Skip to contentSkip to conversation

Add battery charger driver support for MP2629

PATCH In review Saravanan Sekar 4 participants 11 messages May 26, 2020 – May 31, 2020

Subsystems (5)
lore
Share & tools
lore

Saravanan Sekar

author maintainer
#0 lore raw

v12 cover Add battery charger driver support for MP2629

changes in v12:
- added SOB Acked-for-MFD-by: Lee Jones <[email protected]>

changes in v11:
- module_remove part replaced by devm_add_action_or_reset in charger patch
- minor review comments solved in mfd and adc patch

I expect, that Lee will provide an immutable branch for me and Jonathan once the MFD bits have been reviewed. Please tell me, if I should prepare one instead.

-- Sebastian

changes in v10:
- fixed typo, \n in dev_err
- dt bindings Warning (unit_address_vs_reg) reported by bot

changes in v9:
- fixed review comments in mp2629 power supply such as resource based iio channel, replace workqueue by threaded irq, irq get with "_optional"

changes in v8:
- fixed order of call in probe/remove in iio adc
- add ABI documentation for mp2629 power supply

changes in v7:
- fixed probe/remove order, managed and unmanaged call mix use in adc.
- Documentation dual license, i2c node with controller address

Overall looks good to me, FWIW,

One question though in reply to patch 4.

changes in v6:
- removed includes types.h in mfd, of_device.h in adc.
- fixed review comments parentheses, err check, kstrtouint

changes in v5:
- removed platfrom data stored in mfd and directly accessed mfd struct in child
- fixed spell check and capitalization in mfd and documentation

changes in v4:
- fixed capitalization in mfg Kconfig and documentation

changes in v3:
- regmap for children passed using platform data and remove mfd driver info access directly from children

changes in v2:
- removed EXPORT_SYMBOL of register set/get helper
- regmap bit filed used, fixed other review comments

This patch series add support for Battery charger control driver for Monolithic Power System's MP2629 chipset, includes MFD driver for ADC battery & input power supply measurement and battery charger control driver.

Thanks,
Saravanan

Saravanan Sekar (6):
dt-bindings: mfd: add document bindings for mp2629
mfd: mp2629: Add support for mps battery charger
iio: adc: mp2629: Add support for mp2629 ADC driver
power: supply: Add support for mps mp2629 battery charger
power: supply: mp2629: Add impedance compensation config
MAINTAINERS: Add entry for mp2629 Battery Charger driver

 .../ABI/testing/sysfs-class-power-mp2629      |   8 +
 .../devicetree/bindings/mfd/mps,mp2629.yaml   |  62 ++
 MAINTAINERS                                   |   5 +
 drivers/iio/adc/Kconfig                       |  10 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/mp2629_adc.c                  | 208 ++++++
 drivers/mfd/Kconfig                           |   9 +
 drivers/mfd/Makefile                          |   2 +
 drivers/mfd/mp2629.c                          |  79 +++
 drivers/power/supply/Kconfig                  |  10 +
 drivers/power/supply/Makefile                 |   1 +
 drivers/power/supply/mp2629_charger.c         | 669 ++++++++++++++++++
 include/linux/mfd/mp2629.h                    |  26 +
 13 files changed, 1090 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
 create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
 create mode 100644 drivers/iio/adc/mp2629_adc.c
 create mode 100644 drivers/mfd/mp2629.c
 create mode 100644 drivers/power/supply/mp2629_charger.c
 create mode 100644 include/linux/mfd/mp2629.h
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH v12 1/6 dt-bindings: mfd: add document bindings for mp2629

Add device tree binding information for mp2629 mfd driver.

---
 .../devicetree/bindings/mfd/mps,mp2629.yaml   | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
Documentation/devicetree/bindings/mfd/mps,mp2629.yaml new file +62 -0
new file mode 100644
index 000000000000..f91acc42d652
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MP2629 Battery Charger PMIC from Monolithic Power System.
+
+maintainers:
+  - Saravanan Sekar <[email protected]>
+
+description: |
+  MP2629 is a PMIC providing battery charging and power supply for smartphones,
+  wireless camera and portable devices. Chip is controlled over I2C.
+
+  The battery charge management device handles battery charger controller and
+  ADC IIO device for battery, system voltage
+
+properties:
+  compatible:
+    const: mps,mp2629
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@4b {
+            compatible = "mps,mp2629";
+            reg = <0x4b>;
+
+            interrupt-controller;
+            interrupt-parent = <&gpio2>;
+            #interrupt-cells = <2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH v12 2/6 mfd: mp2629: Add support for mps battery charger

In reply to Saravanan Sekar

mp2629 is a highly-integrated switching-mode battery charge management device for single-cell Li-ion or Li-polymer battery.

Add MFD core enables chip access for ADC driver for battery readings, and a power supply battery-charger driver

---
 drivers/mfd/Kconfig        |  9 +++++
 drivers/mfd/Makefile       |  2 +
 drivers/mfd/mp2629.c       | 79 ++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/mp2629.h | 17 ++++++++
 4 files changed, 107 insertions(+)
 create mode 100644 drivers/mfd/mp2629.c
 create mode 100644 include/linux/mfd/mp2629.h
drivers/mfd/Kconfig +9 -0
index 3c547ed575e6..fbf287098970 100644
@@ -434,6 +434,15 @@ config MFD_MC13XXX_I2C
 	help
 	  Select this if your MC13xxx is connected via an I2C bus.
 
+config MFD_MP2629
+	tristate "Monolithic Power Systems MP2629 ADC and Battery charger"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Select this option to enable support for Monolithic Power Systems
+	  battery charger. This provides ADC, thermal and battery charger power
+	  management functions.
+
 config MFD_MXS_LRADC
 	tristate "Freescale i.MX23/i.MX28 LRADC"
 	depends on ARCH_MXS || COMPILE_TEST
drivers/mfd/Makefile +2 -0
index f935d10cbf0f..d6c210f96d02 100644
@@ -170,6 +170,8 @@ obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 obj-$(CONFIG_MFD_MAX8997)	+= max8997.o max8997-irq.o
 obj-$(CONFIG_MFD_MAX8998)	+= max8998.o max8998-irq.o
 
+obj-$(CONFIG_MFD_MP2629)	+= mp2629.o
+
 pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
drivers/mfd/mp2629.c new file +79 -0

79 lines not on this page · raw message

include/linux/mfd/mp2629.h new file +17 -0
new file mode 100644
index 000000000000..baaeeaf82949
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Monolithic Power Systems, Inc
+ */
+
+#ifndef __MP2629_H__
+#define __MP2629_H__
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+struct mp2629_data {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#endif
Signature · 1 line
2.17.1
author maintainer
#3 lore raw

PATCH v12 3/6 iio: adc: mp2629: Add support for mp2629 ADC driver

In reply to Saravanan Sekar

Add support for 8-bit resolution ADC readings for input power supply and battery charging measurement. Provides voltage, current readings to mp2629 power supply driver.

---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/mp2629_adc.c | 208 +++++++++++++++++++++++++++++++++++
 include/linux/mfd/mp2629.h   |   9 ++
 4 files changed, 228 insertions(+)
 create mode 100644 drivers/iio/adc/mp2629_adc.c
drivers/iio/adc/Kconfig +10 -0
index 82e33082958c..ef0c0cd31855 100644
@@ -680,6 +680,16 @@ config MESON_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called meson_saradc.
 
+config MP2629_ADC
+	tristate "Monolithic MP2629 ADC driver"
+	depends on MFD_MP2629
+	help
+	  Say yes to have support for battery charger IC MP2629 ADC device
+	  accessed over I2C.
+
+	  This driver provides ADC conversion of system, input power supply
+	  and battery voltage & current information.
+
 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C
drivers/iio/adc/Makefile +1 -0
index 919228900df9..f14416c245a6 100644
@@ -64,6 +64,7 @@ obj-$(CONFIG_MCP3911) += mcp3911.o
 obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
+obj-$(CONFIG_MP2629_ADC) += mp2629_adc.o
 obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
drivers/iio/adc/mp2629_adc.c new file +208 -0

208 lines not on this page · raw message

include/linux/mfd/mp2629.h +9 -0
index baaeeaf82949..89b706900b57 100644
@@ -14,4 +14,13 @@ struct mp2629_data {
 	struct regmap *regmap;
 };
 
+enum mp2629_adc_chan {
+	MP2629_BATT_VOLT,
+	MP2629_SYSTEM_VOLT,
+	MP2629_INPUT_VOLT,
+	MP2629_BATT_CURRENT,
+	MP2629_INPUT_CURRENT,
+	MP2629_ADC_CHAN_END
+};
+
 #endif
Signature · 1 line
2.17.1
author maintainer
#4 lore raw

PATCH v12 4/6 power: supply: Add support for mps mp2629 battery charger

In reply to Saravanan Sekar

The mp2629 provides switching-mode battery charge management for single-cell Li-ion or Li-polymer battery. Driver supports the access/control input source and battery charging parameters.

---
 drivers/power/supply/Kconfig          |  10 +
 drivers/power/supply/Makefile         |   1 +
 drivers/power/supply/mp2629_charger.c | 669 ++++++++++++++++++++++++++
 3 files changed, 680 insertions(+)
 create mode 100644 drivers/power/supply/mp2629_charger.c
drivers/power/supply/Kconfig +10 -0
index f3424fdce341..a46643f5e2fb 100644
@@ -541,6 +541,16 @@ config CHARGER_MAX8998
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX8998/LP3974 PMICs.
 
+config CHARGER_MP2629
+	tristate "Monolithic power system MP2629 Battery charger"
+	depends on MFD_MP2629
+	depends on MP2629_ADC
+	depends on IIO
+	help
+	  Select this option to enable support for Monolithic power system
+	  Battery charger. This driver provides Battery charger power management
+	  functions on the systems.
+
 config CHARGER_QCOM_SMBB
 	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
 	depends on MFD_SPMI_PMIC || COMPILE_TEST
drivers/power/supply/Makefile +1 -0
index 6c7da920ea83..41cb64f09e49 100644
@@ -75,6 +75,7 @@ obj-$(CONFIG_CHARGER_MAX77650)	+= max77650-charger.o
 obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+obj-$(CONFIG_CHARGER_MP2629)	+= mp2629_charger.o
 obj-$(CONFIG_CHARGER_QCOM_SMBB)	+= qcom_smbb.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
drivers/power/supply/mp2629_charger.c new file +669 -0

669 lines not on this page · raw message

Signature · 1 line
2.17.1
author maintainer
#5 lore raw

PATCH v12 5/6 power: supply: mp2629: Add impedance compensation config

In reply to Saravanan Sekar

Allows the user to compensate the intrinsic resistance of the battery to accelerate the charging cycle.

---
 Documentation/ABI/testing/sysfs-class-power-mp2629 | 8 ++++++++
 1 file changed, 8 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
Documentation/ABI/testing/sysfs-class-power-mp2629 new file +8 -0
new file mode 100644
index 000000000000..327a07e22805
@@ -0,0 +1,8 @@
+What:		/sys/class/power_supply/mp2629_battery/batt_impedance_compen
+Date:		April 2020
+KernelVersion:	5.7
+Description:
+		Represents a battery impedance compensation to accelerate charging.
+
+                Access: Read, Write
+                Valid values: Represented in milli-ohms. Valid range is [0, 140].
Signature · 1 line
2.17.1
author maintainer
#6 lore raw

PATCH v12 6/6 MAINTAINERS: Add entry for mp2629 Battery Charger driver

In reply to Saravanan Sekar

Add MAINTAINERS entry for Monolithic Power Systems mp2629 Charger driver.

---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)
MAINTAINERS +5 -0
index 32a95d162f06..0f82d5a7a614 100644
@@ -11358,10 +11358,15 @@ F:	drivers/tty/mxser.*
 MONOLITHIC POWER SYSTEM PMIC DRIVER
 M:	Saravanan Sekar <[email protected]>
 S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
 F:	Documentation/devicetree/bindings/regulator/mps,mp*.yaml
+F:	drivers/iio/adc/mp2629_adc.c
+F:	drivers/mfd/mp2629.c
+F:	drivers/power/supply/mp2629_charger.c
 F:	drivers/regulator/mp5416.c
 F:	drivers/regulator/mpq7920.c
 F:	drivers/regulator/mpq7920.h
+F:	include/linux/mfd/mp2629.h
 
 MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <[email protected]>
Signature · 1 line
2.17.1
#7 lore raw
In reply to Saravanan Sekar
Quoted 2 lines · Saravanan Sekar

changes in v12:
- added SOB Acked-for-MFD-by: Lee Jones <[email protected]>

Looks like you added my Acked-by to every patch, when actually I only Acked the MFD one. Fortunately, as I'm the one applying these, I can strip them off, but please be more careful about which *-bys you apply to which patches in the future.

Quoted 7 lines

changes in v11:
- module_remove part replaced by devm_add_action_or_reset in charger patch
- minor review comments solved in mfd and adc patch

I expect, that Lee will provide an immutable branch for me and Jonathan once the MFD bits have been reviewed. Please tell me, if I should prepare one instead.

I'll do this now.

Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#8 lore raw

[GIT PULL] Immutable branch between MFD, IIO and Power due for the v5.8 merge window

In reply to Saravanan Sekar

Enjoy!

The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:

Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-iio-power-v5.8

for you to fetch changes up to 904ac71f4b0c1c26ec47ff597cb3d3c7d36e618d:

MAINTAINERS: Add entry for mp2629 Battery Charger driver (2020-05-26 10:42:02 +0100)

----------------------------------------------------------------
Immutable branch between MFD, IIO and Power due for the v5.8 merge window

----------------------------------------------------------------
Saravanan Sekar (6):
dt-bindings: mfd: Add document bindings for mp2629
mfd: mp2629: Add support for mps battery charger
iio: adc: mp2629: Add support for mp2629 ADC driver
power: supply: Add support for mps mp2629 battery charger
power: supply: mp2629: Add impedance compensation config
MAINTAINERS: Add entry for mp2629 Battery Charger driver

 Documentation/ABI/testing/sysfs-class-power-mp2629 |   8 +
 .../devicetree/bindings/mfd/mps,mp2629.yaml        |  62 ++
 MAINTAINERS                                        |   5 +
 drivers/iio/adc/Kconfig                            |  10 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/mp2629_adc.c                       | 208 +++++++
 drivers/mfd/Kconfig                                |   9 +
 drivers/mfd/Makefile                               |   2 +
 drivers/mfd/mp2629.c                               |  79 +++
 drivers/power/supply/Kconfig                       |  10 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/mp2629_charger.c              | 669 +++++++++++++++++++++
 include/linux/mfd/mp2629.h                         |  26 +
 13 files changed, 1090 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
 create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
 create mode 100644 drivers/iio/adc/mp2629_adc.c
 create mode 100644 drivers/mfd/mp2629.c
 create mode 100644 drivers/power/supply/mp2629_charger.c
 create mode 100644 include/linux/mfd/mp2629.h
Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#9 lore raw

Re: [GIT PULL] Immutable branch between MFD, IIO and Power due for the v5.8 merge window

Hi,

Thanks for taking care of it Lee, merged!

-- Sebastian

Quoted 52 lines · Lee Jones

Enjoy!

The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:

Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-iio-power-v5.8

for you to fetch changes up to 904ac71f4b0c1c26ec47ff597cb3d3c7d36e618d:

MAINTAINERS: Add entry for mp2629 Battery Charger driver (2020-05-26 10:42:02 +0100)

----------------------------------------------------------------
Immutable branch between MFD, IIO and Power due for the v5.8 merge window

----------------------------------------------------------------
Saravanan Sekar (6):
dt-bindings: mfd: Add document bindings for mp2629
mfd: mp2629: Add support for mps battery charger
iio: adc: mp2629: Add support for mp2629 ADC driver
power: supply: Add support for mps mp2629 battery charger
power: supply: mp2629: Add impedance compensation config
MAINTAINERS: Add entry for mp2629 Battery Charger driver

 Documentation/ABI/testing/sysfs-class-power-mp2629 |   8 +
 .../devicetree/bindings/mfd/mps,mp2629.yaml        |  62 ++
 MAINTAINERS                                        |   5 +
 drivers/iio/adc/Kconfig                            |  10 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/mp2629_adc.c                       | 208 +++++++
 drivers/mfd/Kconfig                                |   9 +
 drivers/mfd/Makefile                               |   2 +
 drivers/mfd/mp2629.c                               |  79 +++
 drivers/power/supply/Kconfig                       |  10 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/mp2629_charger.c              | 669 +++++++++++++++++++++
 include/linux/mfd/mp2629.h                         |  26 +
 13 files changed, 1090 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
 create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
 create mode 100644 drivers/iio/adc/mp2629_adc.c
 create mode 100644 drivers/mfd/mp2629.c
 create mode 100644 drivers/power/supply/mp2629_charger.c
 create mode 100644 include/linux/mfd/mp2629.h
Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
maintainer
#10 lore raw

Re: [GIT PULL] Immutable branch between MFD, IIO and Power due for the v5.8 merge window

Quoted 3 lines · On Thu, 28 May 2020 09:09:39 +0200 Sebastian Reichel…

Hi,

Thanks for taking care of it Lee, merged!

Thanks indeed.

Given timing I'll probably only get this into IIO via a rebase after rc1.

Thanks,

Jonathan

Quoted 56 lines

-- Sebastian

Quoted 52 lines · Lee Jones

Enjoy!

The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:

Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-iio-power-v5.8

for you to fetch changes up to 904ac71f4b0c1c26ec47ff597cb3d3c7d36e618d:

MAINTAINERS: Add entry for mp2629 Battery Charger driver (2020-05-26 10:42:02 +0100)

----------------------------------------------------------------
Immutable branch between MFD, IIO and Power due for the v5.8 merge window

----------------------------------------------------------------
Saravanan Sekar (6):
dt-bindings: mfd: Add document bindings for mp2629
mfd: mp2629: Add support for mps battery charger
iio: adc: mp2629: Add support for mp2629 ADC driver
power: supply: Add support for mps mp2629 battery charger
power: supply: mp2629: Add impedance compensation config
MAINTAINERS: Add entry for mp2629 Battery Charger driver

 Documentation/ABI/testing/sysfs-class-power-mp2629 |   8 +
 .../devicetree/bindings/mfd/mps,mp2629.yaml        |  62 ++
 MAINTAINERS                                        |   5 +
 drivers/iio/adc/Kconfig                            |  10 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/mp2629_adc.c                       | 208 +++++++
 drivers/mfd/Kconfig                                |   9 +
 drivers/mfd/Makefile                               |   2 +
 drivers/mfd/mp2629.c                               |  79 +++
 drivers/power/supply/Kconfig                       |  10 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/mp2629_charger.c              | 669 +++++++++++++++++++++
 include/linux/mfd/mp2629.h                         |  26 +
 13 files changed, 1090 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
 create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
 create mode 100644 drivers/iio/adc/mp2629_adc.c
 create mode 100644 drivers/mfd/mp2629.c
 create mode 100644 drivers/power/supply/mp2629_charger.c
 create mode 100644 include/linux/mfd/mp2629.h
Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog