Skip to contentSkip to conversation

board: tbs2910: disable loadb and loads commands

PATCH New Denis 'GNUtoo' Carikli 4 participants 22 messages May 30, 2020 – Jun 12, 2020

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/7 board: tbs2910: disable loadb and loads commands

The loadb and loads commands are not needed for booting.

There are also more reliable and faster alternatives to loadb and loads that can be used with the current configuration.

As that the resulting image is already very close to the size limit, removing the loadb and loads commands shouldn't hurt.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction:
- text: 6733 bytes
- data: 116 bytes
- bss: 1172 bytes
- total: 8021 bytes

---
Changelog since v4:
-------------------
- Fixed Acked-by location in the commit message as requested by Soeren Moch.

---
 configs/tbs2910_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/tbs2910_defconfig +2 -0
index 2ff0e160f7..2623eb73cd 100644
@@ -28,6 +28,8 @@ CONFIG_SYS_MEMTEST_START=0x10000000
 CONFIG_SYS_MEMTEST_END=0x2f400000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_PCI=y
Signature · 1 line
2.26.2
#1 lore raw

PATCH v5 2/7 board: tbs2910: disable CONFIG_GZIP

As that the resulting image is already very close to the size limit, and that CONFIG_GZIP is not strictly required, removing it shouldn't hurt.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction:
- text: 9752
- data: 0
- bss: 16
- total: 9768

---
Changelog since v4:
-------------------
- Added the following tag:

---
 configs/tbs2910_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/tbs2910_defconfig +1 -0
index 2623eb73cd..cc459e6de6 100644
@@ -88,5 +88,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_I2C_EDID=y
 CONFIG_VIDEO_IPUV3=y
 CONFIG_VIDEO=y
+# CONFIG_GZIP is not set
 CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
 # CONFIG_EFI_LOADER is not set
Signature · 1 line
2.26.2
#2 lore raw

PATCH v5 2/7 board: tbs2910: disable CONFIG_GZIP

Quoted 12 lines · Denis 'GNUtoo' Carikli

As that the resulting image is already very close to the size limit, and that CONFIG_GZIP is not strictly required, removing it shouldn't hurt.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction:
- text: 9752
- data: 0
- bss: 16
- total: 9768

Quoted 2 lines

Applied to u-boot/next, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200612/c2fcc7a0/attachment.sig>
#3 lore raw

PATCH v5 3/7 board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig

In reply to Denis 'GNUtoo' Carikli

This doesn't affect the size of the image: with arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, the text, data, bss and total sizes remain unchanged.

---
Changelog since v4:
-------------------
- Added the following tag:

---
 configs/tbs2910_defconfig | 2 ++
 include/configs/tbs2910.h | 8 --------
 2 files changed, 2 insertions(+), 8 deletions(-)
configs/tbs2910_defconfig +2 -0
index cc459e6de6..d14ff45615 100644
@@ -10,6 +10,8 @@ CONFIG_PRE_CON_BUF_ADDR=0x7c000000
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
 CONFIG_PRE_CONSOLE_BUFFER=y
include/configs/tbs2910.h +0 -8
index 7376b91f55..a230111251 100644
@@ -100,12 +100,4 @@
 	"stdin=serial,usbkbd\0" \
 	"stdout=serial,vga\0"
 
-#define CONFIG_BOOTCOMMAND \
-	"mmc rescan; " \
-	"if run bootcmd_up1; then " \
-		"run bootcmd_up2; " \
-	"else " \
-		"run bootcmd_mmc; " \
-	"fi"
-
 #endif			       /* __TBS2910_CONFIG_H * */
Signature · 1 line
2.26.2
#4 lore raw

PATCH v5 3/7 board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig

Quoted 7 lines · Denis 'GNUtoo' Carikli

This doesn't affect the size of the image: with arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, the text, data, bss and total sizes remain unchanged.

Applied to u-boot/next, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200612/c97a5c22/attachment.sig>
#5 lore raw

PATCH v5 4/7 board: tbs2910_defconfig: Add support for booting general purpose distributions

In reply to Denis 'GNUtoo' Carikli

This is needed to enable distro_boot support later on.

Adding the necessary configuration to enable booting general purpose distributions is typically done by enabling CONFIG_DISTRO_DEFAULTS.

However the resulting image size is is already very close to the size limit and PXE isn't strictly needed, so instead we made sure that all the configuration selected by CONFIG_DISTRO_DEFAULTS were selected, with the exception of PXE related configuration (CONFIG_BOOTP_PXE and CONFIG_CMD_PXE) that are both disabled.

With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: +7526 bytes
- data: +28 bytes
- bss: -12 bytes
- total: +7542 bytes

---
Changelog since v4:
-------------------
- As requested, I Added in the commit message the reason why the change is really needed as the short summary is not self explanatory enough.
- Fixed a typo in the commit message
(resultimg image instead of resulting image).
- Switched to the use of CONFIG_CMD_SYSBOOT instead of CONFIG_DISTRO_BOOTCMD as suggested
The only changes between the two resulting .config are the following:
-CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_DISTRO_DEFAULTS is not set
-CONFIG_BOOTP_PXE=y
-CONFIG_BOOTP_PXE_CLIENTARCH=0x15
-CONFIG_CMD_PXE=y
+# CONFIG_CMD_PXE is not set

---
 configs/tbs2910_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/tbs2910_defconfig +2 -0
index d14ff45615..fc9095c859 100644
@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_PRE_CON_BUF_ADDR=0x7c000000
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
@@ -43,6 +44,7 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_SYSBOOT=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
Signature · 1 line
2.26.2
#6 lore raw

PATCH v5 4/7 board: tbs2910_defconfig: Add support for booting general purpose distributions

Quoted 21 lines · Denis 'GNUtoo' Carikli

This is needed to enable distro_boot support later on.

Adding the necessary configuration to enable booting general purpose distributions is typically done by enabling CONFIG_DISTRO_DEFAULTS.

However the resulting image size is is already very close to the size limit and PXE isn't strictly needed, so instead we made sure that all the configuration selected by CONFIG_DISTRO_DEFAULTS were selected, with the exception of PXE related configuration (CONFIG_BOOTP_PXE and CONFIG_CMD_PXE) that are both disabled.

With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: +7526 bytes
- data: +28 bytes
- bss: -12 bytes
- total: +7542 bytes

Quoted 1 line

It is quite uncommon to use "board: tbs2910_defconfig" instead of "board: tbs2910" in the patch title.But maybe not that important.

Thanks,
Soeren

Quoted 41 lines

---
Changelog since v4:
-------------------
- As requested, I Added in the commit message the reason why the change is really needed as the short summary is not self explanatory enough.
- Fixed a typo in the commit message
(resultimg image instead of resulting image).
- Switched to the use of CONFIG_CMD_SYSBOOT instead of CONFIG_DISTRO_BOOTCMD as suggested
The only changes between the two resulting .config are the following:
-CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_DISTRO_DEFAULTS is not set
-CONFIG_BOOTP_PXE=y
-CONFIG_BOOTP_PXE_CLIENTARCH=0x15
-CONFIG_CMD_PXE=y
+# CONFIG_CMD_PXE is not set

---
 configs/tbs2910_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/tbs2910_defconfig +2 -0
index d14ff45615..fc9095c859 100644
@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_PRE_CON_BUF_ADDR=0x7c000000
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
@@ -43,6 +44,7 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_SYSBOOT=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
#7 lore raw

PATCH v5 4/7 board: tbs2910_defconfig: Add support for booting general purpose distributions

On Sat, 30 May 2020 19:17:49 +0200
Soeren Moch <[email protected]> wrote:

Since I need to fix the MAINTAINER file to add the documentation path in it anyway, it's probably better to resend again a v6 serie.

As I plan to resend a serie anyway, would the following work better:

Quoted 2 lines

board: tbs2910: Add support for booting general purpose distributions in defconfig

Denis.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200604/d8f7f9ee/attachment.sig>

#8 lore raw

PATCH v5 4/7 board: tbs2910_defconfig: Add support for booting general purpose distributions

Quoted 10 lines · Denis 'GNUtoo' Carikli

On Sat, 30 May 2020 19:17:49 +0200
Soeren Moch <[email protected]> wrote:

Since I need to fix the MAINTAINER file to add the documentation path in it anyway, it's probably better to resend again a v6 serie.

As I plan to resend a serie anyway, would the following work better:

Quoted 2 lines

board: tbs2910: Add support for booting general purpose distributions in defconfig

It is good style to limit the patch title length to 75 characters. So I would prefer just "board: tbs2910: Add support for booting general purpose distributions".

Soeren

#9 lore raw

PATCH v5 4/7 board: tbs2910_defconfig: Add support for booting general purpose distributions

In reply to Denis 'GNUtoo' Carikli
Quoted 21 lines · Denis 'GNUtoo' Carikli

This is needed to enable distro_boot support later on.

Adding the necessary configuration to enable booting general purpose distributions is typically done by enabling CONFIG_DISTRO_DEFAULTS.

However the resulting image size is is already very close to the size limit and PXE isn't strictly needed, so instead we made sure that all the configuration selected by CONFIG_DISTRO_DEFAULTS were selected, with the exception of PXE related configuration (CONFIG_BOOTP_PXE and CONFIG_CMD_PXE) that are both disabled.

With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: +7526 bytes
- data: +28 bytes
- bss: -12 bytes
- total: +7542 bytes

Quoted 2 lines

Applied to u-boot/next, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200612/28fb3d8c/attachment.sig>
#10 lore raw

PATCH v5 5/7 board: tbs2910: remove CONFIG_DHCP

In reply to Denis 'GNUtoo' Carikli

As that the resulting image is already very close to the size limit, and that CONFIG_DHCP is not strictly required, removing it shouldn't hurt.

With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: -1708 bytes
- data: -28 bytes
- bss: -20 bytes
- total: -1756 bytes

---
Changelog since v4:
-------------------
- I was requested to remove DHCP in the v3 review but I forgot about it in v4. This fixes it.

---
 configs/tbs2910_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/tbs2910_defconfig +0 -1
index fc9095c859..9b25dcff5e 100644
@@ -39,7 +39,6 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
Signature · 1 line
2.26.2
#11 lore raw

PATCH v5 5/7 board: tbs2910: remove CONFIG_DHCP

Quoted 3 lines · Denis 'GNUtoo' Carikli

As that the resulting image is already very close to the size limit, and that CONFIG_DHCP is not strictly required, removing it shouldn't hurt.

You removed CONFIG_CMD_DHCP.? This is used to check the ethernet connection of the board. And since we enable NFS boot in defconfig, we also want DHCP.
Please keep this command and drop this patch.

Quoted 9 lines

With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: -1708 bytes
- data: -28 bytes
- bss: -20 bytes
- total: -1756 bytes

Quoted 6 lines

---
Changelog since v4:
-------------------
- I was requested to remove DHCP in the v3 review but I forgot about it in v4. This fixes it.

I asked to "remove DHCP and PXE boot targets" in BOOT_TARGET_DEVICES for distroboot. This already was correctly done in v4 of this series.

Please drop this patch.

Thanks,
Soeren

Quoted 16 lines
---
 configs/tbs2910_defconfig | 1 -
 1 file changed, 1 deletion(-)
configs/tbs2910_defconfig +0 -1
index fc9095c859..9b25dcff5e 100644
@@ -39,7 +39,6 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
#12 lore raw

PATCH v5 6/7 board: tbs2910: Enable distro_boot support.

In reply to Denis 'GNUtoo' Carikli

This keeps the compatibility with the old bootcmd.

The fdtfile environment variable also needed to be set to imx6q-tbs2910.dtb to enable booting mainline kernels otherwise with extlinux.conf it tries to load mx6-tbs2910.dtb instead.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: +2041 bytes
- data: 0 bytes
- bss: 0 bytes
- total: +2041 bytes

---
Changelog since v4:
-------------------
- Sorted EXTRA_ENV_SETTINGS alphabetically as requested BOOTENV was also moved at the begining of EXTRA_ENV_SETTINGS like on include/configs/colibri-imx8x.h
- Moved BOOT_TARGET_DEVICES at the end of the file as suggested

---
 configs/tbs2910_defconfig |  3 ++-
 include/configs/tbs2910.h | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)
configs/tbs2910_defconfig +2 -1
index 9b25dcff5e..df5013e87c 100644
@@ -12,11 +12,12 @@ CONFIG_AHCI=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
+CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc || run distro_bootcmd; fi"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
 CONFIG_PRE_CONSOLE_BUFFER=y
 CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
include/configs/tbs2910.h +18 -0
index a230111251..17de122852 100644
@@ -76,6 +76,7 @@
 #define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	BOOTENV \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M at 60 " \
 			"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
@@ -92,6 +93,13 @@
 			"bootm 0x10800000 0x10d00000\0" \
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
+	"fdt_addr=0x13000000\0" \
+	"fdt_addr_r=0x13000000\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"kernel_addr_r=0x10008000\0" \
+	"pxefile_addr_r=0x10008000\0" \
+	"ramdisk_addr_r=0x18000000\0" \
+	"scriptaddr=0x14000000\0" \
 	"set_con_serial=setenv stdout serial; " \
 			"setenv stderr serial\0" \
 	"set_con_hdmi=setenv stdout serial,vga; " \
@@ -100,4 +108,14 @@
 	"stdin=serial,usbkbd\0" \
 	"stdout=serial,vga\0"
 
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(SATA, sata, 0) \
+	func(USB, usb, 0)
+
+#include <config_distro_bootcmd.h>
+
 #endif			       /* __TBS2910_CONFIG_H * */
Signature · 1 line
2.26.2
#13 lore raw

PATCH v5 6/7 board: tbs2910: Enable distro_boot support.

Quoted 15 lines · Denis 'GNUtoo' Carikli

This keeps the compatibility with the old bootcmd.

The fdtfile environment variable also needed to be set to imx6q-tbs2910.dtb to enable booting mainline kernels otherwise with extlinux.conf it tries to load mx6-tbs2910.dtb instead.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: +2041 bytes
- data: 0 bytes
- bss: 0 bytes
- total: +2041 bytes

Quoted 1 line

Thanks,
Soeren

Quoted 70 lines

---
Changelog since v4:
-------------------
- Sorted EXTRA_ENV_SETTINGS alphabetically as requested BOOTENV was also moved at the begining of EXTRA_ENV_SETTINGS like on include/configs/colibri-imx8x.h
- Moved BOOT_TARGET_DEVICES at the end of the file as suggested

---
 configs/tbs2910_defconfig |  3 ++-
 include/configs/tbs2910.h | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)
configs/tbs2910_defconfig +2 -1
index 9b25dcff5e..df5013e87c 100644
@@ -12,11 +12,12 @@ CONFIG_AHCI=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
+CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc || run distro_bootcmd; fi"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
 CONFIG_PRE_CONSOLE_BUFFER=y
 CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
include/configs/tbs2910.h +17 -0
index a230111251..17de122852 100644
@@ -76,6 +76,7 @@
 #define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	BOOTENV \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M at 60 " \
 			"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
@@ -92,6 +93,13 @@
 			"bootm 0x10800000 0x10d00000\0" \
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
+	"fdt_addr=0x13000000\0" \
+	"fdt_addr_r=0x13000000\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"kernel_addr_r=0x10008000\0" \
+	"pxefile_addr_r=0x10008000\0" \
+	"ramdisk_addr_r=0x18000000\0" \
+	"scriptaddr=0x14000000\0" \
 	"set_con_serial=setenv stdout serial; " \
 			"setenv stderr serial\0" \
 	"set_con_hdmi=setenv stdout serial,vga; " \
@@ -100,4 +108,14 @@
 	"stdin=serial,usbkbd\0" \
 	"stdout=serial,vga\0"
 
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(SATA, sata, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+
 #endif			       /* __TBS2910_CONFIG_H * */
#14 lore raw

PATCH v5 6/7 board: tbs2910: Enable distro_boot support.

In reply to Denis 'GNUtoo' Carikli
Quoted 15 lines · Denis 'GNUtoo' Carikli

This keeps the compatibility with the old bootcmd.

The fdtfile environment variable also needed to be set to imx6q-tbs2910.dtb to enable booting mainline kernels otherwise with extlinux.conf it tries to load mx6-tbs2910.dtb instead.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, we have the following size differences:
- text: +2041 bytes
- data: 0 bytes
- bss: 0 bytes
- total: +2041 bytes

Quoted 2 lines

Applied to u-boot/next, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200612/a845df96/attachment.sig>
#15 lore raw

PATCH v5 7/7 board: tbs2910: add documentation

In reply to Denis 'GNUtoo' Carikli

This documents the u-boot installation procedure and the hardware in order to get started.

---
Changelog since v4:
-------------------
- Added dded information about SYSBOOT boot support as requested.
- Fixed the switch positions as suggested.

---
 doc/board/index.rst       |   1 +
 doc/board/tbs/index.rst   |   9 ++
 doc/board/tbs/tbs2910.rst | 191 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 201 insertions(+)
 create mode 100644 doc/board/tbs/index.rst
 create mode 100644 doc/board/tbs/tbs2910.rst
doc/board/index.rst +1 -0
index 01b233f737..bb4473152a 100644
@@ -18,5 +18,6 @@ Board-specific doc
    rockchip/index
    sifive/index
    st/index
+   tbs/index
    toradex/index
    xilinx/index
doc/board/tbs/index.rst new file +9 -0
new file mode 100644
index 0000000000..b677bc624f
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+TBS
+===
+
+.. toctree::
+   :maxdepth: 2
+
+   tbs2910
doc/board/tbs/tbs2910.rst new file +191 -0

191 lines not on this page · raw message

Signature · 1 line
2.26.2
#16 lore raw

PATCH v5 7/7 board: tbs2910: add documentation

Quoted 9 lines · Denis 'GNUtoo' Carikli

This documents the u-boot installation procedure and the hardware in order to get started.

---
Changelog since v4:
-------------------
- Added dded information about SYSBOOT boot support as requested.
- Fixed the switch positions as suggested.

Quoted 7 lines
---
 doc/board/index.rst       |   1 +
 doc/board/tbs/index.rst   |   9 ++
 doc/board/tbs/tbs2910.rst | 191 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 201 insertions(+)
 create mode 100644 doc/board/tbs/index.rst
 create mode 100644 doc/board/tbs/tbs2910.rst

Denis,

thanks for providing this documentation. 2 remarks below. Since this already is v5, do you want to resend a fixed version of this series, or should we fix this later in a separate patch?

If you want to send a new version of this patch, please also add ---8<---

board/tbs/tbs2910/MAINTAINERS +0 -0
index a3ad2f712a..1e3c0d0ece 100644
@@ -4,4 +4,5 @@ S:????? Maintained

?F:???? arch/arm/dts/imx6q-tbs2910.dts
?F:???? board/tbs/tbs2910/
?F:???? configs/tbs2910_defconfig
+F:???? doc/board/tbs/
?F:???? include/configs/tbs2910.h
---8<---
(whitespace may be broken in this snippet)

Thanks,
Soeren

Quoted 160 lines
doc/board/index.rst +1 -0
index 01b233f737..bb4473152a 100644
@@ -18,5 +18,6 @@ Board-specific doc
    rockchip/index
    sifive/index
    st/index
+   tbs/index
    toradex/index
    xilinx/index
doc/board/tbs/index.rst new file +9 -0
new file mode 100644
index 0000000000..b677bc624f
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+TBS
+===
+
+.. toctree::
+   :maxdepth: 2
+
+   tbs2910
doc/board/tbs/tbs2910.rst new file +127 -0
new file mode 100644
index 0000000000..e97f2b6e61
@@ -0,0 +1,191 @@
+TBS2910 Matrix ARM miniPC
+=========================
+
+Building
+--------
+To build u-boot for the TBS2910 Matrix ARM miniPC, you can use the following
+procedure:
+
+First add the ARM toolchain to your PATH
+
+Then setup the ARCH and cross compilation environment variables.
+
+When this is done you can then build u-boot for the TBS2910 Matrix ARM miniPC
+with the following commands:
+
+.. code-block:: none
+
+   make mrproper
+   make tbs2910_defconfig
+   make
+
+Once the build is complete, you can find the resulting image as u-boot.imx in
+the current directory.
+
+UART
+----
+The UART voltage is at 3.3V and its settings are 115200bps 8N1
+
+BOOT/UPDATE boot switch:
+------------------------
+The BOOT/UPDATE switch (SW11) is connected to the BOOT_MODE0 and
+BOOT_MODE1 SoC pins. It has "BOOT" and "UPDATE" markings both on
+the PCB and on the plastic case.
+
+When set to the "UPDATE" position, the SoC will use the "Boot From Fuses"
+configuration, and since BT_FUSE_SEL is 0, this makes the SOC jump to serial
+downloader.
+
+When set in the "BOOT" position, the SoC will use the "Internal boot"
+configuration, and since BT_FUSE_SEL is 0, it will then use the GPIO pins
+for the boot configuration.
+
+SW6 binary DIP switch array on the PCB revision 2.1:
+----------------------------------------------------
+On that PCB revision, SW6 has 8 positions.
+
+Switching a position to ON sets the corresponding
+register to 1.
+
+See the following table for a correspondence between the switch positions and
+registers:
+
+===============    ============
+Switch position    Register
+===============    ============
+1                  BOOT_CFG2[3]
+2                  BOOT_CFG2[4]
+3                  BOOT_CFG2[5]
+4                  BOOT_CFG2[6]
+5                  BOOT_CFG1[4]
+6                  BOOT_CFG1[5]
+7                  BOOT_CFG1[6]
+8                  BOOT_CFG1[7]
+===============    ============
+
+For example:
+
+  - To boot from the eMMC: 1:ON , 2:ON, 3:ON, 4:OFF, 5:OFF, 6:ON, 7:ON, 8:OFF
+  - To boot from the microSD slot: 1: ON, 2: OFF, 3: OFF, 4: OFF, 5:OFF, 6:OFF,
+    7:ON, 8:OFF
+  - To boot from the SD slot: 1: OFF, 2: ON, 3: OFF, 4: OFF, 5:OFF, 6:OFF, 7:ON,
+    8:OFF
+  - To boot from SATA: 1: OFF, 2: OFF, 3: OFF, 4: OFF, 5:OFF, 6:ON, 7:OFF, 8:OFF
+
+You can refer to the BOOT_CFG registers in the I.MX6Q reference manual for
+additional details.
+
+SW6 binary DIP switch array on the PCB revision 2.3:
+----------------------------------------------------
+On that PCB revision, SW6 has only 4 positions.
+
+Switching a position to ON sets the corresponding
+register to 1.
+
+See the following table for a correspondence between the switch positions and
+registers:
+
+===============    ============
+Switch position    Register
+===============    ============
+1                  BOOT_CFG2[3]
+2                  BOOT_CFG2[4]
+3                  BOOT_CFG2[5]
+4                  BOOT_CFG1[5]
+===============    ============
+
+For example:
+
+- To boot from the eMMC: 1:ON, 2:ON, 3:ON, 4:ON
+- To boot from the microSD slot: 1:ON, 2:OFF, 3:OFF, 4:OFF
+- To boot from the SD slot: 1:OFF, 2:ON, 3:OFF, 4:OFF
+
+You can refer to the BOOT_CFG registers in the I.MX6Q reference manual for
+additional details.
+
+Loading u-boot from USB:
+------------------------
+If you need to load u-boot from USB, you can use the following instructions:
+
+First build imx_usb_loader, as we will need it to load u-boot from USB. This
+can be done with the following commands:
+
+.. code-block:: none
+
+   git clone git://github.com/boundarydevices/imx_usb_loader.git
+   cd imx_usb_loader
+   make
+
+This will create the resulting imx_usb binary.
+
+When this is done, you can copy the u-boot.imx image that you built earlier
+in in the imx_usb_loader directory.
+
+You will then need to power off the TBS2910 Matrix ARM miniPC and make sure that
+the boot switch is set to "UPDATE"
+
+Once this is done you can connect an USB cable between the computer that will

doc/board/tbs/tbs2910.rst line 137

Quoted 10 lines
doc/board/tbs/tbs2910.rst new file +10 -0
+run imx_usb and the TBS2910 Matrix ARM miniPC.
+
+If you also need to access the u-boot console, you will also need to connect an
+UART cable between the computer running imx_usb and the TBS2910 Matrix ARM
+miniPC.
+
+Once everything is connected you can finally power on the TBS2910 Matrix ARM
+miniPC. The SoC will then jump to the serial download and wait for you.
+
+Finlay, you can load u-boot through USB with with the following command:

Typo:
s/Finlay/Finally/

Quoted 44 lines
doc/board/tbs/tbs2910.rst new file +44 -0
+
+.. code-block:: none
+
+   sudo ./imx_usb -v u-boot.imx
+
+The u-boot boot messages will then appear in the serial console.
+
+Install u-boot on the eMMC:
+---------------------------
+To install u-boot on the eMMC, you first need to boot the TBS2910 Matrix ARM
+miniPC.
+
+Once booted, you can flash u-boot.imx to mmcblk0boot0 with the
+following commands:
+
+.. code-block:: none
+
+   sudo echo 0 >/sys/block/mmcblk0boot0/force_ro
+   sudo dd if=u-boot.imx of=/dev/mmcblk0boot0 bs=1k seek=1; sync
+
+Note that the eMMC card node may vary, so adjust this as needed.
+
+Once the new u-boot version is installed, to boot on it you then need to power
+off the TBS2910 Matrix ARM miniPC.
+
+Once it is off, you need make sure that the boot switch is set to "BOOT" and
+that the SW6 switch is set to boot on the eMMC as described in the previous
+sections.
+
+If you also need to access the u-boot console, you will also need to connect an
+UART cable between the computer running imx_usb and the TBS2910 Matrix ARM
+miniPC.
+
+You can then power up the TBS2910 Matrix ARM miniPC and U-Boot messages will
+appear in the serial console.
+
+Booting a distribution:
+-----------------------
+When booting on the TBS2910 Matrix ARM miniPC, by default U-Boot will first try
+to boot from hardcoded offsets from the start of the eMMC. This is for
+compatibility with the stock GNU/Linux distribution.
+
+If that fails it will then try to boot from several interfaces using
+'distro_bootcmd': It will first try to boot from the microSD slot, then the

doc/board/tbs/tbs2910.rst line 191

Quoted 10 lines
doc/board/tbs/tbs2910.rst new file +10 -0
+SD slot, then the internal eMMC, then the SATA interface and finally the USB
+interface. For more information on how to configure your distribution to boot,
+see 'README.distro'.
+
+Links:
+------
+  - https://www.tbsdtv.com/download/document/tbs2910/TBS2910-Matrix-ARM-mini-PC-SCH_rev2.1.pdf
+    - The schematics for the revision 2.1 of the TBS2910 Matrix ARM miniPC.
+  - https://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf - The
+    SoC reference manual for additional details on the BOOT_CFG registers.

Unfortunately this link does not work for me. Is some sort of login required? Or was this moved away?

#17 lore raw

PATCH v5 7/7 board: tbs2910: add documentation

Quoted 11 lines · On Sat, 30 May 2020 19:18:33 +0200 Soeren Moch <[email protected]> wrote:
Quoted 11 lines
(quoted diff) +3 -0
+Links:
+------
+  -

https://www.tbsdtv.com/download/document/tbs2910/TBS2910-Matrix-ARM-mini-PC-SCH_rev2.1.pdf
+ - The schematics for the revision 2.1 of the TBS2910 Matrix
ARM miniPC.
+ -
https://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf
- The
+ SoC reference manual for additional details on the BOOT_CFG
registers.

Quoted 2 lines

Unfortunately this link does not work for me. Is some sort of login required? Or was this moved away?

I didn't know it has moved.

The old address has been archived by archive.org/web at the following address:
https://web.archive.org/web/20190826025113/https://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf

The Linux kernel has a unique link to this document at this URL:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf

And it's the same since since 2017, and it was introduced by this commit:

Quoted 12 lines

commit e130291212df5ce8160cd2e35387c96439863ad3

Author: Steve Longerbeam <[email protected]>
Date:   Sat Jun 10 16:00:29 2017 -0300

[media] media: Add i.MX media core driver

Add the core media driver for i.MX SOC.

Switch from the v4l2_of_ APIs to the v4l2_fwnode_ APIs. Add the bayer formats to imx-media's list of supported pixel and bus formats.

Quoted 5 lines

However that redirects to https://www.nxp.com/doc/IMX6DQRM which redirects to a login page.

Archive.org/web has many links for that page, but I only found one of them to work, which is older than the archive of the link I had:
https://web.archive.org/web/20180829173128/https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf

I'm not aware of any project tracking datasheet / reference manual URLs and versions though, but it would probably be something very useful to have.

At some point, I plan to see if it's possible to something like that with Wikidata, but I'm not sure if it's fit to track datasheets URLs over time.

Denis.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200604/8f699e73/attachment.sig>

#18 lore raw

PATCH v5 7/7 board: tbs2910: add documentation

Quoted 39 lines · Denis 'GNUtoo' Carikli
Quoted 11 lines · On Sat, 30 May 2020 19:18:33 +0200 Soeren Moch <[email protected]> wrote:
Quoted 11 lines
(quoted diff) +3 -0
+Links:
+------
+  -

https://www.tbsdtv.com/download/document/tbs2910/TBS2910-Matrix-ARM-mini-PC-SCH_rev2.1.pdf
+ - The schematics for the revision 2.1 of the TBS2910 Matrix
ARM miniPC.
+ -
https://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf
- The
+ SoC reference manual for additional details on the BOOT_CFG
registers.

Quoted 2 lines

Unfortunately this link does not work for me. Is some sort of login required? Or was this moved away?

I didn't know it has moved.

The old address has been archived by archive.org/web at the following address:
https://web.archive.org/web/20190826025113/https://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf

The Linux kernel has a unique link to this document at this URL:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf

And it's the same since since 2017, and it was introduced by this commit:

Quoted 12 lines

commit e130291212df5ce8160cd2e35387c96439863ad3

Author: Steve Longerbeam <[email protected]>
Date:   Sat Jun 10 16:00:29 2017 -0300

[media] media: Add i.MX media core driver

Add the core media driver for i.MX SOC.

Switch from the v4l2_of_ APIs to the v4l2_fwnode_ APIs. Add the bayer formats to imx-media's list of supported pixel and bus formats.

Quoted 7 lines
Quoted 5 lines

However that redirects to https://www.nxp.com/doc/IMX6DQRM which redirects to a login page.

AFAIK a login (free of charge, besides registering the e-mail address) is required to download NXP documents. This way you always get the latest document version, not a old version from some archive.

Maybe Fabio knows a better way how to reference NXP manuals? Otherwise for this u-boot board documentation the link from linux would be fine with me, maybe with the additional archive reference.

Soeren

Quoted 13 lines

Archive.org/web has many links for that page, but I only found one of them to work, which is older than the archive of the link I had:
https://web.archive.org/web/20180829173128/https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf

I'm not aware of any project tracking datasheet / reference manual URLs and versions though, but it would probably be something very useful to have.

At some point, I plan to see if it's possible to something like that with Wikidata, but I'm not sure if it's fit to track datasheets URLs over time.

Denis.

#19 lore raw

PATCH v5 7/7 board: tbs2910: add documentation

Hi Soeren,

Quoted 1 line · Soeren Moch

Maybe Fabio knows a better way how to reference NXP manuals? Otherwise

It seems that all the URLs for accessing the i.MX6 Reference Manual require a login now, unfortunately.

#20 lore raw

PATCH v5 7/7 board: tbs2910: add documentation

In reply to Denis 'GNUtoo' Carikli
Quoted 4 lines · Denis 'GNUtoo' Carikli

This documents the u-boot installation procedure and the hardware in order to get started.

I see there's some unresolved discussion about how to have a more persistent link to (now move/removed) documentation but that can be handled in a follow-up I believe.

Applied to u-boot/next, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200612/ed65f8f3/attachment.sig>
#21 lore raw

PATCH v5 1/7 board: tbs2910: disable loadb and loads commands

In reply to Denis 'GNUtoo' Carikli
Quoted 17 lines · Denis 'GNUtoo' Carikli

The loadb and loads commands are not needed for booting.

There are also more reliable and faster alternatives to loadb and loads that can be used with the current configuration.

As that the resulting image is already very close to the size limit, removing the loadb and loads commands shouldn't hurt.

With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction:
- text: 6733 bytes
- data: 116 bytes
- bss: 1172 bytes
- total: 8021 bytes

Quoted 2 lines

Applied to u-boot/next, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200612/d0ec3ade/attachment.sig>