usb: xhci: Add support for Renesas USB controllers
Subsystems (6)
v13 cover usb: xhci: Add support for Renesas USB controllers
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
Changes in v13:
- Make rensesas as independent module invoke by xhci-pci which can be selected by users of such hardware
Changes in v12:
- Restore back module name for xhci-pci, so now renesas is a separate module, export init/exit routines from renesas modules
- Update changelog on patch2
Changes in v11:
- update xhci->quirks and use that in remove function
- remove error return renesas_verify_fw_version()
- remove renesas_download_rom() and modify renesas_fw_download_image() for reuse
Changes in v10:
remove renesas_xhci_pci_probe and call renesas_xhci_check_request_fw and also cleanup exit code along with it.
Changes in v9:
Make fw load a sync call and have single instance of probe execute,
elimating probe/remove races
Add quirk for renesas and use that for loading
Changes in v8:
Fix compile error reported by Kbuild-bot by making usb_hcd_pci_probe() take const struct hc_driver * as argument
Changes in v7:
Make a single module which removes issues with module loading Keep the renesas code in renesas file
Add hc_driver as argument for usb_hcd_pci_probe and modify hdc drivers to
pass this and not use driver_data
Use driver data for fw name
Remove code to check if we need to load firmware or not remove multiple fw version support, we can do that with symlink in
userspace
Changes in v6:
Move the renesas code into a separate driver which invokes xhci-pci functions.
Changes in v5:
Added a debugfs rom erase patch, helps in debugging Squashed patch 1 & 2 as requested by Mathias
Changes in v4:
Rollback the delay values as we got device failures
Changes in v3:
Dropped patch 2 as discussed with Christian
Removed aligned 8 bytes check
Change order for firmware search from highest version to lowest Added entry for new firmware for device 0x14 as well Add tested by Christian
Changes in v2:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recurion for renesas_fw_download
added MODULE_FIRMWARE
added comment for multip
Christian Lamparter (1):
usb: renesas-xhci: Add the renesas xhci driver
Vinod Koul (4):
usb: hci: add hc_driver as argument for usb_hcd_pci_probe
usb: xhci: Add support for Renesas controller with memory
usb: renesas-xhci: Add ROM loader for uPD720201
usb: xhci: provide a debugfs hook for erasing rom
drivers/usb/core/hcd-pci.c | 7 +- drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-pci.c | 6 +- drivers/usb/host/ohci-pci.c | 9 +- drivers/usb/host/uhci-pci.c | 8 +- drivers/usb/host/xhci-pci-renesas.c | 678 ++++++++++++++++++++++++++++ drivers/usb/host/xhci-pci.c | 47 +- drivers/usb/host/xhci-pci.h | 28 ++ drivers/usb/host/xhci.h | 1 + include/linux/usb/hcd.h | 3 +- 11 files changed, 775 insertions(+), 22 deletions(-) create mode 100644 drivers/usb/host/xhci-pci-renesas.c create mode 100644 drivers/usb/host/xhci-pci.h
Signature · 1 line
2.25.4
PATCH v13 1/5 usb: hci: add hc_driver as argument for usb_hcd_pci_probe
usb_hcd_pci_probe expects users to call this with driver_data set as hc_driver, that limits the possibility of using the driver_data for driver data.
Add hc_driver as argument to usb_hcd_pci_probe and modify the callers ehci/ohci/xhci/uhci to pass hc_driver as argument and freeup the driver_data used
Tested xhci driver on Dragon-board RB3, compile tested ehci, ohci and uhci.
--- drivers/usb/core/hcd-pci.c | 7 ++++--- drivers/usb/host/ehci-pci.c | 6 ++---- drivers/usb/host/ohci-pci.c | 9 ++++++--- drivers/usb/host/uhci-pci.c | 8 ++++++-- drivers/usb/host/xhci-pci.c | 14 +++++--------- include/linux/usb/hcd.h | 3 ++- 6 files changed, 25 insertions(+), 22 deletions(-)
drivers/usb/core/hcd-pci.c +4 -3
@@ -159,6 +159,7 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,* usb_hcd_pci_probe - initialize PCI-based HCDs * @dev: USB Host Controller being probed * @id: pci hotplug id connecting controller to HCD framework +* @driver: USB HC driver handle * Context: !in_interrupt() * * Allocates basic PCI resources for this USB host controller, and
@@ -169,9 +170,9 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,* * Return: 0 if successful. */ -int usb_hcd_pci_probe (struct pci_dev *dev,const struct pci_device_id *id) +int usb_hcd_pci_probe (struct pci_dev *dev,const struct pci_device_id *id, +const struct hc_driver *driver) { -struct hc_driver *driver;struct usb_hcd *hcd;int retval;int hcd_irq =0 ;
@@ -181,7 +182,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)if (!id)return -EINVAL ; - driver = (struct hc_driver *)id->driver_data; +if (!driver)return -EINVAL ;
drivers/usb/host/ehci-pci.c +2 -4
@@ -360,23 +360,21 @@ static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) {if (is_bypassed_id (pdev))return -ENODEV ; -return usb_hcd_pci_probe (pdev, id); +return usb_hcd_pci_probe (pdev, id, &ehci_pci_hc_driver); }static void ehci_pci_remove (struct pci_dev *pdev) {pci_clear_mwi (pdev); -usb_hcd_pci_remove (pdev); +usb_hcd_pci_remove (pdev); }/* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids [] = { {/* handle any USB 2.0 EHCI controller */ PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_EHCI , ~0 ), - .driver_data = (unsigned long ) &ehci_pci_hc_driver, }, {PCI_VDEVICE (STMICRO ,PCI_DEVICE_ID_STMICRO_USB_HOST ), - .driver_data = (unsigned long ) &ehci_pci_hc_driver, }, {/* end: all zeroes */ } };
drivers/usb/host/ohci-pci.c +6 -3
@@ -277,21 +277,24 @@ static const struct ohci_driver_overrides pci_overrides __initconst = {static const struct pci_device_id pci_ids[] = { {/* handle any USB OHCI controller */ PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_OHCI , ~0 ), - .driver_data = (unsigned long ) &ohci_pci_hc_driver, }, {/* The device in the ConneXT I/O hub has no class reg */ PCI_VDEVICE (STMICRO ,PCI_DEVICE_ID_STMICRO_USB_OHCI ), - .driver_data = (unsigned long ) &ohci_pci_hc_driver, }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, pci_ids); +static int ohci_pci_probe (struct pci_dev *dev,const struct pci_device_id *id) +{ +return usb_hcd_pci_probe (dev, id, &ohci_pci_hc_driver); +} +/* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver ohci_pci_driver = { .name = hcd_name, .id_table = pci_ids, - .probe = usb_hcd_pci_probe, + .probe = ohci_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = usb_hcd_pci_shutdown,
drivers/usb/host/uhci-pci.c +6 -2
@@ -287,17 +287,21 @@ static const struct hc_driver uhci_driver = {static const struct pci_device_id uhci_pci_ids[] = { {/* handle any USB UHCI controller */ PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_UHCI , ~0 ), - .driver_data = (unsigned long ) &uhci_driver, }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, uhci_pci_ids); +static int uhci_pci_probe (struct pci_dev *dev,const struct pci_device_id *id) +{ +return usb_hcd_pci_probe (dev, id, &uhci_driver); +} +static struct pci_driver uhci_pci_driver = { .name = hcd_name, .id_table = uhci_pci_ids, - .probe = usb_hcd_pci_probe, + .probe = uhci_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = uhci_shutdown,
drivers/usb/host/xhci-pci.c +5 -9
@@ -327,11 +327,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) {int retval;struct xhci_hcd *xhci; -struct hc_driver *driver;struct usb_hcd *hcd; - driver = (struct hc_driver *)id->driver_data; -/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);
@@ -341,7 +338,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)* to say USB 2.0, but I'm not sure what the implications would be in * the other parts of the HCD code. */ - retval =usb_hcd_pci_probe (dev, id); + retval =usb_hcd_pci_probe (dev, id, &xhci_pci_hc_driver);if (retval) goto put_runtime_pm;
@@ -349,8 +346,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)/* USB 2.0 roothub is stored in the PCI device now. */ hcd =dev_get_drvdata (&dev->dev); xhci =hcd_to_xhci (hcd); - xhci->shared_hcd =usb_create_shared_hcd (driver, &dev->dev, -pci_name (dev), hcd); + xhci->shared_hcd =usb_create_shared_hcd (&xhci_pci_hc_driver, &dev->dev, +pci_name (dev), hcd);if (!xhci->shared_hcd) { retval = -ENOMEM ; goto dealloc_usb2_hcd;
@@ -544,10 +541,9 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)/*-------------------------------------------------------------------------*/ /* PCI driver selection metadata; PCI hotplugging uses this */ -static const struct pci_device_id pci_ids[] = { { +static const struct pci_device_id pci_ids[] = {/* handle any USB 3.0 xHCI controller */ -PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), - .driver_data = (unsigned long ) &xhci_pci_hc_driver, + {PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), }, {/* end: all zeroes */ } };
include/linux/usb/hcd.h +2 -1
@@ -479,7 +479,8 @@ extern void usb_hcd_platform_shutdown(struct platform_device *dev);struct pci_dev ;struct pci_device_id ;extern int usb_hcd_pci_probe (struct pci_dev *dev, -const struct pci_device_id *id); +const struct pci_device_id *id, +const struct hc_driver *driver);extern void usb_hcd_pci_remove (struct pci_dev *dev);extern void usb_hcd_pci_shutdown (struct pci_dev *dev);
Signature · 1 line
2.25.4
PATCH v13 2/5 usb: renesas-xhci: Add the renesas xhci driver
In reply to Vinod KoulFrom: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
[vkoul: fixed comments:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recursion for renesas_fw_download
add register defines and field names
move to a separate file
make fw loader as sync probe so that we execute in probe and prevent race
make xhci-pci-renesas a seprate module]
--- drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-pci-renesas.c | 365 ++++++++++++++++++++++++++++ drivers/usb/host/xhci-pci.h | 28 +++ 4 files changed, 403 insertions(+) create mode 100644 drivers/usb/host/xhci-pci-renesas.c create mode 100644 drivers/usb/host/xhci-pci.h
drivers/usb/host/Kconfig +9 -0
@@ -42,6 +42,15 @@ config USB_XHCI_PCI depends on USB_PCI default y +config USB_XHCI_PCI_RENESAS + tristate "Support for additional Renesas xHCI controller with firwmare" + depends on USB_XHCI_PCI + ---help--- + Say 'Y' to enable the support for the Renesas xHCI controller with + firwmare. Make sure you have the firwmare for the device and + installed on your system for this device to work. + If unsure, say 'N'. + config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" select USB_XHCI_RCAR if ARCH_RENESAS
drivers/usb/host/Makefile +1 -0
@@ -71,6 +71,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o +obj-$(CONFIG_USB_XHCI_PCI_RENESAS) += xhci-pci-renesas.o obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
drivers/usb/host/xhci-pci-renesas.c new file +365 -0
365 lines not on this page · raw message
drivers/usb/host/xhci-pci.h new file +28 -0
@@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2019-2020 Linaro Limited */ + +#ifndef XHCI_PCI_H +#define XHCI_PCI_H + +#if IS_ENABLED (CONFIG_USB_XHCI_PCI_RENESAS ) +int renesas_xhci_check_request_fw (struct pci_dev *dev, +const struct pci_device_id *id); +void renesas_xhci_pci_exit (struct pci_dev *dev); + +#else +int renesas_xhci_check_request_fw (struct pci_dev *dev, +const struct pci_device_id *id) +{ +return 0 ; +} + +void renesas_xhci_pci_exit (struct pci_dev *dev) { }; + +#endif + +struct xhci_driver_data { +u64 quirks; +const char *firmware; +}; + +#endif
Signature · 1 line
2.25.4
Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
Hi guys,
Quoted 20 lines · Vinod Koul
From: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
Quoted 5 lines
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
You wouldn't happen to have access to the documentation of the "original" uPD720200 USB 3.0 controller?
It would be cool if we could support that too with this driver.
thanks,
Signature · 1 line
heikki
Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
Hi Heikki
Quoted 29 lines · Heikki Krogerus
Hi guys,
Quoted 20 lines · Vinod Koul
From: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
Quoted 5 lines
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
Quoted 4 lines
You wouldn't happen to have access to the documentation of the "original" uPD720200 USB 3.0 controller?
It would be cool if we could support that too with this driver.
Not me. does it also require firmware? If so you can try with this driver and see if it works for you?
Thanks
Signature · 1 line
~Vinod
Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
Quoted 32 lines · Vinod Koul
Hi Heikki
Quoted 29 lines · Heikki Krogerus
Hi guys,
Quoted 25 lines · Vinod Koul
From: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
Quoted 7 lines
Quoted 4 lines
You wouldn't happen to have access to the documentation of the "original" uPD720200 USB 3.0 controller?
It would be cool if we could support that too with this driver.
Not me. does it also require firmware? If so you can try with this driver and see if it works for you?
It does require firmware, and yes I can test this driver at some point.
thanks,
Signature · 1 line
heikki
Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
In reply to Heikki KrogerusHello,
Quoted 27 lines · Heikki Krogerus
Quoted 20 lines · Vinod Koul
From: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
Quoted 5 lines
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
Quoted 4 lines
You wouldn't happen to have access to the documentation of the "original" uPD720200 USB 3.0 controller?
It would be cool if we could support that too with this driver.
???. I have one of those "original" uPD720200(A) working "just fine" in my Laptop currently.
It's an really old HP dv6-6003eg from around 2011 that came with two USB 3.0 Ports, which
are driven by a "NEC Corporation uPD720200 USB 3.0 Host Controller" 1033:0194 (Rev 04).
As for supporting the uPD720200 (flasher) with this serises.... There are some bad news:
"In addition, the programming interface for the uPD720200 and uPD720200A is different from the uPD720202, needs different programming tools, and relies on proprietary chip features that cannot be disclosed outside of Renesas."
<https://mail.coreboot.org/pipermail/flashrom/2013-February/010498.html> :-(
Regards,
Christian
Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
Quoted 43 lines · Christian Lamparter
Hello,
Quoted 27 lines · Heikki Krogerus
Quoted 20 lines · Vinod Koul
From: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
Quoted 5 lines
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.Quoted 4 lines
You wouldn't happen to have access to the documentation of the "original" uPD720200 USB 3.0 controller?
It would be cool if we could support that too with this driver.
???. I have one of those "original" uPD720200(A) working "just fine" in my Laptop currently.
It's an really old HP dv6-6003eg from around 2011 that came with two USB 3.0 Ports, which
are driven by a "NEC Corporation uPD720200 USB 3.0 Host Controller" 1033:0194 (Rev 04).
Quoted 7 lines
As for supporting the uPD720200 (flasher) with this serises.... There are some bad news:
"In addition, the programming interface for the uPD720200 and uPD720200A is different from the uPD720202, needs different programming tools, and relies on proprietary chip features that cannot be disclosed outside of Renesas."
<https://mail.coreboot.org/pipermail/flashrom/2013-February/010498.html> :-(
Too bad. That's what I was hoping to do with this driver. There are still boards out there equipped with uPD720200/uPD720200A that have older firmware. If you don't have the latest firmware (which is also from 2012), then PME and a few other things will not work (so resume from D3 does not work for example).
thanks,
Signature · 1 line
heikki
PATCH v13 3/5 usb: xhci: Add support for Renesas controller with memory
In reply to Vinod KoulSome rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
--- drivers/usb/host/xhci-pci.c | 35 ++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 1 + 2 files changed, 35 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-pci.c +34 -1
@@ -15,6 +15,7 @@#include "xhci.h" #include "xhci-trace.h" +#include "xhci-pci.h" #define SSIC_PORT_NUM 2#define SSIC_PORT_CFG2 0x880c
@@ -87,7 +88,16 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)static void xhci_pci_quirks (struct device *dev,struct xhci_hcd *xhci) { -struct pci_dev *pdev =to_pci_dev (dev); +struct pci_dev *pdev =to_pci_dev (dev); +struct xhci_driver_data *driver_data; +const struct pci_device_id *id; + + id =pci_match_id (pdev->driver->id_table, pdev); + +if (id && id->driver_data) { + driver_data = (struct xhci_driver_data *)id->driver_data; + xhci->quirks |= driver_data->quirks; + }/* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
@@ -328,6 +338,14 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)int retval;struct xhci_hcd *xhci;struct usb_hcd *hcd; +struct xhci_driver_data *driver_data; + + driver_data = (struct xhci_driver_data *)id->driver_data; +if (driver_data && driver_data->quirks &XHCI_RENESAS_FW_QUIRK ) { + retval =renesas_xhci_check_request_fw (dev, id); +if (retval) +return retval; + }/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);
@@ -389,6 +407,9 @@ static void xhci_pci_remove(struct pci_dev *dev)struct xhci_hcd *xhci; xhci =hcd_to_xhci (pci_get_drvdata (dev)); +if (xhci->quirks &XHCI_RENESAS_FW_QUIRK ) +renesas_xhci_pci_exit (dev); + xhci->xhc_state |=XHCI_STATE_REMOVING ;if (xhci->quirks &XHCI_DEFAULT_PM_RUNTIME_ALLOW )
@@ -540,14 +561,26 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)/*-------------------------------------------------------------------------*/ +static const struct xhci_driver_data reneses_data = { + .quirks =XHCI_RENESAS_FW_QUIRK , + .firmware ="renesas_usb_fw.mem" , +}; +/* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids[] = { + {PCI_DEVICE (0x1912 ,0x0014 ), + .driver_data = (unsigned long )&reneses_data, + }, + {PCI_DEVICE (0x1912 ,0x0015 ), + .driver_data = (unsigned long )&reneses_data, + },/* handle any USB 3.0 xHCI controller */ {PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, pci_ids); +MODULE_FIRMWARE ("renesas_usb_fw.mem" );/* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = {
drivers/usb/host/xhci.h +1 -0
@@ -1873,6 +1873,7 @@ struct xhci_hcd {#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) +#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)unsigned int num_active_eps;unsigned int limit_active_eps;
Signature · 1 line
2.25.4
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 7 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>
Hi, I got a build error when I built an arm64 allmodconfig kernel.
building obj-arm64-next-20200518
aarch64-linux-gnu-ld: drivers/usb/host/xhci-pci.o: in function `xhci_pci_remove':/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:411:
undefined reference to `renesas_xhci_pci_exit'
aarch64-linux-gnu-ld:
/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:411:(.text+0xd8):
relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `renesas_xhci_pci_exit'
aarch64-linux-gnu-ld: drivers/usb/host/xhci-pci.o: in function `xhci_pci_probe':/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:345:
undefined reference to `renesas_xhci_check_request_fw'
aarch64-linux-gnu-ld:
/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:345:(.text+0x2298):
relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `renesas_xhci_check_request_fw'
make[1]: *** [/srv/src/kernel/next/Makefile:1126: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:185: __sub-make] Error 2
make: Target 'Image' not remade because of errors.
When I reverted this patch from todays next tag next-20200518 I managed to build.
Cheers,
Anders
Quoted 102 lines
--- drivers/usb/host/xhci-pci.c | 35 ++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 1 + 2 files changed, 35 insertions(+), 1 deletion(-)drivers/usb/host/xhci-pci.c +34
-1@@ -15,6 +15,7 @@#include "xhci.h" #include "xhci-trace.h" +#include "xhci-pci.h" #define SSIC_PORT_NUM 2#define SSIC_PORT_CFG2 0x880c@@ -87,7 +88,16 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)static void xhci_pci_quirks (struct device *dev,struct xhci_hcd *xhci) { -struct pci_dev *pdev =to_pci_dev (dev); +struct pci_dev *pdev =to_pci_dev (dev); +struct xhci_driver_data *driver_data; +const struct pci_device_id *id; + + id =pci_match_id (pdev->driver->id_table, pdev); + +if (id && id->driver_data) { + driver_data = (struct xhci_driver_data *)id->driver_data; + xhci->quirks |= driver_data->quirks; + }/* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&@@ -328,6 +338,14 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)int retval;struct xhci_hcd *xhci;struct usb_hcd *hcd; +struct xhci_driver_data *driver_data; + + driver_data = (struct xhci_driver_data *)id->driver_data; +if (driver_data && driver_data->quirks &XHCI_RENESAS_FW_QUIRK ) { + retval =renesas_xhci_check_request_fw (dev, id); +if (retval) +return retval; + }/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);@@ -389,6 +407,9 @@ static void xhci_pci_remove(struct pci_dev *dev)struct xhci_hcd *xhci; xhci =hcd_to_xhci (pci_get_drvdata (dev)); +if (xhci->quirks &XHCI_RENESAS_FW_QUIRK ) +renesas_xhci_pci_exit (dev); + xhci->xhc_state |=XHCI_STATE_REMOVING ;if (xhci->quirks &XHCI_DEFAULT_PM_RUNTIME_ALLOW )@@ -540,14 +561,26 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)/*-------------------------------------------------------------------------*/ +static const struct xhci_driver_data reneses_data = { + .quirks =XHCI_RENESAS_FW_QUIRK , + .firmware ="renesas_usb_fw.mem" , +}; +/* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids[] = { + {PCI_DEVICE (0x1912 ,0x0014 ), + .driver_data = (unsigned long )&reneses_data, + }, + {PCI_DEVICE (0x1912 ,0x0015 ), + .driver_data = (unsigned long )&reneses_data, + },/* handle any USB 3.0 xHCI controller */ {PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, pci_ids); +MODULE_FIRMWARE ("renesas_usb_fw.mem" );/* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = {drivers/usb/host/xhci.h +1
-1@@ -1873,6 +1873,7 @@ struct xhci_hcd {#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) +#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)unsigned int num_active_eps;unsigned int limit_active_eps; --2.25.4
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
Hi Anders,
Quoted 10 lines · Anders Roxell
Quoted 7 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>Hi, I got a build error when I built an arm64 allmodconfig kernel.
Thanks for this. This is happening as we have default y for USB_XHCI_PCI and then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m and USB_XHCI_PCI_RENESAS=n
So this seems to get fixed by below for me. I have tested with
- both y and m (easy)
- make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
- try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then USB_XHCI_PCI=m by kbuild :)
- try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives error prompt that it will be m due to depends
Thanks to all the fixes done by Arnd which pointed me to this. Pls verify and I will send the fix with you as reported :)
---- >8 ----
drivers/usb/host/Kconfig +1 -1
@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI + depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS default y config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - depends on USB_XHCI_PCI ---help--- Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device and
Signature · 1 line
~Vinod
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 2 lines · Vinod Koul
Hi Anders,
Hi Vinod,
Quoted 27 lines · Anders Roxell
Quoted 10 lines · Vinod Koul
Quoted 7 lines
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>Hi, I got a build error when I built an arm64 allmodconfig kernel.
Thanks for this. This is happening as we have default y for
USB_XHCI_PCIand then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m and USB_XHCI_PCI_RENESAS=nSo this seems to get fixed by below for me. I have tested with
- both y and m (easy)
- make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
- try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then USB_XHCI_PCI=m by kbuild :)
- try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives error prompt that it will be m due to depends
Quoted 2 lines
Thanks to all the fixes done by Arnd which pointed me to this. Pls verify
I was able to build an arm64 allmodconfig kernel with this change.
Cheers,
Anders
Quoted 24 lines
and I will send the fix with you as reported :)
---- >8 ----
drivers/usb/host/Kconfig +1
-2@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI + depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS default y config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - depends on USB_XHCI_PCI ---help--- Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device and --~Vinod
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 33 lines · Anders Roxell
Quoted 2 lines · Vinod Koul
Hi Anders,
Hi Vinod,
Quoted 27 lines · Anders Roxell
Quoted 10 lines · Vinod Koul
Quoted 7 lines
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>Hi, I got a build error when I built an arm64 allmodconfig kernel.
Thanks for this. This is happening as we have default y for
USB_XHCI_PCIand then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m and USB_XHCI_PCI_RENESAS=nSo this seems to get fixed by below for me. I have tested with
- both y and m (easy)
- make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
- try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then USB_XHCI_PCI=m by kbuild :)
- try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives error prompt that it will be m due to depends
Quoted 4 lines
Quoted 2 lines
Thanks to all the fixes done by Arnd which pointed me to this. Pls verify
I was able to build an arm64 allmodconfig kernel with this change.
I will send the formal patch and add your name in reported and tested. Thanks for the quick verification
Quoted 28 lines
Cheers,
AndersQuoted 24 lines
and I will send the fix with you as reported :)
---- >8 ----
drivers/usb/host/Kconfig +1
-2@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI + depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS default y config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - depends on USB_XHCI_PCI ---help--- Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device and --~Vinod
Signature · 1 line
~Vinod
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 28 lines · Vinod Koul
Quoted 27 lines · Anders Roxell
Quoted 26 lines · Vinod Koul
Quoted 10 lines · Anders Roxell
Quoted 7 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>Hi, I got a build error when I built an arm64 allmodconfig kernel.
Thanks for this. This is happening as we have default y for
USB_XHCI_PCIand then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m and USB_XHCI_PCI_RENESAS=nSo this seems to get fixed by below for me. I have tested with
- both y and m (easy)
- make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
- try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then USB_XHCI_PCI=m by kbuild :)
- try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives error prompt that it will be m due to depends
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Thanks to all the fixes done by Arnd which pointed me to this. Pls verify
I was able to build an arm64 allmodconfig kernel with this change.
I will send the formal patch and add your name in reported and tested. Thanks for the quick verification
I just checked the patch and I think this will work correctly in all cases, but it still seems a bit backwards:
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
drivers/usb/host/Kconfig +1
-0@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI + depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS default y
Quoted 7 lines
Quoted 7 lines
drivers/usb/host/Kconfig config USB_XHCI_DBGCAP · line 50
Quoted 7 lines
drivers/usb/host/Kconfig +0
-1config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - depends on USB_XHCI_PCI ---help--- Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device and
I think it would have been better to follow the normal driver abstraction here and make the renesas xhci a specialized version of the xhci driver with its own platform_driver instance that calls into the generic xhci_pci module, rather than having the generic code treat it as a quirk.
That would be more like how we handle all the ehci and ohci variants, though I'm not sure how exactly it would work with two drivers having pci_device_id tables with non-exclusive members. Presumably the generic driver would still have to know that it needs to fail its probe() function on devices that need the firmware.
Arnd
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
HI Arnd,
Quoted 64 lines · Arnd Bergmann
Quoted 28 lines · Vinod Koul
Quoted 27 lines · Anders Roxell
Quoted 26 lines · Vinod Koul
Quoted 10 lines · Anders Roxell
Quoted 7 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>Hi, I got a build error when I built an arm64 allmodconfig kernel.
Thanks for this. This is happening as we have default y for
USB_XHCI_PCIand then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m and USB_XHCI_PCI_RENESAS=nSo this seems to get fixed by below for me. I have tested with
- both y and m (easy)
- make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
- try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then USB_XHCI_PCI=m by kbuild :)
- try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives error prompt that it will be m due to dependsQuoted 7 lines
Quoted 4 lines
Quoted 2 lines
Thanks to all the fixes done by Arnd which pointed me to this. Pls verify
I was able to build an arm64 allmodconfig kernel with this change.
I will send the formal patch and add your name in reported and tested. Thanks for the quick verification
I just checked the patch and I think this will work correctly in all cases, but it still seems a bit backwards:
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
drivers/usb/host/Kconfig +1
-0@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI + depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS default yQuoted 7 lines
Quoted 7 lines
drivers/usb/host/Kconfig config USB_XHCI_DBGCAP · line 50
Quoted 7 lines
drivers/usb/host/Kconfig +0
-1config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - depends on USB_XHCI_PCI ---help--- Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device andI think it would have been better to follow the normal driver abstraction here and make the renesas xhci a specialized version of the xhci driver with its own
platform_driverinstance that calls into the genericxhci_pcimodule, rather than having the generic code treat it as a quirk.
Quoted 5 lines
That would be more like how we handle all the ehci and ohci variants, though I'm not sure how exactly it would work with two drivers having
pci_device_idtables with non-exclusive members. Presumably the generic driver would still have to know that it needs to fail itsprobe()function on devices that need the firmware.
Yeah one of the earlier versions did try this and it wasn't nice. The xhci driver claims the devices as it registers for the class. Now only solution is to ensure we load the renesas first and resort to makefile hacks..
Signature · 1 line
~Vinod
Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
In reply to Vinod KoulQuoted 38 lines · Vinod Koul
Hi Anders,
Quoted 10 lines · Anders Roxell
Quoted 7 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in pci table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>Hi, I got a build error when I built an arm64 allmodconfig kernel.
Thanks for this. This is happening as we have default y for
USB_XHCI_PCIand then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m and USB_XHCI_PCI_RENESAS=nSo this seems to get fixed by below for me. I have tested with
- both y and m (easy)
- make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
- try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then USB_XHCI_PCI=m by kbuild :)
- try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives error prompt that it will be m due to dependsThanks to all the fixes done by Arnd which pointed me to this. Pls verify and I will send the fix with you as reported :)
---- >8 ----
drivers/usb/host/Kconfig +0
-0
drivers/usb/host/Kconfig config USB_XHCI_DBGCAP · line 43
Quoted 4 lines
drivers/usb/host/Kconfig +1
-0@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI + depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS
This correctly captures the variations you describe above.
Regards,
Bjorn
Quoted 11 lines
drivers/usb/host/Kconfig +0
-1default y config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firwmare" - depends on USB_XHCI_PCI ---help--- Say 'Y' to enable the support for the Renesas xHCI controller with firwmare. Make sure you have the firwmare for the device andSignature · 2 lines
-- ~Vinod
PATCH v13 4/5 usb: renesas-xhci: Add ROM loader for uPD720201
In reply to Vinod KouluPD720201 supports ROM and allows software to program the ROM and boot from it. Add support for detecting if ROM is present, if so load the ROM if not programmed earlier.
--- drivers/usb/host/xhci-pci-renesas.c | 294 +++++++++++++++++++++++++++- 1 file changed, 287 insertions(+), 7 deletions(-)
drivers/usb/host/xhci-pci-renesas.c +287 -7
@@ -50,13 +50,33 @@#define RENESAS_RETRY 10000#define RENESAS_DELAY 10 +#define ROM_VALID_01 0x2013 +#define ROM_VALID_02 0x2026 + +static int renesas_verify_fw_version (struct pci_dev *pdev,u32 version) +{ +switch (version) { +case ROM_VALID_01 : +case ROM_VALID_02 : +return 0 ; + } +dev_err (&pdev->dev,"FW has invalid version :%d\n" , version); +return -EINVAL ; +} +static int renesas_fw_download_image (struct pci_dev *dev, -const u32 *fw,size_t step) +const u32 *fw,size_t step,bool rom) {size_t i;int err;u8 fw_status;bool data0_or_data1; +u32 status_reg; + +if (rom) + status_reg =RENESAS_ROM_STATUS_MSB ; +else + status_reg =RENESAS_FW_STATUS_MSB ;/* * The hardware does alternate between two 32-bit pages.
@@ -68,8 +88,7 @@ static int renesas_fw_download_image(struct pci_dev *dev,/* step+1. Read "Set DATAX" and confirm it is cleared. */ for (i =0 ; i <RENESAS_RETRY ; i++) { - err =pci_read_config_byte (dev,RENESAS_FW_STATUS_MSB , - &fw_status); + err =pci_read_config_byte (dev, status_reg, &fw_status);if (err) {dev_err (&dev->dev,"Read Status failed: %d\n" ,pcibios_err_to_errno (err));
@@ -101,8 +120,7 @@ static int renesas_fw_download_image(struct pci_dev *dev,udelay (100 );/* step+3. Set "Set DATAX". */ - err =pci_write_config_byte (dev,RENESAS_FW_STATUS_MSB , -BIT (data0_or_data1)); + err =pci_write_config_byte (dev, status_reg,BIT (data0_or_data1));if (err) {dev_err (&dev->dev,"Write config for DATAX failed: %d\n" ,pcibios_err_to_errno (err));
@@ -152,10 +170,84 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } -static int renesas_fw_check_running (struct pci_dev *pdev) +static bool renesas_check_rom (struct pci_dev *pdev) +{ +u16 rom_status; +int retval; + +/* Check if external ROM exists */ + retval =pci_read_config_word (pdev,RENESAS_ROM_STATUS , &rom_status); +if (retval) +return false; + + rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ; +if (rom_status) { +dev_dbg (&pdev->dev,"External ROM exists\n" ); +return true;/* External ROM exists */ + } + +return false; +} + +static int renesas_check_rom_state (struct pci_dev *pdev) { +u16 rom_state; +u32 version;int err; + +/* check FW version */ + err =pci_read_config_dword (pdev,RENESAS_FW_VERSION , &version); +if (err) +return pcibios_err_to_errno (err); + + version &=RENESAS_FW_VERSION_FIELD ; + version = version >>RENESAS_FW_VERSION_OFFSET ; + + err =renesas_verify_fw_version (pdev, version); +if (err) +return err; + +/* +* Test if ROM is present and loaded, if so we can skip everything +*/ + err =pci_read_config_word (pdev,RENESAS_ROM_STATUS , &rom_state); +if (err) +return pcibios_err_to_errno (err); + +if (rom_state &BIT (15 )) { +/* ROM exists */ +dev_dbg (&pdev->dev,"ROM exists\n" ); + +/* Check the "Result Code" Bits (6:4) and act accordingly */ +switch (rom_state &RENESAS_ROM_STATUS_RESULT ) { +case RENESAS_ROM_STATUS_SUCCESS : +return 0 ; + +case RENESAS_ROM_STATUS_NO_RESULT :/* No result yet */ +return 0 ; + +case RENESAS_ROM_STATUS_ERROR :/* Error State */ +default :/* All other states are marked as "Reserved states" */ +dev_err (&pdev->dev,"Invalid ROM.." ); +break ; + } + } + +return -EIO ; +} + +static int renesas_fw_check_running (struct pci_dev *pdev) +{u8 fw_state; +int err; + +/* Check if device has ROM and loaded, if so skip everything */ + err =renesas_check_rom (pdev); +if (err) {/* we have rom */ + err =renesas_check_rom_state (pdev); +if (!err) +return err; + }/* * Test if the device is actually needing the firmware. As most
@@ -243,7 +335,7 @@ static int renesas_fw_download(struct pci_dev *pdev,/* 1 - 10 follow one step after the other. */ for (i =0 ; i < fw->size /4 ; i++) { - err =renesas_fw_download_image (pdev, fw_data, i); + err =renesas_fw_download_image (pdev, fw_data, i, false);if (err) { dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
@@ -311,11 +403,199 @@ static int renesas_fw_download(struct pci_dev *pdev,return 0 ; } +static void renesas_rom_erase (struct pci_dev *pdev) +{ +int retval, i; +u8 status; + +dev_dbg (&pdev->dev,"Performing ROM Erase...\n" ); + retval =pci_write_config_dword (pdev,RENESAS_DATA0 , +RENESAS_ROM_ERASE_MAGIC ); +if (retval) { +dev_err (&pdev->dev,"ROM erase, magic word write failed: %d\n" , +pcibios_err_to_errno (retval)); +return ; + } + + retval =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (retval) { +dev_err (&pdev->dev,"ROM status read failed: %d\n" , +pcibios_err_to_errno (retval)); +return ; + } + status |=RENESAS_ROM_STATUS_ERASE ; + retval =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , status); +if (retval) { +dev_err (&pdev->dev,"ROM erase set word write failed\n" ); +return ; + } + +/* sleep a bit while ROM is erased */ +msleep (20 ); + +for (i =0 ; i <RENESAS_RETRY ; i++) { + retval =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , + &status); + status &=RENESAS_ROM_STATUS_ERASE ; +if (!status) +break ; + +mdelay (RENESAS_DELAY ); + } + +if (i ==RENESAS_RETRY ) +dev_dbg (&pdev->dev,"Chip erase timedout: %x\n" , status); + +dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); +} + +static bool renesas_setup_rom (struct pci_dev *pdev,const struct firmware *fw) +{ +const u32 *fw_data = (const u32 *)fw->data; +int err, i; +u8 status; + +/* 2. Write magic word to Data0 */ + err =pci_write_config_dword (pdev,RENESAS_DATA0 , +RENESAS_ROM_WRITE_MAGIC ); +if (err) +return false; + +/* 3. Set External ROM access */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , +RENESAS_ROM_STATUS_ACCESS ); +if (err) + goto remove_bypass; + +/* 4. Check the result */ + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (err) + goto remove_bypass; + status &=GENMASK (6 ,4 ); +if (status) { +dev_err (&pdev->dev, +"setting external rom failed: %x\n" , status); + goto remove_bypass; + } + +/* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */ +for (i =0 ; i < fw->size /4 ; i++) { + err =renesas_fw_download_image (pdev, fw_data, i, true); +if (err) { +dev_err (&pdev->dev, +"ROM Download Step %d failed at position %d bytes with (%d)\n" , + i, i *4 , err); + goto remove_bypass; + } + } + +/* +* wait till DATA0/1 is cleared +*/ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS_MSB , + &status); +if (err) + goto remove_bypass; +if (!(status & (BIT (0 ) |BIT (1 )))) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"Final Firmware ROM Download step timed out\n" ); + goto remove_bypass; + } + +/* 17. Remove bypass */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS ,0 ); +if (err) +return false; + +udelay (10 ); + +/* 18. check result */ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (err) { +dev_err (&pdev->dev,"Read ROM status failed:%d\n" , +pcibios_err_to_errno (err)); +return false; + } + status &=RENESAS_ROM_STATUS_RESULT ; +if (status ==RENESAS_ROM_STATUS_SUCCESS ) { +dev_dbg (&pdev->dev,"Download ROM success\n" ); +break ; + } +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) {/* Timed out */ +dev_err (&pdev->dev, +"Download to external ROM TO: %x\n" , status); +return false; + } + +dev_dbg (&pdev->dev,"Download to external ROM succeeded\n" ); + +/* Last step set Reload */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , +RENESAS_ROM_STATUS_RELOAD ); +if (err) { +dev_err (&pdev->dev,"Set ROM execute failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +/* +* wait till Reload is cleared +*/ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (err) +return false; +if (!(status &RENESAS_ROM_STATUS_RELOAD )) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"ROM Exec timed out: %x\n" , status); +return false; + } + +return true; + +remove_bypass: +pci_write_config_byte (pdev,RENESAS_ROM_STATUS ,0 ); +return false; +} +static int renesas_load_fw (struct pci_dev *pdev,const struct firmware *fw) {int err =0 ; +bool rom; + +/* Check if the device has external ROM */ + rom =renesas_check_rom (pdev); +if (rom) { +/* perform chip erase first */ +renesas_rom_erase (pdev); + +/* lets try loading fw on ROM first */ + rom =renesas_setup_rom (pdev, fw); +if (!rom) { +dev_dbg (&pdev->dev, +"ROM load failed, falling back on FW load\n" ); + }else { +dev_dbg (&pdev->dev, +"ROM load success\n" ); + goto exit; + } + } err =renesas_fw_download (pdev, fw); + +exit:if (err)dev_err (&pdev->dev,"firmware failed to download (%d)." , err);return err;
Signature · 1 line
2.25.4
PATCH v13 5/5 usb: xhci: provide a debugfs hook for erasing rom
In reply to Vinod Koulrun "echo 1 > /sys/kernel/debug/renesas-usb/rom_erase" to erase firmware when driver is loaded.
Subsequent init of driver shall reload the firmware
--- drivers/usb/host/xhci-pci-renesas.c | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
drivers/usb/host/xhci-pci-renesas.c +33 -0
@@ -2,6 +2,7 @@/* Copyright (C) 2019-2020 Linaro Limited */ #include <linux/acpi.h> +#include <linux/debugfs.h> #include <linux/firmware.h> #include <linux/module.h> #include <linux/pci.h>
@@ -170,6 +171,8 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } +static void debugfs_init (struct pci_dev *pdev); +static bool renesas_check_rom (struct pci_dev *pdev) {u16 rom_status;
@@ -183,6 +186,7 @@ static bool renesas_check_rom(struct pci_dev *pdev) rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ;if (rom_status) {dev_dbg (&pdev->dev,"External ROM exists\n" ); +debugfs_init (pdev);return true;/* External ROM exists */ }
@@ -449,6 +453,34 @@ static void renesas_rom_erase(struct pci_dev *pdev)dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); } +static int debugfs_rom_erase (void *data,u64 value) +{ +struct pci_dev *pdev = data; + +if (value ==1 ) { +dev_dbg (&pdev->dev,"Userspace requested ROM erase\n" ); +renesas_rom_erase (pdev); +return 0 ; + } +return -EINVAL ; +} +DEFINE_DEBUGFS_ATTRIBUTE (rom_erase_ops,NULL , debugfs_rom_erase,"%llu\n" ); + +static struct dentry *debugfs_root; + +static void debugfs_init (struct pci_dev *pdev) +{ + debugfs_root =debugfs_create_dir ("renesas_usb" ,NULL ); + +debugfs_create_file ("rom_erase" ,0200 , debugfs_root, + pdev, &rom_erase_ops); +} + +static void debugfs_exit (void ) +{ +debugfs_remove_recursive (debugfs_root); +} +static bool renesas_setup_rom (struct pci_dev *pdev,const struct firmware *fw) {const u32 *fw_data = (const u32 *)fw->data;
@@ -639,6 +671,7 @@ EXPORT_SYMBOL_GPL(renesas_xhci_check_request_fw);void renesas_xhci_pci_exit (struct pci_dev *dev) { +debugfs_exit (); }EXPORT_SYMBOL_GPL (renesas_xhci_pci_exit);
Signature · 1 line
2.25.4
Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
Quoted 51 lines · Vinod Koul
run "echo 1 >
/sys/kernel/debug/renesas-usb/rom_erase" to erase firmware when driver is loaded.Subsequent init of driver shall reload the firmware
Signed-off-by Vinod Koul <[email protected]>--- drivers/usb/host/xhci-pci-renesas.c | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)drivers/usb/host/xhci-pci-renesas.c +12
-0@@ -2,6 +2,7 @@/* Copyright (C) 2019-2020 Linaro Limited */ #include <linux/acpi.h> +#include <linux/debugfs.h> #include <linux/firmware.h> #include <linux/module.h> #include <linux/pci.h> @@ -170,6 +171,8 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } +static void debugfs_init (struct pci_dev *pdev); +static bool renesas_check_rom (struct pci_dev *pdev) {u16 rom_status;@@ -183,6 +186,7 @@ static bool renesas_check_rom(struct pci_dev *pdev) rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ;if (rom_status) {dev_dbg (&pdev->dev,"External ROM exists\n" ); +debugfs_init (pdev);return true;/* External ROM exists */ }@@ -449,6 +453,34 @@ static void renesas_rom_erase(struct pci_dev *pdev)dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); } +static int debugfs_rom_erase (void *data,u64 value) +{ +struct pci_dev *pdev = data; + +if (value ==1 ) { +dev_dbg (&pdev->dev,"Userspace requested ROM erase\n" ); +renesas_rom_erase (pdev); +return 0 ;
drivers/usb/host/xhci-pci-renesas.c static void renesas_rom_erase(struct pci_dev *pdev) · line 473
Quoted 10 lines
drivers/usb/host/xhci-pci-renesas.c +10
-0+ } +return -EINVAL ; +} +DEFINE_DEBUGFS_ATTRIBUTE (rom_erase_ops,NULL , debugfs_rom_erase,"%llu\n" ); + +static struct dentry *debugfs_root; + +static void debugfs_init (struct pci_dev *pdev) +{ + debugfs_root =debugfs_create_dir ("renesas_usb" ,NULL );
This will create a renesas_usb directory right under debugfs root. xhci has its own struct dentry xhci_debugfs_root;
Use that as parent instead
Also note that debugs_create_dir() can fail, for example if debugfs isn't supported.
- Mathias
Greg Kroah-Hartman
maintainerRe: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
Quoted 58 lines · Mathias Nyman
Quoted 57 lines · Vinod Koul
run "echo 1 >
/sys/kernel/debug/renesas-usb/rom_erase" to erase firmware when driver is loaded.Subsequent init of driver shall reload the firmware
Signed-off-by Vinod Koul <[email protected]>--- drivers/usb/host/xhci-pci-renesas.c | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)drivers/usb/host/xhci-pci-renesas.c +18
-0@@ -2,6 +2,7 @@/* Copyright (C) 2019-2020 Linaro Limited */ #include <linux/acpi.h> +#include <linux/debugfs.h> #include <linux/firmware.h> #include <linux/module.h> #include <linux/pci.h> @@ -170,6 +171,8 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } +static void debugfs_init (struct pci_dev *pdev); +static bool renesas_check_rom (struct pci_dev *pdev) {u16 rom_status;@@ -183,6 +186,7 @@ static bool renesas_check_rom(struct pci_dev *pdev) rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ;if (rom_status) {dev_dbg (&pdev->dev,"External ROM exists\n" ); +debugfs_init (pdev);return true;/* External ROM exists */ }@@ -449,6 +453,34 @@ static void renesas_rom_erase(struct pci_dev *pdev)dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); } +static int debugfs_rom_erase (void *data,u64 value) +{ +struct pci_dev *pdev = data; + +if (value ==1 ) { +dev_dbg (&pdev->dev,"Userspace requested ROM erase\n" ); +renesas_rom_erase (pdev); +return 0 ; + } +return -EINVAL ; +} +DEFINE_DEBUGFS_ATTRIBUTE (rom_erase_ops,NULL , debugfs_rom_erase,"%llu\n" ); + +static struct dentry *debugfs_root;
Quoted 8 lines
drivers/usb/host/xhci-pci-renesas.c static void renesas_rom_erase(struct pci_dev *pdev) · line 473
Quoted 4 lines
drivers/usb/host/xhci-pci-renesas.c +4
-0+ +static void debugfs_init (struct pci_dev *pdev) +{ + debugfs_root =debugfs_create_dir ("renesas_usb" ,NULL );This will create a
renesas_usbdirectory right under debugfs root. xhci has its own struct dentryxhci_debugfs_root;
Use that as parent instead
Ah, I misssed that, a follow-on patch can do this, right?
Quoted 1 line
Also note that
debugs_create_dir()can fail, for example if debugfs isn't supported.
Doesn't matter, never check the result, just move on and all is fine :)
This logic is correct, no need for it to be changed.
thanks,
greg k-h
Greg Kroah-Hartman
maintainerRe: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
Quoted 68 lines · Greg Kroah-Hartman
Quoted 58 lines · Mathias Nyman
Quoted 57 lines · Vinod Koul
run "echo 1 >
/sys/kernel/debug/renesas-usb/rom_erase" to erase firmware when driver is loaded.Subsequent init of driver shall reload the firmware
Signed-off-by Vinod Koul <[email protected]>--- drivers/usb/host/xhci-pci-renesas.c | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)drivers/usb/host/xhci-pci-renesas.c +18
-0@@ -2,6 +2,7 @@/* Copyright (C) 2019-2020 Linaro Limited */ #include <linux/acpi.h> +#include <linux/debugfs.h> #include <linux/firmware.h> #include <linux/module.h> #include <linux/pci.h> @@ -170,6 +171,8 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } +static void debugfs_init (struct pci_dev *pdev); +static bool renesas_check_rom (struct pci_dev *pdev) {u16 rom_status;@@ -183,6 +186,7 @@ static bool renesas_check_rom(struct pci_dev *pdev) rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ;if (rom_status) {dev_dbg (&pdev->dev,"External ROM exists\n" ); +debugfs_init (pdev);return true;/* External ROM exists */ }@@ -449,6 +453,34 @@ static void renesas_rom_erase(struct pci_dev *pdev)dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); } +static int debugfs_rom_erase (void *data,u64 value) +{ +struct pci_dev *pdev = data; + +if (value ==1 ) { +dev_dbg (&pdev->dev,"Userspace requested ROM erase\n" ); +renesas_rom_erase (pdev); +return 0 ; + } +return -EINVAL ; +} +DEFINE_DEBUGFS_ATTRIBUTE (rom_erase_ops,NULL , debugfs_rom_erase,"%llu\n" ); + +static struct dentry *debugfs_root;Quoted 8 lines
drivers/usb/host/xhci-pci-renesas.c static void renesas_rom_erase(struct pci_dev *pdev) · line 473
Quoted 4 lines
drivers/usb/host/xhci-pci-renesas.c +4
-0+ +static void debugfs_init (struct pci_dev *pdev) +{ + debugfs_root =debugfs_create_dir ("renesas_usb" ,NULL );This will create a
renesas_usbdirectory right under debugfs root. xhci has its own struct dentryxhci_debugfs_root;
Use that as parent instead
Quoted 1 line
Ah, I misssed that, a follow-on patch can do this, right?
Actually, a whole new series with this changed is good, I didn't take these for now, for some reason I thought I had.
thanks,
greg k-h
Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
Quoted 6 lines · Greg Kroah-Hartman
Quoted 1 line · Greg Kroah-Hartman
Ah, I misssed that, a follow-on patch can do this, right?
Actually, a whole new series with this changed is good, I didn't take these for now, for some reason I thought I had.
Do you mind taking these except this patch (last). I will spin this later
Debugfs was for my own testing to be able to erase so that I can test load :) No hurry for users to have that yet...
Thanks
Signature · 1 line
~Vinod
Greg Kroah-Hartman
maintainerRe: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
Quoted 10 lines · Vinod Koul
Quoted 6 lines · Greg Kroah-Hartman
Quoted 1 line · Greg Kroah-Hartman
Ah, I misssed that, a follow-on patch can do this, right?
Actually, a whole new series with this changed is good, I didn't take these for now, for some reason I thought I had.
Do you mind taking these except this patch (last). I will spin this later
Can you resend, they are not in my patch queue anymore.
thanks,
greg k-h
Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
Quoted 6 lines · Greg Kroah-Hartman
Quoted 5 lines · Vinod Koul
Quoted 4 lines · Greg Kroah-Hartman
Quoted 1 line · Greg Kroah-Hartman
Ah, I misssed that, a follow-on patch can do this, right?
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Actually, a whole new series with this changed is good, I didn't take these for now, for some reason I thought I had.
Do you mind taking these except this patch (last). I will spin this later
Can you resend, they are not in my patch queue anymore.
Sure, will resend dropping patch 5.
Signature · 1 line
~Vinod
Quoted 8 lines · Vinod Koul
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
First four patches look ok to me, but 5/5 that adds rom erase debugfs support still needs some work.
If you prefer I can take the first four, maybe we can get them to 5.8, and then later add that debugs rom erase support.
Let me know what you prefer
-Mathias
Greg Kroah-Hartman
maintainerQuoted 10 lines · Mathias Nyman
Quoted 8 lines · Vinod Koul
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
Quoted 7 lines
First four patches look ok to me, but 5/5 that adds rom erase debugfs support still needs some work.
If you prefer I can take the first four, maybe we can get them to 5.8, and then later add that debugs rom erase support.
Let me know what you prefer
Oops, I just added all of these to my testing tree :)
What's wrong with the debugfs patch? I can drop it, but it seemed simple enough to me.
thanks,
greg k-h
Quoted 17 lines · Greg Kroah-Hartman
Quoted 16 lines · Mathias Nyman
Quoted 8 lines · Vinod Koul
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
First four patches look ok to me, but 5/5 that adds rom erase debugfs support still needs some work.
If you prefer I can take the first four, maybe we can get them to 5.8, and then later add that debugs rom erase support.
Quoted 6 lines
Quoted 1 line
Let me know what you prefer
Oops, I just added all of these to my testing tree :)
What's wrong with the debugfs patch? I can drop it, but it seemed simple enough to me.
Added "usb_renesas" directory under debugfs root when we have easily accessible debugfs/usb/xhci directory to use as parent.
Also not checking if adding directory failed (if debufs not supported)
-Mathias
Greg Kroah-Hartman
maintainerQuoted 20 lines · Mathias Nyman
Quoted 19 lines · Greg Kroah-Hartman
Quoted 17 lines · Mathias Nyman
Quoted 8 lines · Vinod Koul
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
First four patches look ok to me, but 5/5 that adds rom erase debugfs support still needs some work.
If you prefer I can take the first four, maybe we can get them to 5.8, and then later add that debugs rom erase support.
Let me know what you prefer
Quoted 7 lines
Quoted 4 lines
Oops, I just added all of these to my testing tree :)
What's wrong with the debugfs patch? I can drop it, but it seemed simple enough to me.
Added "
usb_renesas" directory under debugfs root when we have easily accessible debugfs/usb/xhci directory to use as parent.
I've responded to the patch now, sorry I missed that.
Quoted 1 line
Also not checking if adding directory failed (if debufs not supported)
That's fine and encouraged to do :)
thanks,
greg k-h
Quoted 23 lines · Greg Kroah-Hartman
Quoted 22 lines · Mathias Nyman
Quoted 21 lines · Greg Kroah-Hartman
Quoted 10 lines · Mathias Nyman
Quoted 8 lines · Vinod Koul
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
Quoted 7 lines
First four patches look ok to me, but 5/5 that adds rom erase debugfs support still needs some work.
If you prefer I can take the first four, maybe we can get them to 5.8, and then later add that debugs rom erase support.
Let me know what you prefer
Oops, I just added all of these to my testing tree :)
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
What's wrong with the debugfs patch? I can drop it, but it seemed simple enough to me.
Added "
usb_renesas" directory under debugfs root when we have easily accessible debugfs/usb/xhci directory to use as parent.I've responded to the patch now, sorry I missed that.
I can send an update on top of this to use xhci root, or respin this patch, either ways is fine by me.
Quoted 3 lines
Quoted 1 line
Also not checking if adding directory failed (if debufs not supported)
That's fine and encouraged to do :)
Yes, I have known you 'encouraging' folks for that, hence coded it :)
Thanks
Signature · 1 line
~Vinod