imx: add i.MX8M Nano EVK board support
v4 cover imx: add i.MX8M Nano EVK board support
This series adds support for the NXP i.MX8M Nano EVK board.
Since the i.MX8M Nano CPU was added for the Nitrogen8MNano board, which has a type of memory (LPDDR4) different from the NXP reference board (DDR4), the first half of the series introduce the DDR training selection for the whole i.MX8 M SoC family, as well as a separation of the DDR and HDMI FW copy.
The second half of the series adds support for i.MX8M Nano EVK Board with kernel/ U-Boot based on 4.19.35_1.1.0, which is the current preferred version for all NXP reference boards.
Stephane Viau (5):
package/freescale-imx: Add option for DDR FW need package/freescale-imx/firmware-imx: add choice for DDR training
binaries
board/freescale/common/imx: use generic ddr_fw.bin name board/freescale/common/imx: add support for i.MX8M Nano configs/freescale_imx8mnevk: new defconfig
.gitlab-ci.yml | 1 + DEVELOPERS | 4 ++ .../common/imx/imx8-bootloader-prepare.sh | 6 +- board/freescale/common/imx/post-image.sh | 2 + board/freescale/imx8mnevk/readme.txt | 73 ++++++++++++++++++++++ configs/freescale_imx8mnevk_defconfig | 43 +++++++++++++ package/freescale-imx/Config.in | 6 ++ package/freescale-imx/firmware-imx/Config.in | 24 +++++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 43 ++++++++++++- 9 files changed, 197 insertions(+), 5 deletions(-) create mode 100644 board/freescale/imx8mnevk/readme.txt create mode 100644 configs/freescale_imx8mnevk_defconfig
Signature · 1 line
2.7.4
PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
---
v4:
- add Gary's reviewed-by
v3:
- let the others 'select' this newly introduced option instead of 'default y' it. I believe this option is still required since we only want to choose a DDR binary for the i.MX 8M platforms. (Yann/Gary)
v2:
- introduce BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR firmware selection to the whole i.MX 8M family (suggested by Gary)
--- package/freescale-imx/Config.in | 6 ++++++ 1 file changed, 6 insertions(+)
package/freescale-imx/Config.in +6 -0
@@ -45,12 +45,15 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M bool "imx8m" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM bool "imx8mm" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN bool "imx8mn" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X bool "imx8x"
@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X +config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW + bool + source "package/freescale-imx/imx-alsa-plugins/Config.in" source "package/freescale-imx/imx-codec/Config.in" source "package/freescale-imx/imx-kobs/Config.in"
Signature · 1 line
2.7.4
PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need
Stephane, All
On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:
Quoted 43 lines
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
Suggested-by Julien Olivain <[email protected]>Signed-off-by Stephane Viau <[email protected]>Reviewed-by Gary Bisson <[email protected]>---
v4:
- add Gary's reviewed-by
v3:
- let the others 'select' this newly introduced option instead of 'default y' it. I believe this option is still required since we only want to choose a DDR binary for the i.MX 8M platforms. (Yann/Gary)
v2:
- introduceBR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FWto extend the DDR firmware selection to the whole i.MX 8M family (suggested by Gary)Signed-off-by Stephane Viau <[email protected]>--- package/freescale-imx/Config.in | 6 ++++++ 1 file changed, 6 insertions(+)package/freescale-imx/Config.in +3
-0@@ -45,12 +45,15 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M bool "imx8m" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM bool "imx8mm" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN bool "imx8mn" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X bool "imx8x"
package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103
Quoted 5 lines
package/freescale-imx/Config.in +2
-0@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X +config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW + bool
Now that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.
Pelase review the commit to check I haven't totally borked the thing:
https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6
Thanks.
Quoted 10 lines
package/freescale-imx/Config.in +0
-0source "package/freescale-imx/imx-alsa-plugins/Config.in" source "package/freescale-imx/imx-codec/Config.in" source "package/freescale-imx/imx-kobs/Config.in"Signature · 6 lines
2.7.4 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need
Quoted 2 lines
Stephane, All
Hello Yann,
Quoted 48 lines
On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:
Quoted 46 lines
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
Suggested-by Julien Olivain <[email protected]>Signed-off-by Stephane Viau <[email protected]>Reviewed-by Gary Bisson <[email protected]>---
v4:
- add Gary's reviewed-by
v3:
- let the others 'select' this newly introduced option instead of 'default y' it. I believe this option is still required since we only want to choose a DDR binary for the i.MX 8M platforms. (Yann/Gary)
v2:
- introduceBR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FWto extend the DDR firmware selection to the whole i.MX 8M family (suggested by Gary)Signed-off-by Stephane Viau <[email protected]>--- package/freescale-imx/Config.in | 6 ++++++ 1 file changed, 6 insertions(+)package/freescale-imx/Config.in +3
-0@@ -45,12 +45,15 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M bool "imx8m" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM bool "imx8mm" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN bool "imx8mn" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X bool "imx8x"@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
Quoted 7 lines
package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103
Quoted 2 lines
package/freescale-imx/Config.in +2
-0+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW + boolNow that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.
Quite tempting, indeed.
I have actually proposed this in my v2 series, in which Gary made these comments:
[1]:
"
And here is why I'm worried the name of the previous variable might be misleading. You don't only copy the DDR FW training under that BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4 macro, you also copy the HDMI FW. Note that the DP FW should be added as well.
"
and [2]:
" I would still keep the 'if IMX8M' around the whole block that is only for iMX8M. "
... which I did agree with and reverted back to using the whole SoC list instead.
Also, the _ifeq_ part of this _if_ statement mentions another SoC (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X): it makes thus more sense to use the i.MX 8M SoC list in the former part, doesn't it?
[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-May/283442.html
Thanks,
Stephane.
Quoted 25 lines
Pelase review the commit to check I haven't totally borked the thing:
https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6Thanks.
Quoted 10 lines
package/freescale-imx/Config.in +0
-1source "package/freescale-imx/imx-alsa-plugins/Config.in" source "package/freescale-imx/imx-codec/Config.in" source "package/freescale-imx/imx-kobs/Config.in" --2.7.4
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot--
.-----------------.--------------------.------------------.--------------------.| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |'------------------------------^-------^------------------^--------------------'
PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need
Stephane, All,
On 2020-06-02 07:32 +0000, Stephane Viau (OSS) spake thusly:
Quoted 3 lines
Quoted 3 lines
On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:
Quoted 2 lines
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
[--SNIP--]
Quoted 24 lines
Quoted 18 lines
Quoted 18 lines
config
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
bool "imx8m"package/freescale-imx/Config.in +3
-0+ select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM bool "imx8mm" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN bool "imx8mn" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X bool "imx8x"@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8XQuoted 6 lines
package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103
Quoted 2 lines
package/freescale-imx/Config.in +2
-0+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW + boolNow that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.
Quoted 8 lines
Quite tempting, indeed.
I have actually proposed this in my v2 series, in which Gary made these comments:
[1]:
"
And here is why I'm worried the name of the previous variable might be misleading. You don't only copy the DDR FW training under thatBR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4macro, you also copy the HDMI FW. Note that the DP FW should be added as well.
The macro copying the HDMI FW can indeed be moved out of the conditional block, indeed. But this commit 6bb7f3b8109 I amended when applying does not change the behaviour at all.
Quoted 6 lines
and [2]:
" I would still keep the 'if IMX8M' around the whole block that is only for iMX8M. "... which I did agree with and reverted back to using the whole SoC list instead.
Ah, but that's not what I discussed with Gary on IRC the other day when he asked for my input. I suggested exactly to switch to using the new variable.
Quoted 3 lines
Also, the _ifeq_ part of this _if_ statement mentions another SoC (
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X): it makes thus more sense to use the i.MX 8M SoC list in the former part, doesn't it?
Oh, I see what you mean. I also had a mixed feelings about it, but this is not so much an issue. Semantically, that is OK (IMHO) to have succeeding conditionals that test various things...
But looking at the big picture again, I see potential for a further simple (semantic) cleanup:
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 9fd1c54b48..3239e432da 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -18,7 +18,16 @@ define FIRMWARE_IMX_EXTRACT_CMDS
$(call FREESCALE_IMX_EXTRACT_HELPER,$(FIRMWARE_IMX_DL_DIR)/$(FIRMWARE_IMX_SOURCE))
endef
+ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
+FIRMWARE_IMX_INSTALL_IMAGES = YES
+define FIRMWARE_IMX_PREPARE_HDMI_FW
+ cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
+ $(BINARIES_DIR)/signed_hdmi_imx8m.bin
+endef
+endif # PLATFORM_IMX8M
+
ifeq ($(BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW),y)
+FIRMWARE_IMX_INSTALL_TARGET = NO
FIRMWARE_IMX_INSTALL_IMAGES = YES
ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4),y)
@@ -46,6 +55,8 @@ define FIRMWARE_IMX_PREPARE_DDR_FW
$(BINARIES_DIR)/lpddr4_pmu_train_fw.bin
ln -sf $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin $(BINARIES_DIR)/ddr_fw.bin
endef
+
+# else DRFW_LPDDR4
else ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_DDR4),y)
FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
define FIRMWARE_IMX_PREPARE_DDR4_FW
@@ -71,28 +82,19 @@ define FIRMWARE_IMX_PREPARE_DDR_FW
$(BINARIES_DIR)/ddr4_201810_fw.bin
ln -sf $(BINARIES_DIR)/ddr4_201810_fw.bin $(BINARIES_DIR)/ddr_fw.bin
endef
-endif
+endif # DDRFW_LPDDR4 || DDRFW_DDR4
-ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
-define FIRMWARE_IMX_PREPARE_HDMI_FW
- cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
- $(BINARIES_DIR)/signed_hdmi_imx8m.bin
-endef
-endif
-
-define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
- $(FIRMWARE_IMX_PREPARE_DDR_FW)
- $(FIRMWARE_IMX_PREPARE_HDMI_FW)
-endef
+# else NEED_DDR_FW
else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y)
-define FIRMWARE_IMX_INSTALL_TARGET_CMDS
+define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X
$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_dec.bin \
$(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_dec.bin
$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_enc.bin \
$(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_enc.bin
endef
-else
-define FIRMWARE_IMX_INSTALL_TARGET_CMDS
+
+else # NEED_DDR_FW || PLATFORM_IMX8X
+define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC
mkdir -p $(TARGET_DIR)/lib/firmware/imx
for blobdir in $(FIRMWARE_IMX_BLOBS); do \
cp -r $(@D)/firmware/$${blobdir} $(TARGET_DIR)/lib/firmware; \
@@ -101,6 +103,16 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS
mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \
$(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw
endef
-endif
+endif # NEED_DDR_FW || PLATFORM_IMX8X || the rest
+
+define FIRMWARE_IMX_INSTALL_TARGET_CMDS
+ $(FIRMWARE_IMX_INSTALL_TARGET_CMDS_IM X8X)
+ $(FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC)
+endef
+
+define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
+ $(FIRMWARE_IMX_PREPARE_HDMI_FW)
+ $(FIRMWARE_IMX_PREPARE_DDR_FW)
+endef
$(eval $(generic-package))Care to look at that?
Regards,
Yann E. MORIN.
Quoted 31 lines
[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-May/283442.htmlThanks,
Stephane.Quoted 25 lines
Pelase review the commit to check I haven't totally borked the thing:
https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6Thanks.
Quoted 10 lines
package/freescale-imx/Config.in +0
-1source "package/freescale-imx/imx-alsa-plugins/Config.in" source "package/freescale-imx/imx-codec/Config.in" source "package/freescale-imx/imx-kobs/Config.in" --2.7.4
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot--
.-----------------.--------------------.------------------.--------------------.| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |'------------------------------^-------^------------------^--------------------'
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need
Quoted 1 line
Stephane, All,
Hi Yann,
Quoted 39 lines
On 2020-06-02 07:32 +0000, Stephane Viau (OSS) spake thusly:
Quoted 3 lines
Quoted 3 lines
On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:
Quoted 2 lines
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
[--SNIP--]
Quoted 24 lines
Quoted 18 lines
Quoted 18 lines
config
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
bool "imx8m"package/freescale-imx/Config.in +3
-0+ select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM bool "imx8mm" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN bool "imx8mn" + select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X bool "imx8x"@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8XQuoted 6 lines
package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103
Quoted 2 lines
package/freescale-imx/Config.in +2
-0+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW + boolNow that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.
Quoted 8 lines
Quite tempting, indeed.
I have actually proposed this in my v2 series, in which Gary made these comments:
[1]:
"
And here is why I'm worried the name of the previous variable might be misleading. You don't only copy the DDR FW training under thatBR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4macro, you also copy the HDMI FW. Note that the DP FW should be added as well.
Quoted 3 lines
The macro copying the HDMI FW can indeed be moved out of the conditional block, indeed. But this commit
6bb7f3b8109I amended when applying does not change the behaviour at all.
Agreed ; the behavior is the same.
Quoted 12 lines
Quoted 7 lines
and [2]:
" I would still keep the 'if IMX8M' around the whole block that is only for iMX8M. "... which I did agree with and reverted back to using the whole SoC list instead.
Ah, but that's not what I discussed with Gary on IRC the other day when he asked for my input. I suggested exactly to switch to using the new variable.
Quoted 7 lines
Quoted 3 lines
Also, the _ifeq_ part of this _if_ statement mentions another SoC (
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X): it makes thus more sense to use the i.MX 8M SoC list in the former part, doesn't it?Oh, I see what you mean. I also had a mixed feelings about it, but this is not so much an issue. Semantically, that is OK (IMHO) to have succeeding conditionals that test various things...
It sure works semantically but (IMO), if there are ways to avoid it, I'd rather avoid comparing apples and oranges ;-)
Quoted 3 lines
But looking at the big picture again, I see potential for a further simple (semantic) cleanup:
True. I see these major steps:
1.1) define FIRMWARE_IMX_PREPARE_HDMI_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)
1.2) define FIRMWARE_IMX_PREPARE_DDR_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)
1.3) define FIRMWARE_IMX_INSTALL_IMAGES_CMDS (based on the above FIRMWARE_IMX_PREPARE_xxx)
2.1) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X (+ set FIRMWARE_IMX_INSTALL_TARGET = YES)
2.2) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC (+ set FIRMWARE_IMX_INSTALL_TARGET = YES)
2.3) define FIRMWARE_IMX_INSTALL_TARGET_CMDS (based on the above FIRMWARE_IMX_INSTALL_TARGET_CMDS_xxx)
Quoted 10 lines
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 9fd1c54b48..3239e432da 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -18,7 +18,16 @@ define FIRMWARE_IMX_EXTRACT_CMDS
$(call FREESCALE_IMX_EXTRACT_HELPER,$(FIRMWARE_IMX_DL_DIR)/$(FIRMWARE_IMX_SOURCE))
endef
+ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)looks like we need a new "BR2_PACKAGE_FREESCALE_IMX_NEED_HDMI_FW" symbol here.
Quoted 6 lines
+FIRMWARE_IMX_INSTALL_IMAGES = YES
+defineFIRMWARE_IMX_PREPARE_HDMI_FW
+ cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
+ $(BINARIES_DIR)/signed_hdmi_imx8m.bin
+endef
+endif #PLATFORM_IMX8M
That is "1.1) define FIRMWARE_IMX_PREPARE_HDMI_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)"
Quoted 19 lines
+ ifeq ($(BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW),y) +FIRMWARE_IMX_INSTALL_TARGET = NO FIRMWARE_IMX_INSTALL_IMAGES = YESifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4),y) @@ -46,6 +55,8 @@ define FIRMWARE_IMX_PREPARE_DDR_FW $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin ln -sf $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin $(BINARIES_DIR)/ddr_fw.bin endef + +# else DRFW_LPDDR4 else ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_DDR4),y) FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys define FIRMWARE_IMX_PREPARE_DDR4_FW @@ -71,28 +82,19 @@ define FIRMWARE_IMX_PREPARE_DDR_FW $(BINARIES_DIR)/ddr4_201810_fw.bin ln -sf $(BINARIES_DIR)/ddr4_201810_fw.bin $(BINARIES_DIR)/ddr_fw.bin endef
Quoted 2 lines
-endif
+endif #DDRFW_LPDDR4||DDRFW_DDR4
That is "1.2) define FIRMWARE_IMX_PREPARE_DDR_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)"
I would rather _endif_ here in order to separate the whole NEED_DDR_FW stuff from the INSTALL_TARGET stuff ; even though if, today, NEED_DDR_FW is tightly coupled with the i.MX8M family (but probably shouldn't).
Quoted 13 lines
-ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y) -define FIRMWARE_IMX_PREPARE_HDMI_FW - cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \ - $(BINARIES_DIR)/signed_hdmi_imx8m.bin -endef -endif - -define FIRMWARE_IMX_INSTALL_IMAGES_CMDS - $(FIRMWARE_IMX_PREPARE_DDR_FW) - $(FIRMWARE_IMX_PREPARE_HDMI_FW) -endef +# else NEED_DDR_FW
Quoted 8 lines
else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y)
-define FIRMWARE_IMX_INSTALL_TARGET_CMDS
+define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X
$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_dec.bin \
$(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_dec.bin
$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_enc.bin \
$(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_enc.bin
endefThat is "2.1) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X" (we should also set FIRMWARE_IMX_INSTALL_TARGET = YES)
Quoted 4 lines
-else -define FIRMWARE_IMX_INSTALL_TARGET_CMDS + +else # NEED_DDR_FW || PLATFORM_IMX8X
Quoted 8 lines
+define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC
mkdir -p $(TARGET_DIR)/lib/firmware/imx
for blobdir in $(FIRMWARE_IMX_BLOBS); do \
cp -r $(@D)/firmware/$${blobdir} $(TARGET_DIR)/lib/firmware; \
@@ -101,6 +103,16 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS
mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \
$(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw
endefThat is "2.2) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC" (we should also set FIRMWARE_IMX_INSTALL_TARGET = YES)
Quoted 7 lines
-endif
+endif #NEED_DDR_FW||PLATFORM_IMX8X|| the rest +
+defineFIRMWARE_IMX_INSTALL_TARGET_CMDS
+ $(FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X)
+ $(FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC)
+endef
Good idea, indeed.
That is "2.3) define FIRMWARE_IMX_INSTALL_TARGET_CMDS (based on the above FIRMWARE_IMX_INSTALL_TARGET_CMDS_xxx)"
Quoted 5 lines
+
+defineFIRMWARE_IMX_INSTALL_IMAGES_CMDS
+ $(FIRMWARE_IMX_PREPARE_HDMI_FW)
+ $(FIRMWARE_IMX_PREPARE_DDR_FW)
+endef
That is "1.3) define FIRMWARE_IMX_INSTALL_IMAGES_CMDS (based on the above FIRMWARE_IMX_PREPARE_xxx)"
Quoted 4 lines
$(eval $(generic-package))Care to look at that?
Will do (and propose a patch for review soon).
BR,
Stephane.
Quoted 45 lines
Regards,
Yann E. MORIN.Quoted 31 lines
[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-May/283442.htmlThanks,
Stephane.Quoted 25 lines
Pelase review the commit to check I haven't totally borked the thing:
https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6Thanks.
Quoted 10 lines
package/freescale-imx/Config.in +0
-1source "package/freescale-imx/imx-alsa-plugins/Config.in" source "package/freescale-imx/imx-codec/Config.in" source "package/freescale-imx/imx-kobs/Config.in" --2.7.4
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot--
.-----------------.--------------------.------------------.--------------------.| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |'------------------------------^-------^------------------^--------------------'
--
.-----------------.--------------------.------------------.--------------------.| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |'------------------------------^-------^------------------^--------------------'
PATCH v4 2/5 package/freescale-imx/firmware-imx: add choice for DDR training binaries
In reply to Stephane ViauSeveral i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4, etc.), for which the DDR training is performed in the bootloader. Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4 (e.g.: NXP's reference board EVK). This patch allows the selection of either of the binaries used to train the DDR.
Note that DDR and HDMI FW copies are now separated, which makes latter being properly copied only for the relevant SoC (i.MX8MQ).
---
v4:
- Keep the 'if IMX8M...' around the whole block (Gary)
- Remove FIRMWARE_IMX_PREPARE_HDMI_FW empty definition (Gary)
v3:
- Use common FIRMWARE_IMX_INSTALL_IMAGES_CMDS for all i.MX8M platforms and let FIRMWARE_IMX_PREPARE_{DDR,HDMI}_FW be different according to the type of DDR mounted (BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW choice)
or the eventual presence of HDMI, which is SoC dependant. (Gary)
v2:
- use BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR firmware selection for 8M, 8MM and 8MN (suggested by Gary)
fixup! package/freescale-imx/firmware-imx: add choice for DDR training binaries
--- package/freescale-imx/firmware-imx/Config.in | 24 ++++++++++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 43 +++++++++++++++++++++- 2 files changed, 65 insertions(+), 2 deletions(-)
package/freescale-imx/firmware-imx/Config.in +24 -0
@@ -8,3 +8,27 @@ config BR2_PACKAGE_FIRMWARE_IMX This library is provided by Freescale as-is and doesn't have an upstream. + +if BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW + +choice + bool "DDR training binaries" + default BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4 + help + Choose the DDR training binaries to be used depending on the + kind of memory that is available on the target board (DDR4, + LPDDR4, etc...). + +config BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4 + bool "lpddr4" + help + Use LPDDR4 binaries (i.e.: lpddr4_pmu_train_*.bin) + +config BR2_PACKAGE_FIRMWARE_DDRFW_DDR4 + bool "DDR4" + help + Use DDR4 binaries (i.e.: ddr4_*_201810.bin). + +endchoice # DDR training FW + +endif
package/freescale-imx/firmware-imx/firmware-imx.mk +41 -2
64 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 2/5 package/freescale-imx/firmware-imx: add choice for DDR training binaries
Hi Stephane,
Thanks for the quick respin!
Quoted 6 lines · Stephane Viau
Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4, etc.), for which the DDR training is performed in the bootloader. Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4 (e.g.: NXP's reference board EVK). This patch allows the selection of either of the binaries used to train the DDR.
Quoted 7 lines
Note that DDR and HDMI FW copies are now separated, which makes latter being properly copied only for the relevant SoC (i.MX8MQ).
Suggested-by Gary Bisson <[email protected]>Signed-off-by Stephane Viau <[email protected]>Reviewed-by Maeva Manuel <[email protected]>Reviewed-by Julien Olivain <[email protected]>
Regards,
Gary
PATCH v4 3/5 board/freescale/common/imx: use generic ddr_fw.bin name
In reply to Stephane ViauFor some SoCs (i.e.: i.MX8M Nano for now), the DDR training firmware in the boot image depends on the type of memory installed on a board (LPDDR4, DDR4, etc...). The previous patch makes this firmware name agnostic of the DDR type and uses ddr_fw.bin as a generic name. This patch makes imx8-bootloader-prepare.sh use this generic name, independently of the kind board DDR type.
---
v4:
- add Gary's reviewed-by
v2:
- generic ddr_fw.bin name is now used also for 8M and 8MM, along with 8MN (suggested by Gary)
--- board/freescale/common/imx/imx8-bootloader-prepare.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
board/freescale/common/imx/imx8-bootloader-prepare.sh +3 -3
@@ -9,21 +9,21 @@ main () fi if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then - cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its ${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb rm -f ${BINARIES_DIR}/u-boot.its ${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then - cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its ${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb rm -f ${BINARIES_DIR}/u-boot.its ${HOST_DIR}/bin/mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then - cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00960000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its ${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb rm -f ${BINARIES_DIR}/u-boot.its
Signature · 1 line
2.7.4
PATCH v4 4/5 board/freescale/common/imx: add support for i.MX8M Nano
In reply to Stephane Viau--- board/freescale/common/imx/post-image.sh | 2 ++ 1 file changed, 2 insertions(+)
board/freescale/common/imx/post-image.sh +2 -0
@@ -38,6 +38,8 @@ genimage_type() echo "genimage.cfg.template_imx8" elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then echo "genimage.cfg.template_imx8" + elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then + echo "genimage.cfg.template_imx8" elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then echo "genimage.cfg.template_imx8" elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then
Signature · 1 line
2.7.4
PATCH v4 5/5 configs/freescale_imx8mnevk: new defconfig
In reply to Stephane ViauThis patch adds support for the i.MX8M Nano EVK Board [1].
The final boot image is created from uboot and firmware binaries in post image script board/freescale/common/imx/imx8-bootloader-prepare.sh
Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel configuration needs host-openssl to build.
---
v3:
- Remove hdmi bin from 8MN config now that this feature can easily be (re)set through FIRMWARE_IMX_PREPARE_HDMI_FW.
v2:
- reword commit title about uboot.imx generation: sentence removed (Gary)
- replace link which was confusing because mentioning LPD4 when DDR4 EVK is actually available (suggested by Gary)
--- .gitlab-ci.yml | 1 + DEVELOPERS | 4 ++ board/freescale/imx8mnevk/readme.txt | 73 +++++++++++++++++++++++++++++++++++ configs/freescale_imx8mnevk_defconfig | 43 +++++++++++++++++++++ 4 files changed, 121 insertions(+) create mode 100644 board/freescale/imx8mnevk/readme.txt create mode 100644 configs/freescale_imx8mnevk_defconfig
.gitlab-ci.yml +1 -0
@@ -190,6 +190,7 @@ freescale_imx8mmevk_defconfig: { extends: .defconfig } freescale_imx8mqevk_defconfig: { extends: .defconfig } freescale_imx8qmmek_defconfig: { extends: .defconfig } freescale_imx8qxpmek_defconfig: { extends: .defconfig } +freescale_imx8mnevk_defconfig: { extends: .defconfig } freescale_p1025twr_defconfig: { extends: .defconfig } freescale_t1040d4rdb_defconfig: { extends: .defconfig } freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
DEVELOPERS +4 -0
@@ -2397,6 +2397,10 @@ F: package/gtest/ F: package/libhttpserver/ F: package/mtdev/ +N: Stephane Viau <[email protected]> +F: board/freescale/imx8mnevk/ +F: configs/freescale_imx8mnevk_defconfig + N: Steve Calfee <[email protected]> F: package/python-pymysql/ F: package/python-pyratemp/
board/freescale/imx8mnevk/readme.txt new file +73 -0
73 lines not on this page · raw message
configs/freescale_imx8mnevk_defconfig new file +43 -0
43 lines not on this page · raw message
Signature · 1 line
2.7.4
v4 cover imx: add i.MX8M Nano EVK board support
In reply to Stephane ViauSt?phane, All,
On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:
Quoted 7 lines
This series adds support for the NXP i.MX8M Nano EVK board.
Since the i.MX8M Nano CPU was added for the Nitrogen8MNano board, which has a type of memory (LPDDR4) different from the NXP reference board (DDR4), the first half of the series introduce the DDR training selection for the whole i.MX8 M SoC family, as well as a separation of the DDR and HDMI FW copy.
Quoted 6 lines
The second half of the series adds support for i.MX8M Nano EVK Board with
kernel/U-Boot based on 4.19.35_1.1.0, which is the current preferred version for all NXP reference boards.Stephane Viau (5):
package/freescale-imx: Add option for DDR FW need
I'll reply separately to that one.
Quoted 5 lines
package/freescale-imx/firmware-imx: add choice for DDR training
binaries
board/freescale/common/imx: use generic ddr_fw.bin name board/freescale/common/imx: add support for i.MX8M Nano configs/freescale_imx8mnevk: new defconfig
Whole series applied to next, thanks.
Regards,
Yann E. MORIN.
Quoted 20 lines
.gitlab-ci.yml | 1 + DEVELOPERS | 4 ++ .../common/imx/imx8-bootloader-prepare.sh | 6 +- board/freescale/common/imx/post-image.sh | 2 + board/freescale/imx8mnevk/readme.txt | 73 ++++++++++++++++++++++ configs/freescale_imx8mnevk_defconfig | 43 +++++++++++++ package/freescale-imx/Config.in | 6 ++ package/freescale-imx/firmware-imx/Config.in | 24 +++++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 43 ++++++++++++- 9 files changed, 197 insertions(+), 5 deletions(-) create mode 100644 board/freescale/imx8mnevk/readme.txt create mode 100644 configs/freescale_imx8mnevk_defconfigSignature · 6 lines
2.7.4 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
v4 cover imx: add i.MX8M Nano EVK board support
Quoted 2 lines
St??phane, All,
Hello Yann,
Quoted 9 lines
On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:
Quoted 7 lines
This series adds support for the NXP i.MX8M Nano EVK board.
Since the i.MX8M Nano CPU was added for the Nitrogen8MNano board, which has a type of memory (LPDDR4) different from the NXP reference board (DDR4), the first half of the series introduce the DDR training selection for the whole i.MX8 M SoC family, as well as a separation of the DDR and HDMI FW copy.
Quoted 8 lines
Quoted 6 lines
The second half of the series adds support for i.MX8M Nano EVK Board with
kernel/U-Boot based on 4.19.35_1.1.0, which is the current preferred version for all NXP reference boards.Stephane Viau (5):
package/freescale-imx: Add option for DDR FW needI'll reply separately to that one.
Please check my comment in the same thread.
Quoted 8 lines
Quoted 6 lines
package/freescale-imx/firmware-imx: add choice for DDR training
binaries
board/freescale/common/imx: use generic ddr_fw.bin name board/freescale/common/imx: add support for i.MX8M Nano configs/freescale_imx8mnevk: new defconfigWhole series applied to next, thanks.
Thank you.
BR,
Stephane.
Quoted 33 lines
Regards,
Yann E. MORIN.Quoted 13 lines
.gitlab-ci.yml | 1 + DEVELOPERS | 4 ++ .../common/imx/imx8-bootloader-prepare.sh | 6 +- board/freescale/common/imx/post-image.sh | 2 + board/freescale/imx8mnevk/readme.txt | 73 ++++++++++++++++++++++ configs/freescale_imx8mnevk_defconfig | 43 +++++++++++++ package/freescale-imx/Config.in | 6 ++ package/freescale-imx/firmware-imx/Config.in | 24 +++++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 43 ++++++++++++- 9 files changed, 197 insertions(+), 5 deletions(-) create mode 100644 board/freescale/imx8mnevk/readme.txt create mode 100644 configs/freescale_imx8mnevk_defconfigQuoted 7 lines
--
2.7.4_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot--
.-----------------.--------------------.------------------.--------------------.| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |'------------------------------^-------^------------------^--------------------'