dt-bindings: Clean-up schema indentation formatting
Subsystems (96)
Rob Herring
maintainerPATCH 1/2 dt-bindings: Clean-up schema indentation formatting
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
--- .../devicetree/bindings/arm/altera.yaml | 6 +- .../amlogic/amlogic,meson-gx-ao-secure.yaml | 2 +- .../devicetree/bindings/arm/bitmain.yaml | 2 +- .../devicetree/bindings/arm/nxp/lpc32xx.yaml | 9 ++- .../bindings/arm/socionext/uniphier.yaml | 26 ++++---- .../bindings/arm/stm32/st,mlahb.yaml | 2 +- .../bindings/arm/stm32/st,stm32-syscon.yaml | 6 +- .../bindings/ata/faraday,ftide010.yaml | 4 +- .../bindings/bus/allwinner,sun8i-a23-rsb.yaml | 4 +- .../clock/allwinner,sun4i-a10-gates-clk.yaml | 8 +-- .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++-- .../devicetree/bindings/clock/qcom,mmcc.yaml | 16 ++--- .../bindings/connector/usb-connector.yaml | 6 +- .../crypto/allwinner,sun4i-a10-crypto.yaml | 14 ++-- .../bindings/crypto/allwinner,sun8i-ce.yaml | 16 ++--- .../bindings/crypto/amlogic,gxl-crypto.yaml | 2 +- .../display/allwinner,sun4i-a10-hdmi.yaml | 40 ++++++------ .../display/allwinner,sun4i-a10-tcon.yaml | 58 ++++++++--------- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++---- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +-- .../bindings/display/bridge/lvds-codec.yaml | 18 +++--- .../display/panel/sony,acx424akp.yaml | 2 +- .../display/panel/xinpeng,xpp055c272.yaml | 4 +- .../bindings/display/renesas,cmm.yaml | 16 ++--- .../devicetree/bindings/dma/ti/k3-udma.yaml | 8 +-- .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 +- .../bindings/gpu/arm,mali-midgard.yaml | 18 +++--- .../devicetree/bindings/gpu/vivante,gc.yaml | 2 +- .../devicetree/bindings/i2c/i2c-rk3x.yaml | 10 +-- .../bindings/iio/adc/adi,ad7124.yaml | 4 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 6 +- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 4 +- .../bindings/input/touchscreen/goodix.yaml | 2 +- .../bindings/interconnect/qcom,msm8916.yaml | 4 +- .../bindings/interconnect/qcom,msm8974.yaml | 4 +- .../bindings/interconnect/qcom,qcs404.yaml | 4 +- .../allwinner,sun7i-a20-sc-nmi.yaml | 12 ++-- .../intel,ixp4xx-interrupt.yaml | 8 +-- .../interrupt-controller/st,stm32-exti.yaml | 12 ++-- .../bindings/iommu/samsung,sysmmu.yaml | 10 +-- .../bindings/mailbox/st,stm32-ipcc.yaml | 2 +- .../media/allwinner,sun4i-a10-csi.yaml | 28 ++++---- .../bindings/media/amlogic,gx-vdec.yaml | 14 ++-- .../bindings/media/renesas,ceu.yaml | 28 ++++---- .../bindings/media/renesas,vin.yaml | 8 +-- .../devicetree/bindings/media/ti,vpe.yaml | 2 +- .../memory-controllers/fsl/imx8m-ddrc.yaml | 6 +- .../bindings/mfd/st,stm32-lptimer.yaml | 4 +- .../bindings/mfd/st,stm32-timers.yaml | 4 +- .../devicetree/bindings/mfd/syscon.yaml | 12 ++-- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- .../bindings/mmc/rockchip-dw-mshc.yaml | 16 ++--- .../bindings/mmc/socionext,uniphier-sd.yaml | 14 ++-- .../devicetree/bindings/mtd/denali,nand.yaml | 4 +- .../net/allwinner,sun8i-a83t-emac.yaml | 4 +- .../bindings/net/can/bosch,m_can.yaml | 52 +++++++-------- .../bindings/net/renesas,ether.yaml | 4 +- .../bindings/net/ti,cpsw-switch.yaml | 12 ++-- .../bindings/net/ti,davinci-mdio.yaml | 27 ++++---- .../bindings/phy/intel,lgm-emmc-phy.yaml | 2 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 16 ++--- .../bindings/remoteproc/st,stm32-rproc.yaml | 2 +- .../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 4 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------ .../bindings/serial/amlogic,meson-uart.yaml | 16 ++--- .../devicetree/bindings/serial/rs485.yaml | 17 ++--- .../bindings/soc/amlogic/amlogic,canvas.yaml | 10 +-- .../bindings/sound/renesas,fsi.yaml | 16 ++--- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 10 +-- .../devicetree/bindings/spi/renesas,hspi.yaml | 4 +- .../devicetree/bindings/spi/spi-pl022.yaml | 2 +- .../bindings/spi/st,stm32-qspi.yaml | 4 +- .../allwinner,sun4i-a10-system-control.yaml | 64 +++++++++---------- .../bindings/thermal/amlogic,thermal.yaml | 10 +-- .../bindings/timer/arm,arch_timer.yaml | 4 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 4 +- .../devicetree/bindings/usb/dwc2.yaml | 8 +-- 77 files changed, 450 insertions(+), 450 deletions(-)
Documentation/devicetree/bindings/arm/altera.yaml +3 -3
@@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5 - - altr,socfpga-arria10 + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 - const: altr,socfpga ...
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1 -1
@@ -25,7 +25,7 @@ select: properties: compatible: - items: + items: - const: amlogic,meson-gx-ao-secure - const: syscon
Documentation/devicetree/bindings/arm/bitmain.yaml +1 -1
@@ -13,6 +13,6 @@ properties: compatible: items: - enum: - - bitmain,sophon-edge + - bitmain,sophon-edge - const: bitmain,bm1880 ...
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4 -5
@@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items: - - enum: - - ea,ea3250 - - phytec,phy3250 - - const: nxp,lpc3250 - + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 ...
Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +13 -13
@@ -17,45 +17,45 @@ properties: - description: LD4 SoC boards items: - enum: - - socionext,uniphier-ld4-ref + - socionext,uniphier-ld4-ref - const: socionext,uniphier-ld4 - description: Pro4 SoC boards items: - enum: - - socionext,uniphier-pro4-ace - - socionext,uniphier-pro4-ref - - socionext,uniphier-pro4-sanji + - socionext,uniphier-pro4-ace + - socionext,uniphier-pro4-ref + - socionext,uniphier-pro4-sanji - const: socionext,uniphier-pro4 - description: sLD8 SoC boards items: - enum: - - socionext,uniphier-sld8-ref + - socionext,uniphier-sld8-ref - const: socionext,uniphier-sld8 - description: PXs2 SoC boards items: - enum: - - socionext,uniphier-pxs2-gentil - - socionext,uniphier-pxs2-vodka + - socionext,uniphier-pxs2-gentil + - socionext,uniphier-pxs2-vodka - const: socionext,uniphier-pxs2 - description: LD6b SoC boards items: - enum: - - socionext,uniphier-ld6b-ref + - socionext,uniphier-ld6b-ref - const: socionext,uniphier-ld6b - description: LD11 SoC boards items: - enum: - - socionext,uniphier-ld11-global - - socionext,uniphier-ld11-ref + - socionext,uniphier-ld11-global + - socionext,uniphier-ld11-ref - const: socionext,uniphier-ld11 - description: LD20 SoC boards items: - enum: - - socionext,uniphier-ld20-global - - socionext,uniphier-ld20-ref + - socionext,uniphier-ld20-global + - socionext,uniphier-ld20-ref - const: socionext,uniphier-ld20 - description: PXs3 SoC boards items: - enum: - - socionext,uniphier-pxs3-ref + - socionext,uniphier-pxs3-ref - const: socionext,uniphier-pxs3
Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +1 -1
@@ -20,7 +20,7 @@ description: | [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible:
Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +3 -3
@@ -14,9 +14,9 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32mp157-syscfg - - const: syscon + - enum: + - st,stm32mp157-syscfg + - const: syscon reg: maxItems: 1
Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +2 -2
@@ -26,8 +26,8 @@ properties: oneOf: - const: faraday,ftide010 - items: - - const: cortina,gemini-pata - - const: faraday,ftide010 + - const: cortina,gemini-pata + - const: faraday,ftide010 reg: maxItems: 1
Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +2 -2
@@ -21,8 +21,8 @@ properties: oneOf: - const: allwinner,sun8i-a23-rsb - items: - - const: allwinner,sun8i-a83t-rsb - - const: allwinner,sun8i-a23-rsb + - const: allwinner,sun8i-a83t-rsb + - const: allwinner,sun8i-a23-rsb reg: maxItems: 1
Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +4 -4
@@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk - items: - - const: allwinner,sun5i-a13-dram-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk - items: - - const: allwinner,sun8i-h3-apb0-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk reg: maxItems: 1
Documentation/devicetree/bindings/clock/fsl,plldig.yaml +8 -9
@@ -28,15 +28,14 @@ properties: const: 0 fsl,vco-hz: - description: Optional for VCO frequency of the PLL in Hertz. - The VCO frequency of this PLL cannot be changed during runtime - only at startup. Therefore, the output frequencies are very - limited and might not even closely match the requested frequency. - To work around this restriction the user may specify its own - desired VCO frequency for the PLL. - minimum: 650000000 - maximum: 1300000000 - default: 1188000000 + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 required: - compatible
Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +8 -8
@@ -15,15 +15,15 @@ description: | power domains. properties: - compatible : + compatible: enum: - - qcom,mmcc-apq8064 - - qcom,mmcc-apq8084 - - qcom,mmcc-msm8660 - - qcom,mmcc-msm8960 - - qcom,mmcc-msm8974 - - qcom,mmcc-msm8996 - - qcom,mmcc-msm8998 + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 clocks: items:
Documentation/devicetree/bindings/connector/usb-connector.yaml +3 -3
@@ -144,7 +144,7 @@ required: examples: # Micro-USB connector with HS lines routed via controller (MUIC). - - |+ + - | muic-max77843 { usb_con1: connector { compatible = "usb-b-connector";
@@ -156,7 +156,7 @@ examples: # USB-C connector attached to CC controller (s2mm005), HS lines routed # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. - - |+ + - | ccic: s2mm005 { usb_con2: connector { compatible = "usb-c-connector";
@@ -190,7 +190,7 @@ examples: # USB-C connector attached to a typec port controller(ptn5110), which has # power delivery support and enables drp. - - |+ + - | #include <dt-bindings/usb/pd.h> typec: ptn5110 { usb_con3: connector {
Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +7 -7
@@ -15,16 +15,16 @@ properties: oneOf: - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun5i-a13-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun6i-a31-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun7i-a20-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun8i-a33-crypto + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1
Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +8 -8
@@ -50,16 +50,16 @@ if: const: allwinner,sun50i-h6-crypto then: properties: - clocks: - minItems: 3 - clock-names: - minItems: 3 + clocks: + minItems: 3 + clock-names: + minItems: 3 else: properties: - clocks: - maxItems: 2 - clock-names: - maxItems: 2 + clocks: + maxItems: 2 + clock-names: + maxItems: 2 required: - compatible
Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +1 -1
@@ -12,7 +12,7 @@ maintainers: properties: compatible: items: - - const: amlogic,gxl-crypto + - const: amlogic,gxl-crypto reg: maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +20 -20
@@ -21,8 +21,8 @@ properties: - const: allwinner,sun5i-a10s-hdmi - const: allwinner,sun6i-a31-hdmi - items: - - const: allwinner,sun7i-a20-hdmi - - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi reg: maxItems: 1
@@ -33,32 +33,32 @@ properties: clocks: oneOf: - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The HDMI DDC clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL clock-names: oneOf: - items: - - const: ahb - - const: mod - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 - items: - - const: ahb - - const: mod - - const: ddc - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 resets: maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +29 -29
92 lines not on this page · raw message
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +14 -14
@@ -76,28 +76,28 @@ required: allOf: - if: properties: - compatible: - contains: - const: allwinner,sun6i-a31-mipi-dsi + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi then: - properties: - clocks: - minItems: 2 + properties: + clocks: + minItems: 2 - required: - - clock-names + required: + - clock-names - if: properties: - compatible: - contains: - const: allwinner,sun50i-a64-mipi-dsi + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi then: - properties: - clocks: - minItems: 1 + properties: + clocks: + minItems: 1 additionalProperties: false
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +5 -5
@@ -29,11 +29,11 @@ properties: - const: allwinner,sun50i-h6-dw-hdmi - items: - - enum: - - allwinner,sun8i-h3-dw-hdmi - - allwinner,sun8i-r40-dw-hdmi - - allwinner,sun50i-a64-dw-hdmi - - const: allwinner,sun8i-a83t-dw-hdmi + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi reg: maxItems: 1
Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +9 -9
@@ -32,17 +32,17 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter - - const: lvds-encoder # Generic LVDS encoder compatible fallback + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - - enum: - - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver - - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: type: object
Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +1 -1
@@ -18,7 +18,7 @@ properties: reg: true reset-gpios: true vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage enforce-video-mode: true required:
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +2 -2
@@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatible
Documentation/devicetree/bindings/display/renesas,cmm.yaml +8 -8
@@ -21,15 +21,15 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,r8a7795-cmm - - renesas,r8a7796-cmm - - renesas,r8a77965-cmm - - renesas,r8a77990-cmm - - renesas,r8a77995-cmm - - const: renesas,rcar-gen3-cmm + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm - items: - - const: renesas,rcar-gen2-cmm + - const: renesas,rcar-gen2-cmm reg: maxItems: 1
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +4 -4
@@ -69,10 +69,10 @@ properties: maxItems: 3 reg-names: - items: - - const: gcfg - - const: rchanrt - - const: tchanrt + items: + - const: gcfg + - const: rchanrt + - const: tchanrt msi-parent: true
Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +1 -1
@@ -27,7 +27,7 @@ properties: gpio-controller: true '#gpio-cells': - const: 2 + const: 2 ngpios: minimum: 0
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +9 -9
@@ -16,33 +16,33 @@ properties: oneOf: - items: - enum: - - samsung,exynos5250-mali + - samsung,exynos5250-mali - const: arm,mali-t604 - items: - enum: - - samsung,exynos5420-mali + - samsung,exynos5420-mali - const: arm,mali-t628 - items: - enum: - - allwinner,sun50i-h6-mali + - allwinner,sun50i-h6-mali - const: arm,mali-t720 - items: - enum: - - amlogic,meson-gxm-mali - - realtek,rtd1295-mali + - amlogic,meson-gxm-mali + - realtek,rtd1295-mali - const: arm,mali-t820 - items: - enum: - - arm,juno-mali + - arm,juno-mali - const: arm,mali-t624 - items: - enum: - - rockchip,rk3288-mali - - samsung,exynos5433-mali + - rockchip,rk3288-mali + - samsung,exynos5433-mali - const: arm,mali-t760 - items: - enum: - - rockchip,rk3399-mali + - rockchip,rk3399-mali - const: arm,mali-t860 # "arm,mali-t830"
Documentation/devicetree/bindings/gpu/vivante,gc.yaml +1 -1
@@ -9,7 +9,7 @@ title: Vivante GPU Bindings description: Vivante GPU core devices maintainers: - - Lucas Stach <[email protected]> + - Lucas Stach <[email protected]> properties: compatible:
Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +5 -5
@@ -28,14 +28,14 @@ properties: - const: rockchip,rk3399-i2c - items: - enum: - - rockchip,rk3036-i2c - - rockchip,rk3368-i2c + - rockchip,rk3036-i2c + - rockchip,rk3368-i2c - const: rockchip,rk3288-i2c - items: - enum: - - rockchip,px30-i2c - - rockchip,rk3308-i2c - - rockchip,rk3328-i2c + - rockchip,px30-i2c + - rockchip,rk3308-i2c + - rockchip,rk3328-i2c - const: rockchip,rk3399-i2c reg:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -2
@@ -72,8 +72,8 @@ patternProperties: The channel number. It can have up to 8 channels on ad7124-4 and 16 channels on ad7124-8, numbered from 0 to 15. items: - minimum: 0 - maximum: 15 + minimum: 0 + maximum: 15 adi,reference-select: description: |
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +3 -3
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology / Analog Devices LTC2496 ADC maintainers: - - Lars-Peter Clausen <[email protected]> - - Michael Hennerich <[email protected]> - - Stefan Popa <[email protected]> + - Lars-Peter Clausen <[email protected]> + - Michael Hennerich <[email protected]> + - Stefan Popa <[email protected]> properties: compatible:
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -2
@@ -16,8 +16,8 @@ properties: - const: allwinner,sun4i-a10-lradc-keys - const: allwinner,sun8i-a83t-r-lradc - items: - - const: allwinner,sun50i-a64-lradc - - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc reg: maxItems: 1
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1 -1
@@ -63,7 +63,7 @@ required: - interrupts examples: -- | + - | i2c { #address-cells = <1>; #size-cells = <0>;
Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +2 -2
@@ -10,8 +10,8 @@ maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm MSM8916 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm MSM8916 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: compatible:
Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +2 -2
@@ -10,8 +10,8 @@ maintainers: - Brian Masney <[email protected]> description: | - The Qualcomm MSM8974 interconnect providers support setting system - bandwidth requirements between various network-on-chip fabrics. + The Qualcomm MSM8974 interconnect providers support setting system + bandwidth requirements between various network-on-chip fabrics. properties: reg:
Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +2 -2
@@ -10,8 +10,8 @@ maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm QCS404 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm QCS404 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: reg:
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +6 -6
@@ -27,15 +27,15 @@ properties: deprecated: true - const: allwinner,sun7i-a20-sc-nmi - items: - - const: allwinner,sun8i-a83t-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun8i-a83t-r-intc + - const: allwinner,sun6i-a31-r-intc - const: allwinner,sun9i-a80-sc-nmi - items: - - const: allwinner,sun50i-a64-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-a64-r-intc + - const: allwinner,sun6i-a31-r-intc - items: - - const: allwinner,sun50i-h6-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-h6-r-intc + - const: allwinner,sun6i-a31-r-intc reg: maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +4 -4
@@ -25,10 +25,10 @@ properties: compatible: items: - enum: - - intel,ixp42x-interrupt - - intel,ixp43x-interrupt - - intel,ixp45x-interrupt - - intel,ixp46x-interrupt + - intel,ixp42x-interrupt + - intel,ixp43x-interrupt + - intel,ixp45x-interrupt + - intel,ixp46x-interrupt reg: maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +6 -6
@@ -14,13 +14,13 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32-exti - - st,stm32h7-exti + - enum: + - st,stm32-exti + - st,stm32h7-exti - items: - - enum: - - st,stm32mp1-exti - - const: syscon + - enum: + - st,stm32mp1-exti + - const: syscon "#interrupt-cells": const: 2
Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +5 -5
@@ -54,13 +54,13 @@ properties: clock-names: oneOf: - items: - - const: sysmmu + - const: sysmmu - items: - - const: sysmmu - - const: master + - const: sysmmu + - const: master - items: - - const: aclk - - const: pclk + - const: aclk + - const: pclk "#iommu-cells": const: 0
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +1 -1
@@ -24,7 +24,7 @@ properties: maxItems: 1 clocks: - maxItems: 1 + maxItems: 1 interrupts: items:
Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +14 -14
@@ -20,11 +20,11 @@ properties: - const: allwinner,sun4i-a10-csi1 - const: allwinner,sun7i-a20-csi0 - items: - - const: allwinner,sun7i-a20-csi1 - - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 - items: - - const: allwinner,sun8i-r40-csi0 - - const: allwinner,sun7i-a20-csi0 + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1
@@ -35,24 +35,24 @@ properties: clocks: oneOf: - items: - - description: The CSI interface clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI DRAM clock - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: oneOf: - items: - - const: bus - - const: ram + - const: bus + - const: ram - items: - - const: bus - - const: isp - - const: ram + - const: bus + - const: isp + - const: ram resets: maxItems: 1
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +7 -7
@@ -29,14 +29,14 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,gxbb-vdec # GXBB (S905) - - amlogic,gxl-vdec # GXL (S905X, S905D) - - amlogic,gxm-vdec # GXM (S912) - - const: amlogic,gx-vdec + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec - enum: - - amlogic,g12a-vdec # G12A (S905X2, S905D2) - - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) interrupts: minItems: 2
Documentation/devicetree/bindings/media/renesas,ceu.yaml +14 -14
@@ -32,23 +32,23 @@ properties: additionalProperties: false properties: - endpoint: - type: object - additionalProperties: false + endpoint: + type: object + additionalProperties: false # Properties described in # Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - remote-endpoint: true - hsync-active: true - vsync-active: true - field-even-active: false - bus-width: - enum: [8, 16] - default: 8 - - required: - - remote-endpoint + properties: + remote-endpoint: true + hsync-active: true + vsync-active: true + field-even-active: false + bus-width: + enum: [8, 16] + default: 8 + + required: + - remote-endpoint required: - endpoint
Documentation/devicetree/bindings/media/renesas,vin.yaml +4 -4
@@ -261,13 +261,13 @@ properties: anyOf: - required: - - endpoint@0 + - endpoint@0 - required: - - endpoint@1 + - endpoint@1 - required: - - endpoint@2 + - endpoint@2 - required: - - endpoint@3 + - endpoint@3 additionalProperties: false
Documentation/devicetree/bindings/media/ti,vpe.yaml +1 -1
@@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,dra7-vpe + const: ti,dra7-vpe reg: items:
Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +3 -3
@@ -25,9 +25,9 @@ properties: compatible: items: - enum: - - fsl,imx8mn-ddrc - - fsl,imx8mm-ddrc - - fsl,imx8mq-ddrc + - fsl,imx8mn-ddrc + - fsl,imx8mm-ddrc + - fsl,imx8mq-ddrc - const: fsl,imx8m-ddrc reg:
Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +2 -2
@@ -66,8 +66,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 2 + minimum: 0 + maximum: 2 required: - compatible
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2 -2
@@ -102,8 +102,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 16 + minimum: 0 + maximum: 16 required: - compatible
Documentation/devicetree/bindings/mfd/syscon.yaml +6 -6
@@ -33,13 +33,13 @@ properties: compatible: anyOf: - items: - - enum: - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller - - const: syscon + - const: syscon - contains: const: syscon
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +1 -1
@@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - socionext,uniphier-sd4hc + - socionext,uniphier-sd4hc - const: cdns,sd4hc reg:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +8 -8
@@ -30,21 +30,21 @@ properties: - items: - enum: # for Rockchip PX30 - - rockchip,px30-dw-mshc + - rockchip,px30-dw-mshc # for Rockchip RK3036 - - rockchip,rk3036-dw-mshc + - rockchip,rk3036-dw-mshc # for Rockchip RK322x - - rockchip,rk3228-dw-mshc + - rockchip,rk3228-dw-mshc # for Rockchip RK3308 - - rockchip,rk3308-dw-mshc + - rockchip,rk3308-dw-mshc # for Rockchip RK3328 - - rockchip,rk3328-dw-mshc + - rockchip,rk3328-dw-mshc # for Rockchip RK3368 - - rockchip,rk3368-dw-mshc + - rockchip,rk3368-dw-mshc # for Rockchip RK3399 - - rockchip,rk3399-dw-mshc + - rockchip,rk3399-dw-mshc # for Rockchip RV1108 - - rockchip,rv1108-dw-mshc + - rockchip,rv1108-dw-mshc - const: rockchip,rk3288-dw-mshc reg:
Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +7 -7
@@ -35,15 +35,15 @@ properties: oneOf: - const: host - items: - - const: host - - const: bridge + - const: host + - const: bridge - items: - - const: host - - const: hw + - const: host + - const: hw - items: - - const: host - - const: bridge - - const: hw + - const: host + - const: bridge + - const: hw resets: minItems: 1
Documentation/devicetree/bindings/mtd/denali,nand.yaml +2 -2
@@ -54,8 +54,8 @@ properties: reg: register reset oneOf: - items: - - const: nand - - const: reg + - const: nand + - const: reg - const: nand - const: reg
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +2 -2
@@ -19,8 +19,8 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac - - const: allwinner,sun50i-a64-emac + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac reg: maxItems: 1
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +26 -26
64 lines not on this page · raw message
Documentation/devicetree/bindings/net/renesas,ether.yaml +2 -2
@@ -40,8 +40,8 @@ properties: reg: items: - - description: E-DMAC/feLic registers - - description: TSU registers + - description: E-DMAC/feLic registers + - description: TSU registers minItems: 1 interrupts:
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +6 -6
@@ -23,14 +23,14 @@ properties: oneOf: - const: ti,cpsw-switch - items: - - const: ti,am335x-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am335x-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,am4372-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am4372-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,dra7-cpsw-switch - - const: ti,cpsw-switch + - const: ti,dra7-cpsw-switch + - const: ti,cpsw-switch reg: maxItems: 1
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +13 -14
@@ -18,25 +18,24 @@ allOf: properties: compatible: oneOf: - - const: ti,davinci_mdio - - items: - - const: ti,keystone_mdio - - const: ti,davinci_mdio - - items: - - const: ti,cpsw-mdio - - const: ti,davinci_mdio - - items: - - const: ti,am4372-mdio - - const: ti,cpsw-mdio - - const: ti,davinci_mdio + - const: ti,davinci_mdio + - items: + - const: ti,keystone_mdio + - const: ti,davinci_mdio + - items: + - const: ti,cpsw-mdio + - const: ti,davinci_mdio + - items: + - const: ti,am4372-mdio + - const: ti,cpsw-mdio + - const: ti,davinci_mdio reg: maxItems: 1 bus_freq: - maximum: 2500000 - description: - MDIO Bus frequency + maximum: 2500000 + description: MDIO Bus frequency ti,hwmods: description: TI hwmod name
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +1 -1
@@ -23,7 +23,7 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + const: intel,lgm-emmc-phy "#phy-cells": const: 0
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +8 -8
@@ -49,17 +49,17 @@ properties: are available. oneOf: - items: - - const: timers + - const: timers - items: - - const: timers - - const: pwm-tclk0 + - const: timers + - const: pwm-tclk0 - items: - - const: timers - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk1 - items: - - const: timers - - const: pwm-tclk0 - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk0 + - const: pwm-tclk1 interrupts: description:
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +1 -1
@@ -25,7 +25,7 @@ properties: maxItems: 3 resets: - maxItems: 1 + maxItems: 1 st,syscfg-holdboot: allOf:
Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +3 -1
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: BCM7216 RESCAL reset controller -description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216. +description: This document describes the BCM7216 RESCAL reset controller + which is responsible for controlling the reset of the SATA and PCIe0/1 + instances on BCM7216. maintainers: - Florian Fainelli <[email protected]>
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +19 -19
@@ -38,10 +38,10 @@ properties: minItems: 3 maxItems: 3 description: | - Phandle/offset/mask triplet. The phandle to pwrcfg used to - access control register at offset, and change the dbp (Disable Backup - Protection) bit represented by the mask, mandatory to disable/enable backup - domain (RTC registers) write protection. + Phandle/offset/mask triplet. The phandle to pwrcfg used to + access control register at offset, and change the dbp (Disable Backup + Protection) bit represented by the mask, mandatory to disable/enable backup + domain (RTC registers) write protection. assigned-clocks: description: |
@@ -78,14 +78,14 @@ allOf: const: st,stm32h7-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - required: - - clock-names - - st,syscfg + required: + - clock-names + - st,syscfg - if: properties:
@@ -94,16 +94,16 @@ allOf: const: st,stm32mp1-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - assigned-clocks: false - assigned-clock-parents: false + assigned-clocks: false + assigned-clock-parents: false - required: - - clock-names + required: + - clock-names required: - compatible
Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +8 -8
@@ -24,18 +24,18 @@ properties: oneOf: - description: Always-on power domain UART controller items: - - enum: + - enum: + - amlogic,meson6-uart + - amlogic,meson8-uart + - amlogic,meson8b-uart + - amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart + - description: Everything-Else power domain UART controller + enum: - amlogic,meson6-uart - amlogic,meson8-uart - amlogic,meson8b-uart - amlogic,meson-gx-uart - - const: amlogic,meson-ao-uart - - description: Everything-Else power domain UART controller - enum: - - amlogic,meson6-uart - - amlogic,meson8-uart - - amlogic,meson8b-uart - - amlogic,meson-gx-uart reg: maxItems: 1
Documentation/devicetree/bindings/serial/rs485.yaml +9 -8
@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: RS485 serial communications Bindings -description: The RTS signal is capable of automatically controlling - line direction for the built-in half-duplex mode. - The properties described hereafter shall be given to a - half-duplex capable UART node. +description: The RTS signal is capable of automatically controlling line + direction for the built-in half-duplex mode. The properties described + hereafter shall be given to a half-duplex capable UART node. maintainers: - - Rob Herring <[email protected]> + - Rob Herring <[email protected]> properties: rs485-rts-delay:
@@ -37,9 +36,11 @@ properties: $ref: /schemas/types.yaml#/definitions/flag linux,rs485-enabled-at-boot-time: - description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. + description: enables the rs485 feature at boot time. It can be disabled + later with proper ioctl. $ref: /schemas/types.yaml#/definitions/flag rs485-rx-during-tx: - description: enables the receiving of data even while sending data. - $ref: /schemas/types.yaml#/definitions/flag + description: enables the receiving of data even while sending data. + $ref: /schemas/types.yaml#/definitions/flag +...
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +5 -5
@@ -26,11 +26,11 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,meson8-canvas - - amlogic,meson8b-canvas - - amlogic,meson8m2-canvas - - const: amlogic,canvas + - enum: + - amlogic,meson8-canvas + - amlogic,meson8b-canvas + - amlogic,meson8m2-canvas + - const: amlogic,canvas - const: amlogic,canvas # GXBB and newer SoCs reg:
Documentation/devicetree/bindings/sound/renesas,fsi.yaml +8 -8
@@ -17,16 +17,16 @@ properties: oneOf: # for FSI2 SoC - items: - - enum: - - renesas,fsi2-sh73a0 - - renesas,fsi2-r8a7740 - - enum: - - renesas,sh_fsi2 + - enum: + - renesas,fsi2-sh73a0 + - renesas,fsi2-r8a7740 + - enum: + - renesas,sh_fsi2 # for Generic - items: - - enum: - - renesas,sh_fsi - - renesas,sh_fsi2 + - enum: + - renesas,sh_fsi + - renesas,sh_fsi2 reg: maxItems: 1
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +5 -5
@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya <[email protected]> - - Akash Asthana <[email protected]> + - Mukesh Savaliya <[email protected]> + - Akash Asthana <[email protected]> -description: - The QSPI controller allows SPI protocol communication in single, dual, or quad - wire transmission modes for read/write access to slaves such as NOR flash. +description: The QSPI controller allows SPI protocol communication in single, + dual, or quad wire transmission modes for read/write access to slaves such + as NOR flash. allOf: - $ref: /spi/spi-controller.yaml#
Documentation/devicetree/bindings/spi/renesas,hspi.yaml +2 -2
@@ -16,8 +16,8 @@ properties: compatible: items: - enum: - - renesas,hspi-r8a7778 # R-Car M1A - - renesas,hspi-r8a7779 # R-Car H1 + - renesas,hspi-r8a7778 # R-Car M1A + - renesas,hspi-r8a7779 # R-Car H1 - const: renesas,hspi reg:
Documentation/devicetree/bindings/spi/spi-pl022.yaml +1 -1
@@ -51,7 +51,7 @@ properties: pl022,rt: description: indicates the controller should run the message pump with realtime - priority to minimise the transfer latency on the bus (boolean) + priority to minimise the transfer latency on the bus (boolean) type: boolean dmas:
Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +2 -2
@@ -24,8 +24,8 @@ properties: reg-names: items: - - const: qspi - - const: qspi_mm + - const: qspi + - const: qspi_mm clocks: maxItems: 1
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +32 -32
95 lines not on this page · raw message
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +5 -5
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal properties: compatible: - items: - - enum: - - amlogic,g12a-cpu-thermal - - amlogic,g12a-ddr-thermal - - const: amlogic,g12a-thermal + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal reg: maxItems: 1
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +2 -2
@@ -28,10 +28,10 @@ properties: - arm,armv7-timer - items: - enum: - - arm,armv7-timer + - arm,armv7-timer - items: - enum: - - arm,armv8-timer + - arm,armv8-timer interrupts: items:
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +2 -2
@@ -20,7 +20,7 @@ properties: compatible: items: - enum: - - arm,armv7-timer-mem + - arm,armv7-timer-mem reg: maxItems: 1
@@ -77,7 +77,7 @@ patternProperties: - description: physical timer irq - description: virtual timer irq - reg : + reg: minItems: 1 maxItems: 2 items:
Documentation/devicetree/bindings/usb/dwc2.yaml +4 -4
@@ -62,14 +62,14 @@ properties: resets: items: - - description: common reset - - description: ecc reset + - description: common reset + - description: ecc reset minItems: 1 reset-names: items: - - const: dwc2 - - const: dwc2-ecc + - const: dwc2 + - const: dwc2-ecc minItems: 1 phys:
--
2.20.1
Rob Herring
maintainerPATCH 2/2 dt-bindings: Remove cases of 'allOf' containing a '$ref'
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
--- .../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +- .../devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/hwmon/adi,ltc2947.yaml | 32 +-- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../bindings/iio/adc/adi,ad7124.yaml | 5 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +- .../bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++-- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +- .../devicetree/bindings/input/input.yaml | 9 +- .../interrupt-controller/arm,gic-v3.yaml | 39 ++- .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +- .../devicetree/bindings/leds/common.yaml | 13 +- .../devicetree/bindings/leds/leds-gpio.yaml | 3 +- .../bindings/leds/rohm,bd71828-leds.yaml | 10 +- .../bindings/mailbox/st,stm32-ipcc.yaml | 5 +- .../bindings/media/amlogic,gx-vdec.yaml | 6 +- .../media/amlogic,meson-gx-ao-cec.yaml | 3 +- .../devicetree/bindings/media/rc.yaml | 265 +++++++++--------- .../bindings/media/renesas,vin.yaml | 7 +- .../memory-controllers/exynos-srom.yaml | 14 +- .../nvidia,tegra124-emc.yaml | 9 +- .../nvidia,tegra124-mc.yaml | 3 +- .../nvidia,tegra30-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +- .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +- .../bindings/mfd/st,stm32-timers.yaml | 33 ++- .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +- .../devicetree/bindings/mfd/syscon.yaml | 5 +- .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++-- .../bindings/mmc/mmc-controller.yaml | 37 ++- .../bindings/mmc/rockchip-dw-mshc.yaml | 6 +- .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +- .../mtd/allwinner,sun4i-a10-nand.yaml | 13 +- .../bindings/mtd/nand-controller.yaml | 27 +- .../bindings/net/can/bosch,m_can.yaml | 59 ++-- .../bindings/net/ethernet-controller.yaml | 34 +-- .../devicetree/bindings/net/qca,ar803x.yaml | 17 +- .../devicetree/bindings/net/snps,dwmac.yaml | 22 +- .../bindings/net/ti,cpsw-switch.yaml | 3 +- .../bindings/net/ti,davinci-mdio.yaml | 7 +- .../bindings/pci/intel-gw-pcie.yaml | 7 +- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 45 ++- .../pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++--- .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 +- .../bindings/pinctrl/intel,lgm-io.yaml | 4 +- .../bindings/pinctrl/pinmux-node.yaml | 3 +- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 56 ++-- .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +- .../bindings/regulator/gpio-regulator.yaml | 35 ++- .../bindings/regulator/mps,mpq7920.yaml | 31 +- .../bindings/regulator/regulator.yaml | 5 +- .../regulator/rohm,bd71828-regulator.yaml | 34 +-- .../bindings/regulator/st,stm32-booster.yaml | 3 +- .../regulator/st,stm32mp1-pwr-reg.yaml | 3 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +- .../bindings/reset/intel,rcu-gw.yaml | 3 +- .../devicetree/bindings/riscv/cpus.yaml | 20 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +- .../devicetree/bindings/serial/pl011.yaml | 10 +- .../devicetree/bindings/serial/rs485.yaml | 26 +- .../bindings/serial/samsung_uart.yaml | 5 +- .../bindings/sound/adi,adau7118.yaml | 20 +- .../sound/allwinner,sun4i-a10-codec.yaml | 41 ++- .../bindings/sound/qcom,wcd934x.yaml | 3 +- .../bindings/spi/renesas,sh-msiof.yaml | 42 ++- .../bindings/spi/spi-controller.yaml | 14 +- .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++-- .../devicetree/bindings/spi/spi-sifive.yaml | 14 +- .../bindings/thermal/qcom-tsens.yaml | 7 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +- 91 files changed, 881 insertions(+), 1103 deletions(-)
Documentation/devicetree/bindings/arm/cpus.yaml +40 -41
@@ -171,49 +171,48 @@ properties: - qcom,scorpion enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: + $ref: '/schemas/types.yaml#/definitions/string' + oneOf: # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table + - enum: + - psci + - spin-table # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - aspeed,ast2600-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - marvell,mmp3-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - ti,am3352 - - ti,am4372 + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - marvell,mmp3-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + - ti,am3352 + - ti,am4372 cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64'
Documentation/devicetree/bindings/arm/l2c2x0.yaml +37 -50
151 lines not on this page · raw message
Documentation/devicetree/bindings/arm/psci.yaml +7 -8
@@ -69,13 +69,12 @@ properties: method: description: The method of calling the PSCI firmware. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - enum: - # SMC #0, with the register assignments specified in this binding. - - smc + $ref: /schemas/types.yaml#/definitions/string-array + enum: + + - smc # HVC #0, with the register assignments specified in this binding. - - hvc + - hvc cpu_suspend: $ref: /schemas/types.yaml#/definitions/uint32
@@ -107,8 +106,8 @@ properties: patternProperties: "^power-domain-": - allOf: - - $ref: "../power/power-domain.yaml#" + $ref: "../power/power-domain.yaml#" + type: object description: | ARM systems can have multiple cores, sometimes in an hierarchical
Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2 -3
@@ -22,9 +22,8 @@ properties: Adaptive Supply Voltage bin selection. This can be used to determine the ASV bin of an SoC if respective information is missing in the CHIPID registers or in the OTP memory. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - compatible
Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +2 -3
@@ -31,12 +31,11 @@ properties: maxItems: 1 allwinner,sram: - allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array - - maxItems: 1 description: The SRAM that needs to be claimed to access the display engine bus. + $ref: /schemas/types.yaml#definitions/phandle-array + maxItems: 1 ranges: true
Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +2 -3
@@ -24,9 +24,8 @@ properties: clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 clock-mult: description: Fixed multiplier
Documentation/devicetree/bindings/connector/usb-connector.yaml +13 -15
@@ -27,8 +27,8 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - mini - micro
@@ -57,8 +57,8 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - source - sink
@@ -66,18 +66,18 @@ properties: try-power-role: description: Preferred power role. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - - source - - sink - - dual + - source + - sink + - dual data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - host - device
@@ -95,8 +95,7 @@ properties: defined in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array sink-pdos: description: An array of u32 with each entry providing supported power sink
@@ -108,8 +107,7 @@ properties: in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array op-sink-microwatt: description: Sink required operating power in microwatt, if source can't
Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +4 -5
@@ -36,11 +36,10 @@ properties: dma-maxburst: description: Set number of maximum dma burst supported - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 2 - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 required: - compatible
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +3 -4
@@ -66,10 +66,9 @@ properties: - allwinner,sun50i-h6-display-engine allwinner,pipelines: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +2 -3
@@ -71,11 +71,10 @@ properties: maxItems: 4 clock-output-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - maxItems: 1 description: Name of the LCD pixel clock created. + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 dmas: maxItems: 1
Documentation/devicetree/bindings/display/panel/panel-common.yaml +2 -3
@@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 90, 180, 270 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270] # Display Timings panel-timing:
Documentation/devicetree/bindings/dma/dma-common.yaml +1 -2
@@ -31,8 +31,7 @@ properties: kernel. i.e. first channel corresponds to LSB. The first item in the array is for channels 0-31, the second is for channels 32-63, etc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 1 # Should be enough
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +6 -12
@@ -78,25 +78,21 @@ properties: ti,sci: description: phandle to TI-SCI compatible System controller node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-dev-id: description: TI-SCI device id of UDMAP - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 ti,ringacc: description: phandle to the ring accelerator node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-rm-range-tchan: description: | Array of UDMA tchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255
@@ -105,8 +101,7 @@ properties: description: | Array of UDMA rchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255
@@ -115,8 +110,7 @@ properties: description: | Array of UDMA rflow resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255
Documentation/devicetree/bindings/eeprom/at24.yaml +4 -7
@@ -118,14 +118,13 @@ properties: maxItems: 1 pagesize: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The length of the pagesize for writing. Please consult the manual of your device, that value varies a lot. A wrong value may result in data loss! If not specified, a safety value of '1' is used which will be very slow. - enum: [ 1, 8, 16, 32, 64, 128, 258 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 8, 16, 32, 64, 128, 258] default: 1 read-only:
@@ -148,18 +147,16 @@ properties: wp-gpios: true address-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of address bits. + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 enum: [ 8, 16 ] num-addresses: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Total number of i2c slave addresses this device takes. + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 minimum: 1 maximum: 8
Documentation/devicetree/bindings/example-schema.yaml +6 -11
@@ -138,12 +138,8 @@ properties: # 'description'. vendor,int-property: description: Vendor specific properties must have a description - # 'allOf' is the json-schema way of subclassing a schema. Here the base - # type schema is referenced and then additional constraints on the values - # are added. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 4, 6, 8, 10] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10] vendor,bool-property: description: Vendor specific properties must have a description. Boolean
@@ -154,11 +150,10 @@ properties: vendor,string-array-property: description: Vendor specific properties should reference a type in the core schema. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - - enum: [ foo, bar ] - - enum: [ baz, boo ] + $ref: /schemas/types.yaml#/definitions/string-array + items: + - enum: [foo, bar] + - enum: [baz, boo] vendor,property-in-standard-units-microvolt: description: Vendor specific properties having a standard unit suffix
Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +14 -18
@@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0
@@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0
@@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 required: - compatible
Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +9 -12
@@ -45,16 +45,14 @@ properties: The gain value for the PGA function. This is 8, 4, 2 or 1. The PGA gain affect the shunt voltage range. The range will be equal to: pga-gain * 40mV - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] default: 8 ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000
@@ -63,14 +61,13 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - default: 0x00 - minimum: 0x00 - maximum: 0xFF + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF required: - compatible
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +4 -5
@@ -30,11 +30,10 @@ allOf: Fast Mode Plus speed is selected by slave. Format is phandle to syscfg / register offset within syscfg / register bitmask for FMP bit. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 - if: properties:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2 -3
@@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +1 -2
@@ -18,8 +18,7 @@ properties: vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle reg: description: spi chipselect number according to the usual spi bindings
Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +3 -4
@@ -38,10 +38,9 @@ properties: microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 vref-supply: description: |
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +13 -18
@@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: |
@@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 "#io-channel-cells": const: 1
@@ -129,9 +126,8 @@ patternProperties: - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [SPI_R, SPI_F, MANCH_R, MANCH_F] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: |
@@ -141,9 +137,8 @@ patternProperties: - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description:
Documentation/devicetree/bindings/iio/light/tsl2772.yaml +6 -7
@@ -33,13 +33,12 @@ properties: amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 interrupts: maxItems: 1
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +21 -35
140 lines not on this page · raw message
Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2 -3
@@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to voltage:
Documentation/devicetree/bindings/input/input.yaml +4 -5
@@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff poll-interval: description: Poll interval time in milliseconds.
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +17 -22
@@ -91,18 +91,16 @@ properties: description: If using padding pages, specifies the stride of consecutive redistributors. Must be a multiple of 64kB. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64 - - multipleOf: 0x10000 - exclusiveMinimum: 0 + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0 "#redistributor-regions": description: The number of independent contiguous regions occupied by the redistributors. Required if more than one such region is present. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 4096 # Should be enough? + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096 msi-controller: description:
@@ -114,22 +112,20 @@ properties: A list of pairs <intid span>, where "intid" is the first SPI of a range that can be used an MBI, and "span" the size of that range. Multiple ranges can be provided. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 mbi-alias: description: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2 ppi-partitions: type: object
@@ -188,11 +184,10 @@ patternProperties: description: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 required: - compatible
Documentation/devicetree/bindings/iommu/arm,smmu.yaml +1 -2
@@ -56,8 +56,7 @@ properties: '#global-interrupts': description: The number of global interrupts exposed by the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters
Documentation/devicetree/bindings/leds/common.yaml +5 -8
@@ -41,8 +41,7 @@ properties: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 maximum: 8
@@ -67,8 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string enum: - on - off
@@ -79,8 +77,8 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: # LED will act as a back-light, controlled by the framebuffer system - backlight
@@ -111,8 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#definitions/uint32-matrix items: minItems: 2 maxItems: 2
Documentation/devicetree/bindings/leds/leds-gpio.yaml +1 -2
@@ -24,8 +24,7 @@ patternProperties: "(^led-[0-9a-f]$|led)": type: object - allOf: - - $ref: common.yaml# + $ref: common.yaml# properties: gpios:
Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +5 -5
@@ -34,11 +34,11 @@ patternProperties: #- $ref: "common.yaml#" rohm,led-compatible: description: LED identification string - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - bd71828-ambled - - bd71828-grnled + $ref: "/schemas/types.yaml#/definitions/string" + enum: + + - bd71828-ambled + - bd71828-grnled function: description: Purpose of LED as defined in dt-bindings/leds/common.h
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +2 -3
@@ -49,9 +49,8 @@ properties: st,proc-id: description: Processor id using the mailbox (0 or 1) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] required: - compatible
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +2 -4
@@ -77,13 +77,11 @@ properties: amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle amlogic,canvas: description: should point to a canvas provider node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if:
Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +1 -2
@@ -35,8 +35,7 @@ properties: hdmi-phandle: description: phandle to the HDMI controller - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if:
Documentation/devicetree/bindings/media/rc.yaml +132 -133
268 lines not on this page · raw message
Documentation/devicetree/bindings/media/renesas,vin.yaml +3 -4
@@ -116,10 +116,9 @@ properties: #The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 ports: type: object
Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +6 -8
@@ -51,11 +51,10 @@ patternProperties: maxItems: 1 reg-io-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2] description: Data width in bytes (1 or 2). If omitted, default of 1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] samsung,srom-page-mode: description:
@@ -64,11 +63,10 @@ patternProperties: type: boolean samsung,srom-timing: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 6 - maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +3 -6
@@ -73,10 +73,9 @@ patternProperties: timings nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: pad calibration interval in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151
@@ -136,11 +135,10 @@ patternProperties: value of the EMC_XM2DQSPADCTRL2 register for this set of timings nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: number of EMC clocks to wait before issuing any commands after clock change + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023
@@ -150,12 +148,11 @@ patternProperties: value of the EMC_ZCAL_INTERVAL register for this set of timings nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +1 -2
@@ -60,8 +60,7 @@ patternProperties: maximum: 1066000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM.
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +3 -6
@@ -56,10 +56,9 @@ patternProperties: maximum: 900000000 nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151
@@ -79,11 +78,10 @@ patternProperties: Mode Register 0. nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023
@@ -98,12 +96,11 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled. nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +1 -2
@@ -77,8 +77,7 @@ patternProperties: maximum: 900000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM.
Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +10 -10
@@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller allwinner,tp-sensitive-adjust: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection allwinner,filter-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + description: | Select median and averaging filter. Sample used for median / averaging filter:
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +16 -17
@@ -67,23 +67,22 @@ properties: description: One or two <index level filter> to describe break input configurations. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "index" indicates on which break input (0 or 1) the - configuration should be applied. - enum: [ 0 , 1] - - description: | - "level" gives the active level (0=low or 1=high) of the - input signal for this configuration - enum: [ 0, 1 ] - - description: | - "filter" gives the filtering value (up to 15) to be applied. - maximum: 15 - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 required: - "#pwm-cells"
Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +3 -6
@@ -29,8 +29,7 @@ properties: onkey: type: object - allOf: - - $ref: ../input/input.yaml + $ref: ../input/input.yaml properties: compatible:
@@ -68,8 +67,7 @@ properties: watchdog: type: object - allOf: - - $ref: ../watchdog/watchdog.yaml + $ref: ../watchdog/watchdog.yaml properties: compatible:
@@ -190,8 +188,7 @@ properties: description: STPMIC1 voltage regulators supplies "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - allOf: - - $ref: ../regulator/regulator.yaml + $ref: ../regulator/regulator.yaml "^ldo[1-2,5-6]$": type: object
Documentation/devicetree/bindings/mfd/syscon.yaml +2 -3
@@ -52,9 +52,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] hwlocks: maxItems: 1
Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +2 -2
@@ -41,8 +41,8 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object - allOf: - - $ref: mmc-controller.yaml + $ref: mmc-controller.yaml + properties: compatible: enum:
Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +33 -44
124 lines not on this page · raw message
Documentation/devicetree/bindings/mmc/mmc-controller.yaml +16 -21
@@ -76,20 +76,18 @@ properties: # Other properties bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - default: 1 description: Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1 max-frequency: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 400000 - - maximum: 200000000 description: Maximum operating frequency of the bus. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 200000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag
@@ -212,13 +210,12 @@ properties: eMMC HS400 enhanced strobe mode is supported dsr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 0xffff description: Value the card Driver Stage Register (DSR) should be programmed with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff no-sdio: $ref: /schemas/types.yaml#/definitions/flag
@@ -238,25 +235,23 @@ properties: initialization. fixed-emmc-driver-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 4 description: For non-removable eMMC, enforce this driver type. The value is the driver type as specified in the eMMC specification (table 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 post-power-on-delay-ms: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 10 description: It was invented for MMC pwrseq-simple which could be referred to mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 10 supports-cqe: $ref: /schemas/types.yaml#/definitions/flag
@@ -333,8 +328,8 @@ patternProperties: - reg "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 maxItems: 2 items:
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +2 -4
@@ -76,8 +76,7 @@ properties: high speed modes. rockchip,default-sample-phase: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 0
@@ -87,8 +86,7 @@ properties: If not specified 0 deg will be used. rockchip,desired-num-phases: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 360
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +5 -9
@@ -27,39 +27,35 @@ properties: clock to this at probe time. fifo-depth: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The maximum size of the tx/rx fifo's. If this property is not specified, the default value of the fifo size is determined from the controller registers. + $ref: /schemas/types.yaml#/definitions/uint32 card-detect-delay: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 description: Delay in milli-seconds before detecting card after card insert event. The default value is 0. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 data-addr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Override fifo address with value provided by DT. The default FIFO reg offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by driver. If the controller does not follow this rule, please use this property to set fifo address in device tree. + $ref: /schemas/types.yaml#/definitions/uint32 fifo-watermark-aligned: - allOf: - - $ref: /schemas/types.yaml#/definitions/flag description: Data done irq is expected if data length is less than watermark in PIO mode. But fifo watermark is requested to be aligned with data length in some SoC so that TX/RX irq can be generated with data done irq. Add this watermark quirk to mark this requirement and force fifo watermark setting accordingly. + $ref: /schemas/types.yaml#/definitions/flag dmas: maxItems: 1
Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +6 -7
@@ -75,13 +75,12 @@ patternProperties: allwinner,rb: description: Contains the native Ready/Busy IDs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 additionalProperties: false
Documentation/devicetree/bindings/mtd/nand-controller.yaml +11 -16
@@ -47,29 +47,26 @@ patternProperties: Contains the native Ready/Busy IDs. nand-ecc-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ] description: Desired ECC engine, either hardware (most of the time embedded in the NAND controller) or software correction (Linux will handle the calculations). soft_bch is deprecated and should be replaced by soft and nand-ecc-algo. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die] nand-ecc-algo: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ hamming, bch, rs ] description: Desired ECC algorithm. + $ref: /schemas/types.yaml#/definitions/string + enum: [hamming, bch, rs] nand-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 16 ] - - default: 8 description: Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 nand-on-flash-bbt: $ref: /schemas/types.yaml#/definitions/flag
@@ -83,18 +80,16 @@ patternProperties: build a volatile BBT in RAM. nand-ecc-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Maximum number of bits that can be corrected per ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-step-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Number of data bytes covered by a single ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-maximize: $ref: /schemas/types.yaml#/definitions/flag
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +29 -30
65 lines not on this page · raw message
Documentation/devicetree/bindings/net/ethernet-controller.yaml +15 -19
@@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$" local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 max-frame-size: $ref: /schemas/types.yaml#definitions/uint32
@@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes. managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#definitions/string + default: auto + enum: + - auto + - in-band-status fixed-link: allOf:
@@ -183,11 +180,10 @@ properties: then: properties: speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] description: Link speed. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [10, 100, 1000] full-duplex: $ref: /schemas/types.yaml#definitions/flag
Documentation/devicetree/bindings/net/qca,ar803x.yaml +6 -11
@@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] qca,keep-pll-enabled: description: |
@@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml - + $ref: /schemas/regulator/regulator.yaml examples: - |
Documentation/devicetree/bindings/net/snps,dwmac.yaml +9 -13
@@ -199,14 +199,13 @@ properties: snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 3 + maxItems: 3 snps,aal: $ref: /schemas/types.yaml#definitions/flag
@@ -301,27 +300,24 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flag
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +1 -2
@@ -150,10 +150,9 @@ properties: patternProperties: "^mdio@": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. + $ref: "ti,davinci-mdio.yaml#" required:
Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +3 -4
@@ -40,10 +40,9 @@ properties: ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio if: properties:
Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +3 -4
@@ -71,10 +71,9 @@ properties: max-link-speed: description: Specify PCI Gen for link capability. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 3, 4 ] - - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 bus-range: description: Range of bus numbers associated with this controller.
Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +5 -7
@@ -84,13 +84,12 @@ properties: gpio-line-names: true input-debounce: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 5 description: Debouncing periods in microseconds, one period per interrupt bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 5 patternProperties: # It's pretty scary, but the basic idea is that:
@@ -115,9 +114,8 @@ patternProperties: bias-pull-down: true drive-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 10, 20, 30, 40 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 20, 30, 40] required: - pins
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +17 -20
@@ -33,26 +33,23 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, - GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, - I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, - LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, - NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3, - PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16, - ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4, - SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, - SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, - TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, - USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30, - VPO12, VPO24, WDTRST1, WDTRST2 ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatible
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +21 -24
57 lines not on this page · raw message
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +51 -57
115 lines not on this page · raw message
Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +15 -16
@@ -37,22 +37,21 @@ patternProperties: be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins
Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +1 -3
@@ -24,12 +24,10 @@ properties: patternProperties: '-pins$': type: object - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml# properties: function: true
Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +1 -2
@@ -122,11 +122,10 @@ properties: this, "pins" or "pinmux" has to be specified) pinmux: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: The list of numeric pin ids and their mux settings that properties in the node apply to (either this, "pins" or "groups" have to be specified) + $ref: /schemas/types.yaml#/definitions/uint32-array pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +25 -31
96 lines not on this page · raw message
Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +1 -2
@@ -56,8 +56,7 @@ properties: amlogic,ao-sysctrl: description: phandle to the AO sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle required: - compatible
Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +5 -6
@@ -78,12 +78,11 @@ properties: A list of PWM channels used as PWM outputs on particular platform. It is an array of up to 5 elements being indices of PWM channels (from 0 to 4), the order does not matter. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - uniqueItems: true - - items: - minimum: 0 - maximum: 4 + $ref: /schemas/types.yaml#/definitions/uint32-array + uniqueItems: true + items: + minimum: 0 + maximum: 4 required: - clocks
Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +16 -19
@@ -46,24 +46,22 @@ properties: 0: LOW 1: HIGH Default is LOW if nothing else is specified. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 8 - items: - enum: [ 0, 1 ] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0 states: description: Selection of available voltages/currents provided by this regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - maxItems: 8 - items: - items: - - description: Voltage in microvolts - - description: GPIO group state value + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value startup-delay-us: description: startup time in microseconds
@@ -81,12 +79,11 @@ properties: regulator-type: description: Specifies what is being regulated. - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: - - voltage - - current - default: voltage + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage required: - compatible
Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +14 -17
@@ -21,17 +21,17 @@ properties: regulators: type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# + description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] properties: mps,switch-freq: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value
@@ -40,32 +40,29 @@ properties: patternProperties: "^ldo[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^ldortc$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^buck[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# properties: mps,buck-softstart: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270deg
Documentation/devicetree/bindings/regulator/regulator.yaml +2 -3
@@ -123,9 +123,8 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkage
Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +14 -20
@@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single LDO regulator. + $ref: regulator.yaml# properties: regulator-name:
@@ -37,10 +36,9 @@ patternProperties: "^BUCK[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single BUCK regulator. + $ref: regulator.yaml# properties: regulator-name:
@@ -49,40 +47,36 @@ patternProperties: should be "buck1", ..., "buck7" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-lpsr-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 # Supported default DVS states: # buck | run | idle | suspend | lpsr
Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +1 -2
@@ -23,8 +23,7 @@ properties: - st,stm32mp1-booster st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: phandle to system configuration controller. vdda-supply:
Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +1 -2
@@ -26,8 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" required: - compatible
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +3 -6
@@ -28,22 +28,20 @@ properties: maxItems: 1 st,syscfg-holdboot: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: remote processor reset hold boot - Phandle of syscon block. - The offset of the hold boot setting register. - The field mask of the hold boot. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 st,syscfg-tz: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Reference to the system configuration which holds the RCC trust zone mode - Phandle of syscon block. - The offset of the RCC trust zone mode register. - The field mask of the RCC trust zone mode. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 interrupts:
@@ -90,8 +88,7 @@ properties: (see ../reserved-memory/reserved-memory.txt) st,syscfg-pdds: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote 1st cell: phandle to syscon block
Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +1 -2
@@ -21,8 +21,7 @@ properties: intel,global-reset: description: Global reset register offset and bit offset. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: Register offset - description: Register bit offset
Documentation/devicetree/bindings/riscv/cpus.yaml +9 -11
@@ -40,24 +40,18 @@ properties: and identifies the type of the hart. mmu-type: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - riscv,sv32 - - riscv,sv39 - - riscv,sv48 description: Identifies the MMU address translation mode used on this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48 riscv,isa: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - rv64imac - - rv64imafdc description: Identifies the specific RISC-V instruction set architecture supported by the hart. These are documented in the RISC-V
@@ -67,6 +61,10 @@ properties: While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - rv64imac + - rv64imafdc # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +4 -5
@@ -32,11 +32,10 @@ properties: maxItems: 1 st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 description: | Phandle/offset/mask triplet. The phandle to pwrcfg used to access control register at offset, and change the dbp (Disable Backup
Documentation/devicetree/bindings/serial/pl011.yaml +4 -6
@@ -88,17 +88,15 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 3000 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3000 required: - compatible
Documentation/devicetree/bindings/serial/rs485.yaml +12 -14
@@ -16,20 +16,18 @@ maintainers: properties: rs485-rts-delay: description: prop-encoded-array <a b> - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - items: - - description: - Delay between rts signal and beginning of data sent in milliseconds. - It corresponds to the delay before sending data. - default: 0 - maximum: 1000 - - description: - Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release of the line. - default: 0 - maximum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + items: + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 1000
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/serial/samsung_uart.yaml +2 -3
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/sound/adi,adau7118.yaml +9 -11
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +20 -21
41 lines not on this page · raw message
Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +1 -2
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +19 -23
42 lines not on this page · raw message
Documentation/devicetree/bindings/spi/spi-controller.yaml +6 -8
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/spi/spi-pl022.yaml +24 -31
55 lines not on this page · raw message
Documentation/devicetree/bindings/spi/spi-sifive.yaml +6 -8
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +3 -4
Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +3 -4
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Part of the diff is not shown here. View the raw message.
Quoted 6 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>
For allwinner,
Thanks!
Maxime
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
For allwinner,
Maxime
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 9 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
This is a large change.
Was this done manually or by some script?
If it was done manually, how likely is it there are defects in the conversion?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Quoted 55 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/arm/altera.yaml | 6 +- .../amlogic/amlogic,meson-gx-ao-secure.yaml | 2 +- .../devicetree/bindings/arm/bitmain.yaml | 2 +- .../devicetree/bindings/arm/nxp/lpc32xx.yaml | 9 ++- .../bindings/arm/socionext/uniphier.yaml | 26 ++++---- .../bindings/arm/stm32/st,mlahb.yaml | 2 +- .../bindings/arm/stm32/st,stm32-syscon.yaml | 6 +- .../bindings/ata/faraday,ftide010.yaml | 4 +- .../bindings/bus/allwinner,sun8i-a23-rsb.yaml | 4 +- .../clock/allwinner,sun4i-a10-gates-clk.yaml | 8 +-- .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++-- .../devicetree/bindings/clock/qcom,mmcc.yaml | 16 ++--- .../bindings/connector/usb-connector.yaml | 6 +- .../crypto/allwinner,sun4i-a10-crypto.yaml | 14 ++-- .../bindings/crypto/allwinner,sun8i-ce.yaml | 16 ++--- .../bindings/crypto/amlogic,gxl-crypto.yaml | 2 +- .../display/allwinner,sun4i-a10-hdmi.yaml | 40 ++++++------ .../display/allwinner,sun4i-a10-tcon.yaml | 58 ++++++++--------- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++---- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +-- .../bindings/display/bridge/lvds-codec.yaml | 18 +++--- .../display/panel/sony,acx424akp.yaml | 2 +- .../display/panel/xinpeng,xpp055c272.yaml | 4 +- .../bindings/display/renesas,cmm.yaml | 16 ++--- .../devicetree/bindings/dma/ti/k3-udma.yaml | 8 +-- .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 +- .../bindings/gpu/arm,mali-midgard.yaml | 18 +++--- .../devicetree/bindings/gpu/vivante,gc.yaml | 2 +- .../devicetree/bindings/i2c/i2c-rk3x.yaml | 10 +-- .../bindings/iio/adc/adi,ad7124.yaml | 4 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 6 +- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 4 +- .../bindings/input/touchscreen/goodix.yaml | 2 +- .../bindings/interconnect/qcom,msm8916.yaml | 4 +- .../bindings/interconnect/qcom,msm8974.yaml | 4 +- .../bindings/interconnect/qcom,qcs404.yaml | 4 +- .../allwinner,sun7i-a20-sc-nmi.yaml | 12 ++-- .../intel,ixp4xx-interrupt.yaml | 8 +-- .../interrupt-controller/st,stm32-exti.yaml | 12 ++-- .../bindings/iommu/samsung,sysmmu.yaml | 10 +-- .../bindings/mailbox/st,stm32-ipcc.yaml | 2 +- .../media/allwinner,sun4i-a10-csi.yaml | 28 ++++---- .../bindings/media/amlogic,gx-vdec.yaml | 14 ++-- .../bindings/media/renesas,ceu.yaml | 28 ++++---- .../bindings/media/renesas,vin.yaml | 8 +-- .../devicetree/bindings/media/ti,vpe.yaml | 2 +- .../memory-controllers/fsl/imx8m-ddrc.yaml | 6 +-
Quoted 3 lines
.../bindings/mfd/st,stm32-lptimer.yaml | 4 +- .../bindings/mfd/st,stm32-timers.yaml | 4 +- .../devicetree/bindings/mfd/syscon.yaml | 12 ++--
Quoted 28 lines
.../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- .../bindings/mmc/rockchip-dw-mshc.yaml | 16 ++--- .../bindings/mmc/socionext,uniphier-sd.yaml | 14 ++-- .../devicetree/bindings/mtd/denali,nand.yaml | 4 +- .../net/allwinner,sun8i-a83t-emac.yaml | 4 +- .../bindings/net/can/bosch,m_can.yaml | 52 +++++++-------- .../bindings/net/renesas,ether.yaml | 4 +- .../bindings/net/ti,cpsw-switch.yaml | 12 ++-- .../bindings/net/ti,davinci-mdio.yaml | 27 ++++---- .../bindings/phy/intel,lgm-emmc-phy.yaml | 2 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 16 ++--- .../bindings/remoteproc/st,stm32-rproc.yaml | 2 +- .../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 4 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------ .../bindings/serial/amlogic,meson-uart.yaml | 16 ++--- .../devicetree/bindings/serial/rs485.yaml | 17 ++--- .../bindings/soc/amlogic/amlogic,canvas.yaml | 10 +-- .../bindings/sound/renesas,fsi.yaml | 16 ++--- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 10 +-- .../devicetree/bindings/spi/renesas,hspi.yaml | 4 +- .../devicetree/bindings/spi/spi-pl022.yaml | 2 +- .../bindings/spi/st,stm32-qspi.yaml | 4 +- .../allwinner,sun4i-a10-system-control.yaml | 64 +++++++++---------- .../bindings/thermal/amlogic,thermal.yaml | 10 +-- .../bindings/timer/arm,arch_timer.yaml | 4 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 4 +- .../devicetree/bindings/usb/dwc2.yaml | 8 +-- 77 files changed, 450 insertions(+), 450 deletions(-)
Signature · 8 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 54 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +- .../devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/hwmon/adi,ltc2947.yaml | 32 +-- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../bindings/iio/adc/adi,ad7124.yaml | 5 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +- .../bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++-- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +- .../devicetree/bindings/input/input.yaml | 9 +- .../interrupt-controller/arm,gic-v3.yaml | 39 ++- .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +- .../devicetree/bindings/leds/common.yaml | 13 +- .../devicetree/bindings/leds/leds-gpio.yaml | 3 +- .../bindings/leds/rohm,bd71828-leds.yaml | 10 +- .../bindings/mailbox/st,stm32-ipcc.yaml | 5 +- .../bindings/media/amlogic,gx-vdec.yaml | 6 +- .../media/amlogic,meson-gx-ao-cec.yaml | 3 +- .../devicetree/bindings/media/rc.yaml | 265 +++++++++--------- .../bindings/media/renesas,vin.yaml | 7 +- .../memory-controllers/exynos-srom.yaml | 14 +- .../nvidia,tegra124-emc.yaml | 9 +- .../nvidia,tegra124-mc.yaml | 3 +- .../nvidia,tegra30-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +-
Quoted 4 lines
.../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +- .../bindings/mfd/st,stm32-timers.yaml | 33 ++- .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +- .../devicetree/bindings/mfd/syscon.yaml | 5 +-
Quoted 47 lines
.../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++-- .../bindings/mmc/mmc-controller.yaml | 37 ++- .../bindings/mmc/rockchip-dw-mshc.yaml | 6 +- .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +- .../mtd/allwinner,sun4i-a10-nand.yaml | 13 +- .../bindings/mtd/nand-controller.yaml | 27 +- .../bindings/net/can/bosch,m_can.yaml | 59 ++-- .../bindings/net/ethernet-controller.yaml | 34 +-- .../devicetree/bindings/net/qca,ar803x.yaml | 17 +- .../devicetree/bindings/net/snps,dwmac.yaml | 22 +- .../bindings/net/ti,cpsw-switch.yaml | 3 +- .../bindings/net/ti,davinci-mdio.yaml | 7 +- .../bindings/pci/intel-gw-pcie.yaml | 7 +- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 45 ++- .../pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++--- .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 +- .../bindings/pinctrl/intel,lgm-io.yaml | 4 +- .../bindings/pinctrl/pinmux-node.yaml | 3 +- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 56 ++-- .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +- .../bindings/regulator/gpio-regulator.yaml | 35 ++- .../bindings/regulator/mps,mpq7920.yaml | 31 +- .../bindings/regulator/regulator.yaml | 5 +- .../regulator/rohm,bd71828-regulator.yaml | 34 +-- .../bindings/regulator/st,stm32-booster.yaml | 3 +- .../regulator/st,stm32mp1-pwr-reg.yaml | 3 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +- .../bindings/reset/intel,rcu-gw.yaml | 3 +- .../devicetree/bindings/riscv/cpus.yaml | 20 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +- .../devicetree/bindings/serial/pl011.yaml | 10 +- .../devicetree/bindings/serial/rs485.yaml | 26 +- .../bindings/serial/samsung_uart.yaml | 5 +- .../bindings/sound/adi,adau7118.yaml | 20 +- .../sound/allwinner,sun4i-a10-codec.yaml | 41 ++- .../bindings/sound/qcom,wcd934x.yaml | 3 +- .../bindings/spi/renesas,sh-msiof.yaml | 42 ++- .../bindings/spi/spi-controller.yaml | 14 +- .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++-- .../devicetree/bindings/spi/spi-sifive.yaml | 14 +- .../bindings/thermal/qcom-tsens.yaml | 7 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +- 91 files changed, 881 insertions(+), 1103 deletions(-)
Signature · 8 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
Quoted 6 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
Thanks for fixing this!
Linus Walleij
Quoted 24 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/arm/altera.yaml | 6 +- .../amlogic/amlogic,meson-gx-ao-secure.yaml | 2 +- .../devicetree/bindings/arm/bitmain.yaml | 2 +- .../devicetree/bindings/arm/nxp/lpc32xx.yaml | 9 ++- .../bindings/arm/socionext/uniphier.yaml | 26 ++++---- .../bindings/arm/stm32/st,mlahb.yaml | 2 +- .../bindings/arm/stm32/st,stm32-syscon.yaml | 6 +- .../bindings/ata/faraday,ftide010.yaml | 4 +- .../bindings/bus/allwinner,sun8i-a23-rsb.yaml | 4 +- .../clock/allwinner,sun4i-a10-gates-clk.yaml | 8 +-- .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++-- .../devicetree/bindings/clock/qcom,mmcc.yaml | 16 ++--- .../bindings/connector/usb-connector.yaml | 6 +- .../crypto/allwinner,sun4i-a10-crypto.yaml | 14 ++-- .../bindings/crypto/allwinner,sun8i-ce.yaml | 16 ++--- .../bindings/crypto/amlogic,gxl-crypto.yaml | 2 +- .../display/allwinner,sun4i-a10-hdmi.yaml | 40 ++++++------
Quoted 8 lines
.../display/allwinner,sun4i-a10-tcon.yaml | 58 ++++++++--------- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++---- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +-- .../bindings/display/bridge/lvds-codec.yaml | 18 +++--- .../display/panel/sony,acx424akp.yaml | 2 +- .../display/panel/xinpeng,xpp055c272.yaml | 4 +- .../bindings/display/renesas,cmm.yaml | 16 ++--- .../devicetree/bindings/dma/ti/k3-udma.yaml | 8 +--
Signature · 1 line
~Vinod
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
Quoted 14 lines
--- .../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +-
Signature · 5 lines
~Vinod ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Quoted 4 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 3 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Quoted 6 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>
Quoted 2,079 lines
--- .../devicetree/bindings/arm/altera.yaml | 6 +- .../amlogic/amlogic,meson-gx-ao-secure.yaml | 2 +- .../devicetree/bindings/arm/bitmain.yaml | 2 +- .../devicetree/bindings/arm/nxp/lpc32xx.yaml | 9 ++- .../bindings/arm/socionext/uniphier.yaml | 26 ++++---- .../bindings/arm/stm32/st,mlahb.yaml | 2 +- .../bindings/arm/stm32/st,stm32-syscon.yaml | 6 +- .../bindings/ata/faraday,ftide010.yaml | 4 +- .../bindings/bus/allwinner,sun8i-a23-rsb.yaml | 4 +- .../clock/allwinner,sun4i-a10-gates-clk.yaml | 8 +-- .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++-- .../devicetree/bindings/clock/qcom,mmcc.yaml | 16 ++--- .../bindings/connector/usb-connector.yaml | 6 +- .../crypto/allwinner,sun4i-a10-crypto.yaml | 14 ++-- .../bindings/crypto/allwinner,sun8i-ce.yaml | 16 ++--- .../bindings/crypto/amlogic,gxl-crypto.yaml | 2 +- .../display/allwinner,sun4i-a10-hdmi.yaml | 40 ++++++------ .../display/allwinner,sun4i-a10-tcon.yaml | 58 ++++++++--------- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++---- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +-- .../bindings/display/bridge/lvds-codec.yaml | 18 +++--- .../display/panel/sony,acx424akp.yaml | 2 +- .../display/panel/xinpeng,xpp055c272.yaml | 4 +- .../bindings/display/renesas,cmm.yaml | 16 ++--- .../devicetree/bindings/dma/ti/k3-udma.yaml | 8 +-- .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 +- .../bindings/gpu/arm,mali-midgard.yaml | 18 +++--- .../devicetree/bindings/gpu/vivante,gc.yaml | 2 +- .../devicetree/bindings/i2c/i2c-rk3x.yaml | 10 +-- .../bindings/iio/adc/adi,ad7124.yaml | 4 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 6 +- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 4 +- .../bindings/input/touchscreen/goodix.yaml | 2 +- .../bindings/interconnect/qcom,msm8916.yaml | 4 +- .../bindings/interconnect/qcom,msm8974.yaml | 4 +- .../bindings/interconnect/qcom,qcs404.yaml | 4 +- .../allwinner,sun7i-a20-sc-nmi.yaml | 12 ++-- .../intel,ixp4xx-interrupt.yaml | 8 +-- .../interrupt-controller/st,stm32-exti.yaml | 12 ++-- .../bindings/iommu/samsung,sysmmu.yaml | 10 +-- .../bindings/mailbox/st,stm32-ipcc.yaml | 2 +- .../media/allwinner,sun4i-a10-csi.yaml | 28 ++++---- .../bindings/media/amlogic,gx-vdec.yaml | 14 ++-- .../bindings/media/renesas,ceu.yaml | 28 ++++---- .../bindings/media/renesas,vin.yaml | 8 +-- .../devicetree/bindings/media/ti,vpe.yaml | 2 +- .../memory-controllers/fsl/imx8m-ddrc.yaml | 6 +- .../bindings/mfd/st,stm32-lptimer.yaml | 4 +- .../bindings/mfd/st,stm32-timers.yaml | 4 +- .../devicetree/bindings/mfd/syscon.yaml | 12 ++-- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- .../bindings/mmc/rockchip-dw-mshc.yaml | 16 ++--- .../bindings/mmc/socionext,uniphier-sd.yaml | 14 ++-- .../devicetree/bindings/mtd/denali,nand.yaml | 4 +- .../net/allwinner,sun8i-a83t-emac.yaml | 4 +- .../bindings/net/can/bosch,m_can.yaml | 52 +++++++-------- .../bindings/net/renesas,ether.yaml | 4 +- .../bindings/net/ti,cpsw-switch.yaml | 12 ++-- .../bindings/net/ti,davinci-mdio.yaml | 27 ++++---- .../bindings/phy/intel,lgm-emmc-phy.yaml | 2 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 16 ++--- .../bindings/remoteproc/st,stm32-rproc.yaml | 2 +- .../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 4 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------ .../bindings/serial/amlogic,meson-uart.yaml | 16 ++--- .../devicetree/bindings/serial/rs485.yaml | 17 ++--- .../bindings/soc/amlogic/amlogic,canvas.yaml | 10 +-- .../bindings/sound/renesas,fsi.yaml | 16 ++--- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 10 +-- .../devicetree/bindings/spi/renesas,hspi.yaml | 4 +- .../devicetree/bindings/spi/spi-pl022.yaml | 2 +- .../bindings/spi/st,stm32-qspi.yaml | 4 +- .../allwinner,sun4i-a10-system-control.yaml | 64 +++++++++---------- .../bindings/thermal/amlogic,thermal.yaml | 10 +-- .../bindings/timer/arm,arch_timer.yaml | 4 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 4 +- .../devicetree/bindings/usb/dwc2.yaml | 8 +-- 77 files changed, 450 insertions(+), 450 deletions(-)Documentation/devicetree/bindings/arm/altera.yaml +3
-3@@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5 - - altr,socfpga-arria10 + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 - const: altr,socfpgaDocumentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1
-1@@ -25,7 +25,7 @@ select: properties: compatible: - items: + items: - const: amlogic,meson-gx-ao-secure - const: sysconDocumentation/devicetree/bindings/arm/bitmain.yaml +1
-1@@ -13,6 +13,6 @@ properties: compatible: items: - enum: - - bitmain,sophon-edge + - bitmain,sophon-edge - const: bitmain,bm1880Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4
-5@@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items: - - enum: - - ea,ea3250 - - phytec,phy3250 - - const: nxp,lpc3250 - + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +13
-13@@ -17,45 +17,45 @@ properties: - description: LD4 SoC boards items: - enum: - - socionext,uniphier-ld4-ref + - socionext,uniphier-ld4-ref - const: socionext,uniphier-ld4 - description: Pro4 SoC boards items: - enum: - - socionext,uniphier-pro4-ace - - socionext,uniphier-pro4-ref - - socionext,uniphier-pro4-sanji + - socionext,uniphier-pro4-ace + - socionext,uniphier-pro4-ref + - socionext,uniphier-pro4-sanji - const: socionext,uniphier-pro4 - description: sLD8 SoC boards items: - enum: - - socionext,uniphier-sld8-ref + - socionext,uniphier-sld8-ref - const: socionext,uniphier-sld8 - description: PXs2 SoC boards items: - enum: - - socionext,uniphier-pxs2-gentil - - socionext,uniphier-pxs2-vodka + - socionext,uniphier-pxs2-gentil + - socionext,uniphier-pxs2-vodka - const: socionext,uniphier-pxs2 - description: LD6b SoC boards items: - enum: - - socionext,uniphier-ld6b-ref + - socionext,uniphier-ld6b-ref - const: socionext,uniphier-ld6b - description: LD11 SoC boards items: - enum: - - socionext,uniphier-ld11-global - - socionext,uniphier-ld11-ref + - socionext,uniphier-ld11-global + - socionext,uniphier-ld11-ref - const: socionext,uniphier-ld11 - description: LD20 SoC boards items: - enum: - - socionext,uniphier-ld20-global - - socionext,uniphier-ld20-ref + - socionext,uniphier-ld20-global + - socionext,uniphier-ld20-ref - const: socionext,uniphier-ld20 - description: PXs3 SoC boards items: - enum: - - socionext,uniphier-pxs3-ref + - socionext,uniphier-pxs3-ref - const: socionext,uniphier-pxs3Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +1
-1@@ -20,7 +20,7 @@ description: | [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible:Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +3
-3@@ -14,9 +14,9 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32mp157-syscfg - - const: syscon + - enum: + - st,stm32mp157-syscfg + - const: syscon reg: maxItems: 1Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +2
-2@@ -26,8 +26,8 @@ properties: oneOf: - const: faraday,ftide010 - items: - - const: cortina,gemini-pata - - const: faraday,ftide010 + - const: cortina,gemini-pata + - const: faraday,ftide010 reg: maxItems: 1Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +2
-2@@ -21,8 +21,8 @@ properties: oneOf: - const: allwinner,sun8i-a23-rsb - items: - - const: allwinner,sun8i-a83t-rsb - - const: allwinner,sun8i-a23-rsb + - const: allwinner,sun8i-a83t-rsb + - const: allwinner,sun8i-a23-rsb reg: maxItems: 1Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +4
-4@@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk - items: - - const: allwinner,sun5i-a13-dram-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk - items: - - const: allwinner,sun8i-h3-apb0-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk reg: maxItems: 1Documentation/devicetree/bindings/clock/fsl,plldig.yaml +8
-9@@ -28,15 +28,14 @@ properties: const: 0 fsl,vco-hz: - description: Optional for VCO frequency of the PLL in Hertz. - The VCO frequency of this PLL cannot be changed during runtime - only at startup. Therefore, the output frequencies are very - limited and might not even closely match the requested frequency. - To work around this restriction the user may specify its own - desired VCO frequency for the PLL. - minimum: 650000000 - maximum: 1300000000 - default: 1188000000 + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 required: - compatibleDocumentation/devicetree/bindings/clock/qcom,mmcc.yaml +8
-8@@ -15,15 +15,15 @@ description: | power domains. properties: - compatible : + compatible: enum: - - qcom,mmcc-apq8064 - - qcom,mmcc-apq8084 - - qcom,mmcc-msm8660 - - qcom,mmcc-msm8960 - - qcom,mmcc-msm8974 - - qcom,mmcc-msm8996 - - qcom,mmcc-msm8998 + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 clocks: items:Documentation/devicetree/bindings/connector/usb-connector.yaml +3
-3@@ -144,7 +144,7 @@ required: examples: # Micro-USB connector with HS lines routed via controller (MUIC). - - |+ + - | muic-max77843 { usb_con1: connector { compatible = "usb-b-connector";@@ -156,7 +156,7 @@ examples: # USB-C connector attached to CC controller (s2mm005), HS lines routed # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. - - |+ + - | ccic: s2mm005 { usb_con2: connector { compatible = "usb-c-connector";@@ -190,7 +190,7 @@ examples: # USB-C connector attached to a typec port controller(ptn5110), which has # power delivery support and enables drp. - - |+ + - | #include <dt-bindings/usb/pd.h> typec: ptn5110 { usb_con3: connector {Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +7
-7@@ -15,16 +15,16 @@ properties: oneOf: - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun5i-a13-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun6i-a31-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun7i-a20-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun8i-a33-crypto + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +8
-8@@ -50,16 +50,16 @@ if: const: allwinner,sun50i-h6-crypto then: properties: - clocks: - minItems: 3 - clock-names: - minItems: 3 + clocks: + minItems: 3 + clock-names: + minItems: 3 else: properties: - clocks: - maxItems: 2 - clock-names: - maxItems: 2 + clocks: + maxItems: 2 + clock-names: + maxItems: 2 required: - compatibleDocumentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +1
-1@@ -12,7 +12,7 @@ maintainers: properties: compatible: items: - - const: amlogic,gxl-crypto + - const: amlogic,gxl-crypto reg: maxItems: 1Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +20
-20@@ -21,8 +21,8 @@ properties: - const: allwinner,sun5i-a10s-hdmi - const: allwinner,sun6i-a31-hdmi - items: - - const: allwinner,sun7i-a20-hdmi - - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi reg: maxItems: 1@@ -33,32 +33,32 @@ properties: clocks: oneOf: - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The HDMI DDC clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL clock-names: oneOf: - items: - - const: ahb - - const: mod - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 - items: - - const: ahb - - const: mod - - const: ddc - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 resets: maxItems: 1Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +29
-29@@ -35,26 +35,26 @@ properties: - const: allwinner,sun9i-a80-tcon-tv - items: - - enum: - - allwinner,sun7i-a20-tcon0 - - allwinner,sun7i-a20-tcon1 - - const: allwinner,sun7i-a20-tcon + - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon - items: - - enum: - - allwinner,sun50i-a64-tcon-lcd - - const: allwinner,sun8i-a83t-tcon-lcd + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd - items: - - enum: - - allwinner,sun8i-h3-tcon-tv - - allwinner,sun50i-a64-tcon-tv - - const: allwinner,sun8i-a83t-tcon-tv + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv - items: - - enum: - - allwinner,sun50i-h6-tcon-tv - - const: allwinner,sun8i-r40-tcon-tv + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv reg: maxItems: 1@@ -83,37 +83,37 @@ properties: resets: anyOf: - items: - - description: TCON Reset Line + - description: TCON Reset Line - items: - - description: TCON Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON LVDS Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line reset-names: oneOf: - const: lcd - items: - - const: lcd - - const: lvds + - const: lcd + - const: lvds - items: - - const: lcd - - const: edp + - const: lcd + - const: edp - items: - - const: lcd - - const: edp - - const: lvds + - const: lcd + - const: edp + - const: lvds ports: type: objectDocumentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +14
-14@@ -76,28 +76,28 @@ required: allOf: - if: properties: - compatible: - contains: - const: allwinner,sun6i-a31-mipi-dsi + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi then: - properties: - clocks: - minItems: 2 + properties: + clocks: + minItems: 2 - required: - - clock-names + required: + - clock-names - if: properties: - compatible: - contains: - const: allwinner,sun50i-a64-mipi-dsi + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi then: - properties: - clocks: - minItems: 1 + properties: + clocks: + minItems: 1 additionalProperties: falseDocumentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +5
-5@@ -29,11 +29,11 @@ properties: - const: allwinner,sun50i-h6-dw-hdmi - items: - - enum: - - allwinner,sun8i-h3-dw-hdmi - - allwinner,sun8i-r40-dw-hdmi - - allwinner,sun50i-a64-dw-hdmi - - const: allwinner,sun8i-a83t-dw-hdmi + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi reg: maxItems: 1Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +9
-9@@ -32,17 +32,17 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter - - const: lvds-encoder # Generic LVDS encoder compatible fallback + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - - enum: - - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver - - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: type: objectDocumentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +1
-1@@ -18,7 +18,7 @@ properties: reg: true reset-gpios: true vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage enforce-video-mode: true required:Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +2
-2@@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatibleDocumentation/devicetree/bindings/display/renesas,cmm.yaml +8
-8@@ -21,15 +21,15 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,r8a7795-cmm - - renesas,r8a7796-cmm - - renesas,r8a77965-cmm - - renesas,r8a77990-cmm - - renesas,r8a77995-cmm - - const: renesas,rcar-gen3-cmm + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm - items: - - const: renesas,rcar-gen2-cmm + - const: renesas,rcar-gen2-cmm reg: maxItems: 1Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +4
-4@@ -69,10 +69,10 @@ properties: maxItems: 3 reg-names: - items: - - const: gcfg - - const: rchanrt - - const: tchanrt + items: + - const: gcfg + - const: rchanrt + - const: tchanrt msi-parent: trueDocumentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +1
-1@@ -27,7 +27,7 @@ properties: gpio-controller: true '#gpio-cells': - const: 2 + const: 2 ngpios: minimum: 0Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +9
-9@@ -16,33 +16,33 @@ properties: oneOf: - items: - enum: - - samsung,exynos5250-mali + - samsung,exynos5250-mali - const: arm,mali-t604 - items: - enum: - - samsung,exynos5420-mali + - samsung,exynos5420-mali - const: arm,mali-t628 - items: - enum: - - allwinner,sun50i-h6-mali + - allwinner,sun50i-h6-mali - const: arm,mali-t720 - items: - enum: - - amlogic,meson-gxm-mali - - realtek,rtd1295-mali + - amlogic,meson-gxm-mali + - realtek,rtd1295-mali - const: arm,mali-t820 - items: - enum: - - arm,juno-mali + - arm,juno-mali - const: arm,mali-t624 - items: - enum: - - rockchip,rk3288-mali - - samsung,exynos5433-mali + - rockchip,rk3288-mali + - samsung,exynos5433-mali - const: arm,mali-t760 - items: - enum: - - rockchip,rk3399-mali + - rockchip,rk3399-mali - const: arm,mali-t860 # "arm,mali-t830"Documentation/devicetree/bindings/gpu/vivante,gc.yaml +1
-1@@ -9,7 +9,7 @@ title: Vivante GPU Bindings description: Vivante GPU core devices maintainers: - - Lucas Stach <[email protected]> + - Lucas Stach <[email protected]> properties: compatible:Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +5
-5@@ -28,14 +28,14 @@ properties: - const: rockchip,rk3399-i2c - items: - enum: - - rockchip,rk3036-i2c - - rockchip,rk3368-i2c + - rockchip,rk3036-i2c + - rockchip,rk3368-i2c - const: rockchip,rk3288-i2c - items: - enum: - - rockchip,px30-i2c - - rockchip,rk3308-i2c - - rockchip,rk3328-i2c + - rockchip,px30-i2c + - rockchip,rk3308-i2c + - rockchip,rk3328-i2c - const: rockchip,rk3399-i2c reg:Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2
-2@@ -72,8 +72,8 @@ patternProperties: The channel number. It can have up to 8 channels on ad7124-4 and 16 channels on ad7124-8, numbered from 0 to 15. items: - minimum: 0 - maximum: 15 + minimum: 0 + maximum: 15 adi,reference-select: description: |Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +3
-3@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology / Analog Devices LTC2496 ADC maintainers: - - Lars-Peter Clausen <[email protected]> - - Michael Hennerich <[email protected]> - - Stefan Popa <[email protected]> + - Lars-Peter Clausen <[email protected]> + - Michael Hennerich <[email protected]> + - Stefan Popa <[email protected]> properties: compatible:Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2
-2@@ -16,8 +16,8 @@ properties: - const: allwinner,sun4i-a10-lradc-keys - const: allwinner,sun8i-a83t-r-lradc - items: - - const: allwinner,sun50i-a64-lradc - - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc reg: maxItems: 1Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1
-1@@ -63,7 +63,7 @@ required: - interrupts examples: -- | + - | i2c { #address-cells = <1>; #size-cells = <0>;Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +2
-2@@ -10,8 +10,8 @@ maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm MSM8916 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm MSM8916 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: compatible:Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +2
-2@@ -10,8 +10,8 @@ maintainers: - Brian Masney <[email protected]> description: | - The Qualcomm MSM8974 interconnect providers support setting system - bandwidth requirements between various network-on-chip fabrics. + The Qualcomm MSM8974 interconnect providers support setting system + bandwidth requirements between various network-on-chip fabrics. properties: reg:Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +2
-2@@ -10,8 +10,8 @@ maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm QCS404 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm QCS404 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: reg:Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +6
-6@@ -27,15 +27,15 @@ properties: deprecated: true - const: allwinner,sun7i-a20-sc-nmi - items: - - const: allwinner,sun8i-a83t-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun8i-a83t-r-intc + - const: allwinner,sun6i-a31-r-intc - const: allwinner,sun9i-a80-sc-nmi - items: - - const: allwinner,sun50i-a64-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-a64-r-intc + - const: allwinner,sun6i-a31-r-intc - items: - - const: allwinner,sun50i-h6-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-h6-r-intc + - const: allwinner,sun6i-a31-r-intc reg: maxItems: 1Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +4
-4@@ -25,10 +25,10 @@ properties: compatible: items: - enum: - - intel,ixp42x-interrupt - - intel,ixp43x-interrupt - - intel,ixp45x-interrupt - - intel,ixp46x-interrupt + - intel,ixp42x-interrupt + - intel,ixp43x-interrupt + - intel,ixp45x-interrupt + - intel,ixp46x-interrupt reg: maxItems: 1Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +6
-6@@ -14,13 +14,13 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32-exti - - st,stm32h7-exti + - enum: + - st,stm32-exti + - st,stm32h7-exti - items: - - enum: - - st,stm32mp1-exti - - const: syscon + - enum: + - st,stm32mp1-exti + - const: syscon "#interrupt-cells": const: 2Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +5
-5@@ -54,13 +54,13 @@ properties: clock-names: oneOf: - items: - - const: sysmmu + - const: sysmmu - items: - - const: sysmmu - - const: master + - const: sysmmu + - const: master - items: - - const: aclk - - const: pclk + - const: aclk + - const: pclk "#iommu-cells": const: 0Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +1
-1@@ -24,7 +24,7 @@ properties: maxItems: 1 clocks: - maxItems: 1 + maxItems: 1 interrupts: items:Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +14
-14@@ -20,11 +20,11 @@ properties: - const: allwinner,sun4i-a10-csi1 - const: allwinner,sun7i-a20-csi0 - items: - - const: allwinner,sun7i-a20-csi1 - - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 - items: - - const: allwinner,sun8i-r40-csi0 - - const: allwinner,sun7i-a20-csi0 + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1@@ -35,24 +35,24 @@ properties: clocks: oneOf: - items: - - description: The CSI interface clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI DRAM clock - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: oneOf: - items: - - const: bus - - const: ram + - const: bus + - const: ram - items: - - const: bus - - const: isp - - const: ram + - const: bus + - const: isp + - const: ram resets: maxItems: 1Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +7
-7@@ -29,14 +29,14 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,gxbb-vdec # GXBB (S905) - - amlogic,gxl-vdec # GXL (S905X, S905D) - - amlogic,gxm-vdec # GXM (S912) - - const: amlogic,gx-vdec + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec - enum: - - amlogic,g12a-vdec # G12A (S905X2, S905D2) - - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) interrupts: minItems: 2Documentation/devicetree/bindings/media/renesas,ceu.yaml +14
-14@@ -32,23 +32,23 @@ properties: additionalProperties: false properties: - endpoint: - type: object - additionalProperties: false + endpoint: + type: object + additionalProperties: false # Properties described in # Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - remote-endpoint: true - hsync-active: true - vsync-active: true - field-even-active: false - bus-width: - enum: [8, 16] - default: 8 - - required: - - remote-endpoint + properties: + remote-endpoint: true + hsync-active: true + vsync-active: true + field-even-active: false + bus-width: + enum: [8, 16] + default: 8 + + required: + - remote-endpoint required: - endpointDocumentation/devicetree/bindings/media/renesas,vin.yaml +4
-4@@ -261,13 +261,13 @@ properties: anyOf: - required: - - endpoint@0 + - endpoint@0 - required: - - endpoint@1 + - endpoint@1 - required: - - endpoint@2 + - endpoint@2 - required: - - endpoint@3 + - endpoint@3 additionalProperties: falseDocumentation/devicetree/bindings/media/ti,vpe.yaml +1
-1@@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,dra7-vpe + const: ti,dra7-vpe reg: items:Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +3
-3@@ -25,9 +25,9 @@ properties: compatible: items: - enum: - - fsl,imx8mn-ddrc - - fsl,imx8mm-ddrc - - fsl,imx8mq-ddrc + - fsl,imx8mn-ddrc + - fsl,imx8mm-ddrc + - fsl,imx8mq-ddrc - const: fsl,imx8m-ddrc reg:Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +2
-2@@ -66,8 +66,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 2 + minimum: 0 + maximum: 2 required: - compatibleDocumentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2
-2@@ -102,8 +102,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 16 + minimum: 0 + maximum: 16 required: - compatibleDocumentation/devicetree/bindings/mfd/syscon.yaml +6
-6@@ -33,13 +33,13 @@ properties: compatible: anyOf: - items: - - enum: - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller - - const: syscon + - const: syscon - contains: const: sysconDocumentation/devicetree/bindings/mmc/cdns,sdhci.yaml +1
-1@@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - socionext,uniphier-sd4hc + - socionext,uniphier-sd4hc - const: cdns,sd4hc reg:Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +8
-8@@ -30,21 +30,21 @@ properties: - items: - enum: # for Rockchip PX30 - - rockchip,px30-dw-mshc + - rockchip,px30-dw-mshc # for Rockchip RK3036 - - rockchip,rk3036-dw-mshc + - rockchip,rk3036-dw-mshc # for Rockchip RK322x - - rockchip,rk3228-dw-mshc + - rockchip,rk3228-dw-mshc # for Rockchip RK3308 - - rockchip,rk3308-dw-mshc + - rockchip,rk3308-dw-mshc # for Rockchip RK3328 - - rockchip,rk3328-dw-mshc + - rockchip,rk3328-dw-mshc # for Rockchip RK3368 - - rockchip,rk3368-dw-mshc + - rockchip,rk3368-dw-mshc # for Rockchip RK3399 - - rockchip,rk3399-dw-mshc + - rockchip,rk3399-dw-mshc # for Rockchip RV1108 - - rockchip,rv1108-dw-mshc + - rockchip,rv1108-dw-mshc - const: rockchip,rk3288-dw-mshc reg:Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +7
-7@@ -35,15 +35,15 @@ properties: oneOf: - const: host - items: - - const: host - - const: bridge + - const: host + - const: bridge - items: - - const: host - - const: hw + - const: host + - const: hw - items: - - const: host - - const: bridge - - const: hw + - const: host + - const: bridge + - const: hw resets: minItems: 1Documentation/devicetree/bindings/mtd/denali,nand.yaml +2
-2@@ -54,8 +54,8 @@ properties: reg: register reset oneOf: - items: - - const: nand - - const: reg + - const: nand + - const: reg - const: nand - const: regDocumentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +2
-2@@ -19,8 +19,8 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac - - const: allwinner,sun50i-a64-emac + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac reg: maxItems: 1Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +26
-26@@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings description: Bosch MCAN controller for CAN bus maintainers: - - Sriram Dash <[email protected]> + - Sriram Dash <[email protected]> properties: compatible:@@ -51,31 +51,31 @@ properties: bosch,mram-cfg: description: | - Message RAM configuration data. - Multiple M_CAN instances can share the same Message RAM - and each element(e.g Rx FIFO or Tx Buffer and etc) number - in Message RAM is also configurable, so this property is - telling driver how the shared or private Message RAM are - used by this M_CAN controller. - - The format should be as follows: - <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> - The 'offset' is an address offset of the Message RAM where - the following elements start from. This is usually set to - 0x0 if you're using a private Message RAM. The remain cells - are used to specify how many elements are used for each FIFO/Buffer. - - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words - - Please refer to 2.4.1 Message RAM Configuration in Bosch - M_CAN user manual for details. + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. allOf: - $ref: /schemas/types.yaml#/definitions/int32-array - items:Documentation/devicetree/bindings/net/renesas,ether.yaml +2
-2@@ -40,8 +40,8 @@ properties: reg: items: - - description: E-DMAC/feLic registers - - description: TSU registers + - description: E-DMAC/feLic registers + - description: TSU registers minItems: 1 interrupts:Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +6
-6@@ -23,14 +23,14 @@ properties: oneOf: - const: ti,cpsw-switch - items: - - const: ti,am335x-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am335x-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,am4372-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am4372-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,dra7-cpsw-switch - - const: ti,cpsw-switch + - const: ti,dra7-cpsw-switch + - const: ti,cpsw-switch reg: maxItems: 1Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +13
-14@@ -18,25 +18,24 @@ allOf: properties: compatible: oneOf: - - const: ti,davinci_mdio - - items: - - const: ti,keystone_mdio - - const: ti,davinci_mdio - - items: - - const: ti,cpsw-mdio - - const: ti,davinci_mdio - - items: - - const: ti,am4372-mdio - - const: ti,cpsw-mdio - - const: ti,davinci_mdio + - const: ti,davinci_mdio + - items: + - const: ti,keystone_mdio + - const: ti,davinci_mdio + - items: + - const: ti,cpsw-mdio + - const: ti,davinci_mdio + - items: + - const: ti,am4372-mdio + - const: ti,cpsw-mdio + - const: ti,davinci_mdio reg: maxItems: 1 bus_freq: - maximum: 2500000 - description: - MDIO Bus frequency + maximum: 2500000 + description: MDIO Bus frequency ti,hwmods: description: TI hwmod nameDocumentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +1
-1@@ -23,7 +23,7 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + const: intel,lgm-emmc-phy "#phy-cells": const: 0Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +8
-8@@ -49,17 +49,17 @@ properties: are available. oneOf: - items: - - const: timers + - const: timers - items: - - const: timers - - const: pwm-tclk0 + - const: timers + - const: pwm-tclk0 - items: - - const: timers - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk1 - items: - - const: timers - - const: pwm-tclk0 - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk0 + - const: pwm-tclk1 interrupts: description:Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +1
-1@@ -25,7 +25,7 @@ properties: maxItems: 3 resets: - maxItems: 1 + maxItems: 1 st,syscfg-holdboot: allOf:Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +3
-1@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: BCM7216 RESCAL reset controller -description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216. +description: This document describes the BCM7216 RESCAL reset controller + which is responsible for controlling the reset of the SATA and PCIe0/1 + instances on BCM7216. maintainers: - Florian Fainelli <[email protected]>Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +19
-19@@ -38,10 +38,10 @@ properties: minItems: 3 maxItems: 3 description: | - Phandle/offset/mask triplet. The phandle to pwrcfg used to - access control register at offset, and change the dbp (Disable Backup - Protection) bit represented by the mask, mandatory to disable/enable backup - domain (RTC registers) write protection. + Phandle/offset/mask triplet. The phandle to pwrcfg used to + access control register at offset, and change the dbp (Disable Backup + Protection) bit represented by the mask, mandatory to disable/enable backup + domain (RTC registers) write protection. assigned-clocks: description: |@@ -78,14 +78,14 @@ allOf: const: st,stm32h7-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - required: - - clock-names - - st,syscfg + required: + - clock-names + - st,syscfg - if: properties:@@ -94,16 +94,16 @@ allOf: const: st,stm32mp1-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - assigned-clocks: false - assigned-clock-parents: false + assigned-clocks: false + assigned-clock-parents: false - required: - - clock-names + required: + - clock-names required: - compatibleDocumentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +8
-8@@ -24,18 +24,18 @@ properties: oneOf: - description: Always-on power domain UART controller items: - - enum: + - enum: + - amlogic,meson6-uart + - amlogic,meson8-uart + - amlogic,meson8b-uart + - amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart + - description: Everything-Else power domain UART controller + enum: - amlogic,meson6-uart - amlogic,meson8-uart - amlogic,meson8b-uart - amlogic,meson-gx-uart - - const: amlogic,meson-ao-uart - - description: Everything-Else power domain UART controller - enum: - - amlogic,meson6-uart - - amlogic,meson8-uart - - amlogic,meson8b-uart - - amlogic,meson-gx-uart reg: maxItems: 1Documentation/devicetree/bindings/serial/rs485.yaml +9
-8@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: RS485 serial communications Bindings -description: The RTS signal is capable of automatically controlling - line direction for the built-in half-duplex mode. - The properties described hereafter shall be given to a - half-duplex capable UART node. +description: The RTS signal is capable of automatically controlling line + direction for the built-in half-duplex mode. The properties described + hereafter shall be given to a half-duplex capable UART node. maintainers: - - Rob Herring <[email protected]> + - Rob Herring <[email protected]> properties: rs485-rts-delay:@@ -37,9 +36,11 @@ properties: $ref: /schemas/types.yaml#/definitions/flag linux,rs485-enabled-at-boot-time: - description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. + description: enables the rs485 feature at boot time. It can be disabled + later with proper ioctl. $ref: /schemas/types.yaml#/definitions/flag rs485-rx-during-tx: - description: enables the receiving of data even while sending data. - $ref: /schemas/types.yaml#/definitions/flag + description: enables the receiving of data even while sending data. + $ref: /schemas/types.yaml#/definitions/flag +...Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +5
-5@@ -26,11 +26,11 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,meson8-canvas - - amlogic,meson8b-canvas - - amlogic,meson8m2-canvas - - const: amlogic,canvas + - enum: + - amlogic,meson8-canvas + - amlogic,meson8b-canvas + - amlogic,meson8m2-canvas + - const: amlogic,canvas - const: amlogic,canvas # GXBB and newer SoCs reg:Documentation/devicetree/bindings/sound/renesas,fsi.yaml +8
-8@@ -17,16 +17,16 @@ properties: oneOf: # for FSI2 SoC - items: - - enum: - - renesas,fsi2-sh73a0 - - renesas,fsi2-r8a7740 - - enum: - - renesas,sh_fsi2 + - enum: + - renesas,fsi2-sh73a0 + - renesas,fsi2-r8a7740 + - enum: + - renesas,sh_fsi2 # for Generic - items: - - enum: - - renesas,sh_fsi - - renesas,sh_fsi2 + - enum: + - renesas,sh_fsi + - renesas,sh_fsi2 reg: maxItems: 1Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +5
-5@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya <[email protected]> - - Akash Asthana <[email protected]> + - Mukesh Savaliya <[email protected]> + - Akash Asthana <[email protected]> -description: - The QSPI controller allows SPI protocol communication in single, dual, or quad - wire transmission modes for read/write access to slaves such as NOR flash. +description: The QSPI controller allows SPI protocol communication in single, + dual, or quad wire transmission modes for read/write access to slaves such + as NOR flash. allOf: - $ref: /spi/spi-controller.yaml#Documentation/devicetree/bindings/spi/renesas,hspi.yaml +2
-2@@ -16,8 +16,8 @@ properties: compatible: items: - enum: - - renesas,hspi-r8a7778 # R-Car M1A - - renesas,hspi-r8a7779 # R-Car H1 + - renesas,hspi-r8a7778 # R-Car M1A + - renesas,hspi-r8a7779 # R-Car H1 - const: renesas,hspi reg:Documentation/devicetree/bindings/spi/spi-pl022.yaml +1
-1@@ -51,7 +51,7 @@ properties: pl022,rt: description: indicates the controller should run the message pump with realtime - priority to minimise the transfer latency on the bus (boolean) + priority to minimise the transfer latency on the bus (boolean) type: boolean dmas:Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +2
-2@@ -24,8 +24,8 @@ properties: reg-names: items: - - const: qspi - - const: qspi_mm + - const: qspi + - const: qspi_mm clocks: maxItems: 1Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +32
-32@@ -29,8 +29,8 @@ properties: - const: allwinner,sun4i-a10-system-control - const: allwinner,sun5i-a13-system-control - items: - - const: allwinner,sun7i-a20-system-control - - const: allwinner,sun4i-a10-system-control + - const: allwinner,sun7i-a20-system-control + - const: allwinner,sun4i-a10-system-control - const: allwinner,sun8i-a23-system-control - const: allwinner,sun8i-h3-system-control - const: allwinner,sun50i-a64-sram-controller@@ -38,11 +38,11 @@ properties: - const: allwinner,sun50i-a64-system-control - const: allwinner,sun50i-h5-system-control - items: - - const: allwinner,sun50i-h6-system-control - - const: allwinner,sun50i-a64-system-control + - const: allwinner,sun50i-h6-system-control + - const: allwinner,sun50i-a64-system-control - items: - - const: allwinner,suniv-f1c100s-system-control - - const: allwinner,sun4i-a10-system-control + - const: allwinner,suniv-f1c100s-system-control + - const: allwinner,sun4i-a10-system-control reg: maxItems: 1@@ -69,44 +69,44 @@ patternProperties: - const: allwinner,sun4i-a10-sram-d - const: allwinner,sun50i-a64-sram-c - items: - - const: allwinner,sun5i-a13-sram-a3-a4 - - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun5i-a13-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 - items: - - const: allwinner,sun7i-a20-sram-a3-a4 - - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun7i-a20-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 - items: - - const: allwinner,sun5i-a13-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun5i-a13-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun7i-a20-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun7i-a20-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun8i-a23-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun8i-a23-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun8i-h3-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun8i-h3-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-a64-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-a64-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-h5-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-h5-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-h6-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-h6-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun5i-a13-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun5i-a13-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,sun7i-a20-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun7i-a20-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,suniv-f1c100s-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,suniv-f1c100s-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,sun50i-h6-sram-c - - const: allwinner,sun50i-a64-sram-c + - const: allwinner,sun50i-h6-sram-c + - const: allwinner,sun50i-a64-sram-c required: - "#address-cells"Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +5
-5@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal properties: compatible: - items: - - enum: - - amlogic,g12a-cpu-thermal - - amlogic,g12a-ddr-thermal - - const: amlogic,g12a-thermal + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal reg: maxItems: 1Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +2
-2@@ -28,10 +28,10 @@ properties: - arm,armv7-timer - items: - enum: - - arm,armv7-timer + - arm,armv7-timer - items: - enum: - - arm,armv8-timer + - arm,armv8-timer interrupts: items:Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +2
-2@@ -20,7 +20,7 @@ properties: compatible: items: - enum: - - arm,armv7-timer-mem + - arm,armv7-timer-mem reg: maxItems: 1@@ -77,7 +77,7 @@ patternProperties: - description: physical timer irq - description: virtual timer irq - reg : + reg: minItems: 1 maxItems: 2 items:Documentation/devicetree/bindings/usb/dwc2.yaml +4
-5@@ -62,14 +62,14 @@ properties: resets: items: - - description: common reset - - description: ecc reset + - description: common reset + - description: ecc reset minItems: 1 reset-names: items: - - const: dwc2 - - const: dwc2-ecc + - const: dwc2 + - const: dwc2-ecc minItems: 1 phys: --2.20.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
Quoted 3,947 lines
--- .../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +- .../devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/hwmon/adi,ltc2947.yaml | 32 +-- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../bindings/iio/adc/adi,ad7124.yaml | 5 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +- .../bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++-- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +- .../devicetree/bindings/input/input.yaml | 9 +- .../interrupt-controller/arm,gic-v3.yaml | 39 ++- .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +- .../devicetree/bindings/leds/common.yaml | 13 +- .../devicetree/bindings/leds/leds-gpio.yaml | 3 +- .../bindings/leds/rohm,bd71828-leds.yaml | 10 +- .../bindings/mailbox/st,stm32-ipcc.yaml | 5 +- .../bindings/media/amlogic,gx-vdec.yaml | 6 +- .../media/amlogic,meson-gx-ao-cec.yaml | 3 +- .../devicetree/bindings/media/rc.yaml | 265 +++++++++--------- .../bindings/media/renesas,vin.yaml | 7 +- .../memory-controllers/exynos-srom.yaml | 14 +- .../nvidia,tegra124-emc.yaml | 9 +- .../nvidia,tegra124-mc.yaml | 3 +- .../nvidia,tegra30-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +- .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +- .../bindings/mfd/st,stm32-timers.yaml | 33 ++- .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +- .../devicetree/bindings/mfd/syscon.yaml | 5 +- .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++-- .../bindings/mmc/mmc-controller.yaml | 37 ++- .../bindings/mmc/rockchip-dw-mshc.yaml | 6 +- .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +- .../mtd/allwinner,sun4i-a10-nand.yaml | 13 +- .../bindings/mtd/nand-controller.yaml | 27 +- .../bindings/net/can/bosch,m_can.yaml | 59 ++-- .../bindings/net/ethernet-controller.yaml | 34 +-- .../devicetree/bindings/net/qca,ar803x.yaml | 17 +- .../devicetree/bindings/net/snps,dwmac.yaml | 22 +- .../bindings/net/ti,cpsw-switch.yaml | 3 +- .../bindings/net/ti,davinci-mdio.yaml | 7 +- .../bindings/pci/intel-gw-pcie.yaml | 7 +- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 45 ++- .../pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++--- .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 +- .../bindings/pinctrl/intel,lgm-io.yaml | 4 +- .../bindings/pinctrl/pinmux-node.yaml | 3 +- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 56 ++-- .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +- .../bindings/regulator/gpio-regulator.yaml | 35 ++- .../bindings/regulator/mps,mpq7920.yaml | 31 +- .../bindings/regulator/regulator.yaml | 5 +- .../regulator/rohm,bd71828-regulator.yaml | 34 +-- .../bindings/regulator/st,stm32-booster.yaml | 3 +- .../regulator/st,stm32mp1-pwr-reg.yaml | 3 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +- .../bindings/reset/intel,rcu-gw.yaml | 3 +- .../devicetree/bindings/riscv/cpus.yaml | 20 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +- .../devicetree/bindings/serial/pl011.yaml | 10 +- .../devicetree/bindings/serial/rs485.yaml | 26 +- .../bindings/serial/samsung_uart.yaml | 5 +- .../bindings/sound/adi,adau7118.yaml | 20 +- .../sound/allwinner,sun4i-a10-codec.yaml | 41 ++- .../bindings/sound/qcom,wcd934x.yaml | 3 +- .../bindings/spi/renesas,sh-msiof.yaml | 42 ++- .../bindings/spi/spi-controller.yaml | 14 +- .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++-- .../devicetree/bindings/spi/spi-sifive.yaml | 14 +- .../bindings/thermal/qcom-tsens.yaml | 7 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +- 91 files changed, 881 insertions(+), 1103 deletions(-)Documentation/devicetree/bindings/arm/cpus.yaml +40
-41@@ -171,49 +171,48 @@ properties: - qcom,scorpion enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: + $ref: '/schemas/types.yaml#/definitions/string' + oneOf: # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table + - enum: + - psci + - spin-table # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - aspeed,ast2600-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - marvell,mmp3-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - ti,am3352 - - ti,am4372 + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - marvell,mmp3-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + - ti,am3352 + - ti,am4372 cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64'Documentation/devicetree/bindings/arm/l2c2x0.yaml +37
-50@@ -70,43 +70,39 @@ properties: description: Cycles of latency for Data RAM accesses. Specifies 3 cells of read, write and setup latencies. Minimum valid values are 1. Controllers without setup latency control should use a value of 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 arm,tag-latency: description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of read, write and setup latencies. Controllers without setup latency control should use 0. Controllers without separate read and write Tag RAM latency values should only use the first cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8 arm,dirty-latency: description: Cycles of latency for Dirty RAMs. This is a single cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8 arm,filter-ranges: description: <start length> Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 arm,io-coherent: description: indicates that the system is operating in an hardware@@ -131,36 +127,31 @@ properties: arm,double-linefill: description: Override double linefill enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,double-linefill-incr: description: Override double linefill on INCR read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,double-linefill-wrap: description: Override double linefill on WRAP read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,prefetch-drop: description: Override prefetch drop enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,prefetch-offset: description: Override prefetch offset value. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31] arm,shared-override: description: The default behavior of the L220 or PL310 cache@@ -193,35 +184,31 @@ properties: description: | Data prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] prefetch-instr: description: | Instruction prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,dynamic-clock-gating: description: | L2 dynamic clock gating. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,standby-mode: description: L2 standby mode enable. Value <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,early-bresp-disable: description: Disable the CA9 optimization Early BRESP (PL310)Documentation/devicetree/bindings/arm/psci.yaml +7
-8@@ -69,13 +69,12 @@ properties: method: description: The method of calling the PSCI firmware. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - enum: - # SMC #0, with the register assignments specified in this binding. - - smc + $ref: /schemas/types.yaml#/definitions/string-array + enum: + + - smc # HVC #0, with the register assignments specified in this binding. - - hvc + - hvc cpu_suspend: $ref: /schemas/types.yaml#/definitions/uint32@@ -107,8 +106,8 @@ properties: patternProperties: "^power-domain-": - allOf: - - $ref: "../power/power-domain.yaml#" + $ref: "../power/power-domain.yaml#" + type: object description: | ARM systems can have multiple cores, sometimes in an hierarchicalDocumentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2
-3@@ -22,9 +22,8 @@ properties: Adaptive Supply Voltage bin selection. This can be used to determine the ASV bin of an SoC if respective information is missing in the CHIPID registers or in the OTP memory. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - compatibleDocumentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +2
-3@@ -31,12 +31,11 @@ properties: maxItems: 1 allwinner,sram: - allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array - - maxItems: 1 description: The SRAM that needs to be claimed to access the display engine bus. + $ref: /schemas/types.yaml#definitions/phandle-array + maxItems: 1 ranges: trueDocumentation/devicetree/bindings/clock/fixed-factor-clock.yaml +2
-3@@ -24,9 +24,8 @@ properties: clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 clock-mult: description: Fixed multiplierDocumentation/devicetree/bindings/connector/usb-connector.yaml +13
-15@@ -27,8 +27,8 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - mini - micro@@ -57,8 +57,8 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - source - sink@@ -66,18 +66,18 @@ properties: try-power-role: description: Preferred power role. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - - source - - sink - - dual + - source + - sink + - dual data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - host - device@@ -95,8 +95,7 @@ properties: defined in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array sink-pdos: description: An array of u32 with each entry providing supported power sink@@ -108,8 +107,7 @@ properties: in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array op-sink-microwatt: description: Sink required operating power in microwatt, if source can'tDocumentation/devicetree/bindings/crypto/st,stm32-hash.yaml +4
-5@@ -36,11 +36,10 @@ properties: dma-maxburst: description: Set number of maximum dma burst supported - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 2 - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 required: - compatibleDocumentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +3
-4@@ -66,10 +66,9 @@ properties: - allwinner,sun50i-h6-display-engine allwinner,pipelines: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available.Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +2
-3@@ -71,11 +71,10 @@ properties: maxItems: 4 clock-output-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - maxItems: 1 description: Name of the LCD pixel clock created. + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 dmas: maxItems: 1Documentation/devicetree/bindings/display/panel/panel-common.yaml +2
-3@@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 90, 180, 270 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270] # Display Timings panel-timing:Documentation/devicetree/bindings/dma/dma-common.yaml +1
-2@@ -31,8 +31,7 @@ properties: kernel. i.e. first channel corresponds to LSB. The first item in the array is for channels 0-31, the second is for channels 32-63, etc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 1 # Should be enoughDocumentation/devicetree/bindings/dma/ti/k3-udma.yaml +6
-12@@ -78,25 +78,21 @@ properties: ti,sci: description: phandle to TI-SCI compatible System controller node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-dev-id: description: TI-SCI device id of UDMAP - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 ti,ringacc: description: phandle to the ring accelerator node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-rm-range-tchan: description: | Array of UDMA tchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255@@ -105,8 +101,7 @@ properties: description: | Array of UDMA rchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255@@ -115,8 +110,7 @@ properties: description: | Array of UDMA rflow resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255Documentation/devicetree/bindings/eeprom/at24.yaml +4
-7@@ -118,14 +118,13 @@ properties: maxItems: 1 pagesize: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The length of the pagesize for writing. Please consult the manual of your device, that value varies a lot. A wrong value may result in data loss! If not specified, a safety value of '1' is used which will be very slow. - enum: [ 1, 8, 16, 32, 64, 128, 258 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 8, 16, 32, 64, 128, 258] default: 1 read-only:@@ -148,18 +147,16 @@ properties: wp-gpios: true address-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of address bits. + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 enum: [ 8, 16 ] num-addresses: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Total number of i2c slave addresses this device takes. + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 minimum: 1 maximum: 8Documentation/devicetree/bindings/example-schema.yaml +6
-11@@ -138,12 +138,8 @@ properties: # 'description'. vendor,int-property: description: Vendor specific properties must have a description - # 'allOf' is the json-schema way of subclassing a schema. Here the base - # type schema is referenced and then additional constraints on the values - # are added. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 4, 6, 8, 10] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10] vendor,bool-property: description: Vendor specific properties must have a description. Boolean@@ -154,11 +150,10 @@ properties: vendor,string-array-property: description: Vendor specific properties should reference a type in the core schema. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - - enum: [ foo, bar ] - - enum: [ baz, boo ] + $ref: /schemas/types.yaml#/definitions/string-array + items: + - enum: [foo, bar] + - enum: [baz, boo] vendor,property-in-standard-units-microvolt: description: Vendor specific properties having a standard unit suffixDocumentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +14
-18@@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0@@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0@@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 required: - compatibleDocumentation/devicetree/bindings/hwmon/ti,tmp513.yaml +9
-12@@ -45,16 +45,14 @@ properties: The gain value for the PGA function. This is 8, 4, 2 or 1. The PGA gain affect the shunt voltage range. The range will be equal to: pga-gain * 40mV - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] default: 8 ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000@@ -63,14 +61,13 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - default: 0x00 - minimum: 0x00 - maximum: 0xFF + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF required: - compatibleDocumentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +4
-5@@ -30,11 +30,10 @@ allOf: Fast Mode Plus speed is selected by slave. Format is phandle to syscfg / register offset within syscfg / register bitmask for FMP bit. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 - if: properties:Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2
-3@@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txtDocumentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +1
-2@@ -18,8 +18,7 @@ properties: vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle reg: description: spi chipselect number according to the usual spi bindingsDocumentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +3
-4@@ -38,10 +38,9 @@ properties: microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 vref-supply: description: |Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +13
-18@@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: |@@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 "#io-channel-cells": const: 1@@ -129,9 +126,8 @@ patternProperties: - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [SPI_R, SPI_F, MANCH_R, MANCH_F] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: |@@ -141,9 +137,8 @@ patternProperties: - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description:Documentation/devicetree/bindings/iio/light/tsl2772.yaml +6
-7@@ -33,13 +33,12 @@ properties: amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 interrupts: maxItems: 1Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +21
-35@@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 '#address-cells': const: 1@@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9@@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items:@@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended:@@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18@@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] adi,rsense-share: description:@@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64@@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27@@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] adi,custom-thermistor: description:@@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items:@@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6@@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended:@@ -379,8 +366,7 @@ patternProperties: adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms:Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2
-3@@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to voltage:Documentation/devicetree/bindings/input/input.yaml +4
-5@@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff poll-interval: description: Poll interval time in milliseconds.Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +17
-22@@ -91,18 +91,16 @@ properties: description: If using padding pages, specifies the stride of consecutive redistributors. Must be a multiple of 64kB. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64 - - multipleOf: 0x10000 - exclusiveMinimum: 0 + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0 "#redistributor-regions": description: The number of independent contiguous regions occupied by the redistributors. Required if more than one such region is present. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 4096 # Should be enough? + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096 msi-controller: description:@@ -114,22 +112,20 @@ properties: A list of pairs <intid span>, where "intid" is the first SPI of a range that can be used an MBI, and "span" the size of that range. Multiple ranges can be provided. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 mbi-alias: description: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2 ppi-partitions: type: object@@ -188,11 +184,10 @@ patternProperties: description: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 required: - compatibleDocumentation/devicetree/bindings/iommu/arm,smmu.yaml +1
-2@@ -56,8 +56,7 @@ properties: '#global-interrupts': description: The number of global interrupts exposed by the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf countersDocumentation/devicetree/bindings/leds/common.yaml +5
-8@@ -41,8 +41,7 @@ properties: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 maximum: 8@@ -67,8 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string enum: - on - off@@ -79,8 +77,8 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: # LED will act as a back-light, controlled by the framebuffer system - backlight@@ -111,8 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#definitions/uint32-matrix items: minItems: 2 maxItems: 2Documentation/devicetree/bindings/leds/leds-gpio.yaml +1
-2@@ -24,8 +24,7 @@ patternProperties: "(^led-[0-9a-f]$|led)": type: object - allOf: - - $ref: common.yaml# + $ref: common.yaml# properties: gpios:Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +5
-5@@ -34,11 +34,11 @@ patternProperties: #- $ref: "common.yaml#" rohm,led-compatible: description: LED identification string - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - bd71828-ambled - - bd71828-grnled + $ref: "/schemas/types.yaml#/definitions/string" + enum: + + - bd71828-ambled + - bd71828-grnled function: description: Purpose of LED as defined in dt-bindings/leds/common.hDocumentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +2
-3@@ -49,9 +49,8 @@ properties: st,proc-id: description: Processor id using the mailbox (0 or 1) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] required: - compatibleDocumentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +2
-4@@ -77,13 +77,11 @@ properties: amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle amlogic,canvas: description: should point to a canvas provider node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if:Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +1
-2@@ -35,8 +35,7 @@ properties: hdmi-phandle: description: phandle to the HDMI controller - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if:Documentation/devicetree/bindings/media/rc.yaml +132
-133@@ -18,136 +18,135 @@ properties: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rc-adstech-dvb-t-pci - - rc-alink-dtu-m - - rc-anysee - - rc-apac-viewcomp - - rc-astrometa-t2hybrid - - rc-asus-pc39 - - rc-asus-ps3-100 - - rc-ati-tv-wonder-hd-600 - - rc-ati-x10 - - rc-avermedia - - rc-avermedia-a16d - - rc-avermedia-cardbus - - rc-avermedia-dvbt - - rc-avermedia-m135a - - rc-avermedia-m733a-rm-k6 - - rc-avermedia-rm-ks - - rc-avertv-303 - - rc-azurewave-ad-tu700 - - rc-beelink-gs1 - - rc-behold - - rc-behold-columbus - - rc-budget-ci-old - - rc-cec - - rc-cinergy - - rc-cinergy-1400 - - rc-d680-dmb - - rc-delock-61959 - - rc-dib0700-nec - - rc-dib0700-rc5 - - rc-digitalnow-tinytwin - - rc-digittrade - - rc-dm1105-nec - - rc-dntv-live-dvb-t - - rc-dntv-live-dvbt-pro - - rc-dtt200u - - rc-dvbsky - - rc-dvico-mce - - rc-dvico-portable - - rc-em-terratec - - rc-empty - - rc-encore-enltv - - rc-encore-enltv-fm53 - - rc-encore-enltv2 - - rc-evga-indtube - - rc-eztv - - rc-flydvb - - rc-flyvideo - - rc-fusionhdtv-mce - - rc-gadmei-rm008z - - rc-geekbox - - rc-genius-tvgo-a11mce - - rc-gotview7135 - - rc-hauppauge - - rc-hisi-poplar - - rc-hisi-tv-demo - - rc-imon-mce - - rc-imon-pad - - rc-imon-rsc - - rc-iodata-bctv7e - - rc-it913x-v1 - - rc-it913x-v2 - - rc-kaiomy - - rc-khadas - - rc-kworld-315u - - rc-kworld-pc150u - - rc-kworld-plus-tv-analog - - rc-leadtek-y04g0051 - - rc-lme2510 - - rc-manli - - rc-medion-x10 - - rc-medion-x10-digitainer - - rc-medion-x10-or2x - - rc-msi-digivox-ii - - rc-msi-digivox-iii - - rc-msi-tvanywhere - - rc-msi-tvanywhere-plus - - rc-nebula - - rc-nec-terratec-cinergy-xs - - rc-norwood - - rc-npgtech - - rc-odroid - - rc-pctv-sedna - - rc-pinnacle-color - - rc-pinnacle-grey - - rc-pinnacle-pctv-hd - - rc-pixelview - - rc-pixelview-002t - - rc-pixelview-mk12 - - rc-pixelview-new - - rc-powercolor-real-angel - - rc-proteus-2309 - - rc-purpletv - - rc-pv951 - - rc-rc5-tv - - rc-rc6-mce - - rc-real-audio-220-32-keys - - rc-reddo - - rc-snapstream-firefly - - rc-streamzap - - rc-su3000 - - rc-tango - - rc-tanix-tx3mini - - rc-tanix-tx5max - - rc-tbs-nec - - rc-technisat-ts35 - - rc-technisat-usb2 - - rc-terratec-cinergy-c-pci - - rc-terratec-cinergy-s2-hd - - rc-terratec-cinergy-xs - - rc-terratec-slim - - rc-terratec-slim-2 - - rc-tevii-nec - - rc-tivo - - rc-total-media-in-hand - - rc-total-media-in-hand-02 - - rc-trekstor - - rc-tt-1500 - - rc-twinhan-dtv-cab-ci - - rc-twinhan1027 - - rc-videomate-k100 - - rc-videomate-s350 - - rc-videomate-tv-pvr - - rc-videostrong-kii-pro - - rc-wetek-hub - - rc-wetek-play2 - - rc-winfast - - rc-winfast-usbii-deluxe - - rc-x96max - - rc-xbox-dvd - - rc-zx-irdec + $ref: '/schemas/types.yaml#/definitions/string' + enum: + - rc-adstech-dvb-t-pci + - rc-alink-dtu-m + - rc-anysee + - rc-apac-viewcomp + - rc-astrometa-t2hybrid + - rc-asus-pc39 + - rc-asus-ps3-100 + - rc-ati-tv-wonder-hd-600 + - rc-ati-x10 + - rc-avermedia + - rc-avermedia-a16d + - rc-avermedia-cardbus + - rc-avermedia-dvbt + - rc-avermedia-m135a + - rc-avermedia-m733a-rm-k6 + - rc-avermedia-rm-ks + - rc-avertv-303 + - rc-azurewave-ad-tu700 + - rc-beelink-gs1 + - rc-behold + - rc-behold-columbus + - rc-budget-ci-old + - rc-cec + - rc-cinergy + - rc-cinergy-1400 + - rc-d680-dmb + - rc-delock-61959 + - rc-dib0700-nec + - rc-dib0700-rc5 + - rc-digitalnow-tinytwin + - rc-digittrade + - rc-dm1105-nec + - rc-dntv-live-dvb-t + - rc-dntv-live-dvbt-pro + - rc-dtt200u + - rc-dvbsky + - rc-dvico-mce + - rc-dvico-portable + - rc-em-terratec + - rc-empty + - rc-encore-enltv + - rc-encore-enltv-fm53 + - rc-encore-enltv2 + - rc-evga-indtube + - rc-eztv + - rc-flydvb + - rc-flyvideo + - rc-fusionhdtv-mce + - rc-gadmei-rm008z + - rc-geekbox + - rc-genius-tvgo-a11mce + - rc-gotview7135 + - rc-hauppauge + - rc-hisi-poplar + - rc-hisi-tv-demo + - rc-imon-mce + - rc-imon-pad + - rc-imon-rsc + - rc-iodata-bctv7e + - rc-it913x-v1 + - rc-it913x-v2 + - rc-kaiomy + - rc-khadas + - rc-kworld-315u + - rc-kworld-pc150u + - rc-kworld-plus-tv-analog + - rc-leadtek-y04g0051 + - rc-lme2510 + - rc-manli + - rc-medion-x10 + - rc-medion-x10-digitainer + - rc-medion-x10-or2x + - rc-msi-digivox-ii + - rc-msi-digivox-iii + - rc-msi-tvanywhere + - rc-msi-tvanywhere-plus + - rc-nebula + - rc-nec-terratec-cinergy-xs + - rc-norwood + - rc-npgtech + - rc-odroid + - rc-pctv-sedna + - rc-pinnacle-color + - rc-pinnacle-grey + - rc-pinnacle-pctv-hd + - rc-pixelview + - rc-pixelview-002t + - rc-pixelview-mk12 + - rc-pixelview-new + - rc-powercolor-real-angel + - rc-proteus-2309 + - rc-purpletv + - rc-pv951 + - rc-rc5-tv + - rc-rc6-mce + - rc-real-audio-220-32-keys + - rc-reddo + - rc-snapstream-firefly + - rc-streamzap + - rc-su3000 + - rc-tango + - rc-tanix-tx3mini + - rc-tanix-tx5max + - rc-tbs-nec + - rc-technisat-ts35 + - rc-technisat-usb2 + - rc-terratec-cinergy-c-pci + - rc-terratec-cinergy-s2-hd + - rc-terratec-cinergy-xs + - rc-terratec-slim + - rc-terratec-slim-2 + - rc-tevii-nec + - rc-tivo + - rc-total-media-in-hand + - rc-total-media-in-hand-02 + - rc-trekstor + - rc-tt-1500 + - rc-twinhan-dtv-cab-ci + - rc-twinhan1027 + - rc-videomate-k100 + - rc-videomate-s350 + - rc-videomate-tv-pvr + - rc-videostrong-kii-pro + - rc-wetek-hub + - rc-wetek-play2 + - rc-winfast + - rc-winfast-usbii-deluxe + - rc-x96max + - rc-xbox-dvd + - rc-zx-irdecDocumentation/devicetree/bindings/media/renesas,vin.yaml +3
-4@@ -116,10 +116,9 @@ properties: #The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 ports: type: objectDocumentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +6
-8@@ -51,11 +51,10 @@ patternProperties: maxItems: 1 reg-io-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2] description: Data width in bytes (1 or 2). If omitted, default of 1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] samsung,srom-page-mode: description:@@ -64,11 +63,10 @@ patternProperties: type: boolean samsung,srom-timing: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 6 - maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +3
-6@@ -73,10 +73,9 @@ patternProperties: timings nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: pad calibration interval in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151@@ -136,11 +135,10 @@ patternProperties: value of the EMC_XM2DQSPADCTRL2 register for this set of timings nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: number of EMC clocks to wait before issuing any commands after clock change + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023@@ -150,12 +148,11 @@ patternProperties: value of the EMC_ZCAL_INTERVAL register for this set of timings nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFCDocumentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +1
-2@@ -60,8 +60,7 @@ patternProperties: maximum: 1066000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM.Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +3
-6@@ -56,10 +56,9 @@ patternProperties: maximum: 900000000 nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151@@ -79,11 +78,10 @@ patternProperties: Mode Register 0. nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023@@ -98,12 +96,11 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled. nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFCDocumentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +1
-2@@ -77,8 +77,7 @@ patternProperties: maximum: 900000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM.Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +10
-10@@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller allwinner,tp-sensitive-adjust: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection allwinner,filter-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + description: | Select median and averaging filter. Sample used for median / averaging filter:Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +16
-17@@ -67,23 +67,22 @@ properties: description: One or two <index level filter> to describe break input configurations. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "index" indicates on which break input (0 or 1) the - configuration should be applied. - enum: [ 0 , 1] - - description: | - "level" gives the active level (0=low or 1=high) of the - input signal for this configuration - enum: [ 0, 1 ] - - description: | - "filter" gives the filtering value (up to 15) to be applied. - maximum: 15 - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 required: - "#pwm-cells"Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +3
-6@@ -29,8 +29,7 @@ properties: onkey: type: object - allOf: - - $ref: ../input/input.yaml + $ref: ../input/input.yaml properties: compatible:@@ -68,8 +67,7 @@ properties: watchdog: type: object - allOf: - - $ref: ../watchdog/watchdog.yaml + $ref: ../watchdog/watchdog.yaml properties: compatible:@@ -190,8 +188,7 @@ properties: description: STPMIC1 voltage regulators supplies "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - allOf: - - $ref: ../regulator/regulator.yaml + $ref: ../regulator/regulator.yaml "^ldo[1-2,5-6]$": type: objectDocumentation/devicetree/bindings/mfd/syscon.yaml +2
-3@@ -52,9 +52,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] hwlocks: maxItems: 1Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +2
-2@@ -41,8 +41,8 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object - allOf: - - $ref: mmc-controller.yaml + $ref: mmc-controller.yaml + properties: compatible: enum:Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +33
-44@@ -36,91 +36,80 @@ properties: cdns,phy-input-delay-sd-highspeed: description: Value of the delay in the input path for SD high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-legacy: description: Value of the delay in the input path for legacy timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr12: description: Value of the delay in the input path for SD UHS SDR12 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr25: description: Value of the delay in the input path for SD UHS SDR25 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr50: description: Value of the delay in the input path for SD UHS SDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-ddr50: description: Value of the delay in the input path for SD UHS DDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-mmc-highspeed: description: Value of the delay in the input path for MMC high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-mmc-ddr: description: Value of the delay in the input path for eMMC high-speed DDR timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f # PHY DLL clock delays: # Each delay property represents the fraction of the clock period. # The approximate delay value will be # (<delay property value>/128)*sdmclk_clock_period. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-dll-delay-sdclk: description: | Value of the delay introduced on the sdclk output for all modes except HS200, HS400 and HS400_ES. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f cdns,phy-dll-delay-sdclk-hsmmc: description: | Value of the delay introduced on the sdclk output for HS200, HS400 and HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f cdns,phy-dll-delay-strobe: description: | Value of the delay introduced on the dat_strobe input used in HS400 / HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f required: - compatibleDocumentation/devicetree/bindings/mmc/mmc-controller.yaml +16
-21@@ -76,20 +76,18 @@ properties: # Other properties bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - default: 1 description: Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1 max-frequency: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 400000 - - maximum: 200000000 description: Maximum operating frequency of the bus. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 200000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag@@ -212,13 +210,12 @@ properties: eMMC HS400 enhanced strobe mode is supported dsr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 0xffff description: Value the card Driver Stage Register (DSR) should be programmed with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff no-sdio: $ref: /schemas/types.yaml#/definitions/flag@@ -238,25 +235,23 @@ properties: initialization. fixed-emmc-driver-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 4 description: For non-removable eMMC, enforce this driver type. The value is the driver type as specified in the eMMC specification (table 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 post-power-on-delay-ms: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 10 description: It was invented for MMC pwrseq-simple which could be referred to mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 10 supports-cqe: $ref: /schemas/types.yaml#/definitions/flag@@ -333,8 +328,8 @@ patternProperties: - reg "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 maxItems: 2 items:Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +2
-4@@ -76,8 +76,7 @@ properties: high speed modes. rockchip,default-sample-phase: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 0@@ -87,8 +86,7 @@ properties: If not specified 0 deg will be used. rockchip,desired-num-phases: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 360Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +5
-9@@ -27,39 +27,35 @@ properties: clock to this at probe time. fifo-depth: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The maximum size of the tx/rx fifo's. If this property is not specified, the default value of the fifo size is determined from the controller registers. + $ref: /schemas/types.yaml#/definitions/uint32 card-detect-delay: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 description: Delay in milli-seconds before detecting card after card insert event. The default value is 0. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 data-addr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Override fifo address with value provided by DT. The default FIFO reg offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by driver. If the controller does not follow this rule, please use this property to set fifo address in device tree. + $ref: /schemas/types.yaml#/definitions/uint32 fifo-watermark-aligned: - allOf: - - $ref: /schemas/types.yaml#/definitions/flag description: Data done irq is expected if data length is less than watermark in PIO mode. But fifo watermark is requested to be aligned with data length in some SoC so that TX/RX irq can be generated with data done irq. Add this watermark quirk to mark this requirement and force fifo watermark setting accordingly. + $ref: /schemas/types.yaml#/definitions/flag dmas: maxItems: 1Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +6
-7@@ -75,13 +75,12 @@ patternProperties: allwinner,rb: description: Contains the native Ready/Busy IDs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 additionalProperties: falseDocumentation/devicetree/bindings/mtd/nand-controller.yaml +11
-16@@ -47,29 +47,26 @@ patternProperties: Contains the native Ready/Busy IDs. nand-ecc-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ] description: Desired ECC engine, either hardware (most of the time embedded in the NAND controller) or software correction (Linux will handle the calculations). soft_bch is deprecated and should be replaced by soft and nand-ecc-algo. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die] nand-ecc-algo: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ hamming, bch, rs ] description: Desired ECC algorithm. + $ref: /schemas/types.yaml#/definitions/string + enum: [hamming, bch, rs] nand-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 16 ] - - default: 8 description: Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 nand-on-flash-bbt: $ref: /schemas/types.yaml#/definitions/flag@@ -83,18 +80,16 @@ patternProperties: build a volatile BBT in RAM. nand-ecc-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Maximum number of bits that can be corrected per ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-step-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Number of data bytes covered by a single ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-maximize: $ref: /schemas/types.yaml#/definitions/flagDocumentation/devicetree/bindings/net/can/bosch,m_can.yaml +29
-30@@ -76,36 +76,35 @@ properties: Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. - allOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - - items: - items: - - description: The 'offset' is an address offset of the Message RAM - where the following elements start from. This is usually - set to 0x0 if you're using a private Message RAM. - default: 0 - - description: 11-bit Filter 0-128 elements / 0-128 words - minimum: 0 - maximum: 128 - - description: 29-bit Filter 0-64 elements / 0-128 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 0 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 1 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx Buffers 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Tx Event FIFO 0-32 elements / 0-64 words - minimum: 0 - maximum: 32 - - description: Tx Buffers 0-32 elements / 0-576 words - minimum: 0 - maximum: 32 - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/int32-array + items: + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 can-transceiver: $ref: can-transceiver.yaml#Documentation/devicetree/bindings/net/ethernet-controller.yaml +15
-19@@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$" local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 max-frame-size: $ref: /schemas/types.yaml#definitions/uint32@@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes. managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#definitions/string + default: auto + enum: + - auto + - in-band-status fixed-link: allOf:@@ -183,11 +180,10 @@ properties: then: properties: speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] description: Link speed. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [10, 100, 1000] full-duplex: $ref: /schemas/types.yaml#definitions/flagDocumentation/devicetree/bindings/net/qca,ar803x.yaml +6
-11@@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] qca,keep-pll-enabled: description: |@@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml - + $ref: /schemas/regulator/regulator.yaml examples: - |Documentation/devicetree/bindings/net/snps,dwmac.yaml +9
-13@@ -199,14 +199,13 @@ properties: snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 3 + maxItems: 3 snps,aal: $ref: /schemas/types.yaml#definitions/flag@@ -301,27 +300,24 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flagDocumentation/devicetree/bindings/net/ti,cpsw-switch.yaml +1
-2@@ -150,10 +150,9 @@ properties: patternProperties: "^mdio@": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. + $ref: "ti,davinci-mdio.yaml#" required:Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +3
-4@@ -40,10 +40,9 @@ properties: ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio if: properties:Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +3
-4@@ -71,10 +71,9 @@ properties: max-link-speed: description: Specify PCI Gen for link capability. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 3, 4 ] - - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 bus-range: description: Range of bus numbers associated with this controller.Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +5
-7@@ -84,13 +84,12 @@ properties: gpio-line-names: true input-debounce: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 5 description: Debouncing periods in microseconds, one period per interrupt bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 5 patternProperties: # It's pretty scary, but the basic idea is that:@@ -115,9 +114,8 @@ patternProperties: bias-pull-down: true drive-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 10, 20, 30, 40 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 20, 30, 40] required: - pinsDocumentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +17
-20@@ -33,26 +33,23 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, - GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, - I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, - LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, - NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3, - PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16, - ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4, - SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, - SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, - TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, - USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30, - VPO12, VPO24, WDTRST1, WDTRST2 ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatibleDocumentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +21
-24@@ -29,8 +29,8 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon"@@ -43,28 +43,25 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, - GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, - I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, - LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST, - LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1, - RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, - SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, - SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, - SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, - TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD, - USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1, - WDTRST2, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] required: - compatibleDocumentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +51
-57@@ -30,64 +30,58 @@ patternProperties: then: properties: function: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, - ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, - GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, - I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, - I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, - MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, - PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, - RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, - SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, - SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, - UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, - WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + groups: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, - EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, - FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, - GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, - GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, - I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, - I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, - LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4, - MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, - NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, - PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, - PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, - PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, - RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, - SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, - SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, - SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, - SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, - UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA, - USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] required: - compatibleDocumentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +15
-16@@ -37,22 +37,21 @@ patternProperties: be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pinsDocumentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +1
-3@@ -24,12 +24,10 @@ properties: patternProperties: '-pins$': type: object - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml# properties: function: trueDocumentation/devicetree/bindings/pinctrl/pinmux-node.yaml +1
-2@@ -122,11 +122,10 @@ properties: this, "pins" or "pinmux" has to be specified) pinmux: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: The list of numeric pin ids and their mux settings that properties in the node apply to (either this, "pins" or "groups" have to be specified) + $ref: /schemas/types.yaml#/definitions/uint32-array pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-arrayDocumentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +25
-31@@ -37,21 +37,18 @@ properties: hwlocks: true st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Should be phandle/offset/mask - Phandle to the syscon node which includes IRQ mux selection. - The offset of the IRQ mux selection register. - The field mask of IRQ mux, needed if different of 0xf. + $ref: "/schemas/types.yaml#/definitions/phandle-array" st,package: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4, 8] description: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h - + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] patternProperties: '^gpio@[0-9a-f]*$':@@ -78,33 +75,31 @@ patternProperties: maximum: 16 st,bank-name: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - GPIOA - - GPIOB - - GPIOC - - GPIOD - - GPIOE - - GPIOF - - GPIOG - - GPIOH - - GPIOI - - GPIOJ - - GPIOK - - GPIOZ description: Should be a name string for this bank as specified in the datasheet. + $ref: "/schemas/types.yaml#/definitions/string" + enum: - st,bank-ioport: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 11 + - GPIOA + - GPIOB + - GPIOC + - GPIOD + - GPIOE + - GPIOF + - GPIOG + - GPIOH + - GPIOI + - GPIOJ + - GPIOK + - GPIOZ + st,bank-ioport: description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 11 required: - gpio-controller@@ -125,8 +120,8 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: "/schemas/types.yaml#/definitions/uint32-array" + description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are@@ -180,9 +175,8 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - pinmuxDocumentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +1
-2@@ -56,8 +56,7 @@ properties: amlogic,ao-sysctrl: description: phandle to the AO sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle required: - compatibleDocumentation/devicetree/bindings/pwm/pwm-samsung.yaml +5
-6@@ -78,12 +78,11 @@ properties: A list of PWM channels used as PWM outputs on particular platform. It is an array of up to 5 elements being indices of PWM channels (from 0 to 4), the order does not matter. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - uniqueItems: true - - items: - minimum: 0 - maximum: 4 + $ref: /schemas/types.yaml#/definitions/uint32-array + uniqueItems: true + items: + minimum: 0 + maximum: 4 required: - clocksDocumentation/devicetree/bindings/regulator/gpio-regulator.yaml +16
-19@@ -46,24 +46,22 @@ properties: 0: LOW 1: HIGH Default is LOW if nothing else is specified. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 8 - items: - enum: [ 0, 1 ] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0 states: description: Selection of available voltages/currents provided by this regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - maxItems: 8 - items: - items: - - description: Voltage in microvolts - - description: GPIO group state value + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value startup-delay-us: description: startup time in microseconds@@ -81,12 +79,11 @@ properties: regulator-type: description: Specifies what is being regulated. - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: - - voltage - - current - default: voltage + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage required: - compatibleDocumentation/devicetree/bindings/regulator/mps,mpq7920.yaml +14
-17@@ -21,17 +21,17 @@ properties: regulators: type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# + description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] properties: mps,switch-freq: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value@@ -40,32 +40,29 @@ properties: patternProperties: "^ldo[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^ldortc$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^buck[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# properties: mps,buck-softstart: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270degDocumentation/devicetree/bindings/regulator/regulator.yaml +2
-3@@ -123,9 +123,8 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkageDocumentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +14
-20@@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single LDO regulator. + $ref: regulator.yaml# properties: regulator-name:@@ -37,10 +36,9 @@ patternProperties: "^BUCK[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single BUCK regulator. + $ref: regulator.yaml# properties: regulator-name:@@ -49,40 +47,36 @@ patternProperties: should be "buck1", ..., "buck7" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-lpsr-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 # Supported default DVS states: # buck | run | idle | suspend | lpsrDocumentation/devicetree/bindings/regulator/st,stm32-booster.yaml +1
-2@@ -23,8 +23,7 @@ properties: - st,stm32mp1-booster st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: phandle to system configuration controller. vdda-supply:Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +1
-2@@ -26,8 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" required: - compatibleDocumentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +3
-6@@ -28,22 +28,20 @@ properties: maxItems: 1 st,syscfg-holdboot: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: remote processor reset hold boot - Phandle of syscon block. - The offset of the hold boot setting register. - The field mask of the hold boot. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 st,syscfg-tz: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Reference to the system configuration which holds the RCC trust zone mode - Phandle of syscon block. - The offset of the RCC trust zone mode register. - The field mask of the RCC trust zone mode. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 interrupts:@@ -90,8 +88,7 @@ properties: (see ../reserved-memory/reserved-memory.txt) st,syscfg-pdds: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote 1st cell: phandle to syscon blockDocumentation/devicetree/bindings/reset/intel,rcu-gw.yaml +1
-2@@ -21,8 +21,7 @@ properties: intel,global-reset: description: Global reset register offset and bit offset. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: Register offset - description: Register bit offsetDocumentation/devicetree/bindings/riscv/cpus.yaml +9
-11@@ -40,24 +40,18 @@ properties: and identifies the type of the hart. mmu-type: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - riscv,sv32 - - riscv,sv39 - - riscv,sv48 description: Identifies the MMU address translation mode used on this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48 riscv,isa: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - rv64imac - - rv64imafdc description: Identifies the specific RISC-V instruction set architecture supported by the hart. These are documented in the RISC-V@@ -67,6 +61,10 @@ properties: While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - rv64imac + - rv64imafdc # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: falseDocumentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +4
-5@@ -32,11 +32,10 @@ properties: maxItems: 1 st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 description: | Phandle/offset/mask triplet. The phandle to pwrcfg used to access control register at offset, and change the dbp (Disable BackupDocumentation/devicetree/bindings/serial/pl011.yaml +4
-6@@ -88,17 +88,15 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 3000 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3000 required: - compatibleDocumentation/devicetree/bindings/serial/rs485.yaml +12
-14@@ -16,20 +16,18 @@ maintainers: properties: rs485-rts-delay: description: prop-encoded-array <a b> - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - items: - - description: - Delay between rts signal and beginning of data sent in milliseconds. - It corresponds to the delay before sending data. - default: 0 - maximum: 1000 - - description: - Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release of the line. - default: 0 - maximum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + items: + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 1000Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/serial/samsung_uart.yaml +2
-3Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/sound/adi,adau7118.yaml +9
-11Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +20
-21Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +1
-2Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +19
-23Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/spi/spi-controller.yaml +6
-8Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/spi/spi-pl022.yaml +24
-31Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/spi/spi-sifive.yaml +6
-8Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +3
-4Lines of this file are not shown. View the raw message.
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +3
-5Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
2.20.1
Signature · 7 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Part of the diff is not shown here. View the raw message.
Hi Rob.
Quoted 4 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Are there any plans to improve the tooling so we get warnigns for this? Otherwise I am afraid we will see a lot of patches that gets this wrong.
As a follow-up patch it would be good if example-schema.yaml could gain some comments about the correct indentions.
Some comments in the following.
Quoted 5 lines
Documentation/devicetree/bindings/arm/altera.yaml +0
-0
Documentation/devicetree/bindings/arm/altera.yaml properties: · line 19
Quoted 10 lines
Documentation/devicetree/bindings/arm/altera.yaml +3
-3@@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5 - - altr,socfpga-arria10 + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 - const: altr,socfpga
So here "- enum" do not need the extra indent.
Is it because this is not a list?
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml select: · line 30
Quoted 13 lines
Documentation/devicetree/bindings/arm/altera.yaml +0
-0Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1
-1@@ -25,7 +25,7 @@ select: properties: compatible: - items: + items: - const: amlogic,meson-gx-ao-secure - const: syscon
This is something I had expected the tooling to notice.
I had expected the two "- const" to be indented with 4 spaces, not two. So there is something I do not understand.
Quoted 8 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +0
-0@@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items:
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml properties: · line 23
Quoted 10 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4
-5- - enum: - - ea,ea3250 - - phytec,phy3250 - - const: nxp,lpc3250 - + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250
And here "- enum" receive extra indent.
I trust you know what you are doing - but I do not get it.
Some pointers or examples for the correct indention would be great. I cannot review this patch as long as I do not know the rules.
My request to update example-schema.yaml was one way to teach me. (Some people will say that is difficult/impossible to teach me, but thats another story:-) ).
Sam
Rob Herring
maintainerRe: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Joe PerchesQuoted 9 lines · Joe Perches
Quoted 7 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
Quoted 6 lines
Quoted 2 lines
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
This is a large change.
Was this done manually or by some script?
Scripted with python ruamel yaml, but then I had to filter out all the re-formatting (hence the first patch to cut down some of that).
Quoted 2 lines
If it was done manually, how likely is it there are defects in the conversion?
Either way, the schemas still have to pass the meta-schema checks.
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Rob Herring
maintainerQuoted 10 lines · Sam Ravnborg
Hi Rob.
Quoted 4 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Are there any plans to improve the tooling so we get warnigns for this?
I've been experimenting with yamllint some. I haven't figured out how to best integrate it in. Probably need to start with something minimal and warning free for the tree and then add to it.
There's also yaml-format in the dtschema repo which just reads in and writes out a yaml file using ruamel round trip yaml parser. That's what I used here.
Quoted 4 lines
Otherwise I am afraid we will see a lot of patches that gets this wrong.
As a follow-up patch it would be good if
example-schema.yamlcould gain some comments about the correct indentions.
Sure, I can do that.
Quoted 13 lines
Some comments in the following.
Quoted 10 lines
Documentation/devicetree/bindings/arm/altera.yaml +0
-2@@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5
Quoted 8 lines
Documentation/devicetree/bindings/arm/altera.yaml properties: · line 19
Quoted 5 lines
Documentation/devicetree/bindings/arm/altera.yaml +3
-1- - altr,socfpga-arria10 + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 - const: altr,socfpgaSo here "- enum" do not need the extra indent.
Is it because this is not a list?
Right. Indentation is 2 more spaces than the parent keyword ignoring any hyphen in the parent.
Quoted 6 lines
Quoted 6 lines
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +0
-0@@ -25,7 +25,7 @@ select:
Quoted 10 lines
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml select: · line 30
Quoted 6 lines
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1
-1properties: compatible: - items: + items: - const: amlogic,meson-gx-ao-secure - const: sysconThis is something I had expected the tooling to notice.
I had expected the two "- const" to be indented with 4 spaces, not two. So there is something I do not understand.
As above, correct indenting is 2 spaces from the parent not counting any '-' in the parent, but the '-' counts for indenting the children.
Arguably, this style is inconsistent that sometimes the '-' counts and sometimes it doesn't. However, I think this style is better because it distinguishes lists vs. dicts more clearly. It's easy to miss the '-' when the indentation is the same:
- foo:
- bar
- baz
- foo:
bar
baz
Or worse:
- foo:
- bar
baz
Both styles are valid. It's just a tabs vs. spaces debate, and I just picked one.
Quoted 21 lines
Quoted 8 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +0
-0@@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items:Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml properties: · line 23
Quoted 10 lines
Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4
-5- - enum: - - ea,ea3250 - - phytec,phy3250 - - const: nxp,lpc3250 - + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250And here "- enum" receive extra indent.
Quoted 3 lines
I trust you know what you are doing - but I do not get it.
Some pointers or examples for the correct indention would be great.
With this patch, the tree is all correct examples. :)
Quoted 7 lines
I cannot review this patch as long as I do not know the rules.
My request to update
example-schema.yamlwas one way to teach me. (Some people will say that is difficult/impossible to teach me, but thats another story:-) ).Sam
Quoted 7 lines · On Wed, 15 Apr 2020 19:55:48 -0500 Rob Herring…
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>---
...
Quoted 2 lines
.../bindings/iio/adc/adi,ad7124.yaml | 4 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 6 +-
Quoted 2,047 lines
.../input/allwinner,sun4i-a10-lradc-keys.yaml | 4 +- .../bindings/input/touchscreen/goodix.yaml | 2 +- .../bindings/interconnect/qcom,msm8916.yaml | 4 +- .../bindings/interconnect/qcom,msm8974.yaml | 4 +- .../bindings/interconnect/qcom,qcs404.yaml | 4 +- .../allwinner,sun7i-a20-sc-nmi.yaml | 12 ++-- .../intel,ixp4xx-interrupt.yaml | 8 +-- .../interrupt-controller/st,stm32-exti.yaml | 12 ++-- .../bindings/iommu/samsung,sysmmu.yaml | 10 +-- .../bindings/mailbox/st,stm32-ipcc.yaml | 2 +- .../media/allwinner,sun4i-a10-csi.yaml | 28 ++++---- .../bindings/media/amlogic,gx-vdec.yaml | 14 ++-- .../bindings/media/renesas,ceu.yaml | 28 ++++---- .../bindings/media/renesas,vin.yaml | 8 +-- .../devicetree/bindings/media/ti,vpe.yaml | 2 +- .../memory-controllers/fsl/imx8m-ddrc.yaml | 6 +- .../bindings/mfd/st,stm32-lptimer.yaml | 4 +- .../bindings/mfd/st,stm32-timers.yaml | 4 +- .../devicetree/bindings/mfd/syscon.yaml | 12 ++-- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- .../bindings/mmc/rockchip-dw-mshc.yaml | 16 ++--- .../bindings/mmc/socionext,uniphier-sd.yaml | 14 ++-- .../devicetree/bindings/mtd/denali,nand.yaml | 4 +- .../net/allwinner,sun8i-a83t-emac.yaml | 4 +- .../bindings/net/can/bosch,m_can.yaml | 52 +++++++-------- .../bindings/net/renesas,ether.yaml | 4 +- .../bindings/net/ti,cpsw-switch.yaml | 12 ++-- .../bindings/net/ti,davinci-mdio.yaml | 27 ++++---- .../bindings/phy/intel,lgm-emmc-phy.yaml | 2 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 16 ++--- .../bindings/remoteproc/st,stm32-rproc.yaml | 2 +- .../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 4 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------ .../bindings/serial/amlogic,meson-uart.yaml | 16 ++--- .../devicetree/bindings/serial/rs485.yaml | 17 ++--- .../bindings/soc/amlogic/amlogic,canvas.yaml | 10 +-- .../bindings/sound/renesas,fsi.yaml | 16 ++--- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 10 +-- .../devicetree/bindings/spi/renesas,hspi.yaml | 4 +- .../devicetree/bindings/spi/spi-pl022.yaml | 2 +- .../bindings/spi/st,stm32-qspi.yaml | 4 +- .../allwinner,sun4i-a10-system-control.yaml | 64 +++++++++---------- .../bindings/thermal/amlogic,thermal.yaml | 10 +-- .../bindings/timer/arm,arch_timer.yaml | 4 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 4 +- .../devicetree/bindings/usb/dwc2.yaml | 8 +-- 77 files changed, 450 insertions(+), 450 deletions(-)Documentation/devicetree/bindings/arm/altera.yaml +3
-3@@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5 - - altr,socfpga-arria10 + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 - const: altr,socfpgaDocumentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +1
-1@@ -25,7 +25,7 @@ select: properties: compatible: - items: + items: - const: amlogic,meson-gx-ao-secure - const: sysconDocumentation/devicetree/bindings/arm/bitmain.yaml +1
-1@@ -13,6 +13,6 @@ properties: compatible: items: - enum: - - bitmain,sophon-edge + - bitmain,sophon-edge - const: bitmain,bm1880Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +4
-5@@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items: - - enum: - - ea,ea3250 - - phytec,phy3250 - - const: nxp,lpc3250 - + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +13
-13@@ -17,45 +17,45 @@ properties: - description: LD4 SoC boards items: - enum: - - socionext,uniphier-ld4-ref + - socionext,uniphier-ld4-ref - const: socionext,uniphier-ld4 - description: Pro4 SoC boards items: - enum: - - socionext,uniphier-pro4-ace - - socionext,uniphier-pro4-ref - - socionext,uniphier-pro4-sanji + - socionext,uniphier-pro4-ace + - socionext,uniphier-pro4-ref + - socionext,uniphier-pro4-sanji - const: socionext,uniphier-pro4 - description: sLD8 SoC boards items: - enum: - - socionext,uniphier-sld8-ref + - socionext,uniphier-sld8-ref - const: socionext,uniphier-sld8 - description: PXs2 SoC boards items: - enum: - - socionext,uniphier-pxs2-gentil - - socionext,uniphier-pxs2-vodka + - socionext,uniphier-pxs2-gentil + - socionext,uniphier-pxs2-vodka - const: socionext,uniphier-pxs2 - description: LD6b SoC boards items: - enum: - - socionext,uniphier-ld6b-ref + - socionext,uniphier-ld6b-ref - const: socionext,uniphier-ld6b - description: LD11 SoC boards items: - enum: - - socionext,uniphier-ld11-global - - socionext,uniphier-ld11-ref + - socionext,uniphier-ld11-global + - socionext,uniphier-ld11-ref - const: socionext,uniphier-ld11 - description: LD20 SoC boards items: - enum: - - socionext,uniphier-ld20-global - - socionext,uniphier-ld20-ref + - socionext,uniphier-ld20-global + - socionext,uniphier-ld20-ref - const: socionext,uniphier-ld20 - description: PXs3 SoC boards items: - enum: - - socionext,uniphier-pxs3-ref + - socionext,uniphier-pxs3-ref - const: socionext,uniphier-pxs3Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +1
-1@@ -20,7 +20,7 @@ description: | [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible:Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +3
-3@@ -14,9 +14,9 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32mp157-syscfg - - const: syscon + - enum: + - st,stm32mp157-syscfg + - const: syscon reg: maxItems: 1Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +2
-2@@ -26,8 +26,8 @@ properties: oneOf: - const: faraday,ftide010 - items: - - const: cortina,gemini-pata - - const: faraday,ftide010 + - const: cortina,gemini-pata + - const: faraday,ftide010 reg: maxItems: 1Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +2
-2@@ -21,8 +21,8 @@ properties: oneOf: - const: allwinner,sun8i-a23-rsb - items: - - const: allwinner,sun8i-a83t-rsb - - const: allwinner,sun8i-a23-rsb + - const: allwinner,sun8i-a83t-rsb + - const: allwinner,sun8i-a23-rsb reg: maxItems: 1Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +4
-4@@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk - items: - - const: allwinner,sun5i-a13-dram-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk - items: - - const: allwinner,sun8i-h3-apb0-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk reg: maxItems: 1Documentation/devicetree/bindings/clock/fsl,plldig.yaml +8
-9@@ -28,15 +28,14 @@ properties: const: 0 fsl,vco-hz: - description: Optional for VCO frequency of the PLL in Hertz. - The VCO frequency of this PLL cannot be changed during runtime - only at startup. Therefore, the output frequencies are very - limited and might not even closely match the requested frequency. - To work around this restriction the user may specify its own - desired VCO frequency for the PLL. - minimum: 650000000 - maximum: 1300000000 - default: 1188000000 + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 required: - compatibleDocumentation/devicetree/bindings/clock/qcom,mmcc.yaml +8
-8@@ -15,15 +15,15 @@ description: | power domains. properties: - compatible : + compatible: enum: - - qcom,mmcc-apq8064 - - qcom,mmcc-apq8084 - - qcom,mmcc-msm8660 - - qcom,mmcc-msm8960 - - qcom,mmcc-msm8974 - - qcom,mmcc-msm8996 - - qcom,mmcc-msm8998 + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 clocks: items:Documentation/devicetree/bindings/connector/usb-connector.yaml +3
-3@@ -144,7 +144,7 @@ required: examples: # Micro-USB connector with HS lines routed via controller (MUIC). - - |+ + - | muic-max77843 { usb_con1: connector { compatible = "usb-b-connector";@@ -156,7 +156,7 @@ examples: # USB-C connector attached to CC controller (s2mm005), HS lines routed # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. - - |+ + - | ccic: s2mm005 { usb_con2: connector { compatible = "usb-c-connector";@@ -190,7 +190,7 @@ examples: # USB-C connector attached to a typec port controller(ptn5110), which has # power delivery support and enables drp. - - |+ + - | #include <dt-bindings/usb/pd.h> typec: ptn5110 { usb_con3: connector {Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +7
-7@@ -15,16 +15,16 @@ properties: oneOf: - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun5i-a13-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun6i-a31-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun7i-a20-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun8i-a33-crypto + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +8
-8@@ -50,16 +50,16 @@ if: const: allwinner,sun50i-h6-crypto then: properties: - clocks: - minItems: 3 - clock-names: - minItems: 3 + clocks: + minItems: 3 + clock-names: + minItems: 3 else: properties: - clocks: - maxItems: 2 - clock-names: - maxItems: 2 + clocks: + maxItems: 2 + clock-names: + maxItems: 2 required: - compatibleDocumentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +1
-1@@ -12,7 +12,7 @@ maintainers: properties: compatible: items: - - const: amlogic,gxl-crypto + - const: amlogic,gxl-crypto reg: maxItems: 1Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +20
-20@@ -21,8 +21,8 @@ properties: - const: allwinner,sun5i-a10s-hdmi - const: allwinner,sun6i-a31-hdmi - items: - - const: allwinner,sun7i-a20-hdmi - - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi reg: maxItems: 1@@ -33,32 +33,32 @@ properties: clocks: oneOf: - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The HDMI DDC clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL clock-names: oneOf: - items: - - const: ahb - - const: mod - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 - items: - - const: ahb - - const: mod - - const: ddc - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 resets: maxItems: 1Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +29
-29@@ -35,26 +35,26 @@ properties: - const: allwinner,sun9i-a80-tcon-tv - items: - - enum: - - allwinner,sun7i-a20-tcon0 - - allwinner,sun7i-a20-tcon1 - - const: allwinner,sun7i-a20-tcon + - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon - items: - - enum: - - allwinner,sun50i-a64-tcon-lcd - - const: allwinner,sun8i-a83t-tcon-lcd + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd - items: - - enum: - - allwinner,sun8i-h3-tcon-tv - - allwinner,sun50i-a64-tcon-tv - - const: allwinner,sun8i-a83t-tcon-tv + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv - items: - - enum: - - allwinner,sun50i-h6-tcon-tv - - const: allwinner,sun8i-r40-tcon-tv + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv reg: maxItems: 1@@ -83,37 +83,37 @@ properties: resets: anyOf: - items: - - description: TCON Reset Line + - description: TCON Reset Line - items: - - description: TCON Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON LVDS Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line reset-names: oneOf: - const: lcd - items: - - const: lcd - - const: lvds + - const: lcd + - const: lvds - items: - - const: lcd - - const: edp + - const: lcd + - const: edp - items: - - const: lcd - - const: edp - - const: lvds + - const: lcd + - const: edp + - const: lvds ports: type: objectDocumentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +14
-14@@ -76,28 +76,28 @@ required: allOf: - if: properties: - compatible: - contains: - const: allwinner,sun6i-a31-mipi-dsi + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi then: - properties: - clocks: - minItems: 2 + properties: + clocks: + minItems: 2 - required: - - clock-names + required: + - clock-names - if: properties: - compatible: - contains: - const: allwinner,sun50i-a64-mipi-dsi + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi then: - properties: - clocks: - minItems: 1 + properties: + clocks: + minItems: 1 additionalProperties: falseDocumentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +5
-5@@ -29,11 +29,11 @@ properties: - const: allwinner,sun50i-h6-dw-hdmi - items: - - enum: - - allwinner,sun8i-h3-dw-hdmi - - allwinner,sun8i-r40-dw-hdmi - - allwinner,sun50i-a64-dw-hdmi - - const: allwinner,sun8i-a83t-dw-hdmi + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi reg: maxItems: 1Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +9
-9@@ -32,17 +32,17 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter - - const: lvds-encoder # Generic LVDS encoder compatible fallback + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - - enum: - - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver - - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: type: objectDocumentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +1
-1@@ -18,7 +18,7 @@ properties: reg: true reset-gpios: true vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage enforce-video-mode: true required:Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +2
-2@@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatibleDocumentation/devicetree/bindings/display/renesas,cmm.yaml +8
-8@@ -21,15 +21,15 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,r8a7795-cmm - - renesas,r8a7796-cmm - - renesas,r8a77965-cmm - - renesas,r8a77990-cmm - - renesas,r8a77995-cmm - - const: renesas,rcar-gen3-cmm + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm - items: - - const: renesas,rcar-gen2-cmm + - const: renesas,rcar-gen2-cmm reg: maxItems: 1Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +4
-4@@ -69,10 +69,10 @@ properties: maxItems: 3 reg-names: - items: - - const: gcfg - - const: rchanrt - - const: tchanrt + items: + - const: gcfg + - const: rchanrt + - const: tchanrt msi-parent: trueDocumentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +1
-1@@ -27,7 +27,7 @@ properties: gpio-controller: true '#gpio-cells': - const: 2 + const: 2 ngpios: minimum: 0Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +9
-9@@ -16,33 +16,33 @@ properties: oneOf: - items: - enum: - - samsung,exynos5250-mali + - samsung,exynos5250-mali - const: arm,mali-t604 - items: - enum: - - samsung,exynos5420-mali + - samsung,exynos5420-mali - const: arm,mali-t628 - items: - enum: - - allwinner,sun50i-h6-mali + - allwinner,sun50i-h6-mali - const: arm,mali-t720 - items: - enum: - - amlogic,meson-gxm-mali - - realtek,rtd1295-mali + - amlogic,meson-gxm-mali + - realtek,rtd1295-mali - const: arm,mali-t820 - items: - enum: - - arm,juno-mali + - arm,juno-mali - const: arm,mali-t624 - items: - enum: - - rockchip,rk3288-mali - - samsung,exynos5433-mali + - rockchip,rk3288-mali + - samsung,exynos5433-mali - const: arm,mali-t760 - items: - enum: - - rockchip,rk3399-mali + - rockchip,rk3399-mali - const: arm,mali-t860 # "arm,mali-t830"Documentation/devicetree/bindings/gpu/vivante,gc.yaml +1
-1@@ -9,7 +9,7 @@ title: Vivante GPU Bindings description: Vivante GPU core devices maintainers: - - Lucas Stach <[email protected]> + - Lucas Stach <[email protected]> properties: compatible:Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +5
-5@@ -28,14 +28,14 @@ properties: - const: rockchip,rk3399-i2c - items: - enum: - - rockchip,rk3036-i2c - - rockchip,rk3368-i2c + - rockchip,rk3036-i2c + - rockchip,rk3368-i2c - const: rockchip,rk3288-i2c - items: - enum: - - rockchip,px30-i2c - - rockchip,rk3308-i2c - - rockchip,rk3328-i2c + - rockchip,px30-i2c + - rockchip,rk3308-i2c + - rockchip,rk3328-i2c - const: rockchip,rk3399-i2c reg:Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2
-2@@ -72,8 +72,8 @@ patternProperties: The channel number. It can have up to 8 channels on ad7124-4 and 16 channels on ad7124-8, numbered from 0 to 15. items: - minimum: 0 - maximum: 15 + minimum: 0 + maximum: 15 adi,reference-select: description: |Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +3
-3@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology / Analog Devices LTC2496 ADC maintainers: - - Lars-Peter Clausen <lars-Qo5EllUWu/[email protected]> - - Michael Hennerich <[email protected]> - - Stefan Popa <[email protected]> + - Lars-Peter Clausen <lars-Qo5EllUWu/[email protected]> + - Michael Hennerich <[email protected]> + - Stefan Popa <[email protected]> properties: compatible:Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2
-2@@ -16,8 +16,8 @@ properties: - const: allwinner,sun4i-a10-lradc-keys - const: allwinner,sun8i-a83t-r-lradc - items: - - const: allwinner,sun50i-a64-lradc - - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc reg: maxItems: 1Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1
-1@@ -63,7 +63,7 @@ required: - interrupts examples: -- | + - | i2c { #address-cells = <1>; #size-cells = <0>;Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +2
-2@@ -10,8 +10,8 @@ maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm MSM8916 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm MSM8916 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: compatible:Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +2
-2@@ -10,8 +10,8 @@ maintainers: - Brian Masney <[email protected]> description: | - The Qualcomm MSM8974 interconnect providers support setting system - bandwidth requirements between various network-on-chip fabrics. + The Qualcomm MSM8974 interconnect providers support setting system + bandwidth requirements between various network-on-chip fabrics. properties: reg:Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +2
-2@@ -10,8 +10,8 @@ maintainers: - Georgi Djakov <[email protected]> description: | - The Qualcomm QCS404 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm QCS404 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: reg:Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +6
-6@@ -27,15 +27,15 @@ properties: deprecated: true - const: allwinner,sun7i-a20-sc-nmi - items: - - const: allwinner,sun8i-a83t-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun8i-a83t-r-intc + - const: allwinner,sun6i-a31-r-intc - const: allwinner,sun9i-a80-sc-nmi - items: - - const: allwinner,sun50i-a64-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-a64-r-intc + - const: allwinner,sun6i-a31-r-intc - items: - - const: allwinner,sun50i-h6-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-h6-r-intc + - const: allwinner,sun6i-a31-r-intc reg: maxItems: 1Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +4
-4@@ -25,10 +25,10 @@ properties: compatible: items: - enum: - - intel,ixp42x-interrupt - - intel,ixp43x-interrupt - - intel,ixp45x-interrupt - - intel,ixp46x-interrupt + - intel,ixp42x-interrupt + - intel,ixp43x-interrupt + - intel,ixp45x-interrupt + - intel,ixp46x-interrupt reg: maxItems: 1Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +6
-6@@ -14,13 +14,13 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32-exti - - st,stm32h7-exti + - enum: + - st,stm32-exti + - st,stm32h7-exti - items: - - enum: - - st,stm32mp1-exti - - const: syscon + - enum: + - st,stm32mp1-exti + - const: syscon "#interrupt-cells": const: 2Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +5
-5@@ -54,13 +54,13 @@ properties: clock-names: oneOf: - items: - - const: sysmmu + - const: sysmmu - items: - - const: sysmmu - - const: master + - const: sysmmu + - const: master - items: - - const: aclk - - const: pclk + - const: aclk + - const: pclk "#iommu-cells": const: 0Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +1
-1@@ -24,7 +24,7 @@ properties: maxItems: 1 clocks: - maxItems: 1 + maxItems: 1 interrupts: items:Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +14
-14@@ -20,11 +20,11 @@ properties: - const: allwinner,sun4i-a10-csi1 - const: allwinner,sun7i-a20-csi0 - items: - - const: allwinner,sun7i-a20-csi1 - - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 - items: - - const: allwinner,sun8i-r40-csi0 - - const: allwinner,sun7i-a20-csi0 + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1@@ -35,24 +35,24 @@ properties: clocks: oneOf: - items: - - description: The CSI interface clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI DRAM clock - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: oneOf: - items: - - const: bus - - const: ram + - const: bus + - const: ram - items: - - const: bus - - const: isp - - const: ram + - const: bus + - const: isp + - const: ram resets: maxItems: 1Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +7
-7@@ -29,14 +29,14 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,gxbb-vdec # GXBB (S905) - - amlogic,gxl-vdec # GXL (S905X, S905D) - - amlogic,gxm-vdec # GXM (S912) - - const: amlogic,gx-vdec + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec - enum: - - amlogic,g12a-vdec # G12A (S905X2, S905D2) - - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) interrupts: minItems: 2Documentation/devicetree/bindings/media/renesas,ceu.yaml +14
-14@@ -32,23 +32,23 @@ properties: additionalProperties: false properties: - endpoint: - type: object - additionalProperties: false + endpoint: + type: object + additionalProperties: false # Properties described in # Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - remote-endpoint: true - hsync-active: true - vsync-active: true - field-even-active: false - bus-width: - enum: [8, 16] - default: 8 - - required: - - remote-endpoint + properties: + remote-endpoint: true + hsync-active: true + vsync-active: true + field-even-active: false + bus-width: + enum: [8, 16] + default: 8 + + required: + - remote-endpoint required: - endpointDocumentation/devicetree/bindings/media/renesas,vin.yaml +4
-4@@ -261,13 +261,13 @@ properties: anyOf: - required: - - endpoint@0 + - endpoint@0 - required: - - endpoint@1 + - endpoint@1 - required: - - endpoint@2 + - endpoint@2 - required: - - endpoint@3 + - endpoint@3 additionalProperties: falseDocumentation/devicetree/bindings/media/ti,vpe.yaml +1
-1@@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,dra7-vpe + const: ti,dra7-vpe reg: items:Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +3
-3@@ -25,9 +25,9 @@ properties: compatible: items: - enum: - - fsl,imx8mn-ddrc - - fsl,imx8mm-ddrc - - fsl,imx8mq-ddrc + - fsl,imx8mn-ddrc + - fsl,imx8mm-ddrc + - fsl,imx8mq-ddrc - const: fsl,imx8m-ddrc reg:Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +2
-2@@ -66,8 +66,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 2 + minimum: 0 + maximum: 2 required: - compatibleDocumentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2
-2@@ -102,8 +102,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 16 + minimum: 0 + maximum: 16 required: - compatibleDocumentation/devicetree/bindings/mfd/syscon.yaml +6
-6@@ -33,13 +33,13 @@ properties: compatible: anyOf: - items: - - enum: - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller - - const: syscon + - const: syscon - contains: const: sysconDocumentation/devicetree/bindings/mmc/cdns,sdhci.yaml +1
-1@@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - socionext,uniphier-sd4hc + - socionext,uniphier-sd4hc - const: cdns,sd4hc reg:Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +8
-8@@ -30,21 +30,21 @@ properties: - items: - enum: # for Rockchip PX30 - - rockchip,px30-dw-mshc + - rockchip,px30-dw-mshc # for Rockchip RK3036 - - rockchip,rk3036-dw-mshc + - rockchip,rk3036-dw-mshc # for Rockchip RK322x - - rockchip,rk3228-dw-mshc + - rockchip,rk3228-dw-mshc # for Rockchip RK3308 - - rockchip,rk3308-dw-mshc + - rockchip,rk3308-dw-mshc # for Rockchip RK3328 - - rockchip,rk3328-dw-mshc + - rockchip,rk3328-dw-mshc # for Rockchip RK3368 - - rockchip,rk3368-dw-mshc + - rockchip,rk3368-dw-mshc # for Rockchip RK3399 - - rockchip,rk3399-dw-mshc + - rockchip,rk3399-dw-mshc # for Rockchip RV1108 - - rockchip,rv1108-dw-mshc + - rockchip,rv1108-dw-mshc - const: rockchip,rk3288-dw-mshc reg:Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +7
-7@@ -35,15 +35,15 @@ properties: oneOf: - const: host - items: - - const: host - - const: bridge + - const: host + - const: bridge - items: - - const: host - - const: hw + - const: host + - const: hw - items: - - const: host - - const: bridge - - const: hw + - const: host + - const: bridge + - const: hw resets: minItems: 1Documentation/devicetree/bindings/mtd/denali,nand.yaml +2
-2@@ -54,8 +54,8 @@ properties: reg: register reset oneOf: - items: - - const: nand - - const: reg + - const: nand + - const: reg - const: nand - const: regDocumentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +2
-2@@ -19,8 +19,8 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac - - const: allwinner,sun50i-a64-emac + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac reg: maxItems: 1Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +26
-26@@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings description: Bosch MCAN controller for CAN bus maintainers: - - Sriram Dash <[email protected]> + - Sriram Dash <[email protected]> properties: compatible:@@ -51,31 +51,31 @@ properties: bosch,mram-cfg: description: | - Message RAM configuration data. - Multiple M_CAN instances can share the same Message RAM - and each element(e.g Rx FIFO or Tx Buffer and etc) number - in Message RAM is also configurable, so this property is - telling driver how the shared or private Message RAM are - used by this M_CAN controller. - - The format should be as follows: - <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> - The 'offset' is an address offset of the Message RAM where - the following elements start from. This is usually set to - 0x0 if you're using a private Message RAM. The remain cells - are used to specify how many elements are used for each FIFO/Buffer. - - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words - - Please refer to 2.4.1 Message RAM Configuration in Bosch - M_CAN user manual for details. + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. allOf: - $ref: /schemas/types.yaml#/definitions/int32-array - items:Documentation/devicetree/bindings/net/renesas,ether.yaml +2
-2@@ -40,8 +40,8 @@ properties: reg: items: - - description: E-DMAC/feLic registers - - description: TSU registers + - description: E-DMAC/feLic registers + - description: TSU registers minItems: 1 interrupts:Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +6
-6@@ -23,14 +23,14 @@ properties: oneOf: - const: ti,cpsw-switch - items: - - const: ti,am335x-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am335x-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,am4372-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am4372-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,dra7-cpsw-switch - - const: ti,cpsw-switch + - const: ti,dra7-cpsw-switch + - const: ti,cpsw-switch reg: maxItems: 1Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +13
-14@@ -18,25 +18,24 @@ allOf: properties: compatible: oneOf: - - const: ti,davinci_mdio - - items: - - const: ti,keystone_mdio - - const: ti,davinci_mdio - - items: - - const: ti,cpsw-mdio - - const: ti,davinci_mdio - - items: - - const: ti,am4372-mdio - - const: ti,cpsw-mdio - - const: ti,davinci_mdio + - const: ti,davinci_mdio + - items: + - const: ti,keystone_mdio + - const: ti,davinci_mdio + - items: + - const: ti,cpsw-mdio + - const: ti,davinci_mdio + - items: + - const: ti,am4372-mdio + - const: ti,cpsw-mdio + - const: ti,davinci_mdio reg: maxItems: 1 bus_freq: - maximum: 2500000 - description: - MDIO Bus frequency + maximum: 2500000 + description: MDIO Bus frequency ti,hwmods: description: TI hwmod nameDocumentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +1
-1@@ -23,7 +23,7 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + const: intel,lgm-emmc-phy "#phy-cells": const: 0Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +8
-8@@ -49,17 +49,17 @@ properties: are available. oneOf: - items: - - const: timers + - const: timers - items: - - const: timers - - const: pwm-tclk0 + - const: timers + - const: pwm-tclk0 - items: - - const: timers - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk1 - items: - - const: timers - - const: pwm-tclk0 - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk0 + - const: pwm-tclk1 interrupts: description:Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +1
-1@@ -25,7 +25,7 @@ properties: maxItems: 3 resets: - maxItems: 1 + maxItems: 1 st,syscfg-holdboot: allOf:Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +3
-1@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: BCM7216 RESCAL reset controller -description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216. +description: This document describes the BCM7216 RESCAL reset controller + which is responsible for controlling the reset of the SATA and PCIe0/1 + instances on BCM7216. maintainers: - Florian Fainelli <[email protected]>Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +19
-19@@ -38,10 +38,10 @@ properties: minItems: 3 maxItems: 3 description: | - Phandle/offset/mask triplet. The phandle to pwrcfg used to - access control register at offset, and change the dbp (Disable Backup - Protection) bit represented by the mask, mandatory to disable/enable backup - domain (RTC registers) write protection. + Phandle/offset/mask triplet. The phandle to pwrcfg used to + access control register at offset, and change the dbp (Disable Backup + Protection) bit represented by the mask, mandatory to disable/enable backup + domain (RTC registers) write protection. assigned-clocks: description: |@@ -78,14 +78,14 @@ allOf: const: st,stm32h7-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - required: - - clock-names - - st,syscfg + required: + - clock-names + - st,syscfg - if: properties:@@ -94,16 +94,16 @@ allOf: const: st,stm32mp1-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - assigned-clocks: false - assigned-clock-parents: false + assigned-clocks: false + assigned-clock-parents: false - required: - - clock-names + required: + - clock-names required: - compatibleDocumentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +8
-8@@ -24,18 +24,18 @@ properties: oneOf: - description: Always-on power domain UART controller items: - - enum: + - enum: + - amlogic,meson6-uart + - amlogic,meson8-uart + - amlogic,meson8b-uart + - amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart + - description: Everything-Else power domain UART controller + enum: - amlogic,meson6-uart - amlogic,meson8-uart - amlogic,meson8b-uart - amlogic,meson-gx-uart - - const: amlogic,meson-ao-uart - - description: Everything-Else power domain UART controller - enum: - - amlogic,meson6-uart - - amlogic,meson8-uart - - amlogic,meson8b-uart - - amlogic,meson-gx-uart reg: maxItems: 1Documentation/devicetree/bindings/serial/rs485.yaml +9
-8@@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: RS485 serial communications Bindings -description: The RTS signal is capable of automatically controlling - line direction for the built-in half-duplex mode. - The properties described hereafter shall be given to a - half-duplex capable UART node. +description: The RTS signal is capable of automatically controlling line + direction for the built-in half-duplex mode. The properties described + hereafter shall be given to a half-duplex capable UART node. maintainers: - - Rob Herring <[email protected]> + - Rob Herring <[email protected]> properties: rs485-rts-delay:@@ -37,9 +36,11 @@ properties: $ref: /schemas/types.yaml#/definitions/flag linux,rs485-enabled-at-boot-time: - description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. + description: enables the rs485 feature at boot time. It can be disabled + later with proper ioctl. $ref: /schemas/types.yaml#/definitions/flag rs485-rx-during-tx: - description: enables the receiving of data even while sending data. - $ref: /schemas/types.yaml#/definitions/flag + description: enables the receiving of data even while sending data. + $ref: /schemas/types.yaml#/definitions/flag +...Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +5
-5@@ -26,11 +26,11 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,meson8-canvas - - amlogic,meson8b-canvas - - amlogic,meson8m2-canvas - - const: amlogic,canvas + - enum: + - amlogic,meson8-canvas + - amlogic,meson8b-canvas + - amlogic,meson8m2-canvas + - const: amlogic,canvas - const: amlogic,canvas # GXBB and newer SoCs reg:Documentation/devicetree/bindings/sound/renesas,fsi.yaml +8
-8@@ -17,16 +17,16 @@ properties: oneOf: # for FSI2 SoC - items: - - enum: - - renesas,fsi2-sh73a0 - - renesas,fsi2-r8a7740 - - enum: - - renesas,sh_fsi2 + - enum: + - renesas,fsi2-sh73a0 + - renesas,fsi2-r8a7740 + - enum: + - renesas,sh_fsi2 # for Generic - items: - - enum: - - renesas,sh_fsi - - renesas,sh_fsi2 + - enum: + - renesas,sh_fsi + - renesas,sh_fsi2 reg: maxItems: 1Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +5
-5@@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya <[email protected]> - - Akash Asthana <[email protected]> + - Mukesh Savaliya <[email protected]> + - Akash Asthana <[email protected]> -description: - The QSPI controller allows SPI protocol communication in single, dual, or quad - wire transmission modes for read/write access to slaves such as NOR flash. +description: The QSPI controller allows SPI protocol communication in single, + dual, or quad wire transmission modes for read/write access to slaves such + as NOR flash. allOf: - $ref: /spi/spi-controller.yaml#Documentation/devicetree/bindings/spi/renesas,hspi.yaml +2
-2@@ -16,8 +16,8 @@ properties: compatible: items: - enum: - - renesas,hspi-r8a7778 # R-Car M1A - - renesas,hspi-r8a7779 # R-Car H1 + - renesas,hspi-r8a7778 # R-Car M1A + - renesas,hspi-r8a7779 # R-Car H1 - const: renesas,hspi reg:Documentation/devicetree/bindings/spi/spi-pl022.yaml +1
-1@@ -51,7 +51,7 @@ properties: pl022,rt: description: indicates the controller should run the message pump with realtime - priority to minimise the transfer latency on the bus (boolean) + priority to minimise the transfer latency on the bus (boolean) type: boolean dmas:Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +2
-2@@ -24,8 +24,8 @@ properties: reg-names: items: - - const: qspi - - const: qspi_mm + - const: qspi + - const: qspi_mm clocks: maxItems: 1Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +32
-32@@ -29,8 +29,8 @@ properties: - const: allwinner,sun4i-a10-system-control - const: allwinner,sun5i-a13-system-control - items: - - const: allwinner,sun7i-a20-system-control - - const: allwinner,sun4i-a10-system-control + - const: allwinner,sun7i-a20-system-control + - const: allwinner,sun4i-a10-system-control - const: allwinner,sun8i-a23-system-control - const: allwinner,sun8i-h3-system-control - const: allwinner,sun50i-a64-sram-controller@@ -38,11 +38,11 @@ properties: - const: allwinner,sun50i-a64-system-control - const: allwinner,sun50i-h5-system-control - items: - - const: allwinner,sun50i-h6-system-control - - const: allwinner,sun50i-a64-system-control + - const: allwinner,sun50i-h6-system-control + - const: allwinner,sun50i-a64-system-control - items: - - const: allwinner,suniv-f1c100s-system-control - - const: allwinner,sun4i-a10-system-control + - const: allwinner,suniv-f1c100s-system-control + - const: allwinner,sun4i-a10-system-control reg: maxItems: 1@@ -69,44 +69,44 @@ patternProperties: - const: allwinner,sun4i-a10-sram-d - const: allwinner,sun50i-a64-sram-c - items: - - const: allwinner,sun5i-a13-sram-a3-a4 - - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun5i-a13-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 - items: - - const: allwinner,sun7i-a20-sram-a3-a4 - - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun7i-a20-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 - items: - - const: allwinner,sun5i-a13-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun5i-a13-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun7i-a20-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun7i-a20-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun8i-a23-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun8i-a23-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun8i-h3-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun8i-h3-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-a64-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-a64-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-h5-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-h5-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-h6-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-h6-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun5i-a13-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun5i-a13-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,sun7i-a20-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun7i-a20-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,suniv-f1c100s-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,suniv-f1c100s-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,sun50i-h6-sram-c - - const: allwinner,sun50i-a64-sram-c + - const: allwinner,sun50i-h6-sram-c + - const: allwinner,sun50i-a64-sram-c required: - "#address-cells"Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +5
-5@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal properties: compatible: - items: - - enum: - - amlogic,g12a-cpu-thermal - - amlogic,g12a-ddr-thermal - - const: amlogic,g12a-thermal + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal reg: maxItems: 1Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +2
-2@@ -28,10 +28,10 @@ properties: - arm,armv7-timer - items: - enum: - - arm,armv7-timer + - arm,armv7-timer - items: - enum: - - arm,armv8-timer + - arm,armv8-timer interrupts: items:Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +2
-2@@ -20,7 +20,7 @@ properties: compatible: items: - enum: - - arm,armv7-timer-mem + - arm,armv7-timer-mem reg: maxItems: 1@@ -77,7 +77,7 @@ patternProperties: - description: physical timer irq - description: virtual timer irq - reg : + reg: minItems: 1 maxItems: 2 items:Documentation/devicetree/bindings/usb/dwc2.yaml +4
-5@@ -62,14 +62,14 @@ properties: resets: items: - - description: common reset - - description: ecc reset + - description: common reset + - description: ecc reset minItems: 1 reset-names: items: - - const: dwc2 - - const: dwc2-ecc + - const: dwc2 + - const: dwc2-ecc minItems: 1 phys: --2.20.1
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · On Wed, 15 Apr 2020 19:55:49 -0500 Rob Herring <[email protected]> wrote:
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
A few unrelated white space changes in enums in the IIO chunks.
Don't suppose they matter but maybe need the description to mention there may be some minor formatting changes as well in some cases.
Quoted 25 lines
--- .../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +- .../devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/hwmon/adi,ltc2947.yaml | 32 +-- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../bindings/iio/adc/adi,ad7124.yaml | 5 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +- .../bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++--
...
Quoted 91 lines
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +2
-3@@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txtDocumentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +1
-2@@ -18,8 +18,7 @@ properties: vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle reg: description: spi chipselect number according to the usual spi bindingsDocumentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +3
-4@@ -38,10 +38,9 @@ properties: microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 vref-supply: description: |Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +9
-12@@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: |@@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 "#io-channel-cells": const: 1
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml patternProperties: · line 129
Quoted 7 lines
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +1
-3@@ -129,9 +126,8 @@ patternProperties: - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [SPI_R, SPI_F, MANCH_R, MANCH_F]
I don't suppose it matters much but unrelated change.
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml patternProperties: · line 144
Quoted 9 lines
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +1
-1+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: |@@ -141,9 +137,8 @@ patternProperties: - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
Unrelated change.
Quoted 224 lines
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +2
-2- allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description:Documentation/devicetree/bindings/iio/light/tsl2772.yaml +6
-7@@ -33,13 +33,12 @@ properties: amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 interrupts: maxItems: 1Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +21
-35@@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 '#address-cells': const: 1@@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9@@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items:@@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended:@@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18@@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] adi,rsense-share: description:@@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64@@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27@@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] adi,custom-thermistor: description:@@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items:@@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6@@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended:@@ -379,8 +366,7 @@ patternProperties: adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms:Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +2
-3@@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to voltage:Documentation/devicetree/bindings/input/input.yaml +4
-5@@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff poll-interval: description: Poll interval time in milliseconds.
...
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoting Rob Herring (2020-04-15 17:55:49)
Quoted 7 lines
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
Quoted 6 lines
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>--- .../bindings/clock/fixed-factor-clock.yaml | 5 +-
Quoted 6 lines · Rob Herring
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.
Signed-off-by Rob Herring <[email protected]>
I see that people had comments but I can't judge the topics raised. So, I trust you guys that you find out when it is good to go and for that, here is my ack:
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
In reply to Rob HerringQuoted 11 lines · Rob Herring
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.
Signed-off-by Rob Herring <[email protected]>
Same preamble for my ack as in patch 1:
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/