Skip to contentSkip to conversation

imx: add i.MX8M Nano EVK board support

PATCH Superseded Stephane Viau 3 participants 13 messages May 27, 2020 – Jun 3, 2020 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

v4 cover imx: add i.MX8M Nano EVK board support

This series adds support for the NXP i.MX8M Nano EVK board.

Since the i.MX8M Nano CPU was added for the Nitrogen8MNano board, which has a type of memory (LPDDR4) different from the NXP reference board (DDR4), the first half of the series introduce the DDR training selection for the whole i.MX8 M SoC family, as well as a separation of the DDR and HDMI FW copy.

The second half of the series adds support for i.MX8M Nano EVK Board with kernel/ U-Boot based on 4.19.35_1.1.0, which is the current preferred version for all NXP reference boards.

Stephane Viau (5):
package/freescale-imx: Add option for DDR FW need package/freescale-imx/firmware-imx: add choice for DDR training
binaries
board/freescale/common/imx: use generic ddr_fw.bin name board/freescale/common/imx: add support for i.MX8M Nano configs/freescale_imx8mnevk: new defconfig

 .gitlab-ci.yml                                     |  1 +
 DEVELOPERS                                         |  4 ++
 .../common/imx/imx8-bootloader-prepare.sh          |  6 +-
 board/freescale/common/imx/post-image.sh           |  2 +
 board/freescale/imx8mnevk/readme.txt               | 73 ++++++++++++++++++++++
 configs/freescale_imx8mnevk_defconfig              | 43 +++++++++++++
 package/freescale-imx/Config.in                    |  6 ++
 package/freescale-imx/firmware-imx/Config.in       | 24 +++++++
 package/freescale-imx/firmware-imx/firmware-imx.mk | 43 ++++++++++++-
 9 files changed, 197 insertions(+), 5 deletions(-)
 create mode 100644 board/freescale/imx8mnevk/readme.txt
 create mode 100644 configs/freescale_imx8mnevk_defconfig
Signature · 1 line
2.7.4
#1 lore raw

PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need

Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.

---
v4:
- add Gary's reviewed-by
v3:
- let the others 'select' this newly introduced option instead of 'default y' it. I believe this option is still required since we only want to choose a DDR binary for the i.MX 8M platforms. (Yann/Gary)
v2:
- introduce BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR firmware selection to the whole i.MX 8M family (suggested by Gary)

---
 package/freescale-imx/Config.in | 6 ++++++
 1 file changed, 6 insertions(+)
package/freescale-imx/Config.in +6 -0
index b0c7de8..0be37ce 100644
@@ -45,12 +45,15 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
 	bool "imx8m"
+	select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
 	bool "imx8mm"
+	select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN
 	bool "imx8mn"
+	select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 	bool "imx8x"
@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 
+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+	bool
+
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
Signature · 1 line
2.7.4
#2 lore raw

PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need

Stephane, All

On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:

Quoted 43 lines

Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.

---
v4:
- add Gary's reviewed-by
v3:
- let the others 'select' this newly introduced option instead of 'default y' it. I believe this option is still required since we only want to choose a DDR binary for the i.MX 8M platforms. (Yann/Gary)
v2:
- introduce BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR firmware selection to the whole i.MX 8M family (suggested by Gary)

---
 package/freescale-imx/Config.in | 6 ++++++
 1 file changed, 6 insertions(+)
package/freescale-imx/Config.in +3 -0
index b0c7de8..0be37ce 100644
@@ -45,12 +45,15 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
 	bool "imx8m"
+	select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
 	bool "imx8mm"
+	select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN
 	bool "imx8mn"
+	select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 	bool "imx8x"

package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103

Quoted 5 lines
package/freescale-imx/Config.in +2 -0
@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 
+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+	bool

Now that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.

Pelase review the commit to check I haven't totally borked the thing:

    https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6

Thanks.

Quoted 10 lines
package/freescale-imx/Config.in +0 -0
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
Signature · 6 lines
2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#3 lore raw

PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need

Quoted 2 lines

Stephane, All

Hello Yann,

Quoted 48 lines

On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:

Quoted 46 lines

Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.

---
v4:
- add Gary's reviewed-by
v3:
- let the others 'select' this newly introduced option instead of 'default y' it. I believe this option is still required since we only want to choose a DDR binary for the i.MX 8M platforms. (Yann/Gary)
v2:
- introduce BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR firmware selection to the whole i.MX 8M family (suggested by Gary)

---
 package/freescale-imx/Config.in | 6 ++++++
 1 file changed, 6 insertions(+)
package/freescale-imx/Config.in +3 -0
index b0c7de8..0be37ce 100644
@@ -45,12 +45,15 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
      bool "imx8m"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
      bool "imx8mm"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN
      bool "imx8mn"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
      bool "imx8x"
@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
              BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \
              BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 
Quoted 7 lines

package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103

Quoted 2 lines
package/freescale-imx/Config.in +2 -0
+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+     bool

Now that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.

Quite tempting, indeed.
I have actually proposed this in my v2 series, in which Gary made these comments:
[1]:
"
And here is why I'm worried the name of the previous variable might be misleading. You don't only copy the DDR FW training under that BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4 macro, you also copy the HDMI FW. Note that the DP FW should be added as well.
"
and [2]:

	"
	I would still keep the 'if IMX8M' around the whole block that is only
	for iMX8M.
	"

... which I did agree with and reverted back to using the whole SoC list instead.

Also, the _ifeq_ part of this _if_ statement mentions another SoC (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X): it makes thus more sense to use the i.MX 8M SoC list in the former part, doesn't it?

[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-May/283442.html

Thanks,
Stephane.

Quoted 25 lines

Pelase review the commit to check I haven't totally borked the thing:

   https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6

Thanks.

Quoted 10 lines
package/freescale-imx/Config.in +0 -1
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
--

2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

#4 lore raw

PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need

Stephane, All,

On 2020-06-02 07:32 +0000, Stephane Viau (OSS) spake thusly:

Quoted 3 lines
Quoted 3 lines

On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:

Quoted 2 lines

Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.

[--SNIP--]

Quoted 24 lines
Quoted 18 lines
Quoted 18 lines

config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
bool "imx8m"

package/freescale-imx/Config.in +3 -0
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
      bool "imx8mm"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN
      bool "imx8mn"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
      bool "imx8x"
@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
              BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \
              BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 
Quoted 6 lines

package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103

Quoted 2 lines
package/freescale-imx/Config.in +2 -0
+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+     bool

Now that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.

Quoted 8 lines

Quite tempting, indeed.
I have actually proposed this in my v2 series, in which Gary made these comments:
[1]:
"
And here is why I'm worried the name of the previous variable might be misleading. You don't only copy the DDR FW training under that BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4 macro, you also copy the HDMI FW. Note that the DP FW should be added as well.

The macro copying the HDMI FW can indeed be moved out of the conditional block, indeed. But this commit 6bb7f3b8109 I amended when applying does not change the behaviour at all.

Quoted 6 lines

and [2]:

	"
	I would still keep the 'if IMX8M' around the whole block that is only
	for iMX8M.
	"

... which I did agree with and reverted back to using the whole SoC list instead.

Ah, but that's not what I discussed with Gary on IRC the other day when he asked for my input. I suggested exactly to switch to using the new variable.

Quoted 3 lines

Also, the _ifeq_ part of this _if_ statement mentions another SoC (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X): it makes thus more sense to use the i.MX 8M SoC list in the former part, doesn't it?

Oh, I see what you mean. I also had a mixed feelings about it, but this is not so much an issue. Semantically, that is OK (IMHO) to have succeeding conditionals that test various things...

But looking at the big picture again, I see potential for a further simple (semantic) cleanup:

    diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
    index 9fd1c54b48..3239e432da 100644
    --- a/package/freescale-imx/firmware-imx/firmware-imx.mk
    +++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
    @@ -18,7 +18,16 @@ define FIRMWARE_IMX_EXTRACT_CMDS
     	$(call FREESCALE_IMX_EXTRACT_HELPER,$(FIRMWARE_IMX_DL_DIR)/$(FIRMWARE_IMX_SOURCE))
     endef
     
    +ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
    +FIRMWARE_IMX_INSTALL_IMAGES = YES
    +define FIRMWARE_IMX_PREPARE_HDMI_FW
    +	cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
    +		$(BINARIES_DIR)/signed_hdmi_imx8m.bin
    +endef
    +endif # PLATFORM_IMX8M
    +
     ifeq ($(BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW),y)
    +FIRMWARE_IMX_INSTALL_TARGET = NO
     FIRMWARE_IMX_INSTALL_IMAGES = YES
     
     ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4),y)
    @@ -46,6 +55,8 @@ define FIRMWARE_IMX_PREPARE_DDR_FW
     		$(BINARIES_DIR)/lpddr4_pmu_train_fw.bin
     	ln -sf $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin $(BINARIES_DIR)/ddr_fw.bin
     endef
    +
    +# else DRFW_LPDDR4
     else ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_DDR4),y)
     FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
     define FIRMWARE_IMX_PREPARE_DDR4_FW
    @@ -71,28 +82,19 @@ define FIRMWARE_IMX_PREPARE_DDR_FW
     		$(BINARIES_DIR)/ddr4_201810_fw.bin
     	ln -sf $(BINARIES_DIR)/ddr4_201810_fw.bin $(BINARIES_DIR)/ddr_fw.bin
     endef
    -endif
    +endif # DDRFW_LPDDR4 || DDRFW_DDR4
     
    -ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
    -define FIRMWARE_IMX_PREPARE_HDMI_FW
    -	cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
    -		$(BINARIES_DIR)/signed_hdmi_imx8m.bin
    -endef
    -endif
    -
    -define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
    -	$(FIRMWARE_IMX_PREPARE_DDR_FW)
    -	$(FIRMWARE_IMX_PREPARE_HDMI_FW)
    -endef
    +# else NEED_DDR_FW
     else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y)
    -define FIRMWARE_IMX_INSTALL_TARGET_CMDS
    +define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X
     	$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_dec.bin \
     		$(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_dec.bin
     	$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_enc.bin \
     		$(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_enc.bin
     endef
    -else
    -define FIRMWARE_IMX_INSTALL_TARGET_CMDS
    +
    +else # NEED_DDR_FW || PLATFORM_IMX8X
    +define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC
     	mkdir -p $(TARGET_DIR)/lib/firmware/imx
     	for blobdir in $(FIRMWARE_IMX_BLOBS); do \
     		cp -r $(@D)/firmware/$${blobdir} $(TARGET_DIR)/lib/firmware; \
    @@ -101,6 +103,16 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS
     	mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \
     		$(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw
     endef
    -endif
    +endif # NEED_DDR_FW || PLATFORM_IMX8X || the rest
    +
    +define FIRMWARE_IMX_INSTALL_TARGET_CMDS
    +	$(FIRMWARE_IMX_INSTALL_TARGET_CMDS_IM	X8X)
    +	$(FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC)
    +endef
    +
    +define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
    +	$(FIRMWARE_IMX_PREPARE_HDMI_FW)
    +	$(FIRMWARE_IMX_PREPARE_DDR_FW)
    +endef
     
     $(eval $(generic-package))

Care to look at that?

Regards,
Yann E. MORIN.

Quoted 31 lines

[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-May/283442.html

Thanks,
Stephane.

Quoted 25 lines

Pelase review the commit to check I haven't totally borked the thing:

   https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6

Thanks.

Quoted 10 lines
package/freescale-imx/Config.in +0 -1
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
--

2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#5 lore raw

PATCH v4 1/5 package/freescale-imx: Add option for DDR FW need

Quoted 1 line

Stephane, All,

Hi Yann,

Quoted 39 lines

On 2020-06-02 07:32 +0000, Stephane Viau (OSS) spake thusly:

Quoted 3 lines
Quoted 3 lines

On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:

Quoted 2 lines

Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.

[--SNIP--]

Quoted 24 lines
Quoted 18 lines
Quoted 18 lines

config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
bool "imx8m"

package/freescale-imx/Config.in +3 -0
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM
      bool "imx8mm"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN
      bool "imx8mn"
+     select BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
 
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
      bool "imx8x"
@@ -96,6 +99,9 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU
              BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \
              BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X
 
Quoted 6 lines

package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU · line 103

Quoted 2 lines
package/freescale-imx/Config.in +2 -0
+config BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+     bool

Now that this variable exists, I've made use of it to drive the actual insrallation of the DDR trainging files, instead of the concatenation of the corresponding platforms.

Quoted 8 lines

Quite tempting, indeed.
I have actually proposed this in my v2 series, in which Gary made these comments:
[1]:
"
And here is why I'm worried the name of the previous variable might be misleading. You don't only copy the DDR FW training under that BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4 macro, you also copy the HDMI FW. Note that the DP FW should be added as well.

Quoted 3 lines

The macro copying the HDMI FW can indeed be moved out of the conditional block, indeed. But this commit 6bb7f3b8109 I amended when applying does not change the behaviour at all.

Agreed ; the behavior is the same.

Quoted 12 lines
Quoted 7 lines

and [2]:

      "
      I would still keep the 'if IMX8M' around the whole block that is only
      for iMX8M.
      "

... which I did agree with and reverted back to using the whole SoC list instead.

Ah, but that's not what I discussed with Gary on IRC the other day when he asked for my input. I suggested exactly to switch to using the new variable.

Quoted 7 lines
Quoted 3 lines

Also, the _ifeq_ part of this _if_ statement mentions another SoC (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X): it makes thus more sense to use the i.MX 8M SoC list in the former part, doesn't it?

Oh, I see what you mean. I also had a mixed feelings about it, but this is not so much an issue. Semantically, that is OK (IMHO) to have succeeding conditionals that test various things...

It sure works semantically but (IMO), if there are ways to avoid it, I'd rather avoid comparing apples and oranges ;-)

Quoted 3 lines

But looking at the big picture again, I see potential for a further simple (semantic) cleanup:

True. I see these major steps:

1.1) define FIRMWARE_IMX_PREPARE_HDMI_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)
1.2) define FIRMWARE_IMX_PREPARE_DDR_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)
1.3) define FIRMWARE_IMX_INSTALL_IMAGES_CMDS (based on the above FIRMWARE_IMX_PREPARE_xxx)

2.1) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X (+ set FIRMWARE_IMX_INSTALL_TARGET = YES)
2.2) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC (+ set FIRMWARE_IMX_INSTALL_TARGET = YES)
2.3) define FIRMWARE_IMX_INSTALL_TARGET_CMDS (based on the above FIRMWARE_IMX_INSTALL_TARGET_CMDS_xxx)

Quoted 10 lines
   diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
   index 9fd1c54b48..3239e432da 100644
   --- a/package/freescale-imx/firmware-imx/firmware-imx.mk
   +++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
   @@ -18,7 +18,16 @@ define FIRMWARE_IMX_EXTRACT_CMDS
       $(call FREESCALE_IMX_EXTRACT_HELPER,$(FIRMWARE_IMX_DL_DIR)/$(FIRMWARE_IMX_SOURCE))
    endef

   +ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)

looks like we need a new "BR2_PACKAGE_FREESCALE_IMX_NEED_HDMI_FW" symbol here.

Quoted 6 lines

+FIRMWARE_IMX_INSTALL_IMAGES = YES
+define FIRMWARE_IMX_PREPARE_HDMI_FW
+ cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
+ $(BINARIES_DIR)/signed_hdmi_imx8m.bin
+endef
+endif # PLATFORM_IMX8M

That is "1.1) define FIRMWARE_IMX_PREPARE_HDMI_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)"

Quoted 19 lines
   +
    ifeq ($(BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW),y)
   +FIRMWARE_IMX_INSTALL_TARGET = NO
    FIRMWARE_IMX_INSTALL_IMAGES = YES
    ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4),y)
   @@ -46,6 +55,8 @@ define FIRMWARE_IMX_PREPARE_DDR_FW
               $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin
       ln -sf $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin $(BINARIES_DIR)/ddr_fw.bin
    endef
   +
   +# else DRFW_LPDDR4
    else ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_DDR4),y)
    FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
    define FIRMWARE_IMX_PREPARE_DDR4_FW
   @@ -71,28 +82,19 @@ define FIRMWARE_IMX_PREPARE_DDR_FW
               $(BINARIES_DIR)/ddr4_201810_fw.bin
       ln -sf $(BINARIES_DIR)/ddr4_201810_fw.bin $(BINARIES_DIR)/ddr_fw.bin
    endef
Quoted 2 lines

-endif
+endif # DDRFW_LPDDR4 || DDRFW_DDR4

That is "1.2) define FIRMWARE_IMX_PREPARE_DDR_FW (+ set FIRMWARE_IMX_INSTALL_IMAGES = YES)"

I would rather _endif_ here in order to separate the whole NEED_DDR_FW stuff from the INSTALL_TARGET stuff ; even though if, today, NEED_DDR_FW is tightly coupled with the i.MX8M family (but probably shouldn't).

Quoted 13 lines
   -ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
   -define FIRMWARE_IMX_PREPARE_HDMI_FW
   -   cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
   -           $(BINARIES_DIR)/signed_hdmi_imx8m.bin
   -endef
   -endif
   -
   -define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
   -   $(FIRMWARE_IMX_PREPARE_DDR_FW)
   -   $(FIRMWARE_IMX_PREPARE_HDMI_FW)
   -endef
   +# else NEED_DDR_FW
Quoted 8 lines
    else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y)
   -define FIRMWARE_IMX_INSTALL_TARGET_CMDS
   +define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X
       $(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_dec.bin \
               $(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_dec.bin
       $(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_enc.bin \
               $(TARGET_DIR)/lib/firmware/vpu/vpu_fw_imx8_enc.bin
    endef

That is "2.1) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X" (we should also set FIRMWARE_IMX_INSTALL_TARGET = YES)

Quoted 4 lines
   -else
   -define FIRMWARE_IMX_INSTALL_TARGET_CMDS
   +
   +else # NEED_DDR_FW || PLATFORM_IMX8X
Quoted 8 lines
   +define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC
       mkdir -p $(TARGET_DIR)/lib/firmware/imx
       for blobdir in $(FIRMWARE_IMX_BLOBS); do \
               cp -r $(@D)/firmware/$${blobdir} $(TARGET_DIR)/lib/firmware; \
   @@ -101,6 +103,16 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS
       mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \
               $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw
    endef

That is "2.2) define FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC" (we should also set FIRMWARE_IMX_INSTALL_TARGET = YES)

Quoted 7 lines

-endif
+endif # NEED_DDR_FW || PLATFORM_IMX8X || the rest +
+define FIRMWARE_IMX_INSTALL_TARGET_CMDS
+ $(FIRMWARE_IMX_INSTALL_TARGET_CMDS_IMX8X)
+ $(FIRMWARE_IMX_INSTALL_TARGET_CMDS_GENERIC)
+endef

Good idea, indeed.
That is "2.3) define FIRMWARE_IMX_INSTALL_TARGET_CMDS (based on the above FIRMWARE_IMX_INSTALL_TARGET_CMDS_xxx)"

Quoted 5 lines

+
+define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
+ $(FIRMWARE_IMX_PREPARE_HDMI_FW)
+ $(FIRMWARE_IMX_PREPARE_DDR_FW)
+endef

That is "1.3) define FIRMWARE_IMX_INSTALL_IMAGES_CMDS (based on the above FIRMWARE_IMX_PREPARE_xxx)"

Quoted 4 lines
    $(eval $(generic-package))

Care to look at that?

Will do (and propose a patch for review soon).

BR,
Stephane.

Quoted 45 lines

Regards,
Yann E. MORIN.

Quoted 31 lines

[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-May/283442.html

Thanks,
Stephane.

Quoted 25 lines

Pelase review the commit to check I haven't totally borked the thing:

   https://git.buildroot.org/buildroot/commit/?id=6bb7f3b81092e7005470c7d689a566dbc1d059c6

Thanks.

Quoted 10 lines
package/freescale-imx/Config.in +0 -1
 source "package/freescale-imx/imx-alsa-plugins/Config.in"
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
--

2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

--
.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

#6 lore raw

PATCH v4 2/5 package/freescale-imx/firmware-imx: add choice for DDR training binaries

In reply to Stephane Viau

Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4, etc.), for which the DDR training is performed in the bootloader. Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4 (e.g.: NXP's reference board EVK). This patch allows the selection of either of the binaries used to train the DDR.

Note that DDR and HDMI FW copies are now separated, which makes latter being properly copied only for the relevant SoC (i.MX8MQ).

---
v4:
- Keep the 'if IMX8M...' around the whole block (Gary)
- Remove FIRMWARE_IMX_PREPARE_HDMI_FW empty definition (Gary)
v3:
- Use common FIRMWARE_IMX_INSTALL_IMAGES_CMDS for all i.MX8M platforms and let FIRMWARE_IMX_PREPARE_{DDR,HDMI}_FW be different according to the type of DDR mounted (BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW choice)
or the eventual presence of HDMI, which is SoC dependant. (Gary)
v2:
- use BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR firmware selection for 8M, 8MM and 8MN (suggested by Gary)

fixup! package/freescale-imx/firmware-imx: add choice for DDR training binaries

---
 package/freescale-imx/firmware-imx/Config.in       | 24 ++++++++++++
 package/freescale-imx/firmware-imx/firmware-imx.mk | 43 +++++++++++++++++++++-
 2 files changed, 65 insertions(+), 2 deletions(-)
package/freescale-imx/firmware-imx/Config.in +24 -0
index 56d5b80..4962992 100644
@@ -8,3 +8,27 @@ config BR2_PACKAGE_FIRMWARE_IMX
 
 	  This library is provided by Freescale as-is and doesn't have
 	  an upstream.
+
+if BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+
+choice
+	bool "DDR training binaries"
+	default BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4
+	help
+	  Choose the DDR training binaries to be used depending on the
+	  kind of memory that is available on the target board (DDR4,
+	  LPDDR4, etc...).
+
+config BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4
+	bool "lpddr4"
+	help
+	  Use LPDDR4 binaries (i.e.: lpddr4_pmu_train_*.bin)
+
+config BR2_PACKAGE_FIRMWARE_DDRFW_DDR4
+	bool "DDR4"
+	help
+	  Use DDR4 binaries (i.e.: ddr4_*_201810.bin).
+
+endchoice # DDR training FW
+
+endif
package/freescale-imx/firmware-imx/firmware-imx.mk +41 -2

64 lines not on this page · raw message

Signature · 1 line
2.7.4
#7 lore raw

PATCH v4 2/5 package/freescale-imx/firmware-imx: add choice for DDR training binaries

Hi Stephane,

Thanks for the quick respin!

Quoted 6 lines · Stephane Viau

Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4, etc.), for which the DDR training is performed in the bootloader. Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4 (e.g.: NXP's reference board EVK). This patch allows the selection of either of the binaries used to train the DDR.

Quoted 7 lines

Note that DDR and HDMI FW copies are now separated, which makes latter being properly copied only for the relevant SoC (i.MX8MQ).

Regards,
Gary

#8 lore raw

PATCH v4 3/5 board/freescale/common/imx: use generic ddr_fw.bin name

In reply to Stephane Viau

For some SoCs (i.e.: i.MX8M Nano for now), the DDR training firmware in the boot image depends on the type of memory installed on a board (LPDDR4, DDR4, etc...). The previous patch makes this firmware name agnostic of the DDR type and uses ddr_fw.bin as a generic name. This patch makes imx8-bootloader-prepare.sh use this generic name, independently of the kind board DDR type.

---
v4:
- add Gary's reviewed-by
v2:
- generic ddr_fw.bin name is now used also for 8M and 8MM, along with 8MN (suggested by Gary)

---
 board/freescale/common/imx/imx8-bootloader-prepare.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
board/freescale/common/imx/imx8-bootloader-prepare.sh +3 -3
index abf2e43..cb7c37b 100755
@@ -9,21 +9,21 @@ main ()
 	fi
 
 	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
 		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
 
 		${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
 		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
 
 		${HOST_DIR}/bin/mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
 		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00960000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
Signature · 1 line
2.7.4
#9 lore raw

PATCH v4 4/5 board/freescale/common/imx: add support for i.MX8M Nano

In reply to Stephane Viau
---
 board/freescale/common/imx/post-image.sh | 2 ++
 1 file changed, 2 insertions(+)
board/freescale/common/imx/post-image.sh +2 -0
index 138ea7b..06ccaac 100755
@@ -38,6 +38,8 @@ genimage_type()
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
+		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then
Signature · 1 line
2.7.4
#10 lore raw

PATCH v4 5/5 configs/freescale_imx8mnevk: new defconfig

In reply to Stephane Viau

This patch adds support for the i.MX8M Nano EVK Board [1].

The final boot image is created from uboot and firmware binaries in post image script board/freescale/common/imx/imx8-bootloader-prepare.sh

Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel configuration needs host-openssl to build.

[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK

---
v3:
- Remove hdmi bin from 8MN config now that this feature can easily be (re)set through FIRMWARE_IMX_PREPARE_HDMI_FW.
v2:
- reword commit title about uboot.imx generation: sentence removed (Gary)
- replace link which was confusing because mentioning LPD4 when DDR4 EVK is actually available (suggested by Gary)

---
 .gitlab-ci.yml                        |  1 +
 DEVELOPERS                            |  4 ++
 board/freescale/imx8mnevk/readme.txt  | 73 +++++++++++++++++++++++++++++++++++
 configs/freescale_imx8mnevk_defconfig | 43 +++++++++++++++++++++
 4 files changed, 121 insertions(+)
 create mode 100644 board/freescale/imx8mnevk/readme.txt
 create mode 100644 configs/freescale_imx8mnevk_defconfig
.gitlab-ci.yml +1 -0
index fa8e077..0bf8a73 100644
@@ -190,6 +190,7 @@ freescale_imx8mmevk_defconfig: { extends: .defconfig }
 freescale_imx8mqevk_defconfig: { extends: .defconfig }
 freescale_imx8qmmek_defconfig: { extends: .defconfig }
 freescale_imx8qxpmek_defconfig: { extends: .defconfig }
+freescale_imx8mnevk_defconfig: { extends: .defconfig }
 freescale_p1025twr_defconfig: { extends: .defconfig }
 freescale_t1040d4rdb_defconfig: { extends: .defconfig }
 freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
DEVELOPERS +4 -0
index 99f47c3..27db106 100644
@@ -2397,6 +2397,10 @@ F:	package/gtest/
 F:	package/libhttpserver/
 F:	package/mtdev/
 
+N:	Stephane Viau <[email protected]>
+F:	board/freescale/imx8mnevk/
+F:	configs/freescale_imx8mnevk_defconfig
+
 N:	Steve Calfee <[email protected]>
 F:	package/python-pymysql/
 F:	package/python-pyratemp/
board/freescale/imx8mnevk/readme.txt new file +73 -0

73 lines not on this page · raw message

configs/freescale_imx8mnevk_defconfig new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
2.7.4
#11 lore raw

v4 cover imx: add i.MX8M Nano EVK board support

In reply to Stephane Viau

St?phane, All,

On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:

Quoted 7 lines

This series adds support for the NXP i.MX8M Nano EVK board.

Since the i.MX8M Nano CPU was added for the Nitrogen8MNano board, which has a type of memory (LPDDR4) different from the NXP reference board (DDR4), the first half of the series introduce the DDR training selection for the whole i.MX8 M SoC family, as well as a separation of the DDR and HDMI FW copy.

Quoted 6 lines

The second half of the series adds support for i.MX8M Nano EVK Board with kernel/ U-Boot based on 4.19.35_1.1.0, which is the current preferred version for all NXP reference boards.

Stephane Viau (5):
package/freescale-imx: Add option for DDR FW need

I'll reply separately to that one.

Quoted 5 lines

package/freescale-imx/firmware-imx: add choice for DDR training
binaries
board/freescale/common/imx: use generic ddr_fw.bin name board/freescale/common/imx: add support for i.MX8M Nano configs/freescale_imx8mnevk: new defconfig

Whole series applied to next, thanks.

Regards,
Yann E. MORIN.

Quoted 20 lines
 .gitlab-ci.yml                                     |  1 +
 DEVELOPERS                                         |  4 ++
 .../common/imx/imx8-bootloader-prepare.sh          |  6 +-
 board/freescale/common/imx/post-image.sh           |  2 +
 board/freescale/imx8mnevk/readme.txt               | 73 ++++++++++++++++++++++
 configs/freescale_imx8mnevk_defconfig              | 43 +++++++++++++
 package/freescale-imx/Config.in                    |  6 ++
 package/freescale-imx/firmware-imx/Config.in       | 24 +++++++
 package/freescale-imx/firmware-imx/firmware-imx.mk | 43 ++++++++++++-
 9 files changed, 197 insertions(+), 5 deletions(-)
 create mode 100644 board/freescale/imx8mnevk/readme.txt
 create mode 100644 configs/freescale_imx8mnevk_defconfig
Signature · 6 lines
2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#12 lore raw

v4 cover imx: add i.MX8M Nano EVK board support

Quoted 2 lines

St??phane, All,

Hello Yann,

Quoted 9 lines

On 2020-05-27 07:07 +0200, Stephane Viau spake thusly:

Quoted 7 lines

This series adds support for the NXP i.MX8M Nano EVK board.

Since the i.MX8M Nano CPU was added for the Nitrogen8MNano board, which has a type of memory (LPDDR4) different from the NXP reference board (DDR4), the first half of the series introduce the DDR training selection for the whole i.MX8 M SoC family, as well as a separation of the DDR and HDMI FW copy.

Quoted 8 lines
Quoted 6 lines

The second half of the series adds support for i.MX8M Nano EVK Board with kernel/ U-Boot based on 4.19.35_1.1.0, which is the current preferred version for all NXP reference boards.

Stephane Viau (5):
package/freescale-imx: Add option for DDR FW need

I'll reply separately to that one.

Please check my comment in the same thread.

Quoted 8 lines
Quoted 6 lines

package/freescale-imx/firmware-imx: add choice for DDR training
binaries
board/freescale/common/imx: use generic ddr_fw.bin name board/freescale/common/imx: add support for i.MX8M Nano configs/freescale_imx8mnevk: new defconfig

Whole series applied to next, thanks.

Thank you.

BR,
Stephane.

Quoted 33 lines

Regards,
Yann E. MORIN.

Quoted 13 lines
 .gitlab-ci.yml                                     |  1 +
 DEVELOPERS                                         |  4 ++
 .../common/imx/imx8-bootloader-prepare.sh          |  6 +-
 board/freescale/common/imx/post-image.sh           |  2 +
 board/freescale/imx8mnevk/readme.txt               | 73 ++++++++++++++++++++++
 configs/freescale_imx8mnevk_defconfig              | 43 +++++++++++++
 package/freescale-imx/Config.in                    |  6 ++
 package/freescale-imx/firmware-imx/Config.in       | 24 +++++++
 package/freescale-imx/firmware-imx/firmware-imx.mk | 43 ++++++++++++-
 9 files changed, 197 insertions(+), 5 deletions(-)
 create mode 100644 board/freescale/imx8mnevk/readme.txt
 create mode 100644 configs/freescale_imx8mnevk_defconfig
Quoted 7 lines

--
2.7.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'