Skip to contentSkip to conversation

apalis_imx6: fix video stdout in default environment

PATCH New Anatolij Gustschin 3 participants 14 messages May 26, 2020 – Jun 19, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 apalis_imx6: fix video stdout in default environment

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
 include/configs/apalis_imx6.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/apalis_imx6.h +2 -1
index 6f03058a78..0db8e74e9a 100644
@@ -173,7 +173,8 @@
 	BOOTENV \
 	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
 		"usb start ; " \
-		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+		"setenv stdout serial,vidconsole; \
+		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off vmalloc=400M\0" \
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 cm_fx6: fix video stdout in default environment

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
 include/configs/cm_fx6.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/configs/cm_fx6.h +2 -2
index 302907dcfb..35f251c15e 100644
@@ -49,8 +49,8 @@
 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 	"fdtfile=undefined\0" \
 	"stdin=serial,usbkbd\0" \
-	"stdout=serial,vga\0" \
-	"stderr=serial,vga\0" \
+	"stdout=serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0" \
 	"panel=HDMI\0" \
 	"autoload=no\0" \
 	"uImage=uImage-cm-fx6\0" \
Signature · 1 line
2.17.1
#2 lore raw

PATCH 1/1 cm_fx6: fix video stdout in default environment

Quoted 5 lines · On Tue, 26 May 2020 12:03:19 +0200 Anatolij Gustschin agust at denx.de wrote:

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

Applied to u-boot-video/master, thanks!

--
Anatolij

#3 lore raw

PATCH 1/1 colibri_imx6: fix video stdout in default environment

In reply to Anatolij Gustschin

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
 include/configs/colibri_imx6.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/colibri_imx6.h +2 -1
index 3d248ef4ef..99a601386c 100644
@@ -156,7 +156,8 @@
 	BOOTENV \
 	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
 		"usb start ; " \
-		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+		"setenv stdout serial,vidconsole; \
+		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
Signature · 1 line
2.17.1
#4 lore raw

PATCH v2 1/1 colibri_imx6: fix video stdout in default environment

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
Changes in v2:
- fix build error

 include/configs/colibri_imx6.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/colibri_imx6.h +2 -1
index 3d248ef4ef..af17a0a137 100644
@@ -156,7 +156,8 @@
 	BOOTENV \
 	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
 		"usb start ; " \
-		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+		"setenv stdout serial,vidconsole; " \
+		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
Signature · 1 line
2.17.1
#5 lore raw

PATCH v2 1/1 colibri_imx6: fix video stdout in default environment

Hi Anatolij,

Quoted 28 lines · Anatolij Gustschin

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
Changes in v2:
- fix build error

 include/configs/colibri_imx6.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/colibri_imx6.h +2 -2
index 3d248ef4ef..af17a0a137 100644
@@ -156,7 +156,8 @@
        BOOTENV \
        "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
                "usb start ; " \
-               "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+               "setenv stdout serial,vidconsole; " \
+               "setenv stdin serial,usbkbd\0" \
        "boot_file=zImage\0" \
        "console=ttymxc0\0" \
        "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
--
Quoted 2 lines

2.17.1

Thanks for the patch.

Signature · 8 lines
Best regards - Freundliche Gr?sse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
#6 lore raw

PATCH v2 1/1 colibri_imx6: fix video stdout in default environment

In reply to Anatolij Gustschin
Quoted 5 lines · On Tue, 26 May 2020 22:54:29 +0200 Anatolij Gustschin agust at denx.de wrote:

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

Applied to u-boot-video/master, thanks!

--
Anatolij

#7 lore raw

PATCH 1/1 nitrogen6x: update video console name

In reply to Anatolij Gustschin

After migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead.

---
 board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/6x_upgrade.txt +1 -1
index 1a62bbf12e..cd3c33e407 100644
@@ -1,4 +1,4 @@
-setenv stdout serial,vga
+setenv stdout serial,vidconsole
 echo "check U-Boot" ;
 setenv offset 0x400
 if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
Signature · 1 line
2.17.1
#8 lore raw

PATCH 1/1 nitrogen6x: update video console name

Quoted 15 lines · Anatolij Gustschin

After migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead.

---
 board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/6x_upgrade.txt +0 -0
index 1a62bbf12e..cd3c33e407 100644

board/boundary/nitrogen6x/6x_upgrade.txt line 4

Quoted 5 lines
board/boundary/nitrogen6x/6x_upgrade.txt +1 -1
@@ -1,4 +1,4 @@
-setenv stdout serial,vga
+setenv stdout serial,vidconsole
 echo "check U-Boot" ;
 setenv offset 0x400
 if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then

Thanks!

#9 lore raw

PATCH 1/1 nitrogen6x: update video console name

In reply to Anatolij Gustschin
Quoted 8 lines · On Tue, 26 May 2020 12:03:21 +0200 Anatolij Gustschin agust at denx.de wrote:

After migration to DM 'vga' name is not longer supported, Update the upgrade script to use 'vidconsole' instead.

---
 board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

#10 lore raw

PATCH 1/1 video: ipuv3: remove non-DM code

In reply to Anatolij Gustschin

All ipuv3 users have been converted, drop obsolete code.

---
 drivers/video/imx/Kconfig        |  2 +-
 drivers/video/imx/mxc_ipuv3_fb.c | 43 --------------------------------
 2 files changed, 1 insertion(+), 44 deletions(-)
drivers/video/imx/Kconfig +1 -1
index c33620e075..78eb0f29fb 100644
@@ -1,7 +1,7 @@
 
 config VIDEO_IPUV3
 	bool "i.MX IPUv3 Core video support"
-	depends on (VIDEO || DM_VIDEO) && (MX5 || MX6)
+	depends on DM_VIDEO && (MX5 || MX6)
 	help
 	  This enables framebuffer driver for i.MX processors working
 	  on the IPUv3(Image Processing Unit) internal graphic processor.
drivers/video/imx/mxc_ipuv3_fb.c +0 -43

84 lines not on this page · raw message

Signature · 1 line
2.17.1
#11 lore raw

PATCH v2 1/1 apalis_imx6: fix video stdout in default environment

In reply to Anatolij Gustschin

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
Changes in v2:
- fix build error

 include/configs/apalis_imx6.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/apalis_imx6.h +2 -1
index 6f03058a78..c6c2f46a17 100644
@@ -173,7 +173,8 @@
 	BOOTENV \
 	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
 		"usb start ; " \
-		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+		"setenv stdout serial,vidconsole; " \
+		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off vmalloc=400M\0" \
Signature · 1 line
2.17.1
#12 lore raw

PATCH v2 1/1 apalis_imx6: fix video stdout in default environment

Hi Anatolij,

Quoted 28 lines · Anatolij Gustschin

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

---
Changes in v2:
- fix build error

 include/configs/apalis_imx6.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/apalis_imx6.h +2 -2
index 6f03058a78..c6c2f46a17 100644
@@ -173,7 +173,8 @@
        BOOTENV \
        "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
                "usb start ; " \
-               "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+               "setenv stdout serial,vidconsole; " \
+               "setenv stdin serial,usbkbd\0" \
        "boot_file=zImage\0" \
        "console=ttymxc0\0" \
        "defargs=enable_wait_mode=off vmalloc=400M\0" \
--
Quoted 2 lines

2.17.1

Thanks for the patch.

Signature · 8 lines
Best regards - Freundliche Gr?sse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
#13 lore raw

PATCH v2 1/1 apalis_imx6: fix video stdout in default environment

In reply to Anatolij Gustschin
Quoted 5 lines · On Tue, 26 May 2020 22:52:14 +0200 Anatolij Gustschin agust at denx.de wrote:

After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment.

Applied to u-boot-video/master, thanks!

--
Anatolij