target/arm: Restrict TCG cpus to TCG accel
v3 cover target/arm: Restrict TCG cpus to TCG accel
These are the uncontroversial patches from "Support disabling TCG on ARM (part 2)"
https://www.mail-archive.com/[email protected]/msg689168.html
The other patches are blocked by the "accel: Allow targets to use Kconfig" series:
https://www.mail-archive.com/[email protected]/msg689024.html
Patch #4 is new "Restrict v8M IDAU interface to Aarch32 CPUs".
Since v2:
- Fixed set_feature() clash trying to KISS
https://www.mail-archive.com/[email protected]/msg697523.html
- Fixed aarch64-linux-user build failure reported by Peter:
https://www.mail-archive.com/[email protected]/msg699319.html
Since v1:
- Dropped 'Make set_feature() available for other files' patch which fails to build with KVM only, see:
https://lists.gnu.org/archive/html/qemu-devel/2020-04/msg03843.html
Many thanks to Richard Henderson for his patience (again...)!
Regards,
Phil.
Philippe Mathieu-Daudé (4):
target/arm/kvm: Inline set_feature() calls target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs target/arm: Restrict TCG cpus to TCG accel
Thomas Huth (1):
target/arm: Make set_feature() available for other files
target/arm/cpu.h | 10 + target/arm/cpu.c | 662 +------------------------------------- target/arm/cpu64.c | 18 +- target/arm/cpu_tcg.c | 664 +++++++++++++++++++++++++++++++++++++++ target/arm/kvm32.c | 13 +- target/arm/kvm64.c | 22 +- target/arm/Makefile.objs | 1 + 7 files changed, 698 insertions(+), 692 deletions(-) create mode 100644 target/arm/cpu_tcg.c
Signature · 1 line
2.21.3
PATCH v3 1/5 target/arm/kvm: Inline set_feature() calls
We want to move the inlined declarations of set_feature() from cpu*.c to cpu.h. To avoid clashing with the KVM declarations, inline the few KVM calls.
--- target/arm/kvm32.c | 13 ++++--------- target/arm/kvm64.c | 22 ++++++---------------- 2 files changed, 10 insertions(+), 25 deletions(-)
target/arm/kvm32.c +4 -9
@@ -22,11 +22,6 @@#include "internals.h" #include "qemu/log.h" -static inline void set_feature (uint64_t *features,int feature) -{ - *features |=1ULL << feature; -} -static int read_sys_reg32 (int fd,uint32_t *pret,uint64_t id) {struct kvm_one_reg idreg = { .id = id, .addr = (uintptr_t )pret };
@@ -146,14 +141,14 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)* timers; this in turn implies most of the other feature * bits, but a few must be tested. */ -set_feature (&features,ARM_FEATURE_V7VE ); -set_feature (&features,ARM_FEATURE_GENERIC_TIMER ); + features |=1ULL <<ARM_FEATURE_V7VE ; + features |=1ULL <<ARM_FEATURE_GENERIC_TIMER ;if (extract32 (id_pfr0,12 ,4 ) ==1 ) { -set_feature (&features,ARM_FEATURE_THUMB2EE ); + features |=1ULL <<ARM_FEATURE_THUMB2EE ; }if (extract32 (ahcf->isar.mvfr1,12 ,4 ) ==1 ) { -set_feature (&features,ARM_FEATURE_NEON ); + features |=1ULL <<ARM_FEATURE_NEON ; } ahcf->features = features;
target/arm/kvm64.c +6 -16
@@ -447,16 +447,6 @@ void kvm_arm_pmu_set_irq(CPUState *cs, int irq) } } -static inline void set_feature (uint64_t *features,int feature) -{ - *features |=1ULL << feature; -} - -static inline void unset_feature (uint64_t *features,int feature) -{ - *features &= ~(1ULL << feature); -} -static int read_sys_reg32 (int fd,uint32_t *pret,uint64_t id) {uint64_t ret;
@@ -648,11 +638,11 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)* with VFPv4+Neon; this in turn implies most of the other * feature bits. */ -set_feature (&features,ARM_FEATURE_V8 ); -set_feature (&features,ARM_FEATURE_NEON ); -set_feature (&features,ARM_FEATURE_AARCH64 ); -set_feature (&features,ARM_FEATURE_PMU ); -set_feature (&features,ARM_FEATURE_GENERIC_TIMER ); + features |=1ULL <<ARM_FEATURE_V8 ; + features |=1ULL <<ARM_FEATURE_NEON ; + features |=1ULL <<ARM_FEATURE_AARCH64 ; + features |=1ULL <<ARM_FEATURE_PMU ; + features |=1ULL <<ARM_FEATURE_GENERIC_TIMER ; ahcf->features = features;
@@ -802,7 +792,7 @@ int kvm_arch_init_vcpu(CPUState *cs)if (cpu->has_pmu) { cpu->kvm_init_features[0 ] |=1 <<KVM_ARM_VCPU_PMU_V3 ; }else { -unset_feature (&env->features,ARM_FEATURE_PMU ); + env->features &= ~(1ULL <<ARM_FEATURE_PMU ); }if (cpu_isar_feature (aa64_sve, cpu)) {assert (kvm_arm_sve_supported (cs));
Signature · 1 line
2.21.3
PATCH v3 2/5 target/arm: Make set_feature() available for other files
In reply to Philippe Mathieu-DaudéFrom: Thomas Huth <[email protected]>
Move the common set_feature() and unset_feature() functions from cpu.c and cpu64.c to cpu.h.
Message-ID: <[email protected]>
--- target/arm/cpu.h | 10 ++++++++++ target/arm/cpu.c | 10 ---------- target/arm/cpu64.c | 10 ---------- 3 files changed, 10 insertions(+), 20 deletions(-)
target/arm/cpu.h +10 -0
@@ -696,6 +696,16 @@ typedef struct CPUARMState {void *gicv3state; } CPUARMState; +static inline void set_feature (CPUARMState *env,int feature) +{ + env->features |=1ULL << feature; +} + +static inline void unset_feature (CPUARMState *env,int feature) +{ + env->features &= ~(1ULL << feature); +} +/** * ARMELChangeHookFn: * type of a function which can be registered via arm_register_el_change_hook()
target/arm/cpu.c +0 -10
@@ -725,16 +725,6 @@ static bool arm_cpu_virtio_is_big_endian(CPUState *cs)#endif -static inline void set_feature (CPUARMState *env,int feature) -{ - env->features |=1ULL << feature; -} - -static inline void unset_feature (CPUARMState *env,int feature) -{ - env->features &= ~(1ULL << feature); -} -static int print_insn_thumb1 (bfd_vma pc,disassemble_info *info) {
target/arm/cpu64.c +0 -10
@@ -29,16 +29,6 @@#include "kvm_arm.h" #include "qapi/visitor.h" -static inline void set_feature (CPUARMState *env,int feature) -{ - env->features |=1ULL << feature; -} - -static inline void unset_feature (CPUARMState *env,int feature) -{ - env->features &= ~(1ULL << feature); -} -#ifndef CONFIG_USER_ONLY static uint64_t a57_a53_l2ctlr_read (CPUARMState *env,const ARMCPRegInfo *ri) {
Signature · 1 line
2.21.3
PATCH v3 3/5 target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
In reply to Philippe Mathieu-DaudéUse ARRAY_SIZE() to iterate over ARMCPUInfo[].
Since on the aarch64-linux-user build, arm_cpus[] is empty, add the cpu_count variable and only iterate when it is non-zero.
---
Without using cpu_count we get:
target/arm/cpu.c:2904:19: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
2904 | for (i = 0; i < ARRAY_SIZE(arm_cpus); ++i) {
| ^
cc1: all warnings being treated as errors
--- target/arm/cpu.c | 16 +++++++++------- target/arm/cpu64.c | 8 +++----- 2 files changed, 12 insertions(+), 12 deletions(-)
target/arm/cpu.c +9 -7
@@ -2739,7 +2739,6 @@ static const ARMCPUInfo arm_cpus[] = { { .name = "any", .initfn = arm_max_initfn }, #endif #endif - { .name = NULL } }; static Property arm_cpu_properties[] = {
@@ -2887,19 +2886,22 @@ static const TypeInfo idau_interface_type_info = {static void arm_cpu_register_types (void ) { -const ARMCPUInfo *info = arm_cpus; +const size_t cpu_count =ARRAY_SIZE (arm_cpus);type_register_static (&arm_cpu_type_info);type_register_static (&idau_interface_type_info); -while (info->name) { -arm_cpu_register (info); - info++; - } -#ifdef CONFIG_KVM type_register_static (&host_arm_cpu_type_info);#endif + +if (cpu_count) { +size_t i; + +for (i =0 ; i < cpu_count; ++i) { +arm_cpu_register (&arm_cpus[i]); + } + } }type_init (arm_cpu_register_types)
target/arm/cpu64.c +3 -5
@@ -734,7 +734,6 @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, - { .name = NULL } };static bool aarch64_cpu_get_aarch64 (Object *obj,Error **errp)
@@ -840,13 +839,12 @@ static const TypeInfo aarch64_cpu_type_info = {static void aarch64_cpu_register_types (void ) { -const ARMCPUInfo *info = aarch64_cpus; +size_t i;type_register_static (&aarch64_cpu_type_info); -while (info->name) { -aarch64_cpu_register (info); - info++; +for (i =0 ; i <ARRAY_SIZE (aarch64_cpus); ++i) { +aarch64_cpu_register (&aarch64_cpus[i]); } }
Signature · 1 line
2.21.3
Re: [PATCH v3 3/5] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
target/arm/cpu.c static const TypeInfo idau_interface_type_info = { · line 2904
Quoted 7 lines · Philippe Mathieu-Daudé
target/arm/cpu.c +7
-0+if (cpu_count) { +size_t i; + +for (i =0 ; i < cpu_count; ++i) { +arm_cpu_register (&arm_cpus[i]); + } + }
You can use int instead of size_t to avoid the i < 0 type warning.
r~
PATCH v3 4/5 target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs
In reply to Philippe Mathieu-DaudéAs IDAU is a v8M feature, restrict it to the Aarch32 CPUs.
--- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
target/arm/cpu.c +1 -1
@@ -2889,7 +2889,6 @@ static void arm_cpu_register_types(void)const size_t cpu_count =ARRAY_SIZE (arm_cpus);type_register_static (&arm_cpu_type_info); -type_register_static (&idau_interface_type_info);#ifdef CONFIG_KVM type_register_static (&host_arm_cpu_type_info);
@@ -2898,6 +2897,7 @@ static void arm_cpu_register_types(void)if (cpu_count) {size_t i; +type_register_static (&idau_interface_type_info);for (i =0 ; i < cpu_count; ++i) {arm_cpu_register (&arm_cpus[i]); }
Signature · 1 line
2.21.3
Re: [PATCH v3 4/5] target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs
Quoted 6 lines · Philippe Mathieu-Daudé
As IDAU is a v8M feature, restrict it to the Aarch32 CPUs.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/arm/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
target/arm/cpu.c static void arm_cpu_register_types(void) · line 2903
Quoted 8 lines
target/arm/cpu.c +1
-0@@ -2898,6 +2897,7 @@ static void arm_cpu_register_types(void)if (cpu_count) {size_t i; +type_register_static (&idau_interface_type_info);for (i =0 ; i < cpu_count; ++i) {arm_cpu_register (&arm_cpus[i]); }
Oh, I see. I guess you can disregard the suggestion vs the previous patch.
r~
PATCH v3 5/5 target/arm: Restrict TCG cpus to TCG accel
In reply to Philippe Mathieu-DaudéA KVM-only build won't be able to run TCG cpus.
--- target/arm/cpu.c | 634 ------------------------------------- target/arm/cpu_tcg.c | 664 +++++++++++++++++++++++++++++++++++++++ target/arm/Makefile.objs | 1 + 3 files changed, 665 insertions(+), 634 deletions(-) create mode 100644 target/arm/cpu_tcg.c
target/arm/cpu.c +0 -634
@@ -574,32 +574,6 @@ bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request)return true; } -#if !defined(CONFIG_USER_ONLY ) || !defined(TARGET_AARCH64 ) -static bool arm_v7m_cpu_exec_interrupt (CPUState *cs,int interrupt_request) -{ -CPUClass *cc =CPU_GET_CLASS (cs); -ARMCPU *cpu =ARM_CPU (cs); -CPUARMState *env = &cpu->env; -bool ret = false; - -/* -* ARMv7-M interrupt masking works differently than -A or -R. -* There is no FIQ/IRQ distinction. Instead of I and F bits -* masking FIQ and IRQ interrupts, an exception is taken only -* if it is higher priority than the current execution priority -* (which depends on state like BASEPRI, FAULTMASK and the -* currently active exception). -*/ -if (interrupt_request &CPU_INTERRUPT_HARD - && (armv7m_nvic_can_take_pending_exception (env->nvic))) { - cs->exception_index =EXCP_IRQ ; - cc->do_interrupt (cs); - ret = true; - } -return ret; -} -#endif -void arm_cpu_update_virq (ARMCPU *cpu) {/*
@@ -1820,406 +1794,6 @@ static ObjectClass *arm_cpu_class_by_name(const char *cpu_model)/* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY ) || !defined(TARGET_AARCH64 ) -static void arm926_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="arm,arm926" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_TEST_CLEAN ); - cpu->midr =0x41069265 ; - cpu->reset_fpsid =0x41011090 ; - cpu->ctr =0x1dd20d2 ; - cpu->reset_sctlr =0x00090078 ; - -/* -* ARMv5 does not have the ID_ISAR registers, but we can still -* set the field to indicate Jazelle support within QEMU. -*/ - cpu->isar.id_isar1 =FIELD_DP32 (cpu->isar.id_isar1,ID_ISAR1 ,JAZELLE ,1 ); -/* -* Similarly, we need to set MVFR0 fields to enable vfp and short vector -* support even though ARMv5 doesn't have this register. -*/ - cpu->isar.mvfr0 =FIELD_DP32 (cpu->isar.mvfr0,MVFR0 ,FPSHVEC ,1 ); - cpu->isar.mvfr0 =FIELD_DP32 (cpu->isar.mvfr0,MVFR0 ,FPSP ,1 ); - cpu->isar.mvfr0 =FIELD_DP32 (cpu->isar.mvfr0,MVFR0 ,FPDP ,1 ); -} - -static void arm946_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="arm,arm946" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_PMSA ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); - cpu->midr =0x41059461 ; - cpu->ctr =0x0f004006 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void arm1026_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="arm,arm1026" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_AUXCR ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_TEST_CLEAN ); - cpu->midr =0x4106a262 ; - cpu->reset_fpsid =0x410110a0 ; - cpu->ctr =0x1dd20d2 ; - cpu->reset_sctlr =0x00090078 ; - cpu->reset_auxcr =1 ; - -/* -* ARMv5 does not have the ID_ISAR registers, but we can still -* set the field to indicate Jazelle support within QEMU. -*/ - cpu->isar.id_isar1 =FIELD_DP32 (cpu->isar.id_isar1,ID_ISAR1 ,JAZELLE ,1 ); -/* -* Similarly, we need to set MVFR0 fields to enable vfp and short vector -* support even though ARMv5 doesn't have this register. -*/ - cpu->isar.mvfr0 =FIELD_DP32 (cpu->isar.mvfr0,MVFR0 ,FPSHVEC ,1 ); - cpu->isar.mvfr0 =FIELD_DP32 (cpu->isar.mvfr0,MVFR0 ,FPSP ,1 ); - cpu->isar.mvfr0 =FIELD_DP32 (cpu->isar.mvfr0,MVFR0 ,FPDP ,1 ); - - { -/* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */ -ARMCPRegInfo ifar = { - .name ="IFAR" , .cp =15 , .crn =6 , .crm =0 , .opc1 =0 , .opc2 =1 , - .access =PL1_RW , - .fieldoffset = offsetof(CPUARMState, cp15.ifar_ns), - .resetvalue =0 - }; -define_one_arm_cp_reg (cpu, &ifar); - } -} - -static void arm1136_r2_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); -/* -* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an -* older core than plain "arm1136". In particular this does not -* have the v6K features. -* These ID register values are correct for 1136 but may be wrong -* for 1136_r2 (in particular r0p2 does not actually implement most -* of the ID registers). -*/ - - cpu->dtb_compatible ="arm,arm1136" ; -set_feature (&cpu->env,ARM_FEATURE_V6 ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_DIRTY_REG ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_BLOCK_OPS ); - cpu->midr =0x4107b362 ; - cpu->reset_fpsid =0x410120b4 ; - cpu->isar.mvfr0 =0x11111111 ; - cpu->isar.mvfr1 =0x00000000 ; - cpu->ctr =0x1dd20d2 ; - cpu->reset_sctlr =0x00050078 ; - cpu->id_pfr0 =0x111 ; - cpu->id_pfr1 =0x1 ; - cpu->isar.id_dfr0 =0x2 ; - cpu->id_afr0 =0x3 ; - cpu->isar.id_mmfr0 =0x01130003 ; - cpu->isar.id_mmfr1 =0x10030302 ; - cpu->isar.id_mmfr2 =0x01222110 ; - cpu->isar.id_isar0 =0x00140011 ; - cpu->isar.id_isar1 =0x12002111 ; - cpu->isar.id_isar2 =0x11231111 ; - cpu->isar.id_isar3 =0x01102131 ; - cpu->isar.id_isar4 =0x141 ; - cpu->reset_auxcr =7 ; -} - -static void arm1136_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="arm,arm1136" ; -set_feature (&cpu->env,ARM_FEATURE_V6K ); -set_feature (&cpu->env,ARM_FEATURE_V6 ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_DIRTY_REG ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_BLOCK_OPS ); - cpu->midr =0x4117b363 ; - cpu->reset_fpsid =0x410120b4 ; - cpu->isar.mvfr0 =0x11111111 ; - cpu->isar.mvfr1 =0x00000000 ; - cpu->ctr =0x1dd20d2 ; - cpu->reset_sctlr =0x00050078 ; - cpu->id_pfr0 =0x111 ; - cpu->id_pfr1 =0x1 ; - cpu->isar.id_dfr0 =0x2 ; - cpu->id_afr0 =0x3 ; - cpu->isar.id_mmfr0 =0x01130003 ; - cpu->isar.id_mmfr1 =0x10030302 ; - cpu->isar.id_mmfr2 =0x01222110 ; - cpu->isar.id_isar0 =0x00140011 ; - cpu->isar.id_isar1 =0x12002111 ; - cpu->isar.id_isar2 =0x11231111 ; - cpu->isar.id_isar3 =0x01102131 ; - cpu->isar.id_isar4 =0x141 ; - cpu->reset_auxcr =7 ; -} - -static void arm1176_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="arm,arm1176" ; -set_feature (&cpu->env,ARM_FEATURE_V6K ); -set_feature (&cpu->env,ARM_FEATURE_VAPA ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_DIRTY_REG ); -set_feature (&cpu->env,ARM_FEATURE_CACHE_BLOCK_OPS ); -set_feature (&cpu->env,ARM_FEATURE_EL3 ); - cpu->midr =0x410fb767 ; - cpu->reset_fpsid =0x410120b5 ; - cpu->isar.mvfr0 =0x11111111 ; - cpu->isar.mvfr1 =0x00000000 ; - cpu->ctr =0x1dd20d2 ; - cpu->reset_sctlr =0x00050078 ; - cpu->id_pfr0 =0x111 ; - cpu->id_pfr1 =0x11 ; - cpu->isar.id_dfr0 =0x33 ; - cpu->id_afr0 =0 ; - cpu->isar.id_mmfr0 =0x01130003 ; - cpu->isar.id_mmfr1 =0x10030302 ; - cpu->isar.id_mmfr2 =0x01222100 ; - cpu->isar.id_isar0 =0x0140011 ; - cpu->isar.id_isar1 =0x12002111 ; - cpu->isar.id_isar2 =0x11231121 ; - cpu->isar.id_isar3 =0x01102131 ; - cpu->isar.id_isar4 =0x01141 ; - cpu->reset_auxcr =7 ; -} - -static void arm11mpcore_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="arm,arm11mpcore" ; -set_feature (&cpu->env,ARM_FEATURE_V6K ); -set_feature (&cpu->env,ARM_FEATURE_VAPA ); -set_feature (&cpu->env,ARM_FEATURE_MPIDR ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); - cpu->midr =0x410fb022 ; - cpu->reset_fpsid =0x410120b4 ; - cpu->isar.mvfr0 =0x11111111 ; - cpu->isar.mvfr1 =0x00000000 ; - cpu->ctr =0x1d192992 ;/* 32K icache 32K dcache */ - cpu->id_pfr0 =0x111 ; - cpu->id_pfr1 =0x1 ; - cpu->isar.id_dfr0 =0 ; - cpu->id_afr0 =0x2 ; - cpu->isar.id_mmfr0 =0x01100103 ; - cpu->isar.id_mmfr1 =0x10020302 ; - cpu->isar.id_mmfr2 =0x01222000 ; - cpu->isar.id_isar0 =0x00100011 ; - cpu->isar.id_isar1 =0x12002111 ; - cpu->isar.id_isar2 =0x11221011 ; - cpu->isar.id_isar3 =0x01102131 ; - cpu->isar.id_isar4 =0x141 ; - cpu->reset_auxcr =1 ; -} - -static void cortex_m0_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); -set_feature (&cpu->env,ARM_FEATURE_V6 ); -set_feature (&cpu->env,ARM_FEATURE_M ); - - cpu->midr =0x410cc200 ; -} - -static void cortex_m3_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); -set_feature (&cpu->env,ARM_FEATURE_V7 ); -set_feature (&cpu->env,ARM_FEATURE_M ); -set_feature (&cpu->env,ARM_FEATURE_M_MAIN ); - cpu->midr =0x410fc231 ; - cpu->pmsav7_dregion =8 ; - cpu->id_pfr0 =0x00000030 ; - cpu->id_pfr1 =0x00000200 ; - cpu->isar.id_dfr0 =0x00100000 ; - cpu->id_afr0 =0x00000000 ; - cpu->isar.id_mmfr0 =0x00000030 ; - cpu->isar.id_mmfr1 =0x00000000 ; - cpu->isar.id_mmfr2 =0x00000000 ; - cpu->isar.id_mmfr3 =0x00000000 ; - cpu->isar.id_isar0 =0x01141110 ; - cpu->isar.id_isar1 =0x02111000 ; - cpu->isar.id_isar2 =0x21112231 ; - cpu->isar.id_isar3 =0x01111110 ; - cpu->isar.id_isar4 =0x01310102 ; - cpu->isar.id_isar5 =0x00000000 ; - cpu->isar.id_isar6 =0x00000000 ; -} - -static void cortex_m4_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - -set_feature (&cpu->env,ARM_FEATURE_V7 ); -set_feature (&cpu->env,ARM_FEATURE_M ); -set_feature (&cpu->env,ARM_FEATURE_M_MAIN ); -set_feature (&cpu->env,ARM_FEATURE_THUMB_DSP ); - cpu->midr =0x410fc240 ;/* r0p0 */ - cpu->pmsav7_dregion =8 ; - cpu->isar.mvfr0 =0x10110021 ; - cpu->isar.mvfr1 =0x11000011 ; - cpu->isar.mvfr2 =0x00000000 ; - cpu->id_pfr0 =0x00000030 ; - cpu->id_pfr1 =0x00000200 ; - cpu->isar.id_dfr0 =0x00100000 ; - cpu->id_afr0 =0x00000000 ; - cpu->isar.id_mmfr0 =0x00000030 ; - cpu->isar.id_mmfr1 =0x00000000 ; - cpu->isar.id_mmfr2 =0x00000000 ; - cpu->isar.id_mmfr3 =0x00000000 ; - cpu->isar.id_isar0 =0x01141110 ; - cpu->isar.id_isar1 =0x02111000 ; - cpu->isar.id_isar2 =0x21112231 ; - cpu->isar.id_isar3 =0x01111110 ; - cpu->isar.id_isar4 =0x01310102 ; - cpu->isar.id_isar5 =0x00000000 ; - cpu->isar.id_isar6 =0x00000000 ; -} - -static void cortex_m7_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - -set_feature (&cpu->env,ARM_FEATURE_V7 ); -set_feature (&cpu->env,ARM_FEATURE_M ); -set_feature (&cpu->env,ARM_FEATURE_M_MAIN ); -set_feature (&cpu->env,ARM_FEATURE_THUMB_DSP ); - cpu->midr =0x411fc272 ;/* r1p2 */ - cpu->pmsav7_dregion =8 ; - cpu->isar.mvfr0 =0x10110221 ; - cpu->isar.mvfr1 =0x12000011 ; - cpu->isar.mvfr2 =0x00000040 ; - cpu->id_pfr0 =0x00000030 ; - cpu->id_pfr1 =0x00000200 ; - cpu->isar.id_dfr0 =0x00100000 ; - cpu->id_afr0 =0x00000000 ; - cpu->isar.id_mmfr0 =0x00100030 ; - cpu->isar.id_mmfr1 =0x00000000 ; - cpu->isar.id_mmfr2 =0x01000000 ; - cpu->isar.id_mmfr3 =0x00000000 ; - cpu->isar.id_isar0 =0x01101110 ; - cpu->isar.id_isar1 =0x02112000 ; - cpu->isar.id_isar2 =0x20232231 ; - cpu->isar.id_isar3 =0x01111131 ; - cpu->isar.id_isar4 =0x01310132 ; - cpu->isar.id_isar5 =0x00000000 ; - cpu->isar.id_isar6 =0x00000000 ; -} - -static void cortex_m33_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - -set_feature (&cpu->env,ARM_FEATURE_V8 ); -set_feature (&cpu->env,ARM_FEATURE_M ); -set_feature (&cpu->env,ARM_FEATURE_M_MAIN ); -set_feature (&cpu->env,ARM_FEATURE_M_SECURITY ); -set_feature (&cpu->env,ARM_FEATURE_THUMB_DSP ); - cpu->midr =0x410fd213 ;/* r0p3 */ - cpu->pmsav7_dregion =16 ; - cpu->sau_sregion =8 ; - cpu->isar.mvfr0 =0x10110021 ; - cpu->isar.mvfr1 =0x11000011 ; - cpu->isar.mvfr2 =0x00000040 ; - cpu->id_pfr0 =0x00000030 ; - cpu->id_pfr1 =0x00000210 ; - cpu->isar.id_dfr0 =0x00200000 ; - cpu->id_afr0 =0x00000000 ; - cpu->isar.id_mmfr0 =0x00101F40 ; - cpu->isar.id_mmfr1 =0x00000000 ; - cpu->isar.id_mmfr2 =0x01000000 ; - cpu->isar.id_mmfr3 =0x00000000 ; - cpu->isar.id_isar0 =0x01101110 ; - cpu->isar.id_isar1 =0x02212000 ; - cpu->isar.id_isar2 =0x20232232 ; - cpu->isar.id_isar3 =0x01111131 ; - cpu->isar.id_isar4 =0x01310132 ; - cpu->isar.id_isar5 =0x00000000 ; - cpu->isar.id_isar6 =0x00000000 ; - cpu->clidr =0x00000000 ; - cpu->ctr =0x8000c000 ; -} - -static void arm_v7m_class_init (ObjectClass *oc,void *data) -{ -ARMCPUClass *acc =ARM_CPU_CLASS (oc); -CPUClass *cc =CPU_CLASS (oc); - - acc->info = data; -#ifndef CONFIG_USER_ONLY - cc->do_interrupt = arm_v7m_cpu_do_interrupt; -#endif - - cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt; -} - -static const ARMCPRegInfo cortexr5_cp_reginfo[] = { -/* Dummy the TCM region regs for the moment */ - { .name ="ATCM" , .cp =15 , .opc1 =0 , .crn =9 , .crm =1 , .opc2 =0 , - .access =PL1_RW , .type =ARM_CP_CONST }, - { .name ="BTCM" , .cp =15 , .opc1 =0 , .crn =9 , .crm =1 , .opc2 =1 , - .access =PL1_RW , .type =ARM_CP_CONST }, - { .name ="DCACHE_INVAL" , .cp =15 , .opc1 =0 , .crn =15 , .crm =5 , - .opc2 =0 , .access =PL1_W , .type =ARM_CP_NOP }, -REGINFO_SENTINEL -}; - -static void cortex_r5_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - -set_feature (&cpu->env,ARM_FEATURE_V7 ); -set_feature (&cpu->env,ARM_FEATURE_V7MP ); -set_feature (&cpu->env,ARM_FEATURE_PMSA ); -set_feature (&cpu->env,ARM_FEATURE_PMU ); - cpu->midr =0x411fc153 ;/* r1p3 */ - cpu->id_pfr0 =0x0131 ; - cpu->id_pfr1 =0x001 ; - cpu->isar.id_dfr0 =0x010400 ; - cpu->id_afr0 =0x0 ; - cpu->isar.id_mmfr0 =0x0210030 ; - cpu->isar.id_mmfr1 =0x00000000 ; - cpu->isar.id_mmfr2 =0x01200000 ; - cpu->isar.id_mmfr3 =0x0211 ; - cpu->isar.id_isar0 =0x02101111 ; - cpu->isar.id_isar1 =0x13112111 ; - cpu->isar.id_isar2 =0x21232141 ; - cpu->isar.id_isar3 =0x01112131 ; - cpu->isar.id_isar4 =0x0010142 ; - cpu->isar.id_isar5 =0x0 ; - cpu->isar.id_isar6 =0x0 ; - cpu->mp_is_up = true; - cpu->pmsav7_dregion =16 ; -define_arm_cp_regs (cpu, cortexr5_cp_reginfo); -} - -static void cortex_r5f_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - -cortex_r5_initfn (obj); - cpu->isar.mvfr0 =0x10110221 ; - cpu->isar.mvfr1 =0x00000011 ; -} -static const ARMCPRegInfo cortexa8_cp_reginfo[] = { { .name ="L2LOCKDOWN" , .cp =15 , .crn =9 , .crm =0 , .opc1 =1 , .opc2 =0 , .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
@@ -2446,174 +2020,6 @@ static void cortex_a15_initfn(Object *obj)define_arm_cp_regs (cpu, cortexa15_cp_reginfo); } -static void ti925t_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); -set_feature (&cpu->env,ARM_FEATURE_V4T ); -set_feature (&cpu->env,ARM_FEATURE_OMAPCP ); - cpu->midr =ARM_CPUID_TI925T ; - cpu->ctr =0x5109149 ; - cpu->reset_sctlr =0x00000070 ; -} - -static void sa1100_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="intel,sa1100" ; -set_feature (&cpu->env,ARM_FEATURE_STRONGARM ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); - cpu->midr =0x4401A11B ; - cpu->reset_sctlr =0x00000070 ; -} - -static void sa1110_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); -set_feature (&cpu->env,ARM_FEATURE_STRONGARM ); -set_feature (&cpu->env,ARM_FEATURE_DUMMY_C15_REGS ); - cpu->midr =0x6901B119 ; - cpu->reset_sctlr =0x00000070 ; -} - -static void pxa250_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); - cpu->midr =0x69052100 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa255_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); - cpu->midr =0x69052d00 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa260_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); - cpu->midr =0x69052903 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa261_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); - cpu->midr =0x69052d05 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa262_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); - cpu->midr =0x69052d06 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa270a0_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); -set_feature (&cpu->env,ARM_FEATURE_IWMMXT ); - cpu->midr =0x69054110 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa270a1_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); -set_feature (&cpu->env,ARM_FEATURE_IWMMXT ); - cpu->midr =0x69054111 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa270b0_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); -set_feature (&cpu->env,ARM_FEATURE_IWMMXT ); - cpu->midr =0x69054112 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa270b1_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); -set_feature (&cpu->env,ARM_FEATURE_IWMMXT ); - cpu->midr =0x69054113 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa270c0_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); -set_feature (&cpu->env,ARM_FEATURE_IWMMXT ); - cpu->midr =0x69054114 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} - -static void pxa270c5_initfn (Object *obj) -{ -ARMCPU *cpu =ARM_CPU (obj); - - cpu->dtb_compatible ="marvell,xscale" ; -set_feature (&cpu->env,ARM_FEATURE_V5 ); -set_feature (&cpu->env,ARM_FEATURE_XSCALE ); -set_feature (&cpu->env,ARM_FEATURE_IWMMXT ); - cpu->midr =0x69054117 ; - cpu->ctr =0xd172172 ; - cpu->reset_sctlr =0x00000078 ; -} -#ifndef TARGET_AARCH64 /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports.
@@ -2688,50 +2094,10 @@ static void arm_max_initfn(Object *obj)static const ARMCPUInfo arm_cpus[] = { #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) - { .name ="arm926" , .initfn = arm926_initfn }, - { .name ="arm946" , .initfn = arm946_initfn }, - { .name ="arm1026" , .initfn = arm1026_initfn }, -/* -* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an -* older core than plain "arm1136". In particular this does not -* have the v6K features. -*/ - { .name ="arm1136-r2" , .initfn = arm1136_r2_initfn }, - { .name ="arm1136" , .initfn = arm1136_initfn }, - { .name ="arm1176" , .initfn = arm1176_initfn }, - { .name ="arm11mpcore" , .initfn = arm11mpcore_initfn }, - { .name ="cortex-m0" , .initfn = cortex_m0_initfn, - .class_init = arm_v7m_class_init }, - { .name ="cortex-m3" , .initfn = cortex_m3_initfn, - .class_init = arm_v7m_class_init }, - { .name ="cortex-m4" , .initfn = cortex_m4_initfn, - .class_init = arm_v7m_class_init }, - { .name ="cortex-m7" , .initfn = cortex_m7_initfn, - .class_init = arm_v7m_class_init }, - { .name ="cortex-m33" , .initfn = cortex_m33_initfn, - .class_init = arm_v7m_class_init }, - { .name ="cortex-r5" , .initfn = cortex_r5_initfn }, - { .name ="cortex-r5f" , .initfn = cortex_r5f_initfn }, { .name ="cortex-a7" , .initfn = cortex_a7_initfn }, { .name ="cortex-a8" , .initfn = cortex_a8_initfn }, { .name ="cortex-a9" , .initfn = cortex_a9_initfn }, { .name ="cortex-a15" , .initfn = cortex_a15_initfn }, - { .name ="ti925t" , .initfn = ti925t_initfn }, - { .name ="sa1100" , .initfn = sa1100_initfn }, - { .name ="sa1110" , .initfn = sa1110_initfn }, - { .name ="pxa250" , .initfn = pxa250_initfn }, - { .name ="pxa255" , .initfn = pxa255_initfn }, - { .name ="pxa260" , .initfn = pxa260_initfn }, - { .name ="pxa261" , .initfn = pxa261_initfn }, - { .name ="pxa262" , .initfn = pxa262_initfn }, -/* "pxa270" is an alias for "pxa270-a0" */ - { .name ="pxa270" , .initfn = pxa270a0_initfn }, - { .name ="pxa270-a0" , .initfn = pxa270a0_initfn }, - { .name ="pxa270-a1" , .initfn = pxa270a1_initfn }, - { .name ="pxa270-b0" , .initfn = pxa270b0_initfn }, - { .name ="pxa270-b1" , .initfn = pxa270b1_initfn }, - { .name ="pxa270-c0" , .initfn = pxa270c0_initfn }, - { .name ="pxa270-c5" , .initfn = pxa270c5_initfn }, #ifndef TARGET_AARCH64 { .name ="max" , .initfn = arm_max_initfn }, #endif
target/arm/cpu_tcg.c new file +664 -0
664 lines not on this page · raw message
target/arm/Makefile.objs +1 -0
@@ -79,6 +79,7 @@ obj-y += translate.o op_helper.o obj-y += crypto_helper.o obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o obj-y += m_helper.o +obj-y += cpu_tcg.o obj-$(CONFIG_SOFTMMU) += psci.o
Signature · 1 line
2.21.3
Peter Maydell
AppliedQuoted 17 lines · Philippe Mathieu-Daudé
These are the uncontroversial patches from "Support disabling TCG on ARM (part 2)"
https://www.mail-archive.com/[email protected]/msg689168.htmlThe other patches are blocked by the "accel: Allow targets to use
Kconfig" series:
https://www.mail-archive.com/[email protected]/msg689024.htmlPatch #4 is new "Restrict v8M IDAU interface to Aarch32 CPUs".
Since v2:
- Fixedset_feature()clash trying to KISS
https://www.mail-archive.com/[email protected]/msg697523.html
- Fixed aarch64-linux-user build failure reported by Peter:
https://www.mail-archive.com/[email protected]/msg699319.html
Quoted 6 lines
Since v1:
- Dropped 'Makeset_feature()available for other files' patch which fails to build with KVM only, see:
https://lists.gnu.org/archive/html/qemu-devel/2020-04/msg03843.htmlMany thanks to Richard Henderson for his patience (again...)!
Applied to target-arm.next, thanks.
-- PMM
Quoted 23 lines · Peter Maydell
Quoted 22 lines · Philippe Mathieu-Daudé
These are the uncontroversial patches from "Support disabling TCG on ARM (part 2)"
https://www.mail-archive.com/[email protected]/msg689168.htmlThe other patches are blocked by the "accel: Allow targets to use
Kconfig" series:
https://www.mail-archive.com/[email protected]/msg689024.htmlPatch #4 is new "Restrict v8M IDAU interface to Aarch32 CPUs".
Since v2:
- Fixedset_feature()clash trying to KISS
https://www.mail-archive.com/[email protected]/msg697523.html
- Fixed aarch64-linux-user build failure reported by Peter:https://www.mail-archive.com/[email protected]/msg699319.htmlSince v1:
- Dropped 'Makeset_feature()available for other files' patch which fails to build with KVM only, see:
https://lists.gnu.org/archive/html/qemu-devel/2020-04/msg03843.html
Quoted 5 lines
Quoted 1 line
Many thanks to Richard Henderson for his patience (again...)!
Applied to target-arm.next, thanks.
Thanks :)
Quoted 3 lines
-- PMM