Skip to contentSkip to conversation

imx8mm_evk: Select the watchdog driver

PATCH New Fabio Estevam 4 participants 12 messages May 11, 2020 – Jun 8, 2020 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/5 imx8mm_evk: Select the watchdog driver

Currently the watchdog driver is not selected, which causes the following warnings in both SPL and U-Boot proper:

U-Boot SPL 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300) Normal Boot
WDT: Started without servicing (60s timeout)
Trying to boot from MMC1

U-Boot 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300)

CPU:   Freescale i.MX8MMQ rev1.0 at 1200 MHz
Reset cause: POR
Model: FSL i.MX8MM EVK board
DRAM:  2 GiB
WDT:   Started without servicing (60s timeout)

....

System reboots after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

---
 configs/imx8mm_evk_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/imx8mm_evk_defconfig +0 -1
index 9a72f46f27..e7abf6b07c 100644
@@ -85,5 +85,4 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
author reviewer
#1 lore raw

PATCH 2/5 imx8mn_ddr4_evk: Select the watchdog driver

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

---
 configs/imx8mn_ddr4_evk_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/imx8mn_ddr4_evk_defconfig +0 -1
index bc6014d73a..7fd443f37e 100644
@@ -79,5 +79,4 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/5 imx8mn_ddr4_evk: Select the watchdog driver

Quoted 5 lines

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#3 lore raw

PATCH 3/5 imx8mm_beacon: Select the watchdog driver

In reply to Fabio Estevam

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

---
 configs/imx8mm_beacon_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/imx8mm_beacon_defconfig +0 -1
index b935d72360..a518963f48 100644
@@ -100,5 +100,4 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
#4 lore raw

PATCH 3/5 imx8mm_beacon: Select the watchdog driver

Quoted 7 lines · Fabio Estevam

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

Thanks for doing that!

Quoted 18 lines
---
 configs/imx8mm_beacon_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/imx8mm_beacon_defconfig +0 -2
index b935d72360..a518963f48 100644
@@ -100,5 +100,4 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
--

2.17.1

#5 lore raw

PATCH 3/5 imx8mm_beacon: Select the watchdog driver

In reply to Fabio Estevam
Quoted 6 lines

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#6 lore raw

PATCH 4/5 imx8mp_evk: Select the watchdog driver

In reply to Fabio Estevam

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

---
 configs/imx8mp_evk_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/imx8mp_evk_defconfig +0 -1
index 44b2935f69..0693658365 100644
@@ -82,5 +82,4 @@ CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
#7 lore raw

PATCH 4/5 imx8mp_evk: Select the watchdog driver

Quoted 5 lines

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#8 lore raw

PATCH 5/5 verdin-imx8mm: Select the watchdog driver

In reply to Fabio Estevam

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

---
 configs/verdin-imx8mm_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/verdin-imx8mm_defconfig +0 -1
index c68b299a95..f5b6e03251 100644
@@ -99,5 +99,4 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
#9 lore raw

PATCH 5/5 verdin-imx8mm: Select the watchdog driver

Hi Fabio,

Quoted 23 lines · On Mon, May 11, 2020, 17:02 Fabio Estevam <[email protected]> wrote:

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.

Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

---
 configs/verdin-imx8mm_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/verdin-imx8mm_defconfig +0 -2
index c68b299a95..f5b6e03251 100644
@@ -99,5 +99,4 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
-# CONFIG_WATCHDOG is not set
 CONFIG_IMX_WATCHDOG=y
--
Quoted 2 lines

2.17.1

Thanks!

Quoted 1 line
#10 lore raw

PATCH 5/5 verdin-imx8mm: Select the watchdog driver

In reply to Fabio Estevam
Quoted 6 lines

Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#11 lore raw

PATCH 1/5 imx8mm_evk: Select the watchdog driver

In reply to Fabio Estevam
Quoted 12 lines

Currently the watchdog driver is not selected, which causes the following warnings in both SPL and U-Boot proper:
U-Boot SPL 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300) Normal Boot
WDT: Started without servicing (60s timeout)
Trying to boot from MMC1
U-Boot 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300)

CPU:   Freescale i.MX8MMQ rev1.0 at 1200 MHz
Reset cause: POR
Model: FSL i.MX8MM EVK board
DRAM:  2 GiB
WDT:   Started without servicing (60s timeout)
Quoted 6 lines

....
System reboots after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================