imx8mm_evk: Select the watchdog driver
Fabio Estevam
reviewerPATCH 1/5 imx8mm_evk: Select the watchdog driver
Currently the watchdog driver is not selected, which causes the following warnings in both SPL and U-Boot proper:
U-Boot SPL 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300) Normal Boot
WDT: Started without servicing (60s timeout)
Trying to boot from MMC1
U-Boot 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300)
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: FSL i.MX8MM EVK board DRAM: 2 GiB WDT: Started without servicing (60s timeout)
....
System reboots after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.
--- configs/imx8mm_evk_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/imx8mm_evk_defconfig +0 -1
@@ -85,5 +85,4 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH 2/5 imx8mn_ddr4_evk: Select the watchdog driver
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.
--- configs/imx8mn_ddr4_evk_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/imx8mn_ddr4_evk_defconfig +0 -1
@@ -79,5 +79,4 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH 3/5 imx8mm_beacon: Select the watchdog driver
In reply to Fabio EstevamCurrently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.
--- configs/imx8mm_beacon_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/imx8mm_beacon_defconfig +0 -1
@@ -100,5 +100,4 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH 4/5 imx8mp_evk: Select the watchdog driver
In reply to Fabio EstevamCurrently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.
--- configs/imx8mp_evk_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/imx8mp_evk_defconfig +0 -1
@@ -82,5 +82,4 @@ CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH 5/5 verdin-imx8mm: Select the watchdog driver
In reply to Fabio EstevamCurrently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced.
--- configs/verdin-imx8mm_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/verdin-imx8mm_defconfig +0 -1
@@ -99,5 +99,4 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.17.1
PATCH 3/5 imx8mm_beacon: Select the watchdog driver
In reply to Fabio EstevamQuoted 7 lines · Fabio Estevam
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling
CONFIG_WATCHDOGso that watchdog can be properly serviced.
Thanks for doing that!
Quoted 18 lines
Signed-off-by Fabio Estevam <[email protected]>--- configs/imx8mm_beacon_defconfig | 1 - 1 file changed, 1 deletion(-)configs/imx8mm_beacon_defconfig +0
-2@@ -100,5 +100,4 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y --2.17.1
PATCH 5/5 verdin-imx8mm: Select the watchdog driver
In reply to Fabio EstevamHi Fabio,
Quoted 23 lines · On Mon, May 11, 2020, 17:02 Fabio Estevam <[email protected]> wrote:
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enabling
CONFIG_WATCHDOGso that watchdog can be properly serviced.Signed-off-by Fabio Estevam <[email protected]>--- configs/verdin-imx8mm_defconfig | 1 - 1 file changed, 1 deletion(-)configs/verdin-imx8mm_defconfig +0
-2@@ -99,5 +99,4 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y -# CONFIG_WATCHDOG is not set CONFIG_IMX_WATCHDOG=y --
Quoted 2 lines
2.17.1
Thanks!
Quoted 1 line
PATCH 5/5 verdin-imx8mm: Select the watchdog driver
In reply to Fabio EstevamQuoted 6 lines
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enablingCONFIG_WATCHDOGso that watchdog can be properly serviced.Signed-off-by Fabio Estevam <[email protected]>Acked-by Igor Opaniuk <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 4/5 imx8mp_evk: Select the watchdog driver
In reply to Fabio EstevamQuoted 5 lines
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enablingCONFIG_WATCHDOGso that watchdog can be properly serviced.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 2/5 imx8mn_ddr4_evk: Select the watchdog driver
In reply to Fabio EstevamQuoted 5 lines
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enablingCONFIG_WATCHDOGso that watchdog can be properly serviced.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 3/5 imx8mm_beacon: Select the watchdog driver
In reply to Fabio EstevamQuoted 6 lines
Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt.
Fix this problem by enablingCONFIG_WATCHDOGso that watchdog can be properly serviced.Signed-off-by Fabio Estevam <[email protected]>Reviewed-by Adam Ford <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/5 imx8mm_evk: Select the watchdog driver
In reply to Fabio EstevamQuoted 12 lines
Currently the watchdog driver is not selected, which causes the following warnings in both SPL and U-Boot proper:
U-Boot SPL 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300) Normal Boot
WDT: Started without servicing (60s timeout)
Trying to boot from MMC1
U-Boot 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300)CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: FSL i.MX8MM EVK board DRAM: 2 GiB WDT: Started without servicing (60s timeout)
Quoted 6 lines
....
System reboots after staying 60s in the U-Boot prompt. Fix this problem by enablingCONFIG_WATCHDOGso that watchdog can be properly serviced.Suggested-by Marek Vasut <[email protected]>Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================