apalis_imx6: fix video stdout in default environment
Subsystems (2)
PATCH 1/1 apalis_imx6: fix video stdout in default environment
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
--- include/configs/apalis_imx6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/apalis_imx6.h +2 -1
@@ -173,7 +173,8 @@BOOTENV \"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \"usb start ; " \ -"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ +"setenv stdout serial,vidconsole; \ + "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=enable_wait_mode=off vmalloc=400M\0" \
Signature · 1 line
2.17.1
PATCH 1/1 cm_fx6: fix video stdout in default environment
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
--- include/configs/cm_fx6.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/configs/cm_fx6.h +2 -2
@@ -49,8 +49,8 @@ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \"fdtfile=undefined\0" \"stdin=serial,usbkbd\0" \ -"stdout=serial,vga\0" \ -"stderr=serial,vga\0" \ +"stdout=serial,vidconsole\0" \ +"stderr=serial,vidconsole\0" \"panel=HDMI\0" \"autoload=no\0" \"uImage=uImage-cm-fx6\0" \
Signature · 1 line
2.17.1
PATCH 1/1 cm_fx6: fix video stdout in default environment
Quoted 5 lines · On Tue, 26 May 2020 12:03:19 +0200 Anatolij Gustschin agust at denx.de wrote:
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Nikita Kiryanov <[email protected]>
Applied to u-boot-video/master, thanks!
--
Anatolij
PATCH 1/1 colibri_imx6: fix video stdout in default environment
In reply to Anatolij GustschinAfter migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
--- include/configs/colibri_imx6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/colibri_imx6.h +2 -1
@@ -156,7 +156,8 @@BOOTENV \"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \"usb start ; " \ -"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ +"setenv stdout serial,vidconsole; \ + "setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
Signature · 1 line
2.17.1
PATCH v2 1/1 colibri_imx6: fix video stdout in default environment
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
---
Changes in v2:
- fix build error
include/configs/colibri_imx6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/colibri_imx6.h +2 -1
@@ -156,7 +156,8 @@BOOTENV \"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \"usb start ; " \ -"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ +"setenv stdout serial,vidconsole; " \ +"setenv stdin serial,usbkbd\0" \"boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
Signature · 1 line
2.17.1
PATCH v2 1/1 colibri_imx6: fix video stdout in default environment
Hi Anatolij,
Quoted 28 lines · Anatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Igor Opaniuk <[email protected]>---
Changes in v2:
- fix build errorinclude/configs/colibri_imx6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)include/configs/colibri_imx6.h +2
-2@@ -156,7 +156,8 @@BOOTENV \"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \"usb start ; " \ -"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ +"setenv stdout serial,vidconsole; " \ +"setenv stdin serial,usbkbd\0" \"boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ --
Quoted 2 lines
2.17.1
Thanks for the patch.
Signature · 8 lines
Best regards - Freundliche Gr?sse - Meilleures salutations Igor Opaniuk mailto: igor.opaniuk at gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk
PATCH v2 1/1 colibri_imx6: fix video stdout in default environment
In reply to Anatolij GustschinQuoted 5 lines · On Tue, 26 May 2020 22:54:29 +0200 Anatolij Gustschin agust at denx.de wrote:
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Igor Opaniuk <[email protected]>
Applied to u-boot-video/master, thanks!
--
Anatolij
PATCH 1/1 nitrogen6x: update video console name
In reply to Anatolij GustschinAfter migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead.
--- board/boundary/nitrogen6x/6x_upgrade.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/6x_upgrade.txt +1 -1
@@ -1,4 +1,4 @@ -setenv stdout serial,vga +setenv stdout serial,vidconsole echo "check U-Boot" ; setenv offset 0x400 if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
Signature · 1 line
2.17.1
PATCH 1/1 nitrogen6x: update video console name
Quoted 15 lines · Anatolij Gustschin
After migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Troy Kisky <[email protected]>--- board/boundary/nitrogen6x/6x_upgrade.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/boundary/nitrogen6x/6x_upgrade.txt +0
-0
board/boundary/nitrogen6x/6x_upgrade.txt line 4
Quoted 5 lines
board/boundary/nitrogen6x/6x_upgrade.txt +1
-1@@ -1,4 +1,4 @@ -setenv stdout serial,vga +setenv stdout serial,vidconsole echo "check U-Boot" ; setenv offset 0x400 if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
Thanks!
PATCH 1/1 nitrogen6x: update video console name
In reply to Anatolij GustschinQuoted 8 lines · On Tue, 26 May 2020 12:03:21 +0200 Anatolij Gustschin agust at denx.de wrote:
After migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Troy Kisky <[email protected]>--- board/boundary/nitrogen6x/6x_upgrade.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-video/next, thanks!
--
Anatolij
PATCH 1/1 video: ipuv3: remove non-DM code
In reply to Anatolij GustschinAll ipuv3 users have been converted, drop obsolete code.
--- drivers/video/imx/Kconfig | 2 +- drivers/video/imx/mxc_ipuv3_fb.c | 43 -------------------------------- 2 files changed, 1 insertion(+), 44 deletions(-)
drivers/video/imx/Kconfig +1 -1
@@ -1,7 +1,7 @@ config VIDEO_IPUV3 bool "i.MX IPUv3 Core video support" - depends on (VIDEO || DM_VIDEO) && (MX5 || MX6) + depends on DM_VIDEO && (MX5 || MX6) help This enables framebuffer driver for i.MX processors working on the IPUv3(Image Processing Unit) internal graphic processor.
drivers/video/imx/mxc_ipuv3_fb.c +0 -43
84 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v2 1/1 apalis_imx6: fix video stdout in default environment
In reply to Anatolij GustschinAfter migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
---
Changes in v2:
- fix build error
include/configs/apalis_imx6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/apalis_imx6.h +2 -1
@@ -173,7 +173,8 @@BOOTENV \"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \"usb start ; " \ -"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ +"setenv stdout serial,vidconsole; " \ +"setenv stdin serial,usbkbd\0" \"boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=enable_wait_mode=off vmalloc=400M\0" \
Signature · 1 line
2.17.1
PATCH v2 1/1 apalis_imx6: fix video stdout in default environment
Hi Anatolij,
Quoted 28 lines · Anatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Igor Opaniuk <[email protected]>---
Changes in v2:
- fix build errorinclude/configs/apalis_imx6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)include/configs/apalis_imx6.h +2
-2@@ -173,7 +173,8 @@BOOTENV \"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \"usb start ; " \ -"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ +"setenv stdout serial,vidconsole; " \ +"setenv stdin serial,usbkbd\0" \"boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=enable_wait_mode=off vmalloc=400M\0" \ --
Quoted 2 lines
2.17.1
Thanks for the patch.
Signature · 8 lines
Best regards - Freundliche Gr?sse - Meilleures salutations Igor Opaniuk mailto: igor.opaniuk at gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk
PATCH v2 1/1 apalis_imx6: fix video stdout in default environment
In reply to Anatolij GustschinQuoted 5 lines · On Tue, 26 May 2020 22:52:14 +0200 Anatolij Gustschin agust at denx.de wrote:
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.
Signed-off-by Anatolij Gustschin <[email protected]>Cc Igor Opaniuk <[email protected]>
Applied to u-boot-video/master, thanks!
--
Anatolij