s390x: Testing the Channel Subsystem I/O
v5 cover s390x: Testing the Channel Subsystem I/O
Goal of the series is to have a framwork to test Channel-Subsystem I/O with QEMU/KVM.
To be able to support interrupt for CSS I/O and for SCLP we need to modify the interrupt framework to allow re-entrant interruptions.
We add a registration for IRQ callbacks to the test programm to define its own interrupt handler. We need to do special work under interrupt like acknoledging the interrupt.
Being working on PSW bits to allow I/O interrupt, we define new PSW bits in arch_def.h and use __ASSEMBLER__ define to be able to include this header in an assembler source file.
This series presents four major tests:
- Enumeration:
The CSS is enumerated using the STSCH instruction recursively on all potentially existing channels.
Keeping the first channel found as a reference for future use. Checks STSCH
- Enable:
If the enumeration succeeded the tests enables the reference channel with MSCH and verifies with STSCH that the channel is effectively enabled
Checks MSCH
- Sense:
If the channel is enabled this test sends a SENSE_ID command to the reference channel, analysing the answer and expecting the Control unit type being 0xc0ca
Checks SSCH(READ) and IO-IRQ
- ping-pong:
If the reference channel leads to the PONG device (0xc0ca), the test exchanges a string containing a 9 digit number with the PONG device and expecting this number to be incremented by the PONG device.
Checks SSCH(WRITE)
Pierre Morel (10):
s390x: saving regs for interrupts
s390x: Use PSW bits definitions in cstart
s390x: cr0: adding AFP-register control bit
s390x: interrupt registration
s390x: export the clock get_clock_ms() utility
s390x: Library resources for CSS tests
s390x: css: stsch, enumeration test
s390x: css: msch, enable test
s390x: css: ssch/tsch with sense and interrupt
s390x: css: ping pong
lib/s390x/asm/arch_def.h | 19 ++- lib/s390x/asm/time.h | 36 +++++ lib/s390x/css.h | 277 +++++++++++++++++++++++++++++++ lib/s390x/css_dump.c | 157 ++++++++++++++++++ lib/s390x/css_lib.c | 55 +++++++ lib/s390x/interrupt.c | 22 ++- lib/s390x/interrupt.h | 7 + s390x/Makefile | 3 + s390x/css.c | 341 +++++++++++++++++++++++++++++++++++++++ s390x/cstart64.S | 40 +++-- s390x/intercept.c | 11 +- s390x/unittests.cfg | 4 + 12 files changed, 946 insertions(+), 26 deletions(-) create mode 100644 lib/s390x/asm/time.h create mode 100644 lib/s390x/css.h create mode 100644 lib/s390x/css_dump.c create mode 100644 lib/s390x/css_lib.c create mode 100644 lib/s390x/interrupt.h create mode 100644 s390x/css.c
Signature · 62 lines
2.17.0 Changelog: from v4 to v5 - add a patch to explicitely define the initial_cr0 value (Janosch) - add RB from Janosh on interrupt registration - several formating, typo correction and removing unnecessary initialization in "linrary resources..." (Janosch) - several formating and typo corrections on "stsch enumeration test" (Connie) - reworking the msch test (Connie) - reworking of ssch test, pack the sense-id structure (Connie) from v3 to v4 - add RB from David and Thomas for patchs (3) irq registration and (4) clock export - rework the PSW bit definitions (Thomas) - Suppress undef DEBUG from css_dump (Thomas) - rework report() functions using new scheme (Thomas) - suppress un-necessary report_info() - more spelling corrections - add a loop around enable bit testing (Connie) - rework IRQ testing (Connie) - Test data addresses to be under 2G (Connie) from v2 to v3: - Rework spelling (Connie) - More descriptions (Connie) - use __ASSEMBLER__ preprocessing to keep bits definitions and C structures in the same file (David) - rename the new file clock.h as time.h (Janosch, David?) - use registration for the IO interruption (David, Thomas) - test the SCHIB to verify it has really be modified (Connie) - Lot of simplifications in the tests (Connie) from v1 to v2: - saving floating point registers (David, Janosh) - suppress unused PSW bits defintions (Janosh) - added Thomas reviewed-by - style and comments modifications (Connie, Janosh) - moved get_clock_ms() into headers and use it (Thomas) - separate header and library utility from tests - Suppress traces, separate tests, make better usage of reports
PATCH v5 1/10 s390x: saving regs for interrupts
If we use multiple source of interrupts, for example, using SCLP console to print information while using I/O interrupts, we need to have a re-entrant register saving interruption handling.
Instead of saving at a static memory address, let's save the base registers and the floating point registers on the stack.
Note that we keep the static register saving to recover from the RESET tests.
--- s390x/cstart64.S | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
s390x/cstart64.S +21 -2
@@ -118,6 +118,25 @@ memsetxc: lmg %r0, %r15, GEN_LC_SW_INT_GRS .endm +/* Save registers on the stack, so we can have stacked interrupts. */ + .macro SAVE_IRQ_REGS + slgfi %r15, 15 * 8 + stmg %r0, %r14, 0(%r15) + slgfi %r15, 16 * 8 + .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + std \i, \i * 8(%r15) + .endr + .endm + + .macro RESTORE_IRQ_REGS + .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + ld \i, \i * 8(%r15) + .endr + algfi %r15, 16 * 8 + lmg %r0, %r14, 0(%r15) + algfi %r15, 15 * 8 + .endm + .section .text /* * load_reset calling convention:
@@ -182,9 +201,9 @@ mcck_int: lpswe GEN_LC_MCCK_OLD_PSW io_int: - SAVE_REGS + SAVE_IRQ_REGS brasl %r14, handle_io_int - RESTORE_REGS + RESTORE_IRQ_REGS lpswe GEN_LC_IO_OLD_PSW svc_int:
Signature · 1 line
2.17.0
Re: [kvm-unit-tests PATCH v5 01/10] s390x: saving regs for interrupts
Quoted 20 lines · Pierre Morel
If we use multiple source of interrupts, for example, using SCLP console to print information while using I/O interrupts, we need to have a re-entrant register saving interruption handling.
Instead of saving at a static memory address, let's save the base registers and the floating point registers on the stack.
Note that we keep the static register saving to recover from the RESET tests.
Signed-off-by Pierre Morel <[email protected]>--- s390x/cstart64.S | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)s390x/cstart64.S +0
-0
s390x/cstart64.S memsetxc: · line 124
Quoted 7 lines
s390x/cstart64.S +4
-0@@ -118,6 +118,25 @@ memsetxc: lmg %r0, %r15, GEN_LC_SW_INT_GRS .endm +/* Save registers on the stack, so we can have stacked interrupts. */ + .macro SAVE_IRQ_REGS + slgfi %r15, 15 * 8 + stmg %r0, %r14, 0(%r15)
So this is just making some space on the stack and storing r0 - r14, right?
Same is done for the floating point registers below.
Could you add a comment above slgfi and stmg and explain what they do? A few words are enough.
Quoted 31 lines
s390x/cstart64.S +17
-2+ slgfi %r15, 16 * 8 + .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + std \i, \i * 8(%r15) + .endr + .endm + + .macro RESTORE_IRQ_REGS + .irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + ld \i, \i * 8(%r15) + .endr + algfi %r15, 16 * 8 + lmg %r0, %r14, 0(%r15) + algfi %r15, 15 * 8 + .endm + .section .text /* * load_reset calling convention:@@ -182,9 +201,9 @@ mcck_int: lpswe GEN_LC_MCCK_OLD_PSW io_int: - SAVE_REGS + SAVE_IRQ_REGS brasl %r14, handle_io_int - RESTORE_REGS + RESTORE_IRQ_REGS lpswe GEN_LC_IO_OLD_PSW svc_int:
Re: [kvm-unit-tests PATCH v5 01/10] s390x: saving regs for interrupts
Quoted 31 lines · Janosch Frank
Quoted 20 lines · Pierre Morel
If we use multiple source of interrupts, for example, using SCLP console to print information while using I/O interrupts, we need to have a re-entrant register saving interruption handling.
Instead of saving at a static memory address, let's save the base registers and the floating point registers on the stack.
Note that we keep the static register saving to recover from the RESET tests.
Signed-off-by Pierre Morel <[email protected]>--- s390x/cstart64.S | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)s390x/cstart64.S +0
-0s390x/cstart64.S memsetxc: · line 124
Quoted 7 lines
s390x/cstart64.S +4
-0@@ -118,6 +118,25 @@ memsetxc: lmg %r0, %r15, GEN_LC_SW_INT_GRS .endm +/* Save registers on the stack, so we can have stacked interrupts. */ + .macro SAVE_IRQ_REGS + slgfi %r15, 15 * 8 + stmg %r0, %r14, 0(%r15)So this is just making some space on the stack and storing r0 - r14, right?
Quoted 4 lines
Same is done for the floating point registers below.
Could you add a comment above slgfi and stmg and explain what they do? A few words are enough.
OK, thanks
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v5 2/10 s390x: Use PSW bits definitions in cstart
In reply to Pierre MorelThis patch defines the PSW bits EA/BA used to initialize the PSW masks for exceptions.
Since some PSW mask definitions exist already in arch_def.h we add these definitions there.
We move all PSW definitions together and protect assembler code against C syntax.
--- lib/s390x/asm/arch_def.h | 15 +++++++++++---- s390x/cstart64.S | 15 ++++++++------- 2 files changed, 19 insertions(+), 11 deletions(-)
lib/s390x/asm/arch_def.h +11 -4
@@ -10,15 +10,21 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_BA 0x0000000080000000UL +#define PSW_MASK_EA 0x0000000100000000UL + +#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA) + +#ifndef __ASSEMBLER__ +struct psw {uint64_t mask;uint64_t addr; }; -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define CR0_EXTM_SCLP 0X0000000000000200UL#define CR0_EXTM_EXTC 0X0000000000002000UL#define CR0_EXTM_EMGC 0X0000000000004000UL
@@ -297,4 +303,5 @@ static inline uint32_t get_prefix(void)return current_prefix; } +#endif /* not __ASSEMBLER__ */ #endif
s390x/cstart64.S +8 -7
@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init
@@ -214,19 +215,19 @@ svc_int: .align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASK initial_psw: - .quad 0x0000000180000000, clear_bss_start + .quad PSW_EXCEPTION_MASK, clear_bss_start pgm_int_psw: - .quad 0x0000000180000000, pgm_int + .quad PSW_EXCEPTION_MASK, pgm_int ext_int_psw: - .quad 0x0000000180000000, ext_int + .quad PSW_EXCEPTION_MASK, ext_int mcck_int_psw: - .quad 0x0000000180000000, mcck_int + .quad PSW_EXCEPTION_MASK, mcck_int io_int_psw: - .quad 0x0000000180000000, io_int + .quad PSW_EXCEPTION_MASK, io_int svc_int_psw: - .quad 0x0000000180000000, svc_int + .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ .quad 0x0000000000040000
Signature · 1 line
2.17.0
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 80 lines · Pierre Morel
This patch defines the PSW bits EA/BA used to initialize the PSW masks for exceptions.
Since some PSW mask definitions exist already in
arch_def.hwe add these definitions there.
We move all PSW definitions together and protect assembler code against C syntax.Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 15 +++++++++++---- s390x/cstart64.S | 15 ++++++++------- 2 files changed, 19 insertions(+), 11 deletions(-)lib/s390x/asm/arch_def.h +11
-4@@ -10,15 +10,21 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_BA 0x0000000080000000UL +#define PSW_MASK_EA 0x0000000100000000UL + +#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA) + +#ifndef __ASSEMBLER__ +struct psw {uint64_t mask;uint64_t addr; }; -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define CR0_EXTM_SCLP 0X0000000000000200UL#define CR0_EXTM_EXTC 0X0000000000002000UL#define CR0_EXTM_EMGC 0X0000000000004000UL@@ -297,4 +303,5 @@ static inline uint32_t get_prefix(void)return current_prefix; } +#endif /* not __ASSEMBLER__ */ #endif s390x/cstart64.S +5
-5@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int: .align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASK initial_psw: - .quad 0x0000000180000000, clear_bss_start + .quad PSW_EXCEPTION_MASK, clear_bss_start pgm_int_psw: - .quad 0x0000000180000000, pgm_int + .quad PSW_EXCEPTION_MASK, pgm_int ext_int_psw: - .quad 0x0000000180000000, ext_int + .quad PSW_EXCEPTION_MASK, ext_int mcck_int_psw: - .quad 0x0000000180000000, mcck_int
s390x/cstart64.S svc_int: · line 233
Quoted 10 lines
s390x/cstart64.S +3
-2+ .quad PSW_EXCEPTION_MASK, mcck_int io_int_psw: - .quad 0x0000000180000000, io_int + .quad PSW_EXCEPTION_MASK, io_int svc_int_psw: - .quad 0x0000000180000000, svc_int + .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ .quad 0x0000000000040000
Signature · 3 lines
Thanks, David / dhildenb
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 85 lines · David Hildenbrand
Quoted 84 lines · Pierre Morel
This patch defines the PSW bits EA/BA used to initialize the PSW masks for exceptions.
Since some PSW mask definitions exist already in
arch_def.hwe add these definitions there.
We move all PSW definitions together and protect assembler code against C syntax.Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 15 +++++++++++---- s390x/cstart64.S | 15 ++++++++------- 2 files changed, 19 insertions(+), 11 deletions(-)lib/s390x/asm/arch_def.h +11
-4@@ -10,15 +10,21 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_BA 0x0000000080000000UL +#define PSW_MASK_EA 0x0000000100000000UL + +#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA) + +#ifndef __ASSEMBLER__ +struct psw {uint64_t mask;uint64_t addr; }; -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define CR0_EXTM_SCLP 0X0000000000000200UL#define CR0_EXTM_EXTC 0X0000000000002000UL#define CR0_EXTM_EMGC 0X0000000000004000UL@@ -297,4 +303,5 @@ static inline uint32_t get_prefix(void)return current_prefix; } +#endif /* not __ASSEMBLER__ */ #endif s390x/cstart64.S +7
-6@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int: .align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASK initial_psw: - .quad 0x0000000180000000, clear_bss_start + .quad PSW_EXCEPTION_MASK, clear_bss_start pgm_int_psw: - .quad 0x0000000180000000, pgm_int + .quad PSW_EXCEPTION_MASK, pgm_int ext_int_psw: - .quad 0x0000000180000000, ext_int + .quad PSW_EXCEPTION_MASK, ext_int mcck_int_psw: - .quad 0x0000000180000000, mcck_int + .quad PSW_EXCEPTION_MASK, mcck_int io_int_psw: - .quad 0x0000000180000000, io_int + .quad PSW_EXCEPTION_MASK, io_int svc_int_psw:
Quoted 9 lines
s390x/cstart64.S svc_int: · line 233
Quoted 6 lines
s390x/cstart64.S +1
-1- .quad 0x0000000180000000, svc_int + .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ .quad 0x0000000000040000Reviewed-by David Hildenbrand <[email protected]>
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
In reply to Pierre MorelQuoted 7 lines · Pierre Morel
This patch defines the PSW bits EA/BA used to initialize the PSW masks for exceptions.
Since some PSW mask definitions exist already in
arch_def.hwe add these definitions there.
We move all PSW definitions together and protect assembler code against C syntax.
Please fix the issue mentioned below and run *all* tests against your new code to verify you didn't introduce regressions.
The rest looks good to me.
Quoted 12 lines
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 15 +++++++++++---- s390x/cstart64.S | 15 ++++++++------- 2 files changed, 19 insertions(+), 11 deletions(-)lib/s390x/asm/arch_def.h +0
-0
lib/s390x/asm/arch_def.h line 19
Quoted 10 lines
lib/s390x/asm/arch_def.h +7
-0@@ -10,15 +10,21 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_BA 0x0000000080000000UL +#define PSW_MASK_EA 0x0000000100000000UL + +#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA)
Could you add a space before and after the | ?
Quoted 34 lines
lib/s390x/asm/arch_def.h +4
-4+ +#ifndef __ASSEMBLER__ +struct psw {uint64_t mask;uint64_t addr; }; -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define CR0_EXTM_SCLP 0X0000000000000200UL#define CR0_EXTM_EXTC 0X0000000000002000UL#define CR0_EXTM_EMGC 0X0000000000004000UL@@ -297,4 +303,5 @@ static inline uint32_t get_prefix(void)return current_prefix; } +#endif /* not __ASSEMBLER__ */ #endif s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init
s390x/cstart64.S svc_int: · line 218
Quoted 5 lines
s390x/cstart64.S +1
-1@@ -214,19 +215,19 @@ svc_int: .align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASK
That won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
Quoted 22 lines
s390x/cstart64.S +6
-6initial_psw: - .quad 0x0000000180000000, clear_bss_start + .quad PSW_EXCEPTION_MASK, clear_bss_start pgm_int_psw: - .quad 0x0000000180000000, pgm_int + .quad PSW_EXCEPTION_MASK, pgm_int ext_int_psw: - .quad 0x0000000180000000, ext_int + .quad PSW_EXCEPTION_MASK, ext_int mcck_int_psw: - .quad 0x0000000180000000, mcck_int + .quad PSW_EXCEPTION_MASK, mcck_int io_int_psw: - .quad 0x0000000180000000, io_int + .quad PSW_EXCEPTION_MASK, io_int svc_int_psw: - .quad 0x0000000180000000, svc_int + .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ .quad 0x0000000000040000
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 15 lines
Quoted 15 lines
s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int:
Quoted 7 lines
s390x/cstart64.S svc_int: · line 218
Quoted 4 lines
s390x/cstart64.S +1
-1.align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASKThat won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
Good catch! Guess it would have bailed out when testing.
Signature · 3 lines
Thanks, David / dhildenb
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 15 lines · David Hildenbrand
Quoted 15 lines
Quoted 15 lines
s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int:
Quoted 7 lines
Quoted 7 lines
s390x/cstart64.S svc_int: · line 218
Quoted 4 lines
s390x/cstart64.S +1
-1.align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASKThat won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
hum... :(
Quoted 4 lines
Good catch! Guess it would have bailed out when testing.
Yes it does. Sorry.
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 26 lines · Pierre Morel
Quoted 15 lines · David Hildenbrand
Quoted 15 lines
Quoted 15 lines
s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int:Quoted 7 lines
Quoted 7 lines
s390x/cstart64.S svc_int: · line 218
Quoted 4 lines
s390x/cstart64.S +1
-1.align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASKThat won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
Quoted 8 lines
hum... :(
Quoted 4 lines
Good catch! Guess it would have bailed out when testing.
Yes it does. Sorry.
No worries, I run everything through the machinery before picking patches up.
Feel free to resend only the 4/5 patches you want to have in first.
Signature · 3 lines
Thanks, David / dhildenb
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 34 lines · David Hildenbrand
Quoted 33 lines · Pierre Morel
Quoted 15 lines · David Hildenbrand
Quoted 15 lines
Quoted 15 lines
s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int:Quoted 7 lines
Quoted 7 lines
s390x/cstart64.S svc_int: · line 218
Quoted 4 lines
s390x/cstart64.S +1
-1.align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASKThat won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
hum... :(
Quoted 4 lines
Good catch! Guess it would have bailed out when testing.
Quoted 7 lines
Quoted 1 line
Yes it does. Sorry.
No worries, I run everything through the machinery before picking patches up.
Feel free to resend only the 4/5 patches you want to have in first.
OK, thanks, I ll do
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
In reply to Janosch FrankQuoted 9 lines · Janosch Frank
Quoted 7 lines · Pierre Morel
This patch defines the PSW bits EA/BA used to initialize the PSW masks for exceptions.
Since some PSW mask definitions exist already in
arch_def.hwe add these definitions there.
We move all PSW definitions together and protect assembler code against C syntax.
Quoted 4 lines
Please fix the issue mentioned below and run *all* tests against your new code to verify you didn't introduce regressions.
The rest looks good to me.
Thanks,
Quoted 61 lines
Quoted 13 lines
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 15 +++++++++++---- s390x/cstart64.S | 15 ++++++++------- 2 files changed, 19 insertions(+), 11 deletions(-)lib/s390x/asm/arch_def.h +0
-0lib/s390x/asm/arch_def.h line 19
Quoted 10 lines
lib/s390x/asm/arch_def.h +7
-0@@ -10,15 +10,21 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_BA 0x0000000080000000UL +#define PSW_MASK_EA 0x0000000100000000UL + +#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA)Could you add a space before and after the | ?
Quoted 35 lines
lib/s390x/asm/arch_def.h +4
-4+ +#ifndef __ASSEMBLER__ +struct psw {uint64_t mask;uint64_t addr; }; -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define CR0_EXTM_SCLP 0X0000000000000200UL#define CR0_EXTM_EXTC 0X0000000000002000UL#define CR0_EXTM_EMGC 0X0000000000004000UL@@ -297,4 +303,5 @@ static inline uint32_t get_prefix(void)return current_prefix; } +#endif /* not __ASSEMBLER__ */ #endif s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int:
Quoted 8 lines
s390x/cstart64.S svc_int: · line 218
Quoted 4 lines
s390x/cstart64.S +1
-1.align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASKThat won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
Will change and define PSW_MASK_SHORT_PSW and PSW_RESET_MASK like:
#define PSW_MASK_SHORT_PSW 0x0008000000000000UL
...
#define PSW_EXCEPTION_MASK (PSW_MASK_EA | PSW_MASK_BA)
#define PSW_RESET_MASK (PSW_EXCEPTION_MASK | PSW_MASK_SHORT_PSW)
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 02/10] s390x: Use PSW bits definitions in cstart
Quoted 89 lines · Pierre Morel
Quoted 9 lines · Janosch Frank
Quoted 7 lines · Pierre Morel
This patch defines the PSW bits EA/BA used to initialize the PSW masks for exceptions.
Since some PSW mask definitions exist already in
arch_def.hwe add these definitions there.
We move all PSW definitions together and protect assembler code against C syntax.Quoted 4 lines
Please fix the issue mentioned below and run *all* tests against your new code to verify you didn't introduce regressions.
The rest looks good to me.
Thanks,
Quoted 61 lines
Quoted 13 lines
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 15 +++++++++++---- s390x/cstart64.S | 15 ++++++++------- 2 files changed, 19 insertions(+), 11 deletions(-)lib/s390x/asm/arch_def.h +0
-0lib/s390x/asm/arch_def.h line 19
Quoted 10 lines
lib/s390x/asm/arch_def.h +7
-0@@ -10,15 +10,21 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_BA 0x0000000080000000UL +#define PSW_MASK_EA 0x0000000100000000UL + +#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA)Could you add a space before and after the | ?
Quoted 35 lines
lib/s390x/asm/arch_def.h +4
-4+ +#ifndef __ASSEMBLER__ +struct psw {uint64_t mask;uint64_t addr; }; -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define CR0_EXTM_SCLP 0X0000000000000200UL#define CR0_EXTM_EXTC 0X0000000000002000UL#define CR0_EXTM_EMGC 0X0000000000004000UL@@ -297,4 +303,5 @@ static inline uint32_t get_prefix(void)return current_prefix; } +#endif /* not __ASSEMBLER__ */ #endif s390x/cstart64.S +1
-0@@ -12,6 +12,7 @@ */ #include <asm/asm-offsets.h> #include <asm/sigp.h> +#include <asm/arch_def.h> .section .init@@ -214,19 +215,19 @@ svc_int:Quoted 8 lines
s390x/cstart64.S svc_int: · line 218
Quoted 4 lines
s390x/cstart64.S +1
-1.align 8 reset_psw: - .quad 0x0008000180000000 + .quad PSW_EXCEPTION_MASKThat won't work, this is a short PSW and you're removing the short indication here. Notice the 0008 at the front.
Quoted 7 lines
Will change and define
PSW_MASK_SHORT_PSWandPSW_RESET_MASKlike:#define
PSW_MASK_SHORT_PSW0x0008000000000000UL
...#define
PSW_EXCEPTION_MASK(PSW_MASK_EA|PSW_MASK_BA)
#definePSW_RESET_MASK(PSW_EXCEPTION_MASK|PSW_MASK_SHORT_PSW)
Looks good to me, but please send out a new version.
PATCH v5 3/10 s390x: cr0: adding AFP-register control bit
In reply to Pierre MorelWhile adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
--- lib/s390x/asm/arch_def.h | 11 ++++++----- s390x/cstart64.S | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-)
lib/s390x/asm/arch_def.h +6 -5
@@ -18,6 +18,12 @@#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA) +#define CR0_EXTM_SCLP 0X0000000000000200UL +#define CR0_EXTM_EXTC 0X0000000000002000UL +#define CR0_EXTM_EMGC 0X0000000000004000UL +#define CR0_EXTM_MASK 0X0000000000006200UL +#define CR0_AFP_REG_CRTL 0x0000000000040000UL +#ifndef __ASSEMBLER__ struct psw {
@@ -25,11 +31,6 @@ struct psw {uint64_t addr; }; -#define CR0_EXTM_SCLP 0X0000000000000200UL -#define CR0_EXTM_EXTC 0X0000000000002000UL -#define CR0_EXTM_EMGC 0X0000000000004000UL -#define CR0_EXTM_MASK 0X0000000000006200UL -struct lowcore {uint8_t pad_0x0000[0x0080 -0x0000 ];/* 0x0000 */ uint32_t ext_int_param;/* 0x0080 */
s390x/cstart64.S +1 -1
@@ -230,4 +230,4 @@ svc_int_psw: .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ - .quad 0x0000000000040000 + .quad CR0_AFP_REG_CRTL
Signature · 1 line
2.17.0
Re: [kvm-unit-tests PATCH v5 03/10] s390x: cr0: adding AFP-register control bit
Quoted 45 lines · Pierre Morel
While adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 11 ++++++----- s390x/cstart64.S | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-)lib/s390x/asm/arch_def.h +6
-5@@ -18,6 +18,12 @@#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA) +#define CR0_EXTM_SCLP 0X0000000000000200UL +#define CR0_EXTM_EXTC 0X0000000000002000UL +#define CR0_EXTM_EMGC 0X0000000000004000UL +#define CR0_EXTM_MASK 0X0000000000006200UL +#define CR0_AFP_REG_CRTL 0x0000000000040000UL +#ifndef __ASSEMBLER__ struct psw {@@ -25,11 +31,6 @@ struct psw {uint64_t addr; }; -#define CR0_EXTM_SCLP 0X0000000000000200UL -#define CR0_EXTM_EXTC 0X0000000000002000UL -#define CR0_EXTM_EMGC 0X0000000000004000UL -#define CR0_EXTM_MASK 0X0000000000006200UL -struct lowcore {uint8_t pad_0x0000[0x0080 -0x0000 ];/* 0x0000 */ uint32_t ext_int_param;/* 0x0080 */ s390x/cstart64.S +0
-0
s390x/cstart64.S svc_int_psw: · line 233
Quoted 5 lines
s390x/cstart64.S +1
-1@@ -230,4 +230,4 @@ svc_int_psw: .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ - .quad 0x0000000000040000 + .quad CR0_AFP_REG_CRTL
Signature · 3 lines
Thanks, David / dhildenb
Re: [kvm-unit-tests PATCH v5 03/10] s390x: cr0: adding AFP-register control bit
Quoted 6 lines · David Hildenbrand
Quoted 5 lines · Pierre Morel
While adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
Signed-off-by Pierre Morel <[email protected]>
...snip...
Quoted 6 lines
s390x/cstart64.S svc_int_psw: · line 233
Quoted 3 lines
s390x/cstart64.S +1
-1- .quad 0x0000000000040000 + .quad CR0_AFP_REG_CRTLReviewed-by David Hildenbrand <[email protected]>
Thanks,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 03/10] s390x: cr0: adding AFP-register control bit
In reply to Pierre MorelQuoted 3 lines · Pierre Morel
While adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
How about:
s390x: Move control register bit definitions and add AFP to them
Quoted 47 lines
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 11 ++++++----- s390x/cstart64.S | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-)lib/s390x/asm/arch_def.h +6
-5@@ -18,6 +18,12 @@#define PSW_EXCEPTION_MASK (PSW_MASK_EA|PSW_MASK_BA) +#define CR0_EXTM_SCLP 0X0000000000000200UL +#define CR0_EXTM_EXTC 0X0000000000002000UL +#define CR0_EXTM_EMGC 0X0000000000004000UL +#define CR0_EXTM_MASK 0X0000000000006200UL +#define CR0_AFP_REG_CRTL 0x0000000000040000UL +#ifndef __ASSEMBLER__ struct psw {@@ -25,11 +31,6 @@ struct psw {uint64_t addr; }; -#define CR0_EXTM_SCLP 0X0000000000000200UL -#define CR0_EXTM_EXTC 0X0000000000002000UL -#define CR0_EXTM_EMGC 0X0000000000004000UL -#define CR0_EXTM_MASK 0X0000000000006200UL -struct lowcore {uint8_t pad_0x0000[0x0080 -0x0000 ];/* 0x0000 */ uint32_t ext_int_param;/* 0x0080 */ s390x/cstart64.S +1
-1@@ -230,4 +230,4 @@ svc_int_psw: .quad PSW_EXCEPTION_MASK, svc_int initial_cr0: /* enable AFP-register control, so FP regs (+BFP instr) can be used */ - .quad 0x0000000000040000 + .quad CR0_AFP_REG_CRTL
Re: [kvm-unit-tests PATCH v5 03/10] s390x: cr0: adding AFP-register control bit
Quoted 10 lines · Janosch Frank
Quoted 3 lines · Pierre Morel
While adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
How about:
s390x: Move control register bit definitions and add AFP to themReviewed-by Janosch Frank <[email protected]>
If no one disagree I'll pick it.
Thanks for the review
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 03/10] s390x: cr0: adding AFP-register control bit
In reply to Pierre MorelQuoted 10 lines · On Thu, 20 Feb 2020 13:00:36 +0100 Pierre Morel <[email protected]> wrote:
While adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 11 ++++++----- s390x/cstart64.S | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-)
Re: [kvm-unit-tests PATCH v5 03/10] s390x: cr0: adding AFP-register control bit
Quoted 7 lines · Cornelia Huck
Quoted 4 lines · On Thu, 20 Feb 2020 13:00:36 +0100 Pierre Morel <[email protected]> wrote:
While adding the definition for the AFP-Register control bit, move all existing definitions for CR0 out of the C zone to the assmbler zone to keep the definitions concerning CR0 together.
Quoted 9 lines
Quoted 6 lines
Signed-off-by Pierre Morel <[email protected]>--- lib/s390x/asm/arch_def.h | 11 ++++++----- s390x/cstart64.S | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-)Reviewed-by Cornelia Huck <[email protected]>
Thanks for the review,
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v5 4/10 s390x: interrupt registration
In reply to Pierre MorelLet's make it possible to add and remove a custom io interrupt handler, that can be used instead of the normal one.
--- lib/s390x/interrupt.c | 22 +++++++++++++++++++++- lib/s390x/interrupt.h | 7 +++++++ 2 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 lib/s390x/interrupt.h
lib/s390x/interrupt.c +21 -1
@@ -10,9 +10,9 @@* under the terms of the GNU Library General Public License version 2. */ #include <libcflat.h> -#include <asm/interrupt.h> #include <asm/barrier.h> #include <sclp.h> +#include <interrupt.h> static bool pgm_int_expected;static bool ext_int_expected;
@@ -144,12 +144,32 @@ void handle_mcck_int(void) stap(), lc->mcck_old_psw.addr); } +static void (*io_int_func)(void ); +void handle_io_int (void ) { +if (*io_int_func) +return (*io_int_func)();report_abort ("Unexpected io interrupt: on cpu %d at %#lx" ,stap (), lc->io_old_psw.addr); } +int register_io_int_func (void (*f)(void )) +{ +if (io_int_func) +return -1 ; + io_int_func = f; +return 0 ; +} + +int unregister_io_int_func (void (*f)(void )) +{ +if (io_int_func != f) +return -1 ; + io_int_func =NULL ; +return 0 ; +} +void handle_svc_int (void ) { report_abort("Unexpected supervisor call interrupt: on cpu %d at %#lx",
lib/s390x/interrupt.h new file +7 -0
@@ -0,0 +1,7 @@ +#ifndef __INTERRUPT_H +#include <asm/interrupt.h> + +int register_io_int_func (void (*f)(void )); +int unregister_io_int_func (void (*f)(void )); + +#endif
Signature · 1 line
2.17.0
Re: [kvm-unit-tests PATCH v5 04/10] s390x: interrupt registration
Quoted 18 lines · Pierre Morel
Let's make it possible to add and remove a custom io interrupt handler, that can be used instead of the normal one.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Thomas Huth <[email protected]>Reviewed-by David Hildenbrand <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- lib/s390x/interrupt.c | 22 +++++++++++++++++++++- lib/s390x/interrupt.h | 7 +++++++ 2 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 lib/s390x/interrupt.hlib/s390x/interrupt.c +0
-0
lib/s390x/interrupt.c line 15
Quoted 7 lines
lib/s390x/interrupt.c +1
-1@@ -10,9 +10,9 @@* under the terms of the GNU Library General Public License version 2. */ #include <libcflat.h> -#include <asm/interrupt.h> #include <asm/barrier.h> #include <sclp.h> +#include <interrupt.h>
Hrm
Quoted 22 lines
lib/s390x/interrupt.c +9
-0static bool pgm_int_expected;static bool ext_int_expected;@@ -144,12 +144,32 @@ void handle_mcck_int(void) stap(), lc->mcck_old_psw.addr); } +static void (*io_int_func)(void ); +void handle_io_int (void ) { +if (*io_int_func) +return (*io_int_func)();report_abort ("Unexpected io interrupt: on cpu %d at %#lx" ,stap (), lc->io_old_psw.addr); } +int register_io_int_func (void (*f)(void )) +{ +if (io_int_func) +return -1 ; + io_int_func = f;
lib/s390x/interrupt.c void handle_mcck_int(void) · line 171
Quoted 10 lines
lib/s390x/interrupt.c +10
-0+return 0 ; +} + +int unregister_io_int_func (void (*f)(void )) +{ +if (io_int_func != f) +return -1 ; + io_int_func =NULL ; +return 0 ; +}
I'm currently working on something similar for PGMs and I see no additional value in two functions for this. Unregistering can be done by doing register_io_int_func(NULL)
This should be enough:
int register_io_int_func(void (*f)(void))
{
io_int_func = f;
}Quoted 18 lines
lib/s390x/interrupt.c +1
-0+void handle_svc_int (void ) { report_abort("Unexpected supervisor call interrupt: on cpu %d at %#lx",lib/s390x/interrupt.h new file +7
-0@@ -0,0 +1,7 @@ +#ifndef __INTERRUPT_H +#include <asm/interrupt.h> + +int register_io_int_func (void (*f)(void )); +int unregister_io_int_func (void (*f)(void )); + +#endif
Re: [kvm-unit-tests PATCH v5 04/10] s390x: interrupt registration
Quoted 66 lines · Janosch Frank
Quoted 18 lines · Pierre Morel
Let's make it possible to add and remove a custom io interrupt handler, that can be used instead of the normal one.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Thomas Huth <[email protected]>Reviewed-by David Hildenbrand <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- lib/s390x/interrupt.c | 22 +++++++++++++++++++++- lib/s390x/interrupt.h | 7 +++++++ 2 files changed, 28 insertions(+), 1 deletion(-)create mode 100644
lib/s390x/interrupt.hlib/s390x/interrupt.c +0
-0lib/s390x/interrupt.c line 15
Quoted 7 lines
lib/s390x/interrupt.c +1
-1@@ -10,9 +10,9 @@* under the terms of the GNU Library General Public License version 2. */ #include <libcflat.h> -#include <asm/interrupt.h> #include <asm/barrier.h> #include <sclp.h> +#include <interrupt.h> Hrm
Quoted 22 lines
lib/s390x/interrupt.c +9
-0static bool pgm_int_expected;static bool ext_int_expected;@@ -144,12 +144,32 @@ void handle_mcck_int(void) stap(), lc->mcck_old_psw.addr); } +static void (*io_int_func)(void ); +void handle_io_int (void ) { +if (*io_int_func) +return (*io_int_func)();report_abort ("Unexpected io interrupt: on cpu %d at %#lx" ,stap (), lc->io_old_psw.addr); } +int register_io_int_func (void (*f)(void )) +{ +if (io_int_func) +return -1 ; + io_int_func = f;lib/s390x/interrupt.c void handle_mcck_int(void) · line 171
Quoted 10 lines
lib/s390x/interrupt.c +10
-0+return 0 ; +} + +int unregister_io_int_func (void (*f)(void )) +{ +if (io_int_func != f) +return -1 ; + io_int_func =NULL ; +return 0 ; +}I'm currently working on something similar for PGMs and I see no additional value in two functions for this. Unregistering can be done by doing
register_io_int_func(NULL)
Quoted 7 lines
This should be enough:
int
register_io_int_func(void (*f)(void)){ io_int_func = f; }
There are several ways to do this and I really don't mind how it is done. Since it has been reviewed by, I would like to have the others reviewers opinion.
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Re: [kvm-unit-tests PATCH v5 04/10] s390x: interrupt registration
Quoted 46 lines · On Fri, 24 Apr 2020 12:44:16 +0200 Pierre Morel <[email protected]> wrote:
Quoted 45 lines · Janosch Frank
Quoted 29 lines · Pierre Morel
Let's make it possible to add and remove a custom io interrupt handler, that can be used instead of the normal one.
Signed-off-by Pierre Morel <[email protected]>Reviewed-by Thomas Huth <[email protected]>Reviewed-by David Hildenbrand <[email protected]>Reviewed-by Janosch Frank <[email protected]>--- lib/s390x/interrupt.c | 22 +++++++++++++++++++++- lib/s390x/interrupt.h | 7 +++++++ 2 files changed, 28 insertions(+), 1 deletion(-)create mode 100644
lib/s390x/interrupt.hlib/s390x/interrupt.c +9
-0+static void (*io_int_func)(void ); +void handle_io_int (void ) { +if (*io_int_func) +return (*io_int_func)();report_abort ("Unexpected io interrupt: on cpu %d at %#lx" ,stap (), lc->io_old_psw.addr); } +int register_io_int_func (void (*f)(void )) +{ +if (io_int_func) +return -1 ; + io_int_func = f;lib/s390x/interrupt.c void handle_mcck_int(void) · line 171
Quoted 10 lines
lib/s390x/interrupt.c +10
-0+return 0 ; +} + +int unregister_io_int_func (void (*f)(void )) +{ +if (io_int_func != f) +return -1 ; + io_int_func =NULL ; +return 0 ; +}I'm currently working on something similar for PGMs and I see no additional value in two functions for this. Unregistering can be done by doing
register_io_int_func(NULL)
Quoted 6 lines
Quoted 6 lines
This should be enough:
int
register_io_int_func(void (*f)(void)){ io_int_func = f; }
You can even make this void :)
Quoted 4 lines
Quoted 1 line
There are several ways to do this and I really don't mind how it is done. Since it has been reviewed by, I would like to have the others reviewers opinion.
One version might make it easier to catch programming errors, while the other one is more compact. I don't really have a preference on this, either is fine with me.
PATCH v5 5/10 s390x: export the clock get_clock_ms() utility
In reply to Pierre MorelLet's move get_clock_ms() to lib/s390/asm/time.h, so it can be used in multiple places.
--- lib/s390x/asm/time.h | 26 ++++++++++++++++++++++++++ s390x/intercept.c | 11 +---------- 2 files changed, 27 insertions(+), 10 deletions(-) create mode 100644 lib/s390x/asm/time.h
lib/s390x/asm/time.h new file +26 -0
@@ -0,0 +1,26 @@ +/* +* Clock utilities for s390 +* +* Authors: +* Thomas Huth <[email protected]> +* +* Copied from the s390/intercept test by: +* Pierre Morel <[email protected]> +* +* This code is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2. +*/ +#ifndef _ASM_S390X_TIME_H_ +#define _ASM_S390X_TIME_H_ + +static inline uint64_t get_clock_ms (void ) +{ +uint64_t clk; + + asmvolatile (" stck %0 " : :"Q" (clk) :"memory" ); + +/* Bit 51 is incrememented each microsecond */ +return (clk >> (63 -51 )) /1000 ; +} + +#endif
s390x/intercept.c +1 -10
@@ -14,6 +14,7 @@#include <asm/interrupt.h> #include <asm/page.h> #include <asm/facility.h> +#include <asm/time.h> static uint8_t pagebuf[PAGE_SIZE * 2] __attribute__((aligned(PAGE_SIZE * 2)));
@@ -153,16 +154,6 @@ static void test_testblock(void)check_pgm_int_code (PGM_INT_CODE_ADDRESSING ); } -static uint64_t get_clock_ms (void ) -{ -uint64_t clk; - - asmvolatile (" stck %0 " : :"Q" (clk) :"memory" ); - -/* Bit 51 is incrememented each microsecond */ -return (clk >> (63 -51 )) /1000 ; -} -struct {const char *name;void (*func)(void );
Signature · 1 line
2.17.0
Re: [kvm-unit-tests PATCH v5 05/10] s390x: export the clock get_clock_ms() utility
Quoted 7 lines · On Thu, 20 Feb 2020 13:00:38 +0100 Pierre Morel <[email protected]> wrote:
Let's move
get_clock_ms()tolib/s390/asm/time.h, so it can be used in multiple places.Signed-off-by Pierre Morel <[email protected]>Reviewed-by David Hildenbrand <[email protected]>Reviewed-by Thomas Huth <[email protected]>Reviewed-by Janosch Frank <[email protected]>
Quoted 5 lines
--- lib/s390x/asm/time.h | 26 ++++++++++++++++++++++++++ s390x/intercept.c | 11 +---------- 2 files changed, 27 insertions(+), 10 deletions(-) create mode 100644 lib/s390x/asm/time.h
Re: [kvm-unit-tests PATCH v5 05/10] s390x: export the clock get_clock_ms() utility
Quoted 16 lines · Cornelia Huck
Quoted 7 lines · On Thu, 20 Feb 2020 13:00:38 +0100 Pierre Morel <[email protected]> wrote:
Let's move
get_clock_ms()tolib/s390/asm/time.h, so it can be used in multiple places.Signed-off-by Pierre Morel <[email protected]>Reviewed-by David Hildenbrand <[email protected]>Reviewed-by Thomas Huth <[email protected]>Reviewed-by Janosch Frank <[email protected]>Quoted 5 lines
--- lib/s390x/asm/time.h | 26 ++++++++++++++++++++++++++ s390x/intercept.c | 11 +---------- 2 files changed, 27 insertions(+), 10 deletions(-)create mode 100644
lib/s390x/asm/time.h
Quoted 2 lines
Reviewed-by Cornelia Huck <[email protected]>
Thanks for the review,
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v5 6/10 s390x: Library resources for CSS tests
In reply to Pierre MorelThese are the include and library utilities for the css tests patch series.
Debug function can be activated by defining DEBUG_CSS before the inclusion of the css.h header file.
--- lib/s390x/css.h | 256 +++++++++++++++++++++++++++++++++++++++++++ lib/s390x/css_dump.c | 157 ++++++++++++++++++++++++++ 2 files changed, 413 insertions(+) create mode 100644 lib/s390x/css.h create mode 100644 lib/s390x/css_dump.c
lib/s390x/css.h new file +256 -0
@@ -0,0 +1,256 @@ +/* +* CSS definitions +* +* Copyright IBM, Corp. 2019 +* Author: Pierre Morel <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or (at +* your option) any later version. See the COPYING file in the top-level +* directory. +*/ + +#ifndef CSS_H +#define CSS_H + +#define CCW_F_CD 0x80 +#define CCW_F_CC 0x40 +#define CCW_F_SLI 0x20 +#define CCW_F_SKP 0x10 +#define CCW_F_PCI 0x08 +#define CCW_F_IDA 0x04 +#define CCW_F_S 0x02 +#define CCW_F_MIDA 0x01 + +#define CCW_C_NOP 0x03 +#define CCW_C_TIC 0x08 + +struct ccw1 { +unsigned char code; +unsigned char flags; +unsigned short count; +uint32_t data_address; +} __attribute__ ((aligned (4 ))); + +#define ORB_M_KEY 0xf0000000 +#define ORB_F_SUSPEND 0x08000000 +#define ORB_F_STREAMING 0x04000000 +#define ORB_F_MODIFCTRL 0x02000000 +#define ORB_F_SYNC 0x01000000 +#define ORB_F_FORMAT 0x00800000 +#define ORB_F_PREFETCH 0x00400000 +#define ORB_F_INIT_IRQ 0x00200000 +#define ORB_F_ADDRLIMIT 0x00100000 +#define ORB_F_SUSP_IRQ 0x00080000 +#define ORB_F_TRANSPORT 0x00040000 +#define ORB_F_IDAW2 0x00020000 +#define ORB_F_IDAW_2K 0x00010000 +#define ORB_M_LPM 0x0000ff00 +#define ORB_F_LPM_DFLT 0x00008000 +#define ORB_F_ILSM 0x00000080 +#define ORB_F_CCW_IND 0x00000040 +#define ORB_F_ORB_EXT 0x00000001 + +struct orb { +uint32_t intparm; +uint32_t ctrl; +uint32_t cpa; +uint32_t prio; +uint32_t reserved[4 ]; +} __attribute__ ((aligned (4 ))); + +struct scsw { +uint32_t ctrl; +uint32_t ccw_addr; +uint8_t dev_stat; +uint8_t sch_stat; +uint16_t count; +}; + +struct pmcw { +uint32_t intparm; +#define PMCW_DNV 0x0001 +#define PMCW_ENABLE 0x0080 +uint16_t flags; +uint16_t devnum; +uint8_t lpm; +uint8_t pnom; +uint8_t lpum; +uint8_t pim; +uint16_t mbi; +uint8_t pom; +uint8_t pam; +uint8_t chpid[8 ]; +uint32_t flags2; +}; + +struct schib { +struct pmcw pmcw; +struct scsw scsw; +uint8_t md[12 ]; +} __attribute__ ((aligned (4 ))); + +struct irb { +struct scsw scsw; +uint32_t esw[5 ]; +uint32_t ecw[8 ]; +uint32_t emw[8 ]; +} __attribute__ ((aligned (4 ))); + +/* CSS low level access functions */ + +static inline int ssch (unsigned long schid,struct orb *addr) +{ + register long long reg1 asm("1") = schid; +int cc; + + asmvolatile ( +" ssch 0(%2)\n" +" ipm %0\n" +" srl %0,28\n" + :"=d" (cc) + :"d" (reg1),"a" (addr),"m" (*addr) + :"cc" ,"memory" ); +return cc; +} + +static inline int stsch (unsigned long schid,struct schib *addr) +{ + register unsigned long reg1 asm ("1") = schid; +int cc; + + asmvolatile ( +" stsch 0(%3)\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc),"=m" (*addr) + :"d" (reg1),"a" (addr) + :"cc" ); +return cc; +} + +static inline int msch (unsigned long schid,struct schib *addr) +{ + register unsigned long reg1 asm ("1") = schid; +int cc; + + asmvolatile ( +" msch 0(%3)\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc),"=m" (*addr) + :"d" (reg1),"a" (addr) + :"cc" ); +return cc; +} + +static inline int tsch (unsigned long schid,struct irb *addr) +{ + register unsigned long reg1 asm ("1") = schid; +int cc; + + asmvolatile ( +" tsch 0(%3)\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc),"=m" (*addr) + :"d" (reg1),"a" (addr) + :"cc" ); +return cc; +} + +static inline int hsch (unsigned long schid) +{ + register unsigned long reg1 asm("1") = schid; +int cc; + + asmvolatile ( +" hsch\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc) + :"d" (reg1) + :"cc" ); +return cc; +} + +static inline int xsch (unsigned long schid) +{ + register unsigned long reg1 asm("1") = schid; +int cc; + + asmvolatile ( +" xsch\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc) + :"d" (reg1) + :"cc" ); +return cc; +} + +static inline int csch (unsigned long schid) +{ + register unsigned long reg1 asm("1") = schid; +int cc; + + asmvolatile ( +" csch\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc) + :"d" (reg1) + :"cc" ); +return cc; +} + +static inline int rsch (unsigned long schid) +{ + register unsigned long reg1 asm("1") = schid; +int cc; + + asmvolatile ( +" rsch\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc) + :"d" (reg1) + :"cc" ); +return cc; +} + +static inline int rchp (unsigned long chpid) +{ + register unsigned long reg1 asm("1") = chpid; +int cc; + + asmvolatile ( +" rchp\n" +" ipm %0\n" +" srl %0,28" + :"=d" (cc) + :"d" (reg1) + :"cc" ); +return cc; +} + +/* Debug functions */ +char *dump_pmcw_flags (uint16_t f); +char *dump_scsw_flags (uint32_t f); + +#ifdef DEBUG_CSS +void dump_scsw (struct scsw *); +void dump_irb (struct irb *irbp); +void dump_schib (struct schib *sch); +struct ccw *dump_ccw (struct ccw *cp); +#else +static inline void dump_scsw (struct scsw *scsw) {} +static inline void dump_irb (struct irb *irbp) {} +static inline void dump_pmcw (struct pmcw *p) {} +static inline void dump_schib (struct schib *sch) {} +static inline void dump_orb (struct orb *op) {} +static inline struct ccw *dump_ccw (struct ccw *cp) +{ +return NULL ; +} +#endif /* DEBUG_CSS */ +#endif
lib/s390x/css_dump.c new file +157 -0
157 lines not on this page · raw message
Signature · 1 line
2.17.0
PATCH v5 7/10 s390x: css: stsch, enumeration test
In reply to Pierre MorelFirst step for testing the channel subsystem is to enumerate the css and retrieve the css devices.
This tests the success of STSCH I/O instruction, we do not test the reaction of the VM for an instruction with wrong parameters.
--- lib/s390x/css.h | 1 + s390x/Makefile | 2 + s390x/css.c | 91 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 4 ++ 4 files changed, 98 insertions(+) create mode 100644 s390x/css.c
lib/s390x/css.h +1 -0
@@ -82,6 +82,7 @@ struct pmcw {uint8_t chpid[8 ];uint32_t flags2; }; +#define PMCW_CHANNEL_TYPE (pmcw) (pmcw->flags2 >> 21)struct schib {struct pmcw pmcw;
s390x/Makefile +2 -0
@@ -17,6 +17,7 @@ tests += $(TEST_DIR)/stsi.elf tests += $(TEST_DIR)/skrf.elf tests += $(TEST_DIR)/smp.elf tests += $(TEST_DIR)/sclp.elf +tests += $(TEST_DIR)/css.elf tests_binary = $(patsubst %.elf,%.bin,$(tests)) all: directories test_cases test_cases_binary
@@ -51,6 +52,7 @@ cflatobjs += lib/s390x/sclp-console.o cflatobjs += lib/s390x/interrupt.o cflatobjs += lib/s390x/mmu.o cflatobjs += lib/s390x/smp.o +cflatobjs += lib/s390x/css_dump.o OBJDIRS += lib/s390x
s390x/css.c new file +91 -0
91 lines not on this page · raw message
s390x/unittests.cfg +4 -0
@@ -83,3 +83,7 @@ extra_params = -m 1G [sclp-3g] file = sclp.elf extra_params = -m 3G + +[css] +file = css.elf +extra_params =-device ccw-pong
Signature · 1 line
2.17.0
PATCH v5 8/10 s390x: css: msch, enable test
In reply to Pierre MorelA second step when testing the channel subsystem is to prepare a channel for use.
This includes:
- Get the current SubCHannel Information Block (SCHIB) using STSCH
- Update it in memory to set the ENABLE bit
- Tell the CSS that the SCHIB has been modified using MSCH
- Get the SCHIB from the CSS again to verify that the subchannel is enabled.
This tests the MSCH instruction to enable a channel succesfuly. This is NOT a routine to really enable the channel, no retry is done, in case of error, a report is made.
--- s390x/css.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
s390x/css.c +49 -0
@@ -19,6 +19,7 @@#include <asm/time.h> #include <css.h> +#include <asm/time.h> #define SID_ONE 0x00010000
@@ -67,11 +68,59 @@ out: scn, scn_found, dev_found); } +static void test_enable (void ) +{ +struct pmcw *pmcw = &schib.pmcw; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } +/* Read the SCHIB for this subchannel */ + cc =stsch (test_device_sid, &schib); +if (cc) { +report (0 ,"stsch cc=%d" , cc); +return ; + } + +/* Update the SCHIB to enable the channel */ + pmcw->flags |=PMCW_ENABLE ; + +/* Tell the CSS we want to modify the subchannel */ + cc =msch (test_device_sid, &schib); +if (cc) { +/* +* If the subchannel is status pending or +* if a function is in progress, +* we consider both cases as errors. +*/ +report (0 ,"msch cc=%d" , cc); +return ; + } + +/* +* Read the SCHIB again to verify the enablement +*/ + cc =stsch (test_device_sid, &schib); +if (cc) { +report (0 ,"stsch cc=%d" , cc); +return ; + } + +if (!(pmcw->flags &PMCW_ENABLE )) { +report (0 ,"Enable failed. pmcw: %x" , pmcw->flags); +return ; + } +report (1 ,"Tested" ); +} +static struct {const char *name;void (*func)(void ); } tests[] = { {"enumerate (stsch)" , test_enumerate }, + {"enable (msch)" , test_enable }, {NULL ,NULL } };
Signature · 1 line
2.17.0
PATCH v5 9/10 s390x: css: ssch/tsch with sense and interrupt
In reply to Pierre MorelWe add a new css_lib file to contain the I/O function we may share with different tests.
First function is the subchannel_enable() function.
When a channel is enabled we can start a SENSE ID command using the SSCH instruction to recognize the control unit and device.
This tests the success of SSCH, the I/O interruption and the TSCH instructions.
The test expects a device with a control unit type of 0xC0CA as the first subchannel of the CSS.
--- lib/s390x/asm/arch_def.h | 1 + lib/s390x/asm/time.h | 10 +++ lib/s390x/css.h | 20 ++++++ lib/s390x/css_lib.c | 55 ++++++++++++++ s390x/Makefile | 1 + s390x/css.c | 152 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 239 insertions(+) create mode 100644 lib/s390x/css_lib.c
lib/s390x/asm/arch_def.h +1 -0
@@ -10,6 +10,7 @@#ifndef _ASM_S390X_ARCH_DEF_H_#define _ASM_S390X_ARCH_DEF_H_ +#define PSW_MASK_IO 0x0200000000000000UL#define PSW_MASK_EXT 0x0100000000000000UL#define PSW_MASK_DAT 0x0400000000000000UL#define PSW_MASK_PSTATE 0x0001000000000000UL
lib/s390x/asm/time.h +10 -0
@@ -23,4 +23,14 @@ static inline uint64_t get_clock_ms(void) return (clk >> (63 - 51)) / 1000; } +static inline void delay (unsigned long ms) +{ +unsigned long startclk; + + startclk =get_clock_ms (); +for (;;) +if (get_clock_ms () - startclk > ms) +break ; +} +#endif
lib/s390x/css.h +20 -0
@@ -97,6 +97,19 @@ struct irb {uint32_t emw[8 ]; } __attribute__ ((aligned(4))); +#define CCW_CMD_SENSE_ID 0xe4 +#define PONG_CU 0xc0ca +struct senseid { +/* common part */ +uint8_t reserved;/* always 0x'FF' */ +uint16_t cu_type;/* control unit type */ +uint8_t cu_model;/* control unit model */ +uint16_t dev_type;/* device type */ +uint8_t dev_model;/* device model */ +uint8_t unused;/* padding byte */ +uint8_t padding[256 -10 ];/* Extra padding for CCW */ +} __attribute__ ((aligned(4))) __attribute__ ((packed)); +/* CSS low level access functions */ static inline int ssch (unsigned long schid,struct orb *addr)
@@ -254,4 +267,11 @@ static inline struct ccw *dump_ccw(struct ccw *cp)return NULL ; }#endif /* DEBUG_CSS */ + +#define SID_ONE 0x00010000 + +/* Library functions */ +int enable_subchannel (unsigned int sid); +int start_ccw1_chain (unsigned int sid,struct ccw1 *ccw); +#endif
lib/s390x/css_lib.c new file +55 -0
55 lines not on this page · raw message
s390x/Makefile +1 -0
@@ -53,6 +53,7 @@ cflatobjs += lib/s390x/interrupt.o cflatobjs += lib/s390x/mmu.o cflatobjs += lib/s390x/smp.o cflatobjs += lib/s390x/css_dump.o +cflatobjs += lib/s390x/css_lib.o OBJDIRS += lib/s390x
s390x/css.c +152 -0
173 lines not on this page · raw message
Signature · 1 line
2.17.0
PATCH v5 10/10 s390x: css: ping pong
In reply to Pierre MorelTo test a write command with the SSCH instruction we need a QEMU device, with control unit type 0xC0CA. The PONG device is such a device.
This type of device responds to PONG_WRITE requests by incrementing an integer, stored as a string at offset 0 of the CCW data.
--- s390x/css.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
s390x/css.c +49 -0
@@ -25,6 +25,12 @@#define PSW_PRG_MASK (PSW_MASK_IO | PSW_MASK_EA | PSW_MASK_BA)#define PONG_CU_TYPE 0xc0ca +/* Channel Commands for PONG device */ +#define PONG_WRITE 0x21/* Write */ +#define PONG_READ 0x22/* Read buffer */ + +#define BUFSZ 9 +static char buffer[BUFSZ ];struct lowcore *lowcore = (void *)0x0 ;
@@ -266,6 +272,48 @@ unreg_cb:unregister_io_int_func (irq_io); } +static void test_ping (void ) +{ +int success, result; +int cnt =0 , max =4 ; + +if (senseid.cu_type !=PONG_CU ) { +report_skip ("No PONG, no ping-pong" ); +return ; + } + + result =register_io_int_func (irq_io); +if (result) { +report (0 ,"Could not register IRQ handler" ); +return ; + } + +while (cnt++ < max) { +snprintf (buffer,BUFSZ ,"%08x\n" , cnt); + success =start_subchannel (PONG_WRITE , buffer,BUFSZ ); +if (!success) { +report (0 ,"start_subchannel failed" ); + goto unreg_cb; + } +delay (100 ); + success =start_subchannel (PONG_READ , buffer,BUFSZ ); +if (!success) { +report (0 ,"start_subchannel failed" ); + goto unreg_cb; + } + result =atol (buffer); +if (result != (cnt +1 )) { +report (0 ,"Bad answer from pong: %08x - %08x" , + cnt, result); + goto unreg_cb; + } + } +report (1 ,"ping-pong count 0x%08x" , cnt); + +unreg_cb: +unregister_io_int_func (irq_io); +} + static struct { const char *name; void (*func)(void);
@@ -273,6 +321,7 @@ static struct { { "enumerate (stsch)", test_enumerate }, { "enable (msch)", test_enable }, { "sense (ssch/tsch)", test_sense }, + { "ping-pong (ssch/tsch)", test_ping }, { NULL, NULL } };
Signature · 1 line
2.17.0
On 2020-02-20 13:00, Pierre Morel wrote:
...snip...
Quoted 7 lines
Pierre Morel (10):
s390x: saving regs for interrupts s390x: Use PSW bits definitions in cstart s390x: cr0: adding AFP-register control bit s390x: export the clock get_clock_ms() utility
Please can you consider applying these 4 patches only. I will send some changes I made for the patches on css tests.
I did not change the interrupt registration but since it is introduced for the css test patches I resend it with them.
Thanks,
Pierre
Quoted 28 lines
s390x: interrupt registration s390x: Library resources for CSS tests s390x: css: stsch, enumeration test s390x: css: msch, enable test s390x: css: ssch/tsch with sense and interrupt s390x: css: ping ponglib/s390x/asm/arch_def.h | 19 ++- lib/s390x/asm/time.h | 36 +++++ lib/s390x/css.h | 277 +++++++++++++++++++++++++++++++ lib/s390x/css_dump.c | 157 ++++++++++++++++++ lib/s390x/css_lib.c | 55 +++++++ lib/s390x/interrupt.c | 22 ++- lib/s390x/interrupt.h | 7 + s390x/Makefile | 3 + s390x/css.c | 341 +++++++++++++++++++++++++++++++++++++++ s390x/cstart64.S | 40 +++-- s390x/intercept.c | 11 +- s390x/unittests.cfg | 4 + 12 files changed, 946 insertions(+), 26 deletions(-)create mode 100644
lib/s390x/asm/time.h
create mode 100644lib/s390x/css.h
create mode 100644lib/s390x/css_dump.c
create mode 100644lib/s390x/css_lib.c
create mode 100644lib/s390x/interrupt.h
create mode 100644s390x/css.c
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
Quoted 8 lines · Pierre Morel
On 2020-02-20 13:00, Pierre Morel wrote:
...snip...
Quoted 2 lines
Quoted 9 lines
Quoted 5 lines
Pierre Morel (10):
s390x: saving regs for interrupts s390x: Use PSW bits definitions in cstart s390x: cr0: adding AFP-register control bit s390x: export the clock get_clock_ms() utilityPlease can you consider applying these 4 patches only. I will send some changes I made for the patches on css tests.
The first one requires a little more brain power - can anybody at IBM help reviewing that?
Signature · 3 lines
Thanks, David / dhildenb
Quoted 15 lines · David Hildenbrand
Quoted 14 lines · Pierre Morel
On 2020-02-20 13:00, Pierre Morel wrote:
...snip...
Quoted 7 lines
Pierre Morel (10):
s390x: saving regs for interrupts s390x: Use PSW bits definitions in cstart s390x: cr0: adding AFP-register control bit s390x: export the clock get_clock_ms() utility
Quoted 7 lines
Quoted 3 lines
Please can you consider applying these 4 patches only. I will send some changes I made for the patches on css tests.
The first one requires a little more brain power - can anybody at IBM help reviewing that?
I'll try to understand it :)
But I think we need a new series anyway.
@Pierre: You told me, that you removed delay() and this series still has it. With the changes needed to the second patch and the delay change we need all information to make decisions, so a new version of the series would make sense.
Quoted 24 lines · Janosch Frank
Quoted 15 lines · David Hildenbrand
Quoted 14 lines · Pierre Morel
On 2020-02-20 13:00, Pierre Morel wrote:
...snip...
Quoted 7 lines
Pierre Morel (10):
s390x: saving regs for interrupts s390x: Use PSW bits definitions in cstart s390x: cr0: adding AFP-register control bit s390x: export the clock get_clock_ms() utilityQuoted 7 lines
Quoted 3 lines
Please can you consider applying these 4 patches only. I will send some changes I made for the patches on css tests.
The first one requires a little more brain power - can anybody at IBM help reviewing that?
Quoted 9 lines
I'll try to understand it :)
But I think we need a new series anyway.
@Pierre: You told me, that you removeddelay()and this series still has it. With the changes needed to the second patch and the delay change we need all information to make decisions, so a new version of the series would make sense.
Yes, this is clear, the next series will have some modifications for the css part.
Also I will send two series, first the general patches with bug fixes and comments and in a separate series the css specific patches.
Regards,
Pierre
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen