drivers: optee: allow op-tee to access devices on the i2c bus
Subsystems (2)
PATCH 1/1 drivers: optee: allow op-tee to access devices on the i2c bus
Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way.
This trampoline driver allow OP-TEE to access them.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>
--- drivers/tee/optee/optee_msg.h | 18 +++++++++++ drivers/tee/optee/rpc.c | 56 +++++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+)
drivers/tee/optee/optee_msg.h +18 -0
@@ -419,4 +419,22 @@ struct optee_msg_arg {*/ #define OPTEE_MSG_RPC_CMD_SHM_FREE 7 +/* +* Access a device on an i2c bus +* +* [in] param[0].u.value.a mode: RD(0), WR(1) +* [in] param[0].u.value.b i2c adapter +* [in] param[0].u.value.c i2c chip +* +* [io] param[1].u.tmem.buf_ptr physical address +* [io] param[1].u.tmem.size transfer size in bytes +* [io] param[1].u.tmem.shm_ref shared memory reference +* +* [out] param[0].u.value.a bytes transferred +* +*/ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 8 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 +#endif /* _OPTEE_MSG_H */
drivers/tee/optee/rpc.c +56 -0
74 lines not on this page · raw message
Signature · 1 line
2.17.1