Skip to contentSkip to conversation

ath10k: enable rx duration report default for wmi tlv

PATCH In review Wen Gong 2 participants 3 messages Apr 23, 2020 – Apr 27, 2020 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Wen Gong

author
#0 lore raw

PATCH 1/1 ath10k: enable rx duration report default for wmi tlv

When run command "iw dev wlan0 station dump", the rx duration is 0. When firmware indicate WMI_UPDATE_STATS_EVENTID, extended flag of statsis not set by default, so firmware do not report rx duration.

one sample:
localhost # iw wlan0 station dump
Station c4:04:15:5d:97:22 (on wlan0)

        inactive time:  48 ms
        rx bytes:       21670
        rx packets:     147
        tx bytes:       11529
        tx packets:     100
        tx retries:     88
        tx failed:      36
        beacon loss:    1
        beacon rx:      31
        rx drop misc:   47
        signal:         -72 [-74, -75] dBm
        signal avg:     -71 [-74, -75] dBm

beacon signal avg: -71 dBm
tx bitrate: 54.0 MBit/s MCS 3 40MHz
rx bitrate: 1.0 MBit/s
rx duration: 0 us

This patch enable firmware's extened flag of stats by setting flag WMI_TLV_STAT_PEER_EXTD of ar->fw_stats_req_mask which is set in ath10k_core_init_firmware_features via WMI_REQUEST_STATS_CMDID.

After apply this patch, rx duration show value with the command:
Station c4:04:15:5d:97:22 (on wlan0)

        inactive time:  883 ms
        rx bytes:       44289
        rx packets:     265
        tx bytes:       10838
        tx packets:     93
        tx retries:     899
        tx failed:      103
        beacon loss:    0
        beacon rx:      78
        rx drop misc:   46
        signal:         -71 [-74, -76] dBm
        signal avg:     -70 [-74, -76] dBm

beacon signal avg: -70 dBm
tx bitrate: 54.0 MBit/s MCS 3 40MHz
rx bitrate: 1.0 MBit/s
rx duration: 358004 us

This patch do not have side effect for all chips, because function ath10k_debug_fw_stats_request is already exported to debugfs "fw_stats" and WMI_REQUEST_STATS_CMDID is safely sent after condition checked by ath10k_peer_stats_enabled in ath10k_sta_statistics.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

---
 drivers/net/wireless/ath/ath10k/debug.c | 2 +-
 drivers/net/wireless/ath/ath10k/debug.h | 8 ++++++++
 drivers/net/wireless/ath/ath10k/mac.c   | 2 ++
 3 files changed, 11 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/debug.c +1 -1
index 69139c2e6f82..e8250a665433 100644
@@ -349,7 +349,7 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 	spin_unlock_bh(&ar->data_lock);
 }
 
-static int ath10k_debug_fw_stats_request(struct ath10k *ar)
+int ath10k_debug_fw_stats_request(struct ath10k *ar)
 {
 	unsigned long timeout, time_left;
 	int ret;
drivers/net/wireless/ath/ath10k/debug.h +8 -0
index 82f7eb8583d9..4cbfd9279d6f 100644
@@ -125,6 +125,9 @@ static inline int ath10k_debug_is_extd_tx_stats_enabled(struct ath10k *ar)
 {
 	return ar->debug.enable_extd_tx_stats;
 }
+
+int ath10k_debug_fw_stats_request(struct ath10k *ar);
+
 #else
 
 static inline int ath10k_debug_start(struct ath10k *ar)
@@ -192,6 +195,11 @@ static inline int ath10k_debug_is_extd_tx_stats_enabled(struct ath10k *ar)
 	return 0;
 }
 
+static inline int ath10k_debug_fw_stats_request(struct ath10k *ar)
+{
+	return 0;
+}
+
 #define ATH10K_DFS_STAT_INC(ar, c) do { } while (0)
 
 #define ath10k_debug_get_et_strings NULL
drivers/net/wireless/ath/ath10k/mac.c +2 -0
index 6791c0035be0..ea5a26ea9b32 100644
@@ -8306,6 +8306,8 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
 	if (!ath10k_peer_stats_enabled(ar))
 		return;
 
+	ath10k_debug_fw_stats_request(ar);
+
 	sinfo->rx_duration = arsta->rx_duration;
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
 
Signature · 1 line
2.23.0
#1 lore raw
Quoted 52 lines · Wen Gong

When run command "iw dev wlan0 station dump", the rx duration is 0. When firmware indicate WMI_UPDATE_STATS_EVENTID, extended flag of statsis not set by default, so firmware do not report rx duration.

one sample:
localhost # iw wlan0 station dump
Station c4:04:15:5d:97:22 (on wlan0)

        inactive time:  48 ms
        rx bytes:       21670
        rx packets:     147
        tx bytes:       11529
        tx packets:     100
        tx retries:     88
        tx failed:      36
        beacon loss:    1
        beacon rx:      31
        rx drop misc:   47
        signal:         -72 [-74, -75] dBm
        signal avg:     -71 [-74, -75] dBm

beacon signal avg: -71 dBm
tx bitrate: 54.0 MBit/s MCS 3 40MHz
rx bitrate: 1.0 MBit/s
rx duration: 0 us

This patch enable firmware's extened flag of stats by setting flag WMI_TLV_STAT_PEER_EXTD of ar->fw_stats_req_mask which is set in ath10k_core_init_firmware_features via WMI_REQUEST_STATS_CMDID.

After apply this patch, rx duration show value with the command:
Station c4:04:15:5d:97:22 (on wlan0)

        inactive time:  883 ms
        rx bytes:       44289
        rx packets:     265
        tx bytes:       10838
        tx packets:     93
        tx retries:     899
        tx failed:      103
        beacon loss:    0
        beacon rx:      78
        rx drop misc:   46
        signal:         -71 [-74, -76] dBm
        signal avg:     -70 [-74, -76] dBm

beacon signal avg: -70 dBm
tx bitrate: 54.0 MBit/s MCS 3 40MHz
rx bitrate: 1.0 MBit/s
rx duration: 358004 us

This patch do not have side effect for all chips, because function ath10k_debug_fw_stats_request is already exported to debugfs "fw_stats" and WMI_REQUEST_STATS_CMDID is safely sent after condition checked by ath10k_peer_stats_enabled in ath10k_sta_statistics.

Quoted 4 lines

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Patch applied to ath-next branch of ath.git, thanks.

4913e675630e ath10k: enable rx duration report default for wmi tlv

Signature · 3 lines
https://patchwork.kernel.org/patch/11504895/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#2 lore raw
In reply to Wen Gong
Quoted 52 lines · Wen Gong

When run command "iw dev wlan0 station dump", the rx duration is 0. When firmware indicate WMI_UPDATE_STATS_EVENTID, extended flag of statsis not set by default, so firmware do not report rx duration.

one sample:
localhost # iw wlan0 station dump
Station c4:04:15:5d:97:22 (on wlan0)

        inactive time:  48 ms
        rx bytes:       21670
        rx packets:     147
        tx bytes:       11529
        tx packets:     100
        tx retries:     88
        tx failed:      36
        beacon loss:    1
        beacon rx:      31
        rx drop misc:   47
        signal:         -72 [-74, -75] dBm
        signal avg:     -71 [-74, -75] dBm

beacon signal avg: -71 dBm
tx bitrate: 54.0 MBit/s MCS 3 40MHz
rx bitrate: 1.0 MBit/s
rx duration: 0 us

This patch enable firmware's extened flag of stats by setting flag WMI_TLV_STAT_PEER_EXTD of ar->fw_stats_req_mask which is set in ath10k_core_init_firmware_features via WMI_REQUEST_STATS_CMDID.

After apply this patch, rx duration show value with the command:
Station c4:04:15:5d:97:22 (on wlan0)

        inactive time:  883 ms
        rx bytes:       44289
        rx packets:     265
        tx bytes:       10838
        tx packets:     93
        tx retries:     899
        tx failed:      103
        beacon loss:    0
        beacon rx:      78
        rx drop misc:   46
        signal:         -71 [-74, -76] dBm
        signal avg:     -70 [-74, -76] dBm

beacon signal avg: -70 dBm
tx bitrate: 54.0 MBit/s MCS 3 40MHz
rx bitrate: 1.0 MBit/s
rx duration: 358004 us

This patch do not have side effect for all chips, because function ath10k_debug_fw_stats_request is already exported to debugfs "fw_stats" and WMI_REQUEST_STATS_CMDID is safely sent after condition checked by ath10k_peer_stats_enabled in ath10k_sta_statistics.

Quoted 4 lines

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Patch applied to ath-next branch of ath.git, thanks.

4913e675630e ath10k: enable rx duration report default for wmi tlv

Signature · 8 lines
https://patchwork.kernel.org/patch/11504895/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k