaml   | 64 +++++++++----------
 .../bindings/thermal/amlogic,thermal.yaml     | 10 +--
 .../bindings/timer/arm,arch_timer.yaml        |  4 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |  4 +-
 .../devicetree/bindings/usb/dwc2.yaml         |  8 +--
 77 files changed, 450 insertions(+), 450 deletions(-)
Documentation/devicetree/bindings/arm/altera.yaml +3 -3
index 49e0362ddc11..b388c5aa7984 100644
@@ -13,8 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
-        - altr,socfpga-arria10
+          - altr,socfpga-cyclone5
+          - altr,socfpga-arria5
+          - altr,socfpga-arria10
       - const: altr,socfpga
 ...
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1 -1
index 66213bd95e6e..6cc74523ebfd 100644
@@ -25,7 +25,7 @@ select:
 
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon
 
Documentation/devicetree/bindings/arm/bitmain.yaml +1 -1
index 0efdb4ac028e..5cd5b36cff2d 100644
@@ -13,6 +13,6 @@ properties:
   compatible:
     items:
       - enum:
-        - bitmain,sophon-edge
+          - bitmain,sophon-edge
       - const: bitmain,bm1880
 ...
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4 -5
index 07f39d3eee7e..f7f024910e71 100644
@@ -17,9 +17,8 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
-
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
 ...
Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +13 -13
index 65ad6d8a3c99..113f93b9ae55 100644
@@ -17,45 +17,45 @@ properties:
       - description: LD4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld4-ref
+              - socionext,uniphier-ld4-ref
           - const: socionext,uniphier-ld4
       - description: Pro4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pro4-ace
-            - socionext,uniphier-pro4-ref
-            - socionext,uniphier-pro4-sanji
+              - socionext,uniphier-pro4-ace
+              - socionext,uniphier-pro4-ref
+              - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
       - description: sLD8 SoC boards
         items:
           - enum:
-            - socionext,uniphier-sld8-ref
+              - socionext,uniphier-sld8-ref
           - const: socionext,uniphier-sld8
       - description: PXs2 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs2-gentil
-            - socionext,uniphier-pxs2-vodka
+              - socionext,uniphier-pxs2-gentil
+              - socionext,uniphier-pxs2-vodka
           - const: socionext,uniphier-pxs2
       - description: LD6b SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld6b-ref
+              - socionext,uniphier-ld6b-ref
           - const: socionext,uniphier-ld6b
       - description: LD11 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld11-global
-            - socionext,uniphier-ld11-ref
+              - socionext,uniphier-ld11-global
+              - socionext,uniphier-ld11-ref
           - const: socionext,uniphier-ld11
       - description: LD20 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld20-global
-            - socionext,uniphier-ld20-ref
+              - socionext,uniphier-ld20-global
+              - socionext,uniphier-ld20-ref
           - const: socionext,uniphier-ld20
       - description: PXs3 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs3-ref
+              - socionext,uniphier-pxs3-ref
           - const: socionext,uniphier-pxs3
Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +1 -1
index 55f7938c4826..9f276bc9efa0 100644
@@ -20,7 +20,7 @@ description: |
   [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +3 -3
index baff80197d5a..cf5db5e273f3 100644
@@ -14,9 +14,9 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32mp157-syscfg
-        - const: syscon
+          - enum:
+              - st,stm32mp157-syscfg
+          - const: syscon
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +2 -2
index bfc6357476fd..6451928dd2ce 100644
@@ -26,8 +26,8 @@ properties:
     oneOf:
       - const: faraday,ftide010
       - items:
-        - const: cortina,gemini-pata
-        - const: faraday,ftide010
+          - const: cortina,gemini-pata
+          - const: faraday,ftide010
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +2 -2
index 80973619342d..32d33b983d66 100644
@@ -21,8 +21,8 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a23-rsb
       - items:
-        - const: allwinner,sun8i-a83t-rsb
-        - const: allwinner,sun8i-a23-rsb
+          - const: allwinner,sun8i-a83t-rsb
+          - const: allwinner,sun8i-a23-rsb
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +4 -4
index ed1b2126a81b..9a37a357cb4e 100644
@@ -52,12 +52,12 @@ properties:
       - const: allwinner,sun4i-a10-dram-gates-clk
 
       - items:
-        - const: allwinner,sun5i-a13-dram-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
       - items:
-        - const: allwinner,sun8i-h3-apb0-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/clock/fsl,plldig.yaml +8 -9
index a203d5d498db..8141f22410dd 100644
@@ -28,15 +28,14 @@ properties:
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
-     minimum: 650000000
-     maximum: 1300000000
-     default: 1188000000
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
 
 required:
   - compatible
Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +8 -8
index f684fe67db84..acc31b3991bd 100644
@@ -15,15 +15,15 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,mmcc-apq8064
-       - qcom,mmcc-apq8084
-       - qcom,mmcc-msm8660
-       - qcom,mmcc-msm8960
-       - qcom,mmcc-msm8974
-       - qcom,mmcc-msm8996
-       - qcom,mmcc-msm8998
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
 
   clocks:
     items:
Documentation/devicetree/bindings/connector/usb-connector.yaml +3 -3
index 4638d7adb806..369c58e22a06 100644
@@ -144,7 +144,7 @@ required:
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
-  - |+
+  - |
     muic-max77843 {
       usb_con1: connector {
         compatible = "usb-b-connector";
@@ -156,7 +156,7 @@ examples:
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
   # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-  - |+
+  - |
     ccic: s2mm005 {
       usb_con2: connector {
         compatible = "usb-c-connector";
@@ -190,7 +190,7 @@ examples:
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
   # power delivery support and enables drp.
-  - |+
+  - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
       usb_con3: connector {
Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +7 -7
index 8b9a8f337f16..fc823572bcff 100644
@@ -15,16 +15,16 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun5i-a13-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun5i-a13-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun6i-a31-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun6i-a31-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun7i-a20-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun7i-a20-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun8i-a33-crypto
+          - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +8 -8
index 2c459b8c76ff..7a60d84289cc 100644
@@ -50,16 +50,16 @@ if:
         const: allwinner,sun50i-h6-crypto
 then:
   properties:
-      clocks:
-        minItems: 3
-      clock-names:
-        minItems: 3
+    clocks:
+      minItems: 3
+    clock-names:
+      minItems: 3
 else:
   properties:
-      clocks:
-        maxItems: 2
-      clock-names:
-        maxItems: 2
+    clocks:
+      maxItems: 2
+    clock-names:
+      maxItems: 2
 
 required:
   - compatible
Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +1 -1
index 5becc60a0e28..385b23d255c3 100644
@@ -12,7 +12,7 @@ maintainers:
 properties:
   compatible:
     items:
-    - const: amlogic,gxl-crypto
+      - const: amlogic,gxl-crypto
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +20 -20
index 5d4915aed1e2..75e6479397a5 100644
@@ -21,8 +21,8 @@ properties:
       - const: allwinner,sun5i-a10s-hdmi
       - const: allwinner,sun6i-a31-hdmi
       - items:
-        - const: allwinner,sun7i-a20-hdmi
-        - const: allwinner,sun5i-a10s-hdmi
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
 
   reg:
     maxItems: 1
@@ -33,32 +33,32 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
 
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The HDMI DDC clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
 
   clock-names:
     oneOf:
       - items:
-        - const: ahb
-        - const: mod
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
 
       - items:
-        - const: ahb
-        - const: mod
-        - const: ddc
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
 
   resets:
     maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +29 -29

92 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +14 -14
index 9e90c2b00960..eed05b26cdf3 100644
@@ -76,28 +76,28 @@ required:
 allOf:
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun6i-a31-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 2
+      properties:
+        clocks:
+          minItems: 2
 
-        required:
-          - clock-names
+      required:
+        - clock-names
 
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun50i-a64-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun50i-a64-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 1
+      properties:
+        clocks:
+          minItems: 1
 
 additionalProperties: false
 
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +5 -5
index 4d6795690ac3..fa4769a0b26e 100644
@@ -29,11 +29,11 @@ properties:
       - const: allwinner,sun50i-h6-dw-hdmi
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-dw-hdmi
-          - allwinner,sun8i-r40-dw-hdmi
-          - allwinner,sun50i-a64-dw-hdmi
-        - const: allwinner,sun8i-a83t-dw-hdmi
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +9 -9
index 8f373029f5d2..e737951f5873 100644
@@ -32,17 +32,17 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
-          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
-          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
-        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
-        - enum:
-          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
-        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+          - enum:
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
-        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
     type: object
Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +1 -1
index 185dcc8fd1f9..78d060097052 100644
@@ -18,7 +18,7 @@ properties:
   reg: true
   reset-gpios: true
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   enforce-video-mode: true
 
 required:
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +2 -2
index d9fdb58e06b4..891de2256d22 100644
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
Documentation/devicetree/bindings/display/renesas,cmm.yaml +8 -8
index a57037b9e9ba..005406c89507 100644
@@ -21,15 +21,15 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - renesas,r8a7795-cmm
-          - renesas,r8a7796-cmm
-          - renesas,r8a77965-cmm
-          - renesas,r8a77990-cmm
-          - renesas,r8a77995-cmm
-        - const: renesas,rcar-gen3-cmm
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
       - items:
-        - const: renesas,rcar-gen2-cmm
+          - const: renesas,rcar-gen2-cmm
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +4 -4
index 39ea05e6e5ff..85056982a242 100644
@@ -69,10 +69,10 @@ properties:
     maxItems: 3
 
   reg-names:
-   items:
-     - const: gcfg
-     - const: rchanrt
-     - const: tchanrt
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
 
   msi-parent: true
 
Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +1 -1
index 5f1ed20e43ee..4f2cbd8307a7 100644
@@ -27,7 +27,7 @@ properties:
   gpio-controller: true
 
   '#gpio-cells':
-      const: 2
+    const: 2
 
   ngpios:
     minimum: 0
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +9 -9
index 0407e45eb8c4..a7a67e0a42e5 100644
@@ -16,33 +16,33 @@ properties:
     oneOf:
       - items:
           - enum:
-             - samsung,exynos5250-mali
+              - samsung,exynos5250-mali
           - const: arm,mali-t604
       - items:
           - enum:
-             - samsung,exynos5420-mali
+              - samsung,exynos5420-mali
           - const: arm,mali-t628
       - items:
           - enum:
-             - allwinner,sun50i-h6-mali
+              - allwinner,sun50i-h6-mali
           - const: arm,mali-t720
       - items:
           - enum:
-             - amlogic,meson-gxm-mali
-             - realtek,rtd1295-mali
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
           - const: arm,mali-t820
       - items:
           - enum:
-             - arm,juno-mali
+              - arm,juno-mali
           - const: arm,mali-t624
       - items:
           - enum:
-             - rockchip,rk3288-mali
-             - samsung,exynos5433-mali
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
           - const: arm,mali-t760
       - items:
           - enum:
-             - rockchip,rk3399-mali
+              - rockchip,rk3399-mali
           - const: arm,mali-t860
 
           # "arm,mali-t830"
Documentation/devicetree/bindings/gpu/vivante,gc.yaml +1 -1
index 0bc4b38d5cbb..e1ac6ff5a230 100644
@@ -9,7 +9,7 @@ title: Vivante GPU Bindings
 description: Vivante GPU core devices
 
 maintainers:
-  -  Lucas Stach <[email protected]>
+  - Lucas Stach <[email protected]>
 
 properties:
   compatible:
Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +5 -5
index 61eac76c84c4..790aa7218ee0 100644
@@ -28,14 +28,14 @@ properties:
       - const: rockchip,rk3399-i2c
       - items:
           - enum:
-            - rockchip,rk3036-i2c
-            - rockchip,rk3368-i2c
+              - rockchip,rk3036-i2c
+              - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
           - enum:
-            - rockchip,px30-i2c
-            - rockchip,rk3308-i2c
-            - rockchip,rk3328-i2c
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -2
index f0934b295edc..97087a45ce54 100644
@@ -72,8 +72,8 @@ patternProperties:
           The channel number. It can have up to 8 channels on ad7124-4
           and 16 channels on ad7124-8, numbered from 0 to 15.
         items:
-         minimum: 0
-         maximum: 15
+          minimum: 0
+          maximum: 15
 
       adi,reference-select:
         description: |
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +3 -3
index 118809a03279..97f521d654ea 100644
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology / Analog Devices LTC2496 ADC
 
 maintainers:
- - Lars-Peter Clausen <[email protected]>
- - Michael Hennerich <[email protected]>
- - Stefan Popa <[email protected]>
+  - Lars-Peter Clausen <[email protected]>
+  - Michael Hennerich <[email protected]>
+  - Stefan Popa <[email protected]>
 
 properties:
   compatible:
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -2
index 5b3b71c9c018..512a6af5aa42 100644
@@ -16,8 +16,8 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-        - const: allwinner,sun50i-a64-lradc
-        - const: allwinner,sun8i-a83t-r-lradc
+          - const: allwinner,sun50i-a64-lradc
+          - const: allwinner,sun8i-a83t-r-lradc
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1 -1
index c8ea9434c9cc..e81cfa56f25a 100644
@@ -63,7 +63,7 @@ required:
   - interrupts
 
 examples:
-- |
+  - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +2 -2
index 4107e60cab12..e1009ae4e8f7 100644
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <[email protected]>
 
 description: |
-   The Qualcomm MSM8916 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm MSM8916 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   compatible:
Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +2 -2
index 9af3c6e59cff..8004c4baf397 100644
@@ -10,8 +10,8 @@ maintainers:
   - Brian Masney <[email protected]>
 
 description: |
-   The Qualcomm MSM8974 interconnect providers support setting system
-   bandwidth requirements between various network-on-chip fabrics.
+  The Qualcomm MSM8974 interconnect providers support setting system
+  bandwidth requirements between various network-on-chip fabrics.
 
 properties:
   reg:
Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +2 -2
index 8d65c5f80679..3fbb8785fbc9 100644
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <[email protected]>
 
 description: |
-   The Qualcomm QCS404 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm QCS404 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   reg:
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +6 -6
index cf09055da78b..7cd6b8bacfa0 100644
@@ -27,15 +27,15 @@ properties:
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
       - items:
-        - const: allwinner,sun8i-a83t-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun8i-a83t-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - const: allwinner,sun9i-a80-sc-nmi
       - items:
-        - const: allwinner,sun50i-a64-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-a64-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - items:
-        - const: allwinner,sun50i-h6-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-h6-r-intc
+          - const: allwinner,sun6i-a31-r-intc
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +4 -4
index ccc507f384d2..14dced11877b 100644
@@ -25,10 +25,10 @@ properties:
   compatible:
     items:
       - enum:
-        - intel,ixp42x-interrupt
-        - intel,ixp43x-interrupt
-        - intel,ixp45x-interrupt
-        - intel,ixp46x-interrupt
+          - intel,ixp42x-interrupt
+          - intel,ixp43x-interrupt
+          - intel,ixp45x-interrupt
+          - intel,ixp46x-interrupt
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +6 -6
index 9e5c6608b4e3..2a5b29567926 100644
@@ -14,13 +14,13 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32-exti
-          - st,stm32h7-exti
+          - enum:
+              - st,stm32-exti
+              - st,stm32h7-exti
       - items:
-        - enum:
-          - st,stm32mp1-exti
-        - const: syscon
+          - enum:
+              - st,stm32mp1-exti
+          - const: syscon
 
   "#interrupt-cells":
     const: 2
Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +5 -5
index 0e33cd9e010e..af51b91c893e 100644
@@ -54,13 +54,13 @@ properties:
   clock-names:
     oneOf:
       - items:
-        - const: sysmmu
+          - const: sysmmu
       - items:
-        - const: sysmmu
-        - const: master
+          - const: sysmmu
+          - const: master
       - items:
-        - const: aclk
-        - const: pclk
+          - const: aclk
+          - const: pclk
 
   "#iommu-cells":
     const: 0
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +1 -1
index 5b13d6672996..db851541d619 100644
@@ -24,7 +24,7 @@ properties:
     maxItems: 1
 
   clocks:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
     items:
Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +14 -14
index 8453ee340b9f..09318830db47 100644
@@ -20,11 +20,11 @@ properties:
       - const: allwinner,sun4i-a10-csi1
       - const: allwinner,sun7i-a20-csi0
       - items:
-        - const: allwinner,sun7i-a20-csi1
-        - const: allwinner,sun4i-a10-csi1
+          - const: allwinner,sun7i-a20-csi1
+          - const: allwinner,sun4i-a10-csi1
       - items:
-        - const: allwinner,sun8i-r40-csi0
-        - const: allwinner,sun7i-a20-csi0
+          - const: allwinner,sun8i-r40-csi0
+          - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -35,24 +35,24 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The CSI interface clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI DRAM clock
 
       - items:
-        - description: The CSI interface clock
-        - description: The CSI ISP clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI ISP clock
+          - description: The CSI DRAM clock
 
   clock-names:
     oneOf:
       - items:
-        - const: bus
-        - const: ram
+          - const: bus
+          - const: ram
 
       - items:
-        - const: bus
-        - const: isp
-        - const: ram
+          - const: bus
+          - const: isp
+          - const: ram
 
   resets:
     maxItems: 1
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +7 -7
index 37d77e065491..5a1da4029c37 100644
@@ -29,14 +29,14 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,gxbb-vdec # GXBB (S905)
-          - amlogic,gxl-vdec # GXL (S905X, S905D)
-          - amlogic,gxm-vdec # GXM (S912)
-        - const: amlogic,gx-vdec
+          - enum:
+              - amlogic,gxbb-vdec # GXBB (S905)
+              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxm-vdec # GXM (S912)
+          - const: amlogic,gx-vdec
       - enum:
-        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
-        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+          - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+          - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
 
   interrupts:
     minItems: 2
Documentation/devicetree/bindings/media/renesas,ceu.yaml +14 -14
index fcb5f13704a5..f2393458814e 100644
@@ -32,23 +32,23 @@ properties:
     additionalProperties: false
 
     properties:
-       endpoint:
-         type: object
-         additionalProperties: false
+      endpoint:
+        type: object
+        additionalProperties: false
 
          # Properties described in
          # Documentation/devicetree/bindings/media/video-interfaces.txt
-         properties:
-           remote-endpoint: true
-           hsync-active: true
-           vsync-active: true
-           field-even-active: false
-           bus-width:
-             enum: [8, 16]
-             default: 8
-
-         required:
-           - remote-endpoint
+        properties:
+          remote-endpoint: true
+          hsync-active: true
+          vsync-active: true
+          field-even-active: false
+          bus-width:
+            enum: [8, 16]
+            default: 8
+
+        required:
+          - remote-endpoint
 
     required:
       - endpoint
Documentation/devicetree/bindings/media/renesas,vin.yaml +4 -4
index 1ec947b4781f..ecc09f1124d4 100644
@@ -261,13 +261,13 @@ properties:
 
         anyOf:
           - required:
-            - endpoint@0
+              - endpoint@0
           - required:
-            - endpoint@1
+              - endpoint@1
           - required:
-            - endpoint@2
+              - endpoint@2
           - required:
-            - endpoint@3
+              - endpoint@3
 
         additionalProperties: false
 
Documentation/devicetree/bindings/media/ti,vpe.yaml +1 -1
index f3a8a350e85f..ef473f287399 100644
@@ -17,7 +17,7 @@ description: |-
 
 properties:
   compatible:
-      const: ti,dra7-vpe
+    const: ti,dra7-vpe
 
   reg:
     items:
Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +3 -3
index c9e6c22cb5be..445e46feda69 100644
@@ -25,9 +25,9 @@ properties:
   compatible:
     items:
       - enum:
-        - fsl,imx8mn-ddrc
-        - fsl,imx8mm-ddrc
-        - fsl,imx8mq-ddrc
+          - fsl,imx8mn-ddrc
+          - fsl,imx8mm-ddrc
+          - fsl,imx8mq-ddrc
       - const: fsl,imx8m-ddrc
 
   reg:
Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +2 -2
index ddf190cb800b..e675611f80d0 100644
@@ -66,8 +66,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 2
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2 -2
index 590849ee9f32..4acda7ce3b44 100644
@@ -102,8 +102,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 16
+          minimum: 0
+          maximum: 16
 
     required:
       - compatible
Documentation/devicetree/bindings/mfd/syscon.yaml +6 -6
index 39375e4313d2..7a39486b215a 100644
@@ -33,13 +33,13 @@ properties:
   compatible:
     anyOf:
       - items:
-        - enum:
-          - allwinner,sun8i-a83t-system-controller
-          - allwinner,sun8i-h3-system-controller
-          - allwinner,sun8i-v3s-system-controller
-          - allwinner,sun50i-a64-system-controller
+          - enum:
+              - allwinner,sun8i-a83t-system-controller
+              - allwinner,sun8i-h3-system-controller
+              - allwinner,sun8i-v3s-system-controller
+              - allwinner,sun50i-a64-system-controller
 
-        - const: syscon
+          - const: syscon
 
       - contains:
           const: syscon
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +1 -1
index 2f45dd0d04db..d43a0c557a44 100644
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-         - socionext,uniphier-sd4hc
+          - socionext,uniphier-sd4hc
       - const: cdns,sd4hc
 
   reg:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +8 -8
index 89c3edd6a728..4ee3ed6efab4 100644
@@ -30,21 +30,21 @@ properties:
       - items:
           - enum:
             # for Rockchip PX30
-            - rockchip,px30-dw-mshc
+              - rockchip,px30-dw-mshc
             # for Rockchip RK3036
-            - rockchip,rk3036-dw-mshc
+              - rockchip,rk3036-dw-mshc
             # for Rockchip RK322x
-            - rockchip,rk3228-dw-mshc
+              - rockchip,rk3228-dw-mshc
             # for Rockchip RK3308
-            - rockchip,rk3308-dw-mshc
+              - rockchip,rk3308-dw-mshc
             # for Rockchip RK3328
-            - rockchip,rk3328-dw-mshc
+              - rockchip,rk3328-dw-mshc
             # for Rockchip RK3368
-            - rockchip,rk3368-dw-mshc
+              - rockchip,rk3368-dw-mshc
             # for Rockchip RK3399
-            - rockchip,rk3399-dw-mshc
+              - rockchip,rk3399-dw-mshc
             # for Rockchip RV1108
-            - rockchip,rv1108-dw-mshc
+              - rockchip,rv1108-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +7 -7
index cdfac9b4411b..8d6413f48823 100644
@@ -35,15 +35,15 @@ properties:
     oneOf:
       - const: host
       - items:
-        - const: host
-        - const: bridge
+          - const: host
+          - const: bridge
       - items:
-        - const: host
-        - const: hw
+          - const: host
+          - const: hw
       - items:
-        - const: host
-        - const: bridge
-        - const: hw
+          - const: host
+          - const: bridge
+          - const: hw
 
   resets:
     minItems: 1
Documentation/devicetree/bindings/mtd/denali,nand.yaml +2 -2
index 46e6b6726bc0..c07b91592cbd 100644
@@ -54,8 +54,8 @@ properties:
         reg:  register reset
     oneOf:
       - items:
-        - const: nand
-        - const: reg
+          - const: nand
+          - const: reg
       - const: nand
       - const: reg
 
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +2 -2
index db36b4d86484..c7c9ad4e3f9f 100644
@@ -19,8 +19,8 @@ properties:
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
-        - const: allwinner,sun50i-h6-emac
-        - const: allwinner,sun50i-a64-emac
+          - const: allwinner,sun50i-h6-emac
+          - const: allwinner,sun50i-a64-emac
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +26 -26

64 lines not on this page · raw message

Documentation/devicetree/bindings/net/renesas,ether.yaml +2 -2
index 7f84df9790e2..2eaa8799e002 100644
@@ -40,8 +40,8 @@ properties:
 
   reg:
     items:
-       - description: E-DMAC/feLic registers
-       - description: TSU registers
+      - description: E-DMAC/feLic registers
+      - description: TSU registers
     minItems: 1
 
   interrupts:
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +6 -6
index 976f139bb66e..8fc8d3be303b 100644
@@ -23,14 +23,14 @@ properties:
     oneOf:
       - const: ti,cpsw-switch
       - items:
-         - const: ti,am335x-cpsw-switch
-         - const: ti,cpsw-switch
+          - const: ti,am335x-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,am4372-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,am4372-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,dra7-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,dra7-cpsw-switch
+          - const: ti,cpsw-switch
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +13 -14
index 242ac4935a4b..2ea14ab29254 100644
@@ -18,25 +18,24 @@ allOf:
 properties:
   compatible:
     oneOf:
-       - const: ti,davinci_mdio
-       - items:
-         - const: ti,keystone_mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,am4372-mdio
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
+      - const: ti,davinci_mdio
+      - items:
+          - const: ti,keystone_mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,am4372-mdio
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
 
   reg:
     maxItems: 1
 
   bus_freq:
-      maximum: 2500000
-      description:
-        MDIO Bus frequency
+    maximum: 2500000
+    description: MDIO Bus frequency
 
   ti,hwmods:
     description: TI hwmod name
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +1 -1
index 9a346d6290d9..77bb5309918e 100644
@@ -23,7 +23,7 @@ description: |+
 
 properties:
   compatible:
-      const: intel,lgm-emmc-phy
+    const: intel,lgm-emmc-phy
 
   "#phy-cells":
     const: 0
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +8 -8
index ea7f32905172..4fe64f4dd594 100644
@@ -49,17 +49,17 @@ properties:
       are available.
     oneOf:
       - items:
-        - const: timers
+          - const: timers
       - items:
-        - const: timers
-        - const: pwm-tclk0
+          - const: timers
+          - const: pwm-tclk0
       - items:
-        - const: timers
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk1
       - items:
-        - const: timers
-        - const: pwm-tclk0
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk0
+          - const: pwm-tclk1
 
   interrupts:
     description:
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +1 -1
index c0d83865e933..4ff4d3df0a06 100644
@@ -25,7 +25,7 @@ properties:
     maxItems: 3
 
   resets:
-     maxItems: 1
+    maxItems: 1
 
   st,syscfg-holdboot:
     allOf:
Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +3 -1
index 512a33bdb208..dfce6738b033 100644
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: BCM7216 RESCAL reset controller
 
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
 
 maintainers:
   - Florian Fainelli <[email protected]>
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +19 -19
index 48c6cafca90c..57b087574aa1 100644
@@ -38,10 +38,10 @@ properties:
           minItems: 3
           maxItems: 3
     description: |
-       Phandle/offset/mask triplet. The phandle to pwrcfg used to
-       access control register at offset, and change the dbp (Disable Backup
-       Protection) bit represented by the mask, mandatory to disable/enable backup
-       domain (RTC registers) write protection.
+      Phandle/offset/mask triplet. The phandle to pwrcfg used to
+      access control register at offset, and change the dbp (Disable Backup
+      Protection) bit represented by the mask, mandatory to disable/enable backup
+      domain (RTC registers) write protection.
 
   assigned-clocks:
     description: |
@@ -78,14 +78,14 @@ allOf:
             const: st,stm32h7-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-       required:
-         - clock-names
-         - st,syscfg
+      required:
+        - clock-names
+        - st,syscfg
 
   - if:
       properties:
@@ -94,16 +94,16 @@ allOf:
             const: st,stm32mp1-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-         assigned-clocks: false
-         assigned-clock-parents: false
+        assigned-clocks: false
+        assigned-clock-parents: false
 
-       required:
-         - clock-names
+      required:
+        - clock-names
 
 required:
   - compatible
Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +8 -8
index d4178ab0d675..75ebc9952a99 100644
@@ -24,18 +24,18 @@ properties:
     oneOf:
       - description: Always-on power domain UART controller
         items:
-        - enum:
+          - enum:
+              - amlogic,meson6-uart
+              - amlogic,meson8-uart
+              - amlogic,meson8b-uart
+              - amlogic,meson-gx-uart
+          - const: amlogic,meson-ao-uart
+      - description: Everything-Else power domain UART controller
+        enum:
           - amlogic,meson6-uart
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
-        - const: amlogic,meson-ao-uart
-      - description: Everything-Else power domain UART controller
-        enum:
-        - amlogic,meson6-uart
-        - amlogic,meson8-uart
-        - amlogic,meson8b-uart
-        - amlogic,meson-gx-uart
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/serial/rs485.yaml +9 -8
index d4beaf11222d..2b8261ea6d9c 100644
@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
-  -  Rob Herring <[email protected]>
+  - Rob Herring <[email protected]>
 
 properties:
   rs485-rts-delay:
@@ -37,9 +36,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
 
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
-   description: enables the receiving of data even while sending data.
-   $ref: /schemas/types.yaml#/definitions/flag
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+...
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +5 -5
index cb008fd188d8..02b2d5ba01d6 100644
@@ -26,11 +26,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,meson8-canvas
-          - amlogic,meson8b-canvas
-          - amlogic,meson8m2-canvas
-        - const: amlogic,canvas
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
       - const: amlogic,canvas # GXBB and newer SoCs
 
   reg:
Documentation/devicetree/bindings/sound/renesas,fsi.yaml +8 -8
index d1b65554e681..91cf4176abd5 100644
@@ -17,16 +17,16 @@ properties:
     oneOf:
       # for FSI2 SoC
       - items:
-        - enum:
-          - renesas,fsi2-sh73a0
-          - renesas,fsi2-r8a7740
-        - enum:
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,fsi2-sh73a0
+              - renesas,fsi2-r8a7740
+          - enum:
+              - renesas,sh_fsi2
       # for Generic
       - items:
-        - enum:
-          - renesas,sh_fsi
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,sh_fsi
+              - renesas,sh_fsi2
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +5 -5
index 0cf470eaf2a0..406286149a6b 100644
@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
 maintainers:
- - Mukesh Savaliya <[email protected]>
- - Akash Asthana <[email protected]>
+  - Mukesh Savaliya <[email protected]>
+  - Akash Asthana <[email protected]>
 
-description:
- The QSPI controller allows SPI protocol communication in single, dual, or quad
- wire transmission modes for read/write access to slaves such as NOR flash.
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
 
 allOf:
   - $ref: /spi/spi-controller.yaml#
Documentation/devicetree/bindings/spi/renesas,hspi.yaml +2 -2
index c429cf4bea5b..f492cb9fea12 100644
@@ -16,8 +16,8 @@ properties:
   compatible:
     items:
       - enum:
-        - renesas,hspi-r8a7778 # R-Car M1A
-        - renesas,hspi-r8a7779 # R-Car H1
+          - renesas,hspi-r8a7778 # R-Car M1A
+          - renesas,hspi-r8a7779 # R-Car H1
       - const: renesas,hspi
 
   reg:
Documentation/devicetree/bindings/spi/spi-pl022.yaml +1 -1
index dfb697c69341..22ba4e90655b 100644
@@ -51,7 +51,7 @@ properties:
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
-               priority to minimise the transfer latency on the bus (boolean)
+      priority to minimise the transfer latency on the bus (boolean)
     type: boolean
 
   dmas:
Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +2 -2
index 3665a5fe6b7f..1a342ce1f798 100644
@@ -24,8 +24,8 @@ properties:
 
   reg-names:
     items:
-     - const: qspi
-     - const: qspi_mm
+      - const: qspi
+      - const: qspi_mm
 
   clocks:
     maxItems: 1
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +32 -32

95 lines not on this page · raw message

Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +5 -5
index e43ec50bda37..999c6b365f1d 100644
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal
 
 properties:
   compatible:
-      items:
-        - enum:
-            - amlogic,g12a-cpu-thermal
-            - amlogic,g12a-ddr-thermal
-        - const: amlogic,g12a-thermal
+    items:
+      - enum:
+          - amlogic,g12a-cpu-thermal
+          - amlogic,g12a-ddr-thermal
+      - const: amlogic,g12a-thermal
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +2 -2
index fa255672e8e5..135186f83925 100644
@@ -28,10 +28,10 @@ properties:
               - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv7-timer
+              - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv8-timer
+              - arm,armv8-timer
 
   interrupts:
     items:
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +2 -2
index 582bbef62b95..6ff718ede184 100644
@@ -20,7 +20,7 @@ properties:
   compatible:
     items:
       - enum:
-        - arm,armv7-timer-mem
+          - arm,armv7-timer-mem
 
   reg:
     maxItems: 1
@@ -77,7 +77,7 @@ patternProperties:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
         maxItems: 2
         items:
Documentation/devicetree/bindings/usb/dwc2.yaml +4 -4
index 0d6d850a7f17..fb2f62aef5fa 100644
@@ -62,14 +62,14 @@ properties:
 
   resets:
     items:
-     - description: common reset
-     - description: ecc reset
+      - description: common reset
+      - description: ecc reset
     minItems: 1
 
   reset-names:
     items:
-     - const: dwc2
-     - const: dwc2-ecc
+      - const: dwc2
+      - const: dwc2-ecc
     minItems: 1
 
   phys:

--
2.20.1

author maintainer
#1 lore raw

PATCH 2/2 dt-bindings: Remove cases of 'allOf' containing a '$ref'

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

---
 .../devicetree/bindings/arm/cpus.yaml         |  81 +++---
 .../devicetree/bindings/arm/l2c2x0.yaml       |  87 +++---
 .../devicetree/bindings/arm/psci.yaml         |  15 +-
 .../bindings/arm/samsung/exynos-chipid.yaml   |   5 +-
 .../bus/allwinner,sun50i-a64-de2.yaml         |   5 +-
 .../bindings/clock/fixed-factor-clock.yaml    |   5 +-
 .../bindings/connector/usb-connector.yaml     |  28 +-
 .../bindings/crypto/st,stm32-hash.yaml        |   9 +-
 .../allwinner,sun4i-a10-display-engine.yaml   |   7 +-
 .../display/allwinner,sun4i-a10-tcon.yaml     |   5 +-
 .../bindings/display/panel/panel-common.yaml  |   5 +-
 .../devicetree/bindings/dma/dma-common.yaml   |   3 +-
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  18 +-
 .../devicetree/bindings/eeprom/at24.yaml      |  11 +-
 .../devicetree/bindings/example-schema.yaml   |  17 +-
 .../bindings/hwmon/adi,ltc2947.yaml           |  32 +--
 .../devicetree/bindings/hwmon/ti,tmp513.yaml  |  21 +-
 .../devicetree/bindings/i2c/st,stm32-i2c.yaml |   9 +-
 .../bindings/iio/adc/adi,ad7124.yaml          |   5 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |   3 +-
 .../bindings/iio/adc/microchip,mcp3911.yaml   |   7 +-
 .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml  |  31 +-
 .../bindings/iio/light/tsl2772.yaml           |  13 +-
 .../bindings/iio/temperature/adi,ltc2983.yaml |  56 ++--
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |   5 +-
 .../devicetree/bindings/input/input.yaml      |   9 +-
 .../interrupt-controller/arm,gic-v3.yaml      |  39 ++-
 .../devicetree/bindings/iommu/arm,smmu.yaml   |   3 +-
 .../devicetree/bindings/leds/common.yaml      |  13 +-
 .../devicetree/bindings/leds/leds-gpio.yaml   |   3 +-
 .../bindings/leds/rohm,bd71828-leds.yaml      |  10 +-
 .../bindings/mailbox/st,stm32-ipcc.yaml       |   5 +-
 .../bindings/media/amlogic,gx-vdec.yaml       |   6 +-
 .../media/amlogic,meson-gx-ao-cec.yaml        |   3 +-
 .../devicetree/bindings/media/rc.yaml         | 265 +++++++++---------
 .../bindings/media/renesas,vin.yaml           |   7 +-
 .../memory-controllers/exynos-srom.yaml       |  14 +-
 .../nvidia,tegra124-emc.yaml                  |   9 +-
 .../nvidia,tegra124-mc.yaml                   |   3 +-
 .../nvidia,tegra30-emc.yaml                   |   9 +-
 .../memory-controllers/nvidia,tegra30-mc.yaml |   3 +-
 .../bindings/mfd/allwinner,sun4i-a10-ts.yaml  |  20 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  33 ++-
 .../devicetree/bindings/mfd/st,stpmic1.yaml   |   9 +-
 .../devicetree/bindings/mfd/syscon.yaml       |   5 +-
 .../devicetree/bindings/mmc/aspeed,sdhci.yaml |   4 +-
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  77 +++--
 .../bindings/mmc/mmc-controller.yaml          |  37 ++-
 .../bindings/mmc/rockchip-dw-mshc.yaml        |   6 +-
 .../bindings/mmc/synopsys-dw-mshc-common.yaml |  14 +-
 .../mtd/allwinner,sun4i-a10-nand.yaml         |  13 +-
 .../bindings/mtd/nand-controller.yaml         |  27 +-
 .../bindings/net/can/bosch,m_can.yaml         |  59 ++--
 .../bindings/net/ethernet-controller.yaml     |  34 +--
 .../devicetree/bindings/net/qca,ar803x.yaml   |  17 +-
 .../devicetree/bindings/net/snps,dwmac.yaml   |  22 +-
 .../bindings/net/ti,cpsw-switch.yaml          |   3 +-
 .../bindings/net/ti,davinci-mdio.yaml         |   7 +-
 .../bindings/pci/intel-gw-pcie.yaml           |   7 +-
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  12 +-
 .../pinctrl/aspeed,ast2400-pinctrl.yaml       |  37 ++-
 .../pinctrl/aspeed,ast2500-pinctrl.yaml       |  45 ++-
 .../pinctrl/aspeed,ast2600-pinctrl.yaml       | 108 ++++---
 .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml  |  31 +-
 .../bindings/pinctrl/intel,lgm-io.yaml        |   4 +-
 .../bindings/pinctrl/pinmux-node.yaml         |   3 +-
 .../bindings/pinctrl/st,stm32-pinctrl.yaml    |  56 ++--
 .../bindings/power/amlogic,meson-ee-pwrc.yaml |   3 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  |  11 +-
 .../bindings/regulator/gpio-regulator.yaml    |  35 ++-
 .../bindings/regulator/mps,mpq7920.yaml       |  31 +-
 .../bindings/regulator/regulator.yaml         |   5 +-
 .../regulator/rohm,bd71828-regulator.yaml     |  34 +--
 .../bindings/regulator/st,stm32-booster.yaml  |   3 +-
 .../regulator/st,stm32mp1-pwr-reg.yaml        |   3 +-
 .../bindings/remoteproc/st,stm32-rproc.yaml   |   9 +-
 .../bindings/reset/intel,rcu-gw.yaml          |   3 +-
 .../devicetree/bindings/riscv/cpus.yaml       |  20 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml |   9 +-
 .../devicetree/bindings/serial/pl011.yaml     |  10 +-
 .../devicetree/bindings/serial/rs485.yaml     |  26 +-
 .../bindings/serial/samsung_uart.yaml         |   5 +-
 .../bindings/sound/adi,adau7118.yaml          |  20 +-
 .../sound/allwinner,sun4i-a10-codec.yaml      |  41 ++-
 .../bindings/sound/qcom,wcd934x.yaml          |   3 +-
 .../bindings/spi/renesas,sh-msiof.yaml        |  42 ++-
 .../bindings/spi/spi-controller.yaml          |  14 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  55 ++--
 .../devicetree/bindings/spi/spi-sifive.yaml   |  14 +-
 .../bindings/thermal/qcom-tsens.yaml          |   7 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |   7 +-
 91 files changed, 881 insertions(+), 1103 deletions(-)
Documentation/devicetree/bindings/arm/cpus.yaml +40 -41
index a01814765ddb..3338bae4cee3 100644
@@ -171,49 +171,48 @@ properties:
       - qcom,scorpion
 
   enable-method:
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/string'
-      - oneOf:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    oneOf:
           # On ARM v8 64-bit this property is required
-          - enum:
-              - psci
-              - spin-table
+      - enum:
+          - psci
+          - spin-table
           # On ARM 32-bit systems this property is optional
-          - enum:
-              - actions,s500-smp
-              - allwinner,sun6i-a31
-              - allwinner,sun8i-a23
-              - allwinner,sun9i-a80-smp
-              - allwinner,sun8i-a83t-smp
-              - amlogic,meson8-smp
-              - amlogic,meson8b-smp
-              - arm,realview-smp
-              - aspeed,ast2600-smp
-              - brcm,bcm11351-cpu-method
-              - brcm,bcm23550
-              - brcm,bcm2836-smp
-              - brcm,bcm63138
-              - brcm,bcm-nsp-smp
-              - brcm,brahma-b15
-              - marvell,armada-375-smp
-              - marvell,armada-380-smp
-              - marvell,armada-390-smp
-              - marvell,armada-xp-smp
-              - marvell,98dx3236-smp
-              - marvell,mmp3-smp
-              - mediatek,mt6589-smp
-              - mediatek,mt81xx-tz-smp
-              - qcom,gcc-msm8660
-              - qcom,kpss-acc-v1
-              - qcom,kpss-acc-v2
-              - renesas,apmu
-              - renesas,r9a06g032-smp
-              - rockchip,rk3036-smp
-              - rockchip,rk3066-smp
-              - socionext,milbeaut-m10v-smp
-              - ste,dbx500-smp
-              - ti,am3352
-              - ti,am4372
+      - enum:
+          - actions,s500-smp
+          - allwinner,sun6i-a31
+          - allwinner,sun8i-a23
+          - allwinner,sun9i-a80-smp
+          - allwinner,sun8i-a83t-smp
+          - amlogic,meson8-smp
+          - amlogic,meson8b-smp
+          - arm,realview-smp
+          - aspeed,ast2600-smp
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm2836-smp
+          - brcm,bcm63138
+          - brcm,bcm-nsp-smp
+          - brcm,brahma-b15
+          - marvell,armada-375-smp
+          - marvell,armada-380-smp
+          - marvell,armada-390-smp
+          - marvell,armada-xp-smp
+          - marvell,98dx3236-smp
+          - marvell,mmp3-smp
+          - mediatek,mt6589-smp
+          - mediatek,mt81xx-tz-smp
+          - qcom,gcc-msm8660
+          - qcom,kpss-acc-v1
+          - qcom,kpss-acc-v2
+          - renesas,apmu
+          - renesas,r9a06g032-smp
+          - rockchip,rk3036-smp
+          - rockchip,rk3066-smp
+          - socionext,milbeaut-m10v-smp
+          - ste,dbx500-smp
+          - ti,am3352
+          - ti,am4372
 
   cpu-release-addr:
     $ref: '/schemas/types.yaml#/definitions/uint64'
Documentation/devicetree/bindings/arm/l2c2x0.yaml +37 -50

151 lines not on this page · raw message

Documentation/devicetree/bindings/arm/psci.yaml +7 -8
index 9247b58c26fc..4f9b361aefd6 100644
@@ -69,13 +69,12 @@ properties:
 
   method:
     description: The method of calling the PSCI firmware.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - enum:
-          # SMC #0, with the register assignments specified in this binding.
-          - smc
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+
+      - smc
           # HVC #0, with the register assignments specified in this binding.
-          - hvc
+      - hvc
 
   cpu_suspend:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -107,8 +106,8 @@ properties:
 
 patternProperties:
   "^power-domain-":
-    allOf:
-      - $ref: "../power/power-domain.yaml#"
+    $ref: "../power/power-domain.yaml#"
+
     type: object
     description: |
       ARM systems can have multiple cores, sometimes in an hierarchical
Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2 -3
index 0425d333b50d..f99c0c6df21b 100644
@@ -22,9 +22,8 @@ properties:
       Adaptive Supply Voltage bin selection. This can be used
       to determine the ASV bin of an SoC if respective information
       is missing in the CHIPID registers or in the OTP memory.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
 
 required:
   - compatible
Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +2 -3
index f0b3d30fbb76..0503651cd214 100644
@@ -31,12 +31,11 @@ properties:
     maxItems: 1
 
   allwinner,sram:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/phandle-array
-      - maxItems: 1
     description:
       The SRAM that needs to be claimed to access the display engine
       bus.
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    maxItems: 1
 
   ranges: true
 
Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +2 -3
index b567f8092f8c..f415845b38dd 100644
@@ -24,9 +24,8 @@ properties:
 
   clock-div:
     description: Fixed divider
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
 
   clock-mult:
     description: Fixed multiplier
Documentation/devicetree/bindings/connector/usb-connector.yaml +13 -15
index 369c58e22a06..03b92b6f35fa 100644
@@ -27,8 +27,8 @@ properties:
     description: Size of the connector, should be specified in case of
       non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
       connectors.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - mini
       - micro
@@ -57,8 +57,8 @@ properties:
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - source
       - sink
@@ -66,18 +66,18 @@ properties:
 
   try-power-role:
     description: Preferred power role.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
-     - source
-     - sink
-     - dual
+      - source
+      - sink
+      - dual
 
   data-role:
     description: Data role if Type C connector supports USB data. "dual" refers
       Dual Role Device (DRD).
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - host
       - device
@@ -95,8 +95,7 @@ properties:
       defined in dt-bindings/usb/pd.h.
     minItems: 1
     maxItems: 7
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   sink-pdos:
     description: An array of u32 with each entry providing supported power sink
@@ -108,8 +107,7 @@ properties:
       in dt-bindings/usb/pd.h.
     minItems: 1
     maxItems: 7
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   op-sink-microwatt:
     description: Sink required operating power in microwatt, if source can't
Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +4 -5
index 57ae1c0b6d18..6dd658f0912c 100644
@@ -36,11 +36,10 @@ properties:
 
   dma-maxburst:
     description: Set number of maximum dma burst supported
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 2
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
 
 required:
   - compatible
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +3 -4
index 944ff2f1cf93..e77523b02fad 100644
@@ -66,10 +66,9 @@ properties:
       - allwinner,sun50i-h6-display-engine
 
   allwinner,pipelines:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +2 -3
index 87cb77b32ee3..4c15a2644a7c 100644
@@ -71,11 +71,10 @@ properties:
     maxItems: 4
 
   clock-output-names:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - maxItems: 1
     description:
       Name of the LCD pixel clock created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    maxItems: 1
 
   dmas:
     maxItems: 1
Documentation/devicetree/bindings/display/panel/panel-common.yaml +2 -3
index ed051ba12084..b05573de08f3 100644
@@ -48,9 +48,8 @@ properties:
   rotation:
     description:
       Display rotation in degrees counter clockwise (0,90,180,270)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 90, 180, 270 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
 
   # Display Timings
   panel-timing:
Documentation/devicetree/bindings/dma/dma-common.yaml +1 -2
index 02a34ba2b49b..c36592683340 100644
@@ -31,8 +31,7 @@ properties:
       kernel. i.e. first channel corresponds to LSB.
       The first item in the array is for channels 0-31, the second is for
       channels 32-63, etc.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minItems: 1
       # Should be enough
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +6 -12
index 85056982a242..10b74095935f 100644
@@ -78,25 +78,21 @@ properties:
 
   ti,sci:
     description: phandle to TI-SCI compatible System controller node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,sci-dev-id:
     description: TI-SCI device id of UDMAP
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,ringacc:
     description: phandle to the ring accelerator node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,sci-rm-range-tchan:
     description: |
       Array of UDMA tchan resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -105,8 +101,7 @@ properties:
     description: |
       Array of UDMA rchan resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -115,8 +110,7 @@ properties:
     description: |
       Array of UDMA rflow resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
Documentation/devicetree/bindings/eeprom/at24.yaml +4 -7
index a15787e504f0..de513fe333a7 100644
@@ -118,14 +118,13 @@ properties:
     maxItems: 1
 
   pagesize:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The length of the pagesize for writing. Please consult the
       manual of your device, that value varies a lot. A wrong value
       may result in data loss! If not specified, a safety value of
       '1' is used which will be very slow.
-    enum: [ 1, 8, 16, 32, 64, 128, 258 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 258]
     default: 1
 
   read-only:
@@ -148,18 +147,16 @@ properties:
   wp-gpios: true
 
   address-width:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of address bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 8
     enum: [ 8, 16 ]
 
   num-addresses:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Total number of i2c slave addresses this device takes.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 1
     minimum: 1
     maximum: 8
Documentation/devicetree/bindings/example-schema.yaml +6 -11
index 62811a1b5058..c9534d2164a2 100644
@@ -138,12 +138,8 @@ properties:
   # 'description'.
   vendor,int-property:
     description: Vendor specific properties must have a description
-    # 'allOf' is the json-schema way of subclassing a schema. Here the base
-    # type schema is referenced and then additional constraints on the values
-    # are added.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [2, 4, 6, 8, 10]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4, 6, 8, 10]
 
   vendor,bool-property:
     description: Vendor specific properties must have a description. Boolean
@@ -154,11 +150,10 @@ properties:
   vendor,string-array-property:
     description: Vendor specific properties should reference a type in the
       core schema.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - items:
-          - enum: [ foo, bar ]
-          - enum: [ baz, boo ]
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - enum: [foo, bar]
+      - enum: [baz, boo]
 
   vendor,property-in-standard-units-microvolt:
     description: Vendor specific properties having a standard unit suffix
Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +14 -18
index 44a63fffb4be..eef614962b10 100644
@@ -38,20 +38,18 @@ properties:
       the accumulated values, this entry can also have two items which sets
       energy1/charge1 and energy2/charger2 respectively. Check table 12 of the
       datasheet for more information on the supported options.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          enum: [0, 1, 2, 3]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2, 3]
+      default: 0
 
   adi,accumulation-deadband-microamp:
     description:
       This property controls the Accumulation Dead band which allows to set the
       level of current below which no accumulation takes place.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     default: 0
 
@@ -61,8 +59,7 @@ properties:
       active high, setting it to zero makets it active low. When this property
       is present, the GPIO is automatically configured as output and set to
       control a fan as a function of measured temperature.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
     default: 0
 
@@ -74,13 +71,12 @@ properties:
       registers. Check table 13 of the datasheet for more information on the
       supported options. This property cannot be used together with
       adi,gpio-out-pol.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          enum: [0, 1, 2]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2]
+      default: 0
 
 required:
   - compatible
Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +9 -12
index 3f043e943668..90b2fa3f7752 100644
@@ -45,16 +45,14 @@ properties:
       The gain value for the PGA function. This is 8, 4, 2 or 1.
       The PGA gain affect the shunt voltage range.
       The range will be equal to: pga-gain * 40mV
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
     default: 8
 
   ti,bus-range-microvolt:
     description: |
       This is the operating range of the bus voltage in microvolt
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [16000000, 32000000]
     default: 32000000
 
@@ -63,14 +61,13 @@ properties:
       Array of three(TMP513) or two(TMP512) n-Factor value for each remote
       temperature channel.
       See datasheet Table 11 for n-Factor range list and value interpretation.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-array
-      - minItems: 2
-        maxItems: 3
-        items:
-          default: 0x00
-          minimum: 0x00
-          maximum: 0xFF
+    $ref: /schemas/types.yaml#definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      default: 0x00
+      minimum: 0x00
+      maximum: 0xFF
 
 required:
   - compatible
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +4 -5
index 900ec1ab6a47..96630f225207 100644
@@ -30,11 +30,10 @@ allOf:
                        Fast Mode Plus speed is selected by slave.
                        Format is phandle to syscfg / register offset within
                        syscfg / register bitmask for FMP bit.
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-            - items:
-                minItems: 3
-                maxItems: 3
+          $ref: "/schemas/types.yaml#/definitions/phandle-array"
+          items:
+            minItems: 3
+            maxItems: 3
 
   - if:
       properties:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -3
index 97087a45ce54..deb34deff0e8 100644
@@ -83,9 +83,8 @@ patternProperties:
           1: REFIN2(+)/REFIN2(−).
           3: AVDD
           If this field is left empty, internal reference is selected.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 3]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
 
       diff-channels:
         description: see Documentation/devicetree/bindings/iio/adc/adc.txt
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +1 -2
index 97f521d654ea..6a991e9f78e2 100644
@@ -18,8 +18,7 @@ properties:
 
   vref-supply:
     description: phandle to an external regulator providing the reference voltage
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   reg:
     description: spi chipselect number according to the usual spi bindings
Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +3 -4
index 8ffeceb6abae..95ab285f4eba 100644
@@ -38,10 +38,9 @@ properties:
 
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
 
   vref-supply:
     description: |
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +13 -18
index b1627441a0b2..d69ca492d020 100644
@@ -95,16 +95,14 @@ patternProperties:
           On stm32h7 and stm32mp1:
           - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
           - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string-array
+        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |
@@ -112,11 +110,10 @@ patternProperties:
           - 0: FastSinC
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - items:
-              minimum: 0
-              maximum: 5
+        $ref: /schemas/types.yaml#/definitions/uint32
+        items:
+          minimum: 0
+          maximum: 5
 
       "#io-channel-cells":
         const: 1
@@ -129,9 +126,8 @@ patternProperties:
           - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
           - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
         items:
-          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+          enum: [SPI_R, SPI_F, MANCH_R, MANCH_F]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-channel-clk-src:
         description: |
@@ -141,9 +137,8 @@ patternProperties:
           - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
           - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
         items:
-          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+          enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-alt-channel:
         description:
Documentation/devicetree/bindings/iio/light/tsl2772.yaml +6 -7
index e8f7d1ada57b..d81229857944 100644
@@ -33,13 +33,12 @@ properties:
 
   amstaos,proximity-diodes:
     description: Proximity diodes to enable
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 2
-        items:
-          minimum: 0
-          maximum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
 
   interrupts:
     maxItems: 1
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +21 -35

140 lines not on this page · raw message

Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -3
index 512a6af5aa42..cffd02028d02 100644
@@ -42,9 +42,8 @@ patternProperties:
         description: Keycode to emit
 
       channel:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
         description: ADC Channel this key is attached to
 
       voltage:
Documentation/devicetree/bindings/input/input.yaml +4 -5
index 6d519046b3af..8edcb3c31270 100644
@@ -18,11 +18,10 @@ properties:
     description:
       Specifies an array of numeric keycode values to be used for reporting
       button presses.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minimum: 0
-          maximum: 0xff
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minimum: 0
+      maximum: 0xff
 
   poll-interval:
     description: Poll interval time in milliseconds.
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +17 -22
index 66aacd106503..1ecd1831cf02 100644
@@ -91,18 +91,16 @@ properties:
     description:
       If using padding pages, specifies the stride of consecutive
       redistributors. Must be a multiple of 64kB.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint64
-      - multipleOf: 0x10000
-        exclusiveMinimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint64
+    multipleOf: 0x10000
+    exclusiveMinimum: 0
 
   "#redistributor-regions":
     description:
       The number of independent contiguous regions occupied by the
       redistributors. Required if more than one such region is present.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 4096   # Should be enough?
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4096
 
   msi-controller:
     description:
@@ -114,22 +112,20 @@ properties:
       A list of pairs <intid span>, where "intid" is the first SPI of a range
       that can be used an MBI, and "span" the size of that range. Multiple
       ranges can be provided.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-      - items:
-          minItems: 2
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
 
   mbi-alias:
     description:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 1
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      maxItems: 2
 
   ppi-partitions:
     type: object
@@ -188,11 +184,10 @@ patternProperties:
         description:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minItems: 2
-              maxItems: 2
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 2
+          maxItems: 2
 
     required:
       - compatible
Documentation/devicetree/bindings/iommu/arm,smmu.yaml +1 -2
index 6515dbe47508..3aa554878b90 100644
@@ -56,8 +56,7 @@ properties:
 
   '#global-interrupts':
     description: The number of global interrupts exposed by the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
 
Documentation/devicetree/bindings/leds/common.yaml +5 -8
index 4c270fde4567..a2a541bca73c 100644
@@ -41,8 +41,7 @@ properties:
       Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
       the header include/dt-bindings/leds/common.h. If there is no matching
       LED_COLOR_ID available, add a new one.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#definitions/uint32
     minimum: 0
     maximum: 8
 
@@ -67,8 +66,7 @@ properties:
       produced where the LED momentarily turns off (or on). The "keep" setting
       will keep the LED at whatever its current state is, without producing a
       glitch.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
     enum:
       - on
       - off
@@ -79,8 +77,8 @@ properties:
     description:
       This parameter, if present, is a string defining the trigger assigned to
       the LED.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
         # LED will act as a back-light, controlled by the framebuffer system
       - backlight
@@ -111,8 +109,7 @@ properties:
           brightness and duration (in ms).  The exact format is
           described in:
           Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-matrix
+    $ref: /schemas/types.yaml#definitions/uint32-matrix
     items:
       minItems: 2
       maxItems: 2
Documentation/devicetree/bindings/leds/leds-gpio.yaml +1 -2
index 0e75b185dd19..7ad2baeda0b0 100644
@@ -24,8 +24,7 @@ patternProperties:
   "(^led-[0-9a-f]$|led)":
     type: object
 
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#
 
     properties:
       gpios:
Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +5 -5
index 90edf9d33b33..aa715edd93b0 100644
@@ -34,11 +34,11 @@ patternProperties:
         #- $ref: "common.yaml#"
       rohm,led-compatible:
         description: LED identification string
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/string"
-          - enum:
-            - bd71828-ambled
-            - bd71828-grnled
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum:
+
+          - bd71828-ambled
+          - bd71828-grnled
       function:
         description:
           Purpose of LED as defined in dt-bindings/leds/common.h
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +2 -3
index db851541d619..3b7ab61a144f 100644
@@ -49,9 +49,8 @@ properties:
 
   st,proc-id:
     description: Processor id using the mailbox (0 or 1)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
 required:
   - compatible
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +2 -4
index 5a1da4029c37..b902495d278b 100644
@@ -77,13 +77,11 @@ properties:
 
   amlogic,ao-sysctrl:
     description: should point to the AOBUS sysctrl node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   amlogic,canvas:
     description: should point to a canvas provider node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 allOf:
   - if:
Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +1 -2
index 95ffa8bc0533..c08e2ddf292a 100644
@@ -35,8 +35,7 @@ properties:
 
   hdmi-phandle:
     description: phandle to the HDMI controller
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 allOf:
   - if:
Documentation/devicetree/bindings/media/rc.yaml +132 -133

268 lines not on this page · raw message

Documentation/devicetree/bindings/media/renesas,vin.yaml +3 -4
index ecc09f1124d4..6d473cdcb16a 100644
@@ -116,10 +116,9 @@ properties:
   #The per-board settings for Gen3 and RZ/G2 platforms:
   renesas,id:
     description: VIN channel number
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 15
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
 
   ports:
     type: object
Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +6 -8
index cdfe3f7f0ea9..0dc008e816e2 100644
@@ -51,11 +51,10 @@ patternProperties:
         maxItems: 1
 
       reg-io-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2]
 
       samsung,srom-page-mode:
         description:
@@ -64,11 +63,10 @@ patternProperties:
         type: boolean
 
       samsung,srom-timing:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minItems: 6
-              maxItems: 6
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 6
+          maxItems: 6
         description: |
           Array of 6 integers, specifying bank timings in the following order:
           Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +3 -6
index 3e0a8a92d652..a3b36dea88b6 100644
@@ -73,10 +73,9 @@ patternProperties:
               timings
 
           nvidia,emc-auto-cal-interval:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               pad calibration interval in microseconds
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 2097151
 
@@ -136,11 +135,10 @@ patternProperties:
               value of the EMC_XM2DQSPADCTRL2 register for this set of timings
 
           nvidia,emc-zcal-cnt-long:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               number of EMC clocks to wait before issuing any commands after
               clock change
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 1023
 
@@ -150,12 +148,11 @@ patternProperties:
               value of the EMC_ZCAL_INTERVAL register for this set of timings
 
           nvidia,emc-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers (see
               section "15.6.2 EMC Registers" in the TRM) whose values need to
               be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             items:
               - description: EMC_RC
               - description: EMC_RFC
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +1 -2
index 22a94b6fdbde..30d9fb193d7f 100644
@@ -60,8 +60,7 @@ patternProperties:
             maximum: 1066000000
 
           nvidia,emem-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "15.6.1 MC Registers" in the TRM.
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +3 -6
index e4135bac6957..112bae2fcbbd 100644
@@ -56,10 +56,9 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emc-auto-cal-interval:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Pad calibration interval in microseconds.
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 2097151
 
@@ -79,11 +78,10 @@ patternProperties:
               Mode Register 0.
 
           nvidia,emc-zcal-cnt-long:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Number of EMC clocks to wait before issuing any commands after
               sending ZCAL_MRW_CMD.
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 1023
 
@@ -98,12 +96,11 @@ patternProperties:
               FBIO "read" FIFO periodic resetting enabled.
 
           nvidia,emc-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers
               (see section "18.13.2 EMC Registers" in the TRM) whose values
               need to be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             items:
               - description: EMC_RC
               - description: EMC_RFC
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +1 -2
index 4b9196c83291..84fd57bcf0dc 100644
@@ -77,8 +77,7 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emem-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "18.13.1 MC Registers" in the TRM.
Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +10 -10
index 39afacc447b2..f591332fc462 100644
@@ -31,19 +31,19 @@ properties:
     description: A touchscreen is attached to the controller
 
   allwinner,tp-sensitive-adjust:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 15
-        default: 15
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 15
+
     description: Sensitivity of pen down detection
 
   allwinner,filter-type:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 3
-        default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
     description: |
       Select median and averaging filter. Sample used for median /
       averaging filter:
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +16 -17
index 4acda7ce3b44..f212fc6e1661 100644
@@ -67,23 +67,22 @@ properties:
         description:
           One or two <index level filter> to describe break input
           configurations.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          - items:
-              items:
-                - description: |
-                    "index" indicates on which break input (0 or 1) the
-                    configuration should be applied.
-                  enum: [ 0 , 1]
-                - description: |
-                    "level" gives the active level (0=low or 1=high) of the
-                    input signal for this configuration
-                  enum: [ 0, 1 ]
-                - description: |
-                    "filter" gives the filtering value (up to 15) to be applied.
-                  maximum: 15
-            minItems: 1
-            maxItems: 2
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "index" indicates on which break input (0 or 1) the
+                configuration should be applied.
+              enum: [0, 1]
+            - description: |
+                "level" gives the active level (0=low or 1=high) of the
+                input signal for this configuration
+              enum: [0, 1]
+            - description: |
+                "filter" gives the filtering value (up to 15) to be applied.
+              maximum: 15
+        minItems: 1
+        maxItems: 2
 
     required:
       - "#pwm-cells"
Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +3 -6
index d9ad9260e348..a10dceae9bc5 100644
@@ -29,8 +29,7 @@ properties:
   onkey:
     type: object
 
-    allOf:
-      - $ref: ../input/input.yaml
+    $ref: ../input/input.yaml
 
     properties:
       compatible:
@@ -68,8 +67,7 @@ properties:
   watchdog:
     type: object
 
-    allOf:
-      - $ref: ../watchdog/watchdog.yaml
+    $ref: ../watchdog/watchdog.yaml
 
     properties:
       compatible:
@@ -190,8 +188,7 @@ properties:
         description: STPMIC1 voltage regulators supplies
 
       "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
-        allOf:
-          - $ref: ../regulator/regulator.yaml
+        $ref: ../regulator/regulator.yaml
 
       "^ldo[1-2,5-6]$":
         type: object
Documentation/devicetree/bindings/mfd/syscon.yaml +2 -3
index 7a39486b215a..19bdaf781853 100644
@@ -52,9 +52,8 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 2, 4, 8 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
 
   hwlocks:
     maxItems: 1
Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +2 -2
index 200de9396036..987b287f3bff 100644
@@ -41,8 +41,8 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    allOf:
-        - $ref: mmc-controller.yaml
+    $ref: mmc-controller.yaml
+
     properties:
       compatible:
         enum:
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +33 -44

124 lines not on this page · raw message

Documentation/devicetree/bindings/mmc/mmc-controller.yaml +16 -21
index acc9f10871d4..4931fab34d81 100644
@@ -76,20 +76,18 @@ properties:
   # Other properties
 
   bus-width:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4, 8]
-        default: 1
     description:
       Number of data lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4, 8]
+    default: 1
 
   max-frequency:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 400000
-      - maximum: 200000000
     description:
       Maximum operating frequency of the bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 400000
+    maximum: 200000000
 
   disable-wp:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -212,13 +210,12 @@ properties:
       eMMC HS400 enhanced strobe mode is supported
 
   dsr:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 0xffff
     description:
       Value the card Driver Stage Register (DSR) should be programmed
       with.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xffff
 
   no-sdio:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -238,25 +235,23 @@ properties:
       initialization.
 
   fixed-emmc-driver-type:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 4
     description:
       For non-removable eMMC, enforce this driver type. The value is
       the driver type as specified in the eMMC specification (table
       206 in spec version 5.1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4
 
   post-power-on-delay-ms:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 10
     description:
       It was invented for MMC pwrseq-simple which could be referred to
       mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
       waiting for I/O signalling and card power supply to be stable,
       regardless of whether pwrseq-simple is used. Default to 10ms if
       no available.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 10
 
   supports-cqe:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -333,8 +328,8 @@ patternProperties:
       - reg
 
   "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
     minItems: 2
     maxItems: 2
     items:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +2 -4
index 4ee3ed6efab4..42d44cbf962f 100644
@@ -76,8 +76,7 @@ properties:
       high speed modes.
 
   rockchip,default-sample-phase:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 360
     default: 0
@@ -87,8 +86,7 @@ properties:
       If not specified 0 deg will be used.
 
   rockchip,desired-num-phases:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 360
     default: 360
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +5 -9
index 890d47a87ac5..85bd528e9a14 100644
@@ -27,39 +27,35 @@ properties:
       clock to this at probe time.
 
   fifo-depth:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The maximum size of the tx/rx fifo's. If this property is not
       specified, the default value of the fifo size is determined from the
       controller registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   card-detect-delay:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
     description:
       Delay in milli-seconds before detecting card after card
       insert event. The default value is 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   data-addr:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Override fifo address with value provided by DT. The default FIFO reg
       offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
       by driver. If the controller does not follow this rule, please use
       this property to set fifo address in device tree.
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   fifo-watermark-aligned:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/flag
     description:
       Data done irq is expected if data length is less than
       watermark in PIO mode. But fifo watermark is requested to be aligned
       with data length in some SoC so that TX/RX irq can be generated with
       data done irq. Add this watermark quirk to mark this requirement and
       force fifo watermark setting accordingly.
+    $ref: /schemas/types.yaml#/definitions/flag
 
   dmas:
     maxItems: 1
Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +6 -7
index 5d3fa412aabd..c033ac3f147d 100644
@@ -75,13 +75,12 @@ patternProperties:
       allwinner,rb:
         description:
           Contains the native Ready/Busy IDs.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 2
-            items:
-              minimum: 0
-              maximum: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
 
     additionalProperties: false
 
Documentation/devicetree/bindings/mtd/nand-controller.yaml +11 -16
index d261b7096c69..cde7c4d79efe 100644
@@ -47,29 +47,26 @@ patternProperties:
           Contains the native Ready/Busy IDs.
 
       nand-ecc-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
         description:
           Desired ECC engine, either hardware (most of the time
           embedded in the NAND controller) or software correction
           (Linux will handle the calculations). soft_bch is deprecated
           and should be replaced by soft and nand-ecc-algo.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
       nand-ecc-algo:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ hamming, bch, rs ]
         description:
           Desired ECC algorithm.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [hamming, bch, rs]
 
       nand-bus-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 8, 16 ]
-          - default: 8
         description:
           Bus width to the NAND chip
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [8, 16]
+        default: 8
 
       nand-on-flash-bbt:
         $ref: /schemas/types.yaml#/definitions/flag
@@ -83,18 +80,16 @@ patternProperties:
           build a volatile BBT in RAM.
 
       nand-ecc-strength:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
         description:
           Maximum number of bits that can be corrected per ECC step.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
 
       nand-ecc-step-size:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
         description:
           Number of data bytes covered by a single ECC step.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
 
       nand-ecc-maximize:
         $ref: /schemas/types.yaml#/definitions/flag
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +29 -30

65 lines not on this page · raw message

Documentation/devicetree/bindings/net/ethernet-controller.yaml +15 -19
index ac471b60ed6a..1c4474036d46 100644
@@ -14,25 +14,23 @@ properties:
     pattern: "^ethernet(@.*)?$"
 
   local-mac-address:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-      - items:
-          - minItems: 6
-            maxItems: 6
     description:
       Specifies the MAC address that was assigned to the network device.
+    $ref: /schemas/types.yaml#definitions/uint8-array
+    items:
+      - minItems: 6
+        maxItems: 6
 
   mac-address:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-      - items:
-          - minItems: 6
-            maxItems: 6
     description:
       Specifies the MAC address that was last used by the boot
       program; should be used in cases where the MAC address assigned
       to the device by the boot program is different from the
       local-mac-address property.
+    $ref: /schemas/types.yaml#definitions/uint8-array
+    items:
+      - minItems: 6
+        maxItems: 6
 
   max-frame-size:
     $ref: /schemas/types.yaml#definitions/uint32
@@ -133,15 +131,14 @@ properties:
       is used for components that can have configurable fifo sizes.
 
   managed:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
-      - default: auto
-        enum:
-          - auto
-          - in-band-status
     description:
       Specifies the PHY management type. If auto is set and fixed-link
       is not specified, it uses MDIO for management.
+    $ref: /schemas/types.yaml#definitions/string
+    default: auto
+    enum:
+      - auto
+      - in-band-status
 
   fixed-link:
     allOf:
@@ -183,11 +180,10 @@ properties:
         then:
           properties:
             speed:
-              allOf:
-                - $ref: /schemas/types.yaml#definitions/uint32
-                - enum: [10, 100, 1000]
               description:
                 Link speed.
+              $ref: /schemas/types.yaml#definitions/uint32
+              enum: [10, 100, 1000]
 
             full-duplex:
               $ref: /schemas/types.yaml#definitions/flag
Documentation/devicetree/bindings/net/qca,ar803x.yaml +6 -11
index 5a6c9d20c0ba..1788884b8c28 100644
@@ -20,15 +20,13 @@ allOf:
 properties:
   qca,clk-out-frequency:
     description: Clock output frequency in Hertz.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 25000000, 50000000, 62500000, 125000000 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [25000000, 50000000, 62500000, 125000000]
 
   qca,clk-out-strength:
     description: Clock output driver strength.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
 
   qca,keep-pll-enabled:
     description: |
@@ -52,17 +50,14 @@ properties:
     type: object
     description:
       Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
-    allOf:
-      - $ref: /schemas/regulator/regulator.yaml
+    $ref: /schemas/regulator/regulator.yaml
 
   vddh-regulator:
     type: object
     description:
       Dummy subnode to model the external connection of the PHY VDDH
       regulator to VDDIO.
-    allOf:
-      - $ref: /schemas/regulator/regulator.yaml
-
+    $ref: /schemas/regulator/regulator.yaml
 
 examples:
   - |
Documentation/devicetree/bindings/net/snps,dwmac.yaml +9 -13
index e08cd4c4d568..3c825c74d596 100644
@@ -199,14 +199,13 @@ properties:
 
   snps,reset-delays-us:
     deprecated: true
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-array
-      - minItems: 3
-        maxItems: 3
     description:
       Triplet of delays. The 1st cell is reset pre-delay in micro
       seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
       cell is reset post-delay in micro seconds.
+    $ref: /schemas/types.yaml#definitions/uint32-array
+    minItems: 3
+    maxItems: 3
 
   snps,aal:
     $ref: /schemas/types.yaml#definitions/flag
@@ -301,27 +300,24 @@ allOf:
     then:
       properties:
         snps,pbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Programmable Burst Length (tx and rx)
+          $ref: /schemas/types.yaml#definitions/uint32
+          enum: [2, 4, 8]
 
         snps,txpbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Tx Programmable Burst Length. If set, DMA tx will use this
             value rather than snps,pbl.
+          $ref: /schemas/types.yaml#definitions/uint32
+          enum: [2, 4, 8]
 
         snps,rxpbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Rx Programmable Burst Length. If set, DMA rx will use this
             value rather than snps,pbl.
+          $ref: /schemas/types.yaml#definitions/uint32
+          enum: [2, 4, 8]
 
         snps,no-pbl-x8:
           $ref: /schemas/types.yaml#definitions/flag
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +1 -2
index 8fc8d3be303b..1dd5a9bd9db7 100644
@@ -150,10 +150,9 @@ properties:
 patternProperties:
   "^mdio@":
     type: object
-    allOf:
-      - $ref: "ti,davinci-mdio.yaml#"
     description:
       CPSW MDIO bus.
+    $ref: "ti,davinci-mdio.yaml#"
 
 
 required:
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +3 -4
index 2ea14ab29254..d454c1fab930 100644
@@ -40,10 +40,9 @@ properties:
   ti,hwmods:
     description: TI hwmod name
     deprecated: true
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - items:
-          const: davinci_mdio
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      const: davinci_mdio
 
 if:
   properties:
Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +3 -4
index 48a98dae00de..64b2c64ca806 100644
@@ -71,10 +71,9 @@ properties:
 
   max-link-speed:
     description: Specify PCI Gen for link capability.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 2, 3, 4 ]
-      - default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 1
 
   bus-range:
     description: Range of bus numbers associated with this controller.
Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +5 -7
index bfefd09d8c1e..7556be6e2754 100644
@@ -84,13 +84,12 @@ properties:
   gpio-line-names: true
 
   input-debounce:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 5
     description:
       Debouncing periods in microseconds, one period per interrupt
       bank found in the controller
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 5
 
 patternProperties:
   # It's pretty scary, but the basic idea is that:
@@ -115,9 +114,8 @@ patternProperties:
       bias-pull-down: true
 
       drive-strength:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 10, 20, 30, 40 ]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [10, 20, 30, 40]
 
     required:
       - pins
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +17 -20
index 7651a675ab2d..017d9593573b 100644
@@ -33,26 +33,23 @@ patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
-              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
-              DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,
-              GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,
-              I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,
-              LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,
-              NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
-              NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,
-              NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,
-              PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,
-              ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
-              SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
-              SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,
-              SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,
-              TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,
-              USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,
-              VPO12, VPO24, WDTRST1, WDTRST2 ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+            ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+            EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+            GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+            I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+            MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+            NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+            NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+            PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+            RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+            RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+            SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+            SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+            SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+            TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+            VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
 required:
   - compatible
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +21 -24

57 lines not on this page · raw message

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +51 -57

115 lines not on this page · raw message

Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +15 -16
index 6297e78418cf..d474bc1f393b 100644
@@ -37,22 +37,21 @@ patternProperties:
           be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
           integer CONFIG is the pad setting value like pull-up on this pin. Please
           refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          - items:
-              items:
-                - description: |
-                    "mux_reg" indicates the offset of mux register.
-                - description: |
-                    "conf_reg" indicates the offset of pad configuration register.
-                - description: |
-                    "input_reg" indicates the offset of select input register.
-                - description: |
-                    "mux_val" indicates the mux value to be applied.
-                - description: |
-                    "input_val" indicates the select input value to be applied.
-                - description: |
-                    "pad_setting" indicates the pad configuration value to be applied.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
 
     required:
       - fsl,pins
Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +1 -3
index cd2b436350ef..2c0acb405e6c 100644
@@ -24,12 +24,10 @@ properties:
 patternProperties:
   '-pins$':
     type: object
-    allOf:
-      - $ref: pincfg-node.yaml#
-      - $ref: pinmux-node.yaml#
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
 
     properties:
       function: true
Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +1 -2
index 732d9075560b..ef8877ddb1eb 100644
@@ -122,11 +122,10 @@ properties:
       this, "pins" or "pinmux" has to be specified)
 
   pinmux:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
     description:
       The list of numeric pin ids and their mux settings that properties in the
       node apply to (either this, "pins" or "groups" have to be specified)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   pinctrl-pin-array:
     $ref: /schemas/types.yaml#/definitions/uint32-array
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +25 -31

96 lines not on this page · raw message

Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +1 -2
index 6c6079fe1351..49fd3feabba5 100644
@@ -56,8 +56,7 @@ properties:
 
   amlogic,ao-sysctrl:
     description: phandle to the AO sysctrl node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
   - compatible
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +5 -6
index 4fe64f4dd594..fc799b0577d4 100644
@@ -78,12 +78,11 @@ properties:
       A list of PWM channels used as PWM outputs on particular platform.
       It is an array of up to 5 elements being indices of PWM channels
       (from 0 to 4), the order does not matter.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - uniqueItems: true
-      - items:
-          minimum: 0
-          maximum: 4
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    uniqueItems: true
+    items:
+      minimum: 0
+      maximum: 4
 
 required:
   - clocks
Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +16 -19
index 9d3b28417fb6..605590384b48 100644
@@ -46,24 +46,22 @@ properties:
         0: LOW
         1: HIGH
       Default is LOW if nothing else is specified.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - maxItems: 8
-        items:
-          enum: [ 0, 1 ]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 8
+    items:
+      enum: [0, 1]
+      default: 0
 
   states:
     description: Selection of available voltages/currents provided by this
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-      - maxItems: 8
-        items:
-          items:
-            - description: Voltage in microvolts
-            - description: GPIO group state value
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 8
+    items:
+      items:
+        - description: Voltage in microvolts
+        - description: GPIO group state value
 
   startup-delay-us:
     description: startup time in microseconds
@@ -81,12 +79,11 @@ properties:
 
   regulator-type:
     description: Specifies what is being regulated.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
-      - enum:
-          - voltage
-          - current
-        default: voltage
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - voltage
+      - current
+    default: voltage
 
 required:
   - compatible
Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +14 -17
index a682af0dc67e..e5422eaf851d 100644
@@ -21,17 +21,17 @@ properties:
 
   regulators:
     type: object
-    allOf:
-      - $ref: regulator.yaml#
+    $ref: regulator.yaml#
+
     description: |
       list of regulators provided by this controller, must be named
       after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
 
     properties:
       mps,switch-freq:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint8"
-        enum: [ 0, 1, 2, 3 ]
+        $ref: "/schemas/types.yaml#/definitions/uint8"
+
+        enum: [0, 1, 2, 3]
         default: 2
         description: |
           switching frequency must be one of following corresponding value
@@ -40,32 +40,29 @@ properties:
     patternProperties:
       "^ldo[1-4]$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
       "^ldortc$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
       "^buck[1-4]$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
         properties:
           mps,buck-softstart:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint8"
-            enum: [ 0, 1, 2, 3 ]
+            $ref: "/schemas/types.yaml#/definitions/uint8"
+
+            enum: [0, 1, 2, 3]
             description: |
               defines the soft start time of this buck, must be one of the following
               corresponding values 150us, 300us, 610us, 920us
 
           mps,buck-phase-delay:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint8"
-            enum: [ 0, 1, 2, 3 ]
+            $ref: "/schemas/types.yaml#/definitions/uint8"
+
+            enum: [0, 1, 2, 3]
             description: |
               defines the phase delay of this buck, must be one of the following
               corresponding values 0deg, 90deg, 180deg, 270deg
Documentation/devicetree/bindings/regulator/regulator.yaml +2 -3
index 91a39a33000b..ec505dbbf87c 100644
@@ -123,9 +123,8 @@ properties:
       0: Disable active discharge.
       1: Enable active discharge.
       Absence of this property will leave configuration to default.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - enum: [ 0, 1 ]
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [0, 1]
 
   regulator-coupled-with:
     description: Regulators with which the regulator is coupled. The linkage
Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +14 -20
index 71ce032b8cf8..ac74e214b050 100644
@@ -24,10 +24,9 @@ description: |
 patternProperties:
   "^LDO[1-7]$":
     type: object
-    allOf:
-      - $ref: regulator.yaml#
     description:
       Properties for single LDO regulator.
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -37,10 +36,9 @@ patternProperties:
 
   "^BUCK[1-7]$":
     type: object
-    allOf:
-      - $ref: regulator.yaml#
     description:
       Properties for single BUCK regulator.
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -49,40 +47,36 @@ patternProperties:
           should be "buck1", ..., "buck7"
 
       rohm,dvs-run-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "RUN" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-idle-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "IDLE" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-suspend-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "SUSPEND" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-lpsr-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "LPSR" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
         # Supported default DVS states:
         #     buck       |    run     |   idle    | suspend  | lpsr
Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +1 -2
index 64f1183ce841..cb336b2c16af 100644
@@ -23,8 +23,7 @@ properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: phandle to system configuration controller.
 
   vdda-supply:
Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +1 -2
index 8d8f38fe85dc..e6322bc3e447 100644
@@ -26,8 +26,7 @@ patternProperties:
   "^(reg11|reg18|usb33)$":
     type: object
 
-    allOf:
-      - $ref: "regulator.yaml#"
+    $ref: "regulator.yaml#"
 
 required:
   - compatible
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +3 -6
index 4ff4d3df0a06..4ffa25268fcc 100644
@@ -28,22 +28,20 @@ properties:
     maxItems: 1
 
   st,syscfg-holdboot:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: remote processor reset hold boot
       - Phandle of syscon block.
       - The offset of the hold boot setting register.
       - The field mask of the hold boot.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     maxItems: 1
 
   st,syscfg-tz:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description:
       Reference to the system configuration which holds the RCC trust zone mode
       - Phandle of syscon block.
       - The offset of the RCC trust zone mode register.
       - The field mask of the RCC trust zone mode.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     maxItems: 1
 
   interrupts:
@@ -90,8 +88,7 @@ properties:
       (see ../reserved-memory/reserved-memory.txt)
 
   st,syscfg-pdds:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the system configuration which holds the remote
         1st cell: phandle to syscon block
Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +1 -2
index 8ac437282659..6b2d56cc3f38 100644
@@ -21,8 +21,7 @@ properties:
 
   intel,global-reset:
     description: Global reset register offset and bit offset.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       - description: Register offset
       - description: Register bit offset
Documentation/devicetree/bindings/riscv/cpus.yaml +9 -11
index 04819ad379c2..f80ba2c66f71 100644
@@ -40,24 +40,18 @@ properties:
       and identifies the type of the hart.
 
   mmu-type:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/string"
-      - enum:
-          - riscv,sv32
-          - riscv,sv39
-          - riscv,sv48
     description:
       Identifies the MMU address translation mode used on this
       hart.  These values originate from the RISC-V Privileged
       Specification document, available from
       https://riscv.org/specifications/
+    $ref: "/schemas/types.yaml#/definitions/string"
+    enum:
+      - riscv,sv32
+      - riscv,sv39
+      - riscv,sv48
 
   riscv,isa:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/string"
-      - enum:
-          - rv64imac
-          - rv64imafdc
     description:
       Identifies the specific RISC-V instruction set architecture
       supported by the hart.  These are documented in the RISC-V
@@ -67,6 +61,10 @@ properties:
       While the isa strings in ISA specification are case
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
+    $ref: "/schemas/types.yaml#/definitions/string"
+    enum:
+      - rv64imac
+      - rv64imafdc
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +4 -5
index 57b087574aa1..5456604b1c14 100644
@@ -32,11 +32,10 @@ properties:
     maxItems: 1
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-      - items:
-          minItems: 3
-          maxItems: 3
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      minItems: 3
+      maxItems: 3
     description: |
       Phandle/offset/mask triplet. The phandle to pwrcfg used to
       access control register at offset, and change the dbp (Disable Backup
Documentation/devicetree/bindings/serial/pl011.yaml +4 -6
index 1a64d59152aa..c23c93b400f0 100644
@@ -88,17 +88,15 @@ properties:
     description:
       Rate at which poll occurs when auto-poll is set.
       default 100ms.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 100
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
 
   poll-timeout-ms:
     description:
       Poll timeout when auto-poll is set, default
       3000ms.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 3000
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3000
 
 required:
   - compatible
Documentation/devicetree/bindings/serial/rs485.yaml +12 -14
index 2b8261ea6d9c..8141e4aad530 100644
@@ -16,20 +16,18 @@ maintainers:
 properties:
   rs485-rts-delay:
     description: prop-encoded-array <a b>
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          items:
-            - description:
-                Delay between rts signal and beginning of data sent in milliseconds.
-                It corresponds to the delay before sending data.
-              default: 0
-              maximum: 1000
-            - description:
-                Delay between end of data sent and rts signal in milliseconds.
-                It corresponds to the delay after sending data and actual release of the line.
-              default: 0
-              maximum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      items:
+        - description: Delay between rts signal and beginning of data sent in
+            milliseconds. It corresponds to the delay before sending data.
+          default: 0
+          maximum: 1000
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/serial/samsung_uart.yaml +2 -3
index 9d2ce347875b..ff2f49fe322c 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/sound/adi,adau7118.yaml +9 -11
index 76ee695097bf..fb78967ee17b 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +20 -21

41 lines not on this page · raw message

Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +1 -2
index a495d5fc0d23..e8f716b5f875 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +19 -23

42 lines not on this page · raw message

Documentation/devicetree/bindings/spi/spi-controller.yaml +6 -8
index d8e5509a7081..c6a2f543648b 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/spi/spi-pl022.yaml +24 -31

55 lines not on this page · raw message

Documentation/devicetree/bindings/spi/spi-sifive.yaml +6 -8
index 140e4351a19f..28040598bfae 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +3 -4
index 2ddd39d96766..d7be931b42d2 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +3 -4
index 6ff718ede184..d83a1f97f911 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

--
2.20.1

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Part of the diff is not shown here. View the raw message.

Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

Quoted 11 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

For allwinner,

Maxime

#3 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 9 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

This is a large change.

Was this done manually or by some script?
If it was done manually, how likely is it there are defects in the conversion?

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

author maintainer
#4 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

Quoted 9 lines · Joe Perches
Quoted 7 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

Quoted 6 lines
Quoted 2 lines

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

This is a large change.

Was this done manually or by some script?

Scripted with python ruamel yaml, but then I had to filter out all the re-formatting (hence the first patch to cut down some of that).

Quoted 2 lines

If it was done manually, how likely is it there are defects in the conversion?

Either way, the schemas still have to pass the meta-schema checks.

Rob

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Acked-by on v1 2/2
#5 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 54 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

---
 .../devicetree/bindings/arm/cpus.yaml         |  81 +++---
 .../devicetree/bindings/arm/l2c2x0.yaml       |  87 +++---
 .../devicetree/bindings/arm/psci.yaml         |  15 +-
 .../bindings/arm/samsung/exynos-chipid.yaml   |   5 +-
 .../bus/allwinner,sun50i-a64-de2.yaml         |   5 +-
 .../bindings/clock/fixed-factor-clock.yaml    |   5 +-
 .../bindings/connector/usb-connector.yaml     |  28 +-
 .../bindings/crypto/st,stm32-hash.yaml        |   9 +-
 .../allwinner,sun4i-a10-display-engine.yaml   |   7 +-
 .../display/allwinner,sun4i-a10-tcon.yaml     |   5 +-
 .../bindings/display/panel/panel-common.yaml  |   5 +-
 .../devicetree/bindings/dma/dma-common.yaml   |   3 +-
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  18 +-
 .../devicetree/bindings/eeprom/at24.yaml      |  11 +-
 .../devicetree/bindings/example-schema.yaml   |  17 +-
 .../bindings/hwmon/adi,ltc2947.yaml           |  32 +--
 .../devicetree/bindings/hwmon/ti,tmp513.yaml  |  21 +-
 .../devicetree/bindings/i2c/st,stm32-i2c.yaml |   9 +-
 .../bindings/iio/adc/adi,ad7124.yaml          |   5 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |   3 +-
 .../bindings/iio/adc/microchip,mcp3911.yaml   |   7 +-
 .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml  |  31 +-
 .../bindings/iio/light/tsl2772.yaml           |  13 +-
 .../bindings/iio/temperature/adi,ltc2983.yaml |  56 ++--
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |   5 +-
 .../devicetree/bindings/input/input.yaml      |   9 +-
 .../interrupt-controller/arm,gic-v3.yaml      |  39 ++-
 .../devicetree/bindings/iommu/arm,smmu.yaml   |   3 +-
 .../devicetree/bindings/leds/common.yaml      |  13 +-
 .../devicetree/bindings/leds/leds-gpio.yaml   |   3 +-
 .../bindings/leds/rohm,bd71828-leds.yaml      |  10 +-
 .../bindings/mailbox/st,stm32-ipcc.yaml       |   5 +-
 .../bindings/media/amlogic,gx-vdec.yaml       |   6 +-
 .../media/amlogic,meson-gx-ao-cec.yaml        |   3 +-
 .../devicetree/bindings/media/rc.yaml         | 265 +++++++++---------
 .../bindings/media/renesas,vin.yaml           |   7 +-
 .../memory-controllers/exynos-srom.yaml       |  14 +-
 .../nvidia,tegra124-emc.yaml                  |   9 +-
 .../nvidia,tegra124-mc.yaml                   |   3 +-
 .../nvidia,tegra30-emc.yaml                   |   9 +-
 .../memory-controllers/nvidia,tegra30-mc.yaml |   3 +-
Quoted 4 lines
 .../bindings/mfd/allwinner,sun4i-a10-ts.yaml  |  20 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  33 ++-
 .../devicetree/bindings/mfd/st,stpmic1.yaml   |   9 +-
 .../devicetree/bindings/mfd/syscon.yaml       |   5 +-
Quoted 47 lines
 .../devicetree/bindings/mmc/aspeed,sdhci.yaml |   4 +-
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  77 +++--
 .../bindings/mmc/mmc-controller.yaml          |  37 ++-
 .../bindings/mmc/rockchip-dw-mshc.yaml        |   6 +-
 .../bindings/mmc/synopsys-dw-mshc-common.yaml |  14 +-
 .../mtd/allwinner,sun4i-a10-nand.yaml         |  13 +-
 .../bindings/mtd/nand-controller.yaml         |  27 +-
 .../bindings/net/can/bosch,m_can.yaml         |  59 ++--
 .../bindings/net/ethernet-controller.yaml     |  34 +--
 .../devicetree/bindings/net/qca,ar803x.yaml   |  17 +-
 .../devicetree/bindings/net/snps,dwmac.yaml   |  22 +-
 .../bindings/net/ti,cpsw-switch.yaml          |   3 +-
 .../bindings/net/ti,davinci-mdio.yaml         |   7 +-
 .../bindings/pci/intel-gw-pcie.yaml           |   7 +-
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  12 +-
 .../pinctrl/aspeed,ast2400-pinctrl.yaml       |  37 ++-
 .../pinctrl/aspeed,ast2500-pinctrl.yaml       |  45 ++-
 .../pinctrl/aspeed,ast2600-pinctrl.yaml       | 108 ++++---
 .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml  |  31 +-
 .../bindings/pinctrl/intel,lgm-io.yaml        |   4 +-
 .../bindings/pinctrl/pinmux-node.yaml         |   3 +-
 .../bindings/pinctrl/st,stm32-pinctrl.yaml    |  56 ++--
 .../bindings/power/amlogic,meson-ee-pwrc.yaml |   3 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  |  11 +-
 .../bindings/regulator/gpio-regulator.yaml    |  35 ++-
 .../bindings/regulator/mps,mpq7920.yaml       |  31 +-
 .../bindings/regulator/regulator.yaml         |   5 +-
 .../regulator/rohm,bd71828-regulator.yaml     |  34 +--
 .../bindings/regulator/st,stm32-booster.yaml  |   3 +-
 .../regulator/st,stm32mp1-pwr-reg.yaml        |   3 +-
 .../bindings/remoteproc/st,stm32-rproc.yaml   |   9 +-
 .../bindings/reset/intel,rcu-gw.yaml          |   3 +-
 .../devicetree/bindings/riscv/cpus.yaml       |  20 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml |   9 +-
 .../devicetree/bindings/serial/pl011.yaml     |  10 +-
 .../devicetree/bindings/serial/rs485.yaml     |  26 +-
 .../bindings/serial/samsung_uart.yaml         |   5 +-
 .../bindings/sound/adi,adau7118.yaml          |  20 +-
 .../sound/allwinner,sun4i-a10-codec.yaml      |  41 ++-
 .../bindings/sound/qcom,wcd934x.yaml          |   3 +-
 .../bindings/spi/renesas,sh-msiof.yaml        |  42 ++-
 .../bindings/spi/spi-controller.yaml          |  14 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  55 ++--
 .../devicetree/bindings/spi/spi-sifive.yaml   |  14 +-
 .../bindings/thermal/qcom-tsens.yaml          |   7 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |   7 +-
 91 files changed, 881 insertions(+), 1103 deletions(-)
Signature · 8 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Acked-by on v1 2/2
#6 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 11 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

Reviewed-by on v1 2/2
#7 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 11 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

Thanks for fixing this!
Linus Walleij

maintainer Acked-by on v1 2/2
#8 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 11 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

Quoted 14 lines
---
 .../devicetree/bindings/arm/cpus.yaml         |  81 +++---
 .../devicetree/bindings/arm/l2c2x0.yaml       |  87 +++---
 .../devicetree/bindings/arm/psci.yaml         |  15 +-
 .../bindings/arm/samsung/exynos-chipid.yaml   |   5 +-
 .../bus/allwinner,sun50i-a64-de2.yaml         |   5 +-
 .../bindings/clock/fixed-factor-clock.yaml    |   5 +-
 .../bindings/connector/usb-connector.yaml     |  28 +-
 .../bindings/crypto/st,stm32-hash.yaml        |   9 +-
 .../allwinner,sun4i-a10-display-engine.yaml   |   7 +-
 .../display/allwinner,sun4i-a10-tcon.yaml     |   5 +-
 .../bindings/display/panel/panel-common.yaml  |   5 +-
 .../devicetree/bindings/dma/dma-common.yaml   |   3 +-
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  18 +-
Signature · 5 lines
~Vinod

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
maintainer Acked-by on v1 2/2
#9 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 3 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

maintainer Acked-by on v1 2/2
#10 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 11 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

Quoted 3,947 lines
---
 .../devicetree/bindings/arm/cpus.yaml         |  81 +++---
 .../devicetree/bindings/arm/l2c2x0.yaml       |  87 +++---
 .../devicetree/bindings/arm/psci.yaml         |  15 +-
 .../bindings/arm/samsung/exynos-chipid.yaml   |   5 +-
 .../bus/allwinner,sun50i-a64-de2.yaml         |   5 +-
 .../bindings/clock/fixed-factor-clock.yaml    |   5 +-
 .../bindings/connector/usb-connector.yaml     |  28 +-
 .../bindings/crypto/st,stm32-hash.yaml        |   9 +-
 .../allwinner,sun4i-a10-display-engine.yaml   |   7 +-
 .../display/allwinner,sun4i-a10-tcon.yaml     |   5 +-
 .../bindings/display/panel/panel-common.yaml  |   5 +-
 .../devicetree/bindings/dma/dma-common.yaml   |   3 +-
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  18 +-
 .../devicetree/bindings/eeprom/at24.yaml      |  11 +-
 .../devicetree/bindings/example-schema.yaml   |  17 +-
 .../bindings/hwmon/adi,ltc2947.yaml           |  32 +--
 .../devicetree/bindings/hwmon/ti,tmp513.yaml  |  21 +-
 .../devicetree/bindings/i2c/st,stm32-i2c.yaml |   9 +-
 .../bindings/iio/adc/adi,ad7124.yaml          |   5 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |   3 +-
 .../bindings/iio/adc/microchip,mcp3911.yaml   |   7 +-
 .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml  |  31 +-
 .../bindings/iio/light/tsl2772.yaml           |  13 +-
 .../bindings/iio/temperature/adi,ltc2983.yaml |  56 ++--
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |   5 +-
 .../devicetree/bindings/input/input.yaml      |   9 +-
 .../interrupt-controller/arm,gic-v3.yaml      |  39 ++-
 .../devicetree/bindings/iommu/arm,smmu.yaml   |   3 +-
 .../devicetree/bindings/leds/common.yaml      |  13 +-
 .../devicetree/bindings/leds/leds-gpio.yaml   |   3 +-
 .../bindings/leds/rohm,bd71828-leds.yaml      |  10 +-
 .../bindings/mailbox/st,stm32-ipcc.yaml       |   5 +-
 .../bindings/media/amlogic,gx-vdec.yaml       |   6 +-
 .../media/amlogic,meson-gx-ao-cec.yaml        |   3 +-
 .../devicetree/bindings/media/rc.yaml         | 265 +++++++++---------
 .../bindings/media/renesas,vin.yaml           |   7 +-
 .../memory-controllers/exynos-srom.yaml       |  14 +-
 .../nvidia,tegra124-emc.yaml                  |   9 +-
 .../nvidia,tegra124-mc.yaml                   |   3 +-
 .../nvidia,tegra30-emc.yaml                   |   9 +-
 .../memory-controllers/nvidia,tegra30-mc.yaml |   3 +-
 .../bindings/mfd/allwinner,sun4i-a10-ts.yaml  |  20 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  33 ++-
 .../devicetree/bindings/mfd/st,stpmic1.yaml   |   9 +-
 .../devicetree/bindings/mfd/syscon.yaml       |   5 +-
 .../devicetree/bindings/mmc/aspeed,sdhci.yaml |   4 +-
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  77 +++--
 .../bindings/mmc/mmc-controller.yaml          |  37 ++-
 .../bindings/mmc/rockchip-dw-mshc.yaml        |   6 +-
 .../bindings/mmc/synopsys-dw-mshc-common.yaml |  14 +-
 .../mtd/allwinner,sun4i-a10-nand.yaml         |  13 +-
 .../bindings/mtd/nand-controller.yaml         |  27 +-
 .../bindings/net/can/bosch,m_can.yaml         |  59 ++--
 .../bindings/net/ethernet-controller.yaml     |  34 +--
 .../devicetree/bindings/net/qca,ar803x.yaml   |  17 +-
 .../devicetree/bindings/net/snps,dwmac.yaml   |  22 +-
 .../bindings/net/ti,cpsw-switch.yaml          |   3 +-
 .../bindings/net/ti,davinci-mdio.yaml         |   7 +-
 .../bindings/pci/intel-gw-pcie.yaml           |   7 +-
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  12 +-
 .../pinctrl/aspeed,ast2400-pinctrl.yaml       |  37 ++-
 .../pinctrl/aspeed,ast2500-pinctrl.yaml       |  45 ++-
 .../pinctrl/aspeed,ast2600-pinctrl.yaml       | 108 ++++---
 .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml  |  31 +-
 .../bindings/pinctrl/intel,lgm-io.yaml        |   4 +-
 .../bindings/pinctrl/pinmux-node.yaml         |   3 +-
 .../bindings/pinctrl/st,stm32-pinctrl.yaml    |  56 ++--
 .../bindings/power/amlogic,meson-ee-pwrc.yaml |   3 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  |  11 +-
 .../bindings/regulator/gpio-regulator.yaml    |  35 ++-
 .../bindings/regulator/mps,mpq7920.yaml       |  31 +-
 .../bindings/regulator/regulator.yaml         |   5 +-
 .../regulator/rohm,bd71828-regulator.yaml     |  34 +--
 .../bindings/regulator/st,stm32-booster.yaml  |   3 +-
 .../regulator/st,stm32mp1-pwr-reg.yaml        |   3 +-
 .../bindings/remoteproc/st,stm32-rproc.yaml   |   9 +-
 .../bindings/reset/intel,rcu-gw.yaml          |   3 +-
 .../devicetree/bindings/riscv/cpus.yaml       |  20 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml |   9 +-
 .../devicetree/bindings/serial/pl011.yaml     |  10 +-
 .../devicetree/bindings/serial/rs485.yaml     |  26 +-
 .../bindings/serial/samsung_uart.yaml         |   5 +-
 .../bindings/sound/adi,adau7118.yaml          |  20 +-
 .../sound/allwinner,sun4i-a10-codec.yaml      |  41 ++-
 .../bindings/sound/qcom,wcd934x.yaml          |   3 +-
 .../bindings/spi/renesas,sh-msiof.yaml        |  42 ++-
 .../bindings/spi/spi-controller.yaml          |  14 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  55 ++--
 .../devicetree/bindings/spi/spi-sifive.yaml   |  14 +-
 .../bindings/thermal/qcom-tsens.yaml          |   7 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |   7 +-
 91 files changed, 881 insertions(+), 1103 deletions(-)
Documentation/devicetree/bindings/arm/cpus.yaml +40 -41
index a01814765ddb..3338bae4cee3 100644
@@ -171,49 +171,48 @@ properties:
       - qcom,scorpion
 
   enable-method:
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/string'
-      - oneOf:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    oneOf:
           # On ARM v8 64-bit this property is required
-          - enum:
-              - psci
-              - spin-table
+      - enum:
+          - psci
+          - spin-table
           # On ARM 32-bit systems this property is optional
-          - enum:
-              - actions,s500-smp
-              - allwinner,sun6i-a31
-              - allwinner,sun8i-a23
-              - allwinner,sun9i-a80-smp
-              - allwinner,sun8i-a83t-smp
-              - amlogic,meson8-smp
-              - amlogic,meson8b-smp
-              - arm,realview-smp
-              - aspeed,ast2600-smp
-              - brcm,bcm11351-cpu-method
-              - brcm,bcm23550
-              - brcm,bcm2836-smp
-              - brcm,bcm63138
-              - brcm,bcm-nsp-smp
-              - brcm,brahma-b15
-              - marvell,armada-375-smp
-              - marvell,armada-380-smp
-              - marvell,armada-390-smp
-              - marvell,armada-xp-smp
-              - marvell,98dx3236-smp
-              - marvell,mmp3-smp
-              - mediatek,mt6589-smp
-              - mediatek,mt81xx-tz-smp
-              - qcom,gcc-msm8660
-              - qcom,kpss-acc-v1
-              - qcom,kpss-acc-v2
-              - renesas,apmu
-              - renesas,r9a06g032-smp
-              - rockchip,rk3036-smp
-              - rockchip,rk3066-smp
-              - socionext,milbeaut-m10v-smp
-              - ste,dbx500-smp
-              - ti,am3352
-              - ti,am4372
+      - enum:
+          - actions,s500-smp
+          - allwinner,sun6i-a31
+          - allwinner,sun8i-a23
+          - allwinner,sun9i-a80-smp
+          - allwinner,sun8i-a83t-smp
+          - amlogic,meson8-smp
+          - amlogic,meson8b-smp
+          - arm,realview-smp
+          - aspeed,ast2600-smp
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm2836-smp
+          - brcm,bcm63138
+          - brcm,bcm-nsp-smp
+          - brcm,brahma-b15
+          - marvell,armada-375-smp
+          - marvell,armada-380-smp
+          - marvell,armada-390-smp
+          - marvell,armada-xp-smp
+          - marvell,98dx3236-smp
+          - marvell,mmp3-smp
+          - mediatek,mt6589-smp
+          - mediatek,mt81xx-tz-smp
+          - qcom,gcc-msm8660
+          - qcom,kpss-acc-v1
+          - qcom,kpss-acc-v2
+          - renesas,apmu
+          - renesas,r9a06g032-smp
+          - rockchip,rk3036-smp
+          - rockchip,rk3066-smp
+          - socionext,milbeaut-m10v-smp
+          - ste,dbx500-smp
+          - ti,am3352
+          - ti,am4372
 
   cpu-release-addr:
     $ref: '/schemas/types.yaml#/definitions/uint64'
Documentation/devicetree/bindings/arm/l2c2x0.yaml +37 -50
index 5d1d50eea26e..6b8f4d4fa580 100644
@@ -70,43 +70,39 @@ properties:
     description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
       read, write and setup latencies. Minimum valid values are 1. Controllers
       without setup latency control should use a value of 0.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 3
-        items:
-          minimum: 0
-          maximum: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
 
   arm,tag-latency:
     description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
       read, write and setup latencies. Controllers without setup latency control
       should use 0. Controllers without separate read and write Tag RAM latency
       values should only use the first cell.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 3
-        items:
-          minimum: 0
-          maximum: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
 
   arm,dirty-latency:
     description: Cycles of latency for Dirty RAMs. This is a single cell.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
-        maximum: 8
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
 
   arm,filter-ranges:
     description: <start length> Starting address and length of window to
       filter. Addresses in the filter window are directed to the M1 port. Other
       addresses will go to the M0 port.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 2
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 2
+      maxItems: 2
 
   arm,io-coherent:
     description: indicates that the system is operating in an hardware
@@ -131,36 +127,31 @@ properties:
   arm,double-linefill:
     description: Override double linefill enable setting. Enable if
       non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,double-linefill-incr:
     description: Override double linefill on INCR read. Enable
       if non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,double-linefill-wrap:
     description: Override double linefill on WRAP read. Enable
       if non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,prefetch-drop:
     description: Override prefetch drop enable setting. Enable if non-zero,
       disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,prefetch-offset:
     description: Override prefetch offset value.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
 
   arm,shared-override:
     description: The default behavior of the L220 or PL310 cache
@@ -193,35 +184,31 @@ properties:
     description: |
       Data prefetch. Value: <0> (forcibly disable), <1>
       (forcibly enable), property absent (retain settings set by firmware)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   prefetch-instr:
     description: |
       Instruction prefetch. Value: <0> (forcibly disable),
       <1> (forcibly enable), property absent (retain settings set by
       firmware)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,dynamic-clock-gating:
     description: |
       L2 dynamic clock gating. Value: <0> (forcibly
       disable), <1> (forcibly enable), property absent (OS specific behavior,
       preferably retain firmware settings)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,standby-mode:
     description: L2 standby mode enable. Value <0> (forcibly disable),
       <1> (forcibly enable), property absent (OS specific behavior,
       preferably retain firmware settings)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,early-bresp-disable:
     description: Disable the CA9 optimization Early BRESP (PL310)
Documentation/devicetree/bindings/arm/psci.yaml +7 -8
index 9247b58c26fc..4f9b361aefd6 100644
@@ -69,13 +69,12 @@ properties:
 
   method:
     description: The method of calling the PSCI firmware.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - enum:
-          # SMC #0, with the register assignments specified in this binding.
-          - smc
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+
+      - smc
           # HVC #0, with the register assignments specified in this binding.
-          - hvc
+      - hvc
 
   cpu_suspend:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -107,8 +106,8 @@ properties:
 
 patternProperties:
   "^power-domain-":
-    allOf:
-      - $ref: "../power/power-domain.yaml#"
+    $ref: "../power/power-domain.yaml#"
+
     type: object
     description: |
       ARM systems can have multiple cores, sometimes in an hierarchical
Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2 -3
index 0425d333b50d..f99c0c6df21b 100644
@@ -22,9 +22,8 @@ properties:
       Adaptive Supply Voltage bin selection. This can be used
       to determine the ASV bin of an SoC if respective information
       is missing in the CHIPID registers or in the OTP memory.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
 
 required:
   - compatible
Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +2 -3
index f0b3d30fbb76..0503651cd214 100644
@@ -31,12 +31,11 @@ properties:
     maxItems: 1
 
   allwinner,sram:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/phandle-array
-      - maxItems: 1
     description:
       The SRAM that needs to be claimed to access the display engine
       bus.
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    maxItems: 1
 
   ranges: true
 
Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +2 -3
index b567f8092f8c..f415845b38dd 100644
@@ -24,9 +24,8 @@ properties:
 
   clock-div:
     description: Fixed divider
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
 
   clock-mult:
     description: Fixed multiplier
Documentation/devicetree/bindings/connector/usb-connector.yaml +13 -15
index 369c58e22a06..03b92b6f35fa 100644
@@ -27,8 +27,8 @@ properties:
     description: Size of the connector, should be specified in case of
       non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
       connectors.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - mini
       - micro
@@ -57,8 +57,8 @@ properties:
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - source
       - sink
@@ -66,18 +66,18 @@ properties:
 
   try-power-role:
     description: Preferred power role.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
-     - source
-     - sink
-     - dual
+      - source
+      - sink
+      - dual
 
   data-role:
     description: Data role if Type C connector supports USB data. "dual" refers
       Dual Role Device (DRD).
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - host
       - device
@@ -95,8 +95,7 @@ properties:
       defined in dt-bindings/usb/pd.h.
     minItems: 1
     maxItems: 7
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   sink-pdos:
     description: An array of u32 with each entry providing supported power sink
@@ -108,8 +107,7 @@ properties:
       in dt-bindings/usb/pd.h.
     minItems: 1
     maxItems: 7
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   op-sink-microwatt:
     description: Sink required operating power in microwatt, if source can't
Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +4 -5
index 57ae1c0b6d18..6dd658f0912c 100644
@@ -36,11 +36,10 @@ properties:
 
   dma-maxburst:
     description: Set number of maximum dma burst supported
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 2
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
 
 required:
   - compatible
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +3 -4
index 944ff2f1cf93..e77523b02fad 100644
@@ -66,10 +66,9 @@ properties:
       - allwinner,sun50i-h6-display-engine
 
   allwinner,pipelines:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +2 -3
index 87cb77b32ee3..4c15a2644a7c 100644
@@ -71,11 +71,10 @@ properties:
     maxItems: 4
 
   clock-output-names:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - maxItems: 1
     description:
       Name of the LCD pixel clock created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    maxItems: 1
 
   dmas:
     maxItems: 1
Documentation/devicetree/bindings/display/panel/panel-common.yaml +2 -3
index ed051ba12084..b05573de08f3 100644
@@ -48,9 +48,8 @@ properties:
   rotation:
     description:
       Display rotation in degrees counter clockwise (0,90,180,270)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 90, 180, 270 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
 
   # Display Timings
   panel-timing:
Documentation/devicetree/bindings/dma/dma-common.yaml +1 -2
index 02a34ba2b49b..c36592683340 100644
@@ -31,8 +31,7 @@ properties:
       kernel. i.e. first channel corresponds to LSB.
       The first item in the array is for channels 0-31, the second is for
       channels 32-63, etc.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minItems: 1
       # Should be enough
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +6 -12
index 85056982a242..10b74095935f 100644
@@ -78,25 +78,21 @@ properties:
 
   ti,sci:
     description: phandle to TI-SCI compatible System controller node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,sci-dev-id:
     description: TI-SCI device id of UDMAP
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,ringacc:
     description: phandle to the ring accelerator node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,sci-rm-range-tchan:
     description: |
       Array of UDMA tchan resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -105,8 +101,7 @@ properties:
     description: |
       Array of UDMA rchan resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -115,8 +110,7 @@ properties:
     description: |
       Array of UDMA rflow resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
Documentation/devicetree/bindings/eeprom/at24.yaml +4 -7
index a15787e504f0..de513fe333a7 100644
@@ -118,14 +118,13 @@ properties:
     maxItems: 1
 
   pagesize:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The length of the pagesize for writing. Please consult the
       manual of your device, that value varies a lot. A wrong value
       may result in data loss! If not specified, a safety value of
       '1' is used which will be very slow.
-    enum: [ 1, 8, 16, 32, 64, 128, 258 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 258]
     default: 1
 
   read-only:
@@ -148,18 +147,16 @@ properties:
   wp-gpios: true
 
   address-width:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of address bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 8
     enum: [ 8, 16 ]
 
   num-addresses:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Total number of i2c slave addresses this device takes.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 1
     minimum: 1
     maximum: 8
Documentation/devicetree/bindings/example-schema.yaml +6 -11
index 62811a1b5058..c9534d2164a2 100644
@@ -138,12 +138,8 @@ properties:
   # 'description'.
   vendor,int-property:
     description: Vendor specific properties must have a description
-    # 'allOf' is the json-schema way of subclassing a schema. Here the base
-    # type schema is referenced and then additional constraints on the values
-    # are added.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [2, 4, 6, 8, 10]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4, 6, 8, 10]
 
   vendor,bool-property:
     description: Vendor specific properties must have a description. Boolean
@@ -154,11 +150,10 @@ properties:
   vendor,string-array-property:
     description: Vendor specific properties should reference a type in the
       core schema.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - items:
-          - enum: [ foo, bar ]
-          - enum: [ baz, boo ]
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - enum: [foo, bar]
+      - enum: [baz, boo]
 
   vendor,property-in-standard-units-microvolt:
     description: Vendor specific properties having a standard unit suffix
Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +14 -18
index 44a63fffb4be..eef614962b10 100644
@@ -38,20 +38,18 @@ properties:
       the accumulated values, this entry can also have two items which sets
       energy1/charge1 and energy2/charger2 respectively. Check table 12 of the
       datasheet for more information on the supported options.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          enum: [0, 1, 2, 3]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2, 3]
+      default: 0
 
   adi,accumulation-deadband-microamp:
     description:
       This property controls the Accumulation Dead band which allows to set the
       level of current below which no accumulation takes place.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     default: 0
 
@@ -61,8 +59,7 @@ properties:
       active high, setting it to zero makets it active low. When this property
       is present, the GPIO is automatically configured as output and set to
       control a fan as a function of measured temperature.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
     default: 0
 
@@ -74,13 +71,12 @@ properties:
       registers. Check table 13 of the datasheet for more information on the
       supported options. This property cannot be used together with
       adi,gpio-out-pol.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          enum: [0, 1, 2]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2]
+      default: 0
 
 required:
   - compatible
Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +9 -12
index 3f043e943668..90b2fa3f7752 100644
@@ -45,16 +45,14 @@ properties:
       The gain value for the PGA function. This is 8, 4, 2 or 1.
       The PGA gain affect the shunt voltage range.
       The range will be equal to: pga-gain * 40mV
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
     default: 8
 
   ti,bus-range-microvolt:
     description: |
       This is the operating range of the bus voltage in microvolt
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [16000000, 32000000]
     default: 32000000
 
@@ -63,14 +61,13 @@ properties:
       Array of three(TMP513) or two(TMP512) n-Factor value for each remote
       temperature channel.
       See datasheet Table 11 for n-Factor range list and value interpretation.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-array
-      - minItems: 2
-        maxItems: 3
-        items:
-          default: 0x00
-          minimum: 0x00
-          maximum: 0xFF
+    $ref: /schemas/types.yaml#definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      default: 0x00
+      minimum: 0x00
+      maximum: 0xFF
 
 required:
   - compatible
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +4 -5
index 900ec1ab6a47..96630f225207 100644
@@ -30,11 +30,10 @@ allOf:
                        Fast Mode Plus speed is selected by slave.
                        Format is phandle to syscfg / register offset within
                        syscfg / register bitmask for FMP bit.
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-            - items:
-                minItems: 3
-                maxItems: 3
+          $ref: "/schemas/types.yaml#/definitions/phandle-array"
+          items:
+            minItems: 3
+            maxItems: 3
 
   - if:
       properties:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -3
index 97087a45ce54..deb34deff0e8 100644
@@ -83,9 +83,8 @@ patternProperties:
           1: REFIN2(+)/REFIN2(−).
           3: AVDD
           If this field is left empty, internal reference is selected.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 3]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
 
       diff-channels:
         description: see Documentation/devicetree/bindings/iio/adc/adc.txt
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +1 -2
index 97f521d654ea..6a991e9f78e2 100644
@@ -18,8 +18,7 @@ properties:
 
   vref-supply:
     description: phandle to an external regulator providing the reference voltage
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   reg:
     description: spi chipselect number according to the usual spi bindings
Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +3 -4
index 8ffeceb6abae..95ab285f4eba 100644
@@ -38,10 +38,9 @@ properties:
 
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
 
   vref-supply:
     description: |
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +13 -18
index b1627441a0b2..d69ca492d020 100644
@@ -95,16 +95,14 @@ patternProperties:
           On stm32h7 and stm32mp1:
           - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
           - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string-array
+        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |
@@ -112,11 +110,10 @@ patternProperties:
           - 0: FastSinC
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - items:
-              minimum: 0
-              maximum: 5
+        $ref: /schemas/types.yaml#/definitions/uint32
+        items:
+          minimum: 0
+          maximum: 5
 
       "#io-channel-cells":
         const: 1
@@ -129,9 +126,8 @@ patternProperties:
           - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
           - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
         items:
-          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+          enum: [SPI_R, SPI_F, MANCH_R, MANCH_F]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-channel-clk-src:
         description: |
@@ -141,9 +137,8 @@ patternProperties:
           - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
           - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
         items:
-          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+          enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-alt-channel:
         description:
Documentation/devicetree/bindings/iio/light/tsl2772.yaml +6 -7
index e8f7d1ada57b..d81229857944 100644
@@ -33,13 +33,12 @@ properties:
 
   amstaos,proximity-diodes:
     description: Proximity diodes to enable
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 2
-        items:
-          minimum: 0
-          maximum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
 
   interrupts:
     maxItems: 1
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +21 -35
index 8fb46de6641d..9480ede59c37 100644
@@ -42,10 +42,9 @@ properties:
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
 
   '#address-cells':
     const: 1
@@ -91,8 +90,7 @@ patternProperties:
           7 - Type T Thermocouple
           8 - Type B Thermocouple
           9 - Custom Thermocouple
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 1
         maximum: 9
 
@@ -121,8 +119,7 @@ patternProperties:
           more details look at table 69 and 70.
           Note should be signed, but dtc doesn't currently maintain the
           sign.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
@@ -138,8 +135,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a diode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
@@ -196,8 +192,7 @@ patternProperties:
           16 - RTD PT-1000 (0.00375)
           17 - RTD NI-120
           18 - RTD Custom
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 10
         maximum: 18
 
@@ -210,9 +205,8 @@ patternProperties:
         description:
           Identifies the number of wires used by the RTD. Setting this
           property to 5 means 4 wires with Kelvin Rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [2, 3, 4, 5]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 3, 4, 5]
 
       adi,rsense-share:
         description:
@@ -237,18 +231,16 @@ patternProperties:
         description:
           This property set the RTD curve used and the corresponding
           Callendar-VanDusen constants. Look at table 30 of the datasheet.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 0
-            maximum: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
 
       adi,custom-rtd:
         description:
           This is a table, where each entry should be a pair of
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK. For more details values look at table 74 and 75.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         items:
           minItems: 3
           maxItems: 64
@@ -280,8 +272,7 @@ patternProperties:
           25 - Thermistor Spectrum 1003k 1kohm
           26 - Thermistor Custom Steinhart-Hart
           27 - Custom Thermistor
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 19
         maximum: 27
 
@@ -314,10 +305,9 @@ patternProperties:
           This property controls the magnitude of the excitation current
           applied to the thermistor. Value 0 set's the sensor in auto-range
           mode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
-                   250000, 500000, 1000000]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
+          500000, 1000000]
 
       adi,custom-thermistor:
         description:
@@ -325,8 +315,7 @@ patternProperties:
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK only for custom thermistors. For more details look at table
           78 and 79.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
@@ -339,8 +328,7 @@ patternProperties:
           be programmed into the device memory using this property. For
           Steinhart sensors the coefficients are given in the raw
           format. Look at table 82 for more information.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
           minItems: 6
           maxItems: 6
@@ -358,8 +346,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a direct adc.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
@@ -379,8 +366,7 @@ patternProperties:
 
       adi,sensor-type:
         description: Identifies the sensor as a rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms:
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -3
index 512a6af5aa42..cffd02028d02 100644
@@ -42,9 +42,8 @@ patternProperties:
         description: Keycode to emit
 
       channel:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
         description: ADC Channel this key is attached to
 
       voltage:
Documentation/devicetree/bindings/input/input.yaml +4 -5
index 6d519046b3af..8edcb3c31270 100644
@@ -18,11 +18,10 @@ properties:
     description:
       Specifies an array of numeric keycode values to be used for reporting
       button presses.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minimum: 0
-          maximum: 0xff
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minimum: 0
+      maximum: 0xff
 
   poll-interval:
     description: Poll interval time in milliseconds.
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +17 -22
index 66aacd106503..1ecd1831cf02 100644
@@ -91,18 +91,16 @@ properties:
     description:
       If using padding pages, specifies the stride of consecutive
       redistributors. Must be a multiple of 64kB.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint64
-      - multipleOf: 0x10000
-        exclusiveMinimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint64
+    multipleOf: 0x10000
+    exclusiveMinimum: 0
 
   "#redistributor-regions":
     description:
       The number of independent contiguous regions occupied by the
       redistributors. Required if more than one such region is present.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 4096   # Should be enough?
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4096
 
   msi-controller:
     description:
@@ -114,22 +112,20 @@ properties:
       A list of pairs <intid span>, where "intid" is the first SPI of a range
       that can be used an MBI, and "span" the size of that range. Multiple
       ranges can be provided.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-      - items:
-          minItems: 2
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
 
   mbi-alias:
     description:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 1
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      maxItems: 2
 
   ppi-partitions:
     type: object
@@ -188,11 +184,10 @@ patternProperties:
         description:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minItems: 2
-              maxItems: 2
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 2
+          maxItems: 2
 
     required:
       - compatible
Documentation/devicetree/bindings/iommu/arm,smmu.yaml +1 -2
index 6515dbe47508..3aa554878b90 100644
@@ -56,8 +56,7 @@ properties:
 
   '#global-interrupts':
     description: The number of global interrupts exposed by the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
 
Documentation/devicetree/bindings/leds/common.yaml +5 -8
index 4c270fde4567..a2a541bca73c 100644
@@ -41,8 +41,7 @@ properties:
       Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
       the header include/dt-bindings/leds/common.h. If there is no matching
       LED_COLOR_ID available, add a new one.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#definitions/uint32
     minimum: 0
     maximum: 8
 
@@ -67,8 +66,7 @@ properties:
       produced where the LED momentarily turns off (or on). The "keep" setting
       will keep the LED at whatever its current state is, without producing a
       glitch.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
     enum:
       - on
       - off
@@ -79,8 +77,8 @@ properties:
     description:
       This parameter, if present, is a string defining the trigger assigned to
       the LED.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
         # LED will act as a back-light, controlled by the framebuffer system
       - backlight
@@ -111,8 +109,7 @@ properties:
           brightness and duration (in ms).  The exact format is
           described in:
           Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-matrix
+    $ref: /schemas/types.yaml#definitions/uint32-matrix
     items:
       minItems: 2
       maxItems: 2
Documentation/devicetree/bindings/leds/leds-gpio.yaml +1 -2
index 0e75b185dd19..7ad2baeda0b0 100644
@@ -24,8 +24,7 @@ patternProperties:
   "(^led-[0-9a-f]$|led)":
     type: object
 
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#
 
     properties:
       gpios:
Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +5 -5
index 90edf9d33b33..aa715edd93b0 100644
@@ -34,11 +34,11 @@ patternProperties:
         #- $ref: "common.yaml#"
       rohm,led-compatible:
         description: LED identification string
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/string"
-          - enum:
-            - bd71828-ambled
-            - bd71828-grnled
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum:
+
+          - bd71828-ambled
+          - bd71828-grnled
       function:
         description:
           Purpose of LED as defined in dt-bindings/leds/common.h
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +2 -3
index db851541d619..3b7ab61a144f 100644
@@ -49,9 +49,8 @@ properties:
 
   st,proc-id:
     description: Processor id using the mailbox (0 or 1)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
 required:
   - compatible
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +2 -4
index 5a1da4029c37..b902495d278b 100644
@@ -77,13 +77,11 @@ properties:
 
   amlogic,ao-sysctrl:
     description: should point to the AOBUS sysctrl node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   amlogic,canvas:
     description: should point to a canvas provider node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 allOf:
   - if:
Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +1 -2
index 95ffa8bc0533..c08e2ddf292a 100644
@@ -35,8 +35,7 @@ properties:
 
   hdmi-phandle:
     description: phandle to the HDMI controller
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 allOf:
   - if:
Documentation/devicetree/bindings/media/rc.yaml +132 -133
index b27c9385d490..ded2ac43237d 100644
@@ -18,136 +18,135 @@ properties:
     description:
       Specifies the scancode/key mapping table defined in-kernel for
       the remote controller.
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/string'
-      - enum:
-          - rc-adstech-dvb-t-pci
-          - rc-alink-dtu-m
-          - rc-anysee
-          - rc-apac-viewcomp
-          - rc-astrometa-t2hybrid
-          - rc-asus-pc39
-          - rc-asus-ps3-100
-          - rc-ati-tv-wonder-hd-600
-          - rc-ati-x10
-          - rc-avermedia
-          - rc-avermedia-a16d
-          - rc-avermedia-cardbus
-          - rc-avermedia-dvbt
-          - rc-avermedia-m135a
-          - rc-avermedia-m733a-rm-k6
-          - rc-avermedia-rm-ks
-          - rc-avertv-303
-          - rc-azurewave-ad-tu700
-          - rc-beelink-gs1
-          - rc-behold
-          - rc-behold-columbus
-          - rc-budget-ci-old
-          - rc-cec
-          - rc-cinergy
-          - rc-cinergy-1400
-          - rc-d680-dmb
-          - rc-delock-61959
-          - rc-dib0700-nec
-          - rc-dib0700-rc5
-          - rc-digitalnow-tinytwin
-          - rc-digittrade
-          - rc-dm1105-nec
-          - rc-dntv-live-dvb-t
-          - rc-dntv-live-dvbt-pro
-          - rc-dtt200u
-          - rc-dvbsky
-          - rc-dvico-mce
-          - rc-dvico-portable
-          - rc-em-terratec
-          - rc-empty
-          - rc-encore-enltv
-          - rc-encore-enltv-fm53
-          - rc-encore-enltv2
-          - rc-evga-indtube
-          - rc-eztv
-          - rc-flydvb
-          - rc-flyvideo
-          - rc-fusionhdtv-mce
-          - rc-gadmei-rm008z
-          - rc-geekbox
-          - rc-genius-tvgo-a11mce
-          - rc-gotview7135
-          - rc-hauppauge
-          - rc-hisi-poplar
-          - rc-hisi-tv-demo
-          - rc-imon-mce
-          - rc-imon-pad
-          - rc-imon-rsc
-          - rc-iodata-bctv7e
-          - rc-it913x-v1
-          - rc-it913x-v2
-          - rc-kaiomy
-          - rc-khadas
-          - rc-kworld-315u
-          - rc-kworld-pc150u
-          - rc-kworld-plus-tv-analog
-          - rc-leadtek-y04g0051
-          - rc-lme2510
-          - rc-manli
-          - rc-medion-x10
-          - rc-medion-x10-digitainer
-          - rc-medion-x10-or2x
-          - rc-msi-digivox-ii
-          - rc-msi-digivox-iii
-          - rc-msi-tvanywhere
-          - rc-msi-tvanywhere-plus
-          - rc-nebula
-          - rc-nec-terratec-cinergy-xs
-          - rc-norwood
-          - rc-npgtech
-          - rc-odroid
-          - rc-pctv-sedna
-          - rc-pinnacle-color
-          - rc-pinnacle-grey
-          - rc-pinnacle-pctv-hd
-          - rc-pixelview
-          - rc-pixelview-002t
-          - rc-pixelview-mk12
-          - rc-pixelview-new
-          - rc-powercolor-real-angel
-          - rc-proteus-2309
-          - rc-purpletv
-          - rc-pv951
-          - rc-rc5-tv
-          - rc-rc6-mce
-          - rc-real-audio-220-32-keys
-          - rc-reddo
-          - rc-snapstream-firefly
-          - rc-streamzap
-          - rc-su3000
-          - rc-tango
-          - rc-tanix-tx3mini
-          - rc-tanix-tx5max
-          - rc-tbs-nec
-          - rc-technisat-ts35
-          - rc-technisat-usb2
-          - rc-terratec-cinergy-c-pci
-          - rc-terratec-cinergy-s2-hd
-          - rc-terratec-cinergy-xs
-          - rc-terratec-slim
-          - rc-terratec-slim-2
-          - rc-tevii-nec
-          - rc-tivo
-          - rc-total-media-in-hand
-          - rc-total-media-in-hand-02
-          - rc-trekstor
-          - rc-tt-1500
-          - rc-twinhan-dtv-cab-ci
-          - rc-twinhan1027
-          - rc-videomate-k100
-          - rc-videomate-s350
-          - rc-videomate-tv-pvr
-          - rc-videostrong-kii-pro
-          - rc-wetek-hub
-          - rc-wetek-play2
-          - rc-winfast
-          - rc-winfast-usbii-deluxe
-          - rc-x96max
-          - rc-xbox-dvd
-          - rc-zx-irdec
+    $ref: '/schemas/types.yaml#/definitions/string'
+    enum:
+      - rc-adstech-dvb-t-pci
+      - rc-alink-dtu-m
+      - rc-anysee
+      - rc-apac-viewcomp
+      - rc-astrometa-t2hybrid
+      - rc-asus-pc39
+      - rc-asus-ps3-100
+      - rc-ati-tv-wonder-hd-600
+      - rc-ati-x10
+      - rc-avermedia
+      - rc-avermedia-a16d
+      - rc-avermedia-cardbus
+      - rc-avermedia-dvbt
+      - rc-avermedia-m135a
+      - rc-avermedia-m733a-rm-k6
+      - rc-avermedia-rm-ks
+      - rc-avertv-303
+      - rc-azurewave-ad-tu700
+      - rc-beelink-gs1
+      - rc-behold
+      - rc-behold-columbus
+      - rc-budget-ci-old
+      - rc-cec
+      - rc-cinergy
+      - rc-cinergy-1400
+      - rc-d680-dmb
+      - rc-delock-61959
+      - rc-dib0700-nec
+      - rc-dib0700-rc5
+      - rc-digitalnow-tinytwin
+      - rc-digittrade
+      - rc-dm1105-nec
+      - rc-dntv-live-dvb-t
+      - rc-dntv-live-dvbt-pro
+      - rc-dtt200u
+      - rc-dvbsky
+      - rc-dvico-mce
+      - rc-dvico-portable
+      - rc-em-terratec
+      - rc-empty
+      - rc-encore-enltv
+      - rc-encore-enltv-fm53
+      - rc-encore-enltv2
+      - rc-evga-indtube
+      - rc-eztv
+      - rc-flydvb
+      - rc-flyvideo
+      - rc-fusionhdtv-mce
+      - rc-gadmei-rm008z
+      - rc-geekbox
+      - rc-genius-tvgo-a11mce
+      - rc-gotview7135
+      - rc-hauppauge
+      - rc-hisi-poplar
+      - rc-hisi-tv-demo
+      - rc-imon-mce
+      - rc-imon-pad
+      - rc-imon-rsc
+      - rc-iodata-bctv7e
+      - rc-it913x-v1
+      - rc-it913x-v2
+      - rc-kaiomy
+      - rc-khadas
+      - rc-kworld-315u
+      - rc-kworld-pc150u
+      - rc-kworld-plus-tv-analog
+      - rc-leadtek-y04g0051
+      - rc-lme2510
+      - rc-manli
+      - rc-medion-x10
+      - rc-medion-x10-digitainer
+      - rc-medion-x10-or2x
+      - rc-msi-digivox-ii
+      - rc-msi-digivox-iii
+      - rc-msi-tvanywhere
+      - rc-msi-tvanywhere-plus
+      - rc-nebula
+      - rc-nec-terratec-cinergy-xs
+      - rc-norwood
+      - rc-npgtech
+      - rc-odroid
+      - rc-pctv-sedna
+      - rc-pinnacle-color
+      - rc-pinnacle-grey
+      - rc-pinnacle-pctv-hd
+      - rc-pixelview
+      - rc-pixelview-002t
+      - rc-pixelview-mk12
+      - rc-pixelview-new
+      - rc-powercolor-real-angel
+      - rc-proteus-2309
+      - rc-purpletv
+      - rc-pv951
+      - rc-rc5-tv
+      - rc-rc6-mce
+      - rc-real-audio-220-32-keys
+      - rc-reddo
+      - rc-snapstream-firefly
+      - rc-streamzap
+      - rc-su3000
+      - rc-tango
+      - rc-tanix-tx3mini
+      - rc-tanix-tx5max
+      - rc-tbs-nec
+      - rc-technisat-ts35
+      - rc-technisat-usb2
+      - rc-terratec-cinergy-c-pci
+      - rc-terratec-cinergy-s2-hd
+      - rc-terratec-cinergy-xs
+      - rc-terratec-slim
+      - rc-terratec-slim-2
+      - rc-tevii-nec
+      - rc-tivo
+      - rc-total-media-in-hand
+      - rc-total-media-in-hand-02
+      - rc-trekstor
+      - rc-tt-1500
+      - rc-twinhan-dtv-cab-ci
+      - rc-twinhan1027
+      - rc-videomate-k100
+      - rc-videomate-s350
+      - rc-videomate-tv-pvr
+      - rc-videostrong-kii-pro
+      - rc-wetek-hub
+      - rc-wetek-play2
+      - rc-winfast
+      - rc-winfast-usbii-deluxe
+      - rc-x96max
+      - rc-xbox-dvd
+      - rc-zx-irdec
Documentation/devicetree/bindings/media/renesas,vin.yaml +3 -4
index ecc09f1124d4..6d473cdcb16a 100644
@@ -116,10 +116,9 @@ properties:
   #The per-board settings for Gen3 and RZ/G2 platforms:
   renesas,id:
     description: VIN channel number
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 15
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
 
   ports:
     type: object
Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +6 -8
index cdfe3f7f0ea9..0dc008e816e2 100644
@@ -51,11 +51,10 @@ patternProperties:
         maxItems: 1
 
       reg-io-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2]
 
       samsung,srom-page-mode:
         description:
@@ -64,11 +63,10 @@ patternProperties:
         type: boolean
 
       samsung,srom-timing:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minItems: 6
-              maxItems: 6
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 6
+          maxItems: 6
         description: |
           Array of 6 integers, specifying bank timings in the following order:
           Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +3 -6
index 3e0a8a92d652..a3b36dea88b6 100644
@@ -73,10 +73,9 @@ patternProperties:
               timings
 
           nvidia,emc-auto-cal-interval:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               pad calibration interval in microseconds
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 2097151
 
@@ -136,11 +135,10 @@ patternProperties:
               value of the EMC_XM2DQSPADCTRL2 register for this set of timings
 
           nvidia,emc-zcal-cnt-long:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               number of EMC clocks to wait before issuing any commands after
               clock change
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 1023
 
@@ -150,12 +148,11 @@ patternProperties:
               value of the EMC_ZCAL_INTERVAL register for this set of timings
 
           nvidia,emc-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers (see
               section "15.6.2 EMC Registers" in the TRM) whose values need to
               be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             items:
               - description: EMC_RC
               - description: EMC_RFC
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +1 -2
index 22a94b6fdbde..30d9fb193d7f 100644
@@ -60,8 +60,7 @@ patternProperties:
             maximum: 1066000000
 
           nvidia,emem-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "15.6.1 MC Registers" in the TRM.
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +3 -6
index e4135bac6957..112bae2fcbbd 100644
@@ -56,10 +56,9 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emc-auto-cal-interval:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Pad calibration interval in microseconds.
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 2097151
 
@@ -79,11 +78,10 @@ patternProperties:
               Mode Register 0.
 
           nvidia,emc-zcal-cnt-long:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Number of EMC clocks to wait before issuing any commands after
               sending ZCAL_MRW_CMD.
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 1023
 
@@ -98,12 +96,11 @@ patternProperties:
               FBIO "read" FIFO periodic resetting enabled.
 
           nvidia,emc-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers
               (see section "18.13.2 EMC Registers" in the TRM) whose values
               need to be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             items:
               - description: EMC_RC
               - description: EMC_RFC
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +1 -2
index 4b9196c83291..84fd57bcf0dc 100644
@@ -77,8 +77,7 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emem-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "18.13.1 MC Registers" in the TRM.
Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +10 -10
index 39afacc447b2..f591332fc462 100644
@@ -31,19 +31,19 @@ properties:
     description: A touchscreen is attached to the controller
 
   allwinner,tp-sensitive-adjust:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 15
-        default: 15
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 15
+
     description: Sensitivity of pen down detection
 
   allwinner,filter-type:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 3
-        default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
     description: |
       Select median and averaging filter. Sample used for median /
       averaging filter:
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +16 -17
index 4acda7ce3b44..f212fc6e1661 100644
@@ -67,23 +67,22 @@ properties:
         description:
           One or two <index level filter> to describe break input
           configurations.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          - items:
-              items:
-                - description: |
-                    "index" indicates on which break input (0 or 1) the
-                    configuration should be applied.
-                  enum: [ 0 , 1]
-                - description: |
-                    "level" gives the active level (0=low or 1=high) of the
-                    input signal for this configuration
-                  enum: [ 0, 1 ]
-                - description: |
-                    "filter" gives the filtering value (up to 15) to be applied.
-                  maximum: 15
-            minItems: 1
-            maxItems: 2
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "index" indicates on which break input (0 or 1) the
+                configuration should be applied.
+              enum: [0, 1]
+            - description: |
+                "level" gives the active level (0=low or 1=high) of the
+                input signal for this configuration
+              enum: [0, 1]
+            - description: |
+                "filter" gives the filtering value (up to 15) to be applied.
+              maximum: 15
+        minItems: 1
+        maxItems: 2
 
     required:
       - "#pwm-cells"
Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +3 -6
index d9ad9260e348..a10dceae9bc5 100644
@@ -29,8 +29,7 @@ properties:
   onkey:
     type: object
 
-    allOf:
-      - $ref: ../input/input.yaml
+    $ref: ../input/input.yaml
 
     properties:
       compatible:
@@ -68,8 +67,7 @@ properties:
   watchdog:
     type: object
 
-    allOf:
-      - $ref: ../watchdog/watchdog.yaml
+    $ref: ../watchdog/watchdog.yaml
 
     properties:
       compatible:
@@ -190,8 +188,7 @@ properties:
         description: STPMIC1 voltage regulators supplies
 
       "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
-        allOf:
-          - $ref: ../regulator/regulator.yaml
+        $ref: ../regulator/regulator.yaml
 
       "^ldo[1-2,5-6]$":
         type: object
Documentation/devicetree/bindings/mfd/syscon.yaml +2 -3
index 7a39486b215a..19bdaf781853 100644
@@ -52,9 +52,8 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 2, 4, 8 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
 
   hwlocks:
     maxItems: 1
Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +2 -2
index 200de9396036..987b287f3bff 100644
@@ -41,8 +41,8 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    allOf:
-        - $ref: mmc-controller.yaml
+    $ref: mmc-controller.yaml
+
     properties:
       compatible:
         enum:
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +33 -44
index d43a0c557a44..d93f7794a85f 100644
@@ -36,91 +36,80 @@ properties:
 
   cdns,phy-input-delay-sd-highspeed:
     description: Value of the delay in the input path for SD high-speed timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-legacy:
     description: Value of the delay in the input path for legacy timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr12:
     description: Value of the delay in the input path for SD UHS SDR12 timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr25:
     description: Value of the delay in the input path for SD UHS SDR25 timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr50:
     description: Value of the delay in the input path for SD UHS SDR50 timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-ddr50:
     description: Value of the delay in the input path for SD UHS DDR50 timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-mmc-highspeed:
     description: Value of the delay in the input path for MMC high-speed timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-input-delay-mmc-ddr:
     description: Value of the delay in the input path for eMMC high-speed DDR timing
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x1f
 
   # PHY DLL clock delays:
   # Each delay property represents the fraction of the clock period.
   # The approximate delay value will be
   # (<delay property value>/128)*sdmclk_clock_period.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
 
   cdns,phy-dll-delay-sdclk:
     description: |
       Value of the delay introduced on the sdclk output for all modes except
       HS200, HS400 and HS400_ES.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x7f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x7f
 
   cdns,phy-dll-delay-sdclk-hsmmc:
     description: |
       Value of the delay introduced on the sdclk output for HS200, HS400 and
       HS400_ES speed modes.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x7f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x7f
 
   cdns,phy-dll-delay-strobe:
     description: |
       Value of the delay introduced on the dat_strobe input used in
       HS400 / HS400_ES speed modes.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-      - maximum: 0x7f
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x7f
 
 required:
   - compatible
Documentation/devicetree/bindings/mmc/mmc-controller.yaml +16 -21
index acc9f10871d4..4931fab34d81 100644
@@ -76,20 +76,18 @@ properties:
   # Other properties
 
   bus-width:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4, 8]
-        default: 1
     description:
       Number of data lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4, 8]
+    default: 1
 
   max-frequency:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 400000
-      - maximum: 200000000
     description:
       Maximum operating frequency of the bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 400000
+    maximum: 200000000
 
   disable-wp:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -212,13 +210,12 @@ properties:
       eMMC HS400 enhanced strobe mode is supported
 
   dsr:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 0xffff
     description:
       Value the card Driver Stage Register (DSR) should be programmed
       with.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xffff
 
   no-sdio:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -238,25 +235,23 @@ properties:
       initialization.
 
   fixed-emmc-driver-type:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 4
     description:
       For non-removable eMMC, enforce this driver type. The value is
       the driver type as specified in the eMMC specification (table
       206 in spec version 5.1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4
 
   post-power-on-delay-ms:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 10
     description:
       It was invented for MMC pwrseq-simple which could be referred to
       mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
       waiting for I/O signalling and card power supply to be stable,
       regardless of whether pwrseq-simple is used. Default to 10ms if
       no available.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 10
 
   supports-cqe:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -333,8 +328,8 @@ patternProperties:
       - reg
 
   "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
     minItems: 2
     maxItems: 2
     items:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +2 -4
index 4ee3ed6efab4..42d44cbf962f 100644
@@ -76,8 +76,7 @@ properties:
       high speed modes.
 
   rockchip,default-sample-phase:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 360
     default: 0
@@ -87,8 +86,7 @@ properties:
       If not specified 0 deg will be used.
 
   rockchip,desired-num-phases:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 360
     default: 360
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +5 -9
index 890d47a87ac5..85bd528e9a14 100644
@@ -27,39 +27,35 @@ properties:
       clock to this at probe time.
 
   fifo-depth:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The maximum size of the tx/rx fifo's. If this property is not
       specified, the default value of the fifo size is determined from the
       controller registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   card-detect-delay:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
     description:
       Delay in milli-seconds before detecting card after card
       insert event. The default value is 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   data-addr:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Override fifo address with value provided by DT. The default FIFO reg
       offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
       by driver. If the controller does not follow this rule, please use
       this property to set fifo address in device tree.
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   fifo-watermark-aligned:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/flag
     description:
       Data done irq is expected if data length is less than
       watermark in PIO mode. But fifo watermark is requested to be aligned
       with data length in some SoC so that TX/RX irq can be generated with
       data done irq. Add this watermark quirk to mark this requirement and
       force fifo watermark setting accordingly.
+    $ref: /schemas/types.yaml#/definitions/flag
 
   dmas:
     maxItems: 1
Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +6 -7
index 5d3fa412aabd..c033ac3f147d 100644
@@ -75,13 +75,12 @@ patternProperties:
       allwinner,rb:
         description:
           Contains the native Ready/Busy IDs.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 2
-            items:
-              minimum: 0
-              maximum: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
 
     additionalProperties: false
 
Documentation/devicetree/bindings/mtd/nand-controller.yaml +11 -16
index d261b7096c69..cde7c4d79efe 100644
@@ -47,29 +47,26 @@ patternProperties:
           Contains the native Ready/Busy IDs.
 
       nand-ecc-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
         description:
           Desired ECC engine, either hardware (most of the time
           embedded in the NAND controller) or software correction
           (Linux will handle the calculations). soft_bch is deprecated
           and should be replaced by soft and nand-ecc-algo.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
       nand-ecc-algo:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ hamming, bch, rs ]
         description:
           Desired ECC algorithm.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [hamming, bch, rs]
 
       nand-bus-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 8, 16 ]
-          - default: 8
         description:
           Bus width to the NAND chip
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [8, 16]
+        default: 8
 
       nand-on-flash-bbt:
         $ref: /schemas/types.yaml#/definitions/flag
@@ -83,18 +80,16 @@ patternProperties:
           build a volatile BBT in RAM.
 
       nand-ecc-strength:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
         description:
           Maximum number of bits that can be corrected per ECC step.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
 
       nand-ecc-step-size:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
         description:
           Number of data bytes covered by a single ECC step.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
 
       nand-ecc-maximize:
         $ref: /schemas/types.yaml#/definitions/flag
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +29 -30
index 7a784dc4e513..798fa5fb7bb2 100644
@@ -76,36 +76,35 @@ properties:
 
       Please refer to 2.4.1 Message RAM Configuration in Bosch
       M_CAN user manual for details.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/int32-array
-      - items:
-         items:
-           - description: The 'offset' is an address offset of the Message RAM
-                          where the following elements start from. This is usually
-                          set to 0x0 if you're using a private Message RAM.
-             default: 0
-           - description: 11-bit Filter 0-128 elements / 0-128 words
-             minimum: 0
-             maximum: 128
-           - description: 29-bit Filter 0-64 elements / 0-128 words
-             minimum: 0
-             maximum: 64
-           - description: Rx FIFO 0 0-64 elements / 0-1152 words
-             minimum: 0
-             maximum: 64
-           - description: Rx FIFO 1 0-64 elements / 0-1152 words
-             minimum: 0
-             maximum: 64
-           - description: Rx Buffers 0-64 elements / 0-1152 words
-             minimum: 0
-             maximum: 64
-           - description: Tx Event FIFO 0-32 elements / 0-64 words
-             minimum: 0
-             maximum: 32
-           - description: Tx Buffers 0-32 elements / 0-576 words
-             minimum: 0
-             maximum: 32
-        maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    items:
+      items:
+        - description: The 'offset' is an address offset of the Message RAM where
+            the following elements start from. This is usually set to 0x0 if
+            you're using a private Message RAM.
+          default: 0
+        - description: 11-bit Filter 0-128 elements / 0-128 words
+          minimum: 0
+          maximum: 128
+        - description: 29-bit Filter 0-64 elements / 0-128 words
+          minimum: 0
+          maximum: 64
+        - description: Rx FIFO 0 0-64 elements / 0-1152 words
+          minimum: 0
+          maximum: 64
+        - description: Rx FIFO 1 0-64 elements / 0-1152 words
+          minimum: 0
+          maximum: 64
+        - description: Rx Buffers 0-64 elements / 0-1152 words
+          minimum: 0
+          maximum: 64
+        - description: Tx Event FIFO 0-32 elements / 0-64 words
+          minimum: 0
+          maximum: 32
+        - description: Tx Buffers 0-32 elements / 0-576 words
+          minimum: 0
+          maximum: 32
+    maxItems: 1
 
   can-transceiver:
     $ref: can-transceiver.yaml#
Documentation/devicetree/bindings/net/ethernet-controller.yaml +15 -19
index ac471b60ed6a..1c4474036d46 100644
@@ -14,25 +14,23 @@ properties:
     pattern: "^ethernet(@.*)?$"
 
   local-mac-address:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-      - items:
-          - minItems: 6
-            maxItems: 6
     description:
       Specifies the MAC address that was assigned to the network device.
+    $ref: /schemas/types.yaml#definitions/uint8-array
+    items:
+      - minItems: 6
+        maxItems: 6
 
   mac-address:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-      - items:
-          - minItems: 6
-            maxItems: 6
     description:
       Specifies the MAC address that was last used by the boot
       program; should be used in cases where the MAC address assigned
       to the device by the boot program is different from the
       local-mac-address property.
+    $ref: /schemas/types.yaml#definitions/uint8-array
+    items:
+      - minItems: 6
+        maxItems: 6
 
   max-frame-size:
     $ref: /schemas/types.yaml#definitions/uint32
@@ -133,15 +131,14 @@ properties:
       is used for components that can have configurable fifo sizes.
 
   managed:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
-      - default: auto
-        enum:
-          - auto
-          - in-band-status
     description:
       Specifies the PHY management type. If auto is set and fixed-link
       is not specified, it uses MDIO for management.
+    $ref: /schemas/types.yaml#definitions/string
+    default: auto
+    enum:
+      - auto
+      - in-band-status
 
   fixed-link:
     allOf:
@@ -183,11 +180,10 @@ properties:
         then:
           properties:
             speed:
-              allOf:
-                - $ref: /schemas/types.yaml#definitions/uint32
-                - enum: [10, 100, 1000]
               description:
                 Link speed.
+              $ref: /schemas/types.yaml#definitions/uint32
+              enum: [10, 100, 1000]
 
             full-duplex:
               $ref: /schemas/types.yaml#definitions/flag
Documentation/devicetree/bindings/net/qca,ar803x.yaml +6 -11
index 5a6c9d20c0ba..1788884b8c28 100644
@@ -20,15 +20,13 @@ allOf:
 properties:
   qca,clk-out-frequency:
     description: Clock output frequency in Hertz.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 25000000, 50000000, 62500000, 125000000 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [25000000, 50000000, 62500000, 125000000]
 
   qca,clk-out-strength:
     description: Clock output driver strength.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
 
   qca,keep-pll-enabled:
     description: |
@@ -52,17 +50,14 @@ properties:
     type: object
     description:
       Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
-    allOf:
-      - $ref: /schemas/regulator/regulator.yaml
+    $ref: /schemas/regulator/regulator.yaml
 
   vddh-regulator:
     type: object
     description:
       Dummy subnode to model the external connection of the PHY VDDH
       regulator to VDDIO.
-    allOf:
-      - $ref: /schemas/regulator/regulator.yaml
-
+    $ref: /schemas/regulator/regulator.yaml
 
 examples:
   - |
Documentation/devicetree/bindings/net/snps,dwmac.yaml +9 -13
index e08cd4c4d568..3c825c74d596 100644
@@ -199,14 +199,13 @@ properties:
 
   snps,reset-delays-us:
     deprecated: true
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-array
-      - minItems: 3
-        maxItems: 3
     description:
       Triplet of delays. The 1st cell is reset pre-delay in micro
       seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
       cell is reset post-delay in micro seconds.
+    $ref: /schemas/types.yaml#definitions/uint32-array
+    minItems: 3
+    maxItems: 3
 
   snps,aal:
     $ref: /schemas/types.yaml#definitions/flag
@@ -301,27 +300,24 @@ allOf:
     then:
       properties:
         snps,pbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Programmable Burst Length (tx and rx)
+          $ref: /schemas/types.yaml#definitions/uint32
+          enum: [2, 4, 8]
 
         snps,txpbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Tx Programmable Burst Length. If set, DMA tx will use this
             value rather than snps,pbl.
+          $ref: /schemas/types.yaml#definitions/uint32
+          enum: [2, 4, 8]
 
         snps,rxpbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Rx Programmable Burst Length. If set, DMA rx will use this
             value rather than snps,pbl.
+          $ref: /schemas/types.yaml#definitions/uint32
+          enum: [2, 4, 8]
 
         snps,no-pbl-x8:
           $ref: /schemas/types.yaml#definitions/flag
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +1 -2
index 8fc8d3be303b..1dd5a9bd9db7 100644
@@ -150,10 +150,9 @@ properties:
 patternProperties:
   "^mdio@":
     type: object
-    allOf:
-      - $ref: "ti,davinci-mdio.yaml#"
     description:
       CPSW MDIO bus.
+    $ref: "ti,davinci-mdio.yaml#"
 
 
 required:
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +3 -4
index 2ea14ab29254..d454c1fab930 100644
@@ -40,10 +40,9 @@ properties:
   ti,hwmods:
     description: TI hwmod name
     deprecated: true
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - items:
-          const: davinci_mdio
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      const: davinci_mdio
 
 if:
   properties:
Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +3 -4
index 48a98dae00de..64b2c64ca806 100644
@@ -71,10 +71,9 @@ properties:
 
   max-link-speed:
     description: Specify PCI Gen for link capability.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 2, 3, 4 ]
-      - default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 1
 
   bus-range:
     description: Range of bus numbers associated with this controller.
Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +5 -7
index bfefd09d8c1e..7556be6e2754 100644
@@ -84,13 +84,12 @@ properties:
   gpio-line-names: true
 
   input-debounce:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 5
     description:
       Debouncing periods in microseconds, one period per interrupt
       bank found in the controller
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 5
 
 patternProperties:
   # It's pretty scary, but the basic idea is that:
@@ -115,9 +114,8 @@ patternProperties:
       bias-pull-down: true
 
       drive-strength:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 10, 20, 30, 40 ]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [10, 20, 30, 40]
 
     required:
       - pins
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +17 -20
index 7651a675ab2d..017d9593573b 100644
@@ -33,26 +33,23 @@ patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
-              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
-              DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,
-              GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,
-              I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,
-              LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,
-              NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
-              NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,
-              NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,
-              PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,
-              ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
-              SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
-              SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,
-              SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,
-              TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,
-              USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,
-              VPO12, VPO24, WDTRST1, WDTRST2 ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+            ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+            EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+            GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+            I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+            MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+            NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+            NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+            PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+            RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+            RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+            SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+            SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+            SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+            TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+            VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
 required:
   - compatible
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +21 -24
index 36feaf5e2dff..0172b78e2f27 100644
@@ -29,8 +29,8 @@ properties:
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
     description: |
       A cell of phandles to external controller nodes:
       0: compatible with "aspeed,ast2500-gfx", "syscon"
@@ -43,28 +43,25 @@ patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
-              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
-              DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4,
-              GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13,
-              I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1,
-              LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST,
-              LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2,
-              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
-              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
-              NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2,
-              PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1,
-              RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
-              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
-              SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI,
-              SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1,
-              SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO,
-              SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1,
-              TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD,
-              USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1,
-              WDTRST2, ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+            ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+            ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+            GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+            I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+            LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+            MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+            NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+            NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+            PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+            RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+            SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+            SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+            SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+            SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+            TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+            USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+            VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
 required:
   - compatible
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +51 -57
index 45af29bc3202..1506726c7fea 100644
@@ -30,64 +30,58 @@ patternProperties:
     then:
       properties:
         function:
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
-              ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
-              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
-              I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
-              I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
-              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
-              MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
-              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
-              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
-              NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
-              PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7,
-              PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
-              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
-              SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
-              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
-              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
-              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
-              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
-              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
-              UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
-              USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+            ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+            FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+            GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+            GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+            I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+            I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+            MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+            NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+            NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+            NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+            PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+            PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+            RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+            SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+            SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
+            SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+            SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+            TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+            THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+            UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+            USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
+
         groups:
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
-              EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
-              FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
-              GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
-              GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
-              I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
-              I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
-              LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
-              MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
-              NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
-              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
-              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
-              PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
-              PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
-              PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
-              RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
-              SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
-              SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
-              SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
-              SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
-              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
-              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
-              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
-              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
-              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,
-              USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+            ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+            EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+            GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+            GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+            I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+            I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+            LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+            MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+            NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+            NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+            OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+            PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+            PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+            QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+            RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+            SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+            SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+            SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+            SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
+            SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+            TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+            TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+            TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+            UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+            WDTRST3, WDTRST4]
 
 required:
   - compatible
Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +15 -16
index 6297e78418cf..d474bc1f393b 100644
@@ -37,22 +37,21 @@ patternProperties:
           be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
           integer CONFIG is the pad setting value like pull-up on this pin. Please
           refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          - items:
-              items:
-                - description: |
-                    "mux_reg" indicates the offset of mux register.
-                - description: |
-                    "conf_reg" indicates the offset of pad configuration register.
-                - description: |
-                    "input_reg" indicates the offset of select input register.
-                - description: |
-                    "mux_val" indicates the mux value to be applied.
-                - description: |
-                    "input_val" indicates the select input value to be applied.
-                - description: |
-                    "pad_setting" indicates the pad configuration value to be applied.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
 
     required:
       - fsl,pins
Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +1 -3
index cd2b436350ef..2c0acb405e6c 100644
@@ -24,12 +24,10 @@ properties:
 patternProperties:
   '-pins$':
     type: object
-    allOf:
-      - $ref: pincfg-node.yaml#
-      - $ref: pinmux-node.yaml#
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
 
     properties:
       function: true
Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +1 -2
index 732d9075560b..ef8877ddb1eb 100644
@@ -122,11 +122,10 @@ properties:
       this, "pins" or "pinmux" has to be specified)
 
   pinmux:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
     description:
       The list of numeric pin ids and their mux settings that properties in the
       node apply to (either this, "pins" or "groups" have to be specified)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   pinctrl-pin-array:
     $ref: /schemas/types.yaml#/definitions/uint32-array
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +25 -31
index 46a0478cb924..e9d6e54fc0a0 100644
@@ -37,21 +37,18 @@ properties:
   hwlocks: true
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: Should be phandle/offset/mask
       - Phandle to the syscon node which includes IRQ mux selection.
       - The offset of the IRQ mux selection register.
       - The field mask of IRQ mux, needed if different of 0xf.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
 
   st,package:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 2, 4, 8]
     description:
      Indicates the SOC package used.
      More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
-
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
 
 patternProperties:
   '^gpio@[0-9a-f]*$':
@@ -78,33 +75,31 @@ patternProperties:
         maximum: 16
 
       st,bank-name:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/string"
-          - enum:
-            - GPIOA
-            - GPIOB
-            - GPIOC
-            - GPIOD
-            - GPIOE
-            - GPIOF
-            - GPIOG
-            - GPIOH
-            - GPIOI
-            - GPIOJ
-            - GPIOK
-            - GPIOZ
         description:
           Should be a name string for this bank as specified in the datasheet.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum:
 
-      st,bank-ioport:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-          - maximum: 11
+          - GPIOA
+          - GPIOB
+          - GPIOC
+          - GPIOD
+          - GPIOE
+          - GPIOF
+          - GPIOG
+          - GPIOH
+          - GPIOI
+          - GPIOJ
+          - GPIOK
+          - GPIOZ
 
+      st,bank-ioport:
         description:
           Should correspond to the EXTI IOport selection (EXTI line used
           to select GPIOs as interrupts).
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 11
 
     required:
       - gpio-controller
@@ -125,8 +120,8 @@ patternProperties:
           configuration, pullups, drive, output high/low and output speed.
         properties:
           pinmux:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint32-array"
+            $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
             description: |
               Integer array, represents gpio pin number and mux setting.
               Supported pin number and mux varies for different SoCs, and are
@@ -180,9 +175,8 @@ patternProperties:
               1: Medium speed
               2: Fast speed
               3: High speed
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - enum: [0, 1, 2, 3]
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
 
         required:
           - pinmux
Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +1 -2
index 6c6079fe1351..49fd3feabba5 100644
@@ -56,8 +56,7 @@ properties:
 
   amlogic,ao-sysctrl:
     description: phandle to the AO sysctrl node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
   - compatible
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +5 -6
index 4fe64f4dd594..fc799b0577d4 100644
@@ -78,12 +78,11 @@ properties:
       A list of PWM channels used as PWM outputs on particular platform.
       It is an array of up to 5 elements being indices of PWM channels
       (from 0 to 4), the order does not matter.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - uniqueItems: true
-      - items:
-          minimum: 0
-          maximum: 4
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    uniqueItems: true
+    items:
+      minimum: 0
+      maximum: 4
 
 required:
   - clocks
Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +16 -19
index 9d3b28417fb6..605590384b48 100644
@@ -46,24 +46,22 @@ properties:
         0: LOW
         1: HIGH
       Default is LOW if nothing else is specified.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - maxItems: 8
-        items:
-          enum: [ 0, 1 ]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 8
+    items:
+      enum: [0, 1]
+      default: 0
 
   states:
     description: Selection of available voltages/currents provided by this
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-      - maxItems: 8
-        items:
-          items:
-            - description: Voltage in microvolts
-            - description: GPIO group state value
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 8
+    items:
+      items:
+        - description: Voltage in microvolts
+        - description: GPIO group state value
 
   startup-delay-us:
     description: startup time in microseconds
@@ -81,12 +79,11 @@ properties:
 
   regulator-type:
     description: Specifies what is being regulated.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
-      - enum:
-          - voltage
-          - current
-        default: voltage
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - voltage
+      - current
+    default: voltage
 
 required:
   - compatible
Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +14 -17
index a682af0dc67e..e5422eaf851d 100644
@@ -21,17 +21,17 @@ properties:
 
   regulators:
     type: object
-    allOf:
-      - $ref: regulator.yaml#
+    $ref: regulator.yaml#
+
     description: |
       list of regulators provided by this controller, must be named
       after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
 
     properties:
       mps,switch-freq:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint8"
-        enum: [ 0, 1, 2, 3 ]
+        $ref: "/schemas/types.yaml#/definitions/uint8"
+
+        enum: [0, 1, 2, 3]
         default: 2
         description: |
           switching frequency must be one of following corresponding value
@@ -40,32 +40,29 @@ properties:
     patternProperties:
       "^ldo[1-4]$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
       "^ldortc$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
       "^buck[1-4]$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
         properties:
           mps,buck-softstart:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint8"
-            enum: [ 0, 1, 2, 3 ]
+            $ref: "/schemas/types.yaml#/definitions/uint8"
+
+            enum: [0, 1, 2, 3]
             description: |
               defines the soft start time of this buck, must be one of the following
               corresponding values 150us, 300us, 610us, 920us
 
           mps,buck-phase-delay:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint8"
-            enum: [ 0, 1, 2, 3 ]
+            $ref: "/schemas/types.yaml#/definitions/uint8"
+
+            enum: [0, 1, 2, 3]
             description: |
               defines the phase delay of this buck, must be one of the following
               corresponding values 0deg, 90deg, 180deg, 270deg
Documentation/devicetree/bindings/regulator/regulator.yaml +2 -3
index 91a39a33000b..ec505dbbf87c 100644
@@ -123,9 +123,8 @@ properties:
       0: Disable active discharge.
       1: Enable active discharge.
       Absence of this property will leave configuration to default.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - enum: [ 0, 1 ]
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [0, 1]
 
   regulator-coupled-with:
     description: Regulators with which the regulator is coupled. The linkage
Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +14 -20
index 71ce032b8cf8..ac74e214b050 100644
@@ -24,10 +24,9 @@ description: |
 patternProperties:
   "^LDO[1-7]$":
     type: object
-    allOf:
-      - $ref: regulator.yaml#
     description:
       Properties for single LDO regulator.
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -37,10 +36,9 @@ patternProperties:
 
   "^BUCK[1-7]$":
     type: object
-    allOf:
-      - $ref: regulator.yaml#
     description:
       Properties for single BUCK regulator.
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -49,40 +47,36 @@ patternProperties:
           should be "buck1", ..., "buck7"
 
       rohm,dvs-run-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "RUN" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-idle-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "IDLE" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-suspend-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "SUSPEND" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-lpsr-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "LPSR" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
         # Supported default DVS states:
         #     buck       |    run     |   idle    | suspend  | lpsr
Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +1 -2
index 64f1183ce841..cb336b2c16af 100644
@@ -23,8 +23,7 @@ properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: phandle to system configuration controller.
 
   vdda-supply:
Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +1 -2
index 8d8f38fe85dc..e6322bc3e447 100644
@@ -26,8 +26,7 @@ patternProperties:
   "^(reg11|reg18|usb33)$":
     type: object
 
-    allOf:
-      - $ref: "regulator.yaml#"
+    $ref: "regulator.yaml#"
 
 required:
   - compatible
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +3 -6
index 4ff4d3df0a06..4ffa25268fcc 100644
@@ -28,22 +28,20 @@ properties:
     maxItems: 1
 
   st,syscfg-holdboot:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: remote processor reset hold boot
       - Phandle of syscon block.
       - The offset of the hold boot setting register.
       - The field mask of the hold boot.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     maxItems: 1
 
   st,syscfg-tz:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description:
       Reference to the system configuration which holds the RCC trust zone mode
       - Phandle of syscon block.
       - The offset of the RCC trust zone mode register.
       - The field mask of the RCC trust zone mode.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     maxItems: 1
 
   interrupts:
@@ -90,8 +88,7 @@ properties:
       (see ../reserved-memory/reserved-memory.txt)
 
   st,syscfg-pdds:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the system configuration which holds the remote
         1st cell: phandle to syscon block
Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +1 -2
index 8ac437282659..6b2d56cc3f38 100644
@@ -21,8 +21,7 @@ properties:
 
   intel,global-reset:
     description: Global reset register offset and bit offset.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       - description: Register offset
       - description: Register bit offset
Documentation/devicetree/bindings/riscv/cpus.yaml +9 -11
index 04819ad379c2..f80ba2c66f71 100644
@@ -40,24 +40,18 @@ properties:
       and identifies the type of the hart.
 
   mmu-type:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/string"
-      - enum:
-          - riscv,sv32
-          - riscv,sv39
-          - riscv,sv48
     description:
       Identifies the MMU address translation mode used on this
       hart.  These values originate from the RISC-V Privileged
       Specification document, available from
       https://riscv.org/specifications/
+    $ref: "/schemas/types.yaml#/definitions/string"
+    enum:
+      - riscv,sv32
+      - riscv,sv39
+      - riscv,sv48
 
   riscv,isa:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/string"
-      - enum:
-          - rv64imac
-          - rv64imafdc
     description:
       Identifies the specific RISC-V instruction set architecture
       supported by the hart.  These are documented in the RISC-V
@@ -67,6 +61,10 @@ properties:
       While the isa strings in ISA specification are case
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
+    $ref: "/schemas/types.yaml#/definitions/string"
+    enum:
+      - rv64imac
+      - rv64imafdc
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +4 -5
index 57b087574aa1..5456604b1c14 100644
@@ -32,11 +32,10 @@ properties:
     maxItems: 1
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-      - items:
-          minItems: 3
-          maxItems: 3
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      minItems: 3
+      maxItems: 3
     description: |
       Phandle/offset/mask triplet. The phandle to pwrcfg used to
       access control register at offset, and change the dbp (Disable Backup
Documentation/devicetree/bindings/serial/pl011.yaml +4 -6
index 1a64d59152aa..c23c93b400f0 100644
@@ -88,17 +88,15 @@ properties:
     description:
       Rate at which poll occurs when auto-poll is set.
       default 100ms.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 100
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
 
   poll-timeout-ms:
     description:
       Poll timeout when auto-poll is set, default
       3000ms.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 3000
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3000
 
 required:
   - compatible
Documentation/devicetree/bindings/serial/rs485.yaml +12 -14
index 2b8261ea6d9c..8141e4aad530 100644
@@ -16,20 +16,18 @@ maintainers:
 properties:
   rs485-rts-delay:
     description: prop-encoded-array <a b>
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          items:
-            - description:
-                Delay between rts signal and beginning of data sent in milliseconds.
-                It corresponds to the delay before sending data.
-              default: 0
-              maximum: 1000
-            - description:
-                Delay between end of data sent and rts signal in milliseconds.
-                It corresponds to the delay after sending data and actual release of the line.
-              default: 0
-              maximum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      items:
+        - description: Delay between rts signal and beginning of data sent in
+            milliseconds. It corresponds to the delay before sending data.
+          default: 0
+          maximum: 1000
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/serial/samsung_uart.yaml +2 -3
index 9d2ce347875b..ff2f49fe322c 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/sound/adi,adau7118.yaml +9 -11
index 76ee695097bf..fb78967ee17b 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +20 -21
index ea1d2efb2aaa..98938db56285 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +1 -2
index a495d5fc0d23..e8f716b5f875 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +19 -23
index b6c1dd2a9c5e..c8f0985a8738 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/spi/spi-controller.yaml +6 -8
index d8e5509a7081..c6a2f543648b 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/spi/spi-pl022.yaml +24 -31
index 22ba4e90655b..22999024477f 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/spi/spi-sifive.yaml +6 -8
index 140e4351a19f..28040598bfae 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +3 -4
index 2ddd39d96766..d7be931b42d2 100644

Lines of this file are not shown. View the raw message.

Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +3 -5
index 6ff718ede184..d83a1f97f911 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

2.20.1

Signature · 7 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Part of the diff is not shown here. View the raw message.

maintainer Acked-by on v1 2/2
#11 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 11 lines · On Wed, 15 Apr 2020 19:55:49 -0500 Rob Herring <[email protected]> wrote:

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

A few unrelated white space changes in enums in the IIO chunks.

Don't suppose they matter but maybe need the description to mention there may be some minor formatting changes as well in some cases.

Quoted 25 lines
---
 .../devicetree/bindings/arm/cpus.yaml         |  81 +++---
 .../devicetree/bindings/arm/l2c2x0.yaml       |  87 +++---
 .../devicetree/bindings/arm/psci.yaml         |  15 +-
 .../bindings/arm/samsung/exynos-chipid.yaml   |   5 +-
 .../bus/allwinner,sun50i-a64-de2.yaml         |   5 +-
 .../bindings/clock/fixed-factor-clock.yaml    |   5 +-
 .../bindings/connector/usb-connector.yaml     |  28 +-
 .../bindings/crypto/st,stm32-hash.yaml        |   9 +-
 .../allwinner,sun4i-a10-display-engine.yaml   |   7 +-
 .../display/allwinner,sun4i-a10-tcon.yaml     |   5 +-
 .../bindings/display/panel/panel-common.yaml  |   5 +-
 .../devicetree/bindings/dma/dma-common.yaml   |   3 +-
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  18 +-
 .../devicetree/bindings/eeprom/at24.yaml      |  11 +-
 .../devicetree/bindings/example-schema.yaml   |  17 +-
 .../bindings/hwmon/adi,ltc2947.yaml           |  32 +--
 .../devicetree/bindings/hwmon/ti,tmp513.yaml  |  21 +-
 .../devicetree/bindings/i2c/st,stm32-i2c.yaml |   9 +-
 .../bindings/iio/adc/adi,ad7124.yaml          |   5 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |   3 +-
 .../bindings/iio/adc/microchip,mcp3911.yaml   |   7 +-
 .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml  |  31 +-
 .../bindings/iio/light/tsl2772.yaml           |  13 +-
 .../bindings/iio/temperature/adi,ltc2983.yaml |  56 ++--

...

Quoted 91 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -3
index 97087a45ce54..deb34deff0e8 100644
@@ -83,9 +83,8 @@ patternProperties:
           1: REFIN2(+)/REFIN2(−).
           3: AVDD
           If this field is left empty, internal reference is selected.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 3]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
 
       diff-channels:
         description: see Documentation/devicetree/bindings/iio/adc/adc.txt
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +1 -2
index 97f521d654ea..6a991e9f78e2 100644
@@ -18,8 +18,7 @@ properties:
 
   vref-supply:
     description: phandle to an external regulator providing the reference voltage
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   reg:
     description: spi chipselect number according to the usual spi bindings
Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +3 -4
index 8ffeceb6abae..95ab285f4eba 100644
@@ -38,10 +38,9 @@ properties:
 
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
 
   vref-supply:
     description: |
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +9 -12
index b1627441a0b2..d69ca492d020 100644
@@ -95,16 +95,14 @@ patternProperties:
           On stm32h7 and stm32mp1:
           - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
           - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string-array
+        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |
@@ -112,11 +110,10 @@ patternProperties:
           - 0: FastSinC
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - items:
-              minimum: 0
-              maximum: 5
+        $ref: /schemas/types.yaml#/definitions/uint32
+        items:
+          minimum: 0
+          maximum: 5
 
       "#io-channel-cells":
         const: 1

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml patternProperties: · line 129

Quoted 7 lines
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +1 -3
@@ -129,9 +126,8 @@ patternProperties:
           - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
           - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
         items:
-          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+          enum: [SPI_R, SPI_F, MANCH_R, MANCH_F]

I don't suppose it matters much but unrelated change.

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml patternProperties: · line 144

Quoted 9 lines
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +1 -1
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-channel-clk-src:
         description: |
@@ -141,9 +137,8 @@ patternProperties:
           - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
           - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
         items:
-          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]

Unrelated change.

Quoted 224 lines
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +2 -2
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+          enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-alt-channel:
         description:
Documentation/devicetree/bindings/iio/light/tsl2772.yaml +6 -7
index e8f7d1ada57b..d81229857944 100644
@@ -33,13 +33,12 @@ properties:
 
   amstaos,proximity-diodes:
     description: Proximity diodes to enable
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 2
-        items:
-          minimum: 0
-          maximum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
 
   interrupts:
     maxItems: 1
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +21 -35
index 8fb46de6641d..9480ede59c37 100644
@@ -42,10 +42,9 @@ properties:
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
 
   '#address-cells':
     const: 1
@@ -91,8 +90,7 @@ patternProperties:
           7 - Type T Thermocouple
           8 - Type B Thermocouple
           9 - Custom Thermocouple
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 1
         maximum: 9
 
@@ -121,8 +119,7 @@ patternProperties:
           more details look at table 69 and 70.
           Note should be signed, but dtc doesn't currently maintain the
           sign.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
@@ -138,8 +135,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a diode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
@@ -196,8 +192,7 @@ patternProperties:
           16 - RTD PT-1000 (0.00375)
           17 - RTD NI-120
           18 - RTD Custom
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 10
         maximum: 18
 
@@ -210,9 +205,8 @@ patternProperties:
         description:
           Identifies the number of wires used by the RTD. Setting this
           property to 5 means 4 wires with Kelvin Rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [2, 3, 4, 5]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 3, 4, 5]
 
       adi,rsense-share:
         description:
@@ -237,18 +231,16 @@ patternProperties:
         description:
           This property set the RTD curve used and the corresponding
           Callendar-VanDusen constants. Look at table 30 of the datasheet.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 0
-            maximum: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
 
       adi,custom-rtd:
         description:
           This is a table, where each entry should be a pair of
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK. For more details values look at table 74 and 75.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         items:
           minItems: 3
           maxItems: 64
@@ -280,8 +272,7 @@ patternProperties:
           25 - Thermistor Spectrum 1003k 1kohm
           26 - Thermistor Custom Steinhart-Hart
           27 - Custom Thermistor
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 19
         maximum: 27
 
@@ -314,10 +305,9 @@ patternProperties:
           This property controls the magnitude of the excitation current
           applied to the thermistor. Value 0 set's the sensor in auto-range
           mode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
-                   250000, 500000, 1000000]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
+          500000, 1000000]
 
       adi,custom-thermistor:
         description:
@@ -325,8 +315,7 @@ patternProperties:
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK only for custom thermistors. For more details look at table
           78 and 79.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
@@ -339,8 +328,7 @@ patternProperties:
           be programmed into the device memory using this property. For
           Steinhart sensors the coefficients are given in the raw
           format. Look at table 82 for more information.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
           minItems: 6
           maxItems: 6
@@ -358,8 +346,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a direct adc.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
@@ -379,8 +366,7 @@ patternProperties:
 
       adi,sensor-type:
         description: Identifies the sensor as a rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms:
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -3
index 512a6af5aa42..cffd02028d02 100644
@@ -42,9 +42,8 @@ patternProperties:
         description: Keycode to emit
 
       channel:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
         description: ADC Channel this key is attached to
 
       voltage:
Documentation/devicetree/bindings/input/input.yaml +4 -5
index 6d519046b3af..8edcb3c31270 100644
@@ -18,11 +18,10 @@ properties:
     description:
       Specifies an array of numeric keycode values to be used for reporting
       button presses.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minimum: 0
-          maximum: 0xff
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minimum: 0
+      maximum: 0xff
 
   poll-interval:
     description: Poll interval time in milliseconds.

...

maintainer Reviewed-by on v1 2/2
#12 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring

Quoting Rob Herring (2020-04-15 17:55:49)

Quoted 7 lines

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

Quoted 6 lines

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

---
 .../bindings/clock/fixed-factor-clock.yaml    |   5 +-
Acked-by on v1 2/2
#13 lore raw

Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'

In reply to Rob Herring
Quoted 11 lines · Rob Herring

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

Same preamble for my ack as in patch 1:

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Acked-by on v1 1/2
#15 lore raw
In reply to Rob Herring
Quoted 55 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

---
 .../devicetree/bindings/arm/altera.yaml       |  6 +-
 .../amlogic/amlogic,meson-gx-ao-secure.yaml   |  2 +-
 .../devicetree/bindings/arm/bitmain.yaml      |  2 +-
 .../devicetree/bindings/arm/nxp/lpc32xx.yaml  |  9 ++-
 .../bindings/arm/socionext/uniphier.yaml      | 26 ++++----
 .../bindings/arm/stm32/st,mlahb.yaml          |  2 +-
 .../bindings/arm/stm32/st,stm32-syscon.yaml   |  6 +-
 .../bindings/ata/faraday,ftide010.yaml        |  4 +-
 .../bindings/bus/allwinner,sun8i-a23-rsb.yaml |  4 +-
 .../clock/allwinner,sun4i-a10-gates-clk.yaml  |  8 +--
 .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++--
 .../devicetree/bindings/clock/qcom,mmcc.yaml  | 16 ++---
 .../bindings/connector/usb-connector.yaml     |  6 +-
 .../crypto/allwinner,sun4i-a10-crypto.yaml    | 14 ++--
 .../bindings/crypto/allwinner,sun8i-ce.yaml   | 16 ++---
 .../bindings/crypto/amlogic,gxl-crypto.yaml   |  2 +-
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 40 ++++++------
 .../display/allwinner,sun4i-a10-tcon.yaml     | 58 ++++++++---------
 .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++----
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +--
 .../bindings/display/bridge/lvds-codec.yaml   | 18 +++---
 .../display/panel/sony,acx424akp.yaml         |  2 +-
 .../display/panel/xinpeng,xpp055c272.yaml     |  4 +-
 .../bindings/display/renesas,cmm.yaml         | 16 ++---
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  8 +--
 .../bindings/gpio/brcm,xgs-iproc-gpio.yaml    |  2 +-
 .../bindings/gpu/arm,mali-midgard.yaml        | 18 +++---
 .../devicetree/bindings/gpu/vivante,gc.yaml   |  2 +-
 .../devicetree/bindings/i2c/i2c-rk3x.yaml     | 10 +--
 .../bindings/iio/adc/adi,ad7124.yaml          |  4 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |  6 +-
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |  4 +-
 .../bindings/input/touchscreen/goodix.yaml    |  2 +-
 .../bindings/interconnect/qcom,msm8916.yaml   |  4 +-
 .../bindings/interconnect/qcom,msm8974.yaml   |  4 +-
 .../bindings/interconnect/qcom,qcs404.yaml    |  4 +-
 .../allwinner,sun7i-a20-sc-nmi.yaml           | 12 ++--
 .../intel,ixp4xx-interrupt.yaml               |  8 +--
 .../interrupt-controller/st,stm32-exti.yaml   | 12 ++--
 .../bindings/iommu/samsung,sysmmu.yaml        | 10 +--
 .../bindings/mailbox/st,stm32-ipcc.yaml       |  2 +-
 .../media/allwinner,sun4i-a10-csi.yaml        | 28 ++++----
 .../bindings/media/amlogic,gx-vdec.yaml       | 14 ++--
 .../bindings/media/renesas,ceu.yaml           | 28 ++++----
 .../bindings/media/renesas,vin.yaml           |  8 +--
 .../devicetree/bindings/media/ti,vpe.yaml     |  2 +-
 .../memory-controllers/fsl/imx8m-ddrc.yaml    |  6 +-
Quoted 3 lines
 .../bindings/mfd/st,stm32-lptimer.yaml        |  4 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  4 +-
 .../devicetree/bindings/mfd/syscon.yaml       | 12 ++--
Quoted 28 lines
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  2 +-
 .../bindings/mmc/rockchip-dw-mshc.yaml        | 16 ++---
 .../bindings/mmc/socionext,uniphier-sd.yaml   | 14 ++--
 .../devicetree/bindings/mtd/denali,nand.yaml  |  4 +-
 .../net/allwinner,sun8i-a83t-emac.yaml        |  4 +-
 .../bindings/net/can/bosch,m_can.yaml         | 52 +++++++--------
 .../bindings/net/renesas,ether.yaml           |  4 +-
 .../bindings/net/ti,cpsw-switch.yaml          | 12 ++--
 .../bindings/net/ti,davinci-mdio.yaml         | 27 ++++----
 .../bindings/phy/intel,lgm-emmc-phy.yaml      |  2 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  | 16 ++---
 .../bindings/remoteproc/st,stm32-rproc.yaml   |  2 +-
 .../reset/brcm,bcm7216-pcie-sata-rescal.yaml  |  4 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------
 .../bindings/serial/amlogic,meson-uart.yaml   | 16 ++---
 .../devicetree/bindings/serial/rs485.yaml     | 17 ++---
 .../bindings/soc/amlogic/amlogic,canvas.yaml  | 10 +--
 .../bindings/sound/renesas,fsi.yaml           | 16 ++---
 .../bindings/spi/qcom,spi-qcom-qspi.yaml      | 10 +--
 .../devicetree/bindings/spi/renesas,hspi.yaml |  4 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  2 +-
 .../bindings/spi/st,stm32-qspi.yaml           |  4 +-
 .../allwinner,sun4i-a10-system-control.yaml   | 64 +++++++++----------
 .../bindings/thermal/amlogic,thermal.yaml     | 10 +--
 .../bindings/timer/arm,arch_timer.yaml        |  4 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |  4 +-
 .../devicetree/bindings/usb/dwc2.yaml         |  8 +--
 77 files changed, 450 insertions(+), 450 deletions(-)
Signature · 8 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Acked-by on v1 1/2
#16 lore raw
In reply to Rob Herring
Quoted 6 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

maintainer Acked-by on v1 1/2
#17 lore raw
In reply to Rob Herring
Quoted 24 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

---
 .../devicetree/bindings/arm/altera.yaml       |  6 +-
 .../amlogic/amlogic,meson-gx-ao-secure.yaml   |  2 +-
 .../devicetree/bindings/arm/bitmain.yaml      |  2 +-
 .../devicetree/bindings/arm/nxp/lpc32xx.yaml  |  9 ++-
 .../bindings/arm/socionext/uniphier.yaml      | 26 ++++----
 .../bindings/arm/stm32/st,mlahb.yaml          |  2 +-
 .../bindings/arm/stm32/st,stm32-syscon.yaml   |  6 +-
 .../bindings/ata/faraday,ftide010.yaml        |  4 +-
 .../bindings/bus/allwinner,sun8i-a23-rsb.yaml |  4 +-
 .../clock/allwinner,sun4i-a10-gates-clk.yaml  |  8 +--
 .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++--
 .../devicetree/bindings/clock/qcom,mmcc.yaml  | 16 ++---
 .../bindings/connector/usb-connector.yaml     |  6 +-
 .../crypto/allwinner,sun4i-a10-crypto.yaml    | 14 ++--
 .../bindings/crypto/allwinner,sun8i-ce.yaml   | 16 ++---
 .../bindings/crypto/amlogic,gxl-crypto.yaml   |  2 +-
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 40 ++++++------
Quoted 8 lines
 .../display/allwinner,sun4i-a10-tcon.yaml     | 58 ++++++++---------
 .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++----
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +--
 .../bindings/display/bridge/lvds-codec.yaml   | 18 +++---
 .../display/panel/sony,acx424akp.yaml         |  2 +-
 .../display/panel/xinpeng,xpp055c272.yaml     |  4 +-
 .../bindings/display/renesas,cmm.yaml         | 16 ++---
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  8 +--
Signature · 1 line
~Vinod
maintainer Acked-by on v1 1/2
#18 lore raw
In reply to Rob Herring
Quoted 4 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

maintainer Acked-by on v1 1/2
#19 lore raw
In reply to Rob Herring
Quoted 6 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

Quoted 2,079 lines
---
 .../devicetree/bindings/arm/altera.yaml       |  6 +-
 .../amlogic/amlogic,meson-gx-ao-secure.yaml   |  2 +-
 .../devicetree/bindings/arm/bitmain.yaml      |  2 +-
 .../devicetree/bindings/arm/nxp/lpc32xx.yaml  |  9 ++-
 .../bindings/arm/socionext/uniphier.yaml      | 26 ++++----
 .../bindings/arm/stm32/st,mlahb.yaml          |  2 +-
 .../bindings/arm/stm32/st,stm32-syscon.yaml   |  6 +-
 .../bindings/ata/faraday,ftide010.yaml        |  4 +-
 .../bindings/bus/allwinner,sun8i-a23-rsb.yaml |  4 +-
 .../clock/allwinner,sun4i-a10-gates-clk.yaml  |  8 +--
 .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++--
 .../devicetree/bindings/clock/qcom,mmcc.yaml  | 16 ++---
 .../bindings/connector/usb-connector.yaml     |  6 +-
 .../crypto/allwinner,sun4i-a10-crypto.yaml    | 14 ++--
 .../bindings/crypto/allwinner,sun8i-ce.yaml   | 16 ++---
 .../bindings/crypto/amlogic,gxl-crypto.yaml   |  2 +-
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 40 ++++++------
 .../display/allwinner,sun4i-a10-tcon.yaml     | 58 ++++++++---------
 .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++----
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +--
 .../bindings/display/bridge/lvds-codec.yaml   | 18 +++---
 .../display/panel/sony,acx424akp.yaml         |  2 +-
 .../display/panel/xinpeng,xpp055c272.yaml     |  4 +-
 .../bindings/display/renesas,cmm.yaml         | 16 ++---
 .../devicetree/bindings/dma/ti/k3-udma.yaml   |  8 +--
 .../bindings/gpio/brcm,xgs-iproc-gpio.yaml    |  2 +-
 .../bindings/gpu/arm,mali-midgard.yaml        | 18 +++---
 .../devicetree/bindings/gpu/vivante,gc.yaml   |  2 +-
 .../devicetree/bindings/i2c/i2c-rk3x.yaml     | 10 +--
 .../bindings/iio/adc/adi,ad7124.yaml          |  4 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |  6 +-
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |  4 +-
 .../bindings/input/touchscreen/goodix.yaml    |  2 +-
 .../bindings/interconnect/qcom,msm8916.yaml   |  4 +-
 .../bindings/interconnect/qcom,msm8974.yaml   |  4 +-
 .../bindings/interconnect/qcom,qcs404.yaml    |  4 +-
 .../allwinner,sun7i-a20-sc-nmi.yaml           | 12 ++--
 .../intel,ixp4xx-interrupt.yaml               |  8 +--
 .../interrupt-controller/st,stm32-exti.yaml   | 12 ++--
 .../bindings/iommu/samsung,sysmmu.yaml        | 10 +--
 .../bindings/mailbox/st,stm32-ipcc.yaml       |  2 +-
 .../media/allwinner,sun4i-a10-csi.yaml        | 28 ++++----
 .../bindings/media/amlogic,gx-vdec.yaml       | 14 ++--
 .../bindings/media/renesas,ceu.yaml           | 28 ++++----
 .../bindings/media/renesas,vin.yaml           |  8 +--
 .../devicetree/bindings/media/ti,vpe.yaml     |  2 +-
 .../memory-controllers/fsl/imx8m-ddrc.yaml    |  6 +-
 .../bindings/mfd/st,stm32-lptimer.yaml        |  4 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  4 +-
 .../devicetree/bindings/mfd/syscon.yaml       | 12 ++--
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  2 +-
 .../bindings/mmc/rockchip-dw-mshc.yaml        | 16 ++---
 .../bindings/mmc/socionext,uniphier-sd.yaml   | 14 ++--
 .../devicetree/bindings/mtd/denali,nand.yaml  |  4 +-
 .../net/allwinner,sun8i-a83t-emac.yaml        |  4 +-
 .../bindings/net/can/bosch,m_can.yaml         | 52 +++++++--------
 .../bindings/net/renesas,ether.yaml           |  4 +-
 .../bindings/net/ti,cpsw-switch.yaml          | 12 ++--
 .../bindings/net/ti,davinci-mdio.yaml         | 27 ++++----
 .../bindings/phy/intel,lgm-emmc-phy.yaml      |  2 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  | 16 ++---
 .../bindings/remoteproc/st,stm32-rproc.yaml   |  2 +-
 .../reset/brcm,bcm7216-pcie-sata-rescal.yaml  |  4 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------
 .../bindings/serial/amlogic,meson-uart.yaml   | 16 ++---
 .../devicetree/bindings/serial/rs485.yaml     | 17 ++---
 .../bindings/soc/amlogic/amlogic,canvas.yaml  | 10 +--
 .../bindings/sound/renesas,fsi.yaml           | 16 ++---
 .../bindings/spi/qcom,spi-qcom-qspi.yaml      | 10 +--
 .../devicetree/bindings/spi/renesas,hspi.yaml |  4 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  2 +-
 .../bindings/spi/st,stm32-qspi.yaml           |  4 +-
 .../allwinner,sun4i-a10-system-control.yaml   | 64 +++++++++----------
 .../bindings/thermal/amlogic,thermal.yaml     | 10 +--
 .../bindings/timer/arm,arch_timer.yaml        |  4 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |  4 +-
 .../devicetree/bindings/usb/dwc2.yaml         |  8 +--
 77 files changed, 450 insertions(+), 450 deletions(-)
Documentation/devicetree/bindings/arm/altera.yaml +3 -3
index 49e0362ddc11..b388c5aa7984 100644
@@ -13,8 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
-        - altr,socfpga-arria10
+          - altr,socfpga-cyclone5
+          - altr,socfpga-arria5
+          - altr,socfpga-arria10
       - const: altr,socfpga
...
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1 -1
index 66213bd95e6e..6cc74523ebfd 100644
@@ -25,7 +25,7 @@ select:
 
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon
 
Documentation/devicetree/bindings/arm/bitmain.yaml +1 -1
index 0efdb4ac028e..5cd5b36cff2d 100644
@@ -13,6 +13,6 @@ properties:
   compatible:
     items:
       - enum:
-        - bitmain,sophon-edge
+          - bitmain,sophon-edge
       - const: bitmain,bm1880
...
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4 -5
index 07f39d3eee7e..f7f024910e71 100644
@@ -17,9 +17,8 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
-
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
...
Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +13 -13
index 65ad6d8a3c99..113f93b9ae55 100644
@@ -17,45 +17,45 @@ properties:
       - description: LD4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld4-ref
+              - socionext,uniphier-ld4-ref
           - const: socionext,uniphier-ld4
       - description: Pro4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pro4-ace
-            - socionext,uniphier-pro4-ref
-            - socionext,uniphier-pro4-sanji
+              - socionext,uniphier-pro4-ace
+              - socionext,uniphier-pro4-ref
+              - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
       - description: sLD8 SoC boards
         items:
           - enum:
-            - socionext,uniphier-sld8-ref
+              - socionext,uniphier-sld8-ref
           - const: socionext,uniphier-sld8
       - description: PXs2 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs2-gentil
-            - socionext,uniphier-pxs2-vodka
+              - socionext,uniphier-pxs2-gentil
+              - socionext,uniphier-pxs2-vodka
           - const: socionext,uniphier-pxs2
       - description: LD6b SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld6b-ref
+              - socionext,uniphier-ld6b-ref
           - const: socionext,uniphier-ld6b
       - description: LD11 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld11-global
-            - socionext,uniphier-ld11-ref
+              - socionext,uniphier-ld11-global
+              - socionext,uniphier-ld11-ref
           - const: socionext,uniphier-ld11
       - description: LD20 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld20-global
-            - socionext,uniphier-ld20-ref
+              - socionext,uniphier-ld20-global
+              - socionext,uniphier-ld20-ref
           - const: socionext,uniphier-ld20
       - description: PXs3 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs3-ref
+              - socionext,uniphier-pxs3-ref
           - const: socionext,uniphier-pxs3
Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +1 -1
index 55f7938c4826..9f276bc9efa0 100644
@@ -20,7 +20,7 @@ description: |
   [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +3 -3
index baff80197d5a..cf5db5e273f3 100644
@@ -14,9 +14,9 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32mp157-syscfg
-        - const: syscon
+          - enum:
+              - st,stm32mp157-syscfg
+          - const: syscon
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +2 -2
index bfc6357476fd..6451928dd2ce 100644
@@ -26,8 +26,8 @@ properties:
     oneOf:
       - const: faraday,ftide010
       - items:
-        - const: cortina,gemini-pata
-        - const: faraday,ftide010
+          - const: cortina,gemini-pata
+          - const: faraday,ftide010
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +2 -2
index 80973619342d..32d33b983d66 100644
@@ -21,8 +21,8 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a23-rsb
       - items:
-        - const: allwinner,sun8i-a83t-rsb
-        - const: allwinner,sun8i-a23-rsb
+          - const: allwinner,sun8i-a83t-rsb
+          - const: allwinner,sun8i-a23-rsb
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +4 -4
index ed1b2126a81b..9a37a357cb4e 100644
@@ -52,12 +52,12 @@ properties:
       - const: allwinner,sun4i-a10-dram-gates-clk
 
       - items:
-        - const: allwinner,sun5i-a13-dram-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
       - items:
-        - const: allwinner,sun8i-h3-apb0-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/clock/fsl,plldig.yaml +8 -9
index a203d5d498db..8141f22410dd 100644
@@ -28,15 +28,14 @@ properties:
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
-     minimum: 650000000
-     maximum: 1300000000
-     default: 1188000000
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
 
 required:
   - compatible
Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +8 -8
index f684fe67db84..acc31b3991bd 100644
@@ -15,15 +15,15 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,mmcc-apq8064
-       - qcom,mmcc-apq8084
-       - qcom,mmcc-msm8660
-       - qcom,mmcc-msm8960
-       - qcom,mmcc-msm8974
-       - qcom,mmcc-msm8996
-       - qcom,mmcc-msm8998
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
 
   clocks:
     items:
Documentation/devicetree/bindings/connector/usb-connector.yaml +3 -3
index 4638d7adb806..369c58e22a06 100644
@@ -144,7 +144,7 @@ required:
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
-  - |+
+  - |
     muic-max77843 {
       usb_con1: connector {
         compatible = "usb-b-connector";
@@ -156,7 +156,7 @@ examples:
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
   # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-  - |+
+  - |
     ccic: s2mm005 {
       usb_con2: connector {
         compatible = "usb-c-connector";
@@ -190,7 +190,7 @@ examples:
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
   # power delivery support and enables drp.
-  - |+
+  - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
       usb_con3: connector {
Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +7 -7
index 8b9a8f337f16..fc823572bcff 100644
@@ -15,16 +15,16 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun5i-a13-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun5i-a13-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun6i-a31-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun6i-a31-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun7i-a20-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun7i-a20-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun8i-a33-crypto
+          - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +8 -8
index 2c459b8c76ff..7a60d84289cc 100644
@@ -50,16 +50,16 @@ if:
         const: allwinner,sun50i-h6-crypto
 then:
   properties:
-      clocks:
-        minItems: 3
-      clock-names:
-        minItems: 3
+    clocks:
+      minItems: 3
+    clock-names:
+      minItems: 3
 else:
   properties:
-      clocks:
-        maxItems: 2
-      clock-names:
-        maxItems: 2
+    clocks:
+      maxItems: 2
+    clock-names:
+      maxItems: 2
 
 required:
   - compatible
Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +1 -1
index 5becc60a0e28..385b23d255c3 100644
@@ -12,7 +12,7 @@ maintainers:
 properties:
   compatible:
     items:
-    - const: amlogic,gxl-crypto
+      - const: amlogic,gxl-crypto
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +20 -20
index 5d4915aed1e2..75e6479397a5 100644
@@ -21,8 +21,8 @@ properties:
       - const: allwinner,sun5i-a10s-hdmi
       - const: allwinner,sun6i-a31-hdmi
       - items:
-        - const: allwinner,sun7i-a20-hdmi
-        - const: allwinner,sun5i-a10s-hdmi
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
 
   reg:
     maxItems: 1
@@ -33,32 +33,32 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
 
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The HDMI DDC clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
 
   clock-names:
     oneOf:
       - items:
-        - const: ahb
-        - const: mod
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
 
       - items:
-        - const: ahb
-        - const: mod
-        - const: ddc
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
 
   resets:
     maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +29 -29
index e5344c4ae226..87cb77b32ee3 100644
@@ -35,26 +35,26 @@ properties:
       - const: allwinner,sun9i-a80-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun7i-a20-tcon0
-          - allwinner,sun7i-a20-tcon1
-        - const: allwinner,sun7i-a20-tcon
+          - enum:
+              - allwinner,sun7i-a20-tcon0
+              - allwinner,sun7i-a20-tcon1
+          - const: allwinner,sun7i-a20-tcon
 
       - items:
-        - enum:
-            - allwinner,sun50i-a64-tcon-lcd
-        - const: allwinner,sun8i-a83t-tcon-lcd
+          - enum:
+              - allwinner,sun50i-a64-tcon-lcd
+          - const: allwinner,sun8i-a83t-tcon-lcd
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-tcon-tv
-          - allwinner,sun50i-a64-tcon-tv
-        - const: allwinner,sun8i-a83t-tcon-tv
+          - enum:
+              - allwinner,sun8i-h3-tcon-tv
+              - allwinner,sun50i-a64-tcon-tv
+          - const: allwinner,sun8i-a83t-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun50i-h6-tcon-tv
-        - const: allwinner,sun8i-r40-tcon-tv
+          - enum:
+              - allwinner,sun50i-h6-tcon-tv
+          - const: allwinner,sun8i-r40-tcon-tv
 
   reg:
     maxItems: 1
@@ -83,37 +83,37 @@ properties:
   resets:
     anyOf:
       - items:
-        - description: TCON Reset Line
+          - description: TCON Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON LVDS Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+          - description: TCON LVDS Reset Line
 
   reset-names:
     oneOf:
       - const: lcd
 
       - items:
-        - const: lcd
-        - const: lvds
+          - const: lcd
+          - const: lvds
 
       - items:
-        - const: lcd
-        - const: edp
+          - const: lcd
+          - const: edp
 
       - items:
-        - const: lcd
-        - const: edp
-        - const: lvds
+          - const: lcd
+          - const: edp
+          - const: lvds
 
   ports:
     type: object
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +14 -14
index 9e90c2b00960..eed05b26cdf3 100644
@@ -76,28 +76,28 @@ required:
 allOf:
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun6i-a31-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 2
+      properties:
+        clocks:
+          minItems: 2
 
-        required:
-          - clock-names
+      required:
+        - clock-names
 
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun50i-a64-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun50i-a64-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 1
+      properties:
+        clocks:
+          minItems: 1
 
 additionalProperties: false
 
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +5 -5
index 4d6795690ac3..fa4769a0b26e 100644
@@ -29,11 +29,11 @@ properties:
       - const: allwinner,sun50i-h6-dw-hdmi
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-dw-hdmi
-          - allwinner,sun8i-r40-dw-hdmi
-          - allwinner,sun50i-a64-dw-hdmi
-        - const: allwinner,sun8i-a83t-dw-hdmi
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +9 -9
index 8f373029f5d2..e737951f5873 100644
@@ -32,17 +32,17 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
-          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
-          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
-        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
-        - enum:
-          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
-        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+          - enum:
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
-        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
     type: object
Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +1 -1
index 185dcc8fd1f9..78d060097052 100644
@@ -18,7 +18,7 @@ properties:
   reg: true
   reset-gpios: true
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   enforce-video-mode: true
 
 required:
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +2 -2
index d9fdb58e06b4..891de2256d22 100644
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
Documentation/devicetree/bindings/display/renesas,cmm.yaml +8 -8
index a57037b9e9ba..005406c89507 100644
@@ -21,15 +21,15 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - renesas,r8a7795-cmm
-          - renesas,r8a7796-cmm
-          - renesas,r8a77965-cmm
-          - renesas,r8a77990-cmm
-          - renesas,r8a77995-cmm
-        - const: renesas,rcar-gen3-cmm
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
       - items:
-        - const: renesas,rcar-gen2-cmm
+          - const: renesas,rcar-gen2-cmm
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +4 -4
index 39ea05e6e5ff..85056982a242 100644
@@ -69,10 +69,10 @@ properties:
     maxItems: 3
 
   reg-names:
-   items:
-     - const: gcfg
-     - const: rchanrt
-     - const: tchanrt
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
 
   msi-parent: true
 
Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +1 -1
index 5f1ed20e43ee..4f2cbd8307a7 100644
@@ -27,7 +27,7 @@ properties:
   gpio-controller: true
 
   '#gpio-cells':
-      const: 2
+    const: 2
 
   ngpios:
     minimum: 0
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +9 -9
index 0407e45eb8c4..a7a67e0a42e5 100644
@@ -16,33 +16,33 @@ properties:
     oneOf:
       - items:
           - enum:
-             - samsung,exynos5250-mali
+              - samsung,exynos5250-mali
           - const: arm,mali-t604
       - items:
           - enum:
-             - samsung,exynos5420-mali
+              - samsung,exynos5420-mali
           - const: arm,mali-t628
       - items:
           - enum:
-             - allwinner,sun50i-h6-mali
+              - allwinner,sun50i-h6-mali
           - const: arm,mali-t720
       - items:
           - enum:
-             - amlogic,meson-gxm-mali
-             - realtek,rtd1295-mali
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
           - const: arm,mali-t820
       - items:
           - enum:
-             - arm,juno-mali
+              - arm,juno-mali
           - const: arm,mali-t624
       - items:
           - enum:
-             - rockchip,rk3288-mali
-             - samsung,exynos5433-mali
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
           - const: arm,mali-t760
       - items:
           - enum:
-             - rockchip,rk3399-mali
+              - rockchip,rk3399-mali
           - const: arm,mali-t860
 
           # "arm,mali-t830"
Documentation/devicetree/bindings/gpu/vivante,gc.yaml +1 -1
index 0bc4b38d5cbb..e1ac6ff5a230 100644
@@ -9,7 +9,7 @@ title: Vivante GPU Bindings
 description: Vivante GPU core devices
 
 maintainers:
-  -  Lucas Stach <[email protected]>
+  - Lucas Stach <[email protected]>
 
 properties:
   compatible:
Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +5 -5
index 61eac76c84c4..790aa7218ee0 100644
@@ -28,14 +28,14 @@ properties:
       - const: rockchip,rk3399-i2c
       - items:
           - enum:
-            - rockchip,rk3036-i2c
-            - rockchip,rk3368-i2c
+              - rockchip,rk3036-i2c
+              - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
           - enum:
-            - rockchip,px30-i2c
-            - rockchip,rk3308-i2c
-            - rockchip,rk3328-i2c
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -2
index f0934b295edc..97087a45ce54 100644
@@ -72,8 +72,8 @@ patternProperties:
           The channel number. It can have up to 8 channels on ad7124-4
           and 16 channels on ad7124-8, numbered from 0 to 15.
         items:
-         minimum: 0
-         maximum: 15
+          minimum: 0
+          maximum: 15
 
       adi,reference-select:
         description: |
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +3 -3
index 118809a03279..97f521d654ea 100644
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology / Analog Devices LTC2496 ADC
 
 maintainers:
- - Lars-Peter Clausen <[email protected]>
- - Michael Hennerich <[email protected]>
- - Stefan Popa <[email protected]>
+  - Lars-Peter Clausen <[email protected]>
+  - Michael Hennerich <[email protected]>
+  - Stefan Popa <[email protected]>
 
 properties:
   compatible:
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -2
index 5b3b71c9c018..512a6af5aa42 100644
@@ -16,8 +16,8 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-        - const: allwinner,sun50i-a64-lradc
-        - const: allwinner,sun8i-a83t-r-lradc
+          - const: allwinner,sun50i-a64-lradc
+          - const: allwinner,sun8i-a83t-r-lradc
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1 -1
index c8ea9434c9cc..e81cfa56f25a 100644
@@ -63,7 +63,7 @@ required:
   - interrupts
 
 examples:
-- |
+  - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +2 -2
index 4107e60cab12..e1009ae4e8f7 100644
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <[email protected]>
 
 description: |
-   The Qualcomm MSM8916 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm MSM8916 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   compatible:
Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +2 -2
index 9af3c6e59cff..8004c4baf397 100644
@@ -10,8 +10,8 @@ maintainers:
   - Brian Masney <[email protected]>
 
 description: |
-   The Qualcomm MSM8974 interconnect providers support setting system
-   bandwidth requirements between various network-on-chip fabrics.
+  The Qualcomm MSM8974 interconnect providers support setting system
+  bandwidth requirements between various network-on-chip fabrics.
 
 properties:
   reg:
Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +2 -2
index 8d65c5f80679..3fbb8785fbc9 100644
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <[email protected]>
 
 description: |
-   The Qualcomm QCS404 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm QCS404 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   reg:
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +6 -6
index cf09055da78b..7cd6b8bacfa0 100644
@@ -27,15 +27,15 @@ properties:
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
       - items:
-        - const: allwinner,sun8i-a83t-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun8i-a83t-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - const: allwinner,sun9i-a80-sc-nmi
       - items:
-        - const: allwinner,sun50i-a64-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-a64-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - items:
-        - const: allwinner,sun50i-h6-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-h6-r-intc
+          - const: allwinner,sun6i-a31-r-intc
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +4 -4
index ccc507f384d2..14dced11877b 100644
@@ -25,10 +25,10 @@ properties:
   compatible:
     items:
       - enum:
-        - intel,ixp42x-interrupt
-        - intel,ixp43x-interrupt
-        - intel,ixp45x-interrupt
-        - intel,ixp46x-interrupt
+          - intel,ixp42x-interrupt
+          - intel,ixp43x-interrupt
+          - intel,ixp45x-interrupt
+          - intel,ixp46x-interrupt
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +6 -6
index 9e5c6608b4e3..2a5b29567926 100644
@@ -14,13 +14,13 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32-exti
-          - st,stm32h7-exti
+          - enum:
+              - st,stm32-exti
+              - st,stm32h7-exti
       - items:
-        - enum:
-          - st,stm32mp1-exti
-        - const: syscon
+          - enum:
+              - st,stm32mp1-exti
+          - const: syscon
 
   "#interrupt-cells":
     const: 2
Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +5 -5
index 0e33cd9e010e..af51b91c893e 100644
@@ -54,13 +54,13 @@ properties:
   clock-names:
     oneOf:
       - items:
-        - const: sysmmu
+          - const: sysmmu
       - items:
-        - const: sysmmu
-        - const: master
+          - const: sysmmu
+          - const: master
       - items:
-        - const: aclk
-        - const: pclk
+          - const: aclk
+          - const: pclk
 
   "#iommu-cells":
     const: 0
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +1 -1
index 5b13d6672996..db851541d619 100644
@@ -24,7 +24,7 @@ properties:
     maxItems: 1
 
   clocks:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
     items:
Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +14 -14
index 8453ee340b9f..09318830db47 100644
@@ -20,11 +20,11 @@ properties:
       - const: allwinner,sun4i-a10-csi1
       - const: allwinner,sun7i-a20-csi0
       - items:
-        - const: allwinner,sun7i-a20-csi1
-        - const: allwinner,sun4i-a10-csi1
+          - const: allwinner,sun7i-a20-csi1
+          - const: allwinner,sun4i-a10-csi1
       - items:
-        - const: allwinner,sun8i-r40-csi0
-        - const: allwinner,sun7i-a20-csi0
+          - const: allwinner,sun8i-r40-csi0
+          - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -35,24 +35,24 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The CSI interface clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI DRAM clock
 
       - items:
-        - description: The CSI interface clock
-        - description: The CSI ISP clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI ISP clock
+          - description: The CSI DRAM clock
 
   clock-names:
     oneOf:
       - items:
-        - const: bus
-        - const: ram
+          - const: bus
+          - const: ram
 
       - items:
-        - const: bus
-        - const: isp
-        - const: ram
+          - const: bus
+          - const: isp
+          - const: ram
 
   resets:
     maxItems: 1
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +7 -7
index 37d77e065491..5a1da4029c37 100644
@@ -29,14 +29,14 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,gxbb-vdec # GXBB (S905)
-          - amlogic,gxl-vdec # GXL (S905X, S905D)
-          - amlogic,gxm-vdec # GXM (S912)
-        - const: amlogic,gx-vdec
+          - enum:
+              - amlogic,gxbb-vdec # GXBB (S905)
+              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxm-vdec # GXM (S912)
+          - const: amlogic,gx-vdec
       - enum:
-        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
-        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+          - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+          - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
 
   interrupts:
     minItems: 2
Documentation/devicetree/bindings/media/renesas,ceu.yaml +14 -14
index fcb5f13704a5..f2393458814e 100644
@@ -32,23 +32,23 @@ properties:
     additionalProperties: false
 
     properties:
-       endpoint:
-         type: object
-         additionalProperties: false
+      endpoint:
+        type: object
+        additionalProperties: false
 
          # Properties described in
          # Documentation/devicetree/bindings/media/video-interfaces.txt
-         properties:
-           remote-endpoint: true
-           hsync-active: true
-           vsync-active: true
-           field-even-active: false
-           bus-width:
-             enum: [8, 16]
-             default: 8
-
-         required:
-           - remote-endpoint
+        properties:
+          remote-endpoint: true
+          hsync-active: true
+          vsync-active: true
+          field-even-active: false
+          bus-width:
+            enum: [8, 16]
+            default: 8
+
+        required:
+          - remote-endpoint
 
     required:
       - endpoint
Documentation/devicetree/bindings/media/renesas,vin.yaml +4 -4
index 1ec947b4781f..ecc09f1124d4 100644
@@ -261,13 +261,13 @@ properties:
 
         anyOf:
           - required:
-            - endpoint@0
+              - endpoint@0
           - required:
-            - endpoint@1
+              - endpoint@1
           - required:
-            - endpoint@2
+              - endpoint@2
           - required:
-            - endpoint@3
+              - endpoint@3
 
         additionalProperties: false
 
Documentation/devicetree/bindings/media/ti,vpe.yaml +1 -1
index f3a8a350e85f..ef473f287399 100644
@@ -17,7 +17,7 @@ description: |-
 
 properties:
   compatible:
-      const: ti,dra7-vpe
+    const: ti,dra7-vpe
 
   reg:
     items:
Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +3 -3
index c9e6c22cb5be..445e46feda69 100644
@@ -25,9 +25,9 @@ properties:
   compatible:
     items:
       - enum:
-        - fsl,imx8mn-ddrc
-        - fsl,imx8mm-ddrc
-        - fsl,imx8mq-ddrc
+          - fsl,imx8mn-ddrc
+          - fsl,imx8mm-ddrc
+          - fsl,imx8mq-ddrc
       - const: fsl,imx8m-ddrc
 
   reg:
Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +2 -2
index ddf190cb800b..e675611f80d0 100644
@@ -66,8 +66,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 2
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2 -2
index 590849ee9f32..4acda7ce3b44 100644
@@ -102,8 +102,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 16
+          minimum: 0
+          maximum: 16
 
     required:
       - compatible
Documentation/devicetree/bindings/mfd/syscon.yaml +6 -6
index 39375e4313d2..7a39486b215a 100644
@@ -33,13 +33,13 @@ properties:
   compatible:
     anyOf:
       - items:
-        - enum:
-          - allwinner,sun8i-a83t-system-controller
-          - allwinner,sun8i-h3-system-controller
-          - allwinner,sun8i-v3s-system-controller
-          - allwinner,sun50i-a64-system-controller
+          - enum:
+              - allwinner,sun8i-a83t-system-controller
+              - allwinner,sun8i-h3-system-controller
+              - allwinner,sun8i-v3s-system-controller
+              - allwinner,sun50i-a64-system-controller
 
-        - const: syscon
+          - const: syscon
 
       - contains:
           const: syscon
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +1 -1
index 2f45dd0d04db..d43a0c557a44 100644
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-         - socionext,uniphier-sd4hc
+          - socionext,uniphier-sd4hc
       - const: cdns,sd4hc
 
   reg:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +8 -8
index 89c3edd6a728..4ee3ed6efab4 100644
@@ -30,21 +30,21 @@ properties:
       - items:
           - enum:
             # for Rockchip PX30
-            - rockchip,px30-dw-mshc
+              - rockchip,px30-dw-mshc
             # for Rockchip RK3036
-            - rockchip,rk3036-dw-mshc
+              - rockchip,rk3036-dw-mshc
             # for Rockchip RK322x
-            - rockchip,rk3228-dw-mshc
+              - rockchip,rk3228-dw-mshc
             # for Rockchip RK3308
-            - rockchip,rk3308-dw-mshc
+              - rockchip,rk3308-dw-mshc
             # for Rockchip RK3328
-            - rockchip,rk3328-dw-mshc
+              - rockchip,rk3328-dw-mshc
             # for Rockchip RK3368
-            - rockchip,rk3368-dw-mshc
+              - rockchip,rk3368-dw-mshc
             # for Rockchip RK3399
-            - rockchip,rk3399-dw-mshc
+              - rockchip,rk3399-dw-mshc
             # for Rockchip RV1108
-            - rockchip,rv1108-dw-mshc
+              - rockchip,rv1108-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +7 -7
index cdfac9b4411b..8d6413f48823 100644
@@ -35,15 +35,15 @@ properties:
     oneOf:
       - const: host
       - items:
-        - const: host
-        - const: bridge
+          - const: host
+          - const: bridge
       - items:
-        - const: host
-        - const: hw
+          - const: host
+          - const: hw
       - items:
-        - const: host
-        - const: bridge
-        - const: hw
+          - const: host
+          - const: bridge
+          - const: hw
 
   resets:
     minItems: 1
Documentation/devicetree/bindings/mtd/denali,nand.yaml +2 -2
index 46e6b6726bc0..c07b91592cbd 100644
@@ -54,8 +54,8 @@ properties:
         reg:  register reset
     oneOf:
       - items:
-        - const: nand
-        - const: reg
+          - const: nand
+          - const: reg
       - const: nand
       - const: reg
 
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +2 -2
index db36b4d86484..c7c9ad4e3f9f 100644
@@ -19,8 +19,8 @@ properties:
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
-        - const: allwinner,sun50i-h6-emac
-        - const: allwinner,sun50i-a64-emac
+          - const: allwinner,sun50i-h6-emac
+          - const: allwinner,sun50i-a64-emac
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +26 -26
index cccf8202c8f7..7a784dc4e513 100644
@@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings
 description: Bosch MCAN controller for CAN bus
 
 maintainers:
-  -  Sriram Dash <[email protected]>
+  - Sriram Dash <[email protected]>
 
 properties:
   compatible:
@@ -51,31 +51,31 @@ properties:
 
   bosch,mram-cfg:
     description: |
-                 Message RAM configuration data.
-                 Multiple M_CAN instances can share the same Message RAM
-                 and each element(e.g Rx FIFO or Tx Buffer and etc) number
-                 in Message RAM is also configurable, so this property is
-                 telling driver how the shared or private Message RAM are
-                 used by this M_CAN controller.
-
-                 The format should be as follows:
-                 <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
-                 The 'offset' is an address offset of the Message RAM where
-                 the following elements start from. This is usually set to
-                 0x0 if you're using a private Message RAM. The remain cells
-                 are used to specify how many elements are used for each FIFO/Buffer.
-
-                 M_CAN includes the following elements according to user manual:
-                 11-bit Filter	0-128 elements / 0-128 words
-                 29-bit Filter	0-64 elements / 0-128 words
-                 Rx FIFO 0	0-64 elements / 0-1152 words
-                 Rx FIFO 1	0-64 elements / 0-1152 words
-                 Rx Buffers	0-64 elements / 0-1152 words
-                 Tx Event FIFO	0-32 elements / 0-64 words
-                 Tx Buffers	0-32 elements / 0-576 words
-
-                 Please refer to 2.4.1 Message RAM Configuration in Bosch
-                 M_CAN user manual for details.
+      Message RAM configuration data.
+      Multiple M_CAN instances can share the same Message RAM
+      and each element(e.g Rx FIFO or Tx Buffer and etc) number
+      in Message RAM is also configurable, so this property is
+      telling driver how the shared or private Message RAM are
+      used by this M_CAN controller.
+
+      The format should be as follows:
+      <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+      The 'offset' is an address offset of the Message RAM where
+      the following elements start from. This is usually set to
+      0x0 if you're using a private Message RAM. The remain cells
+      are used to specify how many elements are used for each FIFO/Buffer.
+
+      M_CAN includes the following elements according to user manual:
+      11-bit Filter	0-128 elements / 0-128 words
+      29-bit Filter	0-64 elements / 0-128 words
+      Rx FIFO 0	0-64 elements / 0-1152 words
+      Rx FIFO 1	0-64 elements / 0-1152 words
+      Rx Buffers	0-64 elements / 0-1152 words
+      Tx Event FIFO	0-32 elements / 0-64 words
+      Tx Buffers	0-32 elements / 0-576 words
+
+      Please refer to 2.4.1 Message RAM Configuration in Bosch
+      M_CAN user manual for details.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/int32-array
       - items:
Documentation/devicetree/bindings/net/renesas,ether.yaml +2 -2
index 7f84df9790e2..2eaa8799e002 100644
@@ -40,8 +40,8 @@ properties:
 
   reg:
     items:
-       - description: E-DMAC/feLic registers
-       - description: TSU registers
+      - description: E-DMAC/feLic registers
+      - description: TSU registers
     minItems: 1
 
   interrupts:
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +6 -6
index 976f139bb66e..8fc8d3be303b 100644
@@ -23,14 +23,14 @@ properties:
     oneOf:
       - const: ti,cpsw-switch
       - items:
-         - const: ti,am335x-cpsw-switch
-         - const: ti,cpsw-switch
+          - const: ti,am335x-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,am4372-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,am4372-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,dra7-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,dra7-cpsw-switch
+          - const: ti,cpsw-switch
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +13 -14
index 242ac4935a4b..2ea14ab29254 100644
@@ -18,25 +18,24 @@ allOf:
 properties:
   compatible:
     oneOf:
-       - const: ti,davinci_mdio
-       - items:
-         - const: ti,keystone_mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,am4372-mdio
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
+      - const: ti,davinci_mdio
+      - items:
+          - const: ti,keystone_mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,am4372-mdio
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
 
   reg:
     maxItems: 1
 
   bus_freq:
-      maximum: 2500000
-      description:
-        MDIO Bus frequency
+    maximum: 2500000
+    description: MDIO Bus frequency
 
   ti,hwmods:
     description: TI hwmod name
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +1 -1
index 9a346d6290d9..77bb5309918e 100644
@@ -23,7 +23,7 @@ description: |+
 
 properties:
   compatible:
-      const: intel,lgm-emmc-phy
+    const: intel,lgm-emmc-phy
 
   "#phy-cells":
     const: 0
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +8 -8
index ea7f32905172..4fe64f4dd594 100644
@@ -49,17 +49,17 @@ properties:
       are available.
     oneOf:
       - items:
-        - const: timers
+          - const: timers
       - items:
-        - const: timers
-        - const: pwm-tclk0
+          - const: timers
+          - const: pwm-tclk0
       - items:
-        - const: timers
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk1
       - items:
-        - const: timers
-        - const: pwm-tclk0
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk0
+          - const: pwm-tclk1
 
   interrupts:
     description:
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +1 -1
index c0d83865e933..4ff4d3df0a06 100644
@@ -25,7 +25,7 @@ properties:
     maxItems: 3
 
   resets:
-     maxItems: 1
+    maxItems: 1
 
   st,syscfg-holdboot:
     allOf:
Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +3 -1
index 512a33bdb208..dfce6738b033 100644
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: BCM7216 RESCAL reset controller
 
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
 
 maintainers:
   - Florian Fainelli <[email protected]>
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +19 -19
index 48c6cafca90c..57b087574aa1 100644
@@ -38,10 +38,10 @@ properties:
           minItems: 3
           maxItems: 3
     description: |
-       Phandle/offset/mask triplet. The phandle to pwrcfg used to
-       access control register at offset, and change the dbp (Disable Backup
-       Protection) bit represented by the mask, mandatory to disable/enable backup
-       domain (RTC registers) write protection.
+      Phandle/offset/mask triplet. The phandle to pwrcfg used to
+      access control register at offset, and change the dbp (Disable Backup
+      Protection) bit represented by the mask, mandatory to disable/enable backup
+      domain (RTC registers) write protection.
 
   assigned-clocks:
     description: |
@@ -78,14 +78,14 @@ allOf:
             const: st,stm32h7-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-       required:
-         - clock-names
-         - st,syscfg
+      required:
+        - clock-names
+        - st,syscfg
 
   - if:
       properties:
@@ -94,16 +94,16 @@ allOf:
             const: st,stm32mp1-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-         assigned-clocks: false
-         assigned-clock-parents: false
+        assigned-clocks: false
+        assigned-clock-parents: false
 
-       required:
-         - clock-names
+      required:
+        - clock-names
 
 required:
   - compatible
Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +8 -8
index d4178ab0d675..75ebc9952a99 100644
@@ -24,18 +24,18 @@ properties:
     oneOf:
       - description: Always-on power domain UART controller
         items:
-        - enum:
+          - enum:
+              - amlogic,meson6-uart
+              - amlogic,meson8-uart
+              - amlogic,meson8b-uart
+              - amlogic,meson-gx-uart
+          - const: amlogic,meson-ao-uart
+      - description: Everything-Else power domain UART controller
+        enum:
           - amlogic,meson6-uart
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
-        - const: amlogic,meson-ao-uart
-      - description: Everything-Else power domain UART controller
-        enum:
-        - amlogic,meson6-uart
-        - amlogic,meson8-uart
-        - amlogic,meson8b-uart
-        - amlogic,meson-gx-uart
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/serial/rs485.yaml +9 -8
index d4beaf11222d..2b8261ea6d9c 100644
@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
-  -  Rob Herring <[email protected]>
+  - Rob Herring <[email protected]>
 
 properties:
   rs485-rts-delay:
@@ -37,9 +36,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
 
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
-   description: enables the receiving of data even while sending data.
-   $ref: /schemas/types.yaml#/definitions/flag
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+...
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +5 -5
index cb008fd188d8..02b2d5ba01d6 100644
@@ -26,11 +26,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,meson8-canvas
-          - amlogic,meson8b-canvas
-          - amlogic,meson8m2-canvas
-        - const: amlogic,canvas
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
       - const: amlogic,canvas # GXBB and newer SoCs
 
   reg:
Documentation/devicetree/bindings/sound/renesas,fsi.yaml +8 -8
index d1b65554e681..91cf4176abd5 100644
@@ -17,16 +17,16 @@ properties:
     oneOf:
       # for FSI2 SoC
       - items:
-        - enum:
-          - renesas,fsi2-sh73a0
-          - renesas,fsi2-r8a7740
-        - enum:
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,fsi2-sh73a0
+              - renesas,fsi2-r8a7740
+          - enum:
+              - renesas,sh_fsi2
       # for Generic
       - items:
-        - enum:
-          - renesas,sh_fsi
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,sh_fsi
+              - renesas,sh_fsi2
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +5 -5
index 0cf470eaf2a0..406286149a6b 100644
@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
 maintainers:
- - Mukesh Savaliya <[email protected]>
- - Akash Asthana <[email protected]>
+  - Mukesh Savaliya <[email protected]>
+  - Akash Asthana <[email protected]>
 
-description:
- The QSPI controller allows SPI protocol communication in single, dual, or quad
- wire transmission modes for read/write access to slaves such as NOR flash.
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
 
 allOf:
   - $ref: /spi/spi-controller.yaml#
Documentation/devicetree/bindings/spi/renesas,hspi.yaml +2 -2
index c429cf4bea5b..f492cb9fea12 100644
@@ -16,8 +16,8 @@ properties:
   compatible:
     items:
       - enum:
-        - renesas,hspi-r8a7778 # R-Car M1A
-        - renesas,hspi-r8a7779 # R-Car H1
+          - renesas,hspi-r8a7778 # R-Car M1A
+          - renesas,hspi-r8a7779 # R-Car H1
       - const: renesas,hspi
 
   reg:
Documentation/devicetree/bindings/spi/spi-pl022.yaml +1 -1
index dfb697c69341..22ba4e90655b 100644
@@ -51,7 +51,7 @@ properties:
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
-               priority to minimise the transfer latency on the bus (boolean)
+      priority to minimise the transfer latency on the bus (boolean)
     type: boolean
 
   dmas:
Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +2 -2
index 3665a5fe6b7f..1a342ce1f798 100644
@@ -24,8 +24,8 @@ properties:
 
   reg-names:
     items:
-     - const: qspi
-     - const: qspi_mm
+      - const: qspi
+      - const: qspi_mm
 
   clocks:
     maxItems: 1
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +32 -32
index 4b5509436588..f5825935fd22 100644
@@ -29,8 +29,8 @@ properties:
       - const: allwinner,sun4i-a10-system-control
       - const: allwinner,sun5i-a13-system-control
       - items:
-        - const: allwinner,sun7i-a20-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,sun7i-a20-system-control
+          - const: allwinner,sun4i-a10-system-control
       - const: allwinner,sun8i-a23-system-control
       - const: allwinner,sun8i-h3-system-control
       - const: allwinner,sun50i-a64-sram-controller
@@ -38,11 +38,11 @@ properties:
       - const: allwinner,sun50i-a64-system-control
       - const: allwinner,sun50i-h5-system-control
       - items:
-        - const: allwinner,sun50i-h6-system-control
-        - const: allwinner,sun50i-a64-system-control
+          - const: allwinner,sun50i-h6-system-control
+          - const: allwinner,sun50i-a64-system-control
       - items:
-        - const: allwinner,suniv-f1c100s-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,suniv-f1c100s-system-control
+          - const: allwinner,sun4i-a10-system-control
 
   reg:
     maxItems: 1
@@ -69,44 +69,44 @@ patternProperties:
               - const: allwinner,sun4i-a10-sram-d
               - const: allwinner,sun50i-a64-sram-c
               - items:
-                - const: allwinner,sun5i-a13-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
+                  - const: allwinner,sun5i-a13-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun7i-a20-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
+                  - const: allwinner,sun7i-a20-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun5i-a13-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun5i-a13-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun7i-a20-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun7i-a20-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun8i-a23-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun8i-a23-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun8i-h3-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun8i-h3-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-a64-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-a64-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-h5-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-h5-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-h6-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-h6-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun5i-a13-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,sun5i-a13-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun7i-a20-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,sun7i-a20-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,suniv-f1c100s-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,suniv-f1c100s-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun50i-h6-sram-c
-                - const: allwinner,sun50i-a64-sram-c
+                  - const: allwinner,sun50i-h6-sram-c
+                  - const: allwinner,sun50i-a64-sram-c
 
 required:
   - "#address-cells"
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +5 -5
index e43ec50bda37..999c6b365f1d 100644
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal
 
 properties:
   compatible:
-      items:
-        - enum:
-            - amlogic,g12a-cpu-thermal
-            - amlogic,g12a-ddr-thermal
-        - const: amlogic,g12a-thermal
+    items:
+      - enum:
+          - amlogic,g12a-cpu-thermal
+          - amlogic,g12a-ddr-thermal
+      - const: amlogic,g12a-thermal
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +2 -2
index fa255672e8e5..135186f83925 100644
@@ -28,10 +28,10 @@ properties:
               - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv7-timer
+              - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv8-timer
+              - arm,armv8-timer
 
   interrupts:
     items:
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +2 -2
index 582bbef62b95..6ff718ede184 100644
@@ -20,7 +20,7 @@ properties:
   compatible:
     items:
       - enum:
-        - arm,armv7-timer-mem
+          - arm,armv7-timer-mem
 
   reg:
     maxItems: 1
@@ -77,7 +77,7 @@ patternProperties:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
         maxItems: 2
         items:
Documentation/devicetree/bindings/usb/dwc2.yaml +4 -5
index 0d6d850a7f17..fb2f62aef5fa 100644
@@ -62,14 +62,14 @@ properties:
 
   resets:
     items:
-     - description: common reset
-     - description: ecc reset
+      - description: common reset
+      - description: ecc reset
     minItems: 1
 
   reset-names:
     items:
-     - const: dwc2
-     - const: dwc2-ecc
+      - const: dwc2
+      - const: dwc2-ecc
     minItems: 1
 
   phys:
--

2.20.1

Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#20 lore raw
In reply to Rob Herring

Hi Rob.

Quoted 4 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

Are there any plans to improve the tooling so we get warnigns for this? Otherwise I am afraid we will see a lot of patches that gets this wrong.

As a follow-up patch it would be good if example-schema.yaml could gain some comments about the correct indentions.

Some comments in the following.

Quoted 5 lines
Documentation/devicetree/bindings/arm/altera.yaml +0 -0
index 49e0362ddc11..b388c5aa7984 100644

Documentation/devicetree/bindings/arm/altera.yaml properties: · line 19

Quoted 10 lines
Documentation/devicetree/bindings/arm/altera.yaml +3 -3
@@ -13,8 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
-        - altr,socfpga-arria10
+          - altr,socfpga-cyclone5
+          - altr,socfpga-arria5
+          - altr,socfpga-arria10
       - const: altr,socfpga

So here "- enum" do not need the extra indent.
Is it because this is not a list?

Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml select: · line 30

Quoted 13 lines
Documentation/devicetree/bindings/arm/altera.yaml +0 -0
...
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1 -1
index 66213bd95e6e..6cc74523ebfd 100644
@@ -25,7 +25,7 @@ select:
 
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon

This is something I had expected the tooling to notice.
I had expected the two "- const" to be indented with 4 spaces, not two. So there is something I do not understand.

Quoted 8 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +0 -0
index 07f39d3eee7e..f7f024910e71 100644
@@ -17,9 +17,8 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:

Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml properties: · line 23

Quoted 10 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4 -5
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
-
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
...

And here "- enum" receive extra indent.

I trust you know what you are doing - but I do not get it.

Some pointers or examples for the correct indention would be great. I cannot review this patch as long as I do not know the rules.

My request to update example-schema.yaml was one way to teach me. (Some people will say that is difficult/impossible to teach me, but thats another story:-) ).

Sam

author maintainer
#21 lore raw
Quoted 10 lines · Sam Ravnborg

Hi Rob.

Quoted 4 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

Are there any plans to improve the tooling so we get warnigns for this?

I've been experimenting with yamllint some. I haven't figured out how to best integrate it in. Probably need to start with something minimal and warning free for the tree and then add to it.

There's also yaml-format in the dtschema repo which just reads in and writes out a yaml file using ruamel round trip yaml parser. That's what I used here.

Quoted 4 lines

Otherwise I am afraid we will see a lot of patches that gets this wrong.

As a follow-up patch it would be good if example-schema.yaml could gain some comments about the correct indentions.

Sure, I can do that.

Quoted 13 lines

Some comments in the following.

Quoted 10 lines
Documentation/devicetree/bindings/arm/altera.yaml +0 -2
index 49e0362ddc11..b388c5aa7984 100644
@@ -13,8 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
Quoted 8 lines

Documentation/devicetree/bindings/arm/altera.yaml properties: · line 19

Quoted 5 lines
Documentation/devicetree/bindings/arm/altera.yaml +3 -1
-        - altr,socfpga-arria10
+          - altr,socfpga-cyclone5
+          - altr,socfpga-arria5
+          - altr,socfpga-arria10
       - const: altr,socfpga

So here "- enum" do not need the extra indent.
Is it because this is not a list?

Right. Indentation is 2 more spaces than the parent keyword ignoring any hyphen in the parent.

Quoted 6 lines
Quoted 6 lines
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +0 -0
index 66213bd95e6e..6cc74523ebfd 100644
@@ -25,7 +25,7 @@ select:
 
Quoted 10 lines

Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml select: · line 30

Quoted 6 lines
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1 -1
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon

This is something I had expected the tooling to notice.
I had expected the two "- const" to be indented with 4 spaces, not two. So there is something I do not understand.

As above, correct indenting is 2 spaces from the parent not counting any '-' in the parent, but the '-' counts for indenting the children.

Arguably, this style is inconsistent that sometimes the '-' counts and sometimes it doesn't. However, I think this style is better because it distinguishes lists vs. dicts more clearly. It's easy to miss the '-' when the indentation is the same:

- foo:
- bar
- baz

- foo:
bar
baz

Or worse:

- foo:
- bar
baz

Both styles are valid. It's just a tabs vs. spaces debate, and I just picked one.

Quoted 21 lines
Quoted 8 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +0 -0
index 07f39d3eee7e..f7f024910e71 100644
@@ -17,9 +17,8 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:

Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml properties: · line 23

Quoted 10 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4 -5
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
-
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
...

And here "- enum" receive extra indent.

Quoted 3 lines

I trust you know what you are doing - but I do not get it.

Some pointers or examples for the correct indention would be great.

With this patch, the tree is all correct examples. :)

Quoted 7 lines

I cannot review this patch as long as I do not know the rules.

My request to update example-schema.yaml was one way to teach me. (Some people will say that is difficult/impossible to teach me, but thats another story:-) ).

Sam

maintainer Acked-by on v1 1/2
#22 lore raw
In reply to Rob Herring
Quoted 7 lines · On Wed, 15 Apr 2020 19:55:48 -0500 Rob Herring…

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

---

...

Quoted 2 lines
 .../bindings/iio/adc/adi,ad7124.yaml          |  4 +-
 .../bindings/iio/adc/lltc,ltc2496.yaml        |  6 +-
Quoted 2,047 lines
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |  4 +-
 .../bindings/input/touchscreen/goodix.yaml    |  2 +-
 .../bindings/interconnect/qcom,msm8916.yaml   |  4 +-
 .../bindings/interconnect/qcom,msm8974.yaml   |  4 +-
 .../bindings/interconnect/qcom,qcs404.yaml    |  4 +-
 .../allwinner,sun7i-a20-sc-nmi.yaml           | 12 ++--
 .../intel,ixp4xx-interrupt.yaml               |  8 +--
 .../interrupt-controller/st,stm32-exti.yaml   | 12 ++--
 .../bindings/iommu/samsung,sysmmu.yaml        | 10 +--
 .../bindings/mailbox/st,stm32-ipcc.yaml       |  2 +-
 .../media/allwinner,sun4i-a10-csi.yaml        | 28 ++++----
 .../bindings/media/amlogic,gx-vdec.yaml       | 14 ++--
 .../bindings/media/renesas,ceu.yaml           | 28 ++++----
 .../bindings/media/renesas,vin.yaml           |  8 +--
 .../devicetree/bindings/media/ti,vpe.yaml     |  2 +-
 .../memory-controllers/fsl/imx8m-ddrc.yaml    |  6 +-
 .../bindings/mfd/st,stm32-lptimer.yaml        |  4 +-
 .../bindings/mfd/st,stm32-timers.yaml         |  4 +-
 .../devicetree/bindings/mfd/syscon.yaml       | 12 ++--
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |  2 +-
 .../bindings/mmc/rockchip-dw-mshc.yaml        | 16 ++---
 .../bindings/mmc/socionext,uniphier-sd.yaml   | 14 ++--
 .../devicetree/bindings/mtd/denali,nand.yaml  |  4 +-
 .../net/allwinner,sun8i-a83t-emac.yaml        |  4 +-
 .../bindings/net/can/bosch,m_can.yaml         | 52 +++++++--------
 .../bindings/net/renesas,ether.yaml           |  4 +-
 .../bindings/net/ti,cpsw-switch.yaml          | 12 ++--
 .../bindings/net/ti,davinci-mdio.yaml         | 27 ++++----
 .../bindings/phy/intel,lgm-emmc-phy.yaml      |  2 +-
 .../devicetree/bindings/pwm/pwm-samsung.yaml  | 16 ++---
 .../bindings/remoteproc/st,stm32-rproc.yaml   |  2 +-
 .../reset/brcm,bcm7216-pcie-sata-rescal.yaml  |  4 +-
 .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------
 .../bindings/serial/amlogic,meson-uart.yaml   | 16 ++---
 .../devicetree/bindings/serial/rs485.yaml     | 17 ++---
 .../bindings/soc/amlogic/amlogic,canvas.yaml  | 10 +--
 .../bindings/sound/renesas,fsi.yaml           | 16 ++---
 .../bindings/spi/qcom,spi-qcom-qspi.yaml      | 10 +--
 .../devicetree/bindings/spi/renesas,hspi.yaml |  4 +-
 .../devicetree/bindings/spi/spi-pl022.yaml    |  2 +-
 .../bindings/spi/st,stm32-qspi.yaml           |  4 +-
 .../allwinner,sun4i-a10-system-control.yaml   | 64 +++++++++----------
 .../bindings/thermal/amlogic,thermal.yaml     | 10 +--
 .../bindings/timer/arm,arch_timer.yaml        |  4 +-
 .../bindings/timer/arm,arch_timer_mmio.yaml   |  4 +-
 .../devicetree/bindings/usb/dwc2.yaml         |  8 +--
 77 files changed, 450 insertions(+), 450 deletions(-)
Documentation/devicetree/bindings/arm/altera.yaml +3 -3
index 49e0362ddc11..b388c5aa7984 100644
@@ -13,8 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
-        - altr,socfpga-arria10
+          - altr,socfpga-cyclone5
+          - altr,socfpga-arria5
+          - altr,socfpga-arria10
       - const: altr,socfpga
...
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1 -1
index 66213bd95e6e..6cc74523ebfd 100644
@@ -25,7 +25,7 @@ select:
 
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon
 
Documentation/devicetree/bindings/arm/bitmain.yaml +1 -1
index 0efdb4ac028e..5cd5b36cff2d 100644
@@ -13,6 +13,6 @@ properties:
   compatible:
     items:
       - enum:
-        - bitmain,sophon-edge
+          - bitmain,sophon-edge
       - const: bitmain,bm1880
...
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4 -5
index 07f39d3eee7e..f7f024910e71 100644
@@ -17,9 +17,8 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
-
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
...
Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +13 -13
index 65ad6d8a3c99..113f93b9ae55 100644
@@ -17,45 +17,45 @@ properties:
       - description: LD4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld4-ref
+              - socionext,uniphier-ld4-ref
           - const: socionext,uniphier-ld4
       - description: Pro4 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pro4-ace
-            - socionext,uniphier-pro4-ref
-            - socionext,uniphier-pro4-sanji
+              - socionext,uniphier-pro4-ace
+              - socionext,uniphier-pro4-ref
+              - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
       - description: sLD8 SoC boards
         items:
           - enum:
-            - socionext,uniphier-sld8-ref
+              - socionext,uniphier-sld8-ref
           - const: socionext,uniphier-sld8
       - description: PXs2 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs2-gentil
-            - socionext,uniphier-pxs2-vodka
+              - socionext,uniphier-pxs2-gentil
+              - socionext,uniphier-pxs2-vodka
           - const: socionext,uniphier-pxs2
       - description: LD6b SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld6b-ref
+              - socionext,uniphier-ld6b-ref
           - const: socionext,uniphier-ld6b
       - description: LD11 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld11-global
-            - socionext,uniphier-ld11-ref
+              - socionext,uniphier-ld11-global
+              - socionext,uniphier-ld11-ref
           - const: socionext,uniphier-ld11
       - description: LD20 SoC boards
         items:
           - enum:
-            - socionext,uniphier-ld20-global
-            - socionext,uniphier-ld20-ref
+              - socionext,uniphier-ld20-global
+              - socionext,uniphier-ld20-ref
           - const: socionext,uniphier-ld20
       - description: PXs3 SoC boards
         items:
           - enum:
-            - socionext,uniphier-pxs3-ref
+              - socionext,uniphier-pxs3-ref
           - const: socionext,uniphier-pxs3
Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +1 -1
index 55f7938c4826..9f276bc9efa0 100644
@@ -20,7 +20,7 @@ description: |
   [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +3 -3
index baff80197d5a..cf5db5e273f3 100644
@@ -14,9 +14,9 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32mp157-syscfg
-        - const: syscon
+          - enum:
+              - st,stm32mp157-syscfg
+          - const: syscon
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +2 -2
index bfc6357476fd..6451928dd2ce 100644
@@ -26,8 +26,8 @@ properties:
     oneOf:
       - const: faraday,ftide010
       - items:
-        - const: cortina,gemini-pata
-        - const: faraday,ftide010
+          - const: cortina,gemini-pata
+          - const: faraday,ftide010
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +2 -2
index 80973619342d..32d33b983d66 100644
@@ -21,8 +21,8 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a23-rsb
       - items:
-        - const: allwinner,sun8i-a83t-rsb
-        - const: allwinner,sun8i-a23-rsb
+          - const: allwinner,sun8i-a83t-rsb
+          - const: allwinner,sun8i-a23-rsb
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +4 -4
index ed1b2126a81b..9a37a357cb4e 100644
@@ -52,12 +52,12 @@ properties:
       - const: allwinner,sun4i-a10-dram-gates-clk
 
       - items:
-        - const: allwinner,sun5i-a13-dram-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
       - items:
-        - const: allwinner,sun8i-h3-apb0-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/clock/fsl,plldig.yaml +8 -9
index a203d5d498db..8141f22410dd 100644
@@ -28,15 +28,14 @@ properties:
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
-     minimum: 650000000
-     maximum: 1300000000
-     default: 1188000000
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
 
 required:
   - compatible
Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +8 -8
index f684fe67db84..acc31b3991bd 100644
@@ -15,15 +15,15 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,mmcc-apq8064
-       - qcom,mmcc-apq8084
-       - qcom,mmcc-msm8660
-       - qcom,mmcc-msm8960
-       - qcom,mmcc-msm8974
-       - qcom,mmcc-msm8996
-       - qcom,mmcc-msm8998
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
 
   clocks:
     items:
Documentation/devicetree/bindings/connector/usb-connector.yaml +3 -3
index 4638d7adb806..369c58e22a06 100644
@@ -144,7 +144,7 @@ required:
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
-  - |+
+  - |
     muic-max77843 {
       usb_con1: connector {
         compatible = "usb-b-connector";
@@ -156,7 +156,7 @@ examples:
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
   # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-  - |+
+  - |
     ccic: s2mm005 {
       usb_con2: connector {
         compatible = "usb-c-connector";
@@ -190,7 +190,7 @@ examples:
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
   # power delivery support and enables drp.
-  - |+
+  - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
       usb_con3: connector {
Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +7 -7
index 8b9a8f337f16..fc823572bcff 100644
@@ -15,16 +15,16 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun5i-a13-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun5i-a13-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun6i-a31-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun6i-a31-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun7i-a20-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun7i-a20-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun8i-a33-crypto
+          - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +8 -8
index 2c459b8c76ff..7a60d84289cc 100644
@@ -50,16 +50,16 @@ if:
         const: allwinner,sun50i-h6-crypto
 then:
   properties:
-      clocks:
-        minItems: 3
-      clock-names:
-        minItems: 3
+    clocks:
+      minItems: 3
+    clock-names:
+      minItems: 3
 else:
   properties:
-      clocks:
-        maxItems: 2
-      clock-names:
-        maxItems: 2
+    clocks:
+      maxItems: 2
+    clock-names:
+      maxItems: 2
 
 required:
   - compatible
Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +1 -1
index 5becc60a0e28..385b23d255c3 100644
@@ -12,7 +12,7 @@ maintainers:
 properties:
   compatible:
     items:
-    - const: amlogic,gxl-crypto
+      - const: amlogic,gxl-crypto
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +20 -20
index 5d4915aed1e2..75e6479397a5 100644
@@ -21,8 +21,8 @@ properties:
       - const: allwinner,sun5i-a10s-hdmi
       - const: allwinner,sun6i-a31-hdmi
       - items:
-        - const: allwinner,sun7i-a20-hdmi
-        - const: allwinner,sun5i-a10s-hdmi
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
 
   reg:
     maxItems: 1
@@ -33,32 +33,32 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
 
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The HDMI DDC clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
 
   clock-names:
     oneOf:
       - items:
-        - const: ahb
-        - const: mod
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
 
       - items:
-        - const: ahb
-        - const: mod
-        - const: ddc
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
 
   resets:
     maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +29 -29
index e5344c4ae226..87cb77b32ee3 100644
@@ -35,26 +35,26 @@ properties:
       - const: allwinner,sun9i-a80-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun7i-a20-tcon0
-          - allwinner,sun7i-a20-tcon1
-        - const: allwinner,sun7i-a20-tcon
+          - enum:
+              - allwinner,sun7i-a20-tcon0
+              - allwinner,sun7i-a20-tcon1
+          - const: allwinner,sun7i-a20-tcon
 
       - items:
-        - enum:
-            - allwinner,sun50i-a64-tcon-lcd
-        - const: allwinner,sun8i-a83t-tcon-lcd
+          - enum:
+              - allwinner,sun50i-a64-tcon-lcd
+          - const: allwinner,sun8i-a83t-tcon-lcd
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-tcon-tv
-          - allwinner,sun50i-a64-tcon-tv
-        - const: allwinner,sun8i-a83t-tcon-tv
+          - enum:
+              - allwinner,sun8i-h3-tcon-tv
+              - allwinner,sun50i-a64-tcon-tv
+          - const: allwinner,sun8i-a83t-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun50i-h6-tcon-tv
-        - const: allwinner,sun8i-r40-tcon-tv
+          - enum:
+              - allwinner,sun50i-h6-tcon-tv
+          - const: allwinner,sun8i-r40-tcon-tv
 
   reg:
     maxItems: 1
@@ -83,37 +83,37 @@ properties:
   resets:
     anyOf:
       - items:
-        - description: TCON Reset Line
+          - description: TCON Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON LVDS Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+          - description: TCON LVDS Reset Line
 
   reset-names:
     oneOf:
       - const: lcd
 
       - items:
-        - const: lcd
-        - const: lvds
+          - const: lcd
+          - const: lvds
 
       - items:
-        - const: lcd
-        - const: edp
+          - const: lcd
+          - const: edp
 
       - items:
-        - const: lcd
-        - const: edp
-        - const: lvds
+          - const: lcd
+          - const: edp
+          - const: lvds
 
   ports:
     type: object
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +14 -14
index 9e90c2b00960..eed05b26cdf3 100644
@@ -76,28 +76,28 @@ required:
 allOf:
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun6i-a31-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 2
+      properties:
+        clocks:
+          minItems: 2
 
-        required:
-          - clock-names
+      required:
+        - clock-names
 
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun50i-a64-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun50i-a64-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 1
+      properties:
+        clocks:
+          minItems: 1
 
 additionalProperties: false
 
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +5 -5
index 4d6795690ac3..fa4769a0b26e 100644
@@ -29,11 +29,11 @@ properties:
       - const: allwinner,sun50i-h6-dw-hdmi
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-dw-hdmi
-          - allwinner,sun8i-r40-dw-hdmi
-          - allwinner,sun50i-a64-dw-hdmi
-        - const: allwinner,sun8i-a83t-dw-hdmi
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +9 -9
index 8f373029f5d2..e737951f5873 100644
@@ -32,17 +32,17 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
-          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
-          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
-        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
-        - enum:
-          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
-        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+          - enum:
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
-        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
     type: object
Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +1 -1
index 185dcc8fd1f9..78d060097052 100644
@@ -18,7 +18,7 @@ properties:
   reg: true
   reset-gpios: true
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   enforce-video-mode: true
 
 required:
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +2 -2
index d9fdb58e06b4..891de2256d22 100644
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
Documentation/devicetree/bindings/display/renesas,cmm.yaml +8 -8
index a57037b9e9ba..005406c89507 100644
@@ -21,15 +21,15 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - renesas,r8a7795-cmm
-          - renesas,r8a7796-cmm
-          - renesas,r8a77965-cmm
-          - renesas,r8a77990-cmm
-          - renesas,r8a77995-cmm
-        - const: renesas,rcar-gen3-cmm
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
       - items:
-        - const: renesas,rcar-gen2-cmm
+          - const: renesas,rcar-gen2-cmm
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +4 -4
index 39ea05e6e5ff..85056982a242 100644
@@ -69,10 +69,10 @@ properties:
     maxItems: 3
 
   reg-names:
-   items:
-     - const: gcfg
-     - const: rchanrt
-     - const: tchanrt
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
 
   msi-parent: true
 
Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +1 -1
index 5f1ed20e43ee..4f2cbd8307a7 100644
@@ -27,7 +27,7 @@ properties:
   gpio-controller: true
 
   '#gpio-cells':
-      const: 2
+    const: 2
 
   ngpios:
     minimum: 0
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +9 -9
index 0407e45eb8c4..a7a67e0a42e5 100644
@@ -16,33 +16,33 @@ properties:
     oneOf:
       - items:
           - enum:
-             - samsung,exynos5250-mali
+              - samsung,exynos5250-mali
           - const: arm,mali-t604
       - items:
           - enum:
-             - samsung,exynos5420-mali
+              - samsung,exynos5420-mali
           - const: arm,mali-t628
       - items:
           - enum:
-             - allwinner,sun50i-h6-mali
+              - allwinner,sun50i-h6-mali
           - const: arm,mali-t720
       - items:
           - enum:
-             - amlogic,meson-gxm-mali
-             - realtek,rtd1295-mali
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
           - const: arm,mali-t820
       - items:
           - enum:
-             - arm,juno-mali
+              - arm,juno-mali
           - const: arm,mali-t624
       - items:
           - enum:
-             - rockchip,rk3288-mali
-             - samsung,exynos5433-mali
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
           - const: arm,mali-t760
       - items:
           - enum:
-             - rockchip,rk3399-mali
+              - rockchip,rk3399-mali
           - const: arm,mali-t860
 
           # "arm,mali-t830"
Documentation/devicetree/bindings/gpu/vivante,gc.yaml +1 -1
index 0bc4b38d5cbb..e1ac6ff5a230 100644
@@ -9,7 +9,7 @@ title: Vivante GPU Bindings
 description: Vivante GPU core devices
 
 maintainers:
-  -  Lucas Stach <[email protected]>
+  - Lucas Stach <[email protected]>
 
 properties:
   compatible:
Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +5 -5
index 61eac76c84c4..790aa7218ee0 100644
@@ -28,14 +28,14 @@ properties:
       - const: rockchip,rk3399-i2c
       - items:
           - enum:
-            - rockchip,rk3036-i2c
-            - rockchip,rk3368-i2c
+              - rockchip,rk3036-i2c
+              - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
           - enum:
-            - rockchip,px30-i2c
-            - rockchip,rk3308-i2c
-            - rockchip,rk3328-i2c
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -2
index f0934b295edc..97087a45ce54 100644
@@ -72,8 +72,8 @@ patternProperties:
           The channel number. It can have up to 8 channels on ad7124-4
           and 16 channels on ad7124-8, numbered from 0 to 15.
         items:
-         minimum: 0
-         maximum: 15
+          minimum: 0
+          maximum: 15
 
       adi,reference-select:
         description: |
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +3 -3
index 118809a03279..97f521d654ea 100644
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology / Analog Devices LTC2496 ADC
 
 maintainers:
- - Lars-Peter Clausen <lars-Qo5EllUWu/[email protected]>
- - Michael Hennerich <[email protected]>
- - Stefan Popa <[email protected]>
+  - Lars-Peter Clausen <lars-Qo5EllUWu/[email protected]>
+  - Michael Hennerich <[email protected]>
+  - Stefan Popa <[email protected]>
 
 properties:
   compatible:
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -2
index 5b3b71c9c018..512a6af5aa42 100644
@@ -16,8 +16,8 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-        - const: allwinner,sun50i-a64-lradc
-        - const: allwinner,sun8i-a83t-r-lradc
+          - const: allwinner,sun50i-a64-lradc
+          - const: allwinner,sun8i-a83t-r-lradc
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1 -1
index c8ea9434c9cc..e81cfa56f25a 100644
@@ -63,7 +63,7 @@ required:
   - interrupts
 
 examples:
-- |
+  - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +2 -2
index 4107e60cab12..e1009ae4e8f7 100644
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <[email protected]>
 
 description: |
-   The Qualcomm MSM8916 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm MSM8916 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   compatible:
Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +2 -2
index 9af3c6e59cff..8004c4baf397 100644
@@ -10,8 +10,8 @@ maintainers:
   - Brian Masney <[email protected]>
 
 description: |
-   The Qualcomm MSM8974 interconnect providers support setting system
-   bandwidth requirements between various network-on-chip fabrics.
+  The Qualcomm MSM8974 interconnect providers support setting system
+  bandwidth requirements between various network-on-chip fabrics.
 
 properties:
   reg:
Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +2 -2
index 8d65c5f80679..3fbb8785fbc9 100644
@@ -10,8 +10,8 @@ maintainers:
   - Georgi Djakov <[email protected]>
 
 description: |
-   The Qualcomm QCS404 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
+  The Qualcomm QCS404 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
 
 properties:
   reg:
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +6 -6
index cf09055da78b..7cd6b8bacfa0 100644
@@ -27,15 +27,15 @@ properties:
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
       - items:
-        - const: allwinner,sun8i-a83t-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun8i-a83t-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - const: allwinner,sun9i-a80-sc-nmi
       - items:
-        - const: allwinner,sun50i-a64-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-a64-r-intc
+          - const: allwinner,sun6i-a31-r-intc
       - items:
-        - const: allwinner,sun50i-h6-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-h6-r-intc
+          - const: allwinner,sun6i-a31-r-intc
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +4 -4
index ccc507f384d2..14dced11877b 100644
@@ -25,10 +25,10 @@ properties:
   compatible:
     items:
       - enum:
-        - intel,ixp42x-interrupt
-        - intel,ixp43x-interrupt
-        - intel,ixp45x-interrupt
-        - intel,ixp46x-interrupt
+          - intel,ixp42x-interrupt
+          - intel,ixp43x-interrupt
+          - intel,ixp45x-interrupt
+          - intel,ixp46x-interrupt
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +6 -6
index 9e5c6608b4e3..2a5b29567926 100644
@@ -14,13 +14,13 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32-exti
-          - st,stm32h7-exti
+          - enum:
+              - st,stm32-exti
+              - st,stm32h7-exti
       - items:
-        - enum:
-          - st,stm32mp1-exti
-        - const: syscon
+          - enum:
+              - st,stm32mp1-exti
+          - const: syscon
 
   "#interrupt-cells":
     const: 2
Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +5 -5
index 0e33cd9e010e..af51b91c893e 100644
@@ -54,13 +54,13 @@ properties:
   clock-names:
     oneOf:
       - items:
-        - const: sysmmu
+          - const: sysmmu
       - items:
-        - const: sysmmu
-        - const: master
+          - const: sysmmu
+          - const: master
       - items:
-        - const: aclk
-        - const: pclk
+          - const: aclk
+          - const: pclk
 
   "#iommu-cells":
     const: 0
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +1 -1
index 5b13d6672996..db851541d619 100644
@@ -24,7 +24,7 @@ properties:
     maxItems: 1
 
   clocks:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
     items:
Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +14 -14
index 8453ee340b9f..09318830db47 100644
@@ -20,11 +20,11 @@ properties:
       - const: allwinner,sun4i-a10-csi1
       - const: allwinner,sun7i-a20-csi0
       - items:
-        - const: allwinner,sun7i-a20-csi1
-        - const: allwinner,sun4i-a10-csi1
+          - const: allwinner,sun7i-a20-csi1
+          - const: allwinner,sun4i-a10-csi1
       - items:
-        - const: allwinner,sun8i-r40-csi0
-        - const: allwinner,sun7i-a20-csi0
+          - const: allwinner,sun8i-r40-csi0
+          - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -35,24 +35,24 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The CSI interface clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI DRAM clock
 
       - items:
-        - description: The CSI interface clock
-        - description: The CSI ISP clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI ISP clock
+          - description: The CSI DRAM clock
 
   clock-names:
     oneOf:
       - items:
-        - const: bus
-        - const: ram
+          - const: bus
+          - const: ram
 
       - items:
-        - const: bus
-        - const: isp
-        - const: ram
+          - const: bus
+          - const: isp
+          - const: ram
 
   resets:
     maxItems: 1
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +7 -7
index 37d77e065491..5a1da4029c37 100644
@@ -29,14 +29,14 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,gxbb-vdec # GXBB (S905)
-          - amlogic,gxl-vdec # GXL (S905X, S905D)
-          - amlogic,gxm-vdec # GXM (S912)
-        - const: amlogic,gx-vdec
+          - enum:
+              - amlogic,gxbb-vdec # GXBB (S905)
+              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxm-vdec # GXM (S912)
+          - const: amlogic,gx-vdec
       - enum:
-        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
-        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+          - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+          - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
 
   interrupts:
     minItems: 2
Documentation/devicetree/bindings/media/renesas,ceu.yaml +14 -14
index fcb5f13704a5..f2393458814e 100644
@@ -32,23 +32,23 @@ properties:
     additionalProperties: false
 
     properties:
-       endpoint:
-         type: object
-         additionalProperties: false
+      endpoint:
+        type: object
+        additionalProperties: false
 
          # Properties described in
          # Documentation/devicetree/bindings/media/video-interfaces.txt
-         properties:
-           remote-endpoint: true
-           hsync-active: true
-           vsync-active: true
-           field-even-active: false
-           bus-width:
-             enum: [8, 16]
-             default: 8
-
-         required:
-           - remote-endpoint
+        properties:
+          remote-endpoint: true
+          hsync-active: true
+          vsync-active: true
+          field-even-active: false
+          bus-width:
+            enum: [8, 16]
+            default: 8
+
+        required:
+          - remote-endpoint
 
     required:
       - endpoint
Documentation/devicetree/bindings/media/renesas,vin.yaml +4 -4
index 1ec947b4781f..ecc09f1124d4 100644
@@ -261,13 +261,13 @@ properties:
 
         anyOf:
           - required:
-            - endpoint@0
+              - endpoint@0
           - required:
-            - endpoint@1
+              - endpoint@1
           - required:
-            - endpoint@2
+              - endpoint@2
           - required:
-            - endpoint@3
+              - endpoint@3
 
         additionalProperties: false
 
Documentation/devicetree/bindings/media/ti,vpe.yaml +1 -1
index f3a8a350e85f..ef473f287399 100644
@@ -17,7 +17,7 @@ description: |-
 
 properties:
   compatible:
-      const: ti,dra7-vpe
+    const: ti,dra7-vpe
 
   reg:
     items:
Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +3 -3
index c9e6c22cb5be..445e46feda69 100644
@@ -25,9 +25,9 @@ properties:
   compatible:
     items:
       - enum:
-        - fsl,imx8mn-ddrc
-        - fsl,imx8mm-ddrc
-        - fsl,imx8mq-ddrc
+          - fsl,imx8mn-ddrc
+          - fsl,imx8mm-ddrc
+          - fsl,imx8mq-ddrc
       - const: fsl,imx8m-ddrc
 
   reg:
Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +2 -2
index ddf190cb800b..e675611f80d0 100644
@@ -66,8 +66,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 2
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2 -2
index 590849ee9f32..4acda7ce3b44 100644
@@ -102,8 +102,8 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 16
+          minimum: 0
+          maximum: 16
 
     required:
       - compatible
Documentation/devicetree/bindings/mfd/syscon.yaml +6 -6
index 39375e4313d2..7a39486b215a 100644
@@ -33,13 +33,13 @@ properties:
   compatible:
     anyOf:
       - items:
-        - enum:
-          - allwinner,sun8i-a83t-system-controller
-          - allwinner,sun8i-h3-system-controller
-          - allwinner,sun8i-v3s-system-controller
-          - allwinner,sun50i-a64-system-controller
+          - enum:
+              - allwinner,sun8i-a83t-system-controller
+              - allwinner,sun8i-h3-system-controller
+              - allwinner,sun8i-v3s-system-controller
+              - allwinner,sun50i-a64-system-controller
 
-        - const: syscon
+          - const: syscon
 
       - contains:
           const: syscon
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +1 -1
index 2f45dd0d04db..d43a0c557a44 100644
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-         - socionext,uniphier-sd4hc
+          - socionext,uniphier-sd4hc
       - const: cdns,sd4hc
 
   reg:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +8 -8
index 89c3edd6a728..4ee3ed6efab4 100644
@@ -30,21 +30,21 @@ properties:
       - items:
           - enum:
             # for Rockchip PX30
-            - rockchip,px30-dw-mshc
+              - rockchip,px30-dw-mshc
             # for Rockchip RK3036
-            - rockchip,rk3036-dw-mshc
+              - rockchip,rk3036-dw-mshc
             # for Rockchip RK322x
-            - rockchip,rk3228-dw-mshc
+              - rockchip,rk3228-dw-mshc
             # for Rockchip RK3308
-            - rockchip,rk3308-dw-mshc
+              - rockchip,rk3308-dw-mshc
             # for Rockchip RK3328
-            - rockchip,rk3328-dw-mshc
+              - rockchip,rk3328-dw-mshc
             # for Rockchip RK3368
-            - rockchip,rk3368-dw-mshc
+              - rockchip,rk3368-dw-mshc
             # for Rockchip RK3399
-            - rockchip,rk3399-dw-mshc
+              - rockchip,rk3399-dw-mshc
             # for Rockchip RV1108
-            - rockchip,rv1108-dw-mshc
+              - rockchip,rv1108-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +7 -7
index cdfac9b4411b..8d6413f48823 100644
@@ -35,15 +35,15 @@ properties:
     oneOf:
       - const: host
       - items:
-        - const: host
-        - const: bridge
+          - const: host
+          - const: bridge
       - items:
-        - const: host
-        - const: hw
+          - const: host
+          - const: hw
       - items:
-        - const: host
-        - const: bridge
-        - const: hw
+          - const: host
+          - const: bridge
+          - const: hw
 
   resets:
     minItems: 1
Documentation/devicetree/bindings/mtd/denali,nand.yaml +2 -2
index 46e6b6726bc0..c07b91592cbd 100644
@@ -54,8 +54,8 @@ properties:
         reg:  register reset
     oneOf:
       - items:
-        - const: nand
-        - const: reg
+          - const: nand
+          - const: reg
       - const: nand
       - const: reg
 
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +2 -2
index db36b4d86484..c7c9ad4e3f9f 100644
@@ -19,8 +19,8 @@ properties:
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
-        - const: allwinner,sun50i-h6-emac
-        - const: allwinner,sun50i-a64-emac
+          - const: allwinner,sun50i-h6-emac
+          - const: allwinner,sun50i-a64-emac
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +26 -26
index cccf8202c8f7..7a784dc4e513 100644
@@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings
 description: Bosch MCAN controller for CAN bus
 
 maintainers:
-  -  Sriram Dash <[email protected]>
+  - Sriram Dash <[email protected]>
 
 properties:
   compatible:
@@ -51,31 +51,31 @@ properties:
 
   bosch,mram-cfg:
     description: |
-                 Message RAM configuration data.
-                 Multiple M_CAN instances can share the same Message RAM
-                 and each element(e.g Rx FIFO or Tx Buffer and etc) number
-                 in Message RAM is also configurable, so this property is
-                 telling driver how the shared or private Message RAM are
-                 used by this M_CAN controller.
-
-                 The format should be as follows:
-                 <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
-                 The 'offset' is an address offset of the Message RAM where
-                 the following elements start from. This is usually set to
-                 0x0 if you're using a private Message RAM. The remain cells
-                 are used to specify how many elements are used for each FIFO/Buffer.
-
-                 M_CAN includes the following elements according to user manual:
-                 11-bit Filter	0-128 elements / 0-128 words
-                 29-bit Filter	0-64 elements / 0-128 words
-                 Rx FIFO 0	0-64 elements / 0-1152 words
-                 Rx FIFO 1	0-64 elements / 0-1152 words
-                 Rx Buffers	0-64 elements / 0-1152 words
-                 Tx Event FIFO	0-32 elements / 0-64 words
-                 Tx Buffers	0-32 elements / 0-576 words
-
-                 Please refer to 2.4.1 Message RAM Configuration in Bosch
-                 M_CAN user manual for details.
+      Message RAM configuration data.
+      Multiple M_CAN instances can share the same Message RAM
+      and each element(e.g Rx FIFO or Tx Buffer and etc) number
+      in Message RAM is also configurable, so this property is
+      telling driver how the shared or private Message RAM are
+      used by this M_CAN controller.
+
+      The format should be as follows:
+      <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+      The 'offset' is an address offset of the Message RAM where
+      the following elements start from. This is usually set to
+      0x0 if you're using a private Message RAM. The remain cells
+      are used to specify how many elements are used for each FIFO/Buffer.
+
+      M_CAN includes the following elements according to user manual:
+      11-bit Filter	0-128 elements / 0-128 words
+      29-bit Filter	0-64 elements / 0-128 words
+      Rx FIFO 0	0-64 elements / 0-1152 words
+      Rx FIFO 1	0-64 elements / 0-1152 words
+      Rx Buffers	0-64 elements / 0-1152 words
+      Tx Event FIFO	0-32 elements / 0-64 words
+      Tx Buffers	0-32 elements / 0-576 words
+
+      Please refer to 2.4.1 Message RAM Configuration in Bosch
+      M_CAN user manual for details.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/int32-array
       - items:
Documentation/devicetree/bindings/net/renesas,ether.yaml +2 -2
index 7f84df9790e2..2eaa8799e002 100644
@@ -40,8 +40,8 @@ properties:
 
   reg:
     items:
-       - description: E-DMAC/feLic registers
-       - description: TSU registers
+      - description: E-DMAC/feLic registers
+      - description: TSU registers
     minItems: 1
 
   interrupts:
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +6 -6
index 976f139bb66e..8fc8d3be303b 100644
@@ -23,14 +23,14 @@ properties:
     oneOf:
       - const: ti,cpsw-switch
       - items:
-         - const: ti,am335x-cpsw-switch
-         - const: ti,cpsw-switch
+          - const: ti,am335x-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,am4372-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,am4372-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,dra7-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,dra7-cpsw-switch
+          - const: ti,cpsw-switch
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +13 -14
index 242ac4935a4b..2ea14ab29254 100644
@@ -18,25 +18,24 @@ allOf:
 properties:
   compatible:
     oneOf:
-       - const: ti,davinci_mdio
-       - items:
-         - const: ti,keystone_mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,am4372-mdio
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
+      - const: ti,davinci_mdio
+      - items:
+          - const: ti,keystone_mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,am4372-mdio
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
 
   reg:
     maxItems: 1
 
   bus_freq:
-      maximum: 2500000
-      description:
-        MDIO Bus frequency
+    maximum: 2500000
+    description: MDIO Bus frequency
 
   ti,hwmods:
     description: TI hwmod name
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +1 -1
index 9a346d6290d9..77bb5309918e 100644
@@ -23,7 +23,7 @@ description: |+
 
 properties:
   compatible:
-      const: intel,lgm-emmc-phy
+    const: intel,lgm-emmc-phy
 
   "#phy-cells":
     const: 0
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +8 -8
index ea7f32905172..4fe64f4dd594 100644
@@ -49,17 +49,17 @@ properties:
       are available.
     oneOf:
       - items:
-        - const: timers
+          - const: timers
       - items:
-        - const: timers
-        - const: pwm-tclk0
+          - const: timers
+          - const: pwm-tclk0
       - items:
-        - const: timers
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk1
       - items:
-        - const: timers
-        - const: pwm-tclk0
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk0
+          - const: pwm-tclk1
 
   interrupts:
     description:
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +1 -1
index c0d83865e933..4ff4d3df0a06 100644
@@ -25,7 +25,7 @@ properties:
     maxItems: 3
 
   resets:
-     maxItems: 1
+    maxItems: 1
 
   st,syscfg-holdboot:
     allOf:
Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +3 -1
index 512a33bdb208..dfce6738b033 100644
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: BCM7216 RESCAL reset controller
 
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
 
 maintainers:
   - Florian Fainelli <[email protected]>
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +19 -19
index 48c6cafca90c..57b087574aa1 100644
@@ -38,10 +38,10 @@ properties:
           minItems: 3
           maxItems: 3
     description: |
-       Phandle/offset/mask triplet. The phandle to pwrcfg used to
-       access control register at offset, and change the dbp (Disable Backup
-       Protection) bit represented by the mask, mandatory to disable/enable backup
-       domain (RTC registers) write protection.
+      Phandle/offset/mask triplet. The phandle to pwrcfg used to
+      access control register at offset, and change the dbp (Disable Backup
+      Protection) bit represented by the mask, mandatory to disable/enable backup
+      domain (RTC registers) write protection.
 
   assigned-clocks:
     description: |
@@ -78,14 +78,14 @@ allOf:
             const: st,stm32h7-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-       required:
-         - clock-names
-         - st,syscfg
+      required:
+        - clock-names
+        - st,syscfg
 
   - if:
       properties:
@@ -94,16 +94,16 @@ allOf:
             const: st,stm32mp1-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-         assigned-clocks: false
-         assigned-clock-parents: false
+        assigned-clocks: false
+        assigned-clock-parents: false
 
-       required:
-         - clock-names
+      required:
+        - clock-names
 
 required:
   - compatible
Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +8 -8
index d4178ab0d675..75ebc9952a99 100644
@@ -24,18 +24,18 @@ properties:
     oneOf:
       - description: Always-on power domain UART controller
         items:
-        - enum:
+          - enum:
+              - amlogic,meson6-uart
+              - amlogic,meson8-uart
+              - amlogic,meson8b-uart
+              - amlogic,meson-gx-uart
+          - const: amlogic,meson-ao-uart
+      - description: Everything-Else power domain UART controller
+        enum:
           - amlogic,meson6-uart
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
-        - const: amlogic,meson-ao-uart
-      - description: Everything-Else power domain UART controller
-        enum:
-        - amlogic,meson6-uart
-        - amlogic,meson8-uart
-        - amlogic,meson8b-uart
-        - amlogic,meson-gx-uart
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/serial/rs485.yaml +9 -8
index d4beaf11222d..2b8261ea6d9c 100644
@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
-  -  Rob Herring <[email protected]>
+  - Rob Herring <[email protected]>
 
 properties:
   rs485-rts-delay:
@@ -37,9 +36,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
 
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
-   description: enables the receiving of data even while sending data.
-   $ref: /schemas/types.yaml#/definitions/flag
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+...
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +5 -5
index cb008fd188d8..02b2d5ba01d6 100644
@@ -26,11 +26,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,meson8-canvas
-          - amlogic,meson8b-canvas
-          - amlogic,meson8m2-canvas
-        - const: amlogic,canvas
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
       - const: amlogic,canvas # GXBB and newer SoCs
 
   reg:
Documentation/devicetree/bindings/sound/renesas,fsi.yaml +8 -8
index d1b65554e681..91cf4176abd5 100644
@@ -17,16 +17,16 @@ properties:
     oneOf:
       # for FSI2 SoC
       - items:
-        - enum:
-          - renesas,fsi2-sh73a0
-          - renesas,fsi2-r8a7740
-        - enum:
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,fsi2-sh73a0
+              - renesas,fsi2-r8a7740
+          - enum:
+              - renesas,sh_fsi2
       # for Generic
       - items:
-        - enum:
-          - renesas,sh_fsi
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,sh_fsi
+              - renesas,sh_fsi2
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +5 -5
index 0cf470eaf2a0..406286149a6b 100644
@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
 maintainers:
- - Mukesh Savaliya <[email protected]>
- - Akash Asthana <[email protected]>
+  - Mukesh Savaliya <[email protected]>
+  - Akash Asthana <[email protected]>
 
-description:
- The QSPI controller allows SPI protocol communication in single, dual, or quad
- wire transmission modes for read/write access to slaves such as NOR flash.
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
 
 allOf:
   - $ref: /spi/spi-controller.yaml#
Documentation/devicetree/bindings/spi/renesas,hspi.yaml +2 -2
index c429cf4bea5b..f492cb9fea12 100644
@@ -16,8 +16,8 @@ properties:
   compatible:
     items:
       - enum:
-        - renesas,hspi-r8a7778 # R-Car M1A
-        - renesas,hspi-r8a7779 # R-Car H1
+          - renesas,hspi-r8a7778 # R-Car M1A
+          - renesas,hspi-r8a7779 # R-Car H1
       - const: renesas,hspi
 
   reg:
Documentation/devicetree/bindings/spi/spi-pl022.yaml +1 -1
index dfb697c69341..22ba4e90655b 100644
@@ -51,7 +51,7 @@ properties:
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
-               priority to minimise the transfer latency on the bus (boolean)
+      priority to minimise the transfer latency on the bus (boolean)
     type: boolean
 
   dmas:
Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +2 -2
index 3665a5fe6b7f..1a342ce1f798 100644
@@ -24,8 +24,8 @@ properties:
 
   reg-names:
     items:
-     - const: qspi
-     - const: qspi_mm
+      - const: qspi
+      - const: qspi_mm
 
   clocks:
     maxItems: 1
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +32 -32
index 4b5509436588..f5825935fd22 100644
@@ -29,8 +29,8 @@ properties:
       - const: allwinner,sun4i-a10-system-control
       - const: allwinner,sun5i-a13-system-control
       - items:
-        - const: allwinner,sun7i-a20-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,sun7i-a20-system-control
+          - const: allwinner,sun4i-a10-system-control
       - const: allwinner,sun8i-a23-system-control
       - const: allwinner,sun8i-h3-system-control
       - const: allwinner,sun50i-a64-sram-controller
@@ -38,11 +38,11 @@ properties:
       - const: allwinner,sun50i-a64-system-control
       - const: allwinner,sun50i-h5-system-control
       - items:
-        - const: allwinner,sun50i-h6-system-control
-        - const: allwinner,sun50i-a64-system-control
+          - const: allwinner,sun50i-h6-system-control
+          - const: allwinner,sun50i-a64-system-control
       - items:
-        - const: allwinner,suniv-f1c100s-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,suniv-f1c100s-system-control
+          - const: allwinner,sun4i-a10-system-control
 
   reg:
     maxItems: 1
@@ -69,44 +69,44 @@ patternProperties:
               - const: allwinner,sun4i-a10-sram-d
               - const: allwinner,sun50i-a64-sram-c
               - items:
-                - const: allwinner,sun5i-a13-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
+                  - const: allwinner,sun5i-a13-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun7i-a20-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
+                  - const: allwinner,sun7i-a20-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun5i-a13-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun5i-a13-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun7i-a20-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun7i-a20-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun8i-a23-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun8i-a23-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun8i-h3-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun8i-h3-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-a64-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-a64-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-h5-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-h5-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun50i-h6-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
+                  - const: allwinner,sun50i-h6-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,sun5i-a13-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,sun5i-a13-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun7i-a20-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,sun7i-a20-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,suniv-f1c100s-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - const: allwinner,suniv-f1c100s-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun50i-h6-sram-c
-                - const: allwinner,sun50i-a64-sram-c
+                  - const: allwinner,sun50i-h6-sram-c
+                  - const: allwinner,sun50i-a64-sram-c
 
 required:
   - "#address-cells"
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +5 -5
index e43ec50bda37..999c6b365f1d 100644
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal
 
 properties:
   compatible:
-      items:
-        - enum:
-            - amlogic,g12a-cpu-thermal
-            - amlogic,g12a-ddr-thermal
-        - const: amlogic,g12a-thermal
+    items:
+      - enum:
+          - amlogic,g12a-cpu-thermal
+          - amlogic,g12a-ddr-thermal
+      - const: amlogic,g12a-thermal
 
   reg:
     maxItems: 1
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +2 -2
index fa255672e8e5..135186f83925 100644
@@ -28,10 +28,10 @@ properties:
               - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv7-timer
+              - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv8-timer
+              - arm,armv8-timer
 
   interrupts:
     items:
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +2 -2
index 582bbef62b95..6ff718ede184 100644
@@ -20,7 +20,7 @@ properties:
   compatible:
     items:
       - enum:
-        - arm,armv7-timer-mem
+          - arm,armv7-timer-mem
 
   reg:
     maxItems: 1
@@ -77,7 +77,7 @@ patternProperties:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
         maxItems: 2
         items:
Documentation/devicetree/bindings/usb/dwc2.yaml +4 -5
index 0d6d850a7f17..fb2f62aef5fa 100644
@@ -62,14 +62,14 @@ properties:
 
   resets:
     items:
-     - description: common reset
-     - description: ecc reset
+      - description: common reset
+      - description: ecc reset
     minItems: 1
 
   reset-names:
     items:
-     - const: dwc2
-     - const: dwc2-ecc
+      - const: dwc2
+      - const: dwc2-ecc
     minItems: 1
 
   phys:
--

2.20.1

Acked-by on v1 1/2
#23 lore raw
In reply to Rob Herring
Quoted 6 lines · Rob Herring

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

I see that people had comments but I can't judge the topics raised. So, I trust you guys that you find out when it is good to go and for that, here is my ack:

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/