Skip to contentSkip to conversation

power_supply: Add additional health properties to the header

PATCH New Dan Murphy 1 participant 4 messages May 27, 2020

Subsystems (2)
lore
Share & tools
lore

Dan Murphy

author
#0 lore raw

PATCH 1/4 power_supply: Add additional health properties to the header

Add HEALTH_WARM, HEALTH_COOL and HEALTH_HOT to the health enum.

HEALTH_WARM, HEALTH_COOL, and HEALTH_HOT properties are taken from the JEITA spec.

---
 Documentation/ABI/testing/sysfs-class-power | 2 +-
 drivers/power/supply/power_supply_sysfs.c   | 2 +-
 include/linux/power_supply.h                | 3 +++
 3 files changed, 5 insertions(+), 2 deletions(-)
Documentation/ABI/testing/sysfs-class-power +1 -1
index bf3b48f022dc..9f3fd01a9373 100644
@@ -190,7 +190,7 @@ Description:
 		Valid values: "Unknown", "Good", "Overheat", "Dead",
 			      "Over voltage", "Unspecified failure", "Cold",
 			      "Watchdog timer expire", "Safety timer expire",
-			      "Over current"
+			      "Over current", "Warm", "Cool", "Hot"
 
 What:		/sys/class/power_supply/<supply_name>/precharge_current
 Date:		June 2017
drivers/power/supply/power_supply_sysfs.c +1 -1
index f37ad4eae60b..d0d549611794 100644
@@ -61,7 +61,7 @@ static const char * const power_supply_charge_type_text[] = {
 static const char * const power_supply_health_text[] = {
 	"Unknown", "Good", "Overheat", "Dead", "Over voltage",
 	"Unspecified failure", "Cold", "Watchdog timer expire",
-	"Safety timer expire", "Over current"
+	"Safety timer expire", "Over current", "Warm", "Cool", "Hot"
 };
 
 static const char * const power_supply_technology_text[] = {
include/linux/power_supply.h +3 -0
index dcd5a71e6c67..8670e90c1d51 100644
@@ -61,6 +61,9 @@ enum {
 	POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE,
 	POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE,
 	POWER_SUPPLY_HEALTH_OVERCURRENT,
+	POWER_SUPPLY_HEALTH_WARM,
+	POWER_SUPPLY_HEALTH_COOL,
+	POWER_SUPPLY_HEALTH_HOT,
 };
 
 enum {
Signature · 1 line
2.26.2
author
#1 lore raw

PATCH 2/4 dt-bindings: power: Convert battery.txt to battery.yaml

Convert the battery.txt file to yaml and fix up the examples.

---
 .../bindings/power/supply/battery.txt         |  82 +---------
 .../bindings/power/supply/battery.yaml        | 143 ++++++++++++++++++
 2 files changed, 144 insertions(+), 81 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/supply/battery.yaml
Documentation/devicetree/bindings/power/supply/battery.txt +1 -81
index 3049cf88bdcf..b9a81621ce59 100644
@@ -1,81 +1 @@
-Battery Characteristics
-
-The devicetree battery node provides static battery characteristics.
-In smart batteries, these are typically stored in non-volatile memory
-on a fuel gauge chip. The battery node should be used where there is
-no appropriate non-volatile memory, or it is unprogrammed/incorrect.
-
-Upstream dts files should not include battery nodes, unless the battery
-represented cannot easily be replaced in the system by one of a
-different type. This prevents unpredictable, potentially harmful,
-behavior should a replacement that changes the battery type occur
-without a corresponding update to the dtb.
-
-Required Properties:
- - compatible: Must be "simple-battery"
-
-Optional Properties:
- - voltage-min-design-microvolt: drained battery voltage
- - voltage-max-design-microvolt: fully charged battery voltage
- - energy-full-design-microwatt-hours: battery design energy
- - charge-full-design-microamp-hours: battery design capacity
- - precharge-current-microamp: current for pre-charge phase
- - charge-term-current-microamp: current for charge termination phase
- - constant-charge-current-max-microamp: maximum constant input current
- - constant-charge-voltage-max-microvolt: maximum constant input voltage
- - factory-internal-resistance-micro-ohms: battery factory internal resistance
- - ocv-capacity-table-0: An array providing the open circuit voltage (OCV)
-   of the battery and corresponding battery capacity percent, which is used
-   to look up battery capacity according to current OCV value. And the open
-   circuit voltage unit is microvolt.
- - ocv-capacity-table-1: Same as ocv-capacity-table-0
- ......
- - ocv-capacity-table-n: Same as ocv-capacity-table-0
- - ocv-capacity-celsius: An array containing the temperature in degree Celsius,
-   for each of the battery capacity lookup table. The first temperature value
-   specifies the OCV table 0, and the second temperature value specifies the
-   OCV table 1, and so on.
- - resistance-temp-table: An array providing the temperature in degree Celsius
-   and corresponding battery internal resistance percent, which is used to look
-   up the resistance percent according to current temperature to get a accurate
-   batterty internal resistance in different temperatures.
-
-Battery properties are named, where possible, for the corresponding
-elements in enum power_supply_property, defined in
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h
-
-Batteries must be referenced by chargers and/or fuel-gauges
-using a phandle. The phandle's property should be named
-"monitored-battery".
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3200000>;
-		voltage-max-design-microvolt = <4200000>;
-		energy-full-design-microwatt-hours = <5290000>;
-		charge-full-design-microamp-hours = <1430000>;
-		precharge-current-microamp = <256000>;
-		charge-term-current-microamp = <128000>;
-		constant-charge-current-max-microamp = <900000>;
-		constant-charge-voltage-max-microvolt = <4200000>;
-		factory-internal-resistance-micro-ohms = <250000>;
-		ocv-capacity-celsius = <(-10) 0 10>;
-		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
-		ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
-		ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
-		resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
-	};
-
-	charger: charger@11 {
-		....
-		monitored-battery = <&bat>;
-		...
-	};
-
-	fuel_gauge: fuel-gauge@22 {
-		....
-		monitored-battery = <&bat>;
-		...
-	};
+The contents of this file has been moved to battery.yaml
Documentation/devicetree/bindings/power/supply/battery.yaml new file +143 -0

143 lines not on this page · raw message

Signature · 1 line
2.26.2
author
#2 lore raw

PATCH 3/4 dt-bindings: power: Add the bindings for the bq2515x family of chargers.

In reply to Dan Murphy

From: Ricardo Rivera-Matos <[email protected]>

The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller.

Datasheets:
http://www.ti.com/lit/ds/symlink/bq25150.pdf
http://www.ti.com/lit/ds/symlink/bq25155.pdf

---
 .../bindings/power/supply/bq2515x.yaml        | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml
Documentation/devicetree/bindings/power/supply/bq2515x.yaml new file +110 -0
new file mode 100644
index 000000000000..85bd6d57c5ab
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+  - Dan Murphy <[email protected]>
+  - Ricardo Rivera-Matos <[email protected]>
+
+description: |
+  The BQ2515x family is a highly integrated battery charge management IC that
+  integrates the most common functions for wearable devices, namely a charger,
+  an output voltage rail, ADC for battery and system monitoring, and
+  push-button controller.
+
+  Specifications about the charger can be found at:
+    http://www.ti.com/lit/ds/symlink/bq25150.pdf
+    http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25150
+      - ti,bq25155
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  ac-detect-gpios:
+    description: |
+       GPIO used for connecting the bq2515x device PG (AC Detect)
+       pin.  This pin should be used if possible as this is the
+       recommended way to obtain the charger's input PG state.
+       If this pin is not specified a software-based approach for PG
+       detection is used.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+  low-power-gpios:
+    description: GPIO used for low power mode of IC.
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  constant-charge-current-max-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum charging current in micro Amps.
+    minimum: 50000
+    maximum: 600000
+
+  precharge-current-max-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum precharging current in micro Amps.
+    minimum: 1250
+    maximum: 77500
+
+  input-current-limit-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum input current in micro Amps.
+    minimum: 50000
+    maximum: 500000
+
+  constant-charge-voltage-max-microvolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum charging voltage in micro volts.
+    minimum: 3600000
+    maximum: 4600000
+
+  monitored-battery:
+    $ref: battery.yaml#
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <50000>;
+      precharge-current-microamp = <2500>;
+      constant-charge-voltage-max-microvolt = <4000000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25150: charger@6b {
+        compatible = "ti,bq25150";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+        input-current-limit-microamp = <100000>;
+
+        ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+        low-power-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+        charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+      };
+    };
Signature · 1 line
2.26.2
author
#3 lore raw

PATCH 4/4 power: supply: bq25150 introduce the bq25150

In reply to Dan Murphy

From: Ricardo Rivera-Matos <[email protected]>

Introduce the bq2515x family of chargers.

The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller.

Datasheets:

	bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
	bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf
---
 drivers/power/supply/Kconfig           |   13 +
 drivers/power/supply/Makefile          |    1 +
 drivers/power/supply/bq2515x_charger.c | 1159 ++++++++++++++++++++++++
 3 files changed, 1173 insertions(+)
 create mode 100644 drivers/power/supply/bq2515x_charger.c
drivers/power/supply/Kconfig +13 -0
index f3424fdce341..266193301e2d 100644
@@ -589,6 +589,19 @@ config CHARGER_BQ24735
 	help
 	  Say Y to enable support for the TI BQ24735 battery charger.
 
+config CHARGER_BQ2515X
+	tristate "TI BQ2515X battery charger family"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ2515X family of battery
+	  charging integrated circuits. The BQ2515X are highly integrated
+	  battery charge management ICs that integrate the most common
+	  functions for wearable devices, namely a charger, an output voltage
+	  rail, ADC for battery and system monitoring, and push-button
+	  controller.
+
 config CHARGER_BQ25890
 	tristate "TI BQ25890 battery charger driver"
 	depends on I2C
drivers/power/supply/Makefile +1 -0
index 6c7da920ea83..8fcc175a7e22 100644
@@ -80,6 +80,7 @@ obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
 obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
 obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
 obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
drivers/power/supply/bq2515x_charger.c new file +1159 -0

1,159 lines not on this page · raw message

Signature · 1 line
2.26.2