armv8: ls1028a: move FSL_LAYERSCAPE to kconfig
PATCH v2 1/2 armv8: ls1028a: move FSL_LAYERSCAPE to kconfig
CONFIG_FSL_LAYERSCAPE is available in kconfig. There is no need to define it per board; the ls1028a_common.h is really board dependent and only fits to the NXP eval boards. Instead select CONFIG_FSL_LAYERSCAPE when ARCH_LS1028A is selected.
---
changes since v1:
none
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 + include/configs/ls1028a_common.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/armv8/fsl-layerscape/Kconfig +1 -0
@@ -23,6 +23,7 @@ config ARCH_LS1012A config ARCH_LS1028A bool select ARMV8_SET_SMPEN + select FSL_LAYERSCAPE select FSL_LSCH3 select NXP_LSCH3_2 select SYS_FSL_HAS_CCI400
include/configs/ls1028a_common.h +0 -1
@@ -7,7 +7,6 @@#define __L1028A_COMMON_H#define CONFIG_REMAKE_ELF -#define CONFIG_FSL_LAYERSCAPE #define CONFIG_MP #include <asm/arch/stream_id_lsch3.h>
Signature · 1 line
2.20.1
PATCH v2 2/2 board: kontron: add sl28 support
Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux.
Also only one board variant is supported for now. That is the Single PHY variant. Other variants will fall back to this one.
In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details.
---
changes since v1:
- fix watchdog device tree reference
Sorry for the noise!
arch/arm/Kconfig | 10 ++ arch/arm/dts/Makefile | 2 + .../arm/dts/fsl-ls1028a-kontron-sl28-var3.dts | 14 ++ arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 128 ++++++++++++++++++ board/kontron/sl28/Kconfig | 18 +++ board/kontron/sl28/MAINTAINERS | 6 + board/kontron/sl28/Makefile | 8 ++ board/kontron/sl28/README | 63 +++++++++ board/kontron/sl28/common.c | 10 ++ board/kontron/sl28/ddr.c | 98 ++++++++++++++ board/kontron/sl28/sl28.c | 90 ++++++++++++ board/kontron/sl28/spl.c | 9 ++ configs/kontron_sl28_defconfig | 102 ++++++++++++++ include/configs/kontron_sl28.h | 85 ++++++++++++ 14 files changed, 643 insertions(+) create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28.dts create mode 100644 board/kontron/sl28/Kconfig create mode 100644 board/kontron/sl28/MAINTAINERS create mode 100644 board/kontron/sl28/Makefile create mode 100644 board/kontron/sl28/README create mode 100644 board/kontron/sl28/common.c create mode 100644 board/kontron/sl28/ddr.c create mode 100644 board/kontron/sl28/sl28.c create mode 100644 board/kontron/sl28/spl.c create mode 100644 configs/kontron_sl28_defconfig create mode 100644 include/configs/kontron_sl28.h
arch/arm/Kconfig +10 -0
@@ -1563,6 +1563,15 @@ config TARGET_LS1046AFRWY development platform that supports the QorIQ LS1046A Layerscape Architecture processor. +config TARGET_SL28 + bool "Support sl28" + select ARCH_LS1028A + select ARM64 + select ARMV8_MULTIENTRY + select SUPPORT_SPL + help + Support for Kontron SMARC-sAL28 board. + config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA
@@ -1893,6 +1902,7 @@ source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" +source "board/kontron/sl28/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig"
arch/arm/dts/Makefile +2 -0
@@ -379,6 +379,8 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2088a-rdb-qspi.dtb \ fsl-ls1088a-rdb.dtb \ fsl-ls1088a-qds.dtb \ + fsl-ls1028a-kontron-sl28.dtb \ + fsl-ls1028a-kontron-sl28-var3.dtb \ fsl-ls1028a-rdb.dtb \ fsl-ls1028a-qds-duart.dtb \ fsl-ls1028a-qds-lpuart.dtb \
arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Kontron SMARC-sAL28 device tree source (Single PHY version) + */ + +/dts-v1/; + +#include "fsl-ls1028a-kontron-sl28.dts" + +/ { + u-boot,dm-pre-reloc; + model = "Kontron SMARC-sAL28 Board (Single PHY)"; + compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a"; +};
arch/arm/dts/fsl-ls1028a-kontron-sl28.dts new file +128 -0
128 lines not on this page · raw message
board/kontron/sl28/Kconfig new file +18 -0
@@ -0,0 +1,18 @@ +if TARGET_SL28 + +config SYS_BOARD + default "sl28" + +config SYS_VENDOR + default "kontron" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "kontron_sl28" + +config SYS_TEXT_BASE + default 0x96000000 + +endif
board/kontron/sl28/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +Kontron SMARC-sAL28 board +M: Michael Walle <[email protected]> +S: Maintained +F: board/kontron/sl28/ +F: include/configs/kontron_sl28.h +F: configs/kontron_sl28_defconfig
board/kontron/sl28/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ + +ifndef CONFIG_SPL_BUILD +obj-y += sl28.o +endif + +obj-y += common.o ddr.o +obj-$(CONFIG_SPL_BUILD) += spl.o
board/kontron/sl28/README new file +63 -0
63 lines not on this page · raw message
board/kontron/sl28/common.c new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/arch-fsl-layerscape/soc.h> + +int board_early_init_f (void ) +{ +fsl_lsch3_early_init_f (); +return 0 ; +}
board/kontron/sl28/ddr.c new file +98 -0
98 lines not on this page · raw message
board/kontron/sl28/sl28.c new file +90 -0
90 lines not on this page · raw message
board/kontron/sl28/spl.c new file +9 -0
@@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/spl.h> + +void board_boot_order (u32 *spl_boot_list) +{ + spl_boot_list[0 ] =BOOT_DEVICE_SPI ; +}
configs/kontron_sl28_defconfig new file +102 -0
102 lines not on this page · raw message
include/configs/kontron_sl28.h new file +85 -0
85 lines not on this page · raw message
Signature · 1 line
2.20.1