4.4.225-rc1 review
Subsystems (3)
Greg Kroah-Hartman
maintainercover 4.4.225-rc1 review
This is the start of the stable review cycle for the 4.4.225 release. There are 65 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 28 May 2020 18:36:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.225-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.225-rc1
R. Parameswaran <[email protected]>
l2tp: device MTU setup, tunnel socket needs a lock
Christophe JAILLET <[email protected]>
iio: sca3000: Remove an erroneous 'get_device()'
Alexander Usyskin <[email protected]>
mei: release me_cl object reference
Dragos Bogdan <[email protected]>
staging: iio: ad2s1210: Fix SPI reading
Bob Peterson <[email protected]>
Revert "gfs2: Don't demote a glock until its revokes are written"
Guillaume Nault <[email protected]>
l2tp: initialise PPP sessions before registering them
Guillaume Nault <[email protected]>
l2tp: protect sock pointer of struct pppol2tp_session with RCU
Guillaume Nault <[email protected]>
l2tp: initialise l2tp_eth sessions before registering them
Guillaume Nault <[email protected]>
l2tp: don't register sessions in l2tp_session_create()
Guillaume Nault <[email protected]>
l2tp: fix l2tp_eth module loading
Guillaume Nault <[email protected]>
l2tp: pass tunnel pointer to ->session_create()
Guillaume Nault <[email protected]>
l2tp: prevent creation of sessions on terminated tunnels
Guillaume Nault <[email protected]>
l2tp: hold tunnel used while creating sessions with netlink
Guillaume Nault <[email protected]>
l2tp: hold tunnel while handling genl TUNNEL_GET commands
Guillaume Nault <[email protected]>
l2tp: hold tunnel while handling genl tunnel updates
Guillaume Nault <[email protected]>
l2tp: hold tunnel while processing genl delete command
Guillaume Nault <[email protected]>
l2tp: hold tunnel while looking up sessions in l2tp_netlink
Guillaume Nault <[email protected]>
l2tp: initialise session's refcount before making it reachable
Guillaume Nault <[email protected]>
l2tp: define parameters of l2tp_tunnel_find*() as "const"
Guillaume Nault <[email protected]>
l2tp: define parameters of l2tp_session_get*() as "const"
Guillaume Nault <[email protected]>
l2tp: remove l2tp_session_find()
Guillaume Nault <[email protected]>
l2tp: remove useless duplicate session detection in l2tp_netlink
R. Parameswaran <[email protected]>
L2TP:Adjust intf MTU, add underlay L3, L2 hdrs.
R. Parameswaran <[email protected]>
New kernel function to get IP overhead on a socket.
Asbjørn Sloth Tønnesen <[email protected]>
net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*
Asbjørn Sloth Tønnesen <[email protected]>
net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*
Asbjørn Sloth Tønnesen <[email protected]>
net: l2tp: export debug flags to UAPI
Guillaume Nault <[email protected]>
l2tp: don't use l2tp_tunnel_find() in l2tp_ip and l2tp_ip6
Guillaume Nault <[email protected]>
l2tp: take a reference on sessions used in genetlink handlers
Guillaume Nault <[email protected]>
l2tp: hold session while sending creation notifications
Guillaume Nault <[email protected]>
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind()
Guillaume Nault <[email protected]>
l2tp: lock socket before checking flags in connect()
Vishal Verma <[email protected]>
libnvdimm/btt: Remove unnecessary code in btt_freelist_init
Colin Ian King <[email protected]>
platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer
Theodore Ts'o <[email protected]>
ext4: lock the xattr block before checksuming it
Brent Lu <[email protected]>
ALSA: pcm: fix incorrect hw_base increase
Daniel Jordan <[email protected]>
padata: purge get_cpu and reorder_via_wq from padata_do_serial
Daniel Jordan <[email protected]>
padata: initialize pd->cpu with effective cpumask
Herbert Xu <[email protected]>
padata: Replace delayed timer with immediate workqueue in padata_reorder
Peter Zijlstra <[email protected]>
sched/fair, cpumask: Export for_each_cpu_wrap()
Mathias Krause <[email protected]>
padata: set cpu_index of unused CPUs to -1
Kevin Hao <[email protected]>
i2c: dev: Fix the race between the release of i2c_dev and cdev
viresh kumar <[email protected]>
i2c-dev: don't get i2c adapter via i2c_dev
Dan Carpenter <[email protected]>
i2c: dev: use after free in detach
Wolfram Sang <[email protected]>
i2c: dev: don't start function name with 'return'
Erico Nunes <[email protected]>
i2c: dev: switch from register_chrdev to cdev API
Shuah Khan <[email protected]>
media: fix media devnode ioctl/syscall and unregister race
Shuah Khan <[email protected]>
media: fix use-after-free in cdev_put() when app exits after driver unbind
Mauro Carvalho Chehab <[email protected]>
media-device: dynamically allocate struct media_devnode
Mauro Carvalho Chehab <[email protected]>
media-devnode: fix namespace mess
Max Kellermann <[email protected]>
media-devnode: add missing mutex lock in error handler
Max Kellermann <[email protected]>
drivers/media/media-devnode: clear private_data before put_device()
Shuah Khan <[email protected]>
media: Fix media_open() to clear filp->private_data in error leg
Thomas Gleixner <[email protected]>
ARM: futex: Address build warning
Hans de Goede <[email protected]>
platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA
Alan Stern <[email protected]>
USB: core: Fix misleading driver bug report
Wu Bo <[email protected]>
ceph: fix double unlock in handle_cap_export()
Sebastian Reichel <[email protected]>
HID: multitouch: add eGalaxTouch P80H84 support
Al Viro <[email protected]>
fix multiplication overflow in copy_fdtable()
Roberto Sassu <[email protected]>
evm: Check also if *tfm is an error pointer in init_desc()
Mathias Krause <[email protected]>
padata: ensure padata_do_serial() runs on the correct CPU
Mathias Krause <[email protected]>
padata: ensure the reorder timer callback runs on the correct CPU
Jason A. Donenfeld <[email protected]>
padata: get_next is never NULL
Tobias Klauser <[email protected]>
padata: Remove unused but set variables
Cao jin <[email protected]>
igb: use igb_adapter->io_addr instead of e1000_hw->hw_addr
-------------
Diffstat:
Documentation/networking/l2tp.txt | 8 +- Makefile | 4 +- arch/arm/include/asm/futex.h | 9 +- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-multitouch.c | 3 + drivers/i2c/i2c-dev.c | 60 +++--- drivers/media/media-device.c | 43 +++-- drivers/media/media-devnode.c | 168 +++++++++------- drivers/media/usb/uvc/uvc_driver.c | 2 +- drivers/misc/mei/client.c | 2 + drivers/net/ethernet/intel/igb/igb_main.c | 4 +- drivers/nvdimm/btt.c | 8 +- drivers/platform/x86/alienware-wmi.c | 17 +- drivers/platform/x86/asus-nb-wmi.c | 24 +++ drivers/staging/iio/accel/sca3000_ring.c | 2 +- drivers/staging/iio/resolver/ad2s1210.c | 17 +- drivers/usb/core/message.c | 4 +- fs/ceph/caps.c | 1 + fs/ext4/xattr.c | 66 ++++--- fs/file.c | 2 +- fs/gfs2/glock.c | 3 - include/linux/cpumask.h | 17 ++ include/linux/net.h | 3 + include/linux/padata.h | 13 +- include/media/media-device.h | 5 +- include/media/media-devnode.h | 32 +++- include/net/ipv6.h | 2 + include/uapi/linux/if_pppol2tp.h | 13 +- include/uapi/linux/l2tp.h | 17 +- kernel/padata.c | 88 ++++----- lib/cpumask.c | 32 ++++ net/ipv6/datagram.c | 4 +- net/l2tp/l2tp_core.c | 181 ++++++----------- net/l2tp/l2tp_core.h | 47 +++-- net/l2tp/l2tp_eth.c | 216 +++++++++++++-------- net/l2tp/l2tp_ip.c | 68 ++++--- net/l2tp/l2tp_ip6.c | 82 ++++---- net/l2tp/l2tp_netlink.c | 124 +++++++----- net/l2tp/l2tp_ppp.c | 309 ++++++++++++++++++------------ net/socket.c | 46 +++++ security/integrity/evm/evm_crypto.c | 2 +- sound/core/pcm_lib.c | 1 + 42 files changed, 1014 insertions(+), 736 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/65 igb: use igb_adapter->io_addr instead of e1000_hw->hw_addr
From: Cao jin <[email protected]>
commit 629823b872402451b42462414da08dddd0e2c93d upstream.
When running as guest, under certain condition, it will oops as following. writel() in igb_configure_tx_ring() results in oops, because hw->hw_addr is NULL. While other register access won't oops kernel because they use wr32/rd32 which have a defense against NULL pointer.
[ 141.225449] pcieport 0000:00:1c.0: AER: Multiple Uncorrected (Fatal)
error received: id=0101
[ 141.225523] igb 0000:01:00.1: PCIe Bus Error:
severity=Uncorrected (Fatal), type=Unaccessible,
id=0101(Unregistered Agent ID)
[ 141.299442] igb 0000:01:00.1: broadcast error_detected message
[ 141.300539] igb 0000:01:00.0 enp1s0f0: PCIe link lost, device now
detached
[ 141.351019] igb 0000:01:00.1 enp1s0f1: PCIe link lost, device now
detached
[ 143.465904] pcieport 0000:00:1c.0: Root Port link has been reset
[ 143.465994] igb 0000:01:00.1: broadcast slot_reset message
[ 143.466039] igb 0000:01:00.0: enabling device (0000 -> 0002)
[ 144.389078] igb 0000:01:00.1: enabling device (0000 -> 0002)
[ 145.312078] igb 0000:01:00.1: broadcast resume message
[ 145.322211] BUG: unable to handle kernel paging request at
0000000000003818
[ 145.361275] IP: [<ffffffffa02fd38d>]
igb_configure_tx_ring+0x14d/0x280 [igb]
[ 145.400048] PGD 0
[ 145.438007] Oops: 0002 [#1] SMPA similar issue & solution could be found at:
http://patchwork.ozlabs.org/patch/689592/
--- drivers/net/ethernet/intel/igb/igb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/igb/igb_main.c +2 -2
@@ -3296,7 +3296,7 @@ void igb_configure_tx_ring(struct igb_ad tdba & 0x00000000ffffffffULL);wr32 (E1000_TDBAH (reg_idx), tdba >>32 ); - ring->tail = hw->hw_addr +E1000_TDT (reg_idx); + ring->tail = adapter->io_addr +E1000_TDT (reg_idx);wr32 (E1000_TDH (reg_idx),0 );writel (0 , ring->tail);
@@ -3652,7 +3652,7 @@ void igb_configure_rx_ring(struct igb_ad ring->count * sizeof(union e1000_adv_rx_desc));/* initialize head and tail */ - ring->tail = hw->hw_addr +E1000_RDT (reg_idx); + ring->tail = adapter->io_addr +E1000_RDT (reg_idx);wr32 (E1000_RDH (reg_idx),0 );writel (0 , ring->tail);
Greg Kroah-Hartman
maintainerPATCH 2/65 padata: Remove unused but set variables
In reply to Greg Kroah-HartmanFrom: Tobias Klauser <[email protected]>
commit 119a0798dc42ed4c4f96d39b8b676efcea73aec6 upstream.
Remove the unused but set variable pinst in padata_parallel_worker to fix the following warning when building with 'W=1':
kernel/padata.c: In function ‘padata_parallel_worker’:
kernel/padata.c:68:26: warning: variable ‘pinst’ set but not used [-Wunused-but-set-variable]
Also remove the now unused variable pd which is only used to set pinst.
--- kernel/padata.c | 4 ---- 1 file changed, 4 deletions(-)
kernel/padata.c +0 -4
@@ -65,15 +65,11 @@ static int padata_cpu_hash(struct parallstatic void padata_parallel_worker (struct work_struct *parallel_work) {struct padata_parallel_queue *pqueue; -struct parallel_data *pd; -struct padata_instance *pinst;LIST_HEAD (local_list);local_bh_disable (); pqueue =container_of (parallel_work, struct padata_parallel_queue, work); - pd = pqueue->pd; - pinst = pd->pinst;spin_lock (&pqueue->parallel.lock);list_replace_init (&pqueue->parallel.list, &local_list);
Greg Kroah-Hartman
maintainerPATCH 3/65 padata: get_next is never NULL
In reply to Greg Kroah-HartmanFrom: Jason A. Donenfeld <[email protected]>
commit 69b348449bda0f9588737539cfe135774c9939a7 upstream.
Per Dan's static checker warning, the code that returns NULL was removed in 2010, so this patch updates the comments and fixes the code assumptions.
--- kernel/padata.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
kernel/padata.c +4 -9
@@ -155,8 +155,6 @@ EXPORT_SYMBOL(padata_do_parallel);* A pointer to the control struct of the next object that needs * serialization, if present in one of the percpu reorder queues. * -* NULL, if all percpu reorder queues are empty. -* * -EINPROGRESS, if the next object that needs serialization will * be parallel processed by another cpu and is not yet present in * the cpu's reorder queue.
@@ -183,8 +181,6 @@ static struct padata_priv *padata_get_ne cpu =padata_index_to_cpu (pd, next_index); next_queue =per_cpu_ptr (pd->pqueue, cpu); - padata =NULL ; - reorder = &next_queue->reorder;spin_lock (&reorder->lock);
@@ -236,12 +232,11 @@ static void padata_reorder(struct parall padata =padata_get_next (pd);/* -* All reorder queues are empty, or the next object that needs -* serialization is parallel processed by another cpu and is -* still on it's way to the cpu's reorder queue, nothing to -* do for now. +* If the next object that needs serialization is parallel +* processed by another cpu and is still on it's way to the +* cpu's reorder queue, nothing to do for now. */ -if (!padata ||PTR_ERR (padata) == -EINPROGRESS ) +if (PTR_ERR (padata) == -EINPROGRESS )break ;/*
Greg Kroah-Hartman
maintainerPATCH 4/65 padata: ensure the reorder timer callback runs on the correct CPU
In reply to Greg Kroah-HartmanFrom: Mathias Krause <[email protected]>
commit cf5868c8a22dc2854b96e9569064bb92365549ca upstream.
The reorder timer function runs on the CPU where the timer interrupt was handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask set.
Ensure the padata_reorder() callback runs on the correct CPU, which is one in the 'pcpu' CPU mask set and, preferrably, the next expected one. Do so by comparing the current CPU with the expected target CPU. If they match, call padata_reorder() right away. If they differ, schedule a work item on the target CPU that does the padata_reorder() call for us.
--- include/linux/padata.h | 2 ++ kernel/padata.c | 43 ++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-)
include/linux/padata.h +2 -0
@@ -85,6 +85,7 @@ struct padata_serial_queue {* @swork: work struct for serialization. * @pd: Backpointer to the internal control structure. * @work: work struct for parallelization. +* @reorder_work: work struct for reordering. * @num_obj: Number of objects that are processed by this cpu. * @cpu_index: Index of the cpu. */
@@ -93,6 +94,7 @@ struct padata_parallel_queue {struct padata_list reorder;struct parallel_data *pd;struct work_struct work; +struct work_struct reorder_work;atomic_t num_obj;int cpu_index; };
kernel/padata.c +42 -1
59 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 5/65 padata: ensure padata_do_serial() runs on the correct CPU
In reply to Greg Kroah-HartmanFrom: Mathias Krause <[email protected]>
commit 350ef88e7e922354f82a931897ad4a4ce6c686ff upstream.
If the algorithm we're parallelizing is asynchronous we might change CPUs between padata_do_parallel() and padata_do_serial(). However, we don't expect this to happen as we need to enqueue the padata object into the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel queue.
Ensure we're not switching CPUs for a given padata object by tracking the CPU within the padata object. If the serial callback gets called on the wrong CPU, defer invoking padata_reorder() via a kernel worker on the CPU we're expected to run on.
--- include/linux/padata.h | 2 ++ kernel/padata.c | 20 +++++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-)
include/linux/padata.h +2 -0
@@ -37,6 +37,7 @@* @list: List entry, to attach to the padata lists. * @pd: Pointer to the internal control structure. * @cb_cpu: Callback cpu for serializatioon. +* @cpu: Cpu for parallelization. * @seq_nr: Sequence number of the parallelized data object. * @info: Used to pass information from the parallel to the serial function. * @parallel: Parallel execution function.
@@ -46,6 +47,7 @@ struct padata_priv {struct list_head list;struct parallel_data *pd;int cb_cpu; +int cpu;int info;void (*parallel)(struct padata_priv *padata);void (*serial)(struct padata_priv *padata);
kernel/padata.c +19 -1
@@ -132,6 +132,7 @@ int padata_do_parallel(struct padata_ins padata->cb_cpu = cb_cpu; target_cpu =padata_cpu_hash (pd); + padata->cpu = target_cpu; queue =per_cpu_ptr (pd->pqueue, target_cpu);spin_lock (&queue->parallel.lock);
@@ -375,10 +376,21 @@ void padata_do_serial(struct padata_privint cpu;struct padata_parallel_queue *pqueue;struct parallel_data *pd; +int reorder_via_wq =0 ; pd = padata->pd; cpu =get_cpu (); + +/* We need to run on the same CPU padata_do_parallel(.., padata, ..) +* was called on -- or, at least, enqueue the padata object into the +* correct per-cpu queue. +*/ +if (cpu != padata->cpu) { + reorder_via_wq =1 ; + cpu = padata->cpu; + } + pqueue =per_cpu_ptr (pd->pqueue, cpu);spin_lock (&pqueue->reorder.lock);
@@ -395,7 +407,13 @@ void padata_do_serial(struct padata_privput_cpu (); -padata_reorder (pd); +/* If we're running on the wrong CPU, call padata_reorder() via a +* kernel worker. +*/ +if (reorder_via_wq) +queue_work_on (cpu, pd->pinst->wq, &pqueue->reorder_work); +else +padata_reorder (pd); }EXPORT_SYMBOL (padata_do_serial);
Greg Kroah-Hartman
maintainerPATCH 6/65 evm: Check also if *tfm is an error pointer in init_desc()
In reply to Greg Kroah-HartmanFrom: Roberto Sassu <[email protected]>
[ Upstream commit 53de3b080d5eae31d0de219617155dcc34e7d698 ]
This patch avoids a kernel panic due to accessing an error pointer set by crypto_alloc_shash(). It occurs especially when there are many files that require an unsupported algorithm, as it would increase the likelihood of the following race condition:
Task A: *tfm = crypto_alloc_shash() <= error pointer Task B: if (*tfm == NULL) <= *tfm is not NULL, use it Task B: rc = crypto_shash_init(desc) <= panic Task A: *tfm = NULL
This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new crypto context must be created.
--- security/integrity/evm/evm_crypto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
security/integrity/evm/evm_crypto.c +1 -1
@@ -47,7 +47,7 @@ static struct shash_desc *init_desc(char type) algo = evm_hash; } -if (*tfm ==NULL ) { +if (IS_ERR_OR_NULL (*tfm)) {mutex_lock (&mutex);if (*tfm) goto out;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 7/65 fix multiplication overflow in copy_fdtable()
In reply to Greg Kroah-HartmanFrom: Al Viro <[email protected]>
[ Upstream commit 4e89b7210403fa4a8acafe7c602b6212b7af6c3b ]
cpy and set really should be size_t; we won't get an overflow on that, since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *), so nr that would've managed to overflow size_t on that multiplication won't get anywhere near copy_fdtable() - we'll fail with EMFILE before that.
--- fs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/file.c +1 -1
@@ -88,7 +88,7 @@ static void copy_fd_bitmaps(struct fdtable *nfdt, struct fdtable *ofdt,*/ static void copy_fdtable (struct fdtable *nfdt,struct fdtable *ofdt) { -unsigned int cpy, set; +size_t cpy, set;BUG_ON (nfdt->max_fds < ofdt->max_fds);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 8/65 HID: multitouch: add eGalaxTouch P80H84 support
In reply to Greg Kroah-HartmanFrom: Sebastian Reichel <[email protected]>
[ Upstream commit f9e82295eec141a0569649d400d249333d74aa91 ]
Add support for P80H84 touchscreen from eGalaxy:
idVendor 0x0eef D-WAV Scientific Co., Ltd
idProduct 0xc002
iManufacturer 1 eGalax Inc.
iProduct 2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146
--- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-multitouch.c | 3 +++ 2 files changed, 4 insertions(+)
drivers/hid/hid-ids.h +1 -0
@@ -319,6 +319,7 @@#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349 0x7349#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7 0x73f7#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001 +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_C002 0xc002#define USB_VENDOR_ID_ELAN 0x04f3
drivers/hid/hid-multitouch.c +3 -0
@@ -1300,6 +1300,9 @@ static const struct hid_device_id mt_devices[] = { { .driver_data = MT_CLS_EGALAX_SERIAL,MT_USB_DEVICE (USB_VENDOR_ID_DWAV , USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) }, + { .driver_data = MT_CLS_EGALAX, +MT_USB_DEVICE (USB_VENDOR_ID_DWAV , + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_C002) }, /* Elitegroup panel */ { .driver_data = MT_CLS_SERIAL,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 9/65 ceph: fix double unlock in handle_cap_export()
In reply to Greg Kroah-HartmanFrom: Wu Bo <[email protected]>
[ Upstream commit 4d8e28ff3106b093d98bfd2eceb9b430c70a8758 ]
If the ceph_mdsc_open_export_target_session() return fails, it will do a "goto retry", but the session mutex has already been unlocked. Re-lock the mutex in that case to ensure that we don't unlock it twice.
--- fs/ceph/caps.c | 1 + 1 file changed, 1 insertion(+)
fs/ceph/caps.c +1 -0
@@ -3293,6 +3293,7 @@ retry:WARN_ON (1 ); tsession =NULL ; target =-1 ; +mutex_lock (&session->s_mutex); } goto retry;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 10/65 USB: core: Fix misleading driver bug report
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
[ Upstream commit ac854131d9844f79e2fdcef67a7707227538d78a ]
The syzbot fuzzer found a race between URB submission to endpoint 0 and device reset. Namely, during the reset we call usb_ep0_reinit() because the characteristics of ep0 may have changed (if the reset follows a firmware update, for example). While usb_ep0_reinit() is running there is a brief period during which the pointers stored in udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is submitted to ep0 during that period, usb_urb_ep_type_check() will report it as a driver bug. In the absence of those pointers, the routine thinks that the endpoint doesn't exist. The log message looks like this:
------------[ cut here ]------------ usb 2-1: BOGUS urb xfer, pipe 2 != type 2 WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478 usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a questionable thing to do, it shouldn't count as a driver bug as severe as submitting an URB for an endpoint that doesn't exist. Indeed, endpoint 0 always exists, even while the device is in its unconfigured state.
To prevent these misleading driver bug reports, this patch updates usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[] pointers when the endpoint being disabled is ep0. There's no danger of leaving a stale pointer in place, because the usb_host_endpoint structure being pointed to is stored permanently in udev->ep0; it doesn't get deallocated until the entire usb_device structure does.
--- drivers/usb/core/message.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/core/message.c +2 -2
@@ -1080,11 +1080,11 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,if (usb_endpoint_out (epaddr)) { ep = dev->ep_out[epnum]; -if (reset_hardware) +if (reset_hardware && epnum !=0 ) dev->ep_out[epnum] =NULL ; }else { ep = dev->ep_in[epnum]; -if (reset_hardware) +if (reset_hardware && epnum !=0 ) dev->ep_in[epnum] =NULL ; }if (ep) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 11/65 platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
[ Upstream commit 3bd12da7f50b8bc191fcb3bab1f55c582234df59 ]
asus-nb-wmi does not add any extra functionality on these Asus Transformer books. They have detachable keyboards, so the hotkeys are send through a HID device (and handled by the hid-asus driver) and also the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface on these devices actually has a negative side-effect. For some reason the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED, high and there is no (WMI or other) interface to drive this low again causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the asus-nb-wmi and adds these Transformer books to this list. This fixes the webcam LED being permanently on under Linux.
--- drivers/platform/x86/asus-nb-wmi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
drivers/platform/x86/asus-nb-wmi.c +24 -0
@@ -551,9 +551,33 @@ static struct asus_wmi_driver asus_nb_wmi_driver = { .detect_quirks = asus_nb_wmi_quirks, }; +static const struct dmi_system_id asus_nb_wmi_blacklist[]__initconst = { + { +/* +* asus-nb-wm adds no functionality. The T100TA has a detachable +* USB kbd, so no hotkeys and it has no WMI rfkill; and loading +* asus-nb-wm causes the camera LED to turn and _stay_ on. +*/ + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"ASUSTeK COMPUTER INC." ), +DMI_EXACT_MATCH (DMI_PRODUCT_NAME ,"T100TA" ), + }, + }, + { +/* The Asus T200TA has the same issue as the T100TA */ + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"ASUSTeK COMPUTER INC." ), +DMI_EXACT_MATCH (DMI_PRODUCT_NAME ,"T200TA" ), + }, + }, + {}/* Terminating entry */ +};static int __init asus_nb_wmi_init (void ) { +if (dmi_check_system (asus_nb_wmi_blacklist)) +return -ENODEV ; +return asus_wmi_register_driver (&asus_nb_wmi_driver); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 12/65 ARM: futex: Address build warning
In reply to Greg Kroah-HartmanFrom: Thomas Gleixner <[email protected]>
[ Upstream commit 8101b5a1531f3390b3a69fa7934c70a8fd6566ad ]
Stephen reported the following build warning on a ARM multi_v7_defconfig build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser() calling conventions change").
While that change should not make any difference it confuses GCC which fails to work out that oldval is not referenced when the return value is not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the early return, the issue is with the assembly macros. GCC fails to detect that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT which makes oldval uninteresting. The store to the callsite supplied oldval pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it removes the conditional from the fastpath. In the error case the stored value is uninteresting and the extra store does not matter at all.
--- arch/arm/include/asm/futex.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
arch/arm/include/asm/futex.h +7 -2
@@ -162,8 +162,13 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)preempt_enable ();#endif -if (!ret) - *oval = oldval; +/* +* Store unconditionally. If ret != 0 the extra store is the least +* of the worries but GCC cannot figure out that __futex_atomic_op() +* is either setting ret to -EFAULT or storing the old value in +* oldval which results in a uninitialized warning at the call site. +*/ + *oval = oldval;return ret; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 13/65 media: Fix media_open() to clear filp->private_data in error leg
In reply to Greg Kroah-HartmanFrom: Shuah Khan <[email protected]>
commit d40ec6fdb0b03b7be4c7923a3da0e46bf943740a upstream.
Fix media_open() to clear filp->private_data when file open fails.
--- drivers/media/media-devnode.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/media-devnode.c +1 -0
@@ -181,6 +181,7 @@ static int media_open(struct inode *inode, struct file *filp) ret = mdev->fops->open (filp);if (ret) {put_device (&mdev->dev); + filp->private_data =NULL ;return ret; } }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 14/65 drivers/media/media-devnode: clear private_data before put_device()
In reply to Greg Kroah-HartmanFrom: Max Kellermann <[email protected]>
commit bf244f665d76d20312c80524689b32a752888838 upstream.
Callbacks invoked from put_device() may free the struct media_devnode pointer, so any cleanup needs to be done before put_device().
--- drivers/media/media-devnode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/media-devnode.c +2 -1
@@ -197,10 +197,11 @@ static int media_release(struct inode *inode, struct file *filp)if (mdev->fops->release) mdev->fops->release (filp); + filp->private_data =NULL ; +/* decrease the refcount unconditionally since the release() return value is ignored. */ put_device (&mdev->dev); - filp->private_data =NULL ;return 0 ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 15/65 media-devnode: add missing mutex lock in error handler
In reply to Greg Kroah-HartmanFrom: Max Kellermann <[email protected]>
commit 88336e174645948da269e1812f138f727cd2896b upstream.
We should protect the device unregister patch too, at the error condition.
--- drivers/media/media-devnode.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/media/media-devnode.c +3 -0
@@ -282,8 +282,11 @@ int __must_check media_devnode_register(struct media_devnode *mdev,return 0 ; error: +mutex_lock (&media_devnode_lock);cdev_del (&mdev->cdev);clear_bit (mdev->minor, media_devnode_nums); +mutex_unlock (&media_devnode_lock); +return ret; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 16/65 media-devnode: fix namespace mess
In reply to Greg Kroah-HartmanFrom: Mauro Carvalho Chehab <[email protected]>
commit 163f1e93e995048b894c5fc86a6034d16beed740 upstream.
Along all media controller code, "mdev" is used to represent a pointer to struct media_device, and "devnode" for a pointer to struct media_devnode.
However, inside media-devnode.[ch], "mdev" is used to represent a pointer to struct media_devnode.
This is very confusing and may lead to development errors.
So, let's change all occurrences at media-devnode.[ch] to also use "devnode" for such pointers.
This patch doesn't make any functional changes.
--- drivers/media/media-devnode.c | 114 +++++++++++++++++----------------- include/media/media-devnode.h | 10 +-- 2 files changed, 62 insertions(+), 62 deletions(-)
drivers/media/media-devnode.c +57 -57
@@ -59,21 +59,21 @@ static DECLARE_BITMAP(media_devnode_nums, MEDIA_NUM_DEVICES);/* Called when the last user of the media device exits. */ static void media_devnode_release (struct device *cd) { -struct media_devnode *mdev =to_media_devnode (cd); +struct media_devnode *devnode =to_media_devnode (cd);mutex_lock (&media_devnode_lock);/* Delete the cdev on this minor as well */ -cdev_del (&mdev->cdev); +cdev_del (&devnode->cdev);/* Mark device node number as free */ -clear_bit (mdev->minor, media_devnode_nums); +clear_bit (devnode->minor, media_devnode_nums);mutex_unlock (&media_devnode_lock);/* Release media_devnode and perform other cleanups as needed. */ -if (mdev->release) - mdev->release (mdev); +if (devnode->release) + devnode->release (devnode); }static struct bus_type media_bus_type = {
@@ -83,37 +83,37 @@ static struct bus_type media_bus_type = {static ssize_t media_read (struct file *filp,char __user *buf,size_t sz,loff_t *off) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp); -if (!mdev->fops->read) +if (!devnode->fops->read)return -EINVAL ; -if (!media_devnode_is_registered (mdev)) +if (!media_devnode_is_registered (devnode))return -EIO ; -return mdev->fops->read (filp, buf, sz, off); +return devnode->fops->read (filp, buf, sz, off); }static ssize_t media_write (struct file *filp,const char __user *buf,size_t sz,loff_t *off) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp); -if (!mdev->fops->write) +if (!devnode->fops->write)return -EINVAL ; -if (!media_devnode_is_registered (mdev)) +if (!media_devnode_is_registered (devnode))return -EIO ; -return mdev->fops->write (filp, buf, sz, off); +return devnode->fops->write (filp, buf, sz, off); }static unsigned int media_poll (struct file *filp,struct poll_table_struct *poll) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp); -if (!media_devnode_is_registered (mdev)) +if (!media_devnode_is_registered (devnode))return POLLERR |POLLHUP ; -if (!mdev->fops->poll) +if (!devnode->fops->poll)return DEFAULT_POLLMASK ; -return mdev->fops->poll (filp, poll); +return devnode->fops->poll (filp, poll); } static long
@@ -121,12 +121,12 @@ __media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg,long (*ioctl_func)(struct file *filp,unsigned int cmd, unsigned long arg)) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp);if (!ioctl_func)return -ENOTTY ; -if (!media_devnode_is_registered (mdev)) +if (!media_devnode_is_registered (devnode))return -EIO ;return ioctl_func (filp, cmd, arg);
@@ -134,9 +134,9 @@ __media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg,static long media_ioctl (struct file *filp,unsigned int cmd,unsigned long arg) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp); -return __media_ioctl (filp, cmd, arg, mdev->fops->ioctl); +return __media_ioctl (filp, cmd, arg, devnode->fops->ioctl); }#ifdef CONFIG_COMPAT
@@ -144,9 +144,9 @@ static long media_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)static long media_compat_ioctl (struct file *filp,unsigned int cmd,unsigned long arg) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp); -return __media_ioctl (filp, cmd, arg, mdev->fops->compat_ioctl); +return __media_ioctl (filp, cmd, arg, devnode->fops->compat_ioctl); }#endif /* CONFIG_COMPAT */
@@ -154,7 +154,7 @@ static long media_compat_ioctl(struct file *filp, unsigned int cmd,/* Override for the open function */ static int media_open (struct inode *inode,struct file *filp) { -struct media_devnode *mdev; +struct media_devnode *devnode;int ret;/* Check if the media device is available. This needs to be done with
@@ -164,23 +164,23 @@ static int media_open(struct inode *inode, struct file *filp)* a crash. */ mutex_lock (&media_devnode_lock); - mdev = container_of(inode->i_cdev, struct media_devnode, cdev); + devnode = container_of(inode->i_cdev, struct media_devnode, cdev);/* return ENXIO if the media device has been removed already or if it is not registered anymore. */ -if (!media_devnode_is_registered (mdev)) { +if (!media_devnode_is_registered (devnode)) {mutex_unlock (&media_devnode_lock);return -ENXIO ; }/* and increase the device refcount */ -get_device (&mdev->dev); +get_device (&devnode->dev);mutex_unlock (&media_devnode_lock); - filp->private_data = mdev; + filp->private_data = devnode; -if (mdev->fops->open) { - ret = mdev->fops->open (filp); +if (devnode->fops->open) { + ret = devnode->fops->open (filp);if (ret) { -put_device (&mdev->dev); +put_device (&devnode->dev); filp->private_data =NULL ;return ret; }
@@ -192,16 +192,16 @@ static int media_open(struct inode *inode, struct file *filp)/* Override for the release function */ static int media_release (struct inode *inode,struct file *filp) { -struct media_devnode *mdev =media_devnode_data (filp); +struct media_devnode *devnode =media_devnode_data (filp); -if (mdev->fops->release) - mdev->fops->release (filp); +if (devnode->fops->release) + devnode->fops->release (filp); filp->private_data =NULL ;/* decrease the refcount unconditionally since the release() return value is ignored. */ -put_device (&mdev->dev); +put_device (&devnode->dev);return 0 ; }
@@ -221,7 +221,7 @@ static const struct file_operations media_devnode_fops = {/** * media_devnode_register - register a media device node -* @mdev: media device node structure we want to register +* @devnode: media device node structure we want to register * * The registration code assigns minor numbers and registers the new device node * with the kernel. An error is returned if no free minor number can be found,
@@ -233,7 +233,7 @@ static const struct file_operations media_devnode_fops = {* the media_devnode structure is *not* called, so the caller is responsible for * freeing any data. */ -int __must_check media_devnode_register (struct media_devnode *mdev, +int __must_check media_devnode_register (struct media_devnode *devnode,struct module *owner) {int minor;
@@ -251,40 +251,40 @@ int __must_check media_devnode_register(struct media_devnode *mdev,set_bit (minor, media_devnode_nums);mutex_unlock (&media_devnode_lock); - mdev->minor = minor; + devnode->minor = minor;/* Part 2: Initialize and register the character device */ -cdev_init (&mdev->cdev, &media_devnode_fops); - mdev->cdev.owner = owner; +cdev_init (&devnode->cdev, &media_devnode_fops); + devnode->cdev.owner = owner; - ret =cdev_add (&mdev->cdev,MKDEV (MAJOR (media_dev_t), mdev->minor),1 ); + ret =cdev_add (&devnode->cdev,MKDEV (MAJOR (media_dev_t), devnode->minor),1 );if (ret <0 ) {pr_err ("%s: cdev_add failed\n" , __func__); goto error; }/* Part 3: Register the media device */ - mdev->dev.bus = &media_bus_type; - mdev->dev.devt =MKDEV (MAJOR (media_dev_t), mdev->minor); - mdev->dev.release = media_devnode_release; -if (mdev->parent) - mdev->dev.parent = mdev->parent; -dev_set_name (&mdev->dev,"media%d" , mdev->minor); - ret =device_register (&mdev->dev); + devnode->dev.bus = &media_bus_type; + devnode->dev.devt =MKDEV (MAJOR (media_dev_t), devnode->minor); + devnode->dev.release = media_devnode_release; +if (devnode->parent) + devnode->dev.parent = devnode->parent; +dev_set_name (&devnode->dev,"media%d" , devnode->minor); + ret =device_register (&devnode->dev);if (ret <0 ) {pr_err ("%s: device_register failed\n" , __func__); goto error; }/* Part 4: Activate this minor. The char device can now be used. */ -set_bit (MEDIA_FLAG_REGISTERED , &mdev->flags); +set_bit (MEDIA_FLAG_REGISTERED , &devnode->flags);return 0 ; error:mutex_lock (&media_devnode_lock); -cdev_del (&mdev->cdev); -clear_bit (mdev->minor, media_devnode_nums); +cdev_del (&devnode->cdev); +clear_bit (devnode->minor, media_devnode_nums);mutex_unlock (&media_devnode_lock);return ret;
@@ -292,7 +292,7 @@ int __must_check media_devnode_register(struct media_devnode *mdev,/** * media_devnode_unregister - unregister a media device node -* @mdev: the device node to unregister +* @devnode: the device node to unregister * * This unregisters the passed device. Future open calls will be met with * errors.
@@ -300,16 +300,16 @@ int __must_check media_devnode_register(struct media_devnode *mdev,* This function can safely be called if the device node has never been * registered or has already been unregistered. */ -void media_devnode_unregister (struct media_devnode *mdev) +void media_devnode_unregister (struct media_devnode *devnode) { -/* Check if mdev was ever registered at all */ -if (!media_devnode_is_registered (mdev)) +/* Check if devnode was ever registered at all */ +if (!media_devnode_is_registered (devnode))return ;mutex_lock (&media_devnode_lock); -clear_bit (MEDIA_FLAG_REGISTERED , &mdev->flags); +clear_bit (MEDIA_FLAG_REGISTERED , &devnode->flags);mutex_unlock (&media_devnode_lock); -device_unregister (&mdev->dev); +device_unregister (&devnode->dev); }/*
include/media/media-devnode.h +5 -5
@@ -80,24 +80,24 @@ struct media_devnode {unsigned long flags;/* Use bitops to access flags */ /* callbacks */ - void (*release)(struct media_devnode *mdev); + void (*release)(struct media_devnode *devnode); };/* dev to media_devnode */ #define to_media_devnode (cd) container_of(cd, struct media_devnode, dev) -int __must_check media_devnode_register (struct media_devnode *mdev, +int __must_check media_devnode_register (struct media_devnode *devnode,struct module *owner); -void media_devnode_unregister (struct media_devnode *mdev); +void media_devnode_unregister (struct media_devnode *devnode);static inline struct media_devnode *media_devnode_data (struct file *filp) {return filp->private_data; } -static inline int media_devnode_is_registered (struct media_devnode *mdev) +static inline int media_devnode_is_registered (struct media_devnode *devnode) { -return test_bit (MEDIA_FLAG_REGISTERED , &mdev->flags); +return test_bit (MEDIA_FLAG_REGISTERED , &devnode->flags); }#endif /* _MEDIA_DEVNODE_H */
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 17/65 media-device: dynamically allocate struct media_devnode
In reply to Greg Kroah-HartmanFrom: Mauro Carvalho Chehab <[email protected]>
commit a087ce704b802becbb4b0f2a20f2cb3f6911802e upstream.
struct media_devnode is currently embedded at struct media_device.
While this works fine during normal usage, it leads to a race condition during devnode unregister. the problem is that drivers assume that, after calling media_device_unregister(), the struct that contains media_device can be freed. This is not true, as it can't be freed until userspace closes all opened /dev/media devnodes.
In other words, if the media devnode is still open, and media_device gets freed, any call to an ioctl will make the core to try to access struct media_device, with will cause an use-after-free and even GPF.
Fix this by dynamically allocating the struct media_devnode and only freeing it when it is safe.
[bwh: Backported to 4.4:
- Drop change in au0828
- Include <linux/slab.h> in media-device.c
- Adjust context]
--- drivers/media/media-device.c | 40 +++++++++++++++++++++--------- drivers/media/media-devnode.c | 8 +++++- drivers/media/usb/uvc/uvc_driver.c | 2 +- include/media/media-device.h | 5 +--- include/media/media-devnode.h | 10 +++++++- 5 files changed, 46 insertions(+), 19 deletions(-)
drivers/media/media-device.c +28 -12
@@ -24,6 +24,7 @@#include <linux/export.h> #include <linux/ioctl.h> #include <linux/media.h> +#include <linux/slab.h> #include <linux/types.h> #include <media/media-device.h>
@@ -234,7 +235,7 @@ static long media_device_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) {struct media_devnode *devnode =media_devnode_data (filp); -struct media_device *dev =to_media_device (devnode); +struct media_device *dev = devnode->media_dev;long ret;switch (cmd) {
@@ -303,7 +304,7 @@ static long media_device_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) {struct media_devnode *devnode =media_devnode_data (filp); -struct media_device *dev =to_media_device (devnode); +struct media_device *dev = devnode->media_dev;long ret;switch (cmd) {
@@ -344,7 +345,8 @@ static const struct media_file_operations media_device_fops = {static ssize_t show_model (struct device *cd,struct device_attribute *attr,char *buf) { -struct media_device *mdev =to_media_device (to_media_devnode (cd)); +struct media_devnode *devnode =to_media_devnode (cd); +struct media_device *mdev = devnode->media_dev;return sprintf (buf,"%.*s\n" , (int )sizeof (mdev->model), mdev->model); }
@@ -372,6 +374,7 @@ static void media_device_release(struct media_devnode *mdev)int __must_check __media_device_register (struct media_device *mdev,struct module *owner) { +struct media_devnode *devnode;int ret;if (WARN_ON (mdev->dev ==NULL || mdev->model[0 ] ==0 ))
@@ -382,17 +385,27 @@ int __must_check __media_device_register(struct media_device *mdev,spin_lock_init (&mdev->lock);mutex_init (&mdev->graph_mutex); + devnode =kzalloc (sizeof (*devnode),GFP_KERNEL ); +if (!devnode) +return -ENOMEM ; +/* Register the device node. */ - mdev->devnode.fops = &media_device_fops; - mdev->devnode.parent = mdev->dev; - mdev->devnode.release = media_device_release; - ret =media_devnode_register (&mdev->devnode, owner); -if (ret <0 ) + mdev->devnode = devnode; + devnode->fops = &media_device_fops; + devnode->parent = mdev->dev; + devnode->release = media_device_release; + ret =media_devnode_register (mdev, devnode, owner); +if (ret <0 ) { + mdev->devnode =NULL ; +kfree (devnode);return ret; + } - ret =device_create_file (&mdev->devnode.dev, &dev_attr_model); + ret =device_create_file (&devnode->dev, &dev_attr_model);if (ret <0 ) { -media_devnode_unregister (&mdev->devnode); + mdev->devnode =NULL ; +media_devnode_unregister (devnode); +kfree (devnode);return ret; }
@@ -413,8 +426,11 @@ void media_device_unregister(struct media_device *mdev)list_for_each_entry_safe (entity, next, &mdev->entities, list)media_device_unregister_entity (entity); -device_remove_file (&mdev->devnode.dev, &dev_attr_model); -media_devnode_unregister (&mdev->devnode); +/* Check if mdev devnode was registered */ +if (media_devnode_is_registered (mdev->devnode)) { +device_remove_file (&mdev->devnode->dev, &dev_attr_model); +media_devnode_unregister (mdev->devnode); + } }EXPORT_SYMBOL_GPL (media_device_unregister);
drivers/media/media-devnode.c +7 -1
@@ -44,6 +44,7 @@#include <linux/uaccess.h> #include <media/media-devnode.h> +#include <media/media-device.h> #define MEDIA_NUM_DEVICES 256#define MEDIA_NAME "media"
@@ -74,6 +75,8 @@ static void media_devnode_release(struct device *cd)/* Release media_devnode and perform other cleanups as needed. */ if (devnode->release) devnode->release (devnode); + +kfree (devnode); }static struct bus_type media_bus_type = {
@@ -221,6 +224,7 @@ static const struct file_operations media_devnode_fops = {/** * media_devnode_register - register a media device node +* @media_dev: struct media_device we want to register a device node * @devnode: media device node structure we want to register * * The registration code assigns minor numbers and registers the new device node
@@ -233,7 +237,8 @@ static const struct file_operations media_devnode_fops = {* the media_devnode structure is *not* called, so the caller is responsible for * freeing any data. */ -int __must_check media_devnode_register (struct media_devnode *devnode, +int __must_check media_devnode_register (struct media_device *mdev, +struct media_devnode *devnode,struct module *owner) {int minor;
@@ -252,6 +257,7 @@ int __must_check media_devnode_register(struct media_devnode *devnode,mutex_unlock (&media_devnode_lock); devnode->minor = minor; + devnode->media_dev = mdev;/* Part 2: Initialize and register the character device */ cdev_init (&devnode->cdev, &media_devnode_fops);
drivers/media/usb/uvc/uvc_driver.c +1 -1
@@ -1800,7 +1800,7 @@ static void uvc_delete(struct uvc_device *dev)if (dev->vdev.dev)v4l2_device_unregister (&dev->vdev);#ifdef CONFIG_MEDIA_CONTROLLER -if (media_devnode_is_registered (&dev->mdev.devnode)) +if (media_devnode_is_registered (dev->mdev.devnode))media_device_unregister (&dev->mdev);#endif
include/media/media-device.h +1 -4
@@ -60,7 +60,7 @@ struct device;struct media_device {/* dev->driver_data points to this struct. */ struct device *dev; -struct media_devnode devnode; +struct media_devnode *devnode;char model[32 ];char serial[40 ];
@@ -84,9 +84,6 @@ struct media_device {#define MEDIA_DEV_NOTIFY_PRE_LINK_CH 0#define MEDIA_DEV_NOTIFY_POST_LINK_CH 1 -/* media_devnode to media_device */ -#define to_media_device (node) container_of(node, struct media_device, devnode) -int __must_check __media_device_register (struct media_device *mdev,struct module *owner);#define media_device_register (mdev) __media_device_register(mdev, THIS_MODULE)
include/media/media-devnode.h +9 -1
@@ -33,6 +33,8 @@#include <linux/device.h> #include <linux/cdev.h> +struct media_device ; +/* * Flag to mark the media_devnode struct as registered. Drivers must not touch * this flag directly, it will be set and cleared by media_devnode_register and
@@ -67,6 +69,8 @@ struct media_file_operations {* before registering the node. */ struct media_devnode { +struct media_device *media_dev; +/* device ops */ const struct media_file_operations *fops;
@@ -86,7 +90,8 @@ struct media_devnode {/* dev to media_devnode */ #define to_media_devnode (cd) container_of(cd, struct media_devnode, dev) -int __must_check media_devnode_register (struct media_devnode *devnode, +int __must_check media_devnode_register (struct media_device *mdev, +struct media_devnode *devnode,struct module *owner);void media_devnode_unregister (struct media_devnode *devnode);
@@ -97,6 +102,9 @@ static inline struct media_devnode *media_devnode_data(struct file *filp)static inline int media_devnode_is_registered (struct media_devnode *devnode) { +if (!devnode) +return false; +return test_bit (MEDIA_FLAG_REGISTERED , &devnode->flags); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 18/65 media: fix use-after-free in cdev_put() when app exits after driver unbind
In reply to Greg Kroah-HartmanFrom: Shuah Khan <[email protected]>
commit 5b28dde51d0ccc54cee70756e1800d70bed7114a upstream.
When driver unbinds while media_ioctl is in progress, cdev_put() fails with when app exits after driver unbinds.
Add devnode struct device kobj as the cdev parent kobject. cdev_add() gets a reference to it and releases it in cdev_del() ensuring that the devnode is not deallocated as long as the application has the device file open.
media_devnode_register() initializes the struct device kobj before calling cdev_add(). media_devnode_unregister() does cdev_del() and then deletes the device. devnode is released when the last reference to the struct device is gone.
This problem is found on uvcvideo, em28xx, and au0828 drivers and fix has been tested on all three.
kernel: [ 193.599736] BUG: KASAN: use-after-free in cdev_put+0x4e/0x50
kernel: [ 193.599745] Read of size 8 by task media_device_te/1851
kernel: [ 193.599792] INFO: Allocated in __media_device_register+0x54
kernel: [ 193.599951] INFO: Freed in media_devnode_release+0xa4/0xc0
kernel: [ 193.601083] Call Trace:
kernel: [ 193.601093] [<ffffffff81aecac3>] dump_stack+0x67/0x94
kernel: [ 193.601102] [<ffffffff815359b2>] print_trailer+0x112/0x1a0
kernel: [ 193.601111] [<ffffffff8153b5e4>] object_err+0x34/0x40
kernel: [ 193.601119] [<ffffffff8153d9d4>] kasan_report_error+0x224/0x530
kernel: [ 193.601128] [<ffffffff814a2c3d>] ? kzfree+0x2d/0x40
kernel: [ 193.601137] [<ffffffff81539d72>] ? kfree+0x1d2/0x1f0
kernel: [ 193.601154] [<ffffffff8157ca7e>] ? cdev_put+0x4e/0x50
kernel: [ 193.601162] [<ffffffff8157ca7e>] cdev_put+0x4e/0x50
kernel: [ 193.601170] [<ffffffff815767eb>] __fput+0x52b/0x6c0
kernel: [ 193.601179] [<ffffffff8117743a>] ? switch_task_namespaces+0x2a
kernel: [ 193.601188] [<ffffffff815769ee>] ____fput+0xe/0x10
kernel: [ 193.601196] [<ffffffff81170023>] task_work_run+0x133/0x1f0
kernel: [ 193.601204] [<ffffffff8117746e>] ? switch_task_namespaces+0x5e
kernel: [ 193.601213] [<ffffffff8111b50c>] do_exit+0x72c/0x2c20
kernel: [ 193.601224] [<ffffffff8111ade0>] ? release_task+0x1250/0x1250 -
-
-
kernel: [ 193.601360] [<ffffffff81003587>] ? exit_to_usermode_loop+0xe7
kernel: [ 193.601368] [<ffffffff810035c0>] exit_to_usermode_loop+0x120
kernel: [ 193.601376] [<ffffffff810061da>] syscall_return_slowpath+0x16a
kernel: [ 193.601386] [<ffffffff82848b33>] entry_SYSCALL_64_fastpath+0xa6
--- drivers/media/media-device.c | 6 +++-- drivers/media/media-devnode.c | 48 +++++++++++++++++++++-------------- 2 files changed, 33 insertions(+), 21 deletions(-)
drivers/media/media-device.c +4 -2
@@ -396,16 +396,16 @@ int __must_check __media_device_register(struct media_device *mdev, devnode->release = media_device_release; ret =media_devnode_register (mdev, devnode, owner);if (ret <0 ) { +/* devnode free is handled in media_devnode_*() */ mdev->devnode =NULL ; -kfree (devnode);return ret; } ret =device_create_file (&devnode->dev, &dev_attr_model);if (ret <0 ) { +/* devnode free is handled in media_devnode_*() */ mdev->devnode =NULL ;media_devnode_unregister (devnode); -kfree (devnode);return ret; }
@@ -430,6 +430,8 @@ void media_device_unregister(struct media_device *mdev)if (media_devnode_is_registered (mdev->devnode)) {device_remove_file (&mdev->devnode->dev, &dev_attr_model);media_devnode_unregister (mdev->devnode); +/* devnode free is handled in media_devnode_*() */ + mdev->devnode =NULL ; } }EXPORT_SYMBOL_GPL (media_device_unregister);
drivers/media/media-devnode.c +29 -19
107 lines not on this page · raw message
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 19/65 media: fix media devnode ioctl/syscall and unregister race
In reply to Greg Kroah-HartmanFrom: Shuah Khan <[email protected]>
commit 6f0dd24a084a17f9984dd49dffbf7055bf123993 upstream.
Media devnode open/ioctl could be in progress when media device unregister is initiated. System calls and ioctls check media device registered status at the beginning, however, there is a window where unregister could be in progress without changing the media devnode status to unregistered.
process 1 process 2
fd = open(/dev/media0)media_devnode_is_registered()
(returns true here)
media_device_unregister()
(unregister is in progress and devnode isn't unregistered yet)
...ioctl(fd, ...)__media_ioctl()media_devnode_is_registered()
(returns true here) ... media_devnode_unregister() ... (driver releases the media device memory)
media_device_ioctl()
(By this point
devnode->media_dev does not
point to allocated memory.
use-after free in in mutex_lock_nested)
BUG: KASAN: use-after-free in mutex_lock_nested+0x79c/0x800 at addr
ffff8801ebe914f0
Fix it by clearing register bit when unregister starts to avoid the race.
process 1 process 2
fd = open(/dev/media0)media_devnode_is_registered()
(could return true here)
media_device_unregister()
(clear the register bit,
then start unregister.)
...ioctl(fd, ...)__media_ioctl()media_devnode_is_registered()
(return false here, ioctl
returns I/O error, and
will not access media
device memory)
...
media_devnode_unregister()
...
(driver releases the media device
memory)
--- drivers/media/media-device.c | 15 ++++++++------- drivers/media/media-devnode.c | 19 ++++++++++++------- include/media/media-devnode.h | 14 ++++++++++++++ 3 files changed, 34 insertions(+), 14 deletions(-)
drivers/media/media-device.c +8 -7
@@ -405,6 +405,7 @@ int __must_check __media_device_register(struct media_device *mdev,if (ret <0 ) {/* devnode free is handled in media_devnode_*() */ mdev->devnode =NULL ; +media_devnode_unregister_prepare (devnode);media_devnode_unregister (devnode);return ret; }
@@ -423,16 +424,16 @@ void media_device_unregister(struct media_device *mdev)struct media_entity *entity;struct media_entity *next; +/* Clear the devnode register bit to avoid races with media dev open */ +media_devnode_unregister_prepare (mdev->devnode); +list_for_each_entry_safe (entity, next, &mdev->entities, list)media_device_unregister_entity (entity); -/* Check if mdev devnode was registered */ -if (media_devnode_is_registered (mdev->devnode)) { -device_remove_file (&mdev->devnode->dev, &dev_attr_model); -media_devnode_unregister (mdev->devnode); -/* devnode free is handled in media_devnode_*() */ - mdev->devnode =NULL ; - } +device_remove_file (&mdev->devnode->dev, &dev_attr_model); +media_devnode_unregister (mdev->devnode); +/* devnode free is handled in media_devnode_*() */ + mdev->devnode =NULL ; }EXPORT_SYMBOL_GPL (media_device_unregister);
drivers/media/media-devnode.c +12 -7
@@ -302,6 +302,17 @@ int __must_check media_devnode_register(struct media_device *mdev,return ret; } +void media_devnode_unregister_prepare (struct media_devnode *devnode) +{ +/* Check if devnode was ever registered at all */ +if (!media_devnode_is_registered (devnode)) +return ; + +mutex_lock (&media_devnode_lock); +clear_bit (MEDIA_FLAG_REGISTERED , &devnode->flags); +mutex_unlock (&media_devnode_lock); +} +/** * media_devnode_unregister - unregister a media device node * @devnode: the device node to unregister
@@ -309,17 +320,11 @@ int __must_check media_devnode_register(struct media_device *mdev,* This unregisters the passed device. Future open calls will be met with * errors. * -* This function can safely be called if the device node has never been -* registered or has already been unregistered. +* Should be called after media_devnode_unregister_prepare() */ void media_devnode_unregister (struct media_devnode *devnode) { -/* Check if devnode was ever registered at all */ -if (!media_devnode_is_registered (devnode)) -return ; -mutex_lock (&media_devnode_lock); -clear_bit (MEDIA_FLAG_REGISTERED , &devnode->flags);/* Delete the cdev on this minor as well */ cdev_del (&devnode->cdev);mutex_unlock (&media_devnode_lock);
include/media/media-devnode.h +14 -0
@@ -93,6 +93,20 @@ struct media_devnode {int __must_check media_devnode_register (struct media_device *mdev,struct media_devnode *devnode,struct module *owner); + +/** +* media_devnode_unregister_prepare - clear the media device node register bit +* @devnode: the device node to prepare for unregister +* +* This clears the passed device register bit. Future open calls will be met +* with errors. Should be called before media_devnode_unregister() to avoid +* races with unregister and device file open calls. +* +* This function can safely be called if the device node has never been +* registered or has already been unregistered. +*/ +void media_devnode_unregister_prepare (struct media_devnode *devnode); +void media_devnode_unregister (struct media_devnode *devnode);static inline struct media_devnode *media_devnode_data (struct file *filp)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 20/65 i2c: dev: switch from register_chrdev to cdev API
In reply to Greg Kroah-HartmanFrom: Erico Nunes <[email protected]>
commit d6760b14d4a1243f918d983bba1e35c5a5cd5a6d upstream.
i2c-dev had never moved away from the older register_chrdev interface to implement its char device registration. The register_chrdev API has the limitation of enabling only up to 256 i2c-dev busses to exist.
Large platforms with lots of i2c devices (i.e. pluggable transceivers) with dedicated busses may have to exceed that limit.
In particular, there are also platforms making use of the i2c bus multiplexing API, which instantiates a virtual bus for each possible multiplexed selection.
This patch removes the register_chrdev usage and replaces it with the less old cdev API, which takes away the 256 i2c-dev bus limitation. It should not have any other impact for i2c bus drivers or user space.
This patch has been tested on qemu x86 and qemu powerpc platforms with the aid of a module which adds and removes 5000 virtual i2c busses, as well as validated on an existing powerpc hardware platform which makes use of the i2c bus multiplexing API.
i2c-dev busses with device minor numbers larger than 256 have also been validated to work with the existing i2c-tools.
--- drivers/i2c/i2c-dev.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
drivers/i2c/i2c-dev.c +15 -4
@@ -22,6 +22,7 @@/* The I2C_RDWR ioctl code is written by Kolja Waschk <[email protected]> */ +#include <linux/cdev.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h>
@@ -47,9 +48,10 @@ struct i2c_dev {struct list_head list;struct i2c_adapter *adap;struct device *dev; +struct cdev cdev; }; -#define I2C_MINORS 256 +#define I2C_MINORS MINORMASKstatic LIST_HEAD (i2c_dev_list);static DEFINE_SPINLOCK (i2c_dev_list_lock);
@@ -559,6 +561,12 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy)if (IS_ERR (i2c_dev))return PTR_ERR (i2c_dev); +cdev_init (&i2c_dev->cdev, &i2cdev_fops); + i2c_dev->cdev.owner =THIS_MODULE ; + res =cdev_add (&i2c_dev->cdev,MKDEV (I2C_MAJOR , adap->nr),1 ); +if (res) + goto error_cdev; +/* register this i2c device with the driver core */ i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, MKDEV(I2C_MAJOR, adap->nr), NULL,
@@ -572,6 +580,8 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy) adap->name, adap->nr);return 0 ; error: +cdev_del (&i2c_dev->cdev); +error_cdev:return_i2c_dev (i2c_dev);return res; }
@@ -591,6 +601,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)return_i2c_dev (i2c_dev);device_destroy (i2c_dev_class,MKDEV (I2C_MAJOR , adap->nr)); +cdev_del (&i2c_dev->cdev);pr_debug ("i2c-dev: adapter [%s] unregistered\n" , adap->name);return 0 ;
@@ -627,7 +638,7 @@ static int __init i2c_dev_init(void)printk (KERN_INFO "i2c /dev entries driver\n" ); - res =register_chrdev (I2C_MAJOR ,"i2c" , &i2cdev_fops); + res =register_chrdev_region (MKDEV (I2C_MAJOR ,0 ),I2C_MINORS ,"i2c" );if (res) goto out;
@@ -651,7 +662,7 @@ static int __init i2c_dev_init(void) out_unreg_class:class_destroy (i2c_dev_class); out_unreg_chrdev: -unregister_chrdev (I2C_MAJOR ,"i2c" ); +unregister_chrdev_region (MKDEV (I2C_MAJOR ,0 ),I2C_MINORS ); out:printk (KERN_ERR "%s: Driver Initialisation failed\n" , __FILE__);return res;
@@ -662,7 +673,7 @@ static void __exit i2c_dev_exit(void)bus_unregister_notifier (&i2c_bus_type, &i2cdev_notifier);i2c_for_each_dev (NULL , i2cdev_detach_adapter);class_destroy (i2c_dev_class); -unregister_chrdev (I2C_MAJOR ,"i2c" ); +unregister_chrdev_region (MKDEV (I2C_MAJOR ,0 ),I2C_MINORS ); } MODULE_AUTHOR("Frodo Looijaard <[email protected]> and "
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 21/65 i2c: dev: dont start function name with return
In reply to Greg Kroah-HartmanFrom: Wolfram Sang <[email protected]>
commit 72a71f869c95dc11b73f09fe18c593d4a0618c3f upstream.
I stumbled multiple times over 'return_i2c_dev', especially before the actual 'return res'. It makes the code hard to read, so reanme the function to 'put_i2c_dev' which also better matches 'get_free_i2c_dev'.
--- drivers/i2c/i2c-dev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/i2c-dev.c +3 -3
@@ -91,7 +91,7 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)return i2c_dev; } -static void return_i2c_dev (struct i2c_dev *i2c_dev) +static void put_i2c_dev (struct i2c_dev *i2c_dev) {spin_lock (&i2c_dev_list_lock);list_del (&i2c_dev->list);
@@ -582,7 +582,7 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy) error:cdev_del (&i2c_dev->cdev); error_cdev: -return_i2c_dev (i2c_dev); +put_i2c_dev (i2c_dev);return res; }
@@ -599,7 +599,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)if (!i2c_dev)/* attach_adapter must have failed */ return 0 ; -return_i2c_dev (i2c_dev); +put_i2c_dev (i2c_dev);device_destroy (i2c_dev_class,MKDEV (I2C_MAJOR , adap->nr));cdev_del (&i2c_dev->cdev);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 22/65 i2c: dev: use after free in detach
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
commit e6be18f6d62c1d3b331ae020b76a29c2ccf6b0bf upstream.
The call to put_i2c_dev() frees "i2c_dev" so there is a use after free when we call cdev_del(&i2c_dev->cdev).
--- drivers/i2c/i2c-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/i2c-dev.c +1 -1
@@ -599,9 +599,9 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)if (!i2c_dev)/* attach_adapter must have failed */ return 0 ; +cdev_del (&i2c_dev->cdev);put_i2c_dev (i2c_dev);device_destroy (i2c_dev_class,MKDEV (I2C_MAJOR , adap->nr)); -cdev_del (&i2c_dev->cdev);pr_debug ("i2c-dev: adapter [%s] unregistered\n" , adap->name);return 0 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 23/65 i2c-dev: dont get i2c adapter via i2c_dev
In reply to Greg Kroah-HartmanFrom: viresh kumar <[email protected]>
commit 5136ed4fcb05cd4981cc6034a11e66370ed84789 upstream.
There is no code protecting i2c_dev to be freed after it is returned from i2c_dev_get_by_minor() and using it to access the value which we already have (minor) isn't safe really.
Avoid using it and get the adapter directly from 'minor'.
--- drivers/i2c/i2c-dev.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/i2c/i2c-dev.c +1 -6
@@ -492,13 +492,8 @@ static int i2cdev_open(struct inode *inode, struct file *file)unsigned int minor =iminor (inode);struct i2c_client *client;struct i2c_adapter *adap; -struct i2c_dev *i2c_dev; - - i2c_dev =i2c_dev_get_by_minor (minor); -if (!i2c_dev) -return -ENODEV ; - adap =i2c_get_adapter (i2c_dev->adap->nr); + adap =i2c_get_adapter (minor);if (!adap)return -ENODEV ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 24/65 i2c: dev: Fix the race between the release of i2c_dev and cdev
In reply to Greg Kroah-HartmanFrom: Kevin Hao <[email protected]>
commit 1413ef638abae4ab5621901cf4d8ef08a4a48ba6 upstream.
The struct cdev is embedded in the struct i2c_dev. In the current code,
we would free the i2c_dev struct directly in put_i2c_dev(), but the
cdev is manged by a kobject, and the release of it is not predictable.
So it is very possible that the i2c_dev is freed before the cdev is
entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118
This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d7fda to make sure that the release of i2c_dev and cdev are in sequence.
--- drivers/i2c/i2c-dev.c | 48 +++++++++++++++++++++++-------------------- 1 file changed, 26 insertions(+), 22 deletions(-)
drivers/i2c/i2c-dev.c +26 -22
@@ -47,7 +47,7 @@struct i2c_dev {struct list_head list;struct i2c_adapter *adap; -struct device *dev; +struct device dev;struct cdev cdev; };
@@ -91,12 +91,14 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)return i2c_dev; } -static void put_i2c_dev (struct i2c_dev *i2c_dev) +static void put_i2c_dev (struct i2c_dev *i2c_dev,bool del_cdev) {spin_lock (&i2c_dev_list_lock);list_del (&i2c_dev->list);spin_unlock (&i2c_dev_list_lock); -kfree (i2c_dev); +if (del_cdev) +cdev_device_del (&i2c_dev->cdev, &i2c_dev->dev); +put_device (&i2c_dev->dev); } static ssize_t name_show(struct device *dev,
@@ -542,6 +544,14 @@ static const struct file_operations i2cdev_fops = {static struct class *i2c_dev_class; +static void i2cdev_dev_release (struct device *dev) +{ +struct i2c_dev *i2c_dev; + + i2c_dev = container_of(dev, struct i2c_dev, dev); +kfree (i2c_dev); +} +static int i2cdev_attach_adapter (struct device *dev,void *dummy) {struct i2c_adapter *adap;
@@ -558,27 +568,23 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy)cdev_init (&i2c_dev->cdev, &i2cdev_fops); i2c_dev->cdev.owner =THIS_MODULE ; - res =cdev_add (&i2c_dev->cdev,MKDEV (I2C_MAJOR , adap->nr),1 ); -if (res) - goto error_cdev; - -/* register this i2c device with the driver core */ - i2c_dev->dev =device_create (i2c_dev_class, &adap->dev, -MKDEV (I2C_MAJOR , adap->nr),NULL , -"i2c-%d" , adap->nr); -if (IS_ERR (i2c_dev->dev)) { - res =PTR_ERR (i2c_dev->dev); - goto error; + +device_initialize (&i2c_dev->dev); + i2c_dev->dev.devt =MKDEV (I2C_MAJOR , adap->nr); + i2c_dev->dev.class = i2c_dev_class; + i2c_dev->dev.parent = &adap->dev; + i2c_dev->dev.release = i2cdev_dev_release; +dev_set_name (&i2c_dev->dev,"i2c-%d" , adap->nr); + + res =cdev_device_add (&i2c_dev->cdev, &i2c_dev->dev); +if (res) { +put_i2c_dev (i2c_dev, false); +return res; }pr_debug ("i2c-dev: adapter [%s] registered as minor %d\n" , adap->name, adap->nr);return 0 ; -error: -cdev_del (&i2c_dev->cdev); -error_cdev: -put_i2c_dev (i2c_dev); -return res; }static int i2cdev_detach_adapter (struct device *dev,void *dummy)
@@ -594,9 +600,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)if (!i2c_dev)/* attach_adapter must have failed */ return 0 ; -cdev_del (&i2c_dev->cdev); -put_i2c_dev (i2c_dev); -device_destroy (i2c_dev_class,MKDEV (I2C_MAJOR , adap->nr)); +put_i2c_dev (i2c_dev, true);pr_debug ("i2c-dev: adapter [%s] unregistered\n" , adap->name);return 0 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 25/65 padata: set cpu_index of unused CPUs to -1
In reply to Greg Kroah-HartmanFrom: Mathias Krause <[email protected]>
[ Upstream commit 1bd845bcb41d5b7f83745e0cb99273eb376f2ec5 ]
The parallel queue per-cpu data structure gets initialized only for CPUs in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer may run on a different CPU and might wrongly decide it's the target CPU for the next reorder item as per-cpu memory gets memset(0) and we might be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0.
Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index' compare in padata_get_next() fail in this case by initializing the cpu_index member of all per-cpu parallel queues. Use -1 for unused ones.
--- kernel/padata.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
kernel/padata.c +7 -1
@@ -461,8 +461,14 @@ static void padata_init_pqueues(struct parallel_data *pd)struct padata_parallel_queue *pqueue; cpu_index =0 ; -for_each_cpu (cpu, pd->cpumask.pcpu) { +for_each_possible_cpu (cpu) { pqueue =per_cpu_ptr (pd->pqueue, cpu); + +if (!cpumask_test_cpu (cpu, pd->cpumask.pcpu)) { + pqueue->cpu_index =-1 ; +continue ; + } + pqueue->pd = pd; pqueue->cpu_index = cpu_index; cpu_index++;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 26/65 sched/fair, cpumask: Export for_each_cpu_wrap()
In reply to Greg Kroah-HartmanFrom: Peter Zijlstra <[email protected]>
[ Upstream commit c743f0a5c50f2fcbc628526279cfa24f3dabe182 ]
More users for for_each_cpu_wrap() have appeared. Promote the construct to generic cpumask interface.
The implementation is slightly modified to reduce arguments.
[dj: include only what's added to the cpumask interface, 4.4 doesn't
have them in the scheduler]
--- include/linux/cpumask.h | 17 +++++++++++++++++ lib/cpumask.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+)
include/linux/cpumask.h +17 -0
@@ -232,6 +232,23 @@ unsigned int cpumask_local_spread(unsigned int i, int node); (cpu) =cpumask_next_zero ((cpu), (mask)), \ (cpu) < nr_cpu_ids;) +extern int cpumask_next_wrap (int n,const struct cpumask *mask,int start,bool wrap); + +/** +* for_each_cpu_wrap - iterate over every cpu in a mask, starting at a specified location +* @cpu: the (optionally unsigned) integer iterator +* @mask: the cpumask poiter +* @start: the start location +* +* The implementation does not assume any bit in @mask is set (including @start). +* +* After the loop, cpu is >= nr_cpu_ids. +*/ +#define for_each_cpu_wrap (cpu, mask, start) \ + for ((cpu) = cpumask_next_wrap((start)-1, (mask), (start), false); \ + (cpu) < nr_cpumask_bits; \ + (cpu) = cpumask_next_wrap((cpu), (mask), (start), true)) +/** * for_each_cpu_and - iterate over every cpu in both masks * @cpu: the (optionally unsigned) integer iterator
lib/cpumask.c +32 -0
@@ -42,6 +42,38 @@ int cpumask_any_but(const struct cpumask *mask, unsigned int cpu)return i; } +/** +* cpumask_next_wrap - helper to implement for_each_cpu_wrap +* @n: the cpu prior to the place to search +* @mask: the cpumask pointer +* @start: the start point of the iteration +* @wrap: assume @n crossing @start terminates the iteration +* +* Returns >= nr_cpu_ids on completion +* +* Note: the @wrap argument is required for the start condition when +* we cannot assume @start is set in @mask. +*/ +int cpumask_next_wrap (int n,const struct cpumask *mask,int start,bool wrap) +{ +int next; + +again: + next =cpumask_next (n, mask); + +if (wrap && n < start && next >= start) { +return nr_cpumask_bits; + + }else if (next >= nr_cpumask_bits) { + wrap = true; + n =-1 ; + goto again; + } + +return next; +} +EXPORT_SYMBOL (cpumask_next_wrap); +/* These are not inline because of header tangles. */ #ifdef CONFIG_CPUMASK_OFFSTACK /**
Signature · 1 line
2.25.1
RE: [PATCH 4.4 26/65] sched/fair, cpumask: Export for_each_cpu_wrap()
Hi,
Quoted 30 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Greg Kroah-Hartman
Sent: Wednesday, May 27, 2020 3:53 AM
To: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>; [email protected]; Peter Zijlstra (Intel) <[email protected]>; Lauro Ramos Venancio <[email protected]>; Linus Torvalds <[email protected]>; Mike Galbraith <[email protected]>; Rik van Riel <[email protected]>; Thomas Gleixner <[email protected]>; [email protected]; Ingo Molnar <[email protected]>; Daniel Jordan <[email protected]>; Sasha Levin <[email protected]>
Subject: [PATCH 4.4 26/65] sched/fair, cpumask: Exportfor_each_cpu_wrap()From: Peter Zijlstra <[email protected]>
[ Upstream commit
c743f0a5c50f2fcbc628526279cfa24f3dabe182]More users for
for_each_cpu_wrap()have appeared. Promote the construct to generic cpumask interface.The implementation is slightly modified to reduce arguments.
Signed-off-by Peter Zijlstra (Intel) <[email protected]>Cc Lauro Ramos Venancio <[email protected]>Cc Linus Torvalds <[email protected]>Cc Mike Galbraith <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Rik van Riel <[email protected]>Cc Thomas Gleixner <[email protected]>Signed-off-by Ingo Molnar <[email protected]>
Quoted 8 lines
[dj: include only what's added to the cpumask interface, 4.4 doesn't
have them in the scheduler]Signed-off-by Daniel Jordan <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- include/linux/cpumask.h | 17 +++++++++++++++++ lib/cpumask.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+)
This commit also needs the following commits:
commit d207af2eab3f8668b95ad02b21930481c42806fd
Author: Michael Kelley <[email protected]> Date: Wed Feb 14 02:54:03 2018 +0000
cpumask: Make for_each_cpu_wrap() available on UP as well
for_each_cpu_wrap() was originally added in the #else half of a large "#if NR_CPUS == 1" statement, but was omitted in the #if half. This patch adds the missing #if half to prevent compile errors when NR_CPUS is 1.
Please apply this commit.
Best regards,
Nobuhro
Quoted 76 lines
include/linux/cpumask.h +17
-0@@ -232,6 +232,23 @@ unsigned int cpumask_local_spread(unsigned int i, int node); (cpu) =cpumask_next_zero ((cpu), (mask)), \ (cpu) < nr_cpu_ids;) +extern int cpumask_next_wrap (int n,const struct cpumask *mask,int start,bool wrap); + +/** +* for_each_cpu_wrap - iterate over every cpu in a mask, starting at a specified location +* @cpu: the (optionally unsigned) integer iterator +* @mask: the cpumask poiter +* @start: the start location +* +* The implementation does not assume any bit in @mask is set (including @start). +* +* After the loop, cpu is >= nr_cpu_ids. +*/ +#define for_each_cpu_wrap (cpu, mask, start) \ + for ((cpu) = cpumask_next_wrap((start)-1, (mask), (start), false); \ + (cpu) < nr_cpumask_bits; \ + (cpu) = cpumask_next_wrap((cpu), (mask), (start), true)) +/** * for_each_cpu_and - iterate over every cpu in both masks * @cpu: the (optionally unsigned) integer iterator lib/cpumask.c +32
-1@@ -42,6 +42,38 @@ int cpumask_any_but(const struct cpumask *mask, unsigned int cpu)return i; } +/** +* cpumask_next_wrap - helper to implement for_each_cpu_wrap +* @n: the cpu prior to the place to search +* @mask: the cpumask pointer +* @start: the start point of the iteration +* @wrap: assume @n crossing @start terminates the iteration +* +* Returns >= nr_cpu_ids on completion +* +* Note: the @wrap argument is required for the start condition when +* we cannot assume @start is set in @mask. +*/ +int cpumask_next_wrap (int n,const struct cpumask *mask,int start,bool wrap) +{ +int next; + +again: + next =cpumask_next (n, mask); + +if (wrap && n < start && next >= start) { +return nr_cpumask_bits; + + }else if (next >= nr_cpumask_bits) { + wrap = true; + n =-1 ; + goto again; + } + +return next; +} +EXPORT_SYMBOL (cpumask_next_wrap); +/* These are not inline because of header tangles. */ #ifdef CONFIG_CPUMASK_OFFSTACK /** -- 2.25.1
Greg KH
maintainerRe: [PATCH 4.4 26/65] sched/fair, cpumask: Export for_each_cpu_wrap()
Quoted 66 lines · On Wed, May 27, 2020 at 07:50:56AM +0000, [email protected]…
Hi,
Quoted 30 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Greg Kroah-Hartman
Sent: Wednesday, May 27, 2020 3:53 AM
To: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>; [email protected]; Peter Zijlstra (Intel) <[email protected]>; Lauro Ramos Venancio <[email protected]>; Linus Torvalds <[email protected]>; Mike Galbraith <[email protected]>; Rik van Riel <[email protected]>; Thomas Gleixner <[email protected]>; [email protected]; Ingo Molnar <[email protected]>; Daniel Jordan <[email protected]>; Sasha Levin <[email protected]>
Subject: [PATCH 4.4 26/65] sched/fair, cpumask: Exportfor_each_cpu_wrap()From: Peter Zijlstra <[email protected]>
[ Upstream commit
c743f0a5c50f2fcbc628526279cfa24f3dabe182]More users for
for_each_cpu_wrap()have appeared. Promote the construct to generic cpumask interface.The implementation is slightly modified to reduce arguments.
Signed-off-by Peter Zijlstra (Intel) <[email protected]>Cc Lauro Ramos Venancio <[email protected]>Cc Linus Torvalds <[email protected]>Cc Mike Galbraith <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Rik van Riel <[email protected]>Cc Thomas Gleixner <[email protected]>Signed-off-by Ingo Molnar <[email protected]>Quoted 8 lines
[dj: include only what's added to the cpumask interface, 4.4 doesn't
have them in the scheduler]Signed-off-by Daniel Jordan <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- include/linux/cpumask.h | 17 +++++++++++++++++ lib/cpumask.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+)This commit also needs the following commits:
commit
d207af2eab3f8668b95ad02b21930481c42806fdAuthor: Michael Kelley <[email protected]> Date: Wed Feb 14 02:54:03 2018 +0000cpumask: Make
for_each_cpu_wrap()available on UP as well
for_each_cpu_wrap()was originally added in the #else half of a large "#ifNR_CPUS== 1" statement, but was omitted in the #if half. This patch adds the missing #if half to prevent compile errors whenNR_CPUSis 1.Reported-by kbuild test robot <[email protected]>Signed-off-by Michael Kelley <[email protected]>Cc Linus Torvalds <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Thomas Gleixner <[email protected]>Fixes c743f0a5c50f ("sched/fair, cpumask: Export for_each_cpu_wrap()")Link http://lkml.kernel.org/r/SN6PR1901MB2045F087F59450507D4FCC17CBF50@SN6PR1901MB2045.namprd19.prod.outlook.com open hereSigned-off-by Ingo Molnar <[email protected]>
Quoted 1 line
Please apply this commit.
Good catch, now queued up, thanks.
greg k-h
Re: [PATCH 4.4 26/65] sched/fair, cpumask: Export for_each_cpu_wrap()
Quoted 2 lines · Greg KH
Quoted 1 line · On Wed, May 27, 2020 at 07:50:56AM +0000, [email protected]…
Quoted 1 line
Subject: [PATCH 4.4 26/65] sched/fair, cpumask: Export
for_each_cpu_wrap()
...
Quoted 26 lines
Quoted 26 lines
This commit also needs the following commits:
commit
d207af2eab3f8668b95ad02b21930481c42806fdAuthor: Michael Kelley <[email protected]> Date: Wed Feb 14 02:54:03 2018 +0000cpumask: Make
for_each_cpu_wrap()available on UP as well
for_each_cpu_wrap()was originally added in the #else half of a large "#ifNR_CPUS== 1" statement, but was omitted in the #if half. This patch adds the missing #if half to prevent compile errors whenNR_CPUSis 1.Reported-by kbuild test robot <[email protected]>Signed-off-by Michael Kelley <[email protected]>Cc Linus Torvalds <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Thomas Gleixner <[email protected]>Fixes c743f0a5c50f ("sched/fair, cpumask: Export for_each_cpu_wrap()")Link http://lkml.kernel.org/r/SN6PR1901MB2045F087F59450507D4FCC17CBF50@SN6PR1901MB2045.namprd19.prod.outlook.com open hereSigned-off-by Ingo Molnar <[email protected]>
Quoted 3 lines
Quoted 1 line
Please apply this commit.
Good catch, now queued up, thanks.
I left this commit out because the 4.4 kernel only uses cpumask_next_wrap in padata, which is only enabled for SMP kernels, but it's probably best to be safe.
Daniel
Greg Kroah-Hartman
maintainerPATCH 27/65 padata: Replace delayed timer with immediate workqueue in padata_reorder
In reply to Greg Kroah-HartmanFrom: Herbert Xu <[email protected]>
[ Upstream commit 6fc4dbcf0276279d488c5fbbfabe94734134f4fa ]
The function padata_reorder will use a timer when it cannot progress while completed jobs are outstanding (pd->reorder_objects > 0). This is suboptimal as if we do end up using the timer then it would have introduced a gratuitous delay of one second.
In fact we can easily distinguish between whether completed jobs are outstanding and whether we can make progress. All we have to do is look at the next pqueue list.
This patch does that by replacing pd->processed with pd->cpu so that the next pqueue is more accessible.
A work queue is used instead of the original try_again to avoid hogging the CPU.
Note that we don't bother removing the work queue in padata_flush_queues because the whole premise is broken. You cannot flush async crypto requests so it makes no sense to even try. A subsequent patch will fix it by replacing it with a ref counting scheme.
[dj: - adjust context
- corrected setup_timer -> timer_setup to delete hunk
- skip padata_flush_queues() hunk, function already removed in 4.4]
--- include/linux/padata.h | 13 ++---- kernel/padata.c | 95 ++++++++---------------------------------- 2 files changed, 22 insertions(+), 86 deletions(-)
include/linux/padata.h +4 -9
@@ -24,7 +24,6 @@#include <linux/workqueue.h> #include <linux/spinlock.h> #include <linux/list.h> -#include <linux/timer.h> #include <linux/notifier.h> #include <linux/kobject.h>
@@ -85,18 +84,14 @@ struct padata_serial_queue {* @serial: List to wait for serialization after reordering. * @pwork: work struct for parallelization. * @swork: work struct for serialization. -* @pd: Backpointer to the internal control structure. * @work: work struct for parallelization. -* @reorder_work: work struct for reordering. * @num_obj: Number of objects that are processed by this cpu. * @cpu_index: Index of the cpu. */ struct padata_parallel_queue {struct padata_list parallel;struct padata_list reorder; -struct parallel_data *pd;struct work_struct work; -struct work_struct reorder_work;atomic_t num_obj;int cpu_index; };
@@ -122,10 +117,10 @@ struct padata_cpumask {* @reorder_objects: Number of objects waiting in the reorder queues. * @refcnt: Number of objects holding a reference on this parallel_data. * @max_seq_nr: Maximal used sequence number. +* @cpu: Next CPU to be processed. * @cpumask: The cpumasks in use for parallel and serial workers. +* @reorder_work: work struct for reordering. * @lock: Reorder lock. -* @processed: Number of already processed objects. -* @timer: Reorder timer. */ struct parallel_data {struct padata_instance *pinst;
@@ -134,10 +129,10 @@ struct parallel_data {atomic_t reorder_objects;atomic_t refcnt;atomic_t seq_nr; +int cpu;struct padata_cpumask cpumask; +struct work_struct reorder_work;spinlock_t lock____cacheline_aligned ; -unsigned int processed; -struct timer_list timer; };/**
kernel/padata.c +18 -77
191 lines not on this page · raw message
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 28/65 padata: initialize pd->cpu with effective cpumask
In reply to Greg Kroah-HartmanFrom: Daniel Jordan <[email protected]>
[ Upstream commit ec9c7d19336ee98ecba8de80128aa405c45feebb ]
Exercising CPU hotplug on a 5.2 kernel with recent padata fixes from cryptodev-2.6.git in an 8-CPU kvm guest...
# modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo c > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
# modprobe tcrypt mode=215...caused the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 134 Comm: kworker/2:2 Not tainted 5.2.0-padata-base+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-<snip>
Workqueue: pencrypt padata_parallel_worker
RIP: 0010:padata_reorder+0xcb/0x180
...
Call Trace:
padata_do_serial+0x57/0x60
pcrypt_aead_enc+0x3a/0x50 [pcrypt]
padata_parallel_worker+0x9b/0xe0
process_one_work+0x1b5/0x3f0
worker_thread+0x4a/0x3c0
...In padata_alloc_pd, pd->cpu is set using the user-supplied cpumask instead of the effective cpumask, and in this case cpumask_first picked an offline CPU.
The offline CPU's reorder->list.next is NULL in padata_reorder because the list wasn't initialized in padata_init_pqueues, which only operates on CPUs in the effective mask.
Fix by using the effective mask in padata_alloc_pd.
--- kernel/padata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/padata.c +1 -1
@@ -449,7 +449,7 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst,atomic_set (&pd->refcnt,1 ); pd->pinst = pinst;spin_lock_init (&pd->lock); - pd->cpu =cpumask_first (pcpumask); + pd->cpu =cpumask_first (pd->cpumask.pcpu);INIT_WORK (&pd->reorder_work, invoke_padata_reorder);return pd;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 29/65 padata: purge get_cpu and reorder_via_wq from padata_do_serial
In reply to Greg Kroah-HartmanFrom: Daniel Jordan <[email protected]>
[ Upstream commit 065cf577135a4977931c7a1e1edf442bfd9773dd]
With the removal of the padata timer, padata_do_serial no longer needs special CPU handling, so remove it.
--- kernel/padata.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-)
kernel/padata.c +3 -20
@@ -322,24 +322,9 @@ static void padata_serial_worker(struct work_struct *serial_work)*/ void padata_do_serial (struct padata_priv *padata) { -int cpu; -struct padata_parallel_queue *pqueue; -struct parallel_data *pd; -int reorder_via_wq =0 ; - - pd = padata->pd; - - cpu =get_cpu (); - -/* We need to enqueue the padata object into the correct -* per-cpu queue. -*/ -if (cpu != padata->cpu) { - reorder_via_wq =1 ; - cpu = padata->cpu; - } - - pqueue =per_cpu_ptr (pd->pqueue, cpu); +struct parallel_data *pd = padata->pd; +struct padata_parallel_queue *pqueue =per_cpu_ptr (pd->pqueue, + padata->cpu);spin_lock (&pqueue->reorder.lock);list_add_tail (&padata->list, &pqueue->reorder.list);
@@ -353,8 +338,6 @@ void padata_do_serial(struct padata_priv *padata)*/ smp_mb__after_atomic (); -put_cpu (); -padata_reorder (pd); }EXPORT_SYMBOL (padata_do_serial);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 30/65 ALSA: pcm: fix incorrect hw_base increase
In reply to Greg Kroah-HartmanFrom: Brent Lu <[email protected]>
commit e7513c5786f8b33f0c107b3759e433bc6cbb2efa upstream.
There is a corner case that ALSA keeps increasing the hw_ptr but DMA already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does not move at all but the hw_ptr got increased at some point of time so snd_pcm_avail() will return a large number which seems to be a buffer underrun event from user space program point of view. The program thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368 [ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554 ... [ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362 [ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0 [ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size frames unconditionally if the hw_ptr is not updated for over half of buffer time. As the hw_base increases, so does the hw_ptr increased by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit (buffer_size) easily becase the hw_ptr itself got increased by same buffer_size samples when the corner case happens. In following log, the buffer_size is 16368 samples but the avail is 21810 samples so CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442 [ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called, the hw_base will keep the same when buffer stall happens at long as the interval between each HWSYNC call is shorter than half of buffer time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr value is fixed in this corner case and user space program should be aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368 [ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584 [ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488 [ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392 [ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0 ... [ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
--- sound/core/pcm_lib.c | 1 + 1 file changed, 1 insertion(+)
sound/core/pcm_lib.c +1 -0
@@ -456,6 +456,7 @@ static int snd_pcm_update_hw_ptr0(struct no_delta_check:if (runtime->status->hw_ptr == new_hw_ptr) { + runtime->hw_ptr_jiffies = curr_jiffies;update_audio_tstamp (substream, &curr_tstamp, &audio_tstamp);return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 31/65 ext4: lock the xattr block before checksuming it
In reply to Greg Kroah-HartmanFrom: Theodore Ts'o <[email protected]>
commit dac7a4b4b1f664934e8b713f529b629f67db313c upstream.
We must lock the xattr block before calculating or verifying the checksum in order to avoid spurious checksum failures.
https://bugzilla.kernel.org/show_bug.cgi?id=193661
--- fs/ext4/xattr.c | 66 +++++++++++++++++++++++++++----------------------------- 1 file changed, 32 insertions(+), 34 deletions(-)
fs/ext4/xattr.c +32 -34
@@ -139,31 +139,26 @@ static __le32 ext4_xattr_block_csum(stru }static int ext4_xattr_block_csum_verify (struct inode *inode, -sector_t block_nr, -struct ext4_xattr_header *hdr) +struct buffer_head *bh) { -if (ext4_has_metadata_csum (inode->i_sb) && - (hdr->h_checksum !=ext4_xattr_block_csum (inode, block_nr, hdr))) -return 0 ; -return 1 ; -} - -static void ext4_xattr_block_csum_set (struct inode *inode, -sector_t block_nr, -struct ext4_xattr_header *hdr) -{ -if (!ext4_has_metadata_csum (inode->i_sb)) -return ; +struct ext4_xattr_header *hdr =BHDR (bh); +int ret =1 ; - hdr->h_checksum =ext4_xattr_block_csum (inode, block_nr, hdr); +if (ext4_has_metadata_csum (inode->i_sb)) { +lock_buffer (bh); + ret = (hdr->h_checksum ==ext4_xattr_block_csum (inode, + bh->b_blocknr, hdr)); +unlock_buffer (bh); + } +return ret; } -static inline int ext4_handle_dirty_xattr_block (handle_t *handle, -struct inode *inode, -struct buffer_head *bh) +static void ext4_xattr_block_csum_set (struct inode *inode, +struct buffer_head *bh) { -ext4_xattr_block_csum_set (inode, bh->b_blocknr,BHDR (bh)); -return ext4_handle_dirty_metadata (handle, inode, bh); +if (ext4_has_metadata_csum (inode->i_sb)) +BHDR (bh)->h_checksum =ext4_xattr_block_csum (inode, + bh->b_blocknr,BHDR (bh)); } static inline const struct xattr_handler *
@@ -226,7 +221,7 @@ ext4_xattr_check_block(struct inode *inoif (buffer_verified (bh))return 0 ; -if (!ext4_xattr_block_csum_verify (inode, bh->b_blocknr,BHDR (bh))) +if (!ext4_xattr_block_csum_verify (inode, bh))return -EFSBADCRC ; error =ext4_xattr_check_names (BFIRST (bh), bh->b_data + bh->b_size, bh->b_data);
@@ -590,23 +585,23 @@ ext4_xattr_release_block(handle_t *handlle32_add_cpu (&BHDR (bh)->h_refcount,-1 );if (ce)mb_cache_entry_release (ce); + +ext4_xattr_block_csum_set (inode, bh);/* * Beware of this ugliness: Releasing of xattr block references * from different inodes can race and so we have to protect * from a race where someone else frees the block (and releases * its journal_head) before we are done dirtying the buffer. In * nojournal mode this race is harmless and we actually cannot -* call ext4_handle_dirty_xattr_block() with locked buffer as +* call ext4_handle_dirty_metadata() with locked buffer as * that function can call sync_dirty_buffer() so for that case * we handle the dirtying after unlocking the buffer. */ if (ext4_handle_valid (handle)) - error =ext4_handle_dirty_xattr_block (handle, inode, - bh); + error =ext4_handle_dirty_metadata (handle, inode, bh);unlock_buffer (bh);if (!ext4_handle_valid (handle)) - error =ext4_handle_dirty_xattr_block (handle, inode, - bh); + error =ext4_handle_dirty_metadata (handle, inode, bh);if (IS_SYNC (inode))ext4_handle_sync (handle);dquot_free_block (inode,EXT4_C2B (EXT4_SB (inode->i_sb),1 ));
@@ -837,13 +832,14 @@ ext4_xattr_block_set(handle_t *handle, sext4_xattr_rehash (header (s->base), s->here); } +ext4_xattr_block_csum_set (inode, bs->bh);unlock_buffer (bs->bh);if (error == -EFSCORRUPTED ) goto bad_block;if (!error) - error =ext4_handle_dirty_xattr_block (handle, - inode, - bs->bh); + error =ext4_handle_dirty_metadata (handle, + inode, + bs->bh);if (error) goto cleanup; goto inserted;
@@ -912,10 +908,11 @@ inserted:le32_add_cpu (&BHDR (new_bh)->h_refcount,1 );ea_bdebug (new_bh,"reusing; refcount now=%d" ,le32_to_cpu (BHDR (new_bh)->h_refcount)); +ext4_xattr_block_csum_set (inode, new_bh);unlock_buffer (new_bh); - error =ext4_handle_dirty_xattr_block (handle, - inode, - new_bh); + error =ext4_handle_dirty_metadata (handle, + inode, + new_bh);if (error) goto cleanup_dquot; }
@@ -965,11 +962,12 @@ getblk_failed: goto getblk_failed; }memcpy (new_bh->b_data, s->base, new_bh->b_size); +ext4_xattr_block_csum_set (inode, new_bh);set_buffer_uptodate (new_bh);unlock_buffer (new_bh);ext4_xattr_cache_insert (ext4_mb_cache, new_bh); - error =ext4_handle_dirty_xattr_block (handle, - inode, new_bh); + error =ext4_handle_dirty_metadata (handle, inode, + new_bh);if (error) goto cleanup; }
Greg Kroah-Hartman
maintainerPATCH 32/65 platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer
In reply to Greg Kroah-HartmanFrom: Colin Ian King <[email protected]>
commit 98e2630284ab741804bd0713e932e725466f2f84 upstream.
Currently the kfree of output.pointer can be potentially freeing an uninitalized pointer in the case where out_data is NULL. Fix this by reworking the case where out_data is not-null to perform the ACPI status check and also the kfree of outpoint.pointer in one block and hence ensuring the pointer is only freed when it has been used.
Also replace the if (ptr != NULL) idiom with just if (ptr).
--- drivers/platform/x86/alienware-wmi.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/platform/x86/alienware-wmi.c +8 -9
@@ -449,23 +449,22 @@ static acpi_status alienware_hdmi_comman input.length = (acpi_size )sizeof (*in_args); input.pointer = in_args; -if (out_data !=NULL ) { +if (out_data) { output.length =ACPI_ALLOCATE_BUFFER ; output.pointer =NULL ; status =wmi_evaluate_method (WMAX_CONTROL_GUID ,1 , command, &input, &output); - }else +if (ACPI_SUCCESS (status)) { + obj = (union acpi_object *)output.pointer; +if (obj && obj->type ==ACPI_TYPE_INTEGER ) + *out_data = (u32 )obj->integer.value; + } +kfree (output.pointer); + }else { status =wmi_evaluate_method (WMAX_CONTROL_GUID ,1 , command, &input,NULL ); - -if (ACPI_SUCCESS (status) && out_data !=NULL ) { - obj = (union acpi_object *)output.pointer; -if (obj && obj->type ==ACPI_TYPE_INTEGER ) - *out_data = (u32 ) obj->integer.value; } -kfree (output.pointer);return status; - } static ssize_t show_hdmi_cable(struct device *dev,
Greg Kroah-Hartman
maintainerPATCH 33/65 libnvdimm/btt: Remove unnecessary code in btt_freelist_init
In reply to Greg Kroah-HartmanFrom: Vishal Verma <[email protected]>
[ Upstream commit 2f8c9011151337d0bc106693f272f9bddbccfab2 ]
We call btt_log_read() twice, once to get the 'old' log entry, and again to get the 'new' entry. However, we have no use for the 'old' entry, so remove it.
--- drivers/nvdimm/btt.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/nvdimm/btt.c +2 -6
@@ -443,9 +443,9 @@ static int btt_log_init(struct arena_info *arena)static int btt_freelist_init (struct arena_info *arena) { -int old, new, ret; +int new, ret;u32 i, map_entry; -struct log_entry log_new, log_old; +struct log_entry log_new; arena->freelist =kcalloc (arena->nfree,sizeof (struct free_entry ),GFP_KERNEL );
@@ -453,10 +453,6 @@ static int btt_freelist_init(struct arena_info *arena)return -ENOMEM ;for (i =0 ; i < arena->nfree; i++) { - old =btt_log_read (arena, i, &log_old,LOG_OLD_ENT ); -if (old <0 ) -return old; - new =btt_log_read (arena, i, &log_new,LOG_NEW_ENT );if (new <0 )return new;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 34/65 l2tp: lock socket before checking flags in connect()
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 0382a25af3c771a8e4d5e417d1834cbe28c2aaac upstream.
Socket flags aren't updated atomically, so the socket must be locked while reading the SOCK_ZAPPED flag.
This issue exists for both l2tp_ip and l2tp_ip6. For IPv6, this patch also brings error handling for __ip6_datagram_connect() failures.
--- include/net/ipv6.h | 2 ++ net/ipv6/datagram.c | 4 +++- net/l2tp/l2tp_ip.c | 19 ++++++++++++------- net/l2tp/l2tp_ip6.c | 16 +++++++++++----- 4 files changed, 28 insertions(+), 13 deletions(-)
include/net/ipv6.h +2 -0
@@ -915,6 +915,8 @@ int compat_ipv6_setsockopt(struct sock *int compat_ipv6_getsockopt (struct sock *sk,int level,int optname,char __user *optval,int __user *optlen); +int __ip6_datagram_connect (struct sock *sk,struct sockaddr *addr, +int addr_len);int ip6_datagram_connect (struct sock *sk,struct sockaddr *addr,int addr_len);int ip6_datagram_connect_v6_only (struct sock *sk,struct sockaddr *addr,int addr_len);
net/ipv6/datagram.c +3 -1
@@ -40,7 +40,8 @@ static bool ipv6_mapped_addr_any(const sreturn ipv6_addr_v4mapped (a) && (a->s6_addr32[3 ] ==0 ); } -static int __ip6_datagram_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len) +int __ip6_datagram_connect (struct sock *sk,struct sockaddr *uaddr, +int addr_len) {struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr;struct inet_sock *inet =inet_sk (sk);
@@ -213,6 +214,7 @@ out:fl6_sock_release (flowlabel);return err; } +EXPORT_SYMBOL_GPL (__ip6_datagram_connect);int ip6_datagram_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len) {
net/l2tp/l2tp_ip.c +12 -7
@@ -321,21 +321,24 @@ static int l2tp_ip_connect(struct sock *struct sockaddr_l2tpip *lsa = (struct sockaddr_l2tpip *) uaddr;int rc; -if (sock_flag (sk,SOCK_ZAPPED ))/* Must bind first - autobinding does not work */ -return -EINVAL ; -if (addr_len <sizeof (*lsa))return -EINVAL ;if (ipv4_is_multicast (lsa->l2tp_addr.s_addr))return -EINVAL ; - rc =ip4_datagram_connect (sk, uaddr, addr_len); -if (rc <0 ) -return rc; -lock_sock (sk); +/* Must bind first - autobinding does not work */ +if (sock_flag (sk,SOCK_ZAPPED )) { + rc = -EINVAL ; + goto out_sk; + } + + rc =__ip4_datagram_connect (sk, uaddr, addr_len); +if (rc <0 ) + goto out_sk; +l2tp_ip_sk (sk)->peer_conn_id = lsa->l2tp_conn_id;write_lock_bh (&l2tp_ip_lock);
@@ -343,7 +346,9 @@ static int l2tp_ip_connect(struct sock *sk_add_bind_node (sk, &l2tp_ip_bind_table);write_unlock_bh (&l2tp_ip_lock); +out_sk:release_sock (sk); +return rc; }
net/l2tp/l2tp_ip6.c +11 -5
@@ -383,9 +383,6 @@ static int l2tp_ip6_connect(struct sockint addr_type;int rc; -if (sock_flag (sk,SOCK_ZAPPED ))/* Must bind first - autobinding does not work */ -return -EINVAL ; -if (addr_len <sizeof (*lsa))return -EINVAL ;
@@ -402,10 +399,18 @@ static int l2tp_ip6_connect(struct sockreturn -EINVAL ; } - rc =ip6_datagram_connect (sk, uaddr, addr_len); -lock_sock (sk); +/* Must bind first - autobinding does not work */ +if (sock_flag (sk,SOCK_ZAPPED )) { + rc = -EINVAL ; + goto out_sk; + } + + rc =__ip6_datagram_connect (sk, uaddr, addr_len); +if (rc <0 ) + goto out_sk; +l2tp_ip6_sk (sk)->peer_conn_id = lsa->l2tp_conn_id;write_lock_bh (&l2tp_ip6_lock);
@@ -413,6 +418,7 @@ static int l2tp_ip6_connect(struct socksk_add_bind_node (sk, &l2tp_ip6_bind_table);write_unlock_bh (&l2tp_ip6_lock); +out_sk:release_sock (sk);return rc;
Greg Kroah-Hartman
maintainerPATCH 35/65 l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind()
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit d5e3a190937a1e386671266202c62565741f0f1a upstream.
It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again.
This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion.
Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets.
For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour.
For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value.
Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been
dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c).
--- net/l2tp/l2tp_ip.c | 27 ++++++++++++--------------- net/l2tp/l2tp_ip6.c | 43 ++++++++++++++++++++----------------------- 2 files changed, 32 insertions(+), 38 deletions(-)
net/l2tp/l2tp_ip.c +12 -15
@@ -269,15 +269,9 @@ static int l2tp_ip_bind(struct sock *sk,if (addr->l2tp_family !=AF_INET )return -EINVAL ; - ret = -EADDRINUSE ; -read_lock_bh (&l2tp_ip_lock); -if (__l2tp_ip_bind_lookup (net, addr->l2tp_addr.s_addr, - sk->sk_bound_dev_if, addr->l2tp_conn_id)) - goto out_in_use; - -read_unlock_bh (&l2tp_ip_lock); -lock_sock (sk); + + ret = -EINVAL ;if (!sock_flag (sk,SOCK_ZAPPED )) goto out;
@@ -294,14 +288,22 @@ static int l2tp_ip_bind(struct sock *sk, inet->inet_rcv_saddr = inet->inet_saddr = addr->l2tp_addr.s_addr;if (chk_addr_ret ==RTN_MULTICAST || chk_addr_ret ==RTN_BROADCAST ) inet->inet_saddr =0 ;/* Use device */ -sk_dst_reset (sk); +write_lock_bh (&l2tp_ip_lock); +if (__l2tp_ip_bind_lookup (net, addr->l2tp_addr.s_addr, + sk->sk_bound_dev_if, addr->l2tp_conn_id)) { +write_unlock_bh (&l2tp_ip_lock); + ret = -EADDRINUSE ; + goto out; + } + +sk_dst_reset (sk);l2tp_ip_sk (sk)->conn_id = addr->l2tp_conn_id; -write_lock_bh (&l2tp_ip_lock);sk_add_bind_node (sk, &l2tp_ip_bind_table);sk_del_node_init (sk);write_unlock_bh (&l2tp_ip_lock); + ret =0 ;sock_reset_flag (sk,SOCK_ZAPPED );
@@ -309,11 +311,6 @@ out:release_sock (sk);return ret; - -out_in_use: -read_unlock_bh (&l2tp_ip_lock); - -return ret; }static int l2tp_ip_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len)
net/l2tp/l2tp_ip6.c +20 -23
90 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 36/65 l2tp: hold session while sending creation notifications
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 5e6a9e5a3554a5b3db09cdc22253af1849c65dff upstream.
l2tp_session_find() doesn't take any reference on the returned session. Therefore, the session may disappear while sending the notification.
Use l2tp_session_get() instead and decrement session's refcount once the notification is sent.
Backporting Notes
This is a backport of a backport.
--- net/l2tp/l2tp_netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
net/l2tp/l2tp_netlink.c +4 -2
@@ -626,10 +626,12 @@ static int l2tp_nl_cmd_session_create(st session_id, peer_session_id, &cfg);if (ret >=0 ) { - session =l2tp_session_find (net, tunnel, session_id); -if (session) + session =l2tp_session_get (net, tunnel, session_id, false); +if (session) { ret =l2tp_session_notify (&l2tp_nl_family, info, session,L2TP_CMD_SESSION_CREATE ); +l2tp_session_dec_refcount (session); + } } out:
Greg Kroah-Hartman
maintainerPATCH 37/65 l2tp: take a reference on sessions used in genetlink handlers
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 2777e2ab5a9cf2b4524486c6db1517a6ded25261 upstream.
Callers of l2tp_nl_session_find() need to hold a reference on the returned session since there's no guarantee that it isn't going to disappear from under them.
Relying on the fact that no l2tp netlink message may be processed concurrently isn't enough: sessions can be deleted by other means (e.g. by closing the PPPOL2TP socket of a ppp pseudowire).
l2tp_nl_cmd_session_delete() is a bit special: it runs a callback function that may require a previous call to session->ref(). In particular, for ppp pseudowires, the callback is l2tp_session_delete(), which then calls pppol2tp_session_close() and dereferences the PPPOL2TP socket. The socket might already be gone at the moment l2tp_session_delete() calls session->ref(), so we need to take a reference during the session lookup. So we need to pass the do_ref variable down to l2tp_session_get() and l2tp_session_get_by_ifname().
Since all callers have to be updated, l2tp_session_find_by_ifname() and l2tp_nl_session_find() are renamed to reflect their new behaviour.
--- net/l2tp/l2tp_core.c | 9 +++++++-- net/l2tp/l2tp_core.h | 3 ++- net/l2tp/l2tp_netlink.c | 39 ++++++++++++++++++++++++++------------- 3 files changed, 35 insertions(+), 16 deletions(-)
net/l2tp/l2tp_core.c +7 -2
@@ -355,7 +355,8 @@ EXPORT_SYMBOL_GPL(l2tp_session_get_nth);/* Lookup a session by interface name. * This is very inefficient but is only used by management interfaces. */ -struct l2tp_session *l2tp_session_find_by_ifname (struct net *net,char *ifname) +struct l2tp_session *l2tp_session_get_by_ifname (struct net *net,char *ifname, +bool do_ref) {struct l2tp_net *pn =l2tp_pernet (net);int hash;
@@ -365,7 +366,11 @@ struct l2tp_session *l2tp_session_find_bfor (hash =0 ; hash <L2TP_HASH_SIZE_2 ; hash++) {hlist_for_each_entry_rcu (session, &pn->l2tp_session_hlist[hash], global_hlist) {if (!strcmp (session->ifname, ifname)) { +l2tp_session_inc_refcount (session); +if (do_ref && session->ref) + session->ref (session);rcu_read_unlock_bh (); +return session; } }
@@ -375,7 +380,7 @@ struct l2tp_session *l2tp_session_find_breturn NULL ; } -EXPORT_SYMBOL_GPL (l2tp_session_find_by_ifname); +EXPORT_SYMBOL_GPL (l2tp_session_get_by_ifname);static int l2tp_session_add_to_tunnel (struct l2tp_tunnel *tunnel,struct l2tp_session *session)
net/l2tp/l2tp_core.h +2 -1
@@ -252,7 +252,8 @@ struct l2tp_session *l2tp_session_find(s u32 session_id);struct l2tp_session *l2tp_session_get_nth (struct l2tp_tunnel *tunnel,int nth,bool do_ref); -struct l2tp_session *l2tp_session_find_by_ifname (struct net *net,char *ifname); +struct l2tp_session *l2tp_session_get_by_ifname (struct net *net,char *ifname, +bool do_ref);struct l2tp_tunnel *l2tp_tunnel_find (struct net *net,u32 tunnel_id);struct l2tp_tunnel *l2tp_tunnel_find_nth (struct net *net,int nth);
net/l2tp/l2tp_netlink.c +26 -13
@@ -55,7 +55,8 @@ static int l2tp_nl_session_send(struct s/* Accessed under genl lock */ static const struct l2tp_nl_cmd_ops *l2tp_nl_cmd_ops[__L2TP_PWTYPE_MAX]; -static struct l2tp_session *l2tp_nl_session_find (struct genl_info *info) +static struct l2tp_session *l2tp_nl_session_get (struct genl_info *info, +bool do_ref) {u32 tunnel_id;u32 session_id;
@@ -66,14 +67,15 @@ static struct l2tp_session *l2tp_nl_sessif (info->attrs[L2TP_ATTR_IFNAME ]) { ifname =nla_data (info->attrs[L2TP_ATTR_IFNAME ]); - session =l2tp_session_find_by_ifname (net, ifname); + session =l2tp_session_get_by_ifname (net, ifname, do_ref); }else if ((info->attrs[L2TP_ATTR_SESSION_ID ]) && (info->attrs[L2TP_ATTR_CONN_ID ])) { tunnel_id =nla_get_u32 (info->attrs[L2TP_ATTR_CONN_ID ]); session_id =nla_get_u32 (info->attrs[L2TP_ATTR_SESSION_ID ]); tunnel =l2tp_tunnel_find (net, tunnel_id);if (tunnel) - session =l2tp_session_find (net, tunnel, session_id); + session =l2tp_session_get (net, tunnel, session_id, + do_ref); }return session;
@@ -644,7 +646,7 @@ static int l2tp_nl_cmd_session_delete(ststruct l2tp_session *session;u16 pw_type; - session =l2tp_nl_session_find (info); + session =l2tp_nl_session_get (info, true);if (session ==NULL ) { ret = -ENODEV ; goto out;
@@ -658,6 +660,10 @@ static int l2tp_nl_cmd_session_delete(stif (l2tp_nl_cmd_ops[pw_type] && l2tp_nl_cmd_ops[pw_type]->session_delete) ret = (*l2tp_nl_cmd_ops[pw_type]->session_delete)(session); +if (session->deref) + session->deref (session); +l2tp_session_dec_refcount (session); + out:return ret; }
@@ -667,7 +673,7 @@ static int l2tp_nl_cmd_session_modify(stint ret =0 ;struct l2tp_session *session; - session =l2tp_nl_session_find (info); + session =l2tp_nl_session_get (info, false);if (session ==NULL ) { ret = -ENODEV ; goto out;
@@ -702,6 +708,8 @@ static int l2tp_nl_cmd_session_modify(st ret =l2tp_session_notify (&l2tp_nl_family, info, session,L2TP_CMD_SESSION_MODIFY ); +l2tp_session_dec_refcount (session); + out:return ret; }
@@ -788,29 +796,34 @@ static int l2tp_nl_cmd_session_get(strucstruct sk_buff *msg;int ret; - session =l2tp_nl_session_find (info); + session =l2tp_nl_session_get (info, false);if (session ==NULL ) { ret = -ENODEV ; - goto out; + goto err; } msg =nlmsg_new (NLMSG_DEFAULT_SIZE ,GFP_KERNEL );if (!msg) { ret = -ENOMEM ; - goto out; + goto err_ref; } ret =l2tp_nl_session_send (msg, info->snd_portid, info->snd_seq,0 , session,L2TP_CMD_SESSION_GET );if (ret <0 ) - goto err_out; + goto err_ref_msg; -return genlmsg_unicast (genl_info_net (info), msg, info->snd_portid); + ret =genlmsg_unicast (genl_info_net (info), msg, info->snd_portid); -err_out: -nlmsg_free (msg); +l2tp_session_dec_refcount (session); -out: +return ret; + +err_ref_msg: +nlmsg_free (msg); +err_ref: +l2tp_session_dec_refcount (session); +err:return ret; }
Greg Kroah-Hartman
maintainerPATCH 38/65 l2tp: dont use l2tp_tunnel_find() in l2tp_ip and l2tp_ip6
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 8f7dc9ae4a7aece9fbc3e6637bdfa38b36bcdf09 upstream.
Using l2tp_tunnel_find() in l2tp_ip_recv() is wrong for two reasons:
* It doesn't take a reference on the returned tunnel, which makes the call racy wrt. concurrent tunnel deletion.
* The lookup is only based on the tunnel identifier, so it can return a tunnel that doesn't match the packet's addresses or protocol.
For example, a packet sent to an L2TPv3 over IPv6 tunnel can be delivered to an L2TPv2 over UDPv4 tunnel. This is worse than a simple
cross-talk: when delivering the packet to an L2TP over UDP tunnel, the corresponding socket is UDP, where ->sk_backlog_rcv() is NULL. Calling sk_receive_skb() will then crash the kernel by trying to execute this callback.
And l2tp_tunnel_find() isn't even needed here. __l2tp_ip_bind_lookup() properly checks the socket binding and connection settings. It was used as a fallback mechanism for finding tunnels that didn't have their data path registered yet. But it's not limited to this case and can be used to replace l2tp_tunnel_find() in the general case.
Fix l2tp_ip6 in the same way.
--- net/l2tp/l2tp_ip.c | 22 ++++++++-------------- net/l2tp/l2tp_ip6.c | 23 ++++++++--------------- 2 files changed, 16 insertions(+), 29 deletions(-)
net/l2tp/l2tp_ip.c +8 -14
@@ -122,6 +122,7 @@ static int l2tp_ip_recv(struct sk_buff *unsigned char *ptr, *optr;struct l2tp_session *session;struct l2tp_tunnel *tunnel =NULL ; +struct iphdr *iph;int length;if (!pskb_may_pull (skb,4 ))
@@ -180,23 +181,16 @@ pass_up: goto discard; tunnel_id =ntohl (*(__be32 *) &skb->data[4 ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (tunnel) { - sk = tunnel->sock; -sock_hold (sk); - }else { -struct iphdr *iph = (struct iphdr *)skb_network_header (skb); - -read_lock_bh (&l2tp_ip_lock); - sk =__l2tp_ip_bind_lookup (net, iph->daddr,0 , tunnel_id); -if (!sk) { -read_unlock_bh (&l2tp_ip_lock); - goto discard; - } + iph = (struct iphdr *)skb_network_header (skb); -sock_hold (sk); +read_lock_bh (&l2tp_ip_lock); + sk =__l2tp_ip_bind_lookup (net, iph->daddr,0 , tunnel_id); +if (!sk) {read_unlock_bh (&l2tp_ip_lock); + goto discard; } +sock_hold (sk); +read_unlock_bh (&l2tp_ip_lock);if (!xfrm4_policy_check (sk,XFRM_POLICY_IN , skb)) goto discard_put;
net/l2tp/l2tp_ip6.c +8 -15
@@ -134,6 +134,7 @@ static int l2tp_ip6_recv(struct sk_buffunsigned char *ptr, *optr;struct l2tp_session *session;struct l2tp_tunnel *tunnel =NULL ; +struct ipv6hdr *iph;int length;if (!pskb_may_pull (skb,4 ))
@@ -193,24 +194,16 @@ pass_up: goto discard; tunnel_id =ntohl (*(__be32 *) &skb->data[4 ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (tunnel) { - sk = tunnel->sock; -sock_hold (sk); - }else { -struct ipv6hdr *iph =ipv6_hdr (skb); - -read_lock_bh (&l2tp_ip6_lock); - sk =__l2tp_ip6_bind_lookup (net, &iph->daddr, -0 , tunnel_id); -if (!sk) { -read_unlock_bh (&l2tp_ip6_lock); - goto discard; - } + iph =ipv6_hdr (skb); -sock_hold (sk); +read_lock_bh (&l2tp_ip6_lock); + sk =__l2tp_ip6_bind_lookup (net, &iph->daddr,0 , tunnel_id); +if (!sk) {read_unlock_bh (&l2tp_ip6_lock); + goto discard; } +sock_hold (sk); +read_unlock_bh (&l2tp_ip6_lock);if (!xfrm6_policy_check (sk,XFRM_POLICY_IN , skb)) goto discard_put;
Greg Kroah-Hartman
maintainerPATCH 39/65 net: l2tp: export debug flags to UAPI
In reply to Greg Kroah-HartmanFrom: Asbj�rn Sloth T�nnesen <[email protected]>
commit 41c43fbee68f4f9a2a9675d83bca91c77862d7f0 upstream.
Move the L2TP_MSG_* definitions to UAPI, as it is part of the netlink API.
--- include/uapi/linux/l2tp.h | 17 ++++++++++++++++- net/l2tp/l2tp_core.h | 10 ---------- 2 files changed, 16 insertions(+), 11 deletions(-)
include/uapi/linux/l2tp.h +16 -1
@@ -108,7 +108,7 @@ enum {L2TP_ATTR_VLAN_ID ,/* u16 */ L2TP_ATTR_COOKIE ,/* 0, 4 or 8 bytes */ L2TP_ATTR_PEER_COOKIE ,/* 0, 4 or 8 bytes */ -L2TP_ATTR_DEBUG ,/* u32 */ +L2TP_ATTR_DEBUG ,/* u32, enum l2tp_debug_flags */ L2TP_ATTR_RECV_SEQ ,/* u8 */ L2TP_ATTR_SEND_SEQ ,/* u8 */ L2TP_ATTR_LNS_MODE, /* u8 */
@@ -173,6 +173,21 @@ enum l2tp_seqmode { L2TP_SEQ_ALL = 2, }; +/** +* enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions +* +* @L2TP_MSG_DEBUG: verbose debug (if compiled in) +* @L2TP_MSG_CONTROL: userspace - kernel interface +* @L2TP_MSG_SEQ: sequence numbers +* @L2TP_MSG_DATA: data packets +*/ +enum l2tp_debug_flags { +L2TP_MSG_DEBUG = (1 <<0 ), +L2TP_MSG_CONTROL = (1 <<1 ), +L2TP_MSG_SEQ = (1 <<2 ), +L2TP_MSG_DATA = (1 <<3 ), +}; +/* * NETLINK_GENERIC related info */
net/l2tp/l2tp_core.h +0 -10
@@ -23,16 +23,6 @@#define L2TP_HASH_BITS_2 8#define L2TP_HASH_SIZE_2 (1 << L2TP_HASH_BITS_2) -/* Debug message categories for the DEBUG socket option */ -enum { -L2TP_MSG_DEBUG = (1 <<0 ),/* verbose debug (if -* compiled in) */ -L2TP_MSG_CONTROL = (1 <<1 ),/* userspace - kernel -* interface */ -L2TP_MSG_SEQ = (1 <<2 ),/* sequence numbers */ -L2TP_MSG_DATA = (1 <<3 ),/* data packets */ -}; -struct sk_buff ;struct l2tp_stats {
Greg Kroah-Hartman
maintainerPATCH 40/65 net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*
In reply to Greg Kroah-HartmanFrom: Asbj�rn Sloth T�nnesen <[email protected]>
commit 47c3e7783be4e142b861d34b5c2e223330b05d8a upstream.
PPPOL2TP_MSG_* and L2TP_MSG_* are duplicates, and are being used interchangeably in the kernel, so let's standardize on L2TP_MSG_* internally, and keep PPPOL2TP_MSG_* defined in UAPI for compatibility.
--- Documentation/networking/l2tp.txt | 8 ++++---- include/uapi/linux/if_pppol2tp.h | 13 ++++++------- 2 files changed, 10 insertions(+), 11 deletions(-)
Documentation/networking/l2tp.txt +4 -4
@@ -177,10 +177,10 @@ setsockopt on the PPPoX socket to set a The following debug mask bits are available: -PPPOL2TP_MSG_DEBUG verbose debug (if compiled in) -PPPOL2TP_MSG_CONTROL userspace - kernel interface -PPPOL2TP_MSG_SEQ sequence numbers handling -PPPOL2TP_MSG_DATA data packets +L2TP_MSG_DEBUG verbose debug (if compiled in) +L2TP_MSG_CONTROL userspace - kernel interface +L2TP_MSG_SEQ sequence numbers handling +L2TP_MSG_DATA data packets If enabled, files under a l2tp debugfs directory can be used to dump kernel state about L2TP tunnels and sessions. To access it, the
include/uapi/linux/if_pppol2tp.h +6 -7
@@ -17,6 +17,7 @@#include <linux/types.h> +#include <linux/l2tp.h> /* Structure used to connect() the socket to a particular tunnel UDP * socket over IPv4.
@@ -89,14 +90,12 @@ enum { PPPOL2TP_SO_REORDERTO = 5, }; -/* Debug message categories for the DEBUG socket option */ +/* Debug message categories for the DEBUG socket option (deprecated) */ enum { -PPPOL2TP_MSG_DEBUG = (1 <<0 ),/* verbose debug (if -* compiled in) */ -PPPOL2TP_MSG_CONTROL = (1 <<1 ),/* userspace - kernel -* interface */ -PPPOL2TP_MSG_SEQ = (1 <<2 ),/* sequence numbers */ -PPPOL2TP_MSG_DATA = (1 <<3 ),/* data packets */ +PPPOL2TP_MSG_DEBUG =L2TP_MSG_DEBUG , +PPPOL2TP_MSG_CONTROL =L2TP_MSG_CONTROL , +PPPOL2TP_MSG_SEQ =L2TP_MSG_SEQ , +PPPOL2TP_MSG_DATA =L2TP_MSG_DATA , };
Greg Kroah-Hartman
maintainerPATCH 41/65 net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*
In reply to Greg Kroah-HartmanFrom: Asbj�rn Sloth T�nnesen <[email protected]>
commit fba40c632c6473fa89660e870a6042c0fe733f8c upstream.
--- net/l2tp/l2tp_ppp.c | 54 ++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 27 deletions(-)
net/l2tp/l2tp_ppp.c +27 -27
@@ -230,7 +230,7 @@ static void pppol2tp_recv(struct l2tp_seif (sk->sk_state &PPPOX_BOUND ) {struct pppox_sock *po; -l2tp_dbg (session,PPPOL2TP_MSG_DATA , +l2tp_dbg (session,L2TP_MSG_DATA ,"%s: recv %d byte data frame, passing to ppp\n" , session->name, data_len);
@@ -253,7 +253,7 @@ static void pppol2tp_recv(struct l2tp_se po =pppox_sk (sk);ppp_input (&po->chan, skb); }else { -l2tp_dbg (session,PPPOL2TP_MSG_DATA , +l2tp_dbg (session,L2TP_MSG_DATA ,"%s: recv %d byte data frame, passing to L2TP socket\n" , session->name, data_len);
@@ -266,7 +266,7 @@ static void pppol2tp_recv(struct l2tp_sereturn ; no_sock: -l2tp_info (session,PPPOL2TP_MSG_DATA ,"%s: no socket\n" , session->name); +l2tp_info (session,L2TP_MSG_DATA ,"%s: no socket\n" , session->name);kfree_skb (skb); }
@@ -797,7 +797,7 @@ out_no_ppp:/* This is how we get the session context from the socket. */ sk->sk_user_data = session; sk->sk_state =PPPOX_CONNECTED ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: created\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: created\n" , session->name); end:
@@ -848,7 +848,7 @@ static int pppol2tp_session_create(struc ps =l2tp_session_priv (session); ps->tunnel_sock = tunnel->sock; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: created\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: created\n" , session->name); error =0 ;
@@ -1010,7 +1010,7 @@ static int pppol2tp_session_ioctl(structstruct l2tp_tunnel *tunnel = session->tunnel;struct pppol2tp_ioc_stats stats; -l2tp_dbg (session,PPPOL2TP_MSG_CONTROL , +l2tp_dbg (session,L2TP_MSG_CONTROL ,"%s: pppol2tp_session_ioctl(cmd=%#x, arg=%#lx)\n" , session->name, cmd, arg);
@@ -1033,7 +1033,7 @@ static int pppol2tp_session_ioctl(structif (copy_to_user ((void __user *) arg, &ifr,sizeof (struct ifreq )))break ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: get mtu=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get mtu=%d\n" , session->name, session->mtu); err =0 ;break ;
@@ -1049,7 +1049,7 @@ static int pppol2tp_session_ioctl(struct session->mtu = ifr.ifr_mtu; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: set mtu=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set mtu=%d\n" , session->name, session->mtu); err =0 ;break ;
@@ -1063,7 +1063,7 @@ static int pppol2tp_session_ioctl(structif (put_user (session->mru, (int __user *) arg))break ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: get mru=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get mru=%d\n" , session->name, session->mru); err =0 ;break ;
@@ -1078,7 +1078,7 @@ static int pppol2tp_session_ioctl(structbreak ; session->mru = val; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: set mru=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set mru=%d\n" , session->name, session->mru); err =0 ;break ;
@@ -1088,7 +1088,7 @@ static int pppol2tp_session_ioctl(structif (put_user (ps->flags, (int __user *) arg))break ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: get flags=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get flags=%d\n" , session->name, ps->flags); err =0 ;break ;
@@ -1098,7 +1098,7 @@ static int pppol2tp_session_ioctl(structif (get_user (val, (int __user *) arg))break ; ps->flags = val; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: set flags=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set flags=%d\n" , session->name, ps->flags); err =0 ;break ;
@@ -1115,7 +1115,7 @@ static int pppol2tp_session_ioctl(structif (copy_to_user ((void __user *) arg, &stats,sizeof (stats)))break ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: get L2TP stats\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get L2TP stats\n" , session->name); err =0 ;break ;
@@ -1143,7 +1143,7 @@ static int pppol2tp_tunnel_ioctl(structstruct sock *sk;struct pppol2tp_ioc_stats stats; -l2tp_dbg (tunnel,PPPOL2TP_MSG_CONTROL , +l2tp_dbg (tunnel,L2TP_MSG_CONTROL ,"%s: pppol2tp_tunnel_ioctl(cmd=%#x, arg=%#lx)\n" , tunnel->name, cmd, arg);
@@ -1186,7 +1186,7 @@ static int pppol2tp_tunnel_ioctl(struct err = -EFAULT ;break ; } -l2tp_info (tunnel,PPPOL2TP_MSG_CONTROL ,"%s: get L2TP stats\n" , +l2tp_info (tunnel,L2TP_MSG_CONTROL ,"%s: get L2TP stats\n" , tunnel->name); err =0 ;break ;
@@ -1276,7 +1276,7 @@ static int pppol2tp_tunnel_setsockopt(stswitch (optname) {case PPPOL2TP_SO_DEBUG : tunnel->debug = val; -l2tp_info (tunnel,PPPOL2TP_MSG_CONTROL ,"%s: set debug=%x\n" , +l2tp_info (tunnel,L2TP_MSG_CONTROL ,"%s: set debug=%x\n" , tunnel->name, tunnel->debug);break ;
@@ -1304,7 +1304,7 @@ static int pppol2tp_session_setsockopt(sbreak ; } session->recv_seq = val ?-1 :0 ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set recv_seq=%d\n" , session->name, session->recv_seq);break ;
@@ -1322,7 +1322,7 @@ static int pppol2tp_session_setsockopt(sPPPOL2TP_L2TP_HDR_SIZE_NOSEQ ; }l2tp_session_set_header_len (session, session->tunnel->version); -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set send_seq=%d\n" , session->name, session->send_seq);break ;
@@ -1333,20 +1333,20 @@ static int pppol2tp_session_setsockopt(sbreak ; } session->lns_mode = val ?-1 :0 ; -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set lns_mode=%d\n" , session->name, session->lns_mode);break ;case PPPOL2TP_SO_DEBUG : session->debug = val; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: set debug=%x\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set debug=%x\n" , session->name, session->debug);break ;case PPPOL2TP_SO_REORDERTO : session->reorder_timeout =msecs_to_jiffies (val); -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: set reorder_timeout=%d\n" , session->name, session->reorder_timeout);break ;
@@ -1427,7 +1427,7 @@ static int pppol2tp_tunnel_getsockopt(stswitch (optname) {case PPPOL2TP_SO_DEBUG : *val = tunnel->debug; -l2tp_info (tunnel,PPPOL2TP_MSG_CONTROL ,"%s: get debug=%x\n" , +l2tp_info (tunnel,L2TP_MSG_CONTROL ,"%s: get debug=%x\n" , tunnel->name, tunnel->debug);break ;
@@ -1450,31 +1450,31 @@ static int pppol2tp_session_getsockopt(sswitch (optname) {case PPPOL2TP_SO_RECVSEQ : *val = session->recv_seq; -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get recv_seq=%d\n" , session->name, *val);break ;case PPPOL2TP_SO_SENDSEQ : *val = session->send_seq; -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get send_seq=%d\n" , session->name, *val);break ;case PPPOL2TP_SO_LNSMODE : *val = session->lns_mode; -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get lns_mode=%d\n" , session->name, *val);break ;case PPPOL2TP_SO_DEBUG : *val = session->debug; -l2tp_info (session,PPPOL2TP_MSG_CONTROL ,"%s: get debug=%d\n" , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get debug=%d\n" , session->name, *val);break ;case PPPOL2TP_SO_REORDERTO : *val = (int )jiffies_to_msecs (session->reorder_timeout); -l2tp_info (session,PPPOL2TP_MSG_CONTROL , +l2tp_info (session,L2TP_MSG_CONTROL ,"%s: get reorder_timeout=%d\n" , session->name, *val);break ;
Greg Kroah-Hartman
maintainerPATCH 42/65 New kernel function to get IP overhead on a socket.
In reply to Greg Kroah-HartmanFrom: "R. Parameswaran" <[email protected]>
commit 113c3075931a334f899008f6c753abe70a3a9323 upstream.
A new function, kernel_sock_ip_overhead(), is provided to calculate the cumulative overhead imposed by the IP Header and IP options, if any, on a socket's payload. The new function returns an overhead of zero for sockets that do not belong to the IPv4 or IPv6 address families. This is used in the L2TP code path to compute the total outer IP overhead on the L2TP tunnel socket when calculating the default MTU for Ethernet pseudowires.
--- include/linux/net.h | 3 +++ net/socket.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+)
include/linux/net.h +3 -0
@@ -291,6 +291,9 @@ int kernel_sendpage(struct socket *sock,int kernel_sock_ioctl (struct socket *sock,int cmd,unsigned long arg);int kernel_sock_shutdown (struct socket *sock,enum sock_shutdown_cmd how); +/* Following routine returns the IP overhead imposed by a socket. */ +u32 kernel_sock_ip_overhead (struct sock *sk); +#define MODULE_ALIAS_NETPROTO (proto) \ MODULE_ALIAS("net-pf-" __stringify(proto))
net/socket.c +46 -0
49 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 43/65 L2TP:Adjust intf MTU, add underlay L3, L2 hdrs.
In reply to Greg Kroah-HartmanFrom: "R. Parameswaran" <[email protected]>
commit b784e7ebfce8cfb16c6f95e14e8532d0768ab7ff upstream.
Existing L2TP kernel code does not derive the optimal MTU for Ethernet pseudowires and instead leaves this to a userspace L2TP daemon or operator. If an MTU is not specified, the existing kernel code chooses an MTU that does not take account of all tunnel header overheads, which can lead to unwanted IP fragmentation. When L2TP is used without a control plane (userspace daemon), we would prefer that the kernel does a better job of choosing a default pseudowire MTU, taking account of all tunnel header overheads, including IP header options, if any. This patch addresses this.
Change-set here uses the new kernel function, kernel_sock_ip_overhead(), to factor the outer IP overhead on the L2TP tunnel socket (including IP Options, if any) when calculating the default MTU for an Ethernet pseudowire, along with consideration of the inner Ethernet header.
--- net/l2tp/l2tp_eth.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 51 insertions(+), 4 deletions(-)
net/l2tp/l2tp_eth.c +51 -4
@@ -30,6 +30,9 @@#include <net/xfrm.h> #include <net/net_namespace.h> #include <net/netns/generic.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/udp.h> #include "l2tp_core.h"
@@ -206,6 +209,53 @@ static void l2tp_eth_show(struct seq_fil }#endif +static void l2tp_eth_adjust_mtu (struct l2tp_tunnel *tunnel, +struct l2tp_session *session, +struct net_device *dev) +{ +unsigned int overhead =0 ; +struct dst_entry *dst; +u32 l3_overhead =0 ; + +/* if the encap is UDP, account for UDP header size */ +if (tunnel->encap ==L2TP_ENCAPTYPE_UDP ) { + overhead +=sizeof (struct udphdr ); + dev->needed_headroom +=sizeof (struct udphdr ); + } +if (session->mtu !=0 ) { + dev->mtu = session->mtu; + dev->needed_headroom += session->hdr_len; +return ; + } + l3_overhead =kernel_sock_ip_overhead (tunnel->sock); +if (l3_overhead ==0 ) { +/* L3 Overhead couldn't be identified, this could be +* because tunnel->sock was NULL or the socket's +* address family was not IPv4 or IPv6, +* dev mtu stays at 1500. +*/ +return ; + } +/* Adjust MTU, factor overhead - underlay L3, overlay L2 hdr +* UDP overhead, if any, was already factored in above. +*/ + overhead += session->hdr_len +ETH_HLEN + l3_overhead; + +/* If PMTU discovery was enabled, use discovered MTU on L2TP device */ + dst =sk_dst_get (tunnel->sock); +if (dst) { +/* dst_mtu will use PMTU if found, else fallback to intf MTU */ +u32 pmtu =dst_mtu (dst); + +if (pmtu !=0 ) + dev->mtu = pmtu; +dst_release (dst); + } + session->mtu = dev->mtu - overhead; + dev->mtu = session->mtu; + dev->needed_headroom += session->hdr_len; +} +static int l2tp_eth_create (struct net *net,u32 tunnel_id,u32 session_id,u32 peer_session_id,struct l2tp_session_cfg *cfg) {struct net_device *dev;
@@ -249,10 +299,7 @@ static int l2tp_eth_create(struct net *n }dev_net_set (dev, net); -if (session->mtu ==0 ) - session->mtu = dev->mtu - session->hdr_len; - dev->mtu = session->mtu; - dev->needed_headroom += session->hdr_len; +l2tp_eth_adjust_mtu (tunnel, session, dev); priv =netdev_priv (dev); priv->dev = dev;
Greg Kroah-Hartman
maintainerPATCH 44/65 l2tp: remove useless duplicate session detection in l2tp_netlink
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit af87ae465abdc070de0dc35d6c6a9e7a8cd82987 upstream.
There's no point in checking for duplicate sessions at the beginning of l2tp_nl_cmd_session_create(); the ->session_create() callbacks already return -EEXIST when the session already exists.
Furthermore, even if l2tp_session_find() returns NULL, a new session might be created right after the test. So relying on ->session_create() to avoid duplicate session is the only sane behaviour.
--- net/l2tp/l2tp_netlink.c | 5 ----- 1 file changed, 5 deletions(-)
net/l2tp/l2tp_netlink.c +0 -5
@@ -505,11 +505,6 @@ static int l2tp_nl_cmd_session_create(st goto out; } session_id =nla_get_u32 (info->attrs[L2TP_ATTR_SESSION_ID ]); - session =l2tp_session_find (net, tunnel, session_id); -if (session) { - ret = -EEXIST ; - goto out; - }if (!info->attrs[L2TP_ATTR_PEER_SESSION_ID ]) { ret = -EINVAL ;
Greg Kroah-Hartman
maintainerPATCH 45/65 l2tp: remove l2tp_session_find()
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 55a3ce3b9d98f752df9e2cfb1cba7e715522428a upstream.
This function isn't used anymore.
--- net/l2tp/l2tp_core.c | 51 +-------------------------------------------------- net/l2tp/l2tp_core.h | 3 --- 2 files changed, 1 insertion(+), 53 deletions(-)
net/l2tp/l2tp_core.c +1 -50
@@ -216,27 +216,6 @@ static void l2tp_tunnel_sock_put(structsock_put (sk); } -/* Lookup a session by id in the global session list -*/ -static struct l2tp_session *l2tp_session_find_2 (struct net *net,u32 session_id) -{ -struct l2tp_net *pn =l2tp_pernet (net); -struct hlist_head *session_list = -l2tp_session_id_hash_2 (pn, session_id); -struct l2tp_session *session; - -rcu_read_lock_bh (); -hlist_for_each_entry_rcu (session, session_list, global_hlist) { -if (session->session_id == session_id) { -rcu_read_unlock_bh (); -return session; - } - } -rcu_read_unlock_bh (); - -return NULL ; -} -/* Session hash list. * The session_id SHOULD be random according to RFC2661, but several * L2TP implementations (Cisco and Microsoft) use incrementing
@@ -249,35 +228,7 @@ l2tp_session_id_hash(struct l2tp_tunnelreturn &tunnel->session_hlist[hash_32 (session_id,L2TP_HASH_BITS )]; } -/* Lookup a session by id -*/ -struct l2tp_session *l2tp_session_find (struct net *net,struct l2tp_tunnel *tunnel,u32 session_id) -{ -struct hlist_head *session_list; -struct l2tp_session *session; - -/* In L2TPv3, session_ids are unique over all tunnels and we -* sometimes need to look them up before we know the -* tunnel. -*/ -if (tunnel ==NULL ) -return l2tp_session_find_2 (net, session_id); - - session_list =l2tp_session_id_hash (tunnel, session_id); -read_lock_bh (&tunnel->hlist_lock); -hlist_for_each_entry (session, session_list, hlist) { -if (session->session_id == session_id) { -read_unlock_bh (&tunnel->hlist_lock); -return session; - } - } -read_unlock_bh (&tunnel->hlist_lock); - -return NULL ; -} -EXPORT_SYMBOL_GPL (l2tp_session_find); - -/* Like l2tp_session_find() but takes a reference on the returned session. +/* Lookup a session. A new reference is held on the returned session. * Optionally calls session->ref() too if do_ref is true. */ struct l2tp_session *l2tp_session_get(struct net *net,
net/l2tp/l2tp_core.h +0 -3
@@ -237,9 +237,6 @@ out:struct l2tp_session *l2tp_session_get (struct net *net,struct l2tp_tunnel *tunnel,u32 session_id,bool do_ref); -struct l2tp_session *l2tp_session_find (struct net *net, -struct l2tp_tunnel *tunnel, -u32 session_id);struct l2tp_session *l2tp_session_get_nth (struct l2tp_tunnel *tunnel,int nth,bool do_ref); struct l2tp_session *l2tp_session_get_by_ifname(struct net *net, char *ifname,
Greg Kroah-Hartman
maintainerPATCH 46/65 l2tp: define parameters of l2tp_session_get*() as "const"
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 9aaef50c44f132e040dcd7686c8e78a3390037c5 upstream.
Make l2tp_pernet()'s parameter constant, so that l2tp_session_get*() can declare their "net" variable as "const".
Also constify "ifname" in l2tp_session_get_by_ifname().
--- net/l2tp/l2tp_core.c | 7 ++++--- net/l2tp/l2tp_core.h | 5 +++-- 2 files changed, 7 insertions(+), 5 deletions(-)
net/l2tp/l2tp_core.c +4 -3
@@ -119,7 +119,7 @@ static inline struct l2tp_tunnel *l2tp_treturn sk->sk_user_data; } -static inline struct l2tp_net *l2tp_pernet (struct net *net) +static inline struct l2tp_net *l2tp_pernet (const struct net *net) {BUG_ON (!net);
@@ -231,7 +231,7 @@ l2tp_session_id_hash(struct l2tp_tunnel/* Lookup a session. A new reference is held on the returned session. * Optionally calls session->ref() too if do_ref is true. */ -struct l2tp_session *l2tp_session_get (struct net *net, +struct l2tp_session *l2tp_session_get (const struct net *net,struct l2tp_tunnel *tunnel,u32 session_id,bool do_ref) {
@@ -306,7 +306,8 @@ EXPORT_SYMBOL_GPL(l2tp_session_get_nth);/* Lookup a session by interface name. * This is very inefficient but is only used by management interfaces. */ -struct l2tp_session *l2tp_session_get_by_ifname (struct net *net,char *ifname, +struct l2tp_session *l2tp_session_get_by_ifname (const struct net *net, +const char *ifname,bool do_ref) {struct l2tp_net *pn =l2tp_pernet (net);
net/l2tp/l2tp_core.h +3 -2
@@ -234,12 +234,13 @@ out:return tunnel; } -struct l2tp_session *l2tp_session_get (struct net *net, +struct l2tp_session *l2tp_session_get (const struct net *net,struct l2tp_tunnel *tunnel,u32 session_id,bool do_ref);struct l2tp_session *l2tp_session_get_nth (struct l2tp_tunnel *tunnel,int nth,bool do_ref); -struct l2tp_session *l2tp_session_get_by_ifname (struct net *net,char *ifname, +struct l2tp_session *l2tp_session_get_by_ifname (const struct net *net, +const char *ifname,bool do_ref);struct l2tp_tunnel *l2tp_tunnel_find (struct net *net,u32 tunnel_id);struct l2tp_tunnel *l2tp_tunnel_find_nth (struct net *net,int nth);
Greg Kroah-Hartman
maintainerPATCH 47/65 l2tp: define parameters of l2tp_tunnel_find*() as "const"
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 2f858b928bf5a8174911aaec76b8b72a9ca0533d upstream.
l2tp_tunnel_find() and l2tp_tunnel_find_nth() don't modify "net".
--- net/l2tp/l2tp_core.c | 4 ++-- net/l2tp/l2tp_core.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
net/l2tp/l2tp_core.c +2 -2
@@ -378,7 +378,7 @@ exist:/* Lookup a tunnel by id */ -struct l2tp_tunnel *l2tp_tunnel_find (struct net *net,u32 tunnel_id) +struct l2tp_tunnel *l2tp_tunnel_find (const struct net *net,u32 tunnel_id) {struct l2tp_tunnel *tunnel;struct l2tp_net *pn =l2tp_pernet (net);
@@ -396,7 +396,7 @@ struct l2tp_tunnel *l2tp_tunnel_find(str }EXPORT_SYMBOL_GPL (l2tp_tunnel_find); -struct l2tp_tunnel *l2tp_tunnel_find_nth (struct net *net,int nth) +struct l2tp_tunnel *l2tp_tunnel_find_nth (const struct net *net,int nth) {struct l2tp_net *pn =l2tp_pernet (net);struct l2tp_tunnel *tunnel;
net/l2tp/l2tp_core.h +2 -2
@@ -242,8 +242,8 @@ struct l2tp_session *l2tp_session_get_ntstruct l2tp_session *l2tp_session_get_by_ifname (const struct net *net,const char *ifname,bool do_ref); -struct l2tp_tunnel *l2tp_tunnel_find (struct net *net,u32 tunnel_id); -struct l2tp_tunnel *l2tp_tunnel_find_nth (struct net *net,int nth); +struct l2tp_tunnel *l2tp_tunnel_find (const struct net *net,u32 tunnel_id); +struct l2tp_tunnel *l2tp_tunnel_find_nth (const struct net *net,int nth); int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg,
Greg Kroah-Hartman
maintainerPATCH 48/65 l2tp: initialise sessions refcount before making it reachable
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 9ee369a405c57613d7c83a3967780c3e30c52ecc upstream.
Sessions must be fully initialised before calling l2tp_session_add_to_tunnel(). Otherwise, there's a short time frame where partially initialised sessions can be accessed by external users.
Backporting Notes
l2tp_core.c: moving code that had been converted from atomic to refcount_t by an earlier change (which isn't being included in this patch series).
--- net/l2tp/l2tp_core.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
net/l2tp/l2tp_core.c +2 -4
@@ -1853,6 +1853,8 @@ struct l2tp_session *l2tp_session_createl2tp_session_set_header_len (session, tunnel->version); +l2tp_session_inc_refcount (session); + err =l2tp_session_add_to_tunnel (tunnel, session);if (err) {kfree (session);
@@ -1860,10 +1862,6 @@ struct l2tp_session *l2tp_session_createreturn ERR_PTR (err); } -/* Bump the reference count. The session context is deleted -* only when this drops to zero. -*/ -l2tp_session_inc_refcount (session);l2tp_tunnel_inc_refcount (tunnel);/* Ensure tunnel socket isn't deleted */
Greg Kroah-Hartman
maintainerPATCH 49/65 l2tp: hold tunnel while looking up sessions in l2tp_netlink
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 54652eb12c1b72e9602d09cb2821d5760939190f upstream.
l2tp_tunnel_find() doesn't take a reference on the returned tunnel. Therefore, it's unsafe to use it because the returned tunnel can go away on us anytime.
Fix this by defining l2tp_tunnel_get(), which works like l2tp_tunnel_find(), but takes a reference on the returned tunnel. Caller then has to drop this reference using l2tp_tunnel_dec_refcount().
As l2tp_tunnel_dec_refcount() needs to be moved to l2tp_core.h, let's simplify the patch and not move the L2TP_REFCNT_DEBUG part. This code has been broken (not even compiling) in May 2012 by
commit a4ca44fa578c ("net: l2tp: Standardize logging styles") and fixed more than two years later by
commit 29abe2fda54f ("l2tp: fix missing line continuation"). So it doesn't appear to be used by anyone.
Same thing for l2tp_tunnel_free(); instead of moving it to l2tp_core.h, let's just simplify things and call kfree_rcu() directly in l2tp_tunnel_dec_refcount(). Extra assertions and debugging code provided by l2tp_tunnel_free() didn't help catching any of the reference counting and socket handling issues found while working on this series.
Backporting Notes
l2tp_core.c: This patch deletes some code / moves some code to l2tp_core.h and follows the patch (not including in this series) that switched from atomic to refcount_t. Moved code changed back to atomic.
--- net/l2tp/l2tp_core.c | 66 +++++++++++++++--------------------------------- net/l2tp/l2tp_core.h | 13 +++++++++ net/l2tp/l2tp_netlink.c | 6 ++-- 3 files changed, 38 insertions(+), 47 deletions(-)
net/l2tp/l2tp_core.c +21 -45
@@ -112,7 +112,6 @@ struct l2tp_net {spinlock_t l2tp_session_hlist_lock; }; -static void l2tp_tunnel_free (struct l2tp_tunnel *tunnel);static inline struct l2tp_tunnel *l2tp_tunnel (struct sock *sk) {
@@ -126,39 +125,6 @@ static inline struct l2tp_net *l2tp_pernreturn net_generic (net, l2tp_net_id); } -/* Tunnel reference counts. Incremented per session that is added to -* the tunnel. -*/ -static inline void l2tp_tunnel_inc_refcount_1 (struct l2tp_tunnel *tunnel) -{ -atomic_inc (&tunnel->ref_count); -} - -static inline void l2tp_tunnel_dec_refcount_1 (struct l2tp_tunnel *tunnel) -{ -if (atomic_dec_and_test (&tunnel->ref_count)) -l2tp_tunnel_free (tunnel); -} -#ifdef L2TP_REFCNT_DEBUG -#define l2tp_tunnel_inc_refcount (_t) \ -do { \ - pr_debug("l2tp_tunnel_inc_refcount: %s:%d %s: cnt=%d\n", \ - __func__, __LINE__, (_t)->name, \ - atomic_read(&_t->ref_count)); \ - l2tp_tunnel_inc_refcount_1(_t); \ -} while (0) -#define l2tp_tunnel_dec_refcount (_t) \ -do { \ - pr_debug("l2tp_tunnel_dec_refcount: %s:%d %s: cnt=%d\n", \ - __func__, __LINE__, (_t)->name, \ - atomic_read(&_t->ref_count)); \ - l2tp_tunnel_dec_refcount_1(_t); \ -} while (0) -#else -#define l2tp_tunnel_inc_refcount (t) l2tp_tunnel_inc_refcount_1(t) -#define l2tp_tunnel_dec_refcount (t) l2tp_tunnel_dec_refcount_1(t) -#endif -/* Session hash global list for L2TPv3. * The session_id SHOULD be random according to RFC3931, but several * L2TP implementations use incrementing session_ids. So we do a real
@@ -228,6 +194,27 @@ l2tp_session_id_hash(struct l2tp_tunnelreturn &tunnel->session_hlist[hash_32 (session_id,L2TP_HASH_BITS )]; } +/* Lookup a tunnel. A new reference is held on the returned tunnel. */ +struct l2tp_tunnel *l2tp_tunnel_get (const struct net *net,u32 tunnel_id) +{ +const struct l2tp_net *pn =l2tp_pernet (net); +struct l2tp_tunnel *tunnel; + +rcu_read_lock_bh (); +list_for_each_entry_rcu (tunnel, &pn->l2tp_tunnel_list, list) { +if (tunnel->tunnel_id == tunnel_id) { +l2tp_tunnel_inc_refcount (tunnel); +rcu_read_unlock_bh (); + +return tunnel; + } + } +rcu_read_unlock_bh (); + +return NULL ; +} +EXPORT_SYMBOL_GPL (l2tp_tunnel_get); +/* Lookup a session. A new reference is held on the returned session. * Optionally calls session->ref() too if do_ref is true. */
@@ -1351,17 +1338,6 @@ static void l2tp_udp_encap_destroy(struc } } -/* Really kill the tunnel. -* Come here only when all sessions have been cleared from the tunnel. -*/ -static void l2tp_tunnel_free (struct l2tp_tunnel *tunnel) -{ -BUG_ON (atomic_read (&tunnel->ref_count) !=0 ); -BUG_ON (tunnel->sock !=NULL ); -l2tp_info (tunnel,L2TP_MSG_CONTROL ,"%s: free...\n" , tunnel->name); -kfree_rcu (tunnel, rcu); -} -/* Workqueue tunnel deletion function */ static void l2tp_tunnel_del_work (struct work_struct *work) {
net/l2tp/l2tp_core.h +13 -0
@@ -234,6 +234,8 @@ out:return tunnel; } +struct l2tp_tunnel *l2tp_tunnel_get (const struct net *net,u32 tunnel_id); +struct l2tp_session *l2tp_session_get (const struct net *net,struct l2tp_tunnel *tunnel,u32 session_id,bool do_ref);
@@ -272,6 +274,17 @@ int l2tp_nl_register_ops(enum l2tp_pwtypvoid l2tp_nl_unregister_ops (enum l2tp_pwtype pw_type);int l2tp_ioctl (struct sock *sk,int cmd,unsigned long arg); +static inline void l2tp_tunnel_inc_refcount (struct l2tp_tunnel *tunnel) +{ +atomic_inc (&tunnel->ref_count); +} + +static inline void l2tp_tunnel_dec_refcount (struct l2tp_tunnel *tunnel) +{ +if (atomic_dec_and_test (&tunnel->ref_count)) +kfree_rcu (tunnel, rcu); +} +/* Session reference counts. Incremented when code obtains a reference * to a session. */
net/l2tp/l2tp_netlink.c +4 -2
@@ -72,10 +72,12 @@ static struct l2tp_session *l2tp_nl_sess (info->attrs[L2TP_ATTR_CONN_ID])) { tunnel_id =nla_get_u32 (info->attrs[L2TP_ATTR_CONN_ID ]); session_id =nla_get_u32 (info->attrs[L2TP_ATTR_SESSION_ID ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (tunnel) + tunnel =l2tp_tunnel_get (net, tunnel_id); +if (tunnel) { session =l2tp_session_get (net, tunnel, session_id, do_ref); +l2tp_tunnel_dec_refcount (tunnel); + } }return session;
Greg Kroah-Hartman
maintainerPATCH 50/65 l2tp: hold tunnel while processing genl delete command
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit bb0a32ce4389e17e47e198d2cddaf141561581ad upstream.
l2tp_nl_cmd_tunnel_delete() needs to take a reference on the tunnel, to prevent it from being concurrently freed by l2tp_tunnel_destruct().
--- net/l2tp/l2tp_netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
net/l2tp/l2tp_netlink.c +4 -2
@@ -280,8 +280,8 @@ static int l2tp_nl_cmd_tunnel_delete(str } tunnel_id =nla_get_u32 (info->attrs[L2TP_ATTR_CONN_ID ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (tunnel ==NULL ) { + tunnel =l2tp_tunnel_get (net, tunnel_id); +if (!tunnel) { ret = -ENODEV ; goto out; }
@@ -291,6 +291,8 @@ static int l2tp_nl_cmd_tunnel_delete(strl2tp_tunnel_delete (tunnel); +l2tp_tunnel_dec_refcount (tunnel); + out:return ret; }
Greg Kroah-Hartman
maintainerPATCH 51/65 l2tp: hold tunnel while handling genl tunnel updates
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 8c0e421525c9eb50d68e8f633f703ca31680b746 upstream.
We need to make sure the tunnel is not going to be destroyed by l2tp_tunnel_destruct() concurrently.
--- net/l2tp/l2tp_netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
net/l2tp/l2tp_netlink.c +4 -2
@@ -310,8 +310,8 @@ static int l2tp_nl_cmd_tunnel_modify(str } tunnel_id =nla_get_u32 (info->attrs[L2TP_ATTR_CONN_ID ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (tunnel ==NULL ) { + tunnel =l2tp_tunnel_get (net, tunnel_id); +if (!tunnel) { ret = -ENODEV ; goto out; }
@@ -322,6 +322,8 @@ static int l2tp_nl_cmd_tunnel_modify(str ret =l2tp_tunnel_notify (&l2tp_nl_family, info, tunnel,L2TP_CMD_TUNNEL_MODIFY ); +l2tp_tunnel_dec_refcount (tunnel); + out:return ret; }
Greg Kroah-Hartman
maintainerPATCH 52/65 l2tp: hold tunnel while handling genl TUNNEL_GET commands
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 4e4b21da3acc68a7ea55f850cacc13706b7480e9 upstream.
Use l2tp_tunnel_get() instead of l2tp_tunnel_find() so that we get a reference on the tunnel, preventing l2tp_tunnel_destruct() from freeing it from under us.
Also move l2tp_tunnel_get() below nlmsg_new() so that we only take the reference when needed.
--- net/l2tp/l2tp_netlink.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
net/l2tp/l2tp_netlink.c +15 -12
@@ -428,34 +428,37 @@ static int l2tp_nl_cmd_tunnel_get(structif (!info->attrs[L2TP_ATTR_CONN_ID ]) { ret = -EINVAL ; - goto out; + goto err; } tunnel_id =nla_get_u32 (info->attrs[L2TP_ATTR_CONN_ID ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (tunnel ==NULL ) { - ret = -ENODEV ; - goto out; - } - msg =nlmsg_new (NLMSG_DEFAULT_SIZE ,GFP_KERNEL );if (!msg) { ret = -ENOMEM ; - goto out; + goto err; + } + + tunnel =l2tp_tunnel_get (net, tunnel_id); +if (!tunnel) { + ret = -ENODEV ; + goto err_nlmsg; } ret =l2tp_nl_tunnel_send (msg, info->snd_portid, info->snd_seq,NLM_F_ACK , tunnel,L2TP_CMD_TUNNEL_GET );if (ret <0 ) - goto err_out; + goto err_nlmsg_tunnel; + +l2tp_tunnel_dec_refcount (tunnel);return genlmsg_unicast (net, msg, info->snd_portid); -err_out: +err_nlmsg_tunnel: +l2tp_tunnel_dec_refcount (tunnel); +err_nlmsg:nlmsg_free (msg); - -out: +err:return ret; }
Greg Kroah-Hartman
maintainerPATCH 53/65 l2tp: hold tunnel used while creating sessions with netlink
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit e702c1204eb57788ef189c839c8c779368267d70 upstream.
Use l2tp_tunnel_get() to retrieve tunnel, so that it can't go away on us. Otherwise l2tp_tunnel_destruct() might release the last reference count concurrently, thus freeing the tunnel while we're using it.
--- net/l2tp/l2tp_netlink.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
net/l2tp/l2tp_netlink.c +12 -9
@@ -502,8 +502,9 @@ static int l2tp_nl_cmd_session_create(st ret = -EINVAL ; goto out; } + tunnel_id =nla_get_u32 (info->attrs[L2TP_ATTR_CONN_ID ]); - tunnel =l2tp_tunnel_find (net, tunnel_id); + tunnel =l2tp_tunnel_get (net, tunnel_id);if (!tunnel) { ret = -ENODEV ; goto out;
@@ -511,24 +512,24 @@ static int l2tp_nl_cmd_session_create(stif (!info->attrs[L2TP_ATTR_SESSION_ID ]) { ret = -EINVAL ; - goto out; + goto out_tunnel; } session_id =nla_get_u32 (info->attrs[L2TP_ATTR_SESSION_ID ]);if (!info->attrs[L2TP_ATTR_PEER_SESSION_ID ]) { ret = -EINVAL ; - goto out; + goto out_tunnel; } peer_session_id =nla_get_u32 (info->attrs[L2TP_ATTR_PEER_SESSION_ID ]);if (!info->attrs[L2TP_ATTR_PW_TYPE ]) { ret = -EINVAL ; - goto out; + goto out_tunnel; } cfg.pw_type =nla_get_u16 (info->attrs[L2TP_ATTR_PW_TYPE ]);if (cfg.pw_type >= __L2TP_PWTYPE_MAX) { ret = -EINVAL ; - goto out; + goto out_tunnel; }if (tunnel->version >2 ) {
@@ -550,7 +551,7 @@ static int l2tp_nl_cmd_session_create(stu16 len =nla_len (info->attrs[L2TP_ATTR_COOKIE ]);if (len >8 ) { ret = -EINVAL ; - goto out; + goto out_tunnel; } cfg.cookie_len = len;memcpy (&cfg.cookie[0 ],nla_data (info->attrs[L2TP_ATTR_COOKIE ]), len);
@@ -559,7 +560,7 @@ static int l2tp_nl_cmd_session_create(stu16 len =nla_len (info->attrs[L2TP_ATTR_PEER_COOKIE ]);if (len >8 ) { ret = -EINVAL ; - goto out; + goto out_tunnel; } cfg.peer_cookie_len = len;memcpy (&cfg.peer_cookie[0 ],nla_data (info->attrs[L2TP_ATTR_PEER_COOKIE ]), len);
@@ -602,7 +603,7 @@ static int l2tp_nl_cmd_session_create(stif ((l2tp_nl_cmd_ops[cfg.pw_type] ==NULL ) || (l2tp_nl_cmd_ops[cfg.pw_type]->session_create ==NULL )) { ret = -EPROTONOSUPPORT ; - goto out; + goto out_tunnel; }/* Check that pseudowire-specific params are present */
@@ -612,7 +613,7 @@ static int l2tp_nl_cmd_session_create(stcase L2TP_PWTYPE_ETH_VLAN :if (!info->attrs[L2TP_ATTR_VLAN_ID ]) { ret = -EINVAL ; - goto out; + goto out_tunnel; }break ;case L2TP_PWTYPE_ETH :
@@ -640,6 +641,8 @@ static int l2tp_nl_cmd_session_create(st } } +out_tunnel: +l2tp_tunnel_dec_refcount (tunnel); out:return ret; }
Greg Kroah-Hartman
maintainerPATCH 54/65 l2tp: prevent creation of sessions on terminated tunnels
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit f3c66d4e144a0904ea9b95d23ed9f8eb38c11bfb upstream.
l2tp_tunnel_destruct() sets tunnel->sock to NULL, then removes the tunnel from the pernet list and finally closes all its sessions. Therefore, it's possible to add a session to a tunnel that is still reachable, but for which tunnel->sock has already been reset. This can make l2tp_session_create() dereference a NULL pointer when calling sock_hold(tunnel->sock).
This patch adds the .acpt_newsess field to struct l2tp_tunnel, which is used by l2tp_tunnel_closeall() to prevent addition of new sessions to tunnels. Resetting tunnel->sock is done after l2tp_tunnel_closeall() returned, so that l2tp_session_add_to_tunnel() can safely take a reference on it when .acpt_newsess is true.
The .acpt_newsess field is modified in l2tp_tunnel_closeall(), rather than in l2tp_tunnel_destruct(), so that it benefits all tunnel removal mechanisms. E.g. on UDP tunnels, a session could be added to a tunnel after l2tp_udp_encap_destroy() proceeded. This would prevent the tunnel from being removed because of the references held by this new session on the tunnel and its socket. Even though the session could be removed manually later on, this defeats the purpose of
commit 9980d001cec8 ("l2tp: add udp encap socket destroy handler").
--- net/l2tp/l2tp_core.c | 41 ++++++++++++++++++++++++++++------------- net/l2tp/l2tp_core.h | 4 ++++ 2 files changed, 32 insertions(+), 13 deletions(-)
net/l2tp/l2tp_core.c +28 -13
@@ -328,13 +328,21 @@ static int l2tp_session_add_to_tunnel(ststruct hlist_head *g_head;struct hlist_head *head;struct l2tp_net *pn; +int err; head =l2tp_session_id_hash (tunnel, session->session_id);write_lock_bh (&tunnel->hlist_lock); +if (!tunnel->acpt_newsess) { + err = -ENODEV ; + goto err_tlock; + } +hlist_for_each_entry (session_walk, head, hlist) -if (session_walk->session_id == session->session_id) - goto exist; +if (session_walk->session_id == session->session_id) { + err = -EEXIST ; + goto err_tlock; + }if (tunnel->version ==L2TP_HDR_VER_3 ) { pn =l2tp_pernet (tunnel->l2tp_net);
@@ -342,12 +350,21 @@ static int l2tp_session_add_to_tunnel(st session->session_id);spin_lock_bh (&pn->l2tp_session_hlist_lock); +hlist_for_each_entry (session_walk, g_head, global_hlist) -if (session_walk->session_id == session->session_id) - goto exist_glob; +if (session_walk->session_id == session->session_id) { + err = -EEXIST ; + goto err_tlock_pnlock; + } +l2tp_tunnel_inc_refcount (tunnel); +sock_hold (tunnel->sock);hlist_add_head_rcu (&session->global_hlist, g_head); +spin_unlock_bh (&pn->l2tp_session_hlist_lock); + }else { +l2tp_tunnel_inc_refcount (tunnel); +sock_hold (tunnel->sock); }hlist_add_head (&session->hlist, head);
@@ -355,12 +372,12 @@ static int l2tp_session_add_to_tunnel(streturn 0 ; -exist_glob: +err_tlock_pnlock:spin_unlock_bh (&pn->l2tp_session_hlist_lock); -exist: +err_tlock:write_unlock_bh (&tunnel->hlist_lock); -return -EEXIST ; +return err; }/* Lookup a tunnel by id
@@ -1251,7 +1268,6 @@ static void l2tp_tunnel_destruct(struct/* Remove hooks into tunnel socket */ sk->sk_destruct = tunnel->old_sk_destruct; sk->sk_user_data =NULL ; - tunnel->sock =NULL ;/* Remove the tunnel struct from the tunnel list */ pn =l2tp_pernet (tunnel->l2tp_net);
@@ -1261,6 +1277,8 @@ static void l2tp_tunnel_destruct(structatomic_dec (&l2tp_tunnel_count);l2tp_tunnel_closeall (tunnel); + + tunnel->sock =NULL ;l2tp_tunnel_dec_refcount (tunnel);/* Call the original destructor */
@@ -1285,6 +1303,7 @@ void l2tp_tunnel_closeall(struct l2tp_tu tunnel->name);write_lock_bh (&tunnel->hlist_lock); + tunnel->acpt_newsess = false;for (hash =0 ; hash <L2TP_HASH_SIZE ; hash++) { again:hlist_for_each_safe (walk, tmp, &tunnel->session_hlist[hash]) {
@@ -1588,6 +1607,7 @@ int l2tp_tunnel_create(struct net *net, tunnel->magic =L2TP_TUNNEL_MAGIC ;sprintf (&tunnel->name[0 ],"tunl %u" , tunnel_id);rwlock_init (&tunnel->hlist_lock); + tunnel->acpt_newsess = true;/* The net we belong to */ tunnel->l2tp_net = net;
@@ -1838,11 +1858,6 @@ struct l2tp_session *l2tp_session_createreturn ERR_PTR (err); } -l2tp_tunnel_inc_refcount (tunnel); - -/* Ensure tunnel socket isn't deleted */ -sock_hold (tunnel->sock); -/* Ignore management session in session count value */ if (session->session_id !=0 )atomic_inc (&l2tp_session_count);
net/l2tp/l2tp_core.h +4 -0
@@ -165,6 +165,10 @@ struct l2tp_tunnel {struct rcu_head rcu;rwlock_t hlist_lock;/* protect session_hlist */ +bool acpt_newsess;/* Indicates whether this +* tunnel accepts new sessions. +* Protected by hlist_lock. +*/ struct hlist_head session_hlist[L2TP_HASH_SIZE ];/* hashed list of sessions, * hashed by id */
Greg Kroah-Hartman
maintainerPATCH 55/65 l2tp: pass tunnel pointer to ->session_create()
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit f026bc29a8e093edfbb2a77700454b285c97e8ad upstream.
Using l2tp_tunnel_find() in pppol2tp_session_create() and l2tp_eth_create() is racy, because no reference is held on the returned session. These functions are only used to implement the ->session_create callback which is run by l2tp_nl_cmd_session_create(). Therefore searching for the parent tunnel isn't necessary because l2tp_nl_cmd_session_create() already has a pointer to it and holds a reference.
This patch modifies ->session_create()'s prototype to directly pass the the parent tunnel as parameter, thus avoiding searching for it in pppol2tp_session_create() and l2tp_eth_create().
Since we have to touch the ->session_create() call in l2tp_nl_cmd_session_create(), let's also remove the useless conditional:
we know that ->session_create isn't NULL at this point because it's already been checked earlier in this same function.
Finally, one might be tempted to think that the removed l2tp_tunnel_find() calls were harmless because they would return the same tunnel as the one held by l2tp_nl_cmd_session_create() anyway. But that tunnel might be removed and a new one created with same tunnel Id before the l2tp_tunnel_find() call. In this case l2tp_tunnel_find() would return the new tunnel which wouldn't be protected by the reference held by l2tp_nl_cmd_session_create().
--- net/l2tp/l2tp_core.h | 4 +++- net/l2tp/l2tp_eth.c | 11 +++-------- net/l2tp/l2tp_netlink.c | 8 ++++---- net/l2tp/l2tp_ppp.c | 19 +++++++------------ 4 files changed, 17 insertions(+), 25 deletions(-)
net/l2tp/l2tp_core.h +3 -1
@@ -204,7 +204,9 @@ struct l2tp_tunnel { };struct l2tp_nl_cmd_ops { -int (*session_create)(struct net *net,u32 tunnel_id,u32 session_id,u32 peer_session_id,struct l2tp_session_cfg *cfg); +int (*session_create)(struct net *net,struct l2tp_tunnel *tunnel, +u32 session_id,u32 peer_session_id, +struct l2tp_session_cfg *cfg);int (*session_delete)(struct l2tp_session *session); };
net/l2tp/l2tp_eth.c +3 -8
@@ -256,23 +256,18 @@ static void l2tp_eth_adjust_mtu(struct l dev->needed_headroom += session->hdr_len; } -static int l2tp_eth_create (struct net *net,u32 tunnel_id,u32 session_id,u32 peer_session_id,struct l2tp_session_cfg *cfg) +static int l2tp_eth_create (struct net *net,struct l2tp_tunnel *tunnel, +u32 session_id,u32 peer_session_id, +struct l2tp_session_cfg *cfg) {struct net_device *dev;char name[IFNAMSIZ ]; -struct l2tp_tunnel *tunnel;struct l2tp_session *session;struct l2tp_eth *priv;struct l2tp_eth_sess *spriv;int rc;struct l2tp_eth_net *pn; - tunnel =l2tp_tunnel_find (net, tunnel_id); -if (!tunnel) { - rc = -ENODEV ; - goto out; - } -if (cfg->ifname) { dev =dev_get_by_name (net, cfg->ifname);if (dev) {
net/l2tp/l2tp_netlink.c +4 -4
@@ -627,10 +627,10 @@ static int l2tp_nl_cmd_session_create(stbreak ; } - ret = -EPROTONOSUPPORT ; -if (l2tp_nl_cmd_ops[cfg.pw_type]->session_create) - ret = (*l2tp_nl_cmd_ops[cfg.pw_type]->session_create)(net, tunnel_id, - session_id, peer_session_id, &cfg); + ret = l2tp_nl_cmd_ops[cfg.pw_type]->session_create (net, tunnel, + session_id, + peer_session_id, + &cfg);if (ret >=0 ) { session =l2tp_session_get (net, tunnel, session_id, false);
net/l2tp/l2tp_ppp.c +7 -12
@@ -810,25 +810,20 @@ end:#ifdef CONFIG_L2TP_V3 -/* Called when creating sessions via the netlink interface. -*/ -static int pppol2tp_session_create (struct net *net,u32 tunnel_id,u32 session_id,u32 peer_session_id,struct l2tp_session_cfg *cfg) +/* Called when creating sessions via the netlink interface. */ +static int pppol2tp_session_create (struct net *net,struct l2tp_tunnel *tunnel, +u32 session_id,u32 peer_session_id, +struct l2tp_session_cfg *cfg) {int error; -struct l2tp_tunnel *tunnel;struct l2tp_session *session;struct pppol2tp_session *ps; - tunnel =l2tp_tunnel_find (net, tunnel_id); - -/* Error if we can't find the tunnel */ - error = -ENOENT ; -if (tunnel ==NULL ) - goto out; -/* Error if tunnel socket is not prepped */ -if (tunnel->sock ==NULL ) +if (!tunnel->sock) { + error = -ENOENT ; goto out; + }/* Default MTU values. */ if (cfg->mtu ==0 )
Greg Kroah-Hartman
maintainerPATCH 56/65 l2tp: fix l2tp_eth module loading
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 9f775ead5e570e7e19015b9e4e2f3dd6e71a5935 upstream.
The l2tp_eth module crashes if its netlink callbacks are run when the pernet data aren't initialised.
We should normally register_pernet_device() before the genl callbacks. However, the pernet data only maintain a list of l2tpeth interfaces, and this list is never used. So let's just drop pernet handling instead.
--- net/l2tp/l2tp_eth.c | 51 ++------------------------------------------------- 1 file changed, 2 insertions(+), 49 deletions(-)
net/l2tp/l2tp_eth.c +2 -49
@@ -44,7 +44,6 @@ struct l2tp_eth {struct net_device *dev;struct sock *tunnel_sock;struct l2tp_session *session; -struct list_head list;atomic_long_t tx_bytes;atomic_long_t tx_packets;atomic_long_t tx_dropped;
@@ -58,17 +57,6 @@ struct l2tp_eth_sess {struct net_device *dev; }; -/* per-net private data for this module */ -static unsigned int l2tp_eth_net_id; -struct l2tp_eth_net { -struct list_head l2tp_eth_dev_list; -spinlock_t l2tp_eth_lock; -}; - -static inline struct l2tp_eth_net *l2tp_eth_pernet (struct net *net) -{ -return net_generic (net, l2tp_eth_net_id); -}static struct lock_class_key l2tp_eth_tx_busylock;static int l2tp_eth_dev_init (struct net_device *dev)
@@ -84,12 +72,6 @@ static int l2tp_eth_dev_init(struct net_static void l2tp_eth_dev_uninit (struct net_device *dev) { -struct l2tp_eth *priv =netdev_priv (dev); -struct l2tp_eth_net *pn =l2tp_eth_pernet (dev_net (dev)); - -spin_lock (&pn->l2tp_eth_lock); -list_del_init (&priv->list); -spin_unlock (&pn->l2tp_eth_lock);dev_put (dev); }
@@ -266,7 +248,6 @@ static int l2tp_eth_create(struct net *nstruct l2tp_eth *priv;struct l2tp_eth_sess *spriv;int rc; -struct l2tp_eth_net *pn;if (cfg->ifname) { dev =dev_get_by_name (net, cfg->ifname);
@@ -299,7 +280,6 @@ static int l2tp_eth_create(struct net *n priv =netdev_priv (dev); priv->dev = dev; priv->session = session; -INIT_LIST_HEAD (&priv->list); priv->tunnel_sock = tunnel->sock; session->recv_skb = l2tp_eth_dev_recv;
@@ -320,10 +300,6 @@ static int l2tp_eth_create(struct net *nstrlcpy (session->ifname, dev->name,IFNAMSIZ );dev_hold (dev); - pn =l2tp_eth_pernet (dev_net (dev)); -spin_lock (&pn->l2tp_eth_lock); -list_add (&priv->list, &pn->l2tp_eth_dev_list); -spin_unlock (&pn->l2tp_eth_lock);return 0 ;
@@ -336,22 +312,6 @@ out:return rc; } -static __net_init int l2tp_eth_init_net (struct net *net) -{ -struct l2tp_eth_net *pn =net_generic (net, l2tp_eth_net_id); - -INIT_LIST_HEAD (&pn->l2tp_eth_dev_list); -spin_lock_init (&pn->l2tp_eth_lock); - -return 0 ; -} - -static struct pernet_operations l2tp_eth_net_ops = { - .init = l2tp_eth_init_net, - .id = &l2tp_eth_net_id, - .size =sizeof (struct l2tp_eth_net ), -}; -static const struct l2tp_nl_cmd_ops l2tp_eth_nl_cmd_ops = { .session_create = l2tp_eth_create,
@@ -365,25 +325,18 @@ static int __init l2tp_eth_init(void) err =l2tp_nl_register_ops (L2TP_PWTYPE_ETH , &l2tp_eth_nl_cmd_ops);if (err) - goto out; - - err =register_pernet_device (&l2tp_eth_net_ops); -if (err) - goto out_unreg; + goto err;pr_info ("L2TP ethernet pseudowire support (L2TPv3)\n" );return 0 ; -out_unreg: -l2tp_nl_unregister_ops (L2TP_PWTYPE_ETH ); -out: +err:return err; } static void __exit l2tp_eth_exit(void) { -unregister_pernet_device (&l2tp_eth_net_ops);l2tp_nl_unregister_ops (L2TP_PWTYPE_ETH ); }
Greg Kroah-Hartman
maintainerPATCH 57/65 l2tp: dont register sessions in l2tp_session_create()
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit 3953ae7b218df4d1e544b98a393666f9ae58a78c upstream.
Sessions created by l2tp_session_create() aren't fully initialised:
some pseudo-wire specific operations need to be done before making the session usable. Therefore the PPP and Ethernet pseudo-wires continue working on the returned l2tp session while it's already been exposed to the rest of the system.
This can lead to various issues. In particular, the session may enter the deletion process before having been fully initialised, which will confuse the session removal code.
This patch moves session registration out of l2tp_session_create(), so that callers can control when the session is exposed to the rest of the system. This is done by the new l2tp_session_register() function.
Only pppol2tp_session_create() can be easily converted to avoid modifying its session after registration (the debug message is dropped in order to avoid the need for holding a reference on the session).
For pppol2tp_connect() and l2tp_eth_create()), more work is needed. That'll be done in followup patches. For now, let's just register the session right after its creation, like it was done before. The only difference is that we can easily take a reference on the session before registering it, so, at least, we're sure it's not going to be freed while we're working on it.
--- net/l2tp/l2tp_core.c | 21 +++++++-------------- net/l2tp/l2tp_core.h | 3 +++ net/l2tp/l2tp_eth.c | 9 +++++++++ net/l2tp/l2tp_ppp.c | 27 +++++++++++++++++++-------- 4 files changed, 38 insertions(+), 22 deletions(-)
net/l2tp/l2tp_core.c +7 -14
@@ -321,8 +321,8 @@ struct l2tp_session *l2tp_session_get_by }EXPORT_SYMBOL_GPL (l2tp_session_get_by_ifname); -static int l2tp_session_add_to_tunnel (struct l2tp_tunnel *tunnel, -struct l2tp_session *session) +int l2tp_session_register (struct l2tp_session *session, +struct l2tp_tunnel *tunnel) {struct l2tp_session *session_walk;struct hlist_head *g_head;
@@ -370,6 +370,10 @@ static int l2tp_session_add_to_tunnel(sthlist_add_head (&session->hlist, head);write_unlock_bh (&tunnel->hlist_lock); +/* Ignore management session in session count value */ +if (session->session_id !=0 ) +atomic_inc (&l2tp_session_count); +return 0 ; err_tlock_pnlock:
@@ -379,6 +383,7 @@ err_tlock:return err; } +EXPORT_SYMBOL_GPL (l2tp_session_register);/* Lookup a tunnel by id */
@@ -1793,7 +1798,6 @@ EXPORT_SYMBOL_GPL(l2tp_session_set_headestruct l2tp_session *l2tp_session_create (int priv_size,struct l2tp_tunnel *tunnel,u32 session_id,u32 peer_session_id,struct l2tp_session_cfg *cfg) {struct l2tp_session *session; -int err; session =kzalloc (sizeof (struct l2tp_session ) + priv_size,GFP_KERNEL );if (session !=NULL ) {
@@ -1851,17 +1855,6 @@ struct l2tp_session *l2tp_session_createl2tp_session_inc_refcount (session); - err =l2tp_session_add_to_tunnel (tunnel, session); -if (err) { -kfree (session); - -return ERR_PTR (err); - } - -/* Ignore management session in session count value */ -if (session->session_id !=0 ) -atomic_inc (&l2tp_session_count); -return session; }
net/l2tp/l2tp_core.h +3 -0
@@ -262,6 +262,9 @@ struct l2tp_session *l2tp_session_createstruct l2tp_tunnel *tunnel, u32 session_id, u32 peer_session_id, struct l2tp_session_cfg *cfg); +int l2tp_session_register (struct l2tp_session *session, +struct l2tp_tunnel *tunnel); +void __l2tp_session_unhash (struct l2tp_session *session);int l2tp_session_delete (struct l2tp_session *session);void l2tp_session_free (struct l2tp_session *session);
net/l2tp/l2tp_eth.c +9 -0
@@ -267,6 +267,13 @@ static int l2tp_eth_create(struct net *n goto out; } +l2tp_session_inc_refcount (session); + rc =l2tp_session_register (session, tunnel); +if (rc <0 ) { +kfree (session); + goto out; + } + dev =alloc_netdev (sizeof (*priv), name,NET_NAME_UNKNOWN , l2tp_eth_dev_setup);if (!dev) {
@@ -298,6 +305,7 @@ static int l2tp_eth_create(struct net *n__module_get (THIS_MODULE );/* Must be done after register_netdev() */ strlcpy (session->ifname, dev->name,IFNAMSIZ ); +l2tp_session_dec_refcount (session);dev_hold (dev);
@@ -308,6 +316,7 @@ out_del_dev: spriv->dev =NULL ; out_del_session:l2tp_session_delete (session); +l2tp_session_dec_refcount (session); out:return rc; }
net/l2tp/l2tp_ppp.c +19 -8
@@ -737,6 +737,14 @@ static int pppol2tp_connect(struct socke error =PTR_ERR (session); goto end; } + +l2tp_session_inc_refcount (session); + error =l2tp_session_register (session, tunnel); +if (error <0 ) { +kfree (session); + goto end; + } + drop_refcnt = true; }/* Associate session with its PPPoL2TP socket */
@@ -822,7 +830,7 @@ static int pppol2tp_session_create(struc/* Error if tunnel socket is not prepped */ if (!tunnel->sock) { error = -ENOENT ; - goto out; + goto err; }/* Default MTU values. */
@@ -837,18 +845,21 @@ static int pppol2tp_session_create(struc peer_session_id, cfg);if (IS_ERR (session)) { error =PTR_ERR (session); - goto out; + goto err; } ps =l2tp_session_priv (session); ps->tunnel_sock = tunnel->sock; -l2tp_info (session,L2TP_MSG_CONTROL ,"%s: created\n" , - session->name); - - error =0 ; - -out: + error =l2tp_session_register (session, tunnel); +if (error <0 ) + goto err_sess; + +return 0 ; + +err_sess: +kfree (session); +err:return error; }
Greg Kroah-Hartman
maintainerPATCH 58/65 l2tp: initialise l2tp_eth sessions before registering them
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit ee28de6bbd78c2e18111a0aef43ea746f28d2073 upstream.
Sessions must be initialised before being made externally visible by l2tp_session_register(). Otherwise the session may be concurrently deleted before being initialised, which can confuse the deletion path and eventually lead to kernel oops.
Therefore, we need to move l2tp_session_register() down in l2tp_eth_create(), but also handle the intermediate step where only the session or the netdevice has been registered.
We can't just call l2tp_session_register() in ->ndo_init() because we'd have no way to properly undo this operation in ->ndo_uninit(). Instead, let's register the session and the netdevice in two different steps and protect the session's device pointer with RCU.
And now that we allow the session's .dev field to be NULL, we don't need to prevent the netdevice from being removed anymore. So we can drop the dev_hold() and dev_put() calls in l2tp_eth_create() and l2tp_eth_dev_uninit().
Backporting Notes
l2tp_eth.c: In l2tp_eth_create the "out" label was renamed to "err". There was one extra occurrence of "goto out" to update.
--- net/l2tp/l2tp_eth.c | 108 ++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 76 insertions(+), 32 deletions(-)
net/l2tp/l2tp_eth.c +76 -32
@@ -54,7 +54,7 @@ struct l2tp_eth {/* via l2tp_session_priv() */ struct l2tp_eth_sess { -struct net_device *dev; +struct net_device __rcu *dev; };
@@ -72,7 +72,14 @@ static int l2tp_eth_dev_init(struct net_static void l2tp_eth_dev_uninit (struct net_device *dev) { -dev_put (dev); +struct l2tp_eth *priv =netdev_priv (dev); +struct l2tp_eth_sess *spriv; + + spriv =l2tp_session_priv (priv->session); +RCU_INIT_POINTER (spriv->dev,NULL ); +/* No need for synchronize_net() here. We're called by +* unregister_netdev*(), which does the synchronisation for us. +*/ }static int l2tp_eth_dev_xmit (struct sk_buff *skb,struct net_device *dev)
@@ -126,8 +133,8 @@ static void l2tp_eth_dev_setup(struct nestatic void l2tp_eth_dev_recv (struct l2tp_session *session,struct sk_buff *skb,int data_len) {struct l2tp_eth_sess *spriv =l2tp_session_priv (session); -struct net_device *dev = spriv->dev; -struct l2tp_eth *priv =netdev_priv (dev); +struct net_device *dev; +struct l2tp_eth *priv;if (session->debug &L2TP_MSG_DATA ) {unsigned int length;
@@ -151,16 +158,25 @@ static void l2tp_eth_dev_recv(struct l2tskb_dst_drop (skb);nf_reset (skb); +rcu_read_lock (); + dev =rcu_dereference (spriv->dev); +if (!dev) + goto error_rcu; + + priv =netdev_priv (dev);if (dev_forward_skb (dev, skb) ==NET_RX_SUCCESS ) {atomic_long_inc (&priv->rx_packets);atomic_long_add (data_len, &priv->rx_bytes); }else {atomic_long_inc (&priv->rx_errors); } +rcu_read_unlock (); +return ; +error_rcu: +rcu_read_unlock (); error: -atomic_long_inc (&priv->rx_errors);kfree_skb (skb); }
@@ -171,11 +187,15 @@ static void l2tp_eth_delete(struct l2tp_if (session) { spriv =l2tp_session_priv (session); - dev = spriv->dev; + +rtnl_lock (); + dev =rtnl_dereference (spriv->dev);if (dev) { -unregister_netdev (dev); - spriv->dev =NULL ; +unregister_netdevice (dev); +rtnl_unlock ();module_put (THIS_MODULE ); + }else { +rtnl_unlock (); } } }
@@ -185,9 +205,20 @@ static void l2tp_eth_show(struct seq_fil {struct l2tp_session *session = arg;struct l2tp_eth_sess *spriv =l2tp_session_priv (session); -struct net_device *dev = spriv->dev; +struct net_device *dev; + +rcu_read_lock (); + dev =rcu_dereference (spriv->dev); +if (!dev) { +rcu_read_unlock (); +return ; + } +dev_hold (dev); +rcu_read_unlock ();seq_printf (m," interface %s\n" , dev->name); + +dev_put (dev); }#endif
@@ -254,7 +285,7 @@ static int l2tp_eth_create(struct net *nif (dev) {dev_put (dev); rc = -EEXIST ; - goto out; + goto err; }strlcpy (name, cfg->ifname,IFNAMSIZ ); }else
@@ -264,21 +295,14 @@ static int l2tp_eth_create(struct net *n peer_session_id, cfg);if (IS_ERR (session)) { rc =PTR_ERR (session); - goto out; - } - -l2tp_session_inc_refcount (session); - rc =l2tp_session_register (session, tunnel); -if (rc <0 ) { -kfree (session); - goto out; + goto err; } dev =alloc_netdev (sizeof (*priv), name,NET_NAME_UNKNOWN , l2tp_eth_dev_setup);if (!dev) { rc = -ENOMEM ; - goto out_del_session; + goto err_sess; }dev_net_set (dev, net);
@@ -296,28 +320,48 @@ static int l2tp_eth_create(struct net *n#endif spriv =l2tp_session_priv (session); - spriv->dev = dev; - rc =register_netdev (dev); -if (rc <0 ) - goto out_del_dev; +l2tp_session_inc_refcount (session); + +rtnl_lock (); + +/* Register both device and session while holding the rtnl lock. This +* ensures that l2tp_eth_delete() will see that there's a device to +* unregister, even if it happened to run before we assign spriv->dev. +*/ + rc =l2tp_session_register (session, tunnel); +if (rc <0 ) { +rtnl_unlock (); + goto err_sess_dev; + } + + rc =register_netdevice (dev); +if (rc <0 ) { +rtnl_unlock (); +l2tp_session_delete (session); +l2tp_session_dec_refcount (session); +free_netdev (dev); + +return rc; + } -__module_get (THIS_MODULE ); -/* Must be done after register_netdev() */ strlcpy (session->ifname, dev->name,IFNAMSIZ ); +rcu_assign_pointer (spriv->dev, dev); + +rtnl_unlock (); +l2tp_session_dec_refcount (session); -dev_hold (dev); +__module_get (THIS_MODULE );return 0 ; -out_del_dev: -free_netdev (dev); - spriv->dev =NULL ; -out_del_session: -l2tp_session_delete (session); +err_sess_dev:l2tp_session_dec_refcount (session); -out: +free_netdev (dev); +err_sess: +kfree (session); +err:return rc; }
Greg Kroah-Hartman
maintainerPATCH 59/65 l2tp: protect sock pointer of struct pppol2tp_session with RCU
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit ee40fb2e1eb5bc0ddd3f2f83c6e39a454ef5a741 upstream.
pppol2tp_session_create() registers sessions that can't have their corresponding socket initialised. This socket has to be created by userspace, then connected to the session by pppol2tp_connect(). Therefore, we need to protect the pppol2tp socket pointer of L2TP sessions, so that it can safely be updated when userspace is connecting or closing the socket. This will eventually allow pppol2tp_connect() to avoid generating transient states while initialising its parts of the session.
To this end, this patch protects the pppol2tp socket pointer using RCU.
The pppol2tp socket pointer is still set in pppol2tp_connect(), but only once we know the function isn't going to fail. It's eventually reset by pppol2tp_release(), which now has to wait for a grace period to elapse before it can drop the last reference on the socket. This ensures that pppol2tp_session_get_sock() can safely grab a reference on the socket, even after ps->sk is reset to NULL but before this operation actually gets visible from pppol2tp_session_get_sock().
The rest is standard RCU conversion: pppol2tp_recv(), which already runs in atomic context, is simply enclosed by rcu_read_lock() and rcu_read_unlock(), while other functions are converted to use pppol2tp_session_get_sock() followed by sock_put(). pppol2tp_session_setsockopt() is a special case. It used to retrieve the pppol2tp socket from the L2TP session, which itself was retrieved from the pppol2tp socket. Therefore we can just avoid dereferencing ps->sk and directly use the original socket pointer instead.
With all users of ps->sk now handling NULL and concurrent updates, the L2TP ->ref() and ->deref() callbacks aren't needed anymore. Therefore, rather than converting pppol2tp_session_sock_hold() and pppol2tp_session_sock_put(), we can just drop them.
--- net/l2tp/l2tp_ppp.c | 154 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 101 insertions(+), 53 deletions(-)
net/l2tp/l2tp_ppp.c +101 -53
@@ -122,8 +122,11 @@struct pppol2tp_session {int owner;/* pid that opened the socket */ -struct sock *sock;/* Pointer to the session +struct mutex sk_lock;/* Protects .sk */ +struct sock __rcu *sk;/* Pointer to the session * PPPoX socket */ +struct sock *__sk;/* Copy of .sk, for cleanup */ +struct rcu_head rcu;/* For asynchronous release */ struct sock *tunnel_sock;/* Pointer to the tunnel UDP * socket */ int flags;/* accessed by PPPIOCGFLAGS.
@@ -138,6 +141,24 @@ static const struct ppp_channel_ops pppostatic const struct proto_ops pppol2tp_ops; +/* Retrieves the pppol2tp socket associated to a session. +* A reference is held on the returned socket, so this function must be paired +* with sock_put(). +*/ +static struct sock *pppol2tp_session_get_sock (struct l2tp_session *session) +{ +struct pppol2tp_session *ps =l2tp_session_priv (session); +struct sock *sk; + +rcu_read_lock (); + sk =rcu_dereference (ps->sk); +if (sk) +sock_hold (sk); +rcu_read_unlock (); + +return sk; +} +/* Helpers to obtain tunnel/session contexts from sockets. */ static inline struct l2tp_session *pppol2tp_sock_to_session (struct sock *sk)
@@ -224,7 +245,8 @@ static void pppol2tp_recv(struct l2tp_se/* If the socket is bound, send it in to PPP's input queue. Otherwise * queue it on the session socket. */ - sk = ps->sock; +rcu_read_lock (); + sk =rcu_dereference (ps->sk);if (sk ==NULL ) goto no_sock;
@@ -262,30 +284,16 @@ static void pppol2tp_recv(struct l2tp_sekfree_skb (skb); } } +rcu_read_unlock ();return ; no_sock: +rcu_read_unlock ();l2tp_info (session,L2TP_MSG_DATA ,"%s: no socket\n" , session->name);kfree_skb (skb); } -static void pppol2tp_session_sock_hold (struct l2tp_session *session) -{ -struct pppol2tp_session *ps =l2tp_session_priv (session); - -if (ps->sock) -sock_hold (ps->sock); -} - -static void pppol2tp_session_sock_put (struct l2tp_session *session) -{ -struct pppol2tp_session *ps =l2tp_session_priv (session); - -if (ps->sock) -sock_put (ps->sock); -} -/************************************************************************ * Transmit handling ***********************************************************************/
@@ -446,14 +454,16 @@ abort:*/ static void pppol2tp_session_close (struct l2tp_session *session) { -struct pppol2tp_session *ps =l2tp_session_priv (session); -struct sock *sk = ps->sock; -struct socket *sock = sk->sk_socket; +struct sock *sk;BUG_ON (session->magic !=L2TP_SESSION_MAGIC ); -if (sock) -inet_shutdown (sock,SEND_SHUTDOWN ); + sk =pppol2tp_session_get_sock (session); +if (sk) { +if (sk->sk_socket) +inet_shutdown (sk->sk_socket,SEND_SHUTDOWN ); +sock_put (sk); + }/* Don't let the session go away before our socket does */ l2tp_session_inc_refcount (session);
@@ -476,6 +486,14 @@ static void pppol2tp_session_destruct(st } } +static void pppol2tp_put_sk (struct rcu_head *head) +{ +struct pppol2tp_session *ps; + + ps =container_of (head,typeof (*ps), rcu); +sock_put (ps->__sk); +} +/* Called when the PPPoX socket (session) is closed. */ static int pppol2tp_release (struct socket *sock)
@@ -501,11 +519,24 @@ static int pppol2tp_release(struct socke session =pppol2tp_sock_to_session (sk); -/* Purge any queued data */ if (session !=NULL ) { +struct pppol2tp_session *ps; +__l2tp_session_unhash (session);l2tp_session_queue_purge (session); -sock_put (sk); + + ps =l2tp_session_priv (session); +mutex_lock (&ps->sk_lock); + ps->__sk =rcu_dereference_protected (ps->sk, +lockdep_is_held (&ps->sk_lock)); +RCU_INIT_POINTER (ps->sk,NULL ); +mutex_unlock (&ps->sk_lock); +call_rcu (&ps->rcu, pppol2tp_put_sk); + +/* Rely on the sock_put() call at the end of the function for +* dropping the reference held by pppol2tp_sock_to_session(). +* The last reference will be dropped by pppol2tp_put_sk(). +*/ }release_sock (sk);
@@ -572,12 +603,14 @@ out:static void pppol2tp_show (struct seq_file *m,void *arg) {struct l2tp_session *session = arg; -struct pppol2tp_session *ps =l2tp_session_priv (session); +struct sock *sk; + + sk =pppol2tp_session_get_sock (session); +if (sk) { +struct pppox_sock *po =pppox_sk (sk); -if (ps) { -struct pppox_sock *po =pppox_sk (ps->sock); -if (po) -seq_printf (m," interface %s\n" ,ppp_dev_name (&po->chan)); +seq_printf (m," interface %s\n" ,ppp_dev_name (&po->chan)); +sock_put (sk); } }#endif
@@ -715,13 +748,17 @@ static int pppol2tp_connect(struct socke/* Using a pre-existing session is fine as long as it hasn't * been connected yet. */ -if (ps->sock) { +mutex_lock (&ps->sk_lock); +if (rcu_dereference_protected (ps->sk, +lockdep_is_held (&ps->sk_lock))) { +mutex_unlock (&ps->sk_lock); error = -EEXIST ; goto end; }/* consistency checks */ if (ps->tunnel_sock != tunnel->sock) { +mutex_unlock (&ps->sk_lock); error = -EEXIST ; goto end; }
@@ -738,19 +775,21 @@ static int pppol2tp_connect(struct socke goto end; } + ps =l2tp_session_priv (session); +mutex_init (&ps->sk_lock);l2tp_session_inc_refcount (session); + +mutex_lock (&ps->sk_lock); error =l2tp_session_register (session, tunnel);if (error <0 ) { +mutex_unlock (&ps->sk_lock);kfree (session); goto end; } drop_refcnt = true; } -/* Associate session with its PPPoL2TP socket */ - ps =l2tp_session_priv (session); ps->owner = current->pid; - ps->sock = sk; ps->tunnel_sock = tunnel->sock; session->recv_skb = pppol2tp_recv;
@@ -759,12 +798,6 @@ static int pppol2tp_connect(struct socke session->show = pppol2tp_show;#endif -/* We need to know each time a skb is dropped from the reorder -* queue. -*/ - session->ref = pppol2tp_session_sock_hold; - session->deref = pppol2tp_session_sock_put; -/* If PMTU discovery was enabled, use the MTU that was discovered */ dst =sk_dst_get (tunnel->sock);if (dst !=NULL ) {
@@ -798,12 +831,17 @@ static int pppol2tp_connect(struct socke po->chan.mtu = session->mtu; error =ppp_register_net_channel (sock_net (sk), &po->chan); -if (error) +if (error) { +mutex_unlock (&ps->sk_lock); goto end; + } out_no_ppp:/* This is how we get the session context from the socket. */ sk->sk_user_data = session; +rcu_assign_pointer (ps->sk, sk); +mutex_unlock (&ps->sk_lock); + sk->sk_state =PPPOX_CONNECTED ;l2tp_info (session,L2TP_MSG_CONTROL ,"%s: created\n" , session->name);
@@ -849,6 +887,7 @@ static int pppol2tp_session_create(struc } ps =l2tp_session_priv (session); +mutex_init (&ps->sk_lock); ps->tunnel_sock = tunnel->sock; error =l2tp_session_register (session, tunnel);
@@ -1020,12 +1059,10 @@ static int pppol2tp_session_ioctl(struct"%s: pppol2tp_session_ioctl(cmd=%#x, arg=%#lx)\n" , session->name, cmd, arg); - sk = ps->sock; + sk =pppol2tp_session_get_sock (session);if (!sk)return -EBADR ; -sock_hold (sk); -switch (cmd) {case SIOCGIFMTU : err = -ENXIO ;
@@ -1301,7 +1338,6 @@ static int pppol2tp_session_setsockopt(s int optname, int val) {int err =0 ; -struct pppol2tp_session *ps =l2tp_session_priv (session);switch (optname) {case PPPOL2TP_SO_RECVSEQ :
@@ -1322,8 +1358,8 @@ static int pppol2tp_session_setsockopt(s } session->send_seq = val ?-1 :0 ; { -struct sock *ssk = ps->sock; -struct pppox_sock *po =pppox_sk (ssk); +struct pppox_sock *po =pppox_sk (sk); + po->chan.hdrlen = val ?PPPOL2TP_L2TP_HDR_SIZE_SEQ :PPPOL2TP_L2TP_HDR_SIZE_NOSEQ ; }
@@ -1659,8 +1695,9 @@ static void pppol2tp_seq_session_show(st {struct l2tp_session *session = v;struct l2tp_tunnel *tunnel = session->tunnel; -struct pppol2tp_session *ps =l2tp_session_priv (session); -struct pppox_sock *po =pppox_sk (ps->sock); +unsigned char state; +char user_data_ok; +struct sock *sk;u32 ip =0 ;u16 port =0 ;
@@ -1670,6 +1707,15 @@ static void pppol2tp_seq_session_show(st port =ntohs (inet->inet_sport); } + sk =pppol2tp_session_get_sock (session); +if (sk) { + state = sk->sk_state; + user_data_ok = (session == sk->sk_user_data) ?'Y' :'N' ; + }else { + state =0 ; + user_data_ok ='N' ; + } + seq_printf(m, " SESSION '%s' %08X/%d %04X/%04X -> " "%04X/%04X %d %c\n", session->name, ip, port,
@@ -1677,9 +1723,7 @@ static void pppol2tp_seq_session_show(st session->session_id, tunnel->peer_tunnel_id, session->peer_session_id, - ps->sock->sk_state, - (session == ps->sock->sk_user_data) ? - 'Y' : 'N'); + state, user_data_ok); seq_printf(m, " %d/%d/%c/%c/%s %08x %u\n", session->mtu, session->mru, session->recv_seq ? 'R' : '-',
@@ -1696,8 +1740,12 @@ static void pppol2tp_seq_session_show(statomic_long_read (&session->stats.rx_bytes), atomic_long_read(&session->stats.rx_errors)); -if (po) +if (sk) { +struct pppox_sock *po =pppox_sk (sk); +seq_printf (m," interface %s\n" ,ppp_dev_name (&po->chan)); +sock_put (sk); + } }static int pppol2tp_seq_show (struct seq_file *m,void *v)
Greg Kroah-Hartman
maintainerPATCH 60/65 l2tp: initialise PPP sessions before registering them
In reply to Greg Kroah-HartmanFrom: Guillaume Nault <[email protected]>
commit f98be6c6359e7e4a61aaefb9964c1db31cb9ec0c upstream.
pppol2tp_connect() initialises L2TP sessions after they've been exposed to the rest of the system by l2tp_session_register(). This puts sessions into transient states that are the source of several races, in particular with session's deletion path.
This patch centralises the initialisation code into pppol2tp_session_init(), which is called before the registration phase. The only field that can't be set before session registration is the pppol2tp socket pointer, which has already been converted to RCU. So pppol2tp_connect() should now be race-free.
The session's .session_close() callback is now set before registration. Therefore, it's always called when l2tp_core deletes the session, even if it was created by pppol2tp_session_create() and hasn't been plugged to a pppol2tp socket yet. That'd prevent session free because the extra reference taken by pppol2tp_session_close() wouldn't be dropped by the socket's ->sk_destruct() callback (pppol2tp_session_destruct()). We could set .session_close() only while connecting a session to its pppol2tp socket, or teach pppol2tp_session_close() to avoid grabbing a reference when the session isn't connected, but that'd require adding some form of synchronisation to be race free.
Instead of that, we can just let the pppol2tp socket hold a reference on the session as soon as it starts depending on it (that is, in pppol2tp_connect()). Then we don't need to utilise pppol2tp_session_close() to hold a reference at the last moment to prevent l2tp_core from dropping it.
When releasing the socket, pppol2tp_release() now deletes the session using the standard l2tp_session_delete() function, instead of merely removing it from hash tables. l2tp_session_delete() drops the reference the sessions holds on itself, but also makes sure it doesn't remove a session twice. So it can safely be called, even if l2tp_core already tried, or is concurrently trying, to remove the session. Finally, pppol2tp_session_destruct() drops the reference held by the socket.
--- net/l2tp/l2tp_ppp.c | 69 ++++++++++++++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 31 deletions(-)
net/l2tp/l2tp_ppp.c +38 -31
@@ -464,9 +464,6 @@ static void pppol2tp_session_close(strucinet_shutdown (sk->sk_socket,SEND_SHUTDOWN );sock_put (sk); } - -/* Don't let the session go away before our socket does */ -l2tp_session_inc_refcount (session); }/* Really kill the session socket. (Called from sock_put() if
@@ -522,8 +519,7 @@ static int pppol2tp_release(struct sockeif (session !=NULL ) {struct pppol2tp_session *ps; -__l2tp_session_unhash (session); -l2tp_session_queue_purge (session); +l2tp_session_delete (session); ps =l2tp_session_priv (session);mutex_lock (&ps->sk_lock);
@@ -615,6 +611,35 @@ static void pppol2tp_show(struct seq_fil }#endif +static void pppol2tp_session_init (struct l2tp_session *session) +{ +struct pppol2tp_session *ps; +struct dst_entry *dst; + + session->recv_skb = pppol2tp_recv; + session->session_close = pppol2tp_session_close; +#if defined(CONFIG_L2TP_DEBUGFS ) || defined(CONFIG_L2TP_DEBUGFS_MODULE ) + session->show = pppol2tp_show; +#endif + + ps =l2tp_session_priv (session); +mutex_init (&ps->sk_lock); + ps->tunnel_sock = session->tunnel->sock; + ps->owner = current->pid; + +/* If PMTU discovery was enabled, use the MTU that was discovered */ + dst =sk_dst_get (session->tunnel->sock); +if (dst) { +u32 pmtu =dst_mtu (dst); + +if (pmtu) { + session->mtu = pmtu -PPPOL2TP_HEADER_OVERHEAD ; + session->mru = pmtu -PPPOL2TP_HEADER_OVERHEAD ; + } +dst_release (dst); + } +} +/* connect() handler. Attach a PPPoX socket to a tunnel UDP socket */ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
@@ -626,7 +651,6 @@ static int pppol2tp_connect(struct sockestruct l2tp_session *session =NULL ;struct l2tp_tunnel *tunnel;struct pppol2tp_session *ps; -struct dst_entry *dst;struct l2tp_session_cfg cfg = {0 , };int error =0 ;u32 tunnel_id, peer_tunnel_id;
@@ -775,8 +799,8 @@ static int pppol2tp_connect(struct socke goto end; } +pppol2tp_session_init (session); ps =l2tp_session_priv (session); -mutex_init (&ps->sk_lock);l2tp_session_inc_refcount (session);mutex_lock (&ps->sk_lock);
@@ -789,26 +813,6 @@ static int pppol2tp_connect(struct socke drop_refcnt = true; } - ps->owner = current->pid; - ps->tunnel_sock = tunnel->sock; - - session->recv_skb = pppol2tp_recv; - session->session_close = pppol2tp_session_close; -#if defined(CONFIG_L2TP_DEBUGFS ) || defined(CONFIG_L2TP_DEBUGFS_MODULE ) - session->show = pppol2tp_show; -#endif - -/* If PMTU discovery was enabled, use the MTU that was discovered */ - dst =sk_dst_get (tunnel->sock); -if (dst !=NULL ) { -u32 pmtu =dst_mtu (dst); - -if (pmtu !=0 ) - session->mtu = session->mru = pmtu - -PPPOL2TP_HEADER_OVERHEAD ; -dst_release (dst); - } -/* Special case: if source & dest session_id == 0x0000, this * socket is being created to manage the tunnel. Just set up * the internal context for use by ioctl() and sockopt()
@@ -842,6 +846,12 @@ out_no_ppp:rcu_assign_pointer (ps->sk, sk);mutex_unlock (&ps->sk_lock); +/* Keep the reference we've grabbed on the session: sk doesn't expect +* the session to disappear. pppol2tp_session_destruct() is responsible +* for dropping it. +*/ + drop_refcnt = false; + sk->sk_state =PPPOX_CONNECTED ;l2tp_info (session,L2TP_MSG_CONTROL ,"%s: created\n" , session->name);
@@ -863,7 +873,6 @@ static int pppol2tp_session_create(struc {int error;struct l2tp_session *session; -struct pppol2tp_session *ps;/* Error if tunnel socket is not prepped */ if (!tunnel->sock) {
@@ -886,9 +895,7 @@ static int pppol2tp_session_create(struc goto err; } - ps =l2tp_session_priv (session); -mutex_init (&ps->sk_lock); - ps->tunnel_sock = tunnel->sock; +pppol2tp_session_init (session); error =l2tp_session_register (session, tunnel);if (error <0 )
Greg Kroah-Hartman
maintainerPATCH 61/65 Revert "gfs2: Dont demote a glock until its revokes are written"
In reply to Greg Kroah-HartmanFrom: Bob Peterson <[email protected]>
[ Upstream commit b14c94908b1b884276a6608dea3d0b1b510338b7 ]
This reverts commit df5db5f9ee112e76b5202fbc331f990a0fc316d6.
This patch fixes a regression: patch df5db5f9ee112 allowed function run_queue() to bypass its call to do_xmote() if revokes were queued for the glock. That's wrong because its call to do_xmote() is what is responsible for calling the go_sync() glops functions to sync both the ail list and any revokes queued for it. By bypassing the call, gfs2 could get into a stand-off where the glock could not be demoted until its revokes are written back, but the revokes would not be written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like the log flush daemon (logd) that can sync the ail items and revokes, if it deems it necessary. The problem is: without file system pressure, it might never deem it necessary.
--- fs/gfs2/glock.c | 3 --- 1 file changed, 3 deletions(-)
fs/gfs2/glock.c +0 -3
@@ -541,9 +541,6 @@ __acquires(&gl->gl_lockref.lock) goto out_unlock;if (nonblock) goto out_sched; -smp_mb (); -if (atomic_read (&gl->gl_revokes) !=0 ) - goto out_sched;set_bit (GLF_DEMOTE_IN_PROGRESS , &gl->gl_flags);GLOCK_BUG_ON (gl, gl->gl_demote_state ==LM_ST_EXCLUSIVE ); gl->gl_target = gl->gl_demote_state;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 62/65 staging: iio: ad2s1210: Fix SPI reading
In reply to Greg Kroah-HartmanFrom: Dragos Bogdan <[email protected]>
commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream.
If the serial interface is used, the 8-bit address should be latched using the rising edge of the WR/FSYNC signal.
This basically means that a CS change is required between the first byte sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers with a single byte, and CS change in-between.
Note fixes tag is not accurate, but reflects a point beyond which there are too many refactors to make backporting straight forward.
--- drivers/staging/iio/resolver/ad2s1210.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/staging/iio/resolver/ad2s1210.c +12 -5
@@ -125,17 +125,24 @@ static int ad2s1210_config_write(structstatic int ad2s1210_config_read (struct ad2s1210_state *st,unsigned char address) { -struct spi_transfer xfer = { - .len =2 , - .rx_buf = st->rx, - .tx_buf = st->tx, +struct spi_transfer xfers[] = { + { + .len =1 , + .rx_buf = &st->rx[0 ], + .tx_buf = &st->tx[0 ], + .cs_change =1 , + }, { + .len =1 , + .rx_buf = &st->rx[1 ], + .tx_buf = &st->tx[1 ], + }, };int ret =0 ;ad2s1210_set_mode (MOD_CONFIG , st); st->tx[0 ] = address |AD2S1210_MSB_IS_HIGH ; st->tx[1 ] =AD2S1210_REG_FAULT ; - ret =spi_sync_transfer (st->sdev, &xfer,1 ); + ret =spi_sync_transfer (st->sdev, xfers,2 );if (ret <0 )return ret; st->old_data = true;
Greg Kroah-Hartman
maintainerPATCH 63/65 mei: release me_cl object reference
In reply to Greg Kroah-HartmanFrom: Alexander Usyskin <[email protected]>
commit fc9c03ce30f79b71807961bfcb42be191af79873 upstream.
Allow me_cl object to be freed by releasing the reference that was acquired by one of the search functions:__mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid()
--- drivers/misc/mei/client.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/misc/mei/client.c +2 -0
@@ -276,6 +276,7 @@ void mei_me_cl_rm_by_uuid(struct mei_devdown_write (&dev->me_clients_rwsem); me_cl =__mei_me_cl_by_uuid (dev, uuid);__mei_me_cl_del (dev, me_cl); +mei_me_cl_put (me_cl);up_write (&dev->me_clients_rwsem); }
@@ -297,6 +298,7 @@ void mei_me_cl_rm_by_uuid_id(struct mei_down_write (&dev->me_clients_rwsem); me_cl =__mei_me_cl_by_uuid_id (dev, uuid, id);__mei_me_cl_del (dev, me_cl); +mei_me_cl_put (me_cl);up_write (&dev->me_clients_rwsem); }
Greg Kroah-Hartman
maintainerPATCH 64/65 iio: sca3000: Remove an erroneous get_device()
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit 928edefbc18cd8433f7df235c6e09a9306e7d580 ]
This looks really unusual to have a 'get_device()' hidden in a 'dev_err()' call.
Remove it.
While at it add a missing \n at the end of the message.
--- drivers/staging/iio/accel/sca3000_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/iio/accel/sca3000_ring.c +1 -1
@@ -56,7 +56,7 @@ static int sca3000_read_data(struct sca3000_state *st, st->tx[0 ] =SCA3000_READ_REG (reg_address_high); ret =spi_sync_transfer (st->us, xfer,ARRAY_SIZE (xfer));if (ret) { -dev_err (get_device (&st->us->dev),"problem reading register" ); +dev_err (&st->us->dev,"problem reading register" ); goto error_free_rx; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 65/65 l2tp: device MTU setup, tunnel socket needs a lock
In reply to Greg Kroah-HartmanFrom: R. Parameswaran <[email protected]>
commit 57240d007816486131bee88cd474c2a71f0fe224 upstream.
The MTU overhead calculation in L2TP device set-up merged via commit b784e7ebfce8cfb16c6f95e14e8532d0768ab7ff needs to be adjusted to lock the tunnel socket while referencing the sub-data structures to derive the socket's IP overhead.
--- include/linux/net.h | 2 +- net/l2tp/l2tp_eth.c | 2 ++ net/socket.c | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-)
include/linux/net.h +1 -1
@@ -291,7 +291,7 @@ int kernel_sendpage(struct socket *sock,int kernel_sock_ioctl (struct socket *sock,int cmd,unsigned long arg);int kernel_sock_shutdown (struct socket *sock,enum sock_shutdown_cmd how); -/* Following routine returns the IP overhead imposed by a socket. */ +/* Routine returns the IP overhead imposed by a (caller-protected) socket. */ u32 kernel_sock_ip_overhead (struct sock *sk);#define MODULE_ALIAS_NETPROTO (proto) \
net/l2tp/l2tp_eth.c +2 -0
@@ -240,7 +240,9 @@ static void l2tp_eth_adjust_mtu(struct l dev->needed_headroom += session->hdr_len;return ; } +lock_sock (tunnel->sock); l3_overhead =kernel_sock_ip_overhead (tunnel->sock); +release_sock (tunnel->sock);if (l3_overhead ==0 ) {/* L3 Overhead couldn't be identified, this could be * because tunnel->sock was NULL or the socket's
net/socket.c +1 -1
@@ -3308,7 +3308,7 @@ EXPORT_SYMBOL(kernel_sock_shutdown);/* This routine returns the IP overhead imposed by a socket i.e. * the length of the underlying IP header, depending on whether * this is an IPv4 or IPv6 socket and the length from IP options turned -* on at the socket. +* on at the socket. Assumes that the caller has a lock on the socket. */ u32 kernel_sock_ip_overhead (struct sock *sk) {
Jon Hunter
maintainerQuoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.225 release. There are 65 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 28 May 2020 18:36:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.225-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.4:
6 builds: 6 pass, 0 fail
12 boots: 12 pass, 0 fail
19 tests: 19 pass, 0 failLinux version: 4.4.225-rc1-g1f47601a4296
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra30-cardhu-a04
Cheers
Jon
Signature · 1 line
nvpublic
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.225 release. There are 65 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 28 May 2020 18:36:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.225-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.225-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 147ece171c0dc02b417f35088182a61e6dac368a
git describe: v4.4.224-66-g147ece171c0d
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.224-66-g147ece171c0d
No regressions (compared to build v4.4.224)
No fixes (compared to build v4.4.224)
Ran 15012 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest/net
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
Summary
------------------------------------------------------------------------
kernel: 4.4.225-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.225-rc1-hikey-20200526-731
git commit: f578d6e82f6756e9b9385131e4bef87a9fe5483f
git describe: 4.4.225-rc1-hikey-20200526-731
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.225-rc1-hikey-20200526-731
No regressions (compared to build 4.4.225-rc1-hikey-20200525-730)
No fixes (compared to build 4.4.225-rc1-hikey-20200525-730)
Ran 305 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-ipc-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* spectre-meltdown-checker-test
Signature · 2 lines
Linaro LKFT https://lkft.linaro.org
Good morning Greg,
Quoted 8 lines
From: [email protected] <[email protected]> On Behalf Of Greg Kroah-Hartman
Sent: 26 May 2020 19:52This is the start of the stable review cycle for the 4.4.225 release. There are 65 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
No build/boot issues seen for CIP configs for Linux 4.4.225-rc1 (147ece171c0d).
Build/test pipeline/logs: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/149870001
GitLab CI pipeline: https://gitlab.com/cip-project/cip-testing/linux-cip-pipelines/-/blob/master/trees/linux-4.14.y.yml
Relevant LAVA jobs: https://lava.ciplatform.org/scheduler/alljobs?length=25&search=147ece#table
Kind regards, Chris
Quoted 267 lines
Responses should be made by Thu, 28 May 2020 18:36:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-
review/patch-4.4.225-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-
rc.git linux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:Greg Kroah-Hartman <[email protected]>
Linux 4.4.225-rc1R. Parameswaran <[email protected]>
l2tp: device MTU setup, tunnel socket needs a lockChristophe JAILLET <[email protected]>
iio: sca3000: Remove an erroneous 'get_device()'Alexander Usyskin <[email protected]>
mei: releaseme_clobject referenceDragos Bogdan <[email protected]>
staging: iio: ad2s1210: Fix SPI readingBob Peterson <[email protected]>
Revert "gfs2: Don't demote a glock until its revokes are written"Guillaume Nault <[email protected]>
l2tp: initialise PPP sessions before registering themGuillaume Nault <[email protected]>
l2tp: protect sock pointer of structpppol2tp_sessionwith RCUGuillaume Nault <[email protected]>
l2tp: initialisel2tp_ethsessions before registering themGuillaume Nault <[email protected]>
l2tp: don't register sessions inl2tp_session_create()Guillaume Nault <[email protected]>
l2tp: fixl2tp_ethmodule loadingGuillaume Nault <[email protected]>
l2tp: pass tunnel pointer to ->session_create()Guillaume Nault <[email protected]>
l2tp: prevent creation of sessions on terminated tunnelsGuillaume Nault <[email protected]>
l2tp: hold tunnel used while creating sessions with netlinkGuillaume Nault <[email protected]>
l2tp: hold tunnel while handling genlTUNNEL_GETcommandsGuillaume Nault <[email protected]>
l2tp: hold tunnel while handling genl tunnel updatesGuillaume Nault <[email protected]>
l2tp: hold tunnel while processing genl delete commandGuillaume Nault <[email protected]>
l2tp: hold tunnel while looking up sessions inl2tp_netlinkGuillaume Nault <[email protected]>
l2tp: initialise session's refcount before making it reachableGuillaume Nault <[email protected]>
l2tp: define parameters of l2tp_tunnel_find*() as "const"Guillaume Nault <[email protected]>
l2tp: define parameters of l2tp_session_get*() as "const"Guillaume Nault <[email protected]>
l2tp: removel2tp_session_find()Guillaume Nault <[email protected]>
l2tp: remove useless duplicate session detection inl2tp_netlinkR. Parameswaran <[email protected]>
L2TP:Adjust intf MTU, add underlay L3, L2 hdrs.R. Parameswaran <[email protected]>
New kernel function to get IP overhead on a socket.Asbjørn Sloth Tønnesen <[email protected]>
net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*Asbjørn Sloth Tønnesen <[email protected]>
net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*Asbjørn Sloth Tønnesen <[email protected]>
net: l2tp: export debug flags to UAPIGuillaume Nault <[email protected]>
l2tp: don't usel2tp_tunnel_find()inl2tp_ipandl2tp_ip6Guillaume Nault <[email protected]>
l2tp: take a reference on sessions used in genetlink handlersGuillaume Nault <[email protected]>
l2tp: hold session while sending creation notificationsGuillaume Nault <[email protected]>
l2tp: fix racy socket lookup inl2tp_ipandl2tp_ip6bind()Guillaume Nault <[email protected]>
l2tp: lock socket before checking flags inconnect()Vishal Verma <[email protected]>
libnvdimm/btt: Remove unnecessary code inbtt_freelist_initColin Ian King <[email protected]>
platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointerTheodore Ts'o <[email protected]>
ext4: lock the xattr block before checksuming itBrent Lu <[email protected]>
ALSA: pcm: fix incorrecthw_baseincreaseDaniel Jordan <[email protected]>
padata: purgeget_cpuandreorder_via_wqfrompadata_do_serialDaniel Jordan <[email protected]>
padata: initialize pd->cpu with effective cpumaskHerbert Xu <[email protected]>
padata: Replace delayed timer with immediate workqueue inpadata_reorderPeter Zijlstra <[email protected]>
sched/fair, cpumask: Exportfor_each_cpu_wrap()Mathias Krause <[email protected]>
padata: setcpu_indexof unused CPUs to -1Kevin Hao <[email protected]>
i2c: dev: Fix the race between the release ofi2c_devand cdevviresh kumar <[email protected]>
i2c-dev: don't get i2c adapter viai2c_devDan Carpenter <[email protected]>
i2c: dev: use after free in detachWolfram Sang <[email protected]>
i2c: dev: don't start function name with 'return'Erico Nunes <[email protected]>
i2c: dev: switch fromregister_chrdevto cdev APIShuah Khan <[email protected]>
media: fix media devnode ioctl/syscall and unregister raceShuah Khan <[email protected]>
media: fix use-after-free incdev_put()when app exits after driver unbindMauro Carvalho Chehab <[email protected]>
media-device: dynamically allocate structmedia_devnodeMauro Carvalho Chehab <[email protected]>
media-devnode: fix namespace messMax Kellermann <[email protected]>
media-devnode: add missing mutex lock in error handlerMax Kellermann <[email protected]>
drivers/media/media-devnode: clearprivate_databeforeput_device()Shuah Khan <[email protected]>
media: Fix media_open() to clear filp->private_data in error legThomas Gleixner <[email protected]>
ARM: futex: Address build warningHans de Goede <[email protected]>
platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TAAlan Stern <[email protected]>
USB: core: Fix misleading driver bug reportWu Bo <[email protected]>
ceph: fix double unlock inhandle_cap_export()Sebastian Reichel <[email protected]>
HID: multitouch: add eGalaxTouch P80H84 supportAl Viro <[email protected]>
fix multiplication overflow incopy_fdtable()Roberto Sassu <[email protected]>
evm: Check also if *tfm is an error pointer ininit_desc()Mathias Krause <[email protected]>
padata: ensurepadata_do_serial()runs on the correct CPUMathias Krause <[email protected]>
padata: ensure the reorder timer callback runs on the correct CPUJason A. Donenfeld <[email protected]>
padata:get_nextis never NULLTobias Klauser <[email protected]>
padata: Remove unused but set variablesCao jin <[email protected]>
igb: use igb_adapter->io_addr instead of e1000_hw->hw_addr-------------
Diffstat:
Documentation/networking/l2tp.txt | 8 +- Makefile | 4 +- arch/arm/include/asm/futex.h | 9 +- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-multitouch.c | 3 + drivers/i2c/i2c-dev.c | 60 +++--- drivers/media/media-device.c | 43 +++-- drivers/media/media-devnode.c | 168 +++++++++------- drivers/media/usb/uvc/uvc_driver.c | 2 +- drivers/misc/mei/client.c | 2 + drivers/net/ethernet/intel/igb/igb_main.c | 4 +- drivers/nvdimm/btt.c | 8 +- drivers/platform/x86/alienware-wmi.c | 17 +- drivers/platform/x86/asus-nb-wmi.c | 24 +++ drivers/staging/iio/accel/sca3000_ring.c | 2 +- drivers/staging/iio/resolver/ad2s1210.c | 17 +- drivers/usb/core/message.c | 4 +- fs/ceph/caps.c | 1 + fs/ext4/xattr.c | 66 ++++--- fs/file.c | 2 +- fs/gfs2/glock.c | 3 - include/linux/cpumask.h | 17 ++ include/linux/net.h | 3 + include/linux/padata.h | 13 +- include/media/media-device.h | 5 +- include/media/media-devnode.h | 32 +++- include/net/ipv6.h | 2 + include/uapi/linux/if_pppol2tp.h | 13 +- include/uapi/linux/l2tp.h | 17 +- kernel/padata.c | 88 ++++----- lib/cpumask.c | 32 ++++ net/ipv6/datagram.c | 4 +- net/l2tp/l2tp_core.c | 181 ++++++----------- net/l2tp/l2tp_core.h | 47 +++-- net/l2tp/l2tp_eth.c | 216 +++++++++++++-------- net/l2tp/l2tp_ip.c | 68 ++++--- net/l2tp/l2tp_ip6.c | 82 ++++---- net/l2tp/l2tp_netlink.c | 124 +++++++----- net/l2tp/l2tp_ppp.c | 309 ++++++++++++++++++------------ net/socket.c | 46 +++++ security/integrity/evm/evm_crypto.c | 2 +- sound/core/pcm_lib.c | 1 + 42 files changed, 1014 insertions(+), 736 deletions(-)
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.225 release. There are 65 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 28 May 2020 18:36:22 +0000. Anything received after that time might be too late.
Build results:
total: 169 pass: 169 fail: 0 Qemu test results: total: 332 pass: 332 fail: 0
Guenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.225 release. There are 65 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 28 May 2020 18:36:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.225-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah