Skip to contentSkip to conversation

5.4.44-rc1 review

PATCH In review Greg Kroah-Hartman 5 participants 153 messages Jun 1, 2020 – Feb 4, 2021

Subsystems (4)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.4.44-rc1 review

This is the start of the stable review cycle for the 5.4.44 release. There are 142 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 03 Jun 2020 17:38:19 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.44-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.44-rc1

Changbin Du <[email protected]>
perf: Make perf able to build with latest libbfd

Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_pptp: fix compilation warning with W=1 build

Nathan Chancellor <[email protected]>
netfilter: conntrack: Pass value of ctinfo to __nf_conntrack_update

Pablo Neira Ayuso <[email protected]>
netfilter: conntrack: comparison of unsigned in cthelper confirmation

Dmitry Torokhov <[email protected]>
Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"

Qiushi Wu <[email protected]>
bonding: Fix reference count leak in bond_sysfs_slave_add.

Vladimir Oltean <[email protected]>
net: dsa: declare lockless TX feature for slave ports

David Ahern <[email protected]>
ipv4: nexthop version of fib_info_nh_uses_dev

David Ahern <[email protected]>
nexthop: Expand nexthop_is_multipath in a few places

Nikolay Aleksandrov <[email protected]>
nexthops: don't modify published nexthop groups

David Ahern <[email protected]>
nexthops: Move code from remove_nexthop_from_groups to remove_nh_grp_entry

Eric Dumazet <[email protected]>

    crypto: chelsio/chtls: properly set tp->lsndtime

Qiushi Wu <[email protected]>
qlcnic: fix missing release in qlcnic_83xx_interrupt_test.

Björn Töpel <[email protected]>
xsk: Add overflow check for u64 division, stored into u32

Pradeep Kumar Chitrapu <[email protected]>
ieee80211: Fix incorrect mask for default PE duration

Michael Chan <[email protected]>

    bnxt_en: Fix accumulation of bp->net_stats_prev.

Xin Long <[email protected]>
esp6: get the right proto for transport mode in esp6_gso_encap

Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code

Pablo Neira Ayuso <[email protected]>
netfilter: nfnetlink_cthelper: unbreak userspace helper support

Pablo Neira Ayuso <[email protected]>
netfilter: conntrack: make conntrack userspace helpers work again

Phil Sutter <[email protected]>
netfilter: ipset: Fix subcounter update skip

Michael Braun <[email protected]>
netfilter: nft_reject_bridge: enable reject with bridge vlan

Xin Long <[email protected]>
ip_vti: receive ipip packet by calling ip_tunnel_rcv

Antony Antony <[email protected]>
xfrm: fix error in comment

Xin Long <[email protected]>
xfrm: fix a NULL-ptr deref in xfrm_local_error

Xin Long <[email protected]>
xfrm: fix a warning in xfrm_policy_insert_list

Nicolas Dichtel <[email protected]>
xfrm interface: fix oops when deleting a x-netns interface

Xin Long <[email protected]>
xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output

Xin Long <[email protected]>
xfrm: remove the xfrm_state_put call becofe going to out_reset

Xin Long <[email protected]>
xfrm: do pskb_pull properly in __xfrm_transport_prep

Xin Long <[email protected]>
xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input

Al Viro <[email protected]>
copy_xstate_to_kernel(): don't leave parts of destination uninitialized

Alexander Dahl <[email protected]>
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems

Linus Lüssing <[email protected]>
mac80211: mesh: fix discovery timer re-arming issue / crash

Andy Lutomirski <[email protected]>
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"

Johannes Berg <[email protected]>
cfg80211: fix debugfs rename crash

Helge Deller <[email protected]>
parisc: Fix kernel panic in mem_init()

Qiushi Wu <[email protected]>
iommu: Fix reference count leak in iommu_group_alloc.

Linus Walleij <[email protected]>
gpio: fix locking open drain IRQ lines

Jens Axboe <[email protected]>
Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Arnd Bergmann <[email protected]>
include/asm-generic/topology.h: guard cpumask_of_node() macro argument

Alexander Potapenko <[email protected]>
fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()

Konstantin Khlebnikov <[email protected]>
mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()

Hugh Dickins <[email protected]>
mm,thp: stop leaking unreleased file pages

Valentine Fatiev <[email protected]>
IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode

Simon Ser <[email protected]>
drm/amd/display: drop cursor position check in atomic test

Jason Gunthorpe <[email protected]>
RDMA/core: Fix double destruction of uobject

Jeff Layton <[email protected]>
ceph: flush release queue when handling caps for unknown inode

Jerry Lee <[email protected]>
libceph: ignore pool overlay and cache logic on redirects

Kailang Yang <[email protected]>
ALSA: hda/realtek - Add new codec supported for ALC287

Takashi Iwai <[email protected]>
ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio

Vinod Koul <[email protected]>
clk: qcom: gcc: Fix parent for gpll0_out_even

Eric W. Biederman <[email protected]>
exec: Always set cap_ambient in cap_bprm_set_creds

Chris Chiu <[email protected]>
ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC

Takashi Iwai <[email protected]>
ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround

Changming Liu <[email protected]>
ALSA: hwdep: fix a left shifting 1 by 31 UB bug

Qiushi Wu <[email protected]>
RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()

Tiezhu Yang <[email protected]>
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()

Tiezhu Yang <[email protected]>
gpio: pxa: Fix return value of pxa_gpio_probe()

Peng Hao <[email protected]>
mmc: block: Fix use-after-free issue for rpmb

Hamish Martin <[email protected]>
ARM: dts: bcm: HR2: Fix PPI interrupt types

Vincent Stehlé <[email protected]>
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity

Robert Beckett <[email protected]>
ARM: dts/imx6q-bx50v3: Set display interface clock parents

Kaike Wan <[email protected]>
IB/qib: Call kobject_put() when kobject_init_and_add() fails

Paul Cercueil <[email protected]>
gpu/drm: Ingenic: Fix opaque pointer casted to wrong type

Dennis YC Hsieh <[email protected]>
soc: mediatek: cmdq: return send msg error code

Hsin-Yi Wang <[email protected]>
arm64: dts: mt8173: fix vcodec-enc clock

Takashi Iwai <[email protected]>
gpio: exar: Fix bad handling for ida_simple_get error path

Russell King <[email protected]>
ARM: uaccess: fix DACR mismatch with nested exceptions

Russell King <[email protected]>
ARM: uaccess: integrate uaccess_save and uaccess_restore

Russell King <[email protected]>
ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h

Łukasz Stelmach <[email protected]>
ARM: 8970/1: decompressor: increase tag size

Wei Yongjun <[email protected]>
Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()

Evan Green <[email protected]>
Input: synaptics-rmi4 - really fix attn_data use-after-free

Kevin Locke <[email protected]>
Input: i8042 - add ThinkPad S230u to i8042 reset list

Christophe JAILLET <[email protected]>
Input: dlink-dir685-touchkeys - fix a typo in driver name

Łukasz Patron <[email protected]>
Input: xpad - add custom init packet for Xbox One S controllers

Brendan Shanks <[email protected]>
Input: evdev - call input_flush_device() on release(), not flush()

Kevin Locke <[email protected]>
Input: i8042 - add ThinkPad S230u to i8042 nomux list

James Hilliard <[email protected]>
Input: usbtouchscreen - add support for BonXeon TP

Madhuparna Bhowmik <[email protected]>
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c

Matteo Croce <[email protected]>
samples: bpf: Fix build error

Al Viro <[email protected]>
csky: Fixup raw_copy_from_user()

Steve French <[email protected]>
cifs: Fix null pointer check in cifs_read

Amy Shih <[email protected]>
hwmon: (nct7904) Fix incorrect range of temperature limit registers

Liu Yibin <[email protected]>
csky: Fixup remove duplicate irq_disable

Mao Han <[email protected]>
csky: Fixup perf callchain unwind

Liu Yibin <[email protected]>
csky: Fixup msa highest 3 bits mask

Tero Kristo <[email protected]>
clk: ti: am33xx: fix RTC clock parent

Kefeng Wang <[email protected]>
riscv: stacktrace: Fix undefined reference to `walk_stackframe'

Denis V. Lunev <[email protected]>
IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()

Arnd Bergmann <[email protected]>
net: freescale: select CONFIG_FIXED_PHY where needed

Masahiro Yamada <[email protected]>
usb: gadget: legacy: fix redundant initialization warnings

Christophe JAILLET <[email protected]>
usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()'

Andy Shevchenko <[email protected]>
usb: dwc3: pci: Enable extcon driver for Intel Merrifield

Lei Xue <[email protected]>

    cachefiles: Fix race between read_waiter and read_copier involving op->to_do

Felix Kuehling <[email protected]>
drm/amdgpu: Use GEM obj reference for KFD BOs

Evan Quan <[email protected]>
drm/amd/powerplay: perform PG ungate prior to CG ungate

Evan Quan <[email protected]>
drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate

Andreas Gruenbacher <[email protected]>
gfs2: Grab glock reference sooner in gfs2_add_revoke

Bob Peterson <[email protected]>
gfs2: don't call quota_unhold if quotas are not locked

Bob Peterson <[email protected]>
gfs2: move privileged user check to gfs2_quota_lock_check

Chuhong Yuan <[email protected]>
net: microchip: encx24j600: add missed kthread_stop

Andrew Oakley <[email protected]>
ALSA: usb-audio: add mapping for ASRock TRX40 Creator

Stephen Warren <[email protected]>
gpio: tegra: mask GPIO IRQs during IRQ shutdown

Johan Jonker <[email protected]>
ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi

Johan Jonker <[email protected]>
ARM: dts: rockchip: swap clock-names of gpu nodes

Johan Jonker <[email protected]>
arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node

Johan Jonker <[email protected]>
arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts

Johan Jonker <[email protected]>
ARM: dts: rockchip: fix phy nodename for rk3229-xms6

Johan Jonker <[email protected]>
ARM: dts: rockchip: fix phy nodename for rk3228-evb

Jiri Pirko <[email protected]>
mlxsw: spectrum: Fix use-after-free of split/unsplit/type_set in case reload fails

Qiushi Wu <[email protected]>
net/mlx4_core: fix a memory leak bug.

Qiushi Wu <[email protected]>
net: sun: fix missing release regions in cas_init_one().

Vadim Fedorenko <[email protected]>
net/tls: free record only on encryption error

Vadim Fedorenko <[email protected]>
net/tls: fix encryption error checking

Roi Dayan <[email protected]>
net/mlx5: Annotate mutex destroy for root ns

Shay Drory <[email protected]>
net/mlx5: Fix error flow in case of function_setup failure

Moshe Shemesh <[email protected]>
net/mlx5e: Update netdev txq on completions during closure

Moshe Shemesh <[email protected]>
net/mlx5: Fix memory leak in mlx5_events_init

Roi Dayan <[email protected]>
net/mlx5e: Fix inner tirs handling

Tariq Toukan <[email protected]>
net/mlx5e: kTLS, Destroy key object after destroying the TIS

Eric Dumazet <[email protected]>
tipc: block BH before using dst_cache

Jere Leppänen <[email protected]>
sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and socket is closed

Neil Horman <[email protected]>
sctp: Don't add the shutdown timer if its already been added

Marc Payne <[email protected]>
r8152: support additional Microsoft Surface Ethernet Adapter variant

David Ahern <[email protected]>
nexthop: Fix attribute checking for groups

Vinay Kumar Yadav <[email protected]>
net/tls: fix race condition causing kernel panic

Roman Mashak <[email protected]>
net sched: fix reporting the first-time use timestamp

Yuqi Jin <[email protected]>
net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"

Manivannan Sadhasivam <[email protected]>
net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()

Stephen Worley <[email protected]>
net: nlmsg_cancel() if put fails for nhmsg

Russell King <[email protected]>
net: mvpp2: fix RX hashing for non-10G ports

Moshe Shemesh <[email protected]>
net/mlx5: Add command entry handling completion

Vadim Fedorenko <[email protected]>
net: ipip: fix wrong address family in init error path

Martin KaFai Lau <[email protected]>

    net: inet_csk: Fix so_reuseport bind-address cache in tb->fast*

Boris Sukholitko <[email protected]>
__netif_receive_skb_core: pass skb by reference

Grygorii Strashko <[email protected]>
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend

DENG Qingfang <[email protected]>
net: dsa: mt7530: fix roaming from DSA user ports

Sabrina Dubroca <[email protected]>
net: don't return invalid table id error when we fall back to PF_UNSPEC

Vladimir Oltean <[email protected]>
dpaa_eth: fix usage as DSA master, try 3

Eric Dumazet <[email protected]>
ax25: fix setsockopt(SO_BINDTODEVICE)

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/compressed/vmlinux.lds.S             |   2 +-
 arch/arm/boot/dts/bcm-hr2.dtsi                     |   6 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts           |   2 +-
 arch/arm/boot/dts/imx6q-b450v3.dts                 |   7 --
 arch/arm/boot/dts/imx6q-b650v3.dts                 |   7 --
 arch/arm/boot/dts/imx6q-b850v3.dts                 |  11 --
 arch/arm/boot/dts/imx6q-bx50v3.dtsi                |  15 +++
 arch/arm/boot/dts/rk3036.dtsi                      |   2 +-
 arch/arm/boot/dts/rk3228-evb.dts                   |   2 +-
 arch/arm/boot/dts/rk3229-xms6.dts                  |   2 +-
 arch/arm/boot/dts/rk322x.dtsi                      |   6 +-
 arch/arm/boot/dts/rk3xxx.dtsi                      |   2 +-
 arch/arm/include/asm/assembler.h                   |  75 +------------
 arch/arm/include/asm/uaccess-asm.h                 | 117 +++++++++++++++++++++
 arch/arm/kernel/entry-armv.S                       |  11 +-
 arch/arm/kernel/entry-header.S                     |   9 +-
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   4 +-
 arch/arm64/boot/dts/rockchip/rk3328-evb.dts        |   2 +-
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   8 +-
 arch/csky/abiv1/inc/abi/entry.h                    |   4 +-
 arch/csky/abiv2/inc/abi/entry.h                    |   4 +-
 arch/csky/include/asm/uaccess.h                    |  49 +++++----
 arch/csky/kernel/entry.S                           |   2 -
 arch/csky/kernel/perf_callchain.c                  |   9 +-
 arch/csky/lib/usercopy.c                           |   8 +-
 arch/parisc/mm/init.c                              |   2 +-
 arch/riscv/kernel/stacktrace.c                     |   2 +-
 arch/x86/include/asm/dma.h                         |   2 +-
 arch/x86/include/uapi/asm/unistd.h                 |  11 +-
 arch/x86/kernel/fpu/xstate.c                       |  86 ++++++++-------
 block/blk-core.c                                   |  11 +-
 drivers/clk/qcom/gcc-sm8150.c                      |   3 +-
 drivers/clk/ti/clk-33xx.c                          |   2 +-
 drivers/crypto/chelsio/chtls/chtls_io.c            |   2 +-
 drivers/gpio/gpio-bcm-kona.c                       |   2 +-
 drivers/gpio/gpio-exar.c                           |   7 +-
 drivers/gpio/gpio-pxa.c                            |   4 +-
 drivers/gpio/gpio-tegra.c                          |   1 +
 drivers/gpio/gpiolib.c                             |  11 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c   |   5 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             |   6 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |  12 +--
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |   7 --
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c      |   6 +-
 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c         |   6 +-
 drivers/gpu/drm/ingenic/ingenic-drm.c              |   2 +-
 drivers/hwmon/nct7904.c                            |   4 +-
 drivers/infiniband/core/rdma_core.c                |  20 ++--
 drivers/infiniband/hw/i40iw/i40iw_cm.c             |   8 --
 drivers/infiniband/hw/qib/qib_sysfs.c              |   9 +-
 drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c     |   2 +-
 drivers/infiniband/ulp/ipoib/ipoib.h               |   4 +
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            |  15 +--
 drivers/infiniband/ulp/ipoib/ipoib_ib.c            |   9 +-
 drivers/infiniband/ulp/ipoib/ipoib_main.c          |  10 +-
 drivers/input/evdev.c                              |  19 +---
 drivers/input/joystick/xpad.c                      |  12 +++
 drivers/input/keyboard/dlink-dir685-touchkeys.c    |   2 +-
 drivers/input/rmi4/rmi_driver.c                    |   5 +-
 drivers/input/serio/i8042-x86ia64io.h              |   7 ++
 drivers/input/touchscreen/usbtouchscreen.c         |   1 +
 drivers/iommu/iommu.c                              |   2 +-
 drivers/mmc/core/block.c                           |   2 +-
 drivers/net/bonding/bond_sysfs_slave.c             |   4 +-
 drivers/net/dsa/mt7530.c                           |   9 +-
 drivers/net/dsa/mt7530.h                           |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |   2 +-
 drivers/net/ethernet/freescale/Kconfig             |   2 +
 drivers/net/ethernet/freescale/dpaa/Kconfig        |   1 +
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     |   2 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c     |   2 +-
 drivers/net/ethernet/mellanox/mlx4/fw.c            |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  14 +++
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |   2 +-
 .../ethernet/mellanox/mlx5/core/en_accel/ktls.c    |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  12 ++-
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c   |   4 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |   9 +-
 drivers/net/ethernet/mellanox/mlx5/core/events.c   |   4 +-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  |   6 ++
 .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c  |   4 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |   3 +-
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c     |  14 ++-
 drivers/net/ethernet/mellanox/mlxsw/switchx2.c     |   8 ++
 drivers/net/ethernet/microchip/encx24j600.c        |   5 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |   4 +-
 drivers/net/ethernet/sun/cassini.c                 |   3 +-
 drivers/net/ethernet/ti/cpsw.c                     |   4 +
 drivers/net/hamradio/bpqether.c                    |   3 +-
 drivers/net/usb/cdc_ether.c                        |  11 +-
 drivers/net/usb/r8152.c                            |   1 +
 drivers/soc/mediatek/mtk-cmdq-helper.c             |   4 +-
 drivers/usb/dwc3/dwc3-pci.c                        |   1 +
 drivers/usb/gadget/legacy/inode.c                  |   3 +-
 drivers/usb/phy/phy-twl6030-usb.c                  |  12 ++-
 fs/binfmt_elf.c                                    |   2 +-
 fs/cachefiles/rdwr.c                               |   2 +-
 fs/ceph/caps.c                                     |   2 +-
 fs/cifs/file.c                                     |   2 +-
 fs/gfs2/log.c                                      |   6 +-
 fs/gfs2/quota.c                                    |   6 +-
 fs/gfs2/quota.h                                    |   3 +-
 include/asm-generic/topology.h                     |   2 +-
 include/linux/ieee80211.h                          |   2 +-
 include/linux/mlx5/driver.h                        |   1 +
 include/linux/mm.h                                 |  15 ++-
 include/linux/netfilter/nf_conntrack_pptp.h        |   2 +-
 include/net/act_api.h                              |   3 +-
 include/net/ip_fib.h                               |  11 +-
 include/net/nexthop.h                              |  67 +++++++++---
 include/net/tls.h                                  |   4 +
 include/rdma/uverbs_std_types.h                    |   2 +-
 include/uapi/linux/xfrm.h                          |   2 +-
 mm/khugepaged.c                                    |   1 +
 net/ax25/af_ax25.c                                 |   6 +-
 net/bridge/netfilter/nft_reject_bridge.c           |   6 ++
 net/ceph/osd_client.c                              |   4 +-
 net/core/dev.c                                     |  20 +++-
 net/dsa/slave.c                                    |   1 +
 net/dsa/tag_mtk.c                                  |  15 +++
 net/ipv4/esp4_offload.c                            |   4 +-
 net/ipv4/fib_frontend.c                            |  22 ++--
 net/ipv4/inet_connection_sock.c                    |  43 ++++----
 net/ipv4/ip_vti.c                                  |  23 +++-
 net/ipv4/ipip.c                                    |   2 +-
 net/ipv4/ipmr.c                                    |   2 +-
 net/ipv4/netfilter/nf_nat_pptp.c                   |   7 +-
 net/ipv4/nexthop.c                                 | 105 +++++++++++-------
 net/ipv4/route.c                                   |  14 ++-
 net/ipv6/esp6_offload.c                            |  13 ++-
 net/ipv6/ip6_fib.c                                 |   2 +-
 net/ipv6/ip6mr.c                                   |   2 +-
 net/mac80211/mesh_hwmp.c                           |   7 ++
 net/netfilter/ipset/ip_set_list_set.c              |   2 +-
 net/netfilter/nf_conntrack_core.c                  |  80 ++++++++++++--
 net/netfilter/nf_conntrack_pptp.c                  |  62 ++++++-----
 net/netfilter/nfnetlink_cthelper.c                 |   3 +-
 net/qrtr/qrtr.c                                    |   2 +-
 net/sctp/sm_sideeffect.c                           |  14 ++-
 net/sctp/sm_statefuns.c                            |   9 +-
 net/tipc/udp_media.c                               |   6 +-
 net/tls/tls_sw.c                                   |  50 ++++++---
 net/wireless/core.c                                |   2 +-
 net/xdp/xdp_umem.c                                 |   8 +-
 net/xfrm/xfrm_device.c                             |   8 +-
 net/xfrm/xfrm_input.c                              |   2 +-
 net/xfrm/xfrm_interface.c                          |  21 ++++
 net/xfrm/xfrm_output.c                             |  15 +--
 net/xfrm/xfrm_policy.c                             |   7 +-
 samples/bpf/lwt_len_hist_user.c                    |   2 -
 security/commoncap.c                               |   1 +
 sound/core/hwdep.c                                 |   4 +-
 sound/pci/hda/patch_realtek.c                      |  39 +++++--
 sound/usb/mixer.c                                  |   8 ++
 sound/usb/mixer_maps.c                             |  24 +++++
 sound/usb/quirks-table.h                           |  26 +++++
 tools/arch/x86/include/uapi/asm/unistd.h           |   2 +-
 tools/perf/util/srcline.c                          |  16 ++-
 159 files changed, 1101 insertions(+), 594 deletions(-)
author maintainer
#1 lore raw

PATCH 1/142 ax25: fix setsockopt(SO_BINDTODEVICE)

From: Eric Dumazet <[email protected]>

[ Upstream commit 687775cec056b38a4c8f3291e0dd7a9145f7b667 ]

syzbot was able to trigger this trace [1], probably by using a zero optlen.

While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ.

[1]

BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569
CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 strnlen+0xf9/0x170 lib/string.c:569
 dev_name_hash net/core/dev.c:207 [inline]
 netdev_name_node_lookup net/core/dev.c:277 [inline]
 __dev_get_by_name+0x75/0x2b0 net/core/dev.c:778
 ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654
 __compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403
 __do_compat_sys_setsockopt net/compat.c:413 [inline]
 __se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410
 __ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f57dd9
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101
RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004
RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Local variable ----devname@ax25_setsockopt created at:

 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536
 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ax25/af_ax25.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
net/ax25/af_ax25.c +4 -2
@@ -635,8 +635,10 @@ static int ax25_setsockopt(struct socket
 		break;
 
 	case SO_BINDTODEVICE:
-		if (optlen > IFNAMSIZ)
-			optlen = IFNAMSIZ;
+		if (optlen > IFNAMSIZ - 1)
+			optlen = IFNAMSIZ - 1;
+
+		memset(devname, 0, sizeof(devname));
 
 		if (copy_from_user(devname, optval, optlen)) {
 			res = -EFAULT;
author maintainer
#2 lore raw

PATCH 2/142 dpaa_eth: fix usage as DSA master, try 3

In reply to Greg Kroah-Hartman

From: Vladimir Oltean <[email protected]>

[ Upstream commit 5d14c304bfc14b4fd052dc83d5224376b48f52f0 ]

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +1 -1
@@ -2802,7 +2802,7 @@ static int dpaa_eth_probe(struct platfor
 	}
 
 	/* Do this here, so we can be verbose early */
-	SET_NETDEV_DEV(net_dev, dev);
+	SET_NETDEV_DEV(net_dev, dev->parent);
 	dev_set_drvdata(dev, net_dev);
 
 	priv = netdev_priv(net_dev);
author maintainer
#3 lore raw

PATCH 3/142 net: dont return invalid table id error when we fall back to PF_UNSPEC

In reply to Greg Kroah-Hartman

From: Sabrina Dubroca <[email protected]>

[ Upstream commit 41b4bd986f86331efc599b9a3f5fb86ad92e9af9 ]

In case we can't find a ->dumpit callback for the requested (family,type) pair, we fall back to (PF_UNSPEC,type). In effect, we're in the same situation as if userspace had requested a PF_UNSPEC dump. For RTM_GETROUTE, that handler is rtnl_dump_all, which calls all the registered RTM_GETROUTE handlers.

The requested table id may or may not exist for all of those families. commit ae677bbb4441 ("net: Don't return invalid table id error when dumping all families") fixed the problem when userspace explicitly requests a PF_UNSPEC dump, but missed the fallback case.

For example, when we pass ipv6.disable=1 to a kernel with CONFIG_IP_MROUTE=y and CONFIG_IP_MROUTE_MULTIPLE_TABLES=y, the (PF_INET6, RTM_GETROUTE) handler isn't registered, so we end up in rtnl_dump_all, and listing IPv6 routes will unexpectedly print:

  # ip -6 r
  Error: ipv4: MR table does not exist.
  Dump terminated

commit ae677bbb4441 introduced the dump_all_families variable, which gets set when userspace requests a PF_UNSPEC dump. However, we can't simply set the family to PF_UNSPEC in rtnetlink_rcv_msg in the fallback case to get dump_all_families == true, because some messages types (for example RTM_GETRULE and RTM_GETNEIGH) only register the PF_UNSPEC handler and use the family to filter in the kernel what is dumped to userspace. We would then export more entries, that userspace would have to filter. iproute does that, but other programs may not.

Instead, this patch removes dump_all_families and updates the RTM_GETROUTE handlers to check if the family that is being dumped is their own. When it's not, which covers both the intentional PF_UNSPEC dumps (as dump_all_families did) and the fallback case, ignore the missing table id error.

Fixes cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps")
---
 include/net/ip_fib.h    |    1 -
 net/ipv4/fib_frontend.c |    3 +--
 net/ipv4/ipmr.c         |    2 +-
 net/ipv6/ip6_fib.c      |    2 +-
 net/ipv6/ip6mr.c        |    2 +-
 5 files changed, 4 insertions(+), 6 deletions(-)
include/net/ip_fib.h +0 -1
@@ -244,7 +244,6 @@ struct fib_dump_filter {
 	u32			table_id;
 	/* filter_set is an optimization that an entry is set */
 	bool			filter_set;
-	bool			dump_all_families;
 	bool			dump_routes;
 	bool			dump_exceptions;
 	unsigned char		protocol;
net/ipv4/fib_frontend.c +1 -2
@@ -928,7 +928,6 @@ int ip_valid_fib_dump_req(struct net *ne
 	else
 		filter->dump_exceptions = false;
 
-	filter->dump_all_families = (rtm->rtm_family == AF_UNSPEC);
 	filter->flags    = rtm->rtm_flags;
 	filter->protocol = rtm->rtm_protocol;
 	filter->rt_type  = rtm->rtm_type;
@@ -1000,7 +999,7 @@ static int inet_dump_fib(struct sk_buff
 	if (filter.table_id) {
 		tb = fib_get_table(net, filter.table_id);
 		if (!tb) {
-			if (filter.dump_all_families)
+			if (rtnl_msg_family(cb->nlh) != PF_INET)
 				return skb->len;
 
 			NL_SET_ERR_MSG(cb->extack, "ipv4: FIB table does not exist");
net/ipv4/ipmr.c +1 -1
@@ -2609,7 +2609,7 @@ static int ipmr_rtm_dumproute(struct sk_
 
 		mrt = ipmr_get_table(sock_net(skb->sk), filter.table_id);
 		if (!mrt) {
-			if (filter.dump_all_families)
+			if (rtnl_msg_family(cb->nlh) != RTNL_FAMILY_IPMR)
 				return skb->len;
 
 			NL_SET_ERR_MSG(cb->extack, "ipv4: MR table does not exist");
net/ipv6/ip6_fib.c +1 -1
@@ -613,7 +613,7 @@ static int inet6_dump_fib(struct sk_buff
 	if (arg.filter.table_id) {
 		tb = fib6_get_table(net, arg.filter.table_id);
 		if (!tb) {
-			if (arg.filter.dump_all_families)
+			if (rtnl_msg_family(cb->nlh) != PF_INET6)
 				goto out;
 
 			NL_SET_ERR_MSG_MOD(cb->extack, "FIB table does not exist");
net/ipv6/ip6mr.c +1 -1
@@ -2498,7 +2498,7 @@ static int ip6mr_rtm_dumproute(struct sk
 
 		mrt = ip6mr_get_table(sock_net(skb->sk), filter.table_id);
 		if (!mrt) {
-			if (filter.dump_all_families)
+			if (rtnl_msg_family(cb->nlh) != RTNL_FAMILY_IP6MR)
 				return skb->len;
 
 			NL_SET_ERR_MSG_MOD(cb->extack, "MR table does not exist");
author maintainer
#4 lore raw

PATCH 4/142 net: dsa: mt7530: fix roaming from DSA user ports

In reply to Greg Kroah-Hartman

From: DENG Qingfang <[email protected]>

[ Upstream commit 5e5502e012b8129e11be616acb0f9c34bc8f8adb ]

When a client moves from a DSA user port to a software port in a bridge, it cannot reach any other clients that connected to the DSA user ports. That is because SA learning on the CPU port is disabled, so the switch ignores the client's frames from the CPU port and still thinks it is at the user port.

Fix it by enabling SA learning on the CPU port.

To prevent the switch from learning from flooding frames from the CPU port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames, and let the switch flood them instead of trapping to the CPU port. Multicast frames still need to be trapped to the CPU port for snooping, so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames to disable SA learning.

Fixes b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
---
 drivers/net/dsa/mt7530.c |    9 ++-------
 drivers/net/dsa/mt7530.h |    1 +
 net/dsa/tag_mtk.c        |   15 +++++++++++++++
 3 files changed, 18 insertions(+), 7 deletions(-)
drivers/net/dsa/mt7530.c +2 -7
@@ -639,11 +639,8 @@ mt7530_cpu_port_enable(struct mt7530_pri
 	mt7530_write(priv, MT7530_PVC_P(port),
 		     PORT_SPEC_TAG);
 
-	/* Disable auto learning on the cpu port */
-	mt7530_set(priv, MT7530_PSC_P(port), SA_DIS);
-
-	/* Unknown unicast frame fordwarding to the cpu port */
-	mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port)));
+	/* Unknown multicast frame forwarding to the cpu port */
+	mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port)));
 
 	/* Set CPU port number */
 	if (priv->id == ID_MT7621)
@@ -1246,8 +1243,6 @@ mt7530_setup(struct dsa_switch *ds)
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
-	mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK);
-
 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
 		/* Disable forwarding by default on all ports */
 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
drivers/net/dsa/mt7530.h +1 -0
@@ -31,6 +31,7 @@ enum {
 #define MT7530_MFC			0x10
 #define  BC_FFP(x)			(((x) & 0xff) << 24)
 #define  UNM_FFP(x)			(((x) & 0xff) << 16)
+#define  UNM_FFP_MASK			UNM_FFP(~0)
 #define  UNU_FFP(x)			(((x) & 0xff) << 8)
 #define  UNU_FFP_MASK			UNU_FFP(~0)
 #define  CPU_EN				BIT(7)
net/dsa/tag_mtk.c +15 -0
@@ -15,6 +15,7 @@
 #define MTK_HDR_XMIT_TAGGED_TPID_8100	1
 #define MTK_HDR_RECV_SOURCE_PORT_MASK	GENMASK(2, 0)
 #define MTK_HDR_XMIT_DP_BIT_MASK	GENMASK(5, 0)
+#define MTK_HDR_XMIT_SA_DIS		BIT(6)
 
 static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
@@ -22,6 +23,9 @@ static struct sk_buff *mtk_tag_xmit(stru
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	u8 *mtk_tag;
 	bool is_vlan_skb = true;
+	unsigned char *dest = eth_hdr(skb)->h_dest;
+	bool is_multicast_skb = is_multicast_ether_addr(dest) &&
+				!is_broadcast_ether_addr(dest);
 
 	/* Build the special tag after the MAC Source Address. If VLAN header
 	 * is present, it's required that VLAN header and special tag is
@@ -47,6 +51,10 @@ static struct sk_buff *mtk_tag_xmit(stru
 		     MTK_HDR_XMIT_UNTAGGED;
 	mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
 
+	/* Disable SA learning for multicast frames */
+	if (unlikely(is_multicast_skb))
+		mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS;
+
 	/* Tag control information is kept for 802.1Q */
 	if (!is_vlan_skb) {
 		mtk_tag[2] = 0;
@@ -61,6 +69,9 @@ static struct sk_buff *mtk_tag_rcv(struc
 {
 	int port;
 	__be16 *phdr, hdr;
+	unsigned char *dest = eth_hdr(skb)->h_dest;
+	bool is_multicast_skb = is_multicast_ether_addr(dest) &&
+				!is_broadcast_ether_addr(dest);
 
 	if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
 		return NULL;
@@ -86,6 +97,10 @@ static struct sk_buff *mtk_tag_rcv(struc
 	if (!skb->dev)
 		return NULL;
 
+	/* Only unicast or broadcast frames are offloaded */
+	if (likely(!is_multicast_skb))
+		skb->offload_fwd_mark = 1;
+
 	return skb;
 }
 
author maintainer
#5 lore raw

PATCH 5/142 net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend

In reply to Greg Kroah-Hartman

From: Grygorii Strashko <[email protected]>

[ Upstream commit 4c64b83d03f4aafcdf710caad994cbc855802e74 ]

vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend:
cpsw_suspend()
|- cpsw_ndo_stop()

    |- __hw_addr_ref_unsync_dev()
      |- cpsw_purge_all_mc()
         |- vlan_for_each()
            |- ASSERT_RTNL();

Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls.

Fixes 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast")
---
 drivers/net/ethernet/ti/cpsw.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/ti/cpsw.c +4 -0
@@ -2999,11 +2999,15 @@ static int cpsw_suspend(struct device *d
 	struct cpsw_common *cpsw = dev_get_drvdata(dev);
 	int i;
 
+	rtnl_lock();
+
 	for (i = 0; i < cpsw->data.slaves; i++)
 		if (cpsw->slaves[i].ndev)
 			if (netif_running(cpsw->slaves[i].ndev))
 				cpsw_ndo_stop(cpsw->slaves[i].ndev);
 
+	rtnl_unlock();
+
 	/* Select sleep pin state */
 	pinctrl_pm_select_sleep_state(dev);
 
author maintainer
#6 lore raw

PATCH 6/142 __netif_receive_skb_core: pass skb by reference

In reply to Greg Kroah-Hartman

From: Boris Sukholitko <[email protected]>

[ Upstream commit c0bbbdc32febd4f034ecbf3ea17865785b2c0652 ]

__netif_receive_skb_core may change the skb pointer passed into it (e.g. in rx_handler). The original skb may be freed as a result of this operation.

The callers of __netif_receive_skb_core may further process original skb by using pt_prev pointer returned by __netif_receive_skb_core thus leading to unpleasant effects.

The solution is to pass skb by reference into __netif_receive_skb_core.

v2: Added Fixes tag and comment regarding ppt_prev and skb invariant.

Fixes 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
---
 net/core/dev.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
net/core/dev.c +15 -5
@@ -4713,11 +4713,12 @@ static inline int nf_ingress(struct sk_b
 	return 0;
 }
 
-static int __netif_receive_skb_core(struct sk_buff *skb, bool pfmemalloc,
+static int __netif_receive_skb_core(struct sk_buff **pskb, bool pfmemalloc,
 				    struct packet_type **ppt_prev)
 {
 	struct packet_type *ptype, *pt_prev;
 	rx_handler_func_t *rx_handler;
+	struct sk_buff *skb = *pskb;
 	struct net_device *orig_dev;
 	bool deliver_exact = false;
 	int ret = NET_RX_DROP;
@@ -4748,8 +4749,10 @@ another_round:
 		ret2 = do_xdp_generic(rcu_dereference(skb->dev->xdp_prog), skb);
 		preempt_enable();
 
-		if (ret2 != XDP_PASS)
-			return NET_RX_DROP;
+		if (ret2 != XDP_PASS) {
+			ret = NET_RX_DROP;
+			goto out;
+		}
 		skb_reset_mac_len(skb);
 	}
 
@@ -4899,6 +4902,13 @@ drop:
 	}
 
 out:
+	/* The invariant here is that if *ppt_prev is not NULL
+	 * then skb should also be non-NULL.
+	 *
+	 * Apparently *ppt_prev assignment above holds this invariant due to
+	 * skb dereferencing near it.
+	 */
+	*pskb = skb;
 	return ret;
 }
 
@@ -4908,7 +4918,7 @@ static int __netif_receive_skb_one_core(
 	struct packet_type *pt_prev = NULL;
 	int ret;
 
-	ret = __netif_receive_skb_core(skb, pfmemalloc, &pt_prev);
+	ret = __netif_receive_skb_core(&skb, pfmemalloc, &pt_prev);
 	if (pt_prev)
 		ret = INDIRECT_CALL_INET(pt_prev->func, ipv6_rcv, ip_rcv, skb,
 					 skb->dev, pt_prev, orig_dev);
@@ -4986,7 +4996,7 @@ static void __netif_receive_skb_list_cor
 		struct packet_type *pt_prev = NULL;
 
 		skb_list_del_init(skb);
-		__netif_receive_skb_core(skb, pfmemalloc, &pt_prev);
+		__netif_receive_skb_core(&skb, pfmemalloc, &pt_prev);
 		if (!pt_prev)
 			continue;
 		if (pt_curr != pt_prev || od_curr != orig_dev) {
author maintainer
#7 lore raw

PATCH 7/142 net: inet_csk: Fix so_reuseport bind-address cache in tb->fast*

In reply to Greg Kroah-Hartman

From: Martin KaFai Lau <[email protected]>

[ Upstream commit 88d7fcfa3b1fe670f0412b95be785aafca63352b ]

The commit 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") added a bind-address cache in tb->fast*. The tb->fast* caches the address of a sk which has successfully been binded with SO_REUSEPORT ON. The idea is to avoid the expensive conflict search in inet_csk_bind_conflict().

There is an issue with wildcard matching where sk_reuseport_match() should have returned false but it is currently returning true. It ends up hiding bind conflict. For example,

bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::2]:443"); /* with SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. Still Succeed where it shouldn't */

The last bind("[::]:443") with SO_REUSEPORT on should have failed because it should have a conflict with the very first bind("[::1]:443") which has SO_REUSEPORT off. However, the address "[::2]" is cached in tb->fast* in the second bind. In the last bind, the sk_reuseport_match() returns true because the binding sk's wildcard addr "[::]" matches with the "[::2]" cached in tb->fast*.

The correct bind conflict is reported by removing the second bind such that tb->fast* cache is not involved and forces the bind("[::]:443") to go through the inet_csk_bind_conflict():

bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. -EADDRINUSE */

The expected behavior for sk_reuseport_match() is, it should only allow the "cached" tb->fast* address to be used as a wildcard match but not the address of the binding sk. To do that, the current "bool match_wildcard" arg is split into
"bool match_sk1_wildcard" and "bool match_sk2_wildcard".

This change only affects the sk_reuseport_match() which is only used by inet_csk (e.g. TCP).
The other use cases are calling inet_rcv_saddr_equal() and this patch makes it pass the same "match_wildcard" arg twice to the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)".

Cc Josef Bacik <[email protected]>
Fixes 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
---
 net/ipv4/inet_connection_sock.c |   43 ++++++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 19 deletions(-)
net/ipv4/inet_connection_sock.c +24 -19
@@ -24,17 +24,19 @@
 #include <net/addrconf.h>
 
 #if IS_ENABLED(CONFIG_IPV6)
-/* match_wildcard == true:  IPV6_ADDR_ANY equals to any IPv6 addresses if IPv6
- *                          only, and any IPv4 addresses if not IPv6 only
- * match_wildcard == false: addresses must be exactly the same, i.e.
- *                          IPV6_ADDR_ANY only equals to IPV6_ADDR_ANY,
- *                          and 0.0.0.0 equals to 0.0.0.0 only
+/* match_sk*_wildcard == true:  IPV6_ADDR_ANY equals to any IPv6 addresses
+ *				if IPv6 only, and any IPv4 addresses
+ *				if not IPv6 only
+ * match_sk*_wildcard == false: addresses must be exactly the same, i.e.
+ *				IPV6_ADDR_ANY only equals to IPV6_ADDR_ANY,
+ *				and 0.0.0.0 equals to 0.0.0.0 only
  */
 static bool ipv6_rcv_saddr_equal(const struct in6_addr *sk1_rcv_saddr6,
 				 const struct in6_addr *sk2_rcv_saddr6,
 				 __be32 sk1_rcv_saddr, __be32 sk2_rcv_saddr,
 				 bool sk1_ipv6only, bool sk2_ipv6only,
-				 bool match_wildcard)
+				 bool match_sk1_wildcard,
+				 bool match_sk2_wildcard)
 {
 	int addr_type = ipv6_addr_type(sk1_rcv_saddr6);
 	int addr_type2 = sk2_rcv_saddr6 ? ipv6_addr_type(sk2_rcv_saddr6) : IPV6_ADDR_MAPPED;
@@ -44,8 +46,8 @@ static bool ipv6_rcv_saddr_equal(const s
 		if (!sk2_ipv6only) {
 			if (sk1_rcv_saddr == sk2_rcv_saddr)
 				return true;
-			if (!sk1_rcv_saddr || !sk2_rcv_saddr)
-				return match_wildcard;
+			return (match_sk1_wildcard && !sk1_rcv_saddr) ||
+				(match_sk2_wildcard && !sk2_rcv_saddr);
 		}
 		return false;
 	}
@@ -53,11 +55,11 @@ static bool ipv6_rcv_saddr_equal(const s
 	if (addr_type == IPV6_ADDR_ANY && addr_type2 == IPV6_ADDR_ANY)
 		return true;
 
-	if (addr_type2 == IPV6_ADDR_ANY && match_wildcard &&
+	if (addr_type2 == IPV6_ADDR_ANY && match_sk2_wildcard &&
 	    !(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED))
 		return true;
 
-	if (addr_type == IPV6_ADDR_ANY && match_wildcard &&
+	if (addr_type == IPV6_ADDR_ANY && match_sk1_wildcard &&
 	    !(sk1_ipv6only && addr_type2 == IPV6_ADDR_MAPPED))
 		return true;
 
@@ -69,18 +71,19 @@ static bool ipv6_rcv_saddr_equal(const s
 }
 #endif
 
-/* match_wildcard == true:  0.0.0.0 equals to any IPv4 addresses
- * match_wildcard == false: addresses must be exactly the same, i.e.
- *                          0.0.0.0 only equals to 0.0.0.0
+/* match_sk*_wildcard == true:  0.0.0.0 equals to any IPv4 addresses
+ * match_sk*_wildcard == false: addresses must be exactly the same, i.e.
+ *				0.0.0.0 only equals to 0.0.0.0
  */
 static bool ipv4_rcv_saddr_equal(__be32 sk1_rcv_saddr, __be32 sk2_rcv_saddr,
-				 bool sk2_ipv6only, bool match_wildcard)
+				 bool sk2_ipv6only, bool match_sk1_wildcard,
+				 bool match_sk2_wildcard)
 {
 	if (!sk2_ipv6only) {
 		if (sk1_rcv_saddr == sk2_rcv_saddr)
 			return true;
-		if (!sk1_rcv_saddr || !sk2_rcv_saddr)
-			return match_wildcard;
+		return (match_sk1_wildcard && !sk1_rcv_saddr) ||
+			(match_sk2_wildcard && !sk2_rcv_saddr);
 	}
 	return false;
 }
@@ -96,10 +99,12 @@ bool inet_rcv_saddr_equal(const struct s
 					    sk2->sk_rcv_saddr,
 					    ipv6_only_sock(sk),
 					    ipv6_only_sock(sk2),
+					    match_wildcard,
 					    match_wildcard);
 #endif
 	return ipv4_rcv_saddr_equal(sk->sk_rcv_saddr, sk2->sk_rcv_saddr,
-				    ipv6_only_sock(sk2), match_wildcard);
+				    ipv6_only_sock(sk2), match_wildcard,
+				    match_wildcard);
 }
 EXPORT_SYMBOL(inet_rcv_saddr_equal);
 
@@ -273,10 +278,10 @@ static inline int sk_reuseport_match(str
 					    tb->fast_rcv_saddr,
 					    sk->sk_rcv_saddr,
 					    tb->fast_ipv6_only,
-					    ipv6_only_sock(sk), true);
+					    ipv6_only_sock(sk), true, false);
 #endif
 	return ipv4_rcv_saddr_equal(tb->fast_rcv_saddr, sk->sk_rcv_saddr,
-				    ipv6_only_sock(sk), true);
+				    ipv6_only_sock(sk), true, false);
 }
 
 /* Obtain a reference to a local port for the given sock,
author maintainer
#8 lore raw

PATCH 8/142 net: ipip: fix wrong address family in init error path

In reply to Greg Kroah-Hartman

From: Vadim Fedorenko <[email protected]>

[ Upstream commit 57ebc8f08504f176eb0f25b3e0fde517dec61a4f ]

In case of error with MPLS support the code is misusing AF_INET instead of AF_MPLS.

Fixes 1b69e7e6c4da ("ipip: support MPLS over IPv4")
---
 net/ipv4/ipip.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/ipip.c +1 -1
@@ -698,7 +698,7 @@ out:
 
 rtnl_link_failed:
 #if IS_ENABLED(CONFIG_MPLS)
-	xfrm4_tunnel_deregister(&mplsip_handler, AF_INET);
+	xfrm4_tunnel_deregister(&mplsip_handler, AF_MPLS);
 xfrm_tunnel_mplsip_failed:
 
 #endif
author maintainer
#9 lore raw

PATCH 9/142 net/mlx5: Add command entry handling completion

In reply to Greg Kroah-Hartman

From: Moshe Shemesh <[email protected]>

[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ]

When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command.
Add entry handling completion to avoid this race.

Fixes e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c |   14 ++++++++++++++
 include/linux/mlx5/driver.h                   |    1 +
 2 files changed, 15 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/cmd.c +14 -0
@@ -861,6 +861,7 @@ static void cmd_work_handler(struct work
 	int alloc_ret;
 	int cmd_mode;
 
+	complete(&ent->handling);
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
 	if (!ent->page_queue) {
@@ -978,6 +979,11 @@ static int wait_func(struct mlx5_core_de
 	struct mlx5_cmd *cmd = &dev->cmd;
 	int err;
 
+	if (!wait_for_completion_timeout(&ent->handling, timeout) &&
+	    cancel_work_sync(&ent->work)) {
+		ent->ret = -ECANCELED;
+		goto out_err;
+	}
 	if (cmd->mode == CMD_MODE_POLLING || ent->polling) {
 		wait_for_completion(&ent->done);
 	} else if (!wait_for_completion_timeout(&ent->done, timeout)) {
@@ -985,12 +991,17 @@ static int wait_func(struct mlx5_core_de
 		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 	}
 
+out_err:
 	err = ent->ret;
 
 	if (err == -ETIMEDOUT) {
 		mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n",
 			       mlx5_command_str(msg_to_opcode(ent->in)),
 			       msg_to_opcode(ent->in));
+	} else if (err == -ECANCELED) {
+		mlx5_core_warn(dev, "%s(0x%x) canceled on out of queue timeout.\n",
+			       mlx5_command_str(msg_to_opcode(ent->in)),
+			       msg_to_opcode(ent->in));
 	}
 	mlx5_core_dbg(dev, "err %d, delivery status %s(%d)\n",
 		      err, deliv_status_to_str(ent->status), ent->status);
@@ -1026,6 +1037,7 @@ static int mlx5_cmd_invoke(struct mlx5_c
 	ent->token = token;
 	ent->polling = force_polling;
 
+	init_completion(&ent->handling);
 	if (!callback)
 		init_completion(&ent->done);
 
@@ -1045,6 +1057,8 @@ static int mlx5_cmd_invoke(struct mlx5_c
 	err = wait_func(dev, ent);
 	if (err == -ETIMEDOUT)
 		goto out;
+	if (err == -ECANCELED)
+		goto out_free;
 
 	ds = ent->ts2 - ent->ts1;
 	op = MLX5_GET(mbox_in, in->first.data, opcode);
include/linux/mlx5/driver.h +1 -0
@@ -756,6 +756,7 @@ struct mlx5_cmd_work_ent {
 	struct delayed_work	cb_timeout_work;
 	void		       *context;
 	int			idx;
+	struct completion	handling;
 	struct completion	done;
 	struct mlx5_cmd        *cmd;
 	struct work_struct	work;
author maintainer
#10 lore raw

PATCH 10/142 net: mvpp2: fix RX hashing for non-10G ports

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 3138a07ce219acde4c0d7ea0b6d54ba64153328b ]

When rxhash is enabled on any ethernet port except the first in each CP block, traffic flow is prevented. The analysis is below:

I've been investigating this afternoon, and what I've found, comparing a kernel without 895586d5dc32 and with 895586d5dc32 applied is:

- The table programmed into the hardware via mvpp22_rss_fill_table() appears to be identical with or without the commit.

- When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports that c2.attr[0] and c2.attr[2] are written back containing:

- with 895586d5dc32, failing: 00200000 40000000
- without 895586d5dc32, working: 04000000 40000000

- When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as:

04000000 00000000

The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the first value is the queue number, which comprises two fields. The high 5 bits are 24:29 and the low three are 21:23 inclusive. This comes from:

       c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) |
                     MVPP22_CLS_C2_ATTR0_QLOW(ql);

So, the working case gives eth2 a queue id of 4.0, or 32 as per port->first_rxq, and the non-working case a queue id of 0.1, or 1. The allocation of queue IDs seems to be in mvpp2_port_probe():

        if (priv->hw_version == MVPP21)
                port->first_rxq = port->id * port->nrxqs;
        else
                port->first_rxq = port->id * priv->max_port_rxqs;

Where:

        if (priv->hw_version == MVPP21)
                priv->max_port_rxqs = 8;
        else
                priv->max_port_rxqs = 32;

Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1 (eth2) be 32. It seems the idea is that the first 32 queues belong to port 0, the second 32 queues belong to port 1, etc.

mvpp2_rss_port_c2_enable() gets the queue number from it's parameter, 'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns port->rss_ctx[0].

mvpp22_rss_context_create() is responsible for allocating that, which it does by looking for an unallocated priv->rss_tables[] pointer. This table is shared amongst all ports on the CP silicon.

When we write the tables in mvpp22_rss_fill_table(), the RSS table entry is defined by:

                u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) |
                          MVPP22_RSS_INDEX_TABLE_ENTRY(i);

where rss_ctx is the context ID (queue number) and i is the index in the table.

If we look at what is written:

- The first table to be written has "sel" values of 00000000..0000001f, containing values 0..3. This appears to be for eth1. This is table 0, RX queue number 0.
- The second table has "sel" values of 00000100..0000011f, and appears to be for eth2. These contain values 0x20..0x23. This is table 1, RX queue number 0.
- The third table has "sel" values of 00000200..0000021f, and appears to be for eth3. These contain values 0x40..0x43. This is table 2, RX queue number 0.

How do queue numbers translate to the RSS table? There is another table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE register. Before 895586d5dc32, it was:

       mvpp2_write(priv, MVPP22_RSS_INDEX,
                   MVPP22_RSS_INDEX_QUEUE(port->first_rxq));
       mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE,
                   MVPP22_RSS_TABLE_POINTER(port->id));

and after:

       mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx));
       mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx));

Before the commit, for eth2, that would've contained '32' for the index and '1' for the table pointer - mapping queue 32 to table 1. Remember that this is queue-high.queue-low of 4.0.

After the commit, we appear to map queue 1 to table 1. That again looks fine on the face of it.

Section 9.3.1 of the A8040 manual seems indicate the reason that the queue number is separated. queue-low seems to always come from the classifier, whereas queue-high can be from the ingress physical port number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.

We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to be where our bug comes from.

mvpp2_cls_oversize_rxq_set() sets this up as:

        mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id),
                    (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));

        val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
        val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
        mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);

Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high for eth2 is _always_ 4, so only queues 32 through 39 inclusive are available to eth2. Yet, we're trying to tell the classifier to set queue-high, which will be ignored, to zero. Hence, the queue-high field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be ignored.

This means we end up directing traffic from eth2 not to queue 1, but to queue 33, and then we tell it to look up queue 33 in the RSS table. However, RSS table has not been programmed for queue 33, and so it ends up (presumably) dropping the packets.

It seems that mvpp22_rss_context_create() doesn't take account of the fact that the upper 5 bits of the queue ID can't actually be changed due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either way, these two functions mutually disagree with what queue number should be used.

Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used for over-sized packets attempting to egress through this port. With the classifier having had RSS enabled and directing eth2 traffic to queue 1, we may still have packets appearing on queue 32 for this port.

However, the only way we may end up with over-sized packets attempting to egress through eth2 - is if the A8040 forwards frames between its ports. From what I can see, we don't support that feature, and the kernel restricts the egress packet size to the MTU. In any case, if we were to attempt to transmit an oversized packet, we have no support in the kernel to deal with that appearing in the port's receive queue.

So, this patch attempts to solve the issue by clearing the MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH() from the classifier to define the queue-high field of the queue number.

My testing seems to confirm my findings above - clearing this bit means that if I enable rxhash on eth2, the interface can then pass traffic, as we are now directing traffic to RX queue 1 rather than queue 33. Traffic still seems to work with rxhash off as well.

Fixes 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables")
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c +1 -1
@@ -1070,7 +1070,7 @@ void mvpp2_cls_oversize_rxq_set(struct m
 		    (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));
 
 	val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
-	val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
+	val &= ~MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
 	mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);
 }
 
author maintainer
#11 lore raw

PATCH 11/142 net: nlmsg_cancel() if put fails for nhmsg

In reply to Greg Kroah-Hartman

From: Stephen Worley <[email protected]>

[ Upstream commit d69100b8eee27c2d60ee52df76e0b80a8d492d34 ]

Fixes data remnant seen when we fail to reserve space for a nexthop group during a larger dump.

If we fail the reservation, we goto nla_put_failure and cancel the message.

Reproduce with the following iproute2 commands:
=====================
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy
ip link add dummy20 type dummy
ip link add dummy21 type dummy
ip link add dummy22 type dummy
ip link add dummy23 type dummy
ip link add dummy24 type dummy
ip link add dummy25 type dummy
ip link add dummy26 type dummy
ip link add dummy27 type dummy
ip link add dummy28 type dummy
ip link add dummy29 type dummy
ip link add dummy30 type dummy
ip link add dummy31 type dummy
ip link add dummy32 type dummy

ip link set dummy1 up
ip link set dummy2 up
ip link set dummy3 up
ip link set dummy4 up
ip link set dummy5 up
ip link set dummy6 up
ip link set dummy7 up
ip link set dummy8 up
ip link set dummy9 up
ip link set dummy10 up
ip link set dummy11 up
ip link set dummy12 up
ip link set dummy13 up
ip link set dummy14 up
ip link set dummy15 up
ip link set dummy16 up
ip link set dummy17 up
ip link set dummy18 up
ip link set dummy19 up
ip link set dummy20 up
ip link set dummy21 up
ip link set dummy22 up
ip link set dummy23 up
ip link set dummy24 up
ip link set dummy25 up
ip link set dummy26 up
ip link set dummy27 up
ip link set dummy28 up
ip link set dummy29 up
ip link set dummy30 up
ip link set dummy31 up
ip link set dummy32 up

ip link set dummy33 up
ip link set dummy34 up

ip link set vrf-red up
ip link set vrf-blue up

ip link set dummyVRFred up
ip link set dummyVRFblue up

ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10 ip ro add 1.1.1.11/32 dev dummy11 ip ro add 1.1.1.12/32 dev dummy12 ip ro add 1.1.1.13/32 dev dummy13 ip ro add 1.1.1.14/32 dev dummy14 ip ro add 1.1.1.15/32 dev dummy15 ip ro add 1.1.1.16/32 dev dummy16 ip ro add 1.1.1.17/32 dev dummy17 ip ro add 1.1.1.18/32 dev dummy18 ip ro add 1.1.1.19/32 dev dummy19 ip ro add 1.1.1.20/32 dev dummy20 ip ro add 1.1.1.21/32 dev dummy21 ip ro add 1.1.1.22/32 dev dummy22 ip ro add 1.1.1.23/32 dev dummy23 ip ro add 1.1.1.24/32 dev dummy24 ip ro add 1.1.1.25/32 dev dummy25 ip ro add 1.1.1.26/32 dev dummy26 ip ro add 1.1.1.27/32 dev dummy27 ip ro add 1.1.1.28/32 dev dummy28 ip ro add 1.1.1.29/32 dev dummy29 ip ro add 1.1.1.30/32 dev dummy30 ip ro add 1.1.1.31/32 dev dummy31 ip ro add 1.1.1.32/32 dev dummy32

ip next add id 1 via 1.1.1.1 dev dummy1 ip next add id 2 via 1.1.1.2 dev dummy2 ip next add id 3 via 1.1.1.3 dev dummy3 ip next add id 4 via 1.1.1.4 dev dummy4 ip next add id 5 via 1.1.1.5 dev dummy5 ip next add id 6 via 1.1.1.6 dev dummy6 ip next add id 7 via 1.1.1.7 dev dummy7 ip next add id 8 via 1.1.1.8 dev dummy8 ip next add id 9 via 1.1.1.9 dev dummy9 ip next add id 10 via 1.1.1.10 dev dummy10 ip next add id 11 via 1.1.1.11 dev dummy11 ip next add id 12 via 1.1.1.12 dev dummy12 ip next add id 13 via 1.1.1.13 dev dummy13 ip next add id 14 via 1.1.1.14 dev dummy14 ip next add id 15 via 1.1.1.15 dev dummy15 ip next add id 16 via 1.1.1.16 dev dummy16 ip next add id 17 via 1.1.1.17 dev dummy17 ip next add id 18 via 1.1.1.18 dev dummy18 ip next add id 19 via 1.1.1.19 dev dummy19 ip next add id 20 via 1.1.1.20 dev dummy20 ip next add id 21 via 1.1.1.21 dev dummy21 ip next add id 22 via 1.1.1.22 dev dummy22 ip next add id 23 via 1.1.1.23 dev dummy23 ip next add id 24 via 1.1.1.24 dev dummy24 ip next add id 25 via 1.1.1.25 dev dummy25 ip next add id 26 via 1.1.1.26 dev dummy26 ip next add id 27 via 1.1.1.27 dev dummy27 ip next add id 28 via 1.1.1.28 dev dummy28 ip next add id 29 via 1.1.1.29 dev dummy29 ip next add id 30 via 1.1.1.30 dev dummy30 ip next add id 31 via 1.1.1.31 dev dummy31 ip next add id 32 via 1.1.1.32 dev dummy32

i=100

while [ $i -le 200 ]
do
ip next add id $i group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19

	echo $i

	((i++))

done

ip next add id 999 group 1/2/3/4/5/6

ip next ls

========================

Fixes ab84be7e54fc ("net: Initial nexthop code")
---
 net/ipv4/nexthop.c |    1 +
 1 file changed, 1 insertion(+)
net/ipv4/nexthop.c +1 -0
@@ -277,6 +277,7 @@ out:
 	return 0;
 
 nla_put_failure:
+	nlmsg_cancel(skb, nlh);
 	return -EMSGSIZE;
 }
 
author maintainer
#12 lore raw

PATCH 12/142 net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()

In reply to Greg Kroah-Hartman

From: Manivannan Sadhasivam <[email protected]>

[ Upstream commit d28ea1fbbf437054ef339afec241019f2c4e2bb6 ]

Once the traversal of the list is completed with list_for_each_entry(), the iterator (node) will point to an invalid object. So passing this to qrtr_local_enqueue() which is outside of the iterator block is erroneous eventhough the object is not used.

So fix this by passing NULL to qrtr_local_enqueue().

---
 net/qrtr/qrtr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/qrtr/qrtr.c +1 -1
@@ -711,7 +711,7 @@ static int qrtr_bcast_enqueue(struct qrt
 	}
 	mutex_unlock(&qrtr_node_lock);
 
-	qrtr_local_enqueue(node, skb, type, from, to);
+	qrtr_local_enqueue(NULL, skb, type, from, to);
 
 	return 0;
 }
author maintainer
#13 lore raw

PATCH 13/142 net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"

In reply to Greg Kroah-Hartman

From: Yuqi Jin <[email protected]>

[ Upstream commit a6211caa634da39d861a47437ffcda8b38ef421b ]

Commit adb03115f459 ("net: get rid of an signed integer overflow in ip_idents_reserve()") used atomic_cmpxchg to replace "atomic_add_return" inside the function "ip_idents_reserve". The reason was to avoid UBSAN warning.
However, this change has caused performance degrade and in GCC-8, fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer
and signed integer overflow is now undefined by default at all
optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv /-fno-strict-overflow, so Let's revert it safely.

[1] https://gcc.gnu.org/gcc-8/changes.html

Cc "David S. Miller" <[email protected]>
Cc Alexey Kuznetsov <[email protected]>
Cc Hideaki YOSHIFUJI <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Jiri Pirko <[email protected]>
Cc Arvind Sankar <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Eric Dumazet <[email protected]>
Cc Jiong Wang <[email protected]>
---
 net/ipv4/route.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
net/ipv4/route.c +6 -8
@@ -490,18 +490,16 @@ u32 ip_idents_reserve(u32 hash, int segs
 	atomic_t *p_id = ip_idents + hash % IP_IDENTS_SZ;
 	u32 old = READ_ONCE(*p_tstamp);
 	u32 now = (u32)jiffies;
-	u32 new, delta = 0;
+	u32 delta = 0;
 
 	if (old != now && cmpxchg(p_tstamp, old, now) == old)
 		delta = prandom_u32_max(now - old);
 
-	/* Do not use atomic_add_return() as it makes UBSAN unhappy */
-	do {
-		old = (u32)atomic_read(p_id);
-		new = old + delta + segs;
-	} while (atomic_cmpxchg(p_id, old, new) != old);
-
-	return new - segs;
+	/* If UBSAN reports an error there, please make sure your compiler
+	 * supports -fno-strict-overflow before reporting it that was a bug
+	 * in UBSAN, and it has been fixed in GCC-8.
+	 */
+	return atomic_add_return(segs + delta, p_id) - segs;
 }
 EXPORT_SYMBOL(ip_idents_reserve);
 
author maintainer
#14 lore raw

PATCH 14/142 net sched: fix reporting the first-time use timestamp

In reply to Greg Kroah-Hartman

From: Roman Mashak <[email protected]>

[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]

When a new action is installed, firstuse field of 'tcf_t' is explicitly set to 0. Value of zero means "new action, not yet used"; as a packet hits the action, 'firstuse' is stamped with the current jiffies value.

tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

Fixes 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc Jamal Hadi Salim <[email protected]>
---
 include/net/act_api.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/net/act_api.h +2 -1
@@ -69,7 +69,8 @@ static inline void tcf_tm_dump(struct tc
 {
 	dtm->install = jiffies_to_clock_t(jiffies - stm->install);
 	dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse);
-	dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse);
+	dtm->firstuse = stm->firstuse ?
+		jiffies_to_clock_t(jiffies - stm->firstuse) : 0;
 	dtm->expires = jiffies_to_clock_t(stm->expires);
 }
 
author maintainer
#15 lore raw

PATCH 15/142 net/tls: fix race condition causing kernel panic

In reply to Greg Kroah-Hartman

From: Vinay Kumar Yadav <[email protected]>

[ Upstream commit 0cada33241d9de205522e3858b18e506ca5cce2c ]

tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently. // tls_sw_recvmsg()

	if (atomic_read(&ctx->decrypt_pending))
		crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
	else
		reinit_completion(&ctx->async_wait.completion);

//tls_decrypt_done()
pending = atomic_dec_return(&ctx->decrypt_pending);

  	if (!pending && READ_ONCE(ctx->async_notify))
  		complete(&ctx->async_wait.completion);

Consider the scenario tls_decrypt_done() is about to run complete()

	if (!pending && READ_ONCE(ctx->async_notify))

and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(), then tls_decrypt_done() runs complete(). This sequence of execution results in wrong completion. Consequently, for next decrypt request, it will not wait for completion, eventually on connection close, crypto resources freed, there is no way to handle pending decrypt response.

This race condition can be avoided by having atomic_read() mutually exclusive with atomic_dec_return(),complete().Intoduced spin lock to ensure the mutual exclution.

Addressed similar problem in tx direction.

v1->v2:
- More readable commit message.
- Corrected the lock to fix new race scenario.
- Removed barrier which is not needed now.

Fixes a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
---
 include/net/tls.h |    4 ++++
 net/tls/tls_sw.c  |   33 +++++++++++++++++++++++++++------
 2 files changed, 31 insertions(+), 6 deletions(-)
include/net/tls.h +4 -0
@@ -157,6 +157,8 @@ struct tls_sw_context_tx {
 	struct tls_rec *open_rec;
 	struct list_head tx_list;
 	atomic_t encrypt_pending;
+	/* protect crypto_wait with encrypt_pending */
+	spinlock_t encrypt_compl_lock;
 	int async_notify;
 	int async_capable;
 
@@ -177,6 +179,8 @@ struct tls_sw_context_rx {
 	int async_capable;
 	bool decrypted;
 	atomic_t decrypt_pending;
+	/* protect crypto_wait with decrypt_pending*/
+	spinlock_t decrypt_compl_lock;
 	bool async_notify;
 };
 
net/tls/tls_sw.c +27 -6
@@ -203,10 +203,12 @@ static void tls_decrypt_done(struct cryp
 
 	kfree(aead_req);
 
+	spin_lock_bh(&ctx->decrypt_compl_lock);
 	pending = atomic_dec_return(&ctx->decrypt_pending);
 
-	if (!pending && READ_ONCE(ctx->async_notify))
+	if (!pending && ctx->async_notify)
 		complete(&ctx->async_wait.completion);
+	spin_unlock_bh(&ctx->decrypt_compl_lock);
 }
 
 static int tls_do_decryption(struct sock *sk,
@@ -464,10 +466,12 @@ static void tls_encrypt_done(struct cryp
 			ready = true;
 	}
 
+	spin_lock_bh(&ctx->encrypt_compl_lock);
 	pending = atomic_dec_return(&ctx->encrypt_pending);
 
-	if (!pending && READ_ONCE(ctx->async_notify))
+	if (!pending && ctx->async_notify)
 		complete(&ctx->async_wait.completion);
+	spin_unlock_bh(&ctx->encrypt_compl_lock);
 
 	if (!ready)
 		return;
@@ -923,6 +927,7 @@ int tls_sw_sendmsg(struct sock *sk, stru
 	int num_zc = 0;
 	int orig_size;
 	int ret = 0;
+	int pending;
 
 	if (msg->msg_flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL))
 		return -EOPNOTSUPP;
@@ -1089,13 +1094,19 @@ trim_sgl:
 		goto send_end;
 	} else if (num_zc) {
 		/* Wait for pending encryptions to get completed */
-		smp_store_mb(ctx->async_notify, true);
+		spin_lock_bh(&ctx->encrypt_compl_lock);
+		ctx->async_notify = true;
 
-		if (atomic_read(&ctx->encrypt_pending))
+		pending = atomic_read(&ctx->encrypt_pending);
+		spin_unlock_bh(&ctx->encrypt_compl_lock);
+		if (pending)
 			crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
 		else
 			reinit_completion(&ctx->async_wait.completion);
 
+		/* There can be no concurrent accesses, since we have no
+		 * pending encrypt operations
+		 */
 		WRITE_ONCE(ctx->async_notify, false);
 
 		if (ctx->async_wait.err) {
@@ -1724,6 +1735,7 @@ int tls_sw_recvmsg(struct sock *sk,
 	bool is_kvec = iov_iter_is_kvec(&msg->msg_iter);
 	bool is_peek = flags & MSG_PEEK;
 	int num_async = 0;
+	int pending;
 
 	flags |= nonblock;
 
@@ -1886,8 +1898,11 @@ pick_next_record:
 recv_end:
 	if (num_async) {
 		/* Wait for all previously submitted records to be decrypted */
-		smp_store_mb(ctx->async_notify, true);
-		if (atomic_read(&ctx->decrypt_pending)) {
+		spin_lock_bh(&ctx->decrypt_compl_lock);
+		ctx->async_notify = true;
+		pending = atomic_read(&ctx->decrypt_pending);
+		spin_unlock_bh(&ctx->decrypt_compl_lock);
+		if (pending) {
 			err = crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
 			if (err) {
 				/* one of async decrypt failed */
@@ -1899,6 +1914,10 @@ recv_end:
 		} else {
 			reinit_completion(&ctx->async_wait.completion);
 		}
+
+		/* There can be no concurrent accesses, since we have no
+		 * pending decrypt operations
+		 */
 		WRITE_ONCE(ctx->async_notify, false);
 
 		/* Drain records from the rx_list & copy if required */
@@ -2285,6 +2304,7 @@ int tls_set_sw_offload(struct sock *sk,
 
 	if (tx) {
 		crypto_init_wait(&sw_ctx_tx->async_wait);
+		spin_lock_init(&sw_ctx_tx->encrypt_compl_lock);
 		crypto_info = &ctx->crypto_send.info;
 		cctx = &ctx->tx;
 		aead = &sw_ctx_tx->aead_send;
@@ -2293,6 +2313,7 @@ int tls_set_sw_offload(struct sock *sk,
 		sw_ctx_tx->tx_work.sk = sk;
 	} else {
 		crypto_init_wait(&sw_ctx_rx->async_wait);
+		spin_lock_init(&sw_ctx_rx->decrypt_compl_lock);
 		crypto_info = &ctx->crypto_recv.info;
 		cctx = &ctx->rx;
 		skb_queue_head_init(&sw_ctx_rx->rx_list);
author maintainer
#16 lore raw

PATCH 16/142 nexthop: Fix attribute checking for groups

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

[ Upstream commit 84be69b869a5a496a6cfde9b3c29509207a1f1fa ]

For nexthop groups, attributes after NHA_GROUP_TYPE are invalid, but nh_check_attr_group starts checking at NHA_GROUP. The group type defaults to multipath and the NHA_GROUP_TYPE is currently optional so this has slipped through so far. Fix the attribute checking to handle support of new group types.

Fixes 430a049190de ("nexthop: Add support for nexthop groups")
---
 net/ipv4/nexthop.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/nexthop.c +1 -1
@@ -435,7 +435,7 @@ static int nh_check_attr_group(struct ne
 		if (!valid_group_nh(nh, len, extack))
 			return -EINVAL;
 	}
-	for (i = NHA_GROUP + 1; i < __NHA_MAX; ++i) {
+	for (i = NHA_GROUP_TYPE + 1; i < __NHA_MAX; ++i) {
 		if (!tb[i])
 			continue;
 
author maintainer
#17 lore raw

PATCH 17/142 r8152: support additional Microsoft Surface Ethernet Adapter variant

In reply to Greg Kroah-Hartman

From: Marc Payne <[email protected]>

[ Upstream commit c27a204383616efba5a4194075e90819961ff66a ]

Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to Ethernet and USB Adapter' and may be used as a component of other devices in future. Tested and working with the r8152 driver.

Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend' issue which this device will cause (personally confirmed).

---
 drivers/net/usb/cdc_ether.c |   11 +++++++++--
 drivers/net/usb/r8152.c     |    1 +
 2 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/usb/cdc_ether.c +9 -2
@@ -808,14 +808,21 @@ static const struct usb_device_id	produc
 	.driver_info = 0,
 },
 
-/* Microsoft Surface 3 dock (based on Realtek RTL8153) */
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 	.driver_info = 0,
 },
 
-	/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153B) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x0927, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
drivers/net/usb/r8152.c +1 -0
@@ -5837,6 +5837,7 @@ static const struct usb_device_id rtl815
 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)},
+	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x304f)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x3062)},
author maintainer
#18 lore raw

PATCH 18/142 sctp: Dont add the shutdown timer if its already been added

In reply to Greg Kroah-Hartman

From: Neil Horman <[email protected]>

[ Upstream commit 20a785aa52c82246055a089e55df9dac47d67da1 ]

This BUG halt was reported a while back, but the patch somehow got missed:

PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn"
#0 [f418dd28] crash_kexec at c04a7d8c
#1 [f418dd7c] oops_end at c0863e02
#2 [f418dd90] do_invalid_op at c040aaca
#3 [f418de28] error_code (via invalid_op) at c08631a5

    EAX: f34baac0  EBX: 00000090  ECX: f418deb0  EDX: f5542950  EBP: 00000000
    DS:  007b      ESI: f34ba800  ES:  007b      EDI: f418dea0  GS:  00e0
    CS:  0060      EIP: c046fa5e  ERR: ffffffff  EFLAGS: 00010286
 #4 [f418de5c] add_timer at c046fa5e
 #5 [f418de68] sctp_do_sm at f8db8c77 [sctp]
 #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp]
 #7 [f418df48] inet_shutdown at c080baf9
 #8 [f418df5c] sys_shutdown at c079eedf
 #9 [f418df70] sys_socketcall at c079fe88
    EAX: ffffffda  EBX: 0000000d  ECX: bfceea90  EDX: 0937af98
    DS:  007b      ESI: 0000000c  ES:  007b      EDI: b7150ae4
    SS:  007b      ESP: bfceea7c  EBP: bfceeaa8  GS:  0033
    CS:  0073      EIP: b775c424  ERR: 00000066  EFLAGS: 00000282

It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called.

Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration)

Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues

---
 net/sctp/sm_sideeffect.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
net/sctp/sm_sideeffect.c +11 -3
@@ -1522,9 +1522,17 @@ static int sctp_cmd_interpreter(enum sct
 			timeout = asoc->timeouts[cmd->obj.to];
 			BUG_ON(!timeout);
 
-			timer->expires = jiffies + timeout;
-			sctp_association_hold(asoc);
-			add_timer(timer);
+			/*
+			 * SCTP has a hard time with timer starts.  Because we process
+			 * timer starts as side effects, it can be hard to tell if we
+			 * have already started a timer or not, which leads to BUG
+			 * halts when we call add_timer. So here, instead of just starting
+			 * a timer, if the timer is already started, and just mod
+			 * the timer with the shorter of the two expiration times
+			 */
+			if (!timer_pending(timer))
+				sctp_association_hold(asoc);
+			timer_reduce(timer, jiffies + timeout);
 			break;
 
 		case SCTP_CMD_TIMER_RESTART:
author maintainer
#19 lore raw

PATCH 19/142 sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and socket is closed

In reply to Greg Kroah-Hartman

From: "Jere Lepp�nen" <[email protected]>

[ Upstream commit d3e8e4c11870413789f029a71e72ae6e971fe678 ]

Commit bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") starts shutdown when an association is restarted, if in SHUTDOWN-PENDING state and the socket is closed. However, the rationale stated in that commit applies also when in SHUTDOWN-SENT state - we don't want to move an association to ESTABLISHED state when the socket has been closed, because that results in an association that is unreachable from user space.

The problem scenario:

1. Client crashes and/or restarts.

2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost.

3. Client reconnects using the same addresses and ports.

4. Server's association is restarted. The association and the socket move to ESTABLISHED state, even though the server process has closed its descriptor.

Also, after step 4 when the server process exits, some resources are leaked in an attempt to release the underlying inet sock structure in ESTABLISHED state:

    IPv4: Attempt to release TCP socket in state 1 00000000377288c7

Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if an association is restarted in SHUTDOWN-SENT state and the socket is closed, then start shutdown and don't move the association or the socket to ESTABLISHED state.

Fixes bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.")
---
 net/sctp/sm_statefuns.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
net/sctp/sm_statefuns.c +5 -4
@@ -1856,12 +1856,13 @@ static enum sctp_disposition sctp_sf_do_
 	/* Update the content of current association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
 	sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
-	if (sctp_state(asoc, SHUTDOWN_PENDING) &&
+	if ((sctp_state(asoc, SHUTDOWN_PENDING) ||
+	     sctp_state(asoc, SHUTDOWN_SENT)) &&
 	    (sctp_sstate(asoc->base.sk, CLOSING) ||
 	     sock_flag(asoc->base.sk, SOCK_DEAD))) {
-		/* if were currently in SHUTDOWN_PENDING, but the socket
-		 * has been closed by user, don't transition to ESTABLISHED.
-		 * Instead trigger SHUTDOWN bundled with COOKIE_ACK.
+		/* If the socket has been closed by user, don't
+		 * transition to ESTABLISHED. Instead trigger SHUTDOWN
+		 * bundled with COOKIE_ACK.
 		 */
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
 		return sctp_sf_do_9_2_start_shutdown(net, ep, asoc,
author maintainer
#20 lore raw

PATCH 20/142 tipc: block BH before using dst_cache

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 1378817486d6860f6a927f573491afe65287abf1 ]

dst_cache_get() documents it must be used with BH disabled.

sysbot reported :

BUG: using smp_processor_id() in preemptible [00000000] code: /21697
caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
CPU: 0 PID: 21697 Comm:  Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 check_preemption_disabled lib/smp_processor_id.c:47 [inline]
 debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57
 dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
 tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164
 tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244
 tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526
 tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331
 __tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995
 tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003
 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
 genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
 ___sys_sendmsg+0x100/0x170 net/socket.c:2416
 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Fixes e9c1a793210f ("tipc: add dst_cache support for udp media")
Cc Xin Long <[email protected]>
Cc Jon Maloy <[email protected]>
---
 net/tipc/udp_media.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/tipc/udp_media.c +5 -1
@@ -161,9 +161,11 @@ static int tipc_udp_xmit(struct net *net
 			 struct udp_bearer *ub, struct udp_media_addr *src,
 			 struct udp_media_addr *dst, struct dst_cache *cache)
 {
-	struct dst_entry *ndst = dst_cache_get(cache);
+	struct dst_entry *ndst;
 	int ttl, err = 0;
 
+	local_bh_disable();
+	ndst = dst_cache_get(cache);
 	if (dst->proto == htons(ETH_P_IP)) {
 		struct rtable *rt = (struct rtable *)ndst;
 
@@ -210,9 +212,11 @@ static int tipc_udp_xmit(struct net *net
 					   src->port, dst->port, false);
 #endif
 	}
+	local_bh_enable();
 	return err;
 
 tx_error:
+	local_bh_enable();
 	kfree_skb(skb);
 	return err;
 }
#21 lore raw

Re: [PATCH 5.4 020/142] tipc: block BH before using dst_cache

Quoted 8 lines · Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 1378817486d6860f6a927f573491afe65287abf1 ]

dst_cache_get() documents it must be used with BH disabled.

sysbot reported :

syzbot?

Quoted 78 lines
BUG: using smp_processor_id() in preemptible [00000000] code: /21697
caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
CPU: 0 PID: 21697 Comm:  Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 check_preemption_disabled lib/smp_processor_id.c:47 [inline]
 debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57
 dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
 tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164
 tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244
 tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526
 tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331
 __tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995
 tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003
 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
 genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
 ___sys_sendmsg+0x100/0x170 net/socket.c:2416
 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Fixes e9c1a793210f ("tipc: add dst_cache support for udp media")
Cc Xin Long <[email protected]>
Cc Jon Maloy <[email protected]>
---
 net/tipc/udp_media.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/tipc/udp_media.c +5 -2
@@ -161,9 +161,11 @@ static int tipc_udp_xmit(struct net *net
                         struct udp_bearer *ub, struct udp_media_addr *src,
                         struct udp_media_addr *dst, struct dst_cache *cache)
 {
-       struct dst_entry *ndst = dst_cache_get(cache);
+       struct dst_entry *ndst;
        int ttl, err = 0;
 
+       local_bh_disable();
+       ndst = dst_cache_get(cache);
        if (dst->proto == htons(ETH_P_IP)) {
                struct rtable *rt = (struct rtable *)ndst;
 
@@ -210,9 +212,11 @@ static int tipc_udp_xmit(struct net *net
                                           src->port, dst->port, false);
 #endif
        }
+       local_bh_enable();
        return err;
 
 tx_error:
+       local_bh_enable();
        kfree_skb(skb);
        return err;
 }
 
 
--

You received this message because you are subscribed to the Google Groups "syzkaller" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller/20200601174039.942780034%40linuxfoundation.org.

author maintainer
#22 lore raw

PATCH 21/142 net/mlx5e: kTLS, Destroy key object after destroying the TIS

In reply to Greg Kroah-Hartman

From: Tariq Toukan <[email protected]>

[ Upstream commit 16736e11f43b80a38f98f6add54fab3b8c297df3 ]

The TLS TIS object contains the dek/key ID.
By destroying the key first, the TIS would contain an invalid non-existing key ID.
Reverse the destroy order, this also acheives the desired assymetry between the destroy and the create flows.

Fixes d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.c +1 -1
@@ -69,8 +69,8 @@ static void mlx5e_ktls_del(struct net_de
 	struct mlx5e_ktls_offload_context_tx *tx_priv =
 		mlx5e_get_ktls_tx_priv_ctx(tls_ctx);
 
-	mlx5_ktls_destroy_key(priv->mdev, tx_priv->key_id);
 	mlx5e_destroy_tis(priv->mdev, tx_priv->tisn);
+	mlx5_ktls_destroy_key(priv->mdev, tx_priv->key_id);
 	kvfree(tx_priv);
 }
 
author maintainer
#23 lore raw

PATCH 22/142 net/mlx5e: Fix inner tirs handling

In reply to Greg Kroah-Hartman

From: Roi Dayan <[email protected]>

[ Upstream commit a16b8e0dcf7043bee46174bed0553cc9e36b63a5 ]

In the cited commit inner_tirs argument was added to create and destroy inner tirs, and no indication was added to mlx5e_modify_tirs_hash() function. In order to have a consistent handling, use inner_indir_tir[0].tirn in tirs destroy/modify function as an indication to whether inner tirs are created.
Inner tirs are not created for representors and before this commit, a call to mlx5e_modify_tirs_hash() was sending HW commands to modify non-existent inner tirs.

Fixes 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs")
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h          |    2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c     |   12 +++++++-----
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c      |    4 ++--
 drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c |    4 ++--
 4 files changed, 12 insertions(+), 10 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +1 -1
@@ -1103,7 +1103,7 @@ void mlx5e_close_drop_rq(struct mlx5e_rq
 int mlx5e_create_indirect_rqt(struct mlx5e_priv *priv);
 
 int mlx5e_create_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc);
-void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc);
+void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv);
 
 int mlx5e_create_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs);
 void mlx5e_destroy_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs);
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +7 -5
@@ -2758,7 +2758,8 @@ void mlx5e_modify_tirs_hash(struct mlx5e
 		mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in, inlen);
 	}
 
-	if (!mlx5e_tunnel_inner_ft_supported(priv->mdev))
+	/* Verify inner tirs resources allocated */
+	if (!priv->inner_indir_tir[0].tirn)
 		return;
 
 	for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++) {
@@ -3405,14 +3406,15 @@ out:
 	return err;
 }
 
-void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc)
+void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv)
 {
 	int i;
 
 	for (i = 0; i < MLX5E_NUM_INDIR_TIRS; i++)
 		mlx5e_destroy_tir(priv->mdev, &priv->indir_tir[i]);
 
-	if (!inner_ttc || !mlx5e_tunnel_inner_ft_supported(priv->mdev))
+	/* Verify inner tirs resources allocated */
+	if (!priv->inner_indir_tir[0].tirn)
 		return;
 
 	for (i = 0; i < MLX5E_NUM_INDIR_TIRS; i++)
@@ -5119,7 +5121,7 @@ err_destroy_xsk_rqts:
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
 err_destroy_indirect_tirs:
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 err_destroy_direct_rqts:
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 err_destroy_indirect_rqts:
@@ -5138,7 +5140,7 @@ static void mlx5e_cleanup_nic_rx(struct
 	mlx5e_destroy_direct_tirs(priv, priv->xsk_tir);
 	mlx5e_destroy_direct_rqts(priv, priv->xsk_tir);
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 	mlx5e_destroy_rqt(priv, &priv->indir_rqt);
 	mlx5e_close_drop_rq(&priv->drop_rq);
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +2 -2
@@ -1597,7 +1597,7 @@ err_destroy_ttc_table:
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
 err_destroy_indirect_tirs:
-	mlx5e_destroy_indirect_tirs(priv, false);
+	mlx5e_destroy_indirect_tirs(priv);
 err_destroy_direct_rqts:
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 err_destroy_indirect_rqts:
@@ -1614,7 +1614,7 @@ static void mlx5e_cleanup_rep_rx(struct
 	mlx5_del_flow_rules(rpriv->vport_rx_rule);
 	mlx5e_destroy_ttc_table(priv, &priv->fs.ttc);
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
-	mlx5e_destroy_indirect_tirs(priv, false);
+	mlx5e_destroy_indirect_tirs(priv);
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 	mlx5e_destroy_rqt(priv, &priv->indir_rqt);
 	mlx5e_close_drop_rq(&priv->drop_rq);
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +2 -2
@@ -396,7 +396,7 @@ static int mlx5i_init_rx(struct mlx5e_pr
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
 err_destroy_indirect_tirs:
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 err_destroy_direct_rqts:
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 err_destroy_indirect_rqts:
@@ -412,7 +412,7 @@ static void mlx5i_cleanup_rx(struct mlx5
 {
 	mlx5i_destroy_flow_steering(priv);
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 	mlx5e_destroy_rqt(priv, &priv->indir_rqt);
 	mlx5e_close_drop_rq(&priv->drop_rq);
author maintainer
#24 lore raw

PATCH 23/142 net/mlx5: Fix memory leak in mlx5_events_init

In reply to Greg Kroah-Hartman

From: Moshe Shemesh <[email protected]>

[ Upstream commit df14ad1eccb04a4a28c90389214dbacab085b244 ]

Fix memory leak in mlx5_events_init(), in case
create_single_thread_workqueue() fails, events
struct should be freed.

Fixes 5d3c537f9070 ("net/mlx5: Handle event of power detection in the PCIE slot")
---
 drivers/net/ethernet/mellanox/mlx5/core/events.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/events.c +3 -1
@@ -346,8 +346,10 @@ int mlx5_events_init(struct mlx5_core_de
 	events->dev = dev;
 	dev->priv.events = events;
 	events->wq = create_singlethread_workqueue("mlx5_events");
-	if (!events->wq)
+	if (!events->wq) {
+		kfree(events);
 		return -ENOMEM;
+	}
 	INIT_WORK(&events->pcie_core_work, mlx5_pcie_event);
 
 	return 0;
author maintainer
#25 lore raw

PATCH 24/142 net/mlx5e: Update netdev txq on completions during closure

In reply to Greg Kroah-Hartman

From: Moshe Shemesh <[email protected]>

[ Upstream commit 5e911e2c06bd8c17df29147a5e2d4b17fafda024 ]

On sq closure when we free its descriptors, we should also update netdev txq on completions which would not arrive. Otherwise if we reopen sqs and attach them back, for example on fw fatal recovery flow, we may get tx timeout.

Fixes 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +6 -3
@@ -537,10 +537,9 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *c
 void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq)
 {
 	struct mlx5e_tx_wqe_info *wi;
+	u32 dma_fifo_cc, nbytes = 0;
+	u16 ci, sqcc, npkts = 0;
 	struct sk_buff *skb;
-	u32 dma_fifo_cc;
-	u16 sqcc;
-	u16 ci;
 	int i;
 
 	sqcc = sq->cc;
@@ -565,11 +564,15 @@ void mlx5e_free_txqsq_descs(struct mlx5e
 		}
 
 		dev_kfree_skb_any(skb);
+		npkts++;
+		nbytes += wi->num_bytes;
 		sqcc += wi->num_wqebbs;
 	}
 
 	sq->dma_fifo_cc = dma_fifo_cc;
 	sq->cc = sqcc;
+
+	netdev_tx_completed_queue(sq->txq, npkts, nbytes);
 }
 
 #ifdef CONFIG_MLX5_CORE_IPOIB
author maintainer
#26 lore raw

PATCH 25/142 net/mlx5: Fix error flow in case of function_setup failure

In reply to Greg Kroah-Hartman

From: Shay Drory <[email protected]>

[ Upstream commit 4f7400d5cbaef676e00cdffb0565bf731c6bb09e ]

Currently, if an error occurred during mlx5_function_setup(), we keep dev->state as DEVICE_STATE_UP.
Fixing it by adding a goto label.

Fixes e161105e58da ("net/mlx5: Function setup/teardown procedures")
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +2 -1
@@ -1183,7 +1183,7 @@ static int mlx5_load_one(struct mlx5_cor
 
 	err = mlx5_function_setup(dev, boot);
 	if (err)
-		goto out;
+		goto err_function;
 
 	if (boot) {
 		err = mlx5_init_once(dev);
@@ -1229,6 +1229,7 @@ err_load:
 		mlx5_cleanup_once(dev);
 function_teardown:
 	mlx5_function_teardown(dev, boot);
+err_function:
 	dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR;
 	mutex_unlock(&dev->intf_state_mutex);
 
author maintainer
#27 lore raw

PATCH 26/142 net/mlx5: Annotate mutex destroy for root ns

In reply to Greg Kroah-Hartman

From: Roi Dayan <[email protected]>

commit 9ca415399dae133b00273a4283ef31d003a6818d upstream.

Invoke mutex_destroy() to catch any errors.

Fixes 2cc43b494a6c ("net/mlx5_core: Managing root flow table")
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +6 -0
@@ -417,6 +417,12 @@ static void del_sw_ns(struct fs_node *no
 
 static void del_sw_prio(struct fs_node *node)
 {
+	struct mlx5_flow_root_namespace *root_ns;
+	struct mlx5_flow_namespace *ns;
+
+	fs_get_obj(ns, node);
+	root_ns = container_of(ns, struct mlx5_flow_root_namespace, ns);
+	mutex_destroy(&root_ns->chain_lock);
 	kfree(node);
 }
 
author maintainer
#28 lore raw

PATCH 27/142 net/tls: fix encryption error checking

In reply to Greg Kroah-Hartman

From: Vadim Fedorenko <[email protected]>

commit a7bff11f6f9afa87c25711db8050c9b5324db0e2 upstream.

bpf_exec_tx_verdict() can return negative value for copied variable. In that case this value will be pushed back to caller and the real error code will be lost. Fix it using signed type and checking for positive value.

Fixes d10523d0b3d7 ("net/tls: free the record on encryption error")
Fixes d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
---
 net/tls/tls_sw.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
net/tls/tls_sw.c +6 -5
@@ -781,7 +781,7 @@ static int tls_push_record(struct sock *
 
 static int bpf_exec_tx_verdict(struct sk_msg *msg, struct sock *sk,
 			       bool full_record, u8 record_type,
-			       size_t *copied, int flags)
+			       ssize_t *copied, int flags)
 {
 	struct tls_context *tls_ctx = tls_get_ctx(sk);
 	struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
@@ -917,7 +917,8 @@ int tls_sw_sendmsg(struct sock *sk, stru
 	unsigned char record_type = TLS_RECORD_TYPE_DATA;
 	bool is_kvec = iov_iter_is_kvec(&msg->msg_iter);
 	bool eor = !(msg->msg_flags & MSG_MORE);
-	size_t try_to_copy, copied = 0;
+	size_t try_to_copy;
+	ssize_t copied = 0;
 	struct sk_msg *msg_pl, *msg_en;
 	struct tls_rec *rec;
 	int required_size;
@@ -1126,7 +1127,7 @@ send_end:
 
 	release_sock(sk);
 	mutex_unlock(&tls_ctx->tx_lock);
-	return copied ? copied : ret;
+	return copied > 0 ? copied : ret;
 }
 
 static int tls_sw_do_sendpage(struct sock *sk, struct page *page,
@@ -1140,7 +1141,7 @@ static int tls_sw_do_sendpage(struct soc
 	struct sk_msg *msg_pl;
 	struct tls_rec *rec;
 	int num_async = 0;
-	size_t copied = 0;
+	ssize_t copied = 0;
 	bool full_record;
 	int record_room;
 	int ret = 0;
@@ -1242,7 +1243,7 @@ wait_for_memory:
 	}
 sendpage_end:
 	ret = sk_stream_error(sk, flags, ret);
-	return copied ? copied : ret;
+	return copied > 0 ? copied : ret;
 }
 
 int tls_sw_sendpage_locked(struct sock *sk, struct page *page,
author maintainer
#29 lore raw

PATCH 28/142 net/tls: free record only on encryption error

In reply to Greg Kroah-Hartman

From: Vadim Fedorenko <[email protected]>

commit 635d9398178659d8ddba79dd061f9451cec0b4d1 upstream.

We cannot free record on any transient error because it leads to losing previos data. Check socket error to know whether record must be freed or not.

Fixes d10523d0b3d7 ("net/tls: free the record on encryption error")
---
 net/tls/tls_sw.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
net/tls/tls_sw.c +4 -2
@@ -797,9 +797,10 @@ static int bpf_exec_tx_verdict(struct sk
 	psock = sk_psock_get(sk);
 	if (!psock || !policy) {
 		err = tls_push_record(sk, flags, record_type);
-		if (err && err != -EINPROGRESS) {
+		if (err && sk->sk_err == EBADMSG) {
 			*copied -= sk_msg_free(sk, msg);
 			tls_free_open_rec(sk);
+			err = -sk->sk_err;
 		}
 		if (psock)
 			sk_psock_put(sk, psock);
@@ -825,9 +826,10 @@ more_data:
 	switch (psock->eval) {
 	case __SK_PASS:
 		err = tls_push_record(sk, flags, record_type);
-		if (err && err != -EINPROGRESS) {
+		if (err && sk->sk_err == EBADMSG) {
 			*copied -= sk_msg_free(sk, msg);
 			tls_free_open_rec(sk);
+			err = -sk->sk_err;
 			goto out_err;
 		}
 		break;
author maintainer
#30 lore raw

PATCH 29/142 net: sun: fix missing release regions in cas_init_one().

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

commit 5a730153984dd13f82ffae93d7170d76eba204e9 upstream.

In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res".

Fixes 1f26dac32057 ("[NET]: Add Sun Cassini driver.")
---
 drivers/net/ethernet/sun/cassini.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/sun/cassini.c +1 -2
@@ -4971,7 +4971,7 @@ static int cas_init_one(struct pci_dev *
 					  cas_cacheline_size)) {
 			dev_err(&pdev->dev, "Could not set PCI cache "
 			       "line size\n");
-			goto err_write_cacheline;
+			goto err_out_free_res;
 		}
 	}
 #endif
@@ -5144,7 +5144,6 @@ err_out_iounmap:
 err_out_free_res:
 	pci_release_regions(pdev);
 
-err_write_cacheline:
 	/* Try to restore it in case the error occurred after we
 	 * set it.
 	 */
author maintainer
#31 lore raw

PATCH 30/142 net/mlx4_core: fix a memory leak bug.

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

commit febfd9d3c7f74063e8e630b15413ca91b567f963 upstream.

In function mlx4_opreq_action(), pointer "mailbox" is not released, when mlx4_cmd_box() return and error, causing a memory leak bug. Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can free this pointer.

Fixes fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware")
---
 drivers/net/ethernet/mellanox/mlx4/fw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx4/fw.c +1 -1
@@ -2734,7 +2734,7 @@ void mlx4_opreq_action(struct work_struc
 		if (err) {
 			mlx4_err(dev, "Failed to retrieve required operation: %d\n",
 				 err);
-			return;
+			goto out;
 		}
 		MLX4_GET(modifier, outbox, GET_OP_REQ_MODIFIER_OFFSET);
 		MLX4_GET(token, outbox, GET_OP_REQ_TOKEN_OFFSET);
author maintainer
#32 lore raw

PATCH 31/142 mlxsw: spectrum: Fix use-after-free of split/unsplit/type_set in case reload fails

In reply to Greg Kroah-Hartman

From: Jiri Pirko <[email protected]>

commit 4340f42f207eacb81e7a6b6bb1e3b6afad9a2e26 upstream.

In case of reload fail, the mlxsw_sp->ports contains a pointer to a freed memory (either by reload_down() or reload_up() error path). Fix this by initializing the pointer to NULL and checking it before dereferencing in split/unsplit/type_set callpaths.

Fixes 24cc68ad6c46 ("mlxsw: core: Add support for reload")
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c |   14 ++++++++++++--
 drivers/net/ethernet/mellanox/mlxsw/switchx2.c |    8 ++++++++
 2 files changed, 20 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum.c +12 -2
@@ -3932,6 +3932,7 @@ static void mlxsw_sp_ports_remove(struct
 	mlxsw_sp_cpu_port_remove(mlxsw_sp);
 	kfree(mlxsw_sp->port_to_module);
 	kfree(mlxsw_sp->ports);
+	mlxsw_sp->ports = NULL;
 }
 
 static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp)
@@ -3986,6 +3987,7 @@ err_cpu_port_create:
 	kfree(mlxsw_sp->port_to_module);
 err_port_to_module_alloc:
 	kfree(mlxsw_sp->ports);
+	mlxsw_sp->ports = NULL;
 	return err;
 }
 
@@ -4040,6 +4042,14 @@ static void mlxsw_sp_port_unsplit_create
 	}
 }
 
+static struct mlxsw_sp_port *
+mlxsw_sp_port_get_by_local_port(struct mlxsw_sp *mlxsw_sp, u8 local_port)
+{
+	if (mlxsw_sp->ports && mlxsw_sp->ports[local_port])
+		return mlxsw_sp->ports[local_port];
+	return NULL;
+}
+
 static int mlxsw_sp_port_split(struct mlxsw_core *mlxsw_core, u8 local_port,
 			       unsigned int count,
 			       struct netlink_ext_ack *extack)
@@ -4058,7 +4068,7 @@ static int mlxsw_sp_port_split(struct ml
 	local_ports_in_1x = MLXSW_CORE_RES_GET(mlxsw_core, LOCAL_PORTS_IN_1X);
 	local_ports_in_2x = MLXSW_CORE_RES_GET(mlxsw_core, LOCAL_PORTS_IN_2X);
 
-	mlxsw_sp_port = mlxsw_sp->ports[local_port];
+	mlxsw_sp_port = mlxsw_sp_port_get_by_local_port(mlxsw_sp, local_port);
 	if (!mlxsw_sp_port) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port number \"%d\" does not exist\n",
 			local_port);
@@ -4136,7 +4146,7 @@ static int mlxsw_sp_port_unsplit(struct
 	local_ports_in_1x = MLXSW_CORE_RES_GET(mlxsw_core, LOCAL_PORTS_IN_1X);
 	local_ports_in_2x = MLXSW_CORE_RES_GET(mlxsw_core, LOCAL_PORTS_IN_2X);
 
-	mlxsw_sp_port = mlxsw_sp->ports[local_port];
+	mlxsw_sp_port = mlxsw_sp_port_get_by_local_port(mlxsw_sp, local_port);
 	if (!mlxsw_sp_port) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port number \"%d\" does not exist\n",
 			local_port);
drivers/net/ethernet/mellanox/mlxsw/switchx2.c +8 -0
@@ -1258,6 +1258,7 @@ static void mlxsw_sx_ports_remove(struct
 		if (mlxsw_sx_port_created(mlxsw_sx, i))
 			mlxsw_sx_port_remove(mlxsw_sx, i);
 	kfree(mlxsw_sx->ports);
+	mlxsw_sx->ports = NULL;
 }
 
 static int mlxsw_sx_ports_create(struct mlxsw_sx *mlxsw_sx)
@@ -1292,6 +1293,7 @@ err_port_module_info_get:
 		if (mlxsw_sx_port_created(mlxsw_sx, i))
 			mlxsw_sx_port_remove(mlxsw_sx, i);
 	kfree(mlxsw_sx->ports);
+	mlxsw_sx->ports = NULL;
 	return err;
 }
 
@@ -1375,6 +1377,12 @@ static int mlxsw_sx_port_type_set(struct
 	u8 module, width;
 	int err;
 
+	if (!mlxsw_sx->ports || !mlxsw_sx->ports[local_port]) {
+		dev_err(mlxsw_sx->bus_info->dev, "Port number \"%d\" does not exist\n",
+			local_port);
+		return -EINVAL;
+	}
+
 	if (new_type == DEVLINK_PORT_TYPE_AUTO)
 		return -EOPNOTSUPP;
 
author maintainer
#33 lore raw

PATCH 32/142 ARM: dts: rockchip: fix phy nodename for rk3228-evb

In reply to Greg Kroah-Hartman

From: Johan Jonker <[email protected]>

[ Upstream commit 287e0d538fcec2f6e8eb1e565bf0749f3b90186d ]

A test with the command below gives for example this error:

arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0:
'#phy-cells' is a required property

The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property

make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml

---
 arch/arm/boot/dts/rk3228-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/rk3228-evb.dts +1 -1
index 5670b33fd1bd..aed879db6c15 100644
@@ -46,7 +46,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			clocks = <&cru SCLK_MAC_PHY>;
Signature · 1 line
2.25.1
author maintainer
#34 lore raw

PATCH 33/142 ARM: dts: rockchip: fix phy nodename for rk3229-xms6

In reply to Greg Kroah-Hartman

From: Johan Jonker <[email protected]>

[ Upstream commit 621c8d0c233e260232278a4cfd3380caa3c1da29 ]

A test with the command below gives for example this error:

arch/arm/boot/dts/rk3229-xms6.dt.yaml: phy@0:
'#phy-cells' is a required property

The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property

make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml

---
 arch/arm/boot/dts/rk3229-xms6.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/rk3229-xms6.dts +1 -1
index 679fc2b00e5a..933ef69da32a 100644
@@ -150,7 +150,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400",
 			             "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
Signature · 1 line
2.25.1
author maintainer
#35 lore raw

PATCH 34/142 arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts

In reply to Greg Kroah-Hartman

From: Johan Jonker <[email protected]>

[ Upstream commit c617ed88502d0b05149e7f32f3b3fd8a0663f7e2 ]

The status was removed of the '&gmac2phy' node with the apply of a patch long time ago, so fix status for '&gmac2phy' in 'rk3328-evb.dts'.

---
 arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/rockchip/rk3328-evb.dts +1 -1
index 6abc6f4a86cf..05265b38cc02 100644
@@ -86,7 +86,7 @@
 	assigned-clock-rate = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+	status = "okay";
 };
 
 &i2c1 {
Signature · 1 line
2.25.1
author maintainer
#36 lore raw

PATCH 35/142 arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node

In reply to Greg Kroah-Hartman

From: Johan Jonker <[email protected]>

[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ]

Dts files with Rockchip rk3399 'gpu' nodes were manually verified. In order to automate this process arm,mali-midgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-midgard.yaml expects interrupts and interrupt-names values in the same order. Fix this for rk3399.

make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-midgard.yaml

---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/rockchip/rk3399.dtsi +4 -4
index cd97016b7c18..c5d8d1c58291 100644
@@ -1881,10 +1881,10 @@
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
Signature · 1 line
2.25.1
author maintainer
#37 lore raw

PATCH 36/142 ARM: dts: rockchip: swap clock-names of gpu nodes

In reply to Greg Kroah-Hartman

From: Johan Jonker <[email protected]>

[ Upstream commit b14f3898d2c25a9b47a61fb879d0b1f3af92c59b ]

Dts files with Rockchip 'gpu' nodes were manually verified. In order to automate this process arm,mali-utgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.

---
 arch/arm/boot/dts/rk3036.dtsi | 2 +-
 arch/arm/boot/dts/rk322x.dtsi | 2 +-
 arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/rk3036.dtsi +1 -1
index c776321b2cc4..d282a7b638d8 100644
@@ -128,7 +128,7 @@
 		assigned-clocks = <&cru SCLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU>;
 		status = "disabled";
 	};
arch/arm/boot/dts/rk322x.dtsi +1 -1
index 340ed6ccb08f..c60784f3aa75 100644
@@ -561,7 +561,7 @@
 				  "pp1",
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU_A>;
 		status = "disabled";
 	};
arch/arm/boot/dts/rk3xxx.dtsi +1 -1
index 97307a405e60..bce0b05ef7bf 100644
@@ -84,7 +84,7 @@
 		compatible = "arm,mali-400";
 		reg = <0x10090000 0x10000>;
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		assigned-clocks = <&cru ACLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_GPU>;
Signature · 1 line
2.25.1
author maintainer
#38 lore raw

PATCH 37/142 ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi

In reply to Greg Kroah-Hartman

From: Johan Jonker <[email protected]>

[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ]

A test with the command below gives these errors:

arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property

The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'.

make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml

---
 arch/arm/boot/dts/rk322x.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/rk322x.dtsi +2 -2
index c60784f3aa75..6bb78b19c555 100644
@@ -1033,7 +1033,7 @@
 			};
 		};
 
-		spi-0 {
+		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
 			};
@@ -1051,7 +1051,7 @@
 			};
 		};
 
-		spi-1 {
+		spi1 {
 			spi1_clk: spi1-clk {
 				rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
 			};
Signature · 1 line
2.25.1
author maintainer
#39 lore raw

PATCH 38/142 gpio: tegra: mask GPIO IRQs during IRQ shutdown

In reply to Greg Kroah-Hartman

From: Stephen Warren <[email protected]>

[ Upstream commit 0cf253eed5d2bdf7bb3152457b38f39b012955f7 ]

The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ client has released the GPIO IRQ. This allows the HW to raise IRQs, and SW to process them, after shutdown. Fix this by masking the IRQ when it's shut down. This is usually taken care of by the irqchip core, but since this driver has a custom irq_shutdown implementation, it must do this explicitly itself.

---
 drivers/gpio/gpio-tegra.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpio/gpio-tegra.c +1 -0
index 8a01d3694b28..cecde5440a39 100644
@@ -365,6 +365,7 @@ static void tegra_gpio_irq_shutdown(struct irq_data *d)
 	struct tegra_gpio_info *tgi = bank->tgi;
 	unsigned int gpio = d->hwirq;
 
+	tegra_gpio_irq_mask(d);
 	gpiochip_unlock_as_irq(&tgi->gc, gpio);
 }
 
Signature · 1 line
2.25.1
author maintainer
#40 lore raw

PATCH 39/142 ALSA: usb-audio: add mapping for ASRock TRX40 Creator

In reply to Greg Kroah-Hartman

From: Andrew Oakley <[email protected]>

[ Upstream commit da7a8f1a8fc3e14c6dcc52b4098bddb8f20390be ]

This is another TRX40 based motherboard with ALC1220-VB USB-audio that requires a static mapping table.

This motherboard also has a PCI device which advertises no codecs. The PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD vendor ID, don't blacklist for now in case other boards have a working audio device with the same ssid.

alsa-info.sh report for this board:
http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c

---
 sound/usb/mixer_maps.c   | 5 +++++
 sound/usb/quirks-table.h | 1 +
 2 files changed, 6 insertions(+)
sound/usb/mixer_maps.c +5 -0
index 39d6c6fa5e33..2255f9abd7a5 100644
@@ -529,6 +529,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
 		.map = trx40_mobo_map,
 		.connector_map = trx40_mobo_connector_map,
 	},
+	{	/* Asrock TRX40 Creator */
+		.id = USB_ID(0x26ce, 0x0a01),
+		.map = trx40_mobo_map,
+		.connector_map = trx40_mobo_connector_map,
+	},
 	{ 0 } /* terminator */
 };
 
sound/usb/quirks-table.h +1 -0
index 8c2f5c23e1b4..aa4c16ce0e57 100644
@@ -3647,6 +3647,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */
 ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */
 ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */
+ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */
 #undef ALC1220_VB_DESKTOP
 
 #undef USB_DEVICE_VENDOR_SPEC
Signature · 1 line
2.25.1
author maintainer
#41 lore raw

PATCH 40/142 net: microchip: encx24j600: add missed kthread_stop

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit ff8ce319e9c25e920d994cc35236f0bb32dfc8f3 ]

This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove.
Add the missed kthread_stop() to fix it.

---
 drivers/net/ethernet/microchip/encx24j600.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/microchip/encx24j600.c +4 -1
index 52c41d11f565..c3a6edc0ddf6 100644
@@ -1070,7 +1070,7 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 	if (unlikely(ret)) {
 		netif_err(priv, probe, ndev, "Error %d initializing card encx24j600 card\n",
 			  ret);
-		goto out_free;
+		goto out_stop;
 	}
 
 	eidled = encx24j600_read_reg(priv, EIDLED);
@@ -1088,6 +1088,8 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 
 out_unregister:
 	unregister_netdev(priv->ndev);
+out_stop:
+	kthread_stop(priv->kworker_task);
 out_free:
 	free_netdev(ndev);
 
@@ -1100,6 +1102,7 @@ static int encx24j600_spi_remove(struct spi_device *spi)
 	struct encx24j600_priv *priv = dev_get_drvdata(&spi->dev);
 
 	unregister_netdev(priv->ndev);
+	kthread_stop(priv->kworker_task);
 
 	free_netdev(priv->ndev);
 
Signature · 1 line
2.25.1
author maintainer
#42 lore raw

PATCH 41/142 gfs2: move privileged user check to gfs2_quota_lock_check

In reply to Greg Kroah-Hartman

From: Bob Peterson <[email protected]>

[ Upstream commit 4ed0c30811cb4d30ef89850b787a53a84d5d2bcb ]

Before this patch, function gfs2_quota_lock checked if it was called from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions are separate from the lock_check function, and you can do lock and unlock without actually checking the quotas.

This patch moves the check to gfs2_quota_lock_check.

---
 fs/gfs2/quota.c | 3 +--
 fs/gfs2/quota.h | 3 ++-
 2 files changed, 3 insertions(+), 3 deletions(-)
fs/gfs2/quota.c +1 -2
index 7c016a082aa6..cbee745169b8 100644
@@ -1040,8 +1040,7 @@ int gfs2_quota_lock(struct gfs2_inode *ip, kuid_t uid, kgid_t gid)
 	u32 x;
 	int error = 0;
 
-	if (capable(CAP_SYS_RESOURCE) ||
-	    sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
+	if (sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
 		return 0;
 
 	error = gfs2_quota_hold(ip, uid, gid);
fs/gfs2/quota.h +2 -1
index 765627d9a91e..fe68a91dc16f 100644
@@ -44,7 +44,8 @@ static inline int gfs2_quota_lock_check(struct gfs2_inode *ip,
 	int ret;
 
 	ap->allowed = UINT_MAX; /* Assume we are permitted a whole lot */
-	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
+	if (capable(CAP_SYS_RESOURCE) ||
+	    sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
 		return 0;
 	ret = gfs2_quota_lock(ip, NO_UID_QUOTA_CHANGE, NO_GID_QUOTA_CHANGE);
 	if (ret)
Signature · 1 line
2.25.1
author maintainer
#43 lore raw

PATCH 42/142 gfs2: dont call quota_unhold if quotas are not locked

In reply to Greg Kroah-Hartman

From: Bob Peterson <[email protected]>

[ Upstream commit c9cb9e381985bbbe8acd2695bbe6bd24bf06b81c ]

Before this patch, function gfs2_quota_unlock checked if quotas are turned off, and if so, it branched to label out, which called gfs2_quota_unhold. With the new system of gfs2_qa_get and put, we no longer want to call gfs2_quota_unhold or we won't balance our gets and puts.

---
 fs/gfs2/quota.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/gfs2/quota.c +1 -2
index cbee745169b8..91ca4920bf03 100644
@@ -1113,7 +1113,7 @@ void gfs2_quota_unlock(struct gfs2_inode *ip)
 	int found;
 
 	if (!test_and_clear_bit(GIF_QD_LOCKED, &ip->i_flags))
-		goto out;
+		return;
 
 	for (x = 0; x < ip->i_qadata->qa_qd_num; x++) {
 		struct gfs2_quota_data *qd;
@@ -1150,7 +1150,6 @@ void gfs2_quota_unlock(struct gfs2_inode *ip)
 			qd_unlock(qda[x]);
 	}
 
-out:
 	gfs2_quota_unhold(ip);
 }
 
Signature · 1 line
2.25.1
author maintainer
#44 lore raw

PATCH 43/142 gfs2: Grab glock reference sooner in gfs2_add_revoke

In reply to Greg Kroah-Hartman

From: Andreas Gruenbacher <[email protected]>

[ Upstream commit f4e2f5e1a527ce58fc9f85145b03704779a3123e ]

This patch rearranges gfs2_add_revoke so that the extra glock reference is added earlier on in the function to avoid races in which the glock is freed before the new reference is taken.

---
 fs/gfs2/log.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/gfs2/log.c +3 -3
index 47bc27d4169e..110e5c4db819 100644
@@ -598,13 +598,13 @@ void gfs2_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd)
 	struct buffer_head *bh = bd->bd_bh;
 	struct gfs2_glock *gl = bd->bd_gl;
 
+	sdp->sd_log_num_revoke++;
+	if (atomic_inc_return(&gl->gl_revokes) == 1)
+		gfs2_glock_hold(gl);
 	bh->b_private = NULL;
 	bd->bd_blkno = bh->b_blocknr;
 	gfs2_remove_from_ail(bd); /* drops ref on bh */
 	bd->bd_bh = NULL;
-	sdp->sd_log_num_revoke++;
-	if (atomic_inc_return(&gl->gl_revokes) == 1)
-		gfs2_glock_hold(gl);
 	set_bit(GLF_LFLUSH, &gl->gl_flags);
 	list_add(&bd->bd_list, &sdp->sd_log_revokes);
 }
Signature · 1 line
2.25.1
author maintainer
#45 lore raw

PATCH 44/142 drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate

In reply to Greg Kroah-Hartman

From: Evan Quan <[email protected]>

[ Upstream commit 1fe48ec08d9f2e26d893a6c05bd6c99a3490f9ef ]

As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact, this unnecessary cancel_delayed_work_sync may leave a small time window for race condition and is dangerous.

---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c |  6 +-----
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c  | 12 +++---------
 2 files changed, 4 insertions(+), 14 deletions(-)
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +1 -5
index 14417cebe38b..6f118292e40f 100644
@@ -4290,11 +4290,7 @@ static int gfx_v10_0_set_powergating_state(void *handle,
 	switch (adev->asic_type) {
 	case CHIP_NAVI10:
 	case CHIP_NAVI14:
-		if (!enable) {
-			amdgpu_gfx_off_ctrl(adev, false);
-			cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work);
-		} else
-			amdgpu_gfx_off_ctrl(adev, true);
+		amdgpu_gfx_off_ctrl(adev, enable);
 		break;
 	default:
 		break;
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +3 -9
index c34ddaa65324..6004fdacc866 100644
@@ -4839,10 +4839,9 @@ static int gfx_v9_0_set_powergating_state(void *handle,
 	switch (adev->asic_type) {
 	case CHIP_RAVEN:
 	case CHIP_RENOIR:
-		if (!enable) {
+		if (!enable)
 			amdgpu_gfx_off_ctrl(adev, false);
-			cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work);
-		}
+
 		if (adev->pg_flags & AMD_PG_SUPPORT_RLC_SMU_HS) {
 			gfx_v9_0_enable_sck_slow_down_on_power_up(adev, true);
 			gfx_v9_0_enable_sck_slow_down_on_power_down(adev, true);
@@ -4868,12 +4867,7 @@ static int gfx_v9_0_set_powergating_state(void *handle,
 			amdgpu_gfx_off_ctrl(adev, true);
 		break;
 	case CHIP_VEGA12:
-		if (!enable) {
-			amdgpu_gfx_off_ctrl(adev, false);
-			cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work);
-		} else {
-			amdgpu_gfx_off_ctrl(adev, true);
-		}
+		amdgpu_gfx_off_ctrl(adev, enable);
 		break;
 	default:
 		break;
Signature · 1 line
2.25.1
author maintainer
#46 lore raw

PATCH 45/142 drm/amd/powerplay: perform PG ungate prior to CG ungate

In reply to Greg Kroah-Hartman

From: Evan Quan <[email protected]>

[ Upstream commit f4fcfa4282c1a1bf51475ebb0ffda623eebf1191 ]

Since gfxoff should be disabled first before trying to access those GC registers.

---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 +++---
 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c    | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/powerplay/amd_powerplay.c +3 -3
index 8bb5fbef7de0..9eb3a0dcd1f2 100644
@@ -320,12 +320,12 @@ static void pp_dpm_en_umd_pstate(struct pp_hwmgr  *hwmgr,
 		if (*level & profile_mode_mask) {
 			hwmgr->saved_dpm_level = hwmgr->dpm_level;
 			hwmgr->en_umd_pstate = true;
-			amdgpu_device_ip_set_clockgating_state(hwmgr->adev,
-						AMD_IP_BLOCK_TYPE_GFX,
-						AMD_CG_STATE_UNGATE);
 			amdgpu_device_ip_set_powergating_state(hwmgr->adev,
 					AMD_IP_BLOCK_TYPE_GFX,
 					AMD_PG_STATE_UNGATE);
+			amdgpu_device_ip_set_clockgating_state(hwmgr->adev,
+						AMD_IP_BLOCK_TYPE_GFX,
+						AMD_CG_STATE_UNGATE);
 		}
 	} else {
 		/* exit umd pstate, restore level, enable gfx cg*/
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +3 -3
index a066e9297777..b51a124e505a 100644
@@ -1541,12 +1541,12 @@ static int smu_enable_umd_pstate(void *handle,
 		if (*level & profile_mode_mask) {
 			smu_dpm_ctx->saved_dpm_level = smu_dpm_ctx->dpm_level;
 			smu_dpm_ctx->enable_umd_pstate = true;
-			amdgpu_device_ip_set_clockgating_state(smu->adev,
-							       AMD_IP_BLOCK_TYPE_GFX,
-							       AMD_CG_STATE_UNGATE);
 			amdgpu_device_ip_set_powergating_state(smu->adev,
 							       AMD_IP_BLOCK_TYPE_GFX,
 							       AMD_PG_STATE_UNGATE);
+			amdgpu_device_ip_set_clockgating_state(smu->adev,
+							       AMD_IP_BLOCK_TYPE_GFX,
+							       AMD_CG_STATE_UNGATE);
 		}
 	} else {
 		/* exit umd pstate, restore level, enable gfx cg*/
Signature · 1 line
2.25.1
author maintainer
#47 lore raw

PATCH 46/142 drm/amdgpu: Use GEM obj reference for KFD BOs

In reply to Greg Kroah-Hartman

From: Felix Kuehling <[email protected]>

[ Upstream commit 39b3128d7ffd44e400e581e6f49e88cb42bef9a1 ]

Releasing the AMDGPU BO ref directly leads to problems when BOs were exported as DMA bufs. Releasing the GEM reference makes sure that the AMDGPU/TTM BO is not freed too early.

Also take a GEM reference when importing BOs from DMABufs to keep references to imported BOs balances properly.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +3 -2
index 6d021ecc8d59..edb561baf8b9 100644
@@ -1288,7 +1288,7 @@ int amdgpu_amdkfd_gpuvm_free_memory_of_gpu(
 	}
 
 	/* Free the BO*/
-	amdgpu_bo_unref(&mem->bo);
+	drm_gem_object_put_unlocked(&mem->bo->tbo.base);
 	mutex_destroy(&mem->lock);
 	kfree(mem);
 
@@ -1630,7 +1630,8 @@ int amdgpu_amdkfd_gpuvm_import_dmabuf(struct kgd_dev *kgd,
 		AMDGPU_VM_PAGE_READABLE | AMDGPU_VM_PAGE_WRITEABLE |
 		AMDGPU_VM_PAGE_EXECUTABLE | AMDGPU_VM_MTYPE_NC;
 
-	(*mem)->bo = amdgpu_bo_ref(bo);
+	drm_gem_object_get(&bo->tbo.base);
+	(*mem)->bo = bo;
 	(*mem)->va = va;
 	(*mem)->domain = (bo->preferred_domains & AMDGPU_GEM_DOMAIN_VRAM) ?
 		AMDGPU_GEM_DOMAIN_VRAM : AMDGPU_GEM_DOMAIN_GTT;
Signature · 1 line
2.25.1
author maintainer
#48 lore raw

PATCH 47/142 cachefiles: Fix race between read_waiter and read_copier involving op->to_do

In reply to Greg Kroah-Hartman

From: Lei Xue <[email protected]>

[ Upstream commit 7bb0c5338436dae953622470d52689265867f032 ]

There is a potential race in fscache operation enqueuing for reading and copying multiple pages from cachefiles to netfs. The problem can be seen easily on a heavy loaded system (for example many processes reading files continually on an NFS share covered by fscache triggered this problem within a few minutes).

The race is due to cachefiles_read_waiter() adding the op to the monitor to_do list and then then drop the object->work_lock spinlock before completing fscache_enqueue_operation(). Once the lock is dropped, cachefiles_read_copier() grabs the op, completes processing it, and makes it through fscache_retrieval_complete() which sets the op->state to the final state of FSCACHE_OP_ST_COMPLETE(4). When cachefiles_read_waiter() finally gets through the remainder of fscache_enqueue_operation() it sees the invalid state, and hits the ASSERTCMP and the following oops is seen:

[ 2259.612361] FS-Cache:
[ 2259.614785] FS-Cache: Assertion failed
[ 2259.618639] FS-Cache: 4 == 5 is false
[ 2259.622456] ------------[ cut here ]------------
[ 2259.627190] kernel BUG at fs/fscache/operation.c:70!
...
[ 2259.791675] RIP: 0010:[<ffffffffc061b4cf>]  [<ffffffffc061b4cf>] fscache_enqueue_operation+0xff/0x170 [fscache]
[ 2259.802059] RSP: 0000:ffffa0263d543be0  EFLAGS: 00010046
[ 2259.807521] RAX: 0000000000000019 RBX: ffffa01a4d390480 RCX: 0000000000000006
[ 2259.814847] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffffa0263d553890
[ 2259.822176] RBP: ffffa0263d543be8 R08: 0000000000000000 R09: ffffa0263c2d8708
[ 2259.829502] R10: 0000000000001e7f R11: 0000000000000000 R12: ffffa01a4d390480
[ 2259.844483] R13: ffff9fa9546c5920 R14: ffffa0263d543c80 R15: ffffa0293ff9bf10
[ 2259.859554] FS:  00007f4b6efbd700(0000) GS:ffffa0263d540000(0000) knlGS:0000000000000000
[ 2259.875571] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2259.889117] CR2: 00007f49e1624ff0 CR3: 0000012b38b38000 CR4: 00000000007607e0
[ 2259.904015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2259.918764] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2259.933449] PKRU: 55555554
[ 2259.943654] Call Trace:
[ 2259.953592]  <IRQ>
[ 2259.955577]  [<ffffffffc03a7c12>] cachefiles_read_waiter+0x92/0xf0 [cachefiles]
[ 2259.978039]  [<ffffffffa34d3942>] __wake_up_common+0x82/0x120
[ 2259.991392]  [<ffffffffa34d3a63>] __wake_up_common_lock+0x83/0xc0
[ 2260.004930]  [<ffffffffa34d3510>] ? task_rq_unlock+0x20/0x20
[ 2260.017863]  [<ffffffffa34d3ab3>] __wake_up+0x13/0x20
[ 2260.030230]  [<ffffffffa34c72a0>] __wake_up_bit+0x50/0x70
[ 2260.042535]  [<ffffffffa35bdcdb>] unlock_page+0x2b/0x30
[ 2260.054495]  [<ffffffffa35bdd09>] page_endio+0x29/0x90
[ 2260.066184]  [<ffffffffa368fc81>] mpage_end_io+0x51/0x80

CPU1
cachefiles_read_waiter()
20 static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
21 int sync, void *_key)
22 {
...

 61         spin_lock(&object->work_lock);
 62         list_add_tail(&monitor->op_link, &op->to_do);
 63         spin_unlock(&object->work_lock);

<begin race window>
64
65 fscache_enqueue_retrieval(op);
182 static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op) 183 {
184 fscache_enqueue_operation(&op->op);
185 }
58 void fscache_enqueue_operation(struct fscache_operation *op) 59 {
60 struct fscache_cookie *cookie = op->object->cookie;
61
62 _enter("{OBJ%x OP%x,%u}",
63 op->object->debug_id, op->debug_id, atomic_read(&op->usage));
64

 65         ASSERT(list_empty(&op->pend_link));
 66         ASSERT(op->processor != NULL);
 67         ASSERT(fscache_object_is_available(op->object));
 68         ASSERTCMP(atomic_read(&op->usage), >, 0);

<end race window>

CPU2
cachefiles_read_copier()
168 while (!list_empty(&op->to_do)) {
...

202                 fscache_end_io(op, monitor->netfs_page, error);
203                 put_page(monitor->netfs_page);
204                 fscache_retrieval_complete(op, 1);

CPU1
58 void fscache_enqueue_operation(struct fscache_operation *op) 59 {
...
69 ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS,
70 op->state, ==, FSCACHE_OP_ST_CANCELLED);

---
 fs/cachefiles/rdwr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cachefiles/rdwr.c +1 -1
index 44a3ce1e4ce4..ad057ed2b30b 100644
@@ -60,9 +60,9 @@ static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
 	object = container_of(op->op.object, struct cachefiles_object, fscache);
 	spin_lock(&object->work_lock);
 	list_add_tail(&monitor->op_link, &op->to_do);
+	fscache_enqueue_retrieval(op);
 	spin_unlock(&object->work_lock);
 
-	fscache_enqueue_retrieval(op);
 	fscache_put_retrieval(op);
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#49 lore raw

PATCH 48/142 usb: dwc3: pci: Enable extcon driver for Intel Merrifield

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 066c09593454e89bc605ffdff1c9810061f9b1e1 ]

Intel Merrifield provides a DR support via PMIC which has its own extcon driver.

Add a property string to link to that driver.

---
 drivers/usb/dwc3/dwc3-pci.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/dwc3/dwc3-pci.c +1 -0
index 7051611229c9..b67372737dc9 100644
@@ -114,6 +114,7 @@ static const struct property_entry dwc3_pci_intel_properties[] = {
 
 static const struct property_entry dwc3_pci_mrfld_properties[] = {
 	PROPERTY_ENTRY_STRING("dr_mode", "otg"),
+	PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 	{}
 };
Signature · 1 line
2.25.1
author maintainer
#50 lore raw

PATCH 49/142 usb: phy: twl6030-usb: Fix a resource leak in an error handling path in twl6030_usb_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit f058764d19000d98aef72010468db1f69faf9fa0 ]

A call to 'regulator_get()' is hidden in 'twl6030_usb_ldo_init()'. A corresponding put must be performed in the error handling path, as already done in the remove function.

While at it, also move a 'free_irq()' call in the error handling path in order to be consistent.

---
 drivers/usb/phy/phy-twl6030-usb.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/usb/phy/phy-twl6030-usb.c +9 -3
index bfebf1f2e991..9a7e655d5280 100644
@@ -377,7 +377,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	if (status < 0) {
 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 			twl->irq1, status);
-		return status;
+		goto err_put_regulator;
 	}
 
 	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
@@ -386,8 +386,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	if (status < 0) {
 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 			twl->irq2, status);
-		free_irq(twl->irq1, twl);
-		return status;
+		goto err_free_irq1;
 	}
 
 	twl->asleep = 0;
@@ -396,6 +395,13 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 
 	return 0;
+
+err_free_irq1:
+	free_irq(twl->irq1, twl);
+err_put_regulator:
+	regulator_put(twl->usb3v3);
+
+	return status;
 }
 
 static int twl6030_usb_remove(struct platform_device *pdev)
Signature · 1 line
2.25.1
author maintainer
#51 lore raw

PATCH 50/142 usb: gadget: legacy: fix redundant initialization warnings

In reply to Greg Kroah-Hartman

From: Masahiro Yamada <[email protected]>

[ Upstream commit d13cce757954fa663c69845611957396843ed87a ]

Fix the following cppcheck warnings:

drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$

 value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized
 int    value = -EOPNOTSUPP;
              ^
drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten
 value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
 value = -EINVAL;
       ^
drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized
 ssize_t   value = len, length = len;
                 ^
drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten
 value = -EINVAL;
       ^
---
 drivers/usb/gadget/legacy/inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/usb/gadget/legacy/inode.c +1 -2
index b47938dff1a2..238f555fe494 100644
@@ -1361,7 +1361,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
 	req->buf = dev->rbuf;
 	req->context = NULL;
-	value = -EOPNOTSUPP;
 	switch (ctrl->bRequest) {
 
 	case USB_REQ_GET_DESCRIPTOR:
@@ -1784,7 +1783,7 @@ static ssize_t
 dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 {
 	struct dev_data		*dev = fd->private_data;
-	ssize_t			value = len, length = len;
+	ssize_t			value, length = len;
 	unsigned		total;
 	u32			tag;
 	char			*kbuf;
Signature · 1 line
2.25.1
author maintainer
#52 lore raw

PATCH 51/142 net: freescale: select CONFIG_FIXED_PHY where needed

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 99352c79af3e5f2e4724abf37fa5a2a3299b1c81 ]

I ran into a randconfig build failure with CONFIG_FIXED_PHY=m and CONFIG_GIANFAR=y:

x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier'

It seems the same thing can happen with dpaa and ucc_geth, so change all three to do an explicit 'select FIXED_PHY'.

The fixed-phy driver actually has an alternative stub function that theoretically allows building network drivers when fixed-phy is disabled, but I don't see how that would help here, as the drivers presumably would not work then.

---
 drivers/net/ethernet/freescale/Kconfig      | 2 ++
 drivers/net/ethernet/freescale/dpaa/Kconfig | 1 +
 2 files changed, 3 insertions(+)
drivers/net/ethernet/freescale/Kconfig +2 -0
index 6a7e8993119f..941c7e667afc 100644
@@ -77,6 +77,7 @@ config UCC_GETH
 	depends on QUICC_ENGINE
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	---help---
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 	  which is available on some Freescale SOCs.
@@ -90,6 +91,7 @@ config GIANFAR
 	depends on HAS_DMA
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	select CRC32
 	---help---
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
drivers/net/ethernet/freescale/dpaa/Kconfig +1 -0
index 3b325733a4f8..0a54c7e0e4ae 100644
@@ -3,6 +3,7 @@ menuconfig FSL_DPAA_ETH
 	tristate "DPAA Ethernet"
 	depends on FSL_DPAA && FSL_FMAN
 	select PHYLIB
+	select FIXED_PHY
 	select FSL_FMAN_MAC
 	---help---
 	  Data Path Acceleration Architecture Ethernet driver,
Signature · 1 line
2.25.1
author maintainer
#53 lore raw

PATCH 52/142 IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()

In reply to Greg Kroah-Hartman

From: Denis V. Lunev <[email protected]>

[ Upstream commit 856ec7f64688387b100b7083cdf480ce3ac41227 ]

Local variable netdev is not used in these calls.

It should be noted, that this change is required to work in bonded mode. Otherwise we would get the following assert:

"RTNL: assertion failed at net/core/dev.c (5665)"

With the calltrace as follows:

	dump_stack+0x19/0x1b
	netdev_master_upper_dev_get+0x61/0x70
	i40iw_addr_resolve_neigh+0x1e8/0x220
	i40iw_make_cm_node+0x296/0x700
	? i40iw_find_listener.isra.10+0xcc/0x110
	i40iw_receive_ilq+0x3d4/0x810
	i40iw_puda_poll_completion+0x341/0x420
	i40iw_process_ceq+0xa5/0x280
	i40iw_ceq_dpc+0x1e/0x40
	tasklet_action+0x83/0x140
	__do_softirq+0x125/0x2bb
	call_softirq+0x1c/0x30
	do_softirq+0x65/0xa0
	irq_exit+0x105/0x110
	do_IRQ+0x56/0xf0
	common_interrupt+0x16a/0x16a
	? cpuidle_enter_state+0x57/0xd0
	cpuidle_idle_call+0xde/0x230
	arch_cpu_idle+0xe/0xc0
	cpu_startup_entry+0x14a/0x1e0
	start_secondary+0x1f7/0x270
	start_cpu+0x5/0x14
---
 drivers/infiniband/hw/i40iw/i40iw_cm.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/infiniband/hw/i40iw/i40iw_cm.c +0 -8
index 2d6a378e8560..b1df93b69df4 100644
@@ -1987,7 +1987,6 @@ static int i40iw_addr_resolve_neigh(struct i40iw_device *iwdev,
 	struct rtable *rt;
 	struct neighbour *neigh;
 	int rc = arpindex;
-	struct net_device *netdev = iwdev->netdev;
 	__be32 dst_ipaddr = htonl(dst_ip);
 	__be32 src_ipaddr = htonl(src_ip);
 
@@ -1997,9 +1996,6 @@ static int i40iw_addr_resolve_neigh(struct i40iw_device *iwdev,
 		return rc;
 	}
 
-	if (netif_is_bond_slave(netdev))
-		netdev = netdev_master_upper_dev_get(netdev);
-
 	neigh = dst_neigh_lookup(&rt->dst, &dst_ipaddr);
 
 	rcu_read_lock();
@@ -2065,7 +2061,6 @@ static int i40iw_addr_resolve_neigh_ipv6(struct i40iw_device *iwdev,
 {
 	struct neighbour *neigh;
 	int rc = arpindex;
-	struct net_device *netdev = iwdev->netdev;
 	struct dst_entry *dst;
 	struct sockaddr_in6 dst_addr;
 	struct sockaddr_in6 src_addr;
@@ -2086,9 +2081,6 @@ static int i40iw_addr_resolve_neigh_ipv6(struct i40iw_device *iwdev,
 		return rc;
 	}
 
-	if (netif_is_bond_slave(netdev))
-		netdev = netdev_master_upper_dev_get(netdev);
-
 	neigh = dst_neigh_lookup(dst, dst_addr.sin6_addr.in6_u.u6_addr32);
 
 	rcu_read_lock();
Signature · 1 line
2.25.1
author maintainer
#54 lore raw

PATCH 53/142 riscv: stacktrace: Fix undefined reference to `walk_stackframe

In reply to Greg Kroah-Hartman

From: Kefeng Wang <[email protected]>

[ Upstream commit 0502bee37cdef755d63eee60236562e5605e2480 ]

Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'

---
 arch/riscv/kernel/stacktrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/stacktrace.c +1 -1
index 0940681d2f68..19e46f4160cc 100644
@@ -63,7 +63,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 
 #else /* !CONFIG_FRAME_POINTER */
 
-static void notrace walk_stackframe(struct task_struct *task,
+void notrace walk_stackframe(struct task_struct *task,
 	struct pt_regs *regs, bool (*fn)(unsigned long, void *), void *arg)
 {
 	unsigned long sp, pc;
Signature · 1 line
2.25.1
author maintainer
#55 lore raw

PATCH 54/142 clk: ti: am33xx: fix RTC clock parent

In reply to Greg Kroah-Hartman

From: Tero Kristo <[email protected]>

[ Upstream commit dc6dbd51009fc412729c307161f442c0a08618f4 ]

Right now, trying to use RTC purely with the ti-sysc / clkctrl framework fails to enable the RTC module properly. Based on experimentation, this appears to be because RTC is sourced from the clkdiv32k optional clock. TRM is not very clear on this topic, but fix the RTC to use the proper source clock nevertheless.

---
 drivers/clk/ti/clk-33xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/ti/clk-33xx.c +1 -1
index a360d3109555..73f567d8022f 100644
@@ -212,7 +212,7 @@ static const struct omap_clkctrl_reg_data am3_mpu_clkctrl_regs[] __initconst = {
 };
 
 static const struct omap_clkctrl_reg_data am3_l4_rtc_clkctrl_regs[] __initconst = {
-	{ AM3_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
+	{ AM3_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk-24mhz-clkctrl:0000:0" },
 	{ 0 },
 };
 
Signature · 1 line
2.25.1
author maintainer
#56 lore raw

PATCH 55/142 csky: Fixup msa highest 3 bits mask

In reply to Greg Kroah-Hartman

From: Liu Yibin <[email protected]>

[ Upstream commit 165f2d2858013253042809df082b8df7e34e86d7 ]

Just as comment mentioned, the msa format:

cr<30/31, 15> MSA register format:

 31 - 29 | 28 - 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0

BA Reserved SH WA B SO SEC C D V

So we should shift 29 bits not 28 bits for mask

---
 arch/csky/abiv1/inc/abi/entry.h | 4 ++--
 arch/csky/abiv2/inc/abi/entry.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/csky/abiv1/inc/abi/entry.h +2 -2
index 5056ebb902d1..61d94ec7dd16 100644
@@ -167,8 +167,8 @@
 	 *   BA     Reserved  C   D   V
 	 */
 	cprcr	r6, cpcr30
-	lsri	r6, 28
-	lsli	r6, 28
+	lsri	r6, 29
+	lsli	r6, 29
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 
arch/csky/abiv2/inc/abi/entry.h +2 -2
index 111973c6c713..9023828ede97 100644
@@ -225,8 +225,8 @@
 	 */
 	mfcr	r6, cr<30, 15> /* Get MSA0 */
 2:
-	lsri	r6, 28
-	lsli	r6, 28
+	lsri	r6, 29
+	lsli	r6, 29
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 
Signature · 1 line
2.25.1
author maintainer
#57 lore raw

PATCH 56/142 csky: Fixup perf callchain unwind

In reply to Greg Kroah-Hartman

From: Mao Han <[email protected]>

[ Upstream commit 229a0ddee1108a3f82a873e6cbbe35c92c540444 ]

 [ 5221.974084] Unable to handle kernel paging request at virtual address 0xfffff000, pc: 0x8002c18e
 [ 5221.985929] Oops: 00000000
 [ 5221.989488]
 [ 5221.989488] CURRENT PROCESS:
 [ 5221.989488]
 [ 5221.992877] COMM=callchain_test PID=11962
 [ 5221.995213] TEXT=00008000-000087e0 DATA=00009f1c-0000a018 BSS=0000a018-0000b000
 [ 5221.999037] USER-STACK=7fc18e20  KERNEL-STACK=be204680
 [ 5221.999037]
 [ 5222.003292] PC: 0x8002c18e (perf_callchain_kernel+0x3e/0xd4)
 [ 5222.007957] LR: 0x8002c198 (perf_callchain_kernel+0x48/0xd4)
 [ 5222.074873] Call Trace:
 [ 5222.074873] [<800a248e>] get_perf_callchain+0x20a/0x29c
 [ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80
 [ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8
 [ 5222.074873] [<8009de6e>] perf_event_output_forward+0x36/0x98
 [ 5222.074873] [<800497e0>] search_exception_tables+0x20/0x44
 [ 5222.074873] [<8002cbb6>] do_page_fault+0x92/0x378
 [ 5222.074873] [<80098608>] __perf_event_overflow+0x54/0xdc
 [ 5222.074873] [<80098778>] perf_swevent_hrtimer+0xe8/0x164
 [ 5222.074873] [<8002ddd0>] update_mmu_cache+0x0/0xd8
 [ 5222.074873] [<8002c014>] user_backtrace+0x58/0xc4
 [ 5222.074873] [<8002c0b4>] perf_callchain_user+0x34/0xd0
 [ 5222.074873] [<800a2442>] get_perf_callchain+0x1be/0x29c
 [ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80
 [ 5222.074873] [<8009d834>] perf_output_sample+0x78c/0x858
 [ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8
 [ 5222.074873] [<8009de94>] perf_event_output_forward+0x5c/0x98
 [ 5222.097846]
 [ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c
 [ 5222.097846] [<8006c874>] hrtimer_interrupt+0x104/0x2ec
 [ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c
 [ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c
 [ 5222.097846] [<8006c770>] hrtimer_interrupt+0x0/0x2ec
 [ 5222.097846] [<8005f2e4>] __handle_irq_event_percpu+0xac/0x19c
 [ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c
 [ 5222.097846] [<8005f408>] handle_irq_event_percpu+0x34/0x88
 [ 5222.097846] [<8005f480>] handle_irq_event+0x24/0x64
 [ 5222.097846] [<8006218c>] handle_level_irq+0x68/0xdc
 [ 5222.097846] [<8005ec76>] __handle_domain_irq+0x56/0xa8
 [ 5222.097846] [<80450e90>] ck_irq_handler+0xac/0xe4
 [ 5222.097846] [<80029012>] csky_do_IRQ+0x12/0x24
 [ 5222.097846] [<8002a3a0>] csky_irq+0x70/0x80
 [ 5222.097846] [<800ca612>] alloc_set_pte+0xd2/0x238
 [ 5222.097846] [<8002ddd0>] update_mmu_cache+0x0/0xd8
 [ 5222.097846] [<800a0340>] perf_event_exit_task+0x98/0x43c

The original fp check doesn't base on the real kernal stack region. Invalid fp address may cause kernel panic.

---
 arch/csky/kernel/perf_callchain.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
arch/csky/kernel/perf_callchain.c +7 -2
index e68ff375c8f8..ab55e98ee8f6 100644
@@ -12,12 +12,17 @@ struct stackframe {
 
 static int unwind_frame_kernel(struct stackframe *frame)
 {
-	if (kstack_end((void *)frame->fp))
+	unsigned long low = (unsigned long)task_stack_page(current);
+	unsigned long high = low + THREAD_SIZE;
+
+	if (unlikely(frame->fp < low || frame->fp > high))
 		return -EPERM;
-	if (frame->fp & 0x3 || frame->fp < TASK_SIZE)
+
+	if (kstack_end((void *)frame->fp) || frame->fp & 0x3)
 		return -EPERM;
 
 	*frame = *(struct stackframe *)frame->fp;
+
 	if (__kernel_text_address(frame->lr)) {
 		int graph = 0;
 
Signature · 1 line
2.25.1
author maintainer
#58 lore raw

PATCH 57/142 csky: Fixup remove duplicate irq_disable

In reply to Greg Kroah-Hartman

From: Liu Yibin <[email protected]>

[ Upstream commit 6633a5aa8eb6bda70eb3a9837efd28a67ccc6e0a ]

Interrupt has been disabled in __schedule() with local_irq_disable() and enabled in finish_task_switch->finish_lock_switch() with local_irq_enabled(), So needn't to disable irq here.

---
 arch/csky/kernel/entry.S | 2 --
 1 file changed, 2 deletions(-)
arch/csky/kernel/entry.S +0 -2
index a7a5b67df898..65c55f22532a 100644
@@ -318,8 +318,6 @@ ENTRY(__switch_to)
 
 	mfcr	a2, psr			/* Save PSR value */
 	stw	a2, (a3, THREAD_SR)	/* Save PSR in task struct */
-	bclri	a2, 6			/* Disable interrupts */
-	mtcr	a2, psr
 
 	SAVE_SWITCH_STACK
 
Signature · 1 line
2.25.1
author maintainer
#59 lore raw

PATCH 58/142 hwmon: (nct7904) Fix incorrect range of temperature limit registers

In reply to Greg Kroah-Hartman

From: Amy Shih <[email protected]>

[ Upstream commit 7b2fd270af27edaf02acb41a7babe805a9441914 ]

The format of temperature limitation registers are 8-bit 2's complement and the range is -128~127.
Converts the reading value to signed char to fix the incorrect range of temperature limitation registers.

---
 drivers/hwmon/nct7904.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/hwmon/nct7904.c +3 -1
index 281c81edabc6..dfb122b5e1b7 100644
@@ -356,6 +356,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
 	struct nct7904_data *data = dev_get_drvdata(dev);
 	int ret, temp;
 	unsigned int reg1, reg2, reg3;
+	s8 temps;
 
 	switch (attr) {
 	case hwmon_temp_input:
@@ -461,7 +462,8 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
 
 	if (ret < 0)
 		return ret;
-	*val = ret * 1000;
+	temps = ret;
+	*val = temps * 1000;
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#60 lore raw

PATCH 59/142 cifs: Fix null pointer check in cifs_read

In reply to Greg Kroah-Hartman

From: Steve French <[email protected]>

[ Upstream commit 9bd21d4b1a767c3abebec203342f3820dcb84662 ]

Coverity scan noted a redundant null check

Coverity-id: 728517

---
 fs/cifs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/file.c +1 -1
index b095094c0842..4959dbe740f7 100644
@@ -3997,7 +3997,7 @@ cifs_read(struct file *file, char *read_data, size_t read_size, loff_t *offset)
 			 * than it negotiated since it will refuse the read
 			 * then.
 			 */
-			if ((tcon->ses) && !(tcon->ses->capabilities &
+			if (!(tcon->ses->capabilities &
 				tcon->ses->server->vals->cap_large_files)) {
 				current_read_size = min_t(uint,
 					current_read_size, CIFSMaxBufSize);
Signature · 1 line
2.25.1
author maintainer
#61 lore raw

PATCH 60/142 csky: Fixup raw_copy_from_user()

In reply to Greg Kroah-Hartman

From: Al Viro <[email protected]>

[ Upstream commit 51bb38cb78363fdad1f89e87357b7bc73e39ba88 ]

If raw_copy_from_user(to, from, N) returns K, callers expect the first N - K bytes starting at to to have been replaced with the contents of corresponding area starting at from and the last K bytes of destination *left* *unmodified*.

What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g. data corruption on write(2).

raw_copy_to_user() is inaccurate about return value, which is a bug, but consequences are less drastic than for raw_copy_from_user(). And just what are those access_ok() doing in there? I mean, look into linux/uaccess.h; that's where we do that check (as well as zero tail on failure in the callers that need zeroing).

AFAICS, all of that shouldn't be hard to fix; something like a patch below might make a useful starting point.

I would suggest moving these macros into usercopy.c (they are never used anywhere else) and possibly expanding them there; if you leave them alive, please at least rename __copy_user_zeroing(). Again, it must not zero anything on failed read.

Said that, I'm not sure we won't be better off simply turning usercopy.c into usercopy.S - all that is left there is a couple of functions, each consisting only of inline asm.

Guo Ren reply:

Yes, raw_copy_from_user is wrong, it's no need zeroing code.

unsigned long _copy_from_user(void *to, const void __user *from, unsigned long n)

{
        unsigned long res = n;
        might_fault();
        if (likely(access_ok(from, n))) {
                kasan_check_write(to, n);
                res = raw_copy_from_user(to, from, n);
        }
        if (unlikely(res))
                memset(to + (n - res), 0, res);
        return res;
}

EXPORT_SYMBOL(_copy_from_user);

You are right and access_ok() should be removed.

but, how about:
do {
...

        "2:     stw     %3, (%1, 0)     \n"             \
+       "       subi    %0, 4          \n"               \
        "9:     stw     %4, (%1, 4)     \n"             \
+       "       subi    %0, 4          \n"               \
        "10:    stw     %5, (%1, 8)     \n"             \
+       "       subi    %0, 4          \n"               \
        "11:    stw     %6, (%1, 12)    \n"             \
+       "       subi    %0, 4          \n"               \
        "       addi    %2, 16          \n"             \
        "       addi    %1, 16          \n"             \

Don't expand __ex_table

AI Viro reply:

Hey, I've no idea about the instruction scheduling on csky - if that doesn't slow the things down, all the better. It's just that copy_to_user() and friends are on fairly hot codepaths, and in quite a few situations they will dominate the speed of e.g. read(2). So I tried to keep the fast path unchanged. Up to the architecture maintainers, obviously. Which would be you...

As for the fixups size increase (__ex_table size is unchanged)... You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity would be, if it is, in fact, useless; the size... not really, especially since those extra subi will at least offset it.

Again, up to you - asm optimizations of (essentially) memcpy()-style loops are tricky and can depend upon the fairly subtle details of architecture. So even on something I know reasonably well I would resort to direct experiments if I can't pass the buck to architecture maintainers.

It *is* worth optimizing - this is where read() from a file that is already in page cache spends most of the time, etc.

Guo Ren reply:

Thx, after fixup some typo “sub %0, 4”, apply the patch.

TODO:
- user copy/from codes are still need optimizing.

---
 arch/csky/include/asm/uaccess.h | 49 +++++++++++++++++----------------
 arch/csky/lib/usercopy.c        |  8 ++----
 2 files changed, 28 insertions(+), 29 deletions(-)
arch/csky/include/asm/uaccess.h +26 -23
index eaa1c3403a42..60f8a4112588 100644
@@ -254,7 +254,7 @@ do {								\
 
 extern int __get_user_bad(void);
 
-#define __copy_user(to, from, n)			\
+#define ___copy_to_user(to, from, n)			\
 do {							\
 	int w0, w1, w2, w3;				\
 	asm volatile(					\
@@ -289,31 +289,34 @@ do {							\
 	"       subi    %0, 4           \n"		\
 	"       br      3b              \n"		\
 	"5:     cmpnei  %0, 0           \n"  /* 1B */   \
-	"       bf      8f              \n"		\
+	"       bf      13f             \n"		\
 	"       ldb     %3, (%2, 0)     \n"		\
 	"6:     stb     %3, (%1, 0)     \n"		\
 	"       addi    %2,  1          \n"		\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"7:     br      8f              \n"		\
+	"7:     subi	%0,  4          \n"		\
+	"8:     subi	%0,  4          \n"		\
+	"12:    subi	%0,  4          \n"		\
+	"       br      13f             \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 7b                \n"		\
-	".long    9b, 7b                \n"		\
-	".long   10b, 7b                \n"		\
+	".long    2b, 13f               \n"		\
+	".long    4b, 13f               \n"		\
+	".long    6b, 13f               \n"		\
+	".long    9b, 12b               \n"		\
+	".long   10b, 8b                \n"		\
 	".long   11b, 7b                \n"		\
-	".long    4b, 7b                \n"		\
-	".long    6b, 7b                \n"		\
 	".previous                      \n"		\
-	"8:                             \n"		\
+	"13:                            \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(w0),	\
 	  "=r"(w1), "=r"(w2), "=r"(w3)			\
 	: "0"(n), "1"(to), "2"(from)			\
 	: "memory");					\
 } while (0)
 
-#define __copy_user_zeroing(to, from, n)		\
+#define ___copy_from_user(to, from, n)			\
 do {							\
 	int tmp;					\
 	int nsave;					\
@@ -356,22 +359,22 @@ do {							\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"8:     mov     %3, %0          \n"		\
-	"       movi    %4, 0           \n"		\
-	"9:     stb     %4, (%1, 0)     \n"		\
-	"       addi    %1, 1           \n"		\
-	"       subi    %3, 1           \n"		\
-	"       cmpnei  %3, 0           \n"		\
-	"       bt      9b              \n"		\
-	"       br      7f              \n"		\
+	"8:     stw     %3, (%1, 0)     \n"		\
+	"       subi    %0, 4           \n"		\
+	"       bf      7f              \n"		\
+	"9:     subi    %0, 8           \n"		\
+	"       bf      7f              \n"		\
+	"13:    stw     %3, (%1, 8)     \n"		\
+	"       subi    %0, 12          \n"		\
+	"       bf      7f              \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 8b                \n"		\
+	".long    2b, 7f                \n"		\
+	".long    4b, 7f                \n"		\
+	".long    6b, 7f                \n"		\
 	".long   10b, 8b                \n"		\
-	".long   11b, 8b                \n"		\
-	".long   12b, 8b                \n"		\
-	".long    4b, 8b                \n"		\
-	".long    6b, 8b                \n"		\
+	".long   11b, 9b                \n"		\
+	".long   12b,13b                \n"		\
 	".previous                      \n"		\
 	"7:                             \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(nsave),	\
arch/csky/lib/usercopy.c +2 -6
index 647a23986fb5..3c9bd645e643 100644
@@ -7,10 +7,7 @@
 unsigned long raw_copy_from_user(void *to, const void *from,
 			unsigned long n)
 {
-	if (access_ok(from, n))
-		__copy_user_zeroing(to, from, n);
-	else
-		memset(to, 0, n);
+	___copy_from_user(to, from, n);
 	return n;
 }
 EXPORT_SYMBOL(raw_copy_from_user);
@@ -18,8 +15,7 @@ EXPORT_SYMBOL(raw_copy_from_user);
 unsigned long raw_copy_to_user(void *to, const void *from,
 			unsigned long n)
 {
-	if (access_ok(to, n))
-		__copy_user(to, from, n);
+	___copy_to_user(to, from, n);
 	return n;
 }
 EXPORT_SYMBOL(raw_copy_to_user);
Signature · 1 line
2.25.1
author maintainer
#62 lore raw

PATCH 61/142 samples: bpf: Fix build error

In reply to Greg Kroah-Hartman

From: Matteo Croce <[email protected]>

[ Upstream commit 23ad04669f81f958e9a4121b0266228d2eb3c357 ]

GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains a symbol which clashes with libbpf:

/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status

bpf_log_buf here seems to be a leftover, so removing it.

---
 samples/bpf/lwt_len_hist_user.c | 2 --
 1 file changed, 2 deletions(-)
samples/bpf/lwt_len_hist_user.c +0 -2
index 587b68b1f8dd..430a4b7e353e 100644
@@ -15,8 +15,6 @@
 #define MAX_INDEX 64
 #define MAX_STARS 38
 
-char bpf_log_buf[BPF_LOG_BUF_SIZE];
-
 static void stars(char *str, long val, long max, int width)
 {
 	int i;
Signature · 1 line
2.25.1
author maintainer
#63 lore raw

PATCH 62/142 drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c

In reply to Greg Kroah-Hartman

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit 95f59bf88bb75281cc626e283ecefdd5d5641427 ]

This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!

Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().

---
 drivers/net/hamradio/bpqether.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/hamradio/bpqether.c +2 -1
index fbea6f232819..e2ad3c2e8df5 100644
@@ -127,7 +127,8 @@ static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev)
 {
 	struct bpqdev *bpq;
 
-	list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) {
+	list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list,
+				lockdep_rtnl_is_held()) {
 		if (bpq->ethdev == dev)
 			return bpq->axdev;
 	}
Signature · 1 line
2.25.1
author maintainer
#64 lore raw

PATCH 63/142 Input: usbtouchscreen - add support for BonXeon TP

In reply to Greg Kroah-Hartman

From: James Hilliard <[email protected]>

[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ]

Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have.

---
 drivers/input/touchscreen/usbtouchscreen.c | 1 +
 1 file changed, 1 insertion(+)
drivers/input/touchscreen/usbtouchscreen.c +1 -0
index 16d70201de4a..397cb1d3f481 100644
@@ -182,6 +182,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	{USB_DEVICE(0x255e, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
Signature · 1 line
2.25.1
author maintainer
#65 lore raw

PATCH 64/142 Input: i8042 - add ThinkPad S230u to i8042 nomux list

In reply to Greg Kroah-Hartman

From: Kevin Locke <[email protected]>

[ Upstream commit 18931506465a762ffd3f4803d36a18d336a67da9 ]

On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", whether booted in UEFI or Legacy/CSM mode the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring on BIOS 1.57 and later.[1][2][3][4][5]

This model does not have an external PS/2 port, so mux does not appear to be useful.

Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient.

Adding 33474HU to the nomux list avoids the issue on my system.

[1]: https://bugs.launchpad.net/bugs/1210748
[2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425
[3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200
[4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115
[5]: https://forums.lenovo.com/topic/findpost/27/1337119
[BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt

---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/input/serio/i8042-x86ia64io.h +7 -0
index 08e919dbeb5d..5bbc9152731d 100644
@@ -541,6 +541,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
 		},
 	},
+	{
+		/* Lenovo ThinkPad Twist S230u */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
+		},
+	},
 	{ }
 };
 
Signature · 1 line
2.25.1
author maintainer
#66 lore raw

PATCH 65/142 Input: evdev - call input_flush_device() on release(), not flush()

In reply to Greg Kroah-Hartman

From: Brendan Shanks <[email protected]>

[ Upstream commit 09264098ff153f60866039d60b31d39b66f55a31 ]

input_flush_device() should only be called once the struct file is being released and no open descriptors remain, but evdev_flush() was calling it whenever a file descriptor was closed.

This caused uploaded force-feedback effects to be erased when a process did a dup()/close() on the event FD, called system(), etc.

Call input_flush_device() from evdev_release() instead.

---
 drivers/input/evdev.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/input/evdev.c +4 -15
index cb6e3a5f509c..0d57e51b8ba1 100644
@@ -326,20 +326,6 @@ static int evdev_fasync(int fd, struct file *file, int on)
 	return fasync_helper(fd, file, on, &client->fasync);
 }
 
-static int evdev_flush(struct file *file, fl_owner_t id)
-{
-	struct evdev_client *client = file->private_data;
-	struct evdev *evdev = client->evdev;
-
-	mutex_lock(&evdev->mutex);
-
-	if (evdev->exist && !client->revoked)
-		input_flush_device(&evdev->handle, file);
-
-	mutex_unlock(&evdev->mutex);
-	return 0;
-}
-
 static void evdev_free(struct device *dev)
 {
 	struct evdev *evdev = container_of(dev, struct evdev, dev);
@@ -453,6 +439,10 @@ static int evdev_release(struct inode *inode, struct file *file)
 	unsigned int i;
 
 	mutex_lock(&evdev->mutex);
+
+	if (evdev->exist && !client->revoked)
+		input_flush_device(&evdev->handle, file);
+
 	evdev_ungrab(evdev, client);
 	mutex_unlock(&evdev->mutex);
 
@@ -1310,7 +1300,6 @@ static const struct file_operations evdev_fops = {
 	.compat_ioctl	= evdev_ioctl_compat,
 #endif
 	.fasync		= evdev_fasync,
-	.flush		= evdev_flush,
 	.llseek		= no_llseek,
 };
 
Signature · 1 line
2.25.1
author maintainer
#67 lore raw

PATCH 66/142 Input: xpad - add custom init packet for Xbox One S controllers

In reply to Greg Kroah-Hartman

From: Łukasz Patron <[email protected]>

[ Upstream commit 764f7f911bf72450c51eb74cbb262ad9933741d8 ]

Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs.

---
 drivers/input/joystick/xpad.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/input/joystick/xpad.c +12 -0
index 6b40a1c68f9f..c77cdb3b62b5 100644
@@ -458,6 +458,16 @@ static const u8 xboxone_fw2015_init[] = {
 	0x05, 0x20, 0x00, 0x01, 0x00
 };
 
+/*
+ * This packet is required for Xbox One S (0x045e:0x02ea)
+ * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to
+ * initialize the controller that was previously used in
+ * Bluetooth mode.
+ */
+static const u8 xboxone_s_init[] = {
+	0x05, 0x20, 0x00, 0x0f, 0x06
+};
+
 /*
  * This packet is required for the Titanfall 2 Xbox One pads
  * (0x0e6f:0x0165) to finish initialization and for Hori pads
@@ -516,6 +526,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
 	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+	XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init),
+	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
Signature · 1 line
2.25.1
author maintainer
#68 lore raw

PATCH 67/142 Input: dlink-dir685-touchkeys - fix a typo in driver name

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 38347374ae3f1ec4df56dd688bd603a64e79a0ed ]

According to the file name and Kconfig, a 'k' is missing in this driver name. It should be "dlink-dir685-touchkeys".

---
 drivers/input/keyboard/dlink-dir685-touchkeys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/keyboard/dlink-dir685-touchkeys.c +1 -1
index b0ead7199c40..a69dcc3bd30c 100644
@@ -143,7 +143,7 @@ MODULE_DEVICE_TABLE(of, dir685_tk_of_match);
 
 static struct i2c_driver dir685_tk_i2c_driver = {
 	.driver = {
-		.name	= "dlin-dir685-touchkeys",
+		.name	= "dlink-dir685-touchkeys",
 		.of_match_table = of_match_ptr(dir685_tk_of_match),
 	},
 	.probe		= dir685_tk_probe,
Signature · 1 line
2.25.1
author maintainer
#69 lore raw

PATCH 68/142 Input: i8042 - add ThinkPad S230u to i8042 reset list

In reply to Greg Kroah-Hartman

From: Kevin Locke <[email protected]>

[ Upstream commit 2712c91a54a1058d55c284152b4d93c979b67be6 ]

On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5]

Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient.

Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot.

[1]: https://bugs.launchpad.net/bugs/1210748
[2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425
[3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200
[4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115
[5]: https://forums.lenovo.com/topic/findpost/27/1337119
[BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt

---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/input/serio/i8042-x86ia64io.h +7 -0
index 5bbc9152731d..c47800176534 100644
@@ -669,6 +669,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
 		},
 	},
+	{
+		/* Lenovo ThinkPad Twist S230u */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
+		},
+	},
 	{ }
 };
 
Signature · 1 line
2.25.1
author maintainer
#70 lore raw

PATCH 69/142 Input: synaptics-rmi4 - really fix attn_data use-after-free

In reply to Greg Kroah-Hartman

From: Evan Green <[email protected]>

[ Upstream commit d5a5e5b5fa7b86c05bf073acc0ba98fa280174ec ]

Fix a use-after-free noticed by running with KASAN enabled. If rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among others) will end up reading from drvdata->attn_data.data, which was freed and left dangling in rmi_irq_fn().

Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") correctly identified and analyzed this bug. However the attempted fix only NULLed out a local variable, missing the fact that drvdata->attn_data is a struct, not a pointer.

NULL out the correct pointer in the driver data to prevent the attention functions from copying from it.

Fixes 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN")
Fixes b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data")
---
 drivers/input/rmi4/rmi_driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/rmi4/rmi_driver.c +1 -1
index 190b9974526b..c18e1a25bca6 100644
@@ -205,7 +205,7 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
 
 	if (count) {
 		kfree(attn_data.data);
-		attn_data.data = NULL;
+		drvdata->attn_data.data = NULL;
 	}
 
 	if (!kfifo_is_empty(&drvdata->attn_fifo))
Signature · 1 line
2.25.1
author maintainer
#71 lore raw

PATCH 70/142 Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

[ Upstream commit 5caab2da63207d6d631007f592f5219459e3454d ]

Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function.

---
 drivers/input/rmi4/rmi_driver.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/input/rmi4/rmi_driver.c +2 -1
index c18e1a25bca6..258d5fe3d395 100644
@@ -1210,7 +1210,8 @@ static int rmi_driver_probe(struct device *dev)
 	if (data->input) {
 		rmi_driver_set_input_name(rmi_dev, data->input);
 		if (!rmi_dev->xport->input) {
-			if (input_register_device(data->input)) {
+			retval = input_register_device(data->input);
+			if (retval) {
 				dev_err(dev, "%s: Failed to register input device.\n",
 					__func__);
 				goto err_destroy_functions;
Signature · 1 line
2.25.1
author maintainer
#72 lore raw

PATCH 71/142 ARM: 8970/1: decompressor: increase tag size

In reply to Greg Kroah-Hartman

From: Łukasz Stelmach <[email protected]>

[ Upstream commit 2c962369d72f286659e6446919f88d69b943cb4d ]

The size field of the tag header structure is supposed to be set to the size of a tag structure including the header.

Fixes c772568788b5f0 ("ARM: add additional table to compressed kernel")
---
 arch/arm/boot/compressed/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/compressed/vmlinux.lds.S +1 -1
index fc7ed03d8b93..51b078604978 100644
@@ -43,7 +43,7 @@ SECTIONS
   }
   .table : ALIGN(4) {
     _table_start = .;
-    LONG(ZIMAGE_MAGIC(2))
+    LONG(ZIMAGE_MAGIC(4))
     LONG(ZIMAGE_MAGIC(0x5a534c4b))
     LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
     LONG(ZIMAGE_MAGIC(_kernel_bss_size))
Signature · 1 line
2.25.1
author maintainer
#73 lore raw

PATCH 72/142 ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 747ffc2fcf969eff9309d7f2d1d61cb8b9e1bb40 ]

Consolidate the user access assembly code to asm/uaccess-asm.h. This moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable, uaccess_disable, uaccess_save, uaccess_restore macros, and creates two new ones for exception entry and exit - uaccess_entry and uaccess_exit.

This makes the uaccess_save and uaccess_restore macros private to asm/uaccess-asm.h.

---
 arch/arm/include/asm/assembler.h   |  75 +-------------------
 arch/arm/include/asm/uaccess-asm.h | 106 +++++++++++++++++++++++++++++
 arch/arm/kernel/entry-armv.S       |  11 +--
 arch/arm/kernel/entry-header.S     |   9 +--
 4 files changed, 112 insertions(+), 89 deletions(-)
 create mode 100644 arch/arm/include/asm/uaccess-asm.h
arch/arm/include/asm/assembler.h +1 -74
index 99929122dad7..3546d294d55f 100644
@@ -18,11 +18,11 @@
 #endif
 
 #include <asm/ptrace.h>
-#include <asm/domain.h>
 #include <asm/opcodes-virt.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
 
 #define IOMEM(x)	(x)
 
@@ -446,79 +446,6 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.size \name , . - \name
 	.endm
 
-	.macro	csdb
-#ifdef CONFIG_THUMB2_KERNEL
-	.inst.w	0xf3af8014
-#else
-	.inst	0xe320f014
-#endif
-	.endm
-
-	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
-#ifndef CONFIG_CPU_USE_DOMAINS
-	adds	\tmp, \addr, #\size - 1
-	sbcscc	\tmp, \tmp, \limit
-	bcs	\bad
-#ifdef CONFIG_CPU_SPECTRE
-	movcs	\addr, #0
-	csdb
-#endif
-#endif
-	.endm
-
-	.macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req
-#ifdef CONFIG_CPU_SPECTRE
-	sub	\tmp, \limit, #1
-	subs	\tmp, \tmp, \addr	@ tmp = limit - 1 - addr
-	addhs	\tmp, \tmp, #1		@ if (tmp >= 0) {
-	subshs	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
-	movlo	\addr, #0		@ if (tmp < 0) addr = NULL
-	csdb
-#endif
-	.endm
-
-	.macro	uaccess_disable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	/*
-	 * Whenever we re-enter userspace, the domains should always be
-	 * set appropriately.
-	 */
-	mov	\tmp, #DACR_UACCESS_DISABLE
-	mcr	p15, 0, \tmp, c3, c0, 0		@ Set domain register
-	.if	\isb
-	instr_sync
-	.endif
-#endif
-	.endm
-
-	.macro	uaccess_enable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	/*
-	 * Whenever we re-enter userspace, the domains should always be
-	 * set appropriately.
-	 */
-	mov	\tmp, #DACR_UACCESS_ENABLE
-	mcr	p15, 0, \tmp, c3, c0, 0
-	.if	\isb
-	instr_sync
-	.endif
-#endif
-	.endm
-
-	.macro	uaccess_save, tmp
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	mrc	p15, 0, \tmp, c3, c0, 0
-	str	\tmp, [sp, #SVC_DACR]
-#endif
-	.endm
-
-	.macro	uaccess_restore
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	ldr	r0, [sp, #SVC_DACR]
-	mcr	p15, 0, r0, c3, c0, 0
-#endif
-	.endm
-
 	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
 	.macro	ret\c, reg
 #if __LINUX_ARM_ARCH__ < 6
arch/arm/include/asm/uaccess-asm.h new file +106 -0

106 lines not on this page · raw message

arch/arm/kernel/entry-armv.S +2 -9
index 858d4e541532..a874b753397e 100644
@@ -27,6 +27,7 @@
 #include <asm/unistd.h>
 #include <asm/tls.h>
 #include <asm/system_info.h>
+#include <asm/uaccess-asm.h>
 
 #include "entry-header.S"
 #include <asm/entry-macro-multi.S>
@@ -179,15 +180,7 @@ ENDPROC(__und_invalid)
 	stmia	r7, {r2 - r6}
 
 	get_thread_info tsk
-	ldr	r0, [tsk, #TI_ADDR_LIMIT]
-	mov	r1, #TASK_SIZE
-	str	r1, [tsk, #TI_ADDR_LIMIT]
-	str	r0, [sp, #SVC_ADDR_LIMIT]
-
-	uaccess_save r0
-	.if \uaccess
-	uaccess_disable r0
-	.endif
+	uaccess_entry tsk, r0, r1, r2, \uaccess
 
 	.if \trace
 #ifdef CONFIG_TRACE_IRQFLAGS
arch/arm/kernel/entry-header.S +3 -6
index 32051ec5b33f..40db0f9188b6 100644
@@ -6,6 +6,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/errno.h>
 #include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
 #include <asm/v7m.h>
 
 @ Bad Abort numbers
@@ -217,9 +218,7 @@
 	blne	trace_hardirqs_off
 #endif
 	.endif
-	ldr	r1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
-	str	r1, [tsk, #TI_ADDR_LIMIT]
+	uaccess_exit tsk, r0, r1
 
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode SVC restore
@@ -263,9 +262,7 @@
 	@ on the stack remains correct).
 	@
 	.macro  svc_exit_via_fiq
-	ldr	r1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
-	str	r1, [tsk, #TI_ADDR_LIMIT]
+	uaccess_exit tsk, r0, r1
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode restore
 	mov	r0, sp
Signature · 1 line
2.25.1
author maintainer
#74 lore raw

PATCH 73/142 ARM: uaccess: integrate uaccess_save and uaccess_restore

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 8ede890b0bcebe8c760aacfe20e934d98c3dc6aa ]

Integrate uaccess_save / uaccess_restore macros into the new uaccess_entry / uaccess_exit macros respectively.

---
 arch/arm/include/asm/uaccess-asm.h | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)
arch/arm/include/asm/uaccess-asm.h +13 -17
index d475e3e8145d..e46468b91eaa 100644
@@ -67,30 +67,23 @@
 #endif
 	.endm
 
-	.macro	uaccess_save, tmp
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	mrc	p15, 0, \tmp, c3, c0, 0
-	str	\tmp, [sp, #SVC_DACR]
-#endif
-	.endm
-
-	.macro	uaccess_restore
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	ldr	r0, [sp, #SVC_DACR]
-	mcr	p15, 0, r0, c3, c0, 0
+#define DACR(x...)	x
+#else
+#define DACR(x...)
 #endif
-	.endm
 
 	/*
 	 * Save the address limit on entry to a privileged exception and
 	 * if using PAN, save and disable usermode access.
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
-	ldr	\tmp0, [\tsk, #TI_ADDR_LIMIT]
-	mov	\tmp1, #TASK_SIZE
-	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
-	str	\tmp0, [sp, #SVC_ADDR_LIMIT]
-	uaccess_save \tmp0
+	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+	mov	\tmp2, #TASK_SIZE
+	str	\tmp2, [\tsk, #TI_ADDR_LIMIT]
+ DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
+ DACR(	str	\tmp0, [sp, #SVC_DACR])
+	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
 	.if \disable
 	uaccess_disable \tmp0
 	.endif
@@ -99,8 +92,11 @@
 	/* Restore the user access state previously saved by uaccess_entry */
 	.macro	uaccess_exit, tsk, tmp0, tmp1
 	ldr	\tmp1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
+ DACR(	ldr	\tmp0, [sp, #SVC_DACR])
 	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+ DACR(	mcr	p15, 0, \tmp0, c3, c0, 0)
 	.endm
 
+#undef DACR
+
 #endif /* __ASM_UACCESS_ASM_H__ */
Signature · 1 line
2.25.1
author maintainer
#75 lore raw

PATCH 74/142 ARM: uaccess: fix DACR mismatch with nested exceptions

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 71f8af1110101facfad68989ff91f88f8e2c3e22 ]

Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ) fails to fix up alignment faults, eventually resulting in a kernel oops.

The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit e6978e4bf181 ("ARM: save and reset the address limit when entering an exception"). This is because the address limit is set back to TASK_SIZE on exception entry, and, although it is restored on exception exit, the domain register is not.

Hence, this sequence can occur:

interrupt

    pt_regs->addr_limit = addr_limit		// USER_DS
    addr_limit = USER_DS
    alignment exception
    __probe_kernel_read()
      old_fs = get_fs()				// USER_DS
      set_fs(KERNEL_DS)
        addr_limit = KERNEL_DS
        dacr.kernel = DOMAIN_MANAGER
        interrupt
          pt_regs->addr_limit = addr_limit	// KERNEL_DS
          addr_limit = USER_DS
          alignment exception
          __probe_kernel_read()
            old_fs = get_fs()			// USER_DS
            set_fs(KERNEL_DS)
              addr_limit = KERNEL_DS
              dacr.kernel = DOMAIN_MANAGER
            ...
            set_fs(old_fs)
              addr_limit = USER_DS
              dacr.kernel = DOMAIN_CLIENT
          ...
          addr_limit = pt_regs->addr_limit	// KERNEL_DS
        interrupt returns

At this point, addr_limit is correctly restored to KERNEL_DS for __probe_kernel_read() to continue execution, but dacr.kernel is not, it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT.

This would not have happened prior to the mentioned commit, because addr_limit would remain KERNEL_DS, so get_fs() would have returned KERNEL_DS, and so would correctly nest.

This commit fixes the problem by also saving the DACR on exception entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are enabled, and resetting the DACR appropriately on exception entry to match addr_limit and PAN settings.

Fixes e6978e4bf181 ("ARM: save and reset the address limit when entering an exception")
---
 arch/arm/include/asm/uaccess-asm.h | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)
arch/arm/include/asm/uaccess-asm.h +20 -5
index e46468b91eaa..907571fd05c6 100644
@@ -67,15 +67,21 @@
 #endif
 	.endm
 
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+#if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS)
 #define DACR(x...)	x
 #else
 #define DACR(x...)
 #endif
 
 	/*
-	 * Save the address limit on entry to a privileged exception and
-	 * if using PAN, save and disable usermode access.
+	 * Save the address limit on entry to a privileged exception.
+	 *
+	 * If we are using the DACR for kernel access by the user accessors
+	 * (CONFIG_CPU_USE_DOMAINS=y), always reset the DACR kernel domain
+	 * back to client mode, whether or not \disable is set.
+	 *
+	 * If we are using SW PAN, set the DACR user domain to no access
+	 * if \disable is set.
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
 	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
@@ -84,8 +90,17 @@
  DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
  DACR(	str	\tmp0, [sp, #SVC_DACR])
 	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
-	.if \disable
-	uaccess_disable \tmp0
+	.if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN)
+	/* kernel=client, user=no access */
+	mov	\tmp2, #DACR_UACCESS_DISABLE
+	mcr	p15, 0, \tmp2, c3, c0, 0
+	instr_sync
+	.elseif IS_ENABLED(CONFIG_CPU_USE_DOMAINS)
+	/* kernel=client */
+	bic	\tmp2, \tmp0, #domain_mask(DOMAIN_KERNEL)
+	orr	\tmp2, \tmp2, #domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT)
+	mcr	p15, 0, \tmp2, c3, c0, 0
+	instr_sync
 	.endif
 	.endm
 
Signature · 1 line
2.25.1
author maintainer
#76 lore raw

PATCH 75/142 gpio: exar: Fix bad handling for ida_simple_get error path

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 333830aa149a87cabeb5d30fbcf12eecc8040d2c ]

The commit 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") added a goto jump to the common error handler for ida_simple_get() error, but this is wrong in two ways:
it doesn't set the proper return code and, more badly, it invokes ida_simple_remove() with a negative index that shall lead to a kernel panic via BUG_ON().

This patch addresses those two issues.

Fixes 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails")
---
 drivers/gpio/gpio-exar.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpio/gpio-exar.c +5 -2
index fae327d5b06e..6890d32d9f25 100644
@@ -145,8 +145,10 @@ static int gpio_exar_probe(struct platform_device *pdev)
 	mutex_init(&exar_gpio->lock);
 
 	index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
-	if (index < 0)
-		goto err_destroy;
+	if (index < 0) {
+		ret = index;
+		goto err_mutex_destroy;
+	}
 
 	sprintf(exar_gpio->name, "exar_gpio%d", index);
 	exar_gpio->gpio_chip.label = exar_gpio->name;
@@ -173,6 +175,7 @@ static int gpio_exar_probe(struct platform_device *pdev)
 
 err_destroy:
 	ida_simple_remove(&ida_index, index);
+err_mutex_destroy:
 	mutex_destroy(&exar_gpio->lock);
 	return ret;
 }
Signature · 1 line
2.25.1
author maintainer
#77 lore raw

PATCH 76/142 arm64: dts: mt8173: fix vcodec-enc clock

In reply to Greg Kroah-Hartman

From: Hsin-Yi Wang <[email protected]>

[ Upstream commit 3b1f6c5e4dfaf767f6f2f120cd93b347b5a9f1aa ]

Fix the assigned-clock-parents to higher frequency clock to avoid h264 encode timeout:

[  134.763465] mtk_vpu 10020000.vpu: vpu ipi 4 ack time out !
[  134.769008] [MTK_VCODEC][ERROR][18]: vpu_enc_send_msg() vpu_ipi_send msg_id c002 len 32 fail -5
[  134.777707] [MTK_VCODEC][ERROR][18]: vpu_enc_encode() AP_IPIMSG_ENC_ENCODE 0 fail

venc_sel is the clock used by h264 encoder, and venclt_sel is the clock used by vp8 encoder. Assign venc_sel to vcodecpll_ck and venclt_sel to vcodecpll_370p5.

    vcodecpll                         1482000000
       vcodecpll_ck                    494000000
          venc_sel                     494000000
...
       vcodecpll_370p5                 370500000
          venclt_sel                   370500000
Fixes fbbad0287cec ("arm64: dts: Using standard CCF interface to set vcodec clk")
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/mediatek/mt8173.dtsi +2 -2
index 15f1842f6df3..5891b7151432 100644
@@ -1397,8 +1397,8 @@
 				      "venc_lt_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
 					  <&topckgen CLK_TOP_VENC_LT_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
-						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>,
+						 <&topckgen CLK_TOP_VCODECPLL_370P5>;
 		};
 
 		vencltsys: clock-controller@19000000 {
Signature · 1 line
2.25.1
author maintainer
#78 lore raw

PATCH 77/142 soc: mediatek: cmdq: return send msg error code

In reply to Greg Kroah-Hartman

From: Dennis YC Hsieh <[email protected]>

[ Upstream commit 34c4e4072603ff5c174df73b973896abb76cbb51 ]

Return error code to client if send message fail,
so that client has chance to error handling.

---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/soc/mediatek/mtk-cmdq-helper.c +3 -1
index 73a852b2f417..34eec26b0c1f 100644
@@ -258,7 +258,9 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
 		spin_unlock_irqrestore(&client->lock, flags);
 	}
 
-	mbox_send_message(client->chan, pkt);
+	err = mbox_send_message(client->chan, pkt);
+	if (err < 0)
+		return err;
 	/* We can send next packet immediately, so just call txdone. */
 	mbox_client_txdone(client->chan, 0);
 
Signature · 1 line
2.25.1
author maintainer
#79 lore raw

PATCH 78/142 gpu/drm: Ingenic: Fix opaque pointer casted to wrong type

In reply to Greg Kroah-Hartman

From: Paul Cercueil <[email protected]>

[ Upstream commit abf56fadf0e208abfb13ad1ac0094416058da0ad ]

The opaque pointer passed to the IRQ handler is a pointer to the drm_device, not a pointer to our ingenic_drm structure.

It still worked, because our ingenic_drm structure contains the drm_device as its first field, so the pointer received had the same value, but this was not semantically correct.

Fixes 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs")
---
 drivers/gpu/drm/ingenic/ingenic-drm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/ingenic/ingenic-drm.c +1 -1
index 9e95f6fd5406..376fca6ca9f4 100644
@@ -467,7 +467,7 @@ static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder,
 
 static irqreturn_t ingenic_drm_irq_handler(int irq, void *arg)
 {
-	struct ingenic_drm *priv = arg;
+	struct ingenic_drm *priv = drm_device_get_priv(arg);
 	unsigned int state;
 
 	regmap_read(priv->map, JZ_REG_LCD_STATE, &state);
Signature · 1 line
2.25.1
author maintainer
#80 lore raw

PATCH 79/142 IB/qib: Call kobject_put() when kobject_init_and_add() fails

In reply to Greg Kroah-Hartman

From: Kaike Wan <[email protected]>

[ Upstream commit a35cd6447effd5c239b564c80fa109d05ff3d114 ]

When kobject_init_and_add() returns an error in the function qib_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released along with other kobjects when the sysfs is unregistered.

---
 drivers/infiniband/hw/qib/qib_sysfs.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/infiniband/hw/qib/qib_sysfs.c +5 -4
index 568b21eb6ea1..021df0654ba7 100644
@@ -760,7 +760,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 			"Skipping linkcontrol sysfs info, (err %d) port %u\n",
 			ret, port_num);
-		goto bail;
+		goto bail_link;
 	}
 	kobject_uevent(&ppd->pport_kobj, KOBJ_ADD);
 
@@ -770,7 +770,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 			"Skipping sl2vl sysfs info, (err %d) port %u\n",
 			ret, port_num);
-		goto bail_link;
+		goto bail_sl;
 	}
 	kobject_uevent(&ppd->sl2vl_kobj, KOBJ_ADD);
 
@@ -780,7 +780,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 			"Skipping diag_counters sysfs info, (err %d) port %u\n",
 			ret, port_num);
-		goto bail_sl;
+		goto bail_diagc;
 	}
 	kobject_uevent(&ppd->diagc_kobj, KOBJ_ADD);
 
@@ -793,7 +793,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 		 "Skipping Congestion Control sysfs info, (err %d) port %u\n",
 		 ret, port_num);
-		goto bail_diagc;
+		goto bail_cc;
 	}
 
 	kobject_uevent(&ppd->pport_cc_kobj, KOBJ_ADD);
@@ -854,6 +854,7 @@ void qib_verbs_unregister_sysfs(struct qib_devdata *dd)
 				&cc_table_bin_attr);
 			kobject_put(&ppd->pport_cc_kobj);
 		}
+		kobject_put(&ppd->diagc_kobj);
 		kobject_put(&ppd->sl2vl_kobj);
 		kobject_put(&ppd->pport_kobj);
 	}
Signature · 1 line
2.25.1
author maintainer
#81 lore raw

PATCH 80/142 ARM: dts/imx6q-bx50v3: Set display interface clock parents

In reply to Greg Kroah-Hartman

From: Robert Beckett <[email protected]>

[ Upstream commit 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 ]

Avoid LDB and IPU DI clocks both using the same parent. LDB requires pasthrough clock to avoid breaking timing while IPU DI does not.

Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV.

This fixes an issue where attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI that was done during the same modeset.

[Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M
originally chosen by Robert Beckett to avoid affecting eMMC clock by DRM atomic updates]

[Squash Robert's and Ian's commits for bisectability, update patch
description and add stable tag]

---
 arch/arm/boot/dts/imx6q-b450v3.dts  |  7 -------
 arch/arm/boot/dts/imx6q-b650v3.dts  |  7 -------
 arch/arm/boot/dts/imx6q-b850v3.dts  | 11 -----------
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 15 +++++++++++++++
 4 files changed, 15 insertions(+), 25 deletions(-)
arch/arm/boot/dts/imx6q-b450v3.dts +0 -7
index 95b8f2d71821..fb0980190aa0 100644
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 
arch/arm/boot/dts/imx6q-b650v3.dts +0 -7
index 611cb7ae7e55..8f762d9c5ae9 100644
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 
arch/arm/boot/dts/imx6q-b850v3.dts +0 -11
index e4cb118f88c6..1ea64ecf4291 100644
@@ -53,17 +53,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
 &ldb {
 	fsl,dual-channel;
 	status = "okay";
arch/arm/boot/dts/imx6q-bx50v3.dtsi +15 -0
index fa27dcdf06f1..1938b04199c4 100644
@@ -377,3 +377,18 @@
 		#interrupt-cells = <1>;
 	};
 };
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
Signature · 1 line
2.25.1
author maintainer
#82 lore raw

PATCH 81/142 ARM: dts: bcm2835-rpi-zero-w: Fix led polarity

In reply to Greg Kroah-Hartman

From: Vincent Stehlé <[email protected]>

[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Cc Stefan Wahren <[email protected]>
Cc Florian Fainelli <[email protected]>
---
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +1 -1
index 4c3f606e5b8d..f65448c01e31 100644
@@ -24,7 +24,7 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
 
Signature · 1 line
2.25.1
author maintainer
#83 lore raw

PATCH 82/142 ARM: dts: bcm: HR2: Fix PPI interrupt types

In reply to Greg Kroah-Hartman

From: Hamish Martin <[email protected]>

[ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ]

These error messages are output when booting on a BCM HR2 system:
GIC: PPI11 is secure or misconfigured
GIC: PPI13 is secure or misconfigured

Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers.

The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types").

Fixes b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/bcm-hr2.dtsi +3 -3
index e4d49731287f..e35398cc60a0 100644
@@ -75,7 +75,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -83,7 +83,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -91,7 +91,7 @@
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
Signature · 1 line
2.25.1
author maintainer
#84 lore raw

PATCH 83/142 mmc: block: Fix use-after-free issue for rpmb

In reply to Greg Kroah-Hartman

From: Peng Hao <[email protected]>

[ Upstream commit 202500d21654874aa03243e91f96de153ec61860 ]

The data structure member “rpmb->md” was passed to a call of the function “mmc_blk_put” after a call of the function “put_device”. Reorder these function calls to keep the data accesses consistent.

Fixes 1c87f7357849 ("mmc: block: Fix bug when removing RPMB chardev ")
[Uffe: Fixed up mangled patch and updated commit message]
---
 drivers/mmc/core/block.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/core/block.c +1 -1
index 9d01b5dca519..7f480c6b1981 100644
@@ -2475,8 +2475,8 @@ static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp)
 	struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev,
 						  struct mmc_rpmb_data, chrdev);
 
-	put_device(&rpmb->dev);
 	mmc_blk_put(rpmb->md);
+	put_device(&rpmb->dev);
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#85 lore raw

PATCH 84/142 gpio: pxa: Fix return value of pxa_gpio_probe()

In reply to Greg Kroah-Hartman

From: Tiezhu Yang <[email protected]>

[ Upstream commit 558ab2e8155e5f42ca0a6407957cd4173dc166cc ]

When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed.

Fixes 542c25b7a209 ("drivers: gpio: pxa: use devm_platform_ioremap_resource()")
---
 drivers/gpio/gpio-pxa.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpio/gpio-pxa.c +2 -2
index 9888b62f37af..432c487f77b4 100644
@@ -663,8 +663,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	pchip->irq1 = irq1;
 
 	gpio_reg_base = devm_platform_ioremap_resource(pdev, 0);
-	if (!gpio_reg_base)
-		return -EINVAL;
+	if (IS_ERR(gpio_reg_base))
+		return PTR_ERR(gpio_reg_base);
 
 	clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
Signature · 1 line
2.25.1
author maintainer
#86 lore raw

PATCH 85/142 gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()

In reply to Greg Kroah-Hartman

From: Tiezhu Yang <[email protected]>

[ Upstream commit 98f7d1b15e87c84488b30ecc4ec753b0690b9dbf ]

Propagate the error code returned by devm_platform_ioremap_resource() out of probe() instead of overwriting it.

Fixes 72d8cb715477 ("drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()")
[Bartosz: tweaked the commit message]
---
 drivers/gpio/gpio-bcm-kona.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpio/gpio-bcm-kona.c +1 -1
index 9fa6d3a967d2..100575973e1f 100644
@@ -619,7 +619,7 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)
 
 	kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(kona_gpio->reg_base)) {
-		ret = -ENXIO;
+		ret = PTR_ERR(kona_gpio->reg_base);
 		goto err_irq_domain;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#87 lore raw

PATCH 86/142 RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit db857e6ae548f0f4f4a0f63fffeeedf3cca21f9d ]

In function pvrdma_pci_probe(), pdev was not disabled in one error path. Thus replace the jump target “err_free_device” by "err_disable_pdev".

---
 drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c +1 -1
index e580ae9cc55a..780fd2dfc07e 100644
@@ -829,7 +829,7 @@ static int pvrdma_pci_probe(struct pci_dev *pdev,
 	    !(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 		dev_err(&pdev->dev, "PCI BAR region not MMIO\n");
 		ret = -ENOMEM;
-		goto err_free_device;
+		goto err_disable_pdev;
 	}
 
 	ret = pci_request_regions(pdev, DRV_NAME);
Signature · 1 line
2.25.1
author maintainer
#88 lore raw

PATCH 87/142 ALSA: hwdep: fix a left shifting 1 by 31 UB bug

In reply to Greg Kroah-Hartman

From: Changming Liu <[email protected]>

[ Upstream commit fb8cd6481ffd126f35e9e146a0dcf0c4e8899f2e ]

The "info.index" variable can be 31 in "1 << info.index". This might trigger an undefined behavior since 1 is signed.

Fix this by casting 1 to 1u just to be sure "1u << 31" is defined.

---
 sound/core/hwdep.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/core/hwdep.c +2 -2
index 00cb5aed10a9..28bec15b0959 100644
@@ -216,12 +216,12 @@ static int snd_hwdep_dsp_load(struct snd_hwdep *hw,
 	if (info.index >= 32)
 		return -EINVAL;
 	/* check whether the dsp was already loaded */
-	if (hw->dsp_loaded & (1 << info.index))
+	if (hw->dsp_loaded & (1u << info.index))
 		return -EBUSY;
 	err = hw->ops.dsp_load(hw, &info);
 	if (err < 0)
 		return err;
-	hw->dsp_loaded |= (1 << info.index);
+	hw->dsp_loaded |= (1u << info.index);
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#89 lore raw

PATCH 88/142 ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 399c01aa49e548c82d40f8161915a5941dd3c60e ]

We fixed the regression of the speaker volume for some Thinkpad models (e.g. T570) by the commit 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570"). Essentially it fixes the DAC / pin pairing by a static table. It was confirmed and merged to stable kernel later.

Now, interestingly, we got another regression report for the very same model (T570) about the similar problem, and the commit above was the culprit. That is, by some reason, there are devices that prefer the DAC1, and another device DAC2!

Unfortunately those have the same ID and we have no idea what can differentiate, in this patch, a new fixup model "tpt470-dock-fix" is provided, so that users with such a machine can apply it manually. When model=tpt470-dock-fix option is passed to snd-hda-intel module, it avoids the fixed DAC pairing and the DAC1 is assigned to the speaker like the earlier versions.

Fixes 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570")
---
 sound/pci/hda/patch_realtek.c | 36 +++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)
sound/pci/hda/patch_realtek.c +26 -10
index c5bec191e003..743e2dcccb8b 100644
@@ -5484,18 +5484,9 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec,
 		{ 0x19, 0x21a11010 }, /* dock mic */
 		{ }
 	};
-	/* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise
-	 * the speaker output becomes too low by some reason on Thinkpads with
-	 * ALC298 codec
-	 */
-	static const hda_nid_t preferred_pairs[] = {
-		0x14, 0x03, 0x17, 0x02, 0x21, 0x02,
-		0
-	};
 	struct alc_spec *spec = codec->spec;
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		spec->gen.preferred_dacs = preferred_pairs;
 		spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
 		snd_hda_apply_pincfgs(codec, pincfgs);
 	} else if (action == HDA_FIXUP_ACT_INIT) {
@@ -5508,6 +5499,23 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec,
 	}
 }
 
+static void alc_fixup_tpt470_dacs(struct hda_codec *codec,
+				  const struct hda_fixup *fix, int action)
+{
+	/* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise
+	 * the speaker output becomes too low by some reason on Thinkpads with
+	 * ALC298 codec
+	 */
+	static const hda_nid_t preferred_pairs[] = {
+		0x14, 0x03, 0x17, 0x02, 0x21, 0x02,
+		0
+	};
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE)
+		spec->gen.preferred_dacs = preferred_pairs;
+}
+
 static void alc_shutup_dell_xps13(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -6063,6 +6071,7 @@ enum {
 	ALC700_FIXUP_INTEL_REFERENCE,
 	ALC274_FIXUP_DELL_BIND_DACS,
 	ALC274_FIXUP_DELL_AIO_LINEOUT_VERB,
+	ALC298_FIXUP_TPT470_DOCK_FIX,
 	ALC298_FIXUP_TPT470_DOCK,
 	ALC255_FIXUP_DUMMY_LINEOUT_VERB,
 	ALC255_FIXUP_DELL_HEADSET_MIC,
@@ -6994,12 +7003,18 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC274_FIXUP_DELL_BIND_DACS
 	},
-	[ALC298_FIXUP_TPT470_DOCK] = {
+	[ALC298_FIXUP_TPT470_DOCK_FIX] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_tpt470_dock,
 		.chained = true,
 		.chain_id = ALC293_FIXUP_LENOVO_SPK_NOISE
 	},
+	[ALC298_FIXUP_TPT470_DOCK] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_tpt470_dacs,
+		.chained = true,
+		.chain_id = ALC298_FIXUP_TPT470_DOCK_FIX
+	},
 	[ALC255_FIXUP_DUMMY_LINEOUT_VERB] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -7638,6 +7653,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC292_FIXUP_TPT440_DOCK, .name = "tpt440-dock"},
 	{.id = ALC292_FIXUP_TPT440, .name = "tpt440"},
 	{.id = ALC292_FIXUP_TPT460, .name = "tpt460"},
+	{.id = ALC298_FIXUP_TPT470_DOCK_FIX, .name = "tpt470-dock-fix"},
 	{.id = ALC298_FIXUP_TPT470_DOCK, .name = "tpt470-dock"},
 	{.id = ALC233_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"},
 	{.id = ALC700_FIXUP_INTEL_REFERENCE, .name = "alc700-ref"},
Signature · 1 line
2.25.1
author maintainer
#90 lore raw

PATCH 89/142 ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC

In reply to Greg Kroah-Hartman

From: Chris Chiu <[email protected]>

[ Upstream commit 4020d1ccbe55bdf67b31d718d2400506eaf4b43f ]

The Asus USB DAC is a USB type-C audio dongle for connecting to the headset and headphone. The volume minimum value -23040 which is 0xa600 in hexadecimal with the resolution value 1 indicates this should be endianness issue caused by the firmware bug. Add a volume quirk to fix the volume control problem.

Also fixes this warning:
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1 Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1

---
 sound/usb/mixer.c | 8 ++++++++
 1 file changed, 8 insertions(+)
sound/usb/mixer.c +8 -0
index 583edacc9fe8..f55afe3a98e3 100644
@@ -1171,6 +1171,14 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
 			cval->res = 384;
 		}
 		break;
+	case USB_ID(0x0495, 0x3042): /* ESS Technology Asus USB DAC */
+		if ((strstr(kctl->id.name, "Playback Volume") != NULL) ||
+			strstr(kctl->id.name, "Capture Volume") != NULL) {
+			cval->min >>= 8;
+			cval->max = 0;
+			cval->res = 1;
+		}
+		break;
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#91 lore raw

PATCH 90/142 exec: Always set cap_ambient in cap_bprm_set_creds

In reply to Greg Kroah-Hartman

From: Eric W. Biederman <[email protected]>

[ Upstream commit a4ae32c71fe90794127b32d26d7ad795813b502e ]

An invariant of cap_bprm_set_creds is that every field in the new cred structure that cap_bprm_set_creds might set, needs to be set every time to ensure the fields does not get a stale value.

The field cap_ambient is not set every time cap_bprm_set_creds is called, which means that if there is a suid or sgid script with an interpreter that has neither the suid nor the sgid bits set the interpreter should be able to accept ambient credentials. Unfortuantely because cap_ambient is not reset to it's original value the interpreter can not accept ambient credentials.

Given that the ambient capability set is expected to be controlled by the caller, I don't think this is particularly serious. But it is definitely worth fixing so the code works correctly.

I have tested to verify my reading of the code is correct and the interpreter of a sgid can receive ambient capabilities with this change and cannot receive ambient capabilities without this change.

Cc Andy Lutomirski <[email protected]>
Fixes 58319057b784 ("capabilities: ambient capabilities")
---
 security/commoncap.c | 1 +
 1 file changed, 1 insertion(+)
security/commoncap.c +1 -0
index f4ee0ae106b2..0ca31c8bc0b1 100644
@@ -812,6 +812,7 @@ int cap_bprm_set_creds(struct linux_binprm *bprm)
 	int ret;
 	kuid_t root_uid;
 
+	new->cap_ambient = old->cap_ambient;
 	if (WARN_ON(!cap_ambient_invariant_ok(old)))
 		return -EPERM;
 
Signature · 1 line
2.25.1
author maintainer
#92 lore raw

PATCH 91/142 clk: qcom: gcc: Fix parent for gpll0_out_even

In reply to Greg Kroah-Hartman

From: Vinod Koul <[email protected]>

[ Upstream commit a76f274182f054481182c81cd62bb8794a5450a6 ]

Documentation says that gpll0 is parent of gpll0_out_even, somehow driver coded that as bi_tcxo, so fix it

Fixes 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
---
 drivers/clk/qcom/gcc-sm8150.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/clk/qcom/gcc-sm8150.c +1 -2
index 20877214acff..e3959ff5cb55 100644
@@ -75,8 +75,7 @@ static struct clk_alpha_pll_postdiv gpll0_out_even = {
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gpll0_out_even",
 		.parent_data = &(const struct clk_parent_data){
-			.fw_name = "bi_tcxo",
-			.name = "bi_tcxo",
+			.hw = &gpll0.clkr.hw,
 		},
 		.num_parents = 1,
 		.ops = &clk_trion_pll_postdiv_ops,
Signature · 1 line
2.25.1
author maintainer
#93 lore raw

PATCH 92/142 ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 7f5ad9c9003425175f46c94df380e8c9e558cfb5 ]

Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices, a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC (USB ID 0414:a000). The latter serves solely for the headphone output on the front panel while the former serves for the rest I/Os (mostly for the I/Os in the rear panel but also including the front mic).

Both chips do work more or less with the unmodified USB-audio driver, but there are a few glitches. The ALC1220-VB returns an error for an inquiry to some jacks, as already seen on other TRX40-based mobos. However this machine has a slightly incompatible configuration, hence the existing mapping cannot be used as is.

Meanwhile the ESS chip seems working without any quirk. But since both audio devices don't provide any specific names, both cards appear as "USB-Audio", and it's quite confusing for users.

This patch is an attempt to overcome those issues:

- The specific mapping table for ALC1220-VB is provided, reducing the non-working nodes and renaming the badly chosen controls. The connector map isn't needed here unlike other TRX40 quirks.

- For both USB IDs (0414:a000 and 0414:a001), provide specific card name strings, so that user-space can identify more easily; and more importantly, UCM profile can be applied to each.

---
 sound/usb/mixer_maps.c   | 19 +++++++++++++++++++
 sound/usb/quirks-table.h | 25 +++++++++++++++++++++++++
 2 files changed, 44 insertions(+)
sound/usb/mixer_maps.c +19 -0
index 2255f9abd7a5..ac84f0b2b0bc 100644
@@ -387,6 +387,21 @@ static const struct usbmix_connector_map trx40_mobo_connector_map[] = {
 	{}
 };
 
+/* Rear panel + front mic on Gigabyte TRX40 Aorus Master with ALC1220-VB */
+static const struct usbmix_name_map aorus_master_alc1220vb_map[] = {
+	{ 17, NULL },			/* OT, IEC958?, disabled */
+	{ 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */
+	{ 16, "Line Out" },		/* OT */
+	{ 22, "Line Out Playback" },	/* FU */
+	{ 7, "Line" },			/* IT */
+	{ 19, "Line Capture" },		/* FU */
+	{ 8, "Mic" },			/* IT */
+	{ 20, "Mic Capture" },		/* FU */
+	{ 9, "Front Mic" },		/* IT */
+	{ 21, "Front Mic Capture" },	/* FU */
+	{}
+};
+
 /*
  * Control map entries
  */
@@ -506,6 +521,10 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
 		.id = USB_ID(0x05a7, 0x1020),
 		.map = bose_companion5_map,
 	},
+	{	/* Gigabyte TRX40 Aorus Master (rear panel + front mic) */
+		.id = USB_ID(0x0414, 0xa001),
+		.map = aorus_master_alc1220vb_map,
+	},
 	{	/* Gigabyte TRX40 Aorus Pro WiFi */
 		.id = USB_ID(0x0414, 0xa002),
 		.map = trx40_mobo_map,
sound/usb/quirks-table.h +25 -0
index aa4c16ce0e57..bbae11605a4c 100644
@@ -3650,4 +3650,29 @@ ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */
 ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */
 #undef ALC1220_VB_DESKTOP
 
+/* Two entries for Gigabyte TRX40 Aorus Master:
+ * TRX40 Aorus Master has two USB-audio devices, one for the front headphone
+ * with ESS SABRE9218 DAC chip, while another for the rest I/O (the rear
+ * panel and the front mic) with Realtek ALC1220-VB.
+ * Here we provide two distinct names for making UCM profiles easier.
+ */
+{
+	USB_DEVICE(0x0414, 0xa000),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "Gigabyte",
+		.product_name = "Aorus Master Front Headphone",
+		.profile_name = "Gigabyte-Aorus-Master-Front-Headphone",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
+{
+	USB_DEVICE(0x0414, 0xa001),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "Gigabyte",
+		.product_name = "Aorus Master Main Audio",
+		.profile_name = "Gigabyte-Aorus-Master-Main-Audio",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
+
 #undef USB_DEVICE_VENDOR_SPEC
Signature · 1 line
2.25.1
author maintainer
#94 lore raw

PATCH 93/142 ALSA: hda/realtek - Add new codec supported for ALC287

In reply to Greg Kroah-Hartman

From: Kailang Yang <[email protected]>

[ Upstream commit 630e36126e420e1756378b3427b42711ce0b9ddd ]

Enable new codec supported for ALC287.

---
 sound/pci/hda/patch_realtek.c | 3 +++
 1 file changed, 3 insertions(+)
sound/pci/hda/patch_realtek.c +3 -0
index 743e2dcccb8b..da4d21445e80 100644
@@ -384,6 +384,7 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 	case 0x10ec0282:
 	case 0x10ec0283:
 	case 0x10ec0286:
+	case 0x10ec0287:
 	case 0x10ec0288:
 	case 0x10ec0285:
 	case 0x10ec0298:
@@ -8321,6 +8322,7 @@ static int patch_alc269(struct hda_codec *codec)
 	case 0x10ec0215:
 	case 0x10ec0245:
 	case 0x10ec0285:
+	case 0x10ec0287:
 	case 0x10ec0289:
 		spec->codec_variant = ALC269_TYPE_ALC215;
 		spec->shutup = alc225_shutup;
@@ -9599,6 +9601,7 @@ static const struct hda_device_id snd_hda_id_realtek[] = {
 	HDA_CODEC_ENTRY(0x10ec0284, "ALC284", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0285, "ALC285", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0286, "ALC286", patch_alc269),
+	HDA_CODEC_ENTRY(0x10ec0287, "ALC287", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0288, "ALC288", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0289, "ALC289", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0290, "ALC290", patch_alc269),
Signature · 1 line
2.25.1
author maintainer
#95 lore raw

PATCH 94/142 libceph: ignore pool overlay and cache logic on redirects

In reply to Greg Kroah-Hartman

From: Jerry Lee <[email protected]>

[ Upstream commit 890bd0f8997ae6ac0a367dd5146154a3963306dd ]

OSD client should ignore cache/overlay flag if got redirect reply. Otherwise, the client hangs when the cache tier is in forward mode.

[ idryomov: Redirects are effectively deprecated and no longer
used or tested. The original tiering modes based on redirects are inherently flawed because redirects can race and reorder, potentially resulting in data corruption. The new proxy and readproxy tiering modes should be used instead of forward and readforward. Still marking for stable as obviously correct, though. ]

Cc: [email protected]
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406

---
 net/ceph/osd_client.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/ceph/osd_client.c +3 -1
index 2352afa62d1f..e513b8876d13 100644
@@ -3652,7 +3652,9 @@ static void handle_reply(struct ceph_osd *osd, struct ceph_msg *msg)
 		 * supported.
 		 */
 		req->r_t.target_oloc.pool = m.redirect.oloc.pool;
-		req->r_flags |= CEPH_OSD_FLAG_REDIRECTED;
+		req->r_flags |= CEPH_OSD_FLAG_REDIRECTED |
+				CEPH_OSD_FLAG_IGNORE_OVERLAY |
+				CEPH_OSD_FLAG_IGNORE_CACHE;
 		req->r_tid = 0;
 		__submit_request(req, false);
 		goto out_unlock_osdc;
Signature · 1 line
2.25.1
author maintainer
#96 lore raw

PATCH 95/142 ceph: flush release queue when handling caps for unknown inode

In reply to Greg Kroah-Hartman

From: Jeff Layton <[email protected]>

[ Upstream commit fb33c114d3ed5bdac230716f5b0a93b56b92a90d ]

It's possible for the VFS to completely forget about an inode, but for it to still be sitting on the cap release queue. If the MDS sends the client a cap message for such an inode, it just ignores it today, which can lead to a stall of up to 5s until the cap release queue is flushed.

If we get a cap message for an inode that can't be located, then go ahead and flush the cap release queue.

Cc: [email protected]
URL: https://tracker.ceph.com/issues/45532

Fixes 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped")
---
 fs/ceph/caps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ceph/caps.c +1 -1
index 2d602c2b0ff6..b2695919435e 100644
@@ -3938,7 +3938,7 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 			__ceph_queue_cap_release(session, cap);
 			spin_unlock(&session->s_cap_lock);
 		}
-		goto done;
+		goto flush_cap_releases;
 	}
 
 	/* these will work even if we don't have a cap yet */
Signature · 1 line
2.25.1
author maintainer
#97 lore raw

PATCH 96/142 RDMA/core: Fix double destruction of uobject

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit c85f4abe66bea0b5db8d28d55da760c4fe0a0301 ]

Fix use after free when user user space request uobject concurrently for the same object, within the RCU grace period.

In that case, remove_handle_idr_uobject() is called twice and we will have an extra put on the uobject which cause use after free. Fix it by leaving the uobject write locked after it was removed from the idr.

Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of UVERBS_LOOKUP_WRITE will do the work.

refcount_t: underflow; use-after-free.

  WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x94/0xce
   panic+0x234/0x56f
   __warn+0x1cc/0x1e1
   report_bug+0x200/0x310
   fixup_bug.part.11+0x32/0x80
   do_error_trap+0xd3/0x100
   do_invalid_op+0x31/0x40
   invalid_op+0x1e/0x30
  RIP: 0010:refcount_warn_saturate+0xfe/0x1a0
  Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c
  RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009
  RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc
  RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3
  R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c
  R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08
   uverbs_uobject_put+0xfd/0x140
   __uobj_perform_destroy+0x3d/0x60
   ib_uverbs_close_xrcd+0x148/0x170
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x465b49
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49
  RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc
  R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes 7452a3c745a2 ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate")
---
 drivers/infiniband/core/rdma_core.c | 20 +++++++++++++-------
 include/rdma/uverbs_std_types.h     |  2 +-
 2 files changed, 14 insertions(+), 8 deletions(-)
drivers/infiniband/core/rdma_core.c +13 -7
index 1c95fefa1f06..d0580eed3bcb 100644
@@ -160,9 +160,9 @@ static int uverbs_destroy_uobject(struct ib_uobject *uobj,
 	uobj->context = NULL;
 
 	/*
-	 * For DESTROY the usecnt is held write locked, the caller is expected
-	 * to put it unlock and put the object when done with it. Only DESTROY
-	 * can remove the IDR handle.
+	 * For DESTROY the usecnt is not changed, the caller is expected to
+	 * manage it via uobj_put_destroy(). Only DESTROY can remove the IDR
+	 * handle.
 	 */
 	if (reason != RDMA_REMOVE_DESTROY)
 		atomic_set(&uobj->usecnt, 0);
@@ -194,7 +194,7 @@ static int uverbs_destroy_uobject(struct ib_uobject *uobj,
 /*
  * This calls uverbs_destroy_uobject() using the RDMA_REMOVE_DESTROY
  * sequence. It should only be used from command callbacks. On success the
- * caller must pair this with rdma_lookup_put_uobject(LOOKUP_WRITE). This
+ * caller must pair this with uobj_put_destroy(). This
  * version requires the caller to have already obtained an
  * LOOKUP_DESTROY uobject kref.
  */
@@ -205,6 +205,13 @@ int uobj_destroy(struct ib_uobject *uobj, struct uverbs_attr_bundle *attrs)
 
 	down_read(&ufile->hw_destroy_rwsem);
 
+	/*
+	 * Once the uobject is destroyed by RDMA_REMOVE_DESTROY then it is left
+	 * write locked as the callers put it back with UVERBS_LOOKUP_DESTROY.
+	 * This is because any other concurrent thread can still see the object
+	 * in the xarray due to RCU. Leaving it locked ensures nothing else will
+	 * touch it.
+	 */
 	ret = uverbs_try_lock_object(uobj, UVERBS_LOOKUP_WRITE);
 	if (ret)
 		goto out_unlock;
@@ -223,7 +230,7 @@ out_unlock:
 /*
  * uobj_get_destroy destroys the HW object and returns a handle to the uobj
  * with a NULL object pointer. The caller must pair this with
- * uverbs_put_destroy.
+ * uobj_put_destroy().
  */
 struct ib_uobject *__uobj_get_destroy(const struct uverbs_api_object *obj,
 				      u32 id, struct uverbs_attr_bundle *attrs)
@@ -257,8 +264,7 @@ int __uobj_perform_destroy(const struct uverbs_api_object *obj, u32 id,
 	uobj = __uobj_get_destroy(obj, id, attrs);
 	if (IS_ERR(uobj))
 		return PTR_ERR(uobj);
-
-	rdma_lookup_put_uobject(uobj, UVERBS_LOOKUP_WRITE);
+	uobj_put_destroy(uobj);
 	return 0;
 }
 
include/rdma/uverbs_std_types.h +1 -1
index 05eabfd5d0d3..9f382e7d4579 100644
@@ -88,7 +88,7 @@ struct ib_uobject *__uobj_get_destroy(const struct uverbs_api_object *obj,
 
 static inline void uobj_put_destroy(struct ib_uobject *uobj)
 {
-	rdma_lookup_put_uobject(uobj, UVERBS_LOOKUP_WRITE);
+	rdma_lookup_put_uobject(uobj, UVERBS_LOOKUP_DESTROY);
 }
 
 static inline void uobj_put_read(struct ib_uobject *uobj)
Signature · 1 line
2.25.1
author maintainer
#98 lore raw

PATCH 97/142 drm/amd/display: drop cursor position check in atomic test

In reply to Greg Kroah-Hartman

From: Simon Ser <[email protected]>

[ Upstream commit f7d5991b92ff824798693ddf231cf814c9d5a88b ]

get_cursor_position already handles the case where the cursor has negative off-screen coordinates by not setting dc_cursor_position.enabled.

Fixes 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane")
Cc Alex Deucher <[email protected]>
Cc Nicholas Kazlauskas <[email protected]>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 -------
 1 file changed, 7 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +0 -7
index 9f30343262f3..9fd12e108a70 100644
@@ -6951,13 +6951,6 @@ static int dm_update_plane_state(struct dc *dc,
 			return -EINVAL;
 		}
 
-		if (new_plane_state->crtc_x <= -new_acrtc->max_cursor_width ||
-			new_plane_state->crtc_y <= -new_acrtc->max_cursor_height) {
-			DRM_DEBUG_ATOMIC("Bad cursor position %d, %d\n",
-							 new_plane_state->crtc_x, new_plane_state->crtc_y);
-			return -EINVAL;
-		}
-
 		return 0;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#99 lore raw

PATCH 98/142 IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode

In reply to Greg Kroah-Hartman

From: Valentine Fatiev <[email protected]>

[ Upstream commit 1acba6a817852d4aa7916d5c4f2c82f702ee9224 ]

When connected mode is set, and we have connected and datagram traffic in parallel, ipoib might crash with double free of datagram skb.

The current mechanism assumes that the order in the completion queue is the same as the order of sent packets for all QPs. Order is kept only for specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and few CM's) in parallel.

The problem:
----------------------------------------------------------

Transmit queue:
-----------------
UD skb pointer kept in queue itself, CM skb kept in spearate queue and uses transmit queue as a placeholder to count the number of total transmitted packets.

0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^
tail head

Completion queue (problematic scenario) - the order not the same as in the transmit queue:

1 2 3 4 5 6 7 8 9
------------------------------------
ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5
------------------------------------

1. CM1 'wc' processing
- skb freed in cm separate ring.
- tx_tail of transmit queue increased although UD2 is not freed. Now driver assumes UD2 index is already freed and it could be used for new transmitted skb.

0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^ ^
(Bad)tail head
(Bad - Could be used for new SKB)

In this case (due to heavy load) UD2 skb pointer could be replaced by new transmitted packet UD_NEW, as the driver assumes its free. At this point we will have to process two 'wc' with same index but we have only one pointer to free.

During second attempt to free the same skb we will have NULL pointer exception.

2. UD2 'wc' processing
- skb freed according the index we got from 'wc', but it was already overwritten by mistake. So actually the skb that was released is the skb of the new transmitted packet and not the original one.

3. UD_NEW 'wc' processing
- attempt to free already freed skb. NUll pointer exception.

The fix:
-----------------------------------------------------------------------

The fix is to stop using the UD ring as a placeholder for CM packets, the cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a new cyclic variables global_tx_head and global_tx_tail are introduced for managing and counting the overall outstanding sent packets, then the send queue will be stopped and waken based on these variables only.

Note that no locking is needed since global_tx_head is updated in the xmit flow and global_tx_tail is updated in the NAPI flow only. A previous attempt tried to use one variable to count the outstanding sent packets, but it did not work since xmit and NAPI flows can run at the same time and the counter will be updated wrongly. Thus, we use the same simple cyclic head and tail scheme that we have today for the UD tx_ring.

---
 drivers/infiniband/ulp/ipoib/ipoib.h      |  4 ++++
 drivers/infiniband/ulp/ipoib/ipoib_cm.c   | 15 +++++++++------
 drivers/infiniband/ulp/ipoib/ipoib_ib.c   |  9 +++++++--
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 10 ++++++----
 4 files changed, 26 insertions(+), 12 deletions(-)
drivers/infiniband/ulp/ipoib/ipoib.h +4 -0
index 2aa3457a30ce..0e5f27caf2b2 100644
@@ -377,8 +377,12 @@ struct ipoib_dev_priv {
 	struct ipoib_rx_buf *rx_ring;
 
 	struct ipoib_tx_buf *tx_ring;
+	/* cyclic ring variables for managing tx_ring, for UD only */
 	unsigned int	     tx_head;
 	unsigned int	     tx_tail;
+	/* cyclic ring variables for counting overall outstanding send WRs */
+	unsigned int	     global_tx_head;
+	unsigned int	     global_tx_tail;
 	struct ib_sge	     tx_sge[MAX_SKB_FRAGS + 1];
 	struct ib_ud_wr      tx_wr;
 	struct ib_wc	     send_wc[MAX_SEND_CQE];
drivers/infiniband/ulp/ipoib/ipoib_cm.c +9 -6
index c59e00a0881f..9bf0fa30df28 100644
@@ -756,7 +756,8 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 		return;
 	}
 
-	if ((priv->tx_head - priv->tx_tail) == ipoib_sendq_size - 1) {
+	if ((priv->global_tx_head - priv->global_tx_tail) ==
+	    ipoib_sendq_size - 1) {
 		ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
 			  tx->qp->qp_num);
 		netif_stop_queue(dev);
@@ -786,7 +787,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 	} else {
 		netif_trans_update(dev);
 		++tx->tx_head;
-		++priv->tx_head;
+		++priv->global_tx_head;
 	}
 }
 
@@ -820,10 +821,11 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc)
 	netif_tx_lock(dev);
 
 	++tx->tx_tail;
-	++priv->tx_tail;
+	++priv->global_tx_tail;
 
 	if (unlikely(netif_queue_stopped(dev) &&
-		     (priv->tx_head - priv->tx_tail) <= ipoib_sendq_size >> 1 &&
+		     ((priv->global_tx_head - priv->global_tx_tail) <=
+		      ipoib_sendq_size >> 1) &&
 		     test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)))
 		netif_wake_queue(dev);
 
@@ -1232,8 +1234,9 @@ timeout:
 		dev_kfree_skb_any(tx_req->skb);
 		netif_tx_lock_bh(p->dev);
 		++p->tx_tail;
-		++priv->tx_tail;
-		if (unlikely(priv->tx_head - priv->tx_tail == ipoib_sendq_size >> 1) &&
+		++priv->global_tx_tail;
+		if (unlikely((priv->global_tx_head - priv->global_tx_tail) <=
+			     ipoib_sendq_size >> 1) &&
 		    netif_queue_stopped(p->dev) &&
 		    test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
 			netif_wake_queue(p->dev);
drivers/infiniband/ulp/ipoib/ipoib_ib.c +7 -2
index c332b4761816..da3c5315bbb5 100644
@@ -407,9 +407,11 @@ static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc)
 	dev_kfree_skb_any(tx_req->skb);
 
 	++priv->tx_tail;
+	++priv->global_tx_tail;
 
 	if (unlikely(netif_queue_stopped(dev) &&
-		     ((priv->tx_head - priv->tx_tail) <= ipoib_sendq_size >> 1) &&
+		     ((priv->global_tx_head - priv->global_tx_tail) <=
+		      ipoib_sendq_size >> 1) &&
 		     test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)))
 		netif_wake_queue(dev);
 
@@ -634,7 +636,8 @@ int ipoib_send(struct net_device *dev, struct sk_buff *skb,
 	else
 		priv->tx_wr.wr.send_flags &= ~IB_SEND_IP_CSUM;
 	/* increase the tx_head after send success, but use it for queue state */
-	if (priv->tx_head - priv->tx_tail == ipoib_sendq_size - 1) {
+	if ((priv->global_tx_head - priv->global_tx_tail) ==
+	    ipoib_sendq_size - 1) {
 		ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n");
 		netif_stop_queue(dev);
 	}
@@ -662,6 +665,7 @@ int ipoib_send(struct net_device *dev, struct sk_buff *skb,
 
 		rc = priv->tx_head;
 		++priv->tx_head;
+		++priv->global_tx_head;
 	}
 	return rc;
 }
@@ -807,6 +811,7 @@ int ipoib_ib_dev_stop_default(struct net_device *dev)
 				ipoib_dma_unmap_tx(priv, tx_req);
 				dev_kfree_skb_any(tx_req->skb);
 				++priv->tx_tail;
+				++priv->global_tx_tail;
 			}
 
 			for (i = 0; i < ipoib_recvq_size; ++i) {
drivers/infiniband/ulp/ipoib/ipoib_main.c +6 -4
index ac0583ff280d..4fd095fd63b6 100644
@@ -1188,9 +1188,11 @@ static void ipoib_timeout(struct net_device *dev)
 
 	ipoib_warn(priv, "transmit timeout: latency %d msecs\n",
 		   jiffies_to_msecs(jiffies - dev_trans_start(dev)));
-	ipoib_warn(priv, "queue stopped %d, tx_head %u, tx_tail %u\n",
-		   netif_queue_stopped(dev),
-		   priv->tx_head, priv->tx_tail);
+	ipoib_warn(priv,
+		   "queue stopped %d, tx_head %u, tx_tail %u, global_tx_head %u, global_tx_tail %u\n",
+		   netif_queue_stopped(dev), priv->tx_head, priv->tx_tail,
+		   priv->global_tx_head, priv->global_tx_tail);
+
 	/* XXX reset QP, etc. */
 }
 
@@ -1705,7 +1707,7 @@ static int ipoib_dev_init_default(struct net_device *dev)
 		goto out_rx_ring_cleanup;
 	}
 
-	/* priv->tx_head, tx_tail & tx_outstanding are already 0 */
+	/* priv->tx_head, tx_tail and global_tx_tail/head are already 0 */
 
 	if (ipoib_transport_dev_init(dev, priv->ca)) {
 		pr_warn("%s: ipoib_transport_dev_init failed\n",
Signature · 1 line
2.25.1
author maintainer
#100 lore raw

PATCH 99/142 mm,thp: stop leaking unreleased file pages

In reply to Greg Kroah-Hartman

From: Hugh Dickins <[email protected]>

[ Upstream commit 2f33a706027c94cd4f70fcd3e3f4a17c1ce4ea4b ]

When collapse_file() calls try_to_release_page(), it has already isolated the page: so if releasing buffers happens to fail (as it sometimes does), remember to putback_lru_page(): otherwise that page is left unreclaimable and unfreeable, and the file extent uncollapsible.

---
 mm/khugepaged.c | 1 +
 1 file changed, 1 insertion(+)
mm/khugepaged.c +1 -0
index a8a57bebb5fa..f765475be359 100644
@@ -1655,6 +1655,7 @@ static void collapse_file(struct mm_struct *mm,
 		if (page_has_private(page) &&
 		    !try_to_release_page(page, GFP_KERNEL)) {
 			result = SCAN_PAGE_HAS_PRIVATE;
+			putback_lru_page(page);
 			goto out_unlock;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#101 lore raw

PATCH 100/142 mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()

In reply to Greg Kroah-Hartman

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit 6988f31d558aa8c744464a7f6d91d34ada48ad12 ]

Replace superfluous VM_BUG_ON() with comment about correct usage.

Technically reverts commit 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to page_mapcount()"), but context lines have changed.

Function isolate_migratepages_block() runs some checks out of lru_lock when choose pages for migration. After checking PageLRU() it checks extra page references by comparing page_count() and page_mapcount(). Between these two checks page could be removed from lru, freed and taken by slab.

As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount(). Race window is tiny. For certain workload this happens around once a year.

    page:ffffea0105ca9380 count:1 mapcount:0 mapping:ffff88ff7712c180 index:0x0 compound_mapcount: 0
    flags: 0x500000000008100(slab|head)
    raw: 0500000000008100 dead000000000100 dead000000000200 ffff88ff7712c180
    raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
    page dumped because: VM_BUG_ON_PAGE(PageSlab(page))
    ------------[ cut here ]------------
    kernel BUG at ./include/linux/mm.h:628!
    invalid opcode: 0000 [#1] SMP NOPTI
    CPU: 77 PID: 504 Comm: kcompactd1 Tainted: G        W         4.19.109-27 #1
    Hardware name: Yandex T175-N41-Y3N/MY81-EX0-Y3N, BIOS R05 06/20/2019
    RIP: 0010:isolate_migratepages_block+0x986/0x9b0

The code in isolate_migratepages_block() was added in commit 119d6d59dcc0 ("mm, compaction: avoid isolating pinned pages") before adding VM_BUG_ON into page_mapcount().

This race has been predicted in 2015 by Vlastimil Babka (see link below).

---
 include/linux/mm.h | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
include/linux/mm.h +13 -2
index afa77b683a04..53bad834adf5 100644
@@ -695,6 +695,11 @@ static inline void *kvcalloc(size_t n, size_t size, gfp_t flags)
 
 extern void kvfree(const void *addr);
 
+/*
+ * Mapcount of compound page as a whole, does not include mapped sub-pages.
+ *
+ * Must be called only for compound pages or any their tail sub-pages.
+ */
 static inline int compound_mapcount(struct page *page)
 {
 	VM_BUG_ON_PAGE(!PageCompound(page), page);
@@ -714,10 +719,16 @@ static inline void page_mapcount_reset(struct page *page)
 
 int __page_mapcount(struct page *page);
 
+/*
+ * Mapcount of 0-order page; when compound sub-page, includes
+ * compound_mapcount().
+ *
+ * Result is undefined for pages which cannot be mapped into userspace.
+ * For example SLAB or special types of pages. See function page_has_type().
+ * They use this place in struct page differently.
+ */
 static inline int page_mapcount(struct page *page)
 {
-	VM_BUG_ON_PAGE(PageSlab(page), page);
-
 	if (unlikely(PageCompound(page)))
 		return __page_mapcount(page);
 	return atomic_read(&page->_mapcount) + 1;
Signature · 1 line
2.25.1
author maintainer
#102 lore raw

PATCH 101/142 fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()

In reply to Greg Kroah-Hartman

From: Alexander Potapenko <[email protected]>

[ Upstream commit 1d605416fb7175e1adf094251466caa52093b413 ]

KMSAN reported uninitialized data being written to disk when dumping core. As a result, several kilobytes of kmalloc memory may be written to the core file and then read by a non-privileged user.

---
 fs/binfmt_elf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/binfmt_elf.c +1 -1
index c5642bcb6b46..7ce3cfd965d2 100644
@@ -1731,7 +1731,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
 		    (!regset->active || regset->active(t->task, regset) > 0)) {
 			int ret;
 			size_t size = regset_size(t->task, regset);
-			void *data = kmalloc(size, GFP_KERNEL);
+			void *data = kzalloc(size, GFP_KERNEL);
 			if (unlikely(!data))
 				return 0;
 			ret = regset->get(t->task, regset,
Signature · 1 line
2.25.1
author maintainer
#103 lore raw

PATCH 102/142 include/asm-generic/topology.h: guard cpumask_of_node() macro argument

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 4377748c7b5187c3342a60fa2ceb60c8a57a8488 ]

drivers/hwmon/amd_energy.c:195:15: error: invalid operands to binary expression ('void' and 'int')

                                        (channel - data->nr_cpus));
                                        ~~~~~~~~~^~~~~~~~~~~~~~~~~
include/asm-generic/topology.h:51:42: note: expanded from macro 'cpumask_of_node'
    #define cpumask_of_node(node)       ((void)node, cpu_online_mask)
                                               ^~~~
include/linux/cpumask.h:618:72: note: expanded from macro 'cpumask_first_and'
 #define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p))
                                                                       ^~~~~
Fixes f0b848ce6fe9 ("cpumask: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask")
Fixes 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters")
---
 include/asm-generic/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/asm-generic/topology.h +1 -1
index 238873739550..5aa8705df87e 100644
@@ -48,7 +48,7 @@
   #ifdef CONFIG_NEED_MULTIPLE_NODES
     #define cpumask_of_node(node)	((node) == 0 ? cpu_online_mask : cpu_none_mask)
   #else
-    #define cpumask_of_node(node)	((void)node, cpu_online_mask)
+    #define cpumask_of_node(node)	((void)(node), cpu_online_mask)
   #endif
 #endif
 #ifndef pcibus_to_node
Signature · 1 line
2.25.1
author maintainer
#104 lore raw

PATCH 103/142 Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

In reply to Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

[ Upstream commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e ]

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

---
 block/blk-core.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
block/blk-core.c +4 -7
index 1075aaff606d..d5e668ec751b 100644
@@ -886,14 +886,11 @@ generic_make_request_checks(struct bio *bio)
 	}
 
 	/*
-	 * Non-mq queues do not honor REQ_NOWAIT, so complete a bio
-	 * with BLK_STS_AGAIN status in order to catch -EAGAIN and
-	 * to give a chance to the caller to repeat request gracefully.
+	 * For a REQ_NOWAIT based request, return -EOPNOTSUPP
+	 * if queue is not a request based queue.
 	 */
-	if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q)) {
-		status = BLK_STS_AGAIN;
-		goto end_io;
-	}
+	if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q))
+		goto not_supported;
 
 	if (should_fail_bio(bio))
 		goto end_io;
Signature · 1 line
2.25.1
#105 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Hi,

Quoted 10 lines · Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

[ Upstream commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e ]

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines
---
 block/blk-core.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

This broke io_uring direct-io on ext4 over md.

fallocate -l $((1024*1024*1024)) /srv/part1
fallocate -l $((1024*1024*1024)) /srv/part2
losetup -f /srv/part1
losetup -f /srv/part2
losetup -a # assuming these were loop0/1
mdadm --create -n2 -l stripe -N fast-striped /dev/md/fast-striped /dev/loop0 /dev/loop1 mkfs.ext4 /dev/md/fast-striped
mount /dev/md/fast-striped /mnt/t2
fio --directory=/mnt/t2 --ioengine io_uring --rw write --filesize 1MB --overwrite=1 --name=test --direct=1 --bs=4k

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

which isn't in stable/linux-5.4.y

Greetings,

Andres Freund

author maintainer
#106 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Quoted 60 lines · Andres Freund

Hi,

Quoted 10 lines · Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

[ Upstream commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e ]

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines
---
 block/blk-core.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

This broke io_uring direct-io on ext4 over md.

fallocate -l $((1024*1024*1024)) /srv/part1
fallocate -l $((1024*1024*1024)) /srv/part2
losetup -f /srv/part1
losetup -f /srv/part2
losetup -a # assuming these were loop0/1
mdadm --create -n2 -l stripe -N fast-striped /dev/md/fast-striped /dev/loop0 /dev/loop1 mkfs.ext4 /dev/md/fast-striped
mount /dev/md/fast-striped /mnt/t2
fio --directory=/mnt/t2 --ioengine io_uring --rw write --filesize 1MB --overwrite=1 --name=test --direct=1 --bs=4k

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

thanks,

greg k-h

#107 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Hi,

Quoted 26 lines · Greg Kroah-Hartman
Quoted 26 lines

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 6 lines
Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

It doesn't apply cleanly, I'll try to resolve the conflict. However, I assume that the revert was for a concrete reason - but I can't quite figure out what b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e was concretely solving, and whether reverting the revert in 5.4 would re-introduce a different problem.

commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e (tag: block-5.7-2020-05-29, linux-block/block-5.7)

Author: Jens Axboe <[email protected]>
Date:   2020-05-28 13:19:29 -0600

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

I suspect it just wasn't aimed at 5.4, and that's that, but I'm not sure. In which case presumably reverting bba91cdba612fbce4f8575c5d94d2b146fb83ea3 would be the right fix, not backporting 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048 et al.

Greetings,

Andres Freund

author maintainer
#108 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Quoted 54 lines · Andres Freund

Hi,

Quoted 26 lines · Greg Kroah-Hartman
Quoted 26 lines

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 6 lines
Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

It doesn't apply cleanly, I'll try to resolve the conflict. However, I assume that the revert was for a concrete reason - but I can't quite figure out what b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e was concretely solving, and whether reverting the revert in 5.4 would re-introduce a different problem.

commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e (tag: block-5.7-2020-05-29, linux-block/block-5.7)

Author: Jens Axboe <[email protected]>
Date:   2020-05-28 13:19:29 -0600

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines

I suspect it just wasn't aimed at 5.4, and that's that, but I'm not sure. In which case presumably reverting bba91cdba612fbce4f8575c5d94d2b146fb83ea3 would be the right fix, not backporting 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048 et al.

Ok, can you send a revert patch for this?

But it would be good to get Jens to weigh in on this...

thanks,

greg k-h

maintainer
#109 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Quoted 59 lines · Greg Kroah-Hartman
Quoted 58 lines · Andres Freund

Hi,

Quoted 26 lines · Greg Kroah-Hartman
Quoted 26 lines

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 6 lines
Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

It doesn't apply cleanly, I'll try to resolve the conflict. However, I assume that the revert was for a concrete reason - but I can't quite figure out what b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e was concretely solving, and whether reverting the revert in 5.4 would re-introduce a different problem.

commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e (tag: block-5.7-2020-05-29, linux-block/block-5.7)

Author: Jens Axboe <[email protected]>
Date:   2020-05-28 13:19:29 -0600

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines
Quoted 4 lines

I suspect it just wasn't aimed at 5.4, and that's that, but I'm not sure. In which case presumably reverting bba91cdba612fbce4f8575c5d94d2b146fb83ea3 would be the right fix, not backporting 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048 et al.

Ok, can you send a revert patch for this?

But it would be good to get Jens to weigh in on this...

I'll take a look at this.

Signature · 1 line
Jens Axboe
#110 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Hi,

Quoted 54 lines · Jens Axboe
Quoted 53 lines · Greg Kroah-Hartman
Quoted 52 lines · Andres Freund
Quoted 26 lines · Greg Kroah-Hartman
Quoted 26 lines

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 6 lines
Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

It doesn't apply cleanly, I'll try to resolve the conflict. However, I assume that the revert was for a concrete reason - but I can't quite figure out what b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e was concretely solving, and whether reverting the revert in 5.4 would re-introduce a different problem.

commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e (tag: block-5.7-2020-05-29, linux-block/block-5.7)

Author: Jens Axboe <[email protected]>
Date:   2020-05-28 13:19:29 -0600

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

I suspect it just wasn't aimed at 5.4, and that's that, but I'm not sure. In which case presumably reverting bba91cdba612fbce4f8575c5d94d2b146fb83ea3 would be the right fix, not backporting 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048 et al.

Having looked a bit more through the history, I suspect that the reason 5.6 doesn't need c58c1f83436b501d45d4050fd1296d71a9760bcb - which I have confirmed - is that ext4 was converted to the iomap infrastructure in 5.5, but not in 5.4.

I've confirmed that the repro I shared upthread triggers in 378f32bab3714f04c4e0c3aee4129f6703805550^ but not in 378f32bab3714f04c4e0c3aee4129f6703805550.

Quoted 5 lines
Quoted 3 lines

Ok, can you send a revert patch for this?

But it would be good to get Jens to weigh in on this...

I'll take a look at this.

Thanks.

Greetings,

Andres Freund

maintainer
#111 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Quoted 66 lines · Andres Freund

Hi,

Quoted 54 lines · Jens Axboe
Quoted 53 lines · Greg Kroah-Hartman
Quoted 52 lines · Andres Freund
Quoted 26 lines · Greg Kroah-Hartman
Quoted 26 lines

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 6 lines
Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

It doesn't apply cleanly, I'll try to resolve the conflict. However, I assume that the revert was for a concrete reason - but I can't quite figure out what b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e was concretely solving, and whether reverting the revert in 5.4 would re-introduce a different problem.

commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e (tag: block-5.7-2020-05-29, linux-block/block-5.7)

Author: Jens Axboe <[email protected]>
Date:   2020-05-28 13:19:29 -0600

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

I suspect it just wasn't aimed at 5.4, and that's that, but I'm not sure. In which case presumably reverting bba91cdba612fbce4f8575c5d94d2b146fb83ea3 would be the right fix, not backporting 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048 et al.

Quoted 8 lines

Having looked a bit more through the history, I suspect that the reason 5.6 doesn't need c58c1f83436b501d45d4050fd1296d71a9760bcb - which I have confirmed - is that ext4 was converted to the iomap infrastructure in 5.5, but not in 5.4.

I've confirmed that the repro I shared upthread triggers in 378f32bab3714f04c4e0c3aee4129f6703805550^ but not in 378f32bab3714f04c4e0c3aee4129f6703805550.

I checked up on this, and I do see the issue as well. As far as io_uring is concerned, we don't need that revert in 5.4. So I think the right solution here would be to... revert the revert :-)

Signature · 1 line
Jens Axboe
author maintainer
#112 lore raw

Re: [PATCH 5.4 103/142] Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

Quoted 72 lines · Jens Axboe
Quoted 71 lines · Andres Freund

Hi,

Quoted 54 lines · Jens Axboe
Quoted 53 lines · Greg Kroah-Hartman
Quoted 52 lines · Andres Freund
Quoted 26 lines · Greg Kroah-Hartman
Quoted 26 lines

On v5.4.43-101-gbba91cdba612 this fails with
fio: io_u error on file /mnt/t2/test.0.0: Input/output error: write offset=0, buflen=4096
fio: pid=734, err=5/file:io_u.c:1834, func=io_u error, error=Input/output error

whereas previously it worked. libaio still works...

I haven't checked which major kernel version fixed this again, but I did verify that it's still broken in 5.4.94 and that 5.10.9 works.

I would suspect it's

commit 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048

Author: Jens Axboe <[email protected]>
Date:   2020-06-01 10:00:27 -0600

io_uring: catch -EIO from buffered issue request failure

-EIO bubbles up like -EAGAIN if we fail to allocate a request at the lower level. Play it safe and treat it like -EAGAIN in terms of sync retry, to avoid passing back an errant -EIO.

Catch some of these early for block based file, as non-mq devices generally do not support NOWAIT. That saves us some overhead by not first trying, then retrying from async context. We can go straight to async punt instead.

Quoted 6 lines
Quoted 4 lines

which isn't in stable/linux-5.4.y

Can you test that if the above commit is added, all works well again?

It doesn't apply cleanly, I'll try to resolve the conflict. However, I assume that the revert was for a concrete reason - but I can't quite figure out what b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e was concretely solving, and whether reverting the revert in 5.4 would re-introduce a different problem.

commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e (tag: block-5.7-2020-05-29, linux-block/block-5.7)

Author: Jens Axboe <[email protected]>
Date:   2020-05-28 13:19:29 -0600

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

I suspect it just wasn't aimed at 5.4, and that's that, but I'm not sure. In which case presumably reverting bba91cdba612fbce4f8575c5d94d2b146fb83ea3 would be the right fix, not backporting 4503b7676a2e0abe69c2f2c0d8b03aec53f2f048 et al.

Having looked a bit more through the history, I suspect that the reason 5.6 doesn't need c58c1f83436b501d45d4050fd1296d71a9760bcb - which I have confirmed - is that ext4 was converted to the iomap infrastructure in 5.5, but not in 5.4.

Quoted 7 lines
Quoted 3 lines

I've confirmed that the repro I shared upthread triggers in 378f32bab3714f04c4e0c3aee4129f6703805550^ but not in 378f32bab3714f04c4e0c3aee4129f6703805550.

I checked up on this, and I do see the issue as well. As far as io_uring is concerned, we don't need that revert in 5.4. So I think the right solution here would be to... revert the revert :-)

Thanks for looking at this, I'll go revert the revert now.

greg k-h

author maintainer
#113 lore raw

PATCH 104/142 gpio: fix locking open drain IRQ lines

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

[ Upstream commit e9bdf7e655b9ee81ee912fae1d59df48ce7311b6 ]

We provided the right semantics on open drain lines being by definition output but incidentally the irq set up function would only allow IRQs on lines that were "not output".

Fix the semantics to allow output open drain lines to be used for IRQs.

---
 drivers/gpio/gpiolib.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/gpio/gpiolib.c +9 -2
index a8cf55eb54d8..abdf448b11a3 100644
@@ -3894,7 +3894,9 @@ int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
 		}
 	}
 
-	if (test_bit(FLAG_IS_OUT, &desc->flags)) {
+	/* To be valid for IRQ the line needs to be input or open drain */
+	if (test_bit(FLAG_IS_OUT, &desc->flags) &&
+	    !test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		chip_err(chip,
 			 "%s: tried to flag a GPIO set as output for IRQ\n",
 			 __func__);
@@ -3957,7 +3959,12 @@ void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
 
 	if (!IS_ERR(desc) &&
 	    !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags))) {
-		WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags));
+		/*
+		 * We must not be output when using IRQ UNLESS we are
+		 * open drain.
+		 */
+		WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags) &&
+			!test_bit(FLAG_OPEN_DRAIN, &desc->flags));
 		set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
 	}
 }
Signature · 1 line
2.25.1
author maintainer
#114 lore raw

PATCH 105/142 iommu: Fix reference count leak in iommu_group_alloc.

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 7cc31613734c4870ae32f5265d576ef296621343 ]

kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject.

---
 drivers/iommu/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/iommu.c +1 -1
index cd3c0ea56657..9d7232e26ecf 100644
@@ -492,7 +492,7 @@ struct iommu_group *iommu_group_alloc(void)
 				   NULL, "%d", group->id);
 	if (ret) {
 		ida_simple_remove(&iommu_group_ida, group->id);
-		kfree(group);
+		kobject_put(&group->kobj);
 		return ERR_PTR(ret);
 	}
 
Signature · 1 line
2.25.1
author maintainer
#115 lore raw

PATCH 106/142 parisc: Fix kernel panic in mem_init()

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

[ Upstream commit bf71bc16e02162388808949b179d59d0b571b965 ]

The Debian kernel v5.6 triggers this kernel panic:

 Kernel panic - not syncing: Bad Address (null pointer deref?)
 Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
  IAOQ[0]: mem_init+0xb0/0x150
  IAOQ[1]: mem_init+0xb4/0x150
  RP(r2): start_kernel+0x6c8/0x1190
 Backtrace:
  [<0000000040101ab4>] start_kernel+0x6c8/0x1190
  [<0000000040108574>] start_parisc+0x158/0x1b8

on a HP-PARISC rp3440 machine with this memory layout:
Memory Ranges:
0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB

Fix the crash by avoiding virt_to_page() and similar functions in mem_init() until the memory zones have been fully set up.

---
 arch/parisc/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/parisc/mm/init.c +1 -1
index ddca8287d43b..3e54484797f6 100644
@@ -588,7 +588,7 @@ void __init mem_init(void)
 			> BITS_PER_LONG);
 
 	high_memory = __va((max_pfn << PAGE_SHIFT));
-	set_max_mapnr(page_to_pfn(virt_to_page(high_memory - 1)) + 1);
+	set_max_mapnr(max_low_pfn);
 	memblock_free_all();
 
 #ifdef CONFIG_PA11
Signature · 1 line
2.25.1
author maintainer
#116 lore raw

PATCH 107/142 cfg80211: fix debugfs rename crash

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit 0bbab5f0301587cad4e923ccc49bb910db86162c upstream.

Removing the "if (IS_ERR(dir)) dir = NULL;" check only works if we adjust the remaining code to not rely on it being NULL. Check IS_ERR_OR_NULL() before attempting to dereference it.

I'm not actually entirely sure this fixes the syzbot crash as the kernel config indicates that they do have DEBUG_FS in the kernel, but this is what I found when looking there.

---
 net/wireless/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/wireless/core.c +1 -1
@@ -142,7 +142,7 @@ int cfg80211_dev_rename(struct cfg80211_
 	if (result)
 		return result;
 
-	if (rdev->wiphy.debugfsdir)
+	if (!IS_ERR_OR_NULL(rdev->wiphy.debugfsdir))
 		debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
 			       rdev->wiphy.debugfsdir,
 			       rdev->wiphy.debugfsdir->d_parent, newname);
author maintainer
#117 lore raw

PATCH 108/142 x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"

In reply to Greg Kroah-Hartman

From: Andy Lutomirski <[email protected]>

commit 700d3a5a664df267f01ec8887fd2d8ff98f67e7f upstream.

Revert

45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")

and add a comment to discourage someone else from making the same mistake again.

It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below.

[ bp: Massage and do the same thing in the respective tools/ header. ]

---
 arch/x86/include/uapi/asm/unistd.h       |   11 +++++++++--
 tools/arch/x86/include/uapi/asm/unistd.h |    2 +-
 2 files changed, 10 insertions(+), 3 deletions(-)
arch/x86/include/uapi/asm/unistd.h +9 -2
@@ -2,8 +2,15 @@
 #ifndef _UAPI_ASM_X86_UNISTD_H
 #define _UAPI_ASM_X86_UNISTD_H
 
-/* x32 syscall flag bit */
-#define __X32_SYSCALL_BIT	0x40000000UL
+/*
+ * x32 syscall flag bit.  Some user programs expect syscall NR macros
+ * and __X32_SYSCALL_BIT to have type int, even though syscall numbers
+ * are, for practical purposes, unsigned long.
+ *
+ * Fortunately, expressions like (nr & ~__X32_SYSCALL_BIT) do the right
+ * thing regardless.
+ */
+#define __X32_SYSCALL_BIT	0x40000000
 
 #ifndef __KERNEL__
 # ifdef __i386__
tools/arch/x86/include/uapi/asm/unistd.h +1 -1
@@ -3,7 +3,7 @@
 #define _UAPI_ASM_X86_UNISTD_H
 
 /* x32 syscall flag bit */
-#define __X32_SYSCALL_BIT	0x40000000UL
+#define __X32_SYSCALL_BIT	0x40000000
 
 #ifndef __KERNEL__
 # ifdef __i386__
author maintainer
#118 lore raw

PATCH 109/142 mac80211: mesh: fix discovery timer re-arming issue / crash

In reply to Greg Kroah-Hartman

From: Linus Lüssing <[email protected]>

commit e2d4a80f93fcfaf72e2e20daf6a28e39c3b90677 upstream.

On a non-forwarding 802.11s link between two fairly busy neighboring nodes (iperf with -P 16 at ~850MBit/s TCP; 1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with frequent PREQ retries, usually after around 30-40 seconds the following crash would occur:

[ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000
[ 1110.830786] Mem abort info:
[ 1110.833573]   Exception class = IABT (current EL), IL = 32 bits
[ 1110.839494]   SET = 0, FnV = 0
[ 1110.842546]   EA = 0, S1PTW = 0
[ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000
[ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000
[ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP
[ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common
[ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000)
[ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0
[ 1110.944965] Hardware name: LS1043A RGW Board (DT)
[ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000
[ 1110.955568] PC is at 0x0
[ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78
[ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145
[ 1110.970440] sp : ffff00000801be10
[ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018
[ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0
[ 1110.984352] x25: 0000000000000000 x24: 0000000000000000
[ 1110.989657] x23: dead000000000200 x22: 0000000000000000
[ 1110.994959] x21: 0000000000000000 x20: 0000000000000101
[ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000
[ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058
[ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000
[ 1111.016172] x13: ffff000008916788 x12: 0000000000000040
[ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001
[ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004
[ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8
[ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010
[ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614
[ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000
[ 1111.053290] Call trace:
[ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10)
[ 1111.062158] bcc0:                                   0000000000000000 0000000000000000
[ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0
[ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0
[ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788
[ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0
[ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000
[ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000
[ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10
[ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145
[ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8
[ 1111.140353] be00: ffff00000801be10 0000000000000000
[ 1111.145220] [<          (null)>]           (null)
[ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398
[ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc
[ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8
[ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0
[ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0
[ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70)
[ 1111.183642] be20:                                   0000000000000020 0000000000000000
[ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000
[ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0
[ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000
[ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0
[ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000
[ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000
[ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70
[ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145
[ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574
[ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0
[ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c
[ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18
[ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8
[ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28
[ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110
[ 1111.293662] Code: bad PC value
[ 1111.296710] ---[ end trace 555b6ca4363c3edd ]---
[ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt
[ 1111.307661] SMP: stopping secondary CPUs
[ 1111.311574] Kernel Offset: disabled
[ 1111.315053] CPU features: 0x0002000
[ 1111.318530] Memory Limit: none
[ 1111.321575] Rebooting in 3 seconds..

With some added debug output / delays we were able to push the crash from the timer callback runner into the callback function and by that shedding some light on which object holding the timer gets corrupted:

[  401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868
[...]
[  402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48
[  402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211]
[  402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78
[  402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398
[  402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc
[  402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8
[  402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0
[  402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0

The issue happens due to the following sequence of events:

1) mesh_path_start_discovery():
-> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx()

2) mesh_path_free_rcu()
-> del_timer_sync(&mpath->timer)
[...]
-> kfree_rcu(mpath)

3) mesh_path_start_discovery():
-> mod_timer(&mpath->timer, ...)
[...]
-> rcu_read_unlock()

4) mesh_path_free_rcu()'s kfree_rcu():
-> kfree(mpath)

5) mesh_path_timer() starts after timeout, using freed mpath object

So a use-after-free issue due to a timer re-arming bug caused by an early spin-unlocking.

This patch fixes this issue by re-checking if mpath is about to be free'd and if so bails out of re-arming the timer.

Fixes 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Cc Simon Wunderlich <[email protected]>
---
 net/mac80211/mesh_hwmp.c |    7 +++++++
 1 file changed, 7 insertions(+)
net/mac80211/mesh_hwmp.c +7 -0
@@ -1103,7 +1103,14 @@ void mesh_path_start_discovery(struct ie
 	mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->vif.addr, ifmsh->sn,
 			       target_flags, mpath->dst, mpath->sn, da, 0,
 			       ttl, lifetime, 0, ifmsh->preq_id++, sdata);
+
+	spin_lock_bh(&mpath->state_lock);
+	if (mpath->flags & MESH_PATH_DELETED) {
+		spin_unlock_bh(&mpath->state_lock);
+		goto enddiscovery;
+	}
 	mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout);
+	spin_unlock_bh(&mpath->state_lock);
 
 enddiscovery:
 	rcu_read_unlock();
author maintainer
#119 lore raw

PATCH 110/142 x86/dma: Fix max PFN arithmetic overflow on 32 bit systems

In reply to Greg Kroah-Hartman

From: Alexander Dahl <[email protected]>

commit 88743470668ef5eb6b7ba9e0f99888e5999bf172 upstream.

The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is 4 294 967 296 or 0x100000000 which is no problem on 64 bit systems. The patch does not change the later overall result of 0x100000 for MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new calculation yields the same result, but does not require 64 bit arithmetic.

On 32 bit systems the old calculation suffers from an arithmetic overflow in that intermediate term in braces: 4UL aka unsigned long int is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does not fit in 4 bytes), the in braces result is truncated to zero, the following right shift does not alter that, so MAX_DMA32_PFN evaluates to 0 on 32 bit systems.

That wrong value is a problem in a comparision against MAX_DMA32_PFN in the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if swiotlb should be active. That comparison yields the opposite result, when compiling on 32 bit systems.

This was not possible before

1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")

when that MAX_DMA32_PFN was first made visible to x86_32 (and which landed in v3.0).

In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on x86-32.

However if one has set CONFIG_IOMMU_INTEL, since

c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")

there's a dependency on CONFIG_SWIOTLB, which was not necessarily active before. That landed in v5.4, where we noticed it in the fli4l Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64 bit kernel configs there (I could not find out why, so let's just say historical reasons).

The effect is at boot time 64 MiB (default size) were allocated for bounce buffers now, which is a noticeable amount of memory on small systems like pcengines ALIX 2D3 with 256 MiB memory, which are still frequently used as home routers.

We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4 (LTS) in fli4l and got that kernel messages for example:

Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
…
Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem) …
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)

The initial analysis and the suggested fix was done by user 'sourcejedi' at stackoverflow and explicitly marked as GPLv2 for inclusion in the Linux kernel:

https://unix.stackexchange.com/a/520525/50007

The new calculation, which does not suffer from that overflow, is the same as for arch/mips now as suggested by Robin Murphy.

The fix was tested by fli4l users on round about two dozen different systems, including both 32 and 64 bit archs, bare metal and virtualized machines.

[ bp: Massage commit message. ]

---
 arch/x86/include/asm/dma.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/include/asm/dma.h +1 -1
@@ -74,7 +74,7 @@
 #define MAX_DMA_PFN   ((16UL * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
-#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
+#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT))
 
 #ifdef CONFIG_X86_32
 /* The maximum address that we can perform a DMA transfer to on this platform */
author maintainer
#120 lore raw

PATCH 111/142 copy_xstate_to_kernel(): dont leave parts of destination uninitialized

In reply to Greg Kroah-Hartman

From: Al Viro <[email protected]>

commit 9e4636545933131de15e1ecd06733538ae939b2f upstream.

copy the corresponding pieces of init_fpstate into the gaps instead.

---
 arch/x86/kernel/fpu/xstate.c |   86 ++++++++++++++++++++++++-------------------
 1 file changed, 48 insertions(+), 38 deletions(-)
arch/x86/kernel/fpu/xstate.c +48 -38
@@ -952,18 +952,31 @@ static inline bool xfeatures_mxcsr_quirk
 	return true;
 }
 
-/*
- * This is similar to user_regset_copyout(), but will not add offset to
- * the source data pointer or increment pos, count, kbuf, and ubuf.
- */
-static inline void
-__copy_xstate_to_kernel(void *kbuf, const void *data,
-			unsigned int offset, unsigned int size, unsigned int size_total)
+static void fill_gap(unsigned to, void **kbuf, unsigned *pos, unsigned *count)
 {
-	if (offset < size_total) {
-		unsigned int copy = min(size, size_total - offset);
+	if (*pos < to) {
+		unsigned size = to - *pos;
+
+		if (size > *count)
+			size = *count;
+		memcpy(*kbuf, (void *)&init_fpstate.xsave + *pos, size);
+		*kbuf += size;
+		*pos += size;
+		*count -= size;
+	}
+}
 
-		memcpy(kbuf + offset, data, copy);
+static void copy_part(unsigned offset, unsigned size, void *from,
+			void **kbuf, unsigned *pos, unsigned *count)
+{
+	fill_gap(offset, kbuf, pos, count);
+	if (size > *count)
+		size = *count;
+	if (size) {
+		memcpy(*kbuf, from, size);
+		*kbuf += size;
+		*pos += size;
+		*count -= size;
 	}
 }
 
@@ -976,8 +989,9 @@ __copy_xstate_to_kernel(void *kbuf, cons
  */
 int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int offset_start, unsigned int size_total)
 {
-	unsigned int offset, size;
 	struct xstate_header header;
+	const unsigned off_mxcsr = offsetof(struct fxregs_state, mxcsr);
+	unsigned count = size_total;
 	int i;
 
 	/*
@@ -993,46 +1007,42 @@ int copy_xstate_to_kernel(void *kbuf, st
 	header.xfeatures = xsave->header.xfeatures;
 	header.xfeatures &= ~XFEATURE_MASK_SUPERVISOR;
 
+	if (header.xfeatures & XFEATURE_MASK_FP)
+		copy_part(0, off_mxcsr,
+			  &xsave->i387, &kbuf, &offset_start, &count);
+	if (header.xfeatures & (XFEATURE_MASK_SSE | XFEATURE_MASK_YMM))
+		copy_part(off_mxcsr, MXCSR_AND_FLAGS_SIZE,
+			  &xsave->i387.mxcsr, &kbuf, &offset_start, &count);
+	if (header.xfeatures & XFEATURE_MASK_FP)
+		copy_part(offsetof(struct fxregs_state, st_space), 128,
+			  &xsave->i387.st_space, &kbuf, &offset_start, &count);
+	if (header.xfeatures & XFEATURE_MASK_SSE)
+		copy_part(xstate_offsets[XFEATURE_MASK_SSE], 256,
+			  &xsave->i387.xmm_space, &kbuf, &offset_start, &count);
+	/*
+	 * Fill xsave->i387.sw_reserved value for ptrace frame:
+	 */
+	copy_part(offsetof(struct fxregs_state, sw_reserved), 48,
+		  xstate_fx_sw_bytes, &kbuf, &offset_start, &count);
 	/*
 	 * Copy xregs_state->header:
 	 */
-	offset = offsetof(struct xregs_state, header);
-	size = sizeof(header);
-
-	__copy_xstate_to_kernel(kbuf, &header, offset, size, size_total);
+	copy_part(offsetof(struct xregs_state, header), sizeof(header),
+		  &header, &kbuf, &offset_start, &count);
 
-	for (i = 0; i < XFEATURE_MAX; i++) {
+	for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) {
 		/*
 		 * Copy only in-use xstates:
 		 */
 		if ((header.xfeatures >> i) & 1) {
 			void *src = __raw_xsave_addr(xsave, i);
 
-			offset = xstate_offsets[i];
-			size = xstate_sizes[i];
-
-			/* The next component has to fit fully into the output buffer: */
-			if (offset + size > size_total)
-				break;
-
-			__copy_xstate_to_kernel(kbuf, src, offset, size, size_total);
+			copy_part(xstate_offsets[i], xstate_sizes[i],
+				  src, &kbuf, &offset_start, &count);
 		}
 
 	}
-
-	if (xfeatures_mxcsr_quirk(header.xfeatures)) {
-		offset = offsetof(struct fxregs_state, mxcsr);
-		size = MXCSR_AND_FLAGS_SIZE;
-		__copy_xstate_to_kernel(kbuf, &xsave->i387.mxcsr, offset, size, size_total);
-	}
-
-	/*
-	 * Fill xsave->i387.sw_reserved value for ptrace frame:
-	 */
-	offset = offsetof(struct fxregs_state, sw_reserved);
-	size = sizeof(xstate_fx_sw_bytes);
-
-	__copy_xstate_to_kernel(kbuf, xstate_fx_sw_bytes, offset, size, size_total);
+	fill_gap(size_total, &kbuf, &offset_start, &count);
 
 	return 0;
 }
author maintainer
#121 lore raw

PATCH 112/142 xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit afcaf61be9d1dbdee5ec186d1dcc67b6b692180f upstream.

For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be:

----------------------------------------------------
| outer | | dest | | | ESP | ESP |
| IP hdr | ESP | opts.| TCP | Data | Trailer | ICV |
----------------------------------------------------

The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped.

I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/xfrm/xfrm_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/xfrm/xfrm_input.c +1 -1
@@ -643,7 +643,7 @@ resume:
 		dev_put(skb->dev);
 
 		spin_lock(&x->lock);
-		if (nexthdr <= 0) {
+		if (nexthdr < 0) {
 			if (nexthdr == -EBADMSG) {
 				xfrm_audit_state_icvfail(x, skb,
 							 x->type->proto);
author maintainer
#122 lore raw

PATCH 113/142 xfrm: do pskb_pull properly in __xfrm_transport_prep

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit 06a0afcfe2f551ff755849ea2549b0d8409fd9a0 upstream.

For transport mode, when ipv6 nexthdr is set, the packet format might be like:

----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------

and in __xfrm_transport_prep():

  pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len);

it will pull the data pointer to the wrong position, as it missed the nexthdrs/dest opts.

This patch is to fix it by using:

  pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len);

as we can be sure transport_header points to ESP header at that moment.

It also fixes a panic when packets with ipv6 nexthdr are sent over esp6 transport mode:

  [  100.473845] kernel BUG at net/core/skbuff.c:4325!
  [  100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260
  [  100.494355] Call Trace:
  [  100.494829]  skb_to_sgvec+0x11/0x40
  [  100.495492]  esp6_output_tail+0x12e/0x550 [esp6]
  [  100.496358]  esp6_xmit+0x1d5/0x260 [esp6_offload]
  [  100.498029]  validate_xmit_xfrm+0x22f/0x2e0
  [  100.499604]  __dev_queue_xmit+0x589/0x910
  [  100.502928]  ip6_finish_output2+0x2a5/0x5a0
  [  100.503718]  ip6_output+0x6c/0x120
  [  100.505198]  xfrm_output_resume+0x4bf/0x530
  [  100.508683]  xfrm6_output+0x3a/0xc0
  [  100.513446]  inet6_csk_xmit+0xa1/0xf0
  [  100.517335]  tcp_sendmsg+0x27/0x40
  [  100.517977]  sock_sendmsg+0x3e/0x60
  [  100.518648]  __sys_sendto+0xee/0x160
Fixes c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
---
 net/xfrm/xfrm_device.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
net/xfrm/xfrm_device.c +3 -5
@@ -25,12 +25,10 @@ static void __xfrm_transport_prep(struct
 	struct xfrm_offload *xo = xfrm_offload(skb);
 
 	skb_reset_mac_len(skb);
-	pskb_pull(skb, skb->mac_len + hsize + x->props.header_len);
-
-	if (xo->flags & XFRM_GSO_SEGMENT) {
-		skb_reset_transport_header(skb);
+	if (xo->flags & XFRM_GSO_SEGMENT)
 		skb->transport_header -= x->props.header_len;
-	}
+
+	pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len);
 }
 
 static void __xfrm_mode_tunnel_prep(struct xfrm_state *x, struct sk_buff *skb,
author maintainer
#123 lore raw

PATCH 114/142 xfrm: remove the xfrm_state_put call becofe going to out_reset

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit db87668ad1e4917cfe04e217307ba6ed9390716e upstream.

This xfrm_state_put call in esp4/6_gro_receive() will cause double put for state, as in out_reset path secpath_reset() will put all states set in skb sec_path.

So fix it by simply remove the xfrm_state_put call.

Fixes 6ed69184ed9c ("xfrm: Reset secpath in xfrm failure")
---
 net/ipv4/esp4_offload.c |    4 +---
 net/ipv6/esp6_offload.c |    4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)
net/ipv4/esp4_offload.c +1 -3
@@ -63,10 +63,8 @@ static struct sk_buff *esp4_gro_receive(
 		sp->olen++;
 
 		xo = xfrm_offload(skb);
-		if (!xo) {
-			xfrm_state_put(x);
+		if (!xo)
 			goto out_reset;
-		}
 	}
 
 	xo->flags |= XFRM_GRO;
net/ipv6/esp6_offload.c +1 -3
@@ -85,10 +85,8 @@ static struct sk_buff *esp6_gro_receive(
 		sp->olen++;
 
 		xo = xfrm_offload(skb);
-		if (!xo) {
-			xfrm_state_put(x);
+		if (!xo)
 			goto out_reset;
-		}
 	}
 
 	xo->flags |= XFRM_GRO;
author maintainer
#124 lore raw

PATCH 115/142 xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit a204aef9fd77dce1efd9066ca4e44eede99cd858 upstream.

An use-after-free crash can be triggered when sending big packets over vxlan over esp with esp offload enabled:

[] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] Call Trace:

  []  dump_stack+0x75/0xa0
  []  kasan_report+0x37/0x50
  []  ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
  []  ipv6_gso_segment+0x2c8/0x13c0
  []  skb_mac_gso_segment+0x1cb/0x420
  []  skb_udp_tunnel_segment+0x6b5/0x1c90
  []  inet_gso_segment+0x440/0x1380
  []  skb_mac_gso_segment+0x1cb/0x420
  []  esp4_gso_segment+0xae8/0x1709 [esp4_offload]
  []  inet_gso_segment+0x440/0x1380
  []  skb_mac_gso_segment+0x1cb/0x420
  []  __skb_gso_segment+0x2d7/0x5f0
  []  validate_xmit_skb+0x527/0xb10
  []  __dev_queue_xmit+0x10f8/0x2320 <---
  []  ip_finish_output2+0xa2e/0x1b50
  []  ip_output+0x1a8/0x2f0
  []  xfrm_output_resume+0x110e/0x15f0
  []  __xfrm4_output+0xe1/0x1b0
  []  xfrm4_output+0xa0/0x200
  []  iptunnel_xmit+0x5a7/0x920
  []  vxlan_xmit_one+0x1658/0x37a0 [vxlan]
  []  vxlan_xmit+0x5e4/0x3ec8 [vxlan]
  []  dev_hard_start_xmit+0x125/0x540
  []  __dev_queue_xmit+0x17bd/0x2320  <---
  []  ip6_finish_output2+0xb20/0x1b80
  []  ip6_output+0x1b3/0x390
  []  ip6_xmit+0xb82/0x17e0
  []  inet6_csk_xmit+0x225/0x3d0
  []  __tcp_transmit_skb+0x1763/0x3520
  []  tcp_write_xmit+0xd64/0x5fe0
  []  __tcp_push_pending_frames+0x8c/0x320
  []  tcp_sendmsg_locked+0x2245/0x3500
  []  tcp_sendmsg+0x27/0x40

As on the tx path of vxlan over esp, skb->inner_network_header would be set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can overwrite the former one. It causes skb_udp_tunnel_segment() to use a wrong skb->inner_network_header, then the issue occurs.

This patch is to fix it by calling xfrm_output_gso() instead when the inner_protocol is set, in which gso_segment of inner_protocol will be done first.

While at it, also improve some code around.

Fixes 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
---
 net/xfrm/xfrm_output.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
net/xfrm/xfrm_output.c +7 -5
@@ -586,18 +586,20 @@ int xfrm_output(struct sock *sk, struct
 		xfrm_state_hold(x);
 
 		if (skb_is_gso(skb)) {
-			skb_shinfo(skb)->gso_type |= SKB_GSO_ESP;
+			if (skb->inner_protocol)
+				return xfrm_output_gso(net, sk, skb);
 
-			return xfrm_output2(net, sk, skb);
+			skb_shinfo(skb)->gso_type |= SKB_GSO_ESP;
+			goto out;
 		}
 
 		if (x->xso.dev && x->xso.dev->features & NETIF_F_HW_ESP_TX_CSUM)
 			goto out;
+	} else {
+		if (skb_is_gso(skb))
+			return xfrm_output_gso(net, sk, skb);
 	}
 
-	if (skb_is_gso(skb))
-		return xfrm_output_gso(net, sk, skb);
-
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		err = skb_checksum_help(skb);
 		if (err) {
author maintainer
#125 lore raw

PATCH 116/142 xfrm interface: fix oops when deleting a x-netns interface

In reply to Greg Kroah-Hartman

From: Nicolas Dichtel <[email protected]>

commit c95c5f58b35ef995f66cb55547eee6093ab5fcb8 upstream.

Here is the steps to reproduce the problem:
ip netns add foo
ip netns add bar
ip -n foo link add xfrmi0 type xfrm dev lo if_id 42 ip -n foo link set xfrmi0 netns bar
ip netns del foo
ip netns del bar

Which results to:

[  186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI
[  186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1
[  186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[  186.689420] Workqueue: netns cleanup_net
[  186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface]
[  186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08
[  186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286
[  186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0
[  186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000
[  186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040
[  186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80
[  186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8
[  186.697738] FS:  0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000
[  186.698705] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0
[  186.700221] Call Trace:
[  186.700508]  rollback_registered_many+0x32b/0x3fd
[  186.701058]  ? __rtnl_unlock+0x20/0x3d
[  186.701494]  ? arch_local_irq_save+0x11/0x17
[  186.702012]  unregister_netdevice_many+0x12/0x55
[  186.702594]  default_device_exit_batch+0x12b/0x150
[  186.703160]  ? prepare_to_wait_exclusive+0x60/0x60
[  186.703719]  cleanup_net+0x17d/0x234
[  186.704138]  process_one_work+0x196/0x2e8
[  186.704652]  worker_thread+0x1a4/0x249
[  186.705087]  ? cancel_delayed_work+0x92/0x92
[  186.705620]  kthread+0x105/0x10f
[  186.706000]  ? __kthread_bind_mask+0x57/0x57
[  186.706501]  ret_from_fork+0x35/0x40
[  186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy
[  186.710423] ---[ end trace 463bba18105537e5 ]---

The problem is that x-netns xfrm interface are not removed when the link netns is removed. This causes later this oops when thoses interfaces are removed.

Let's add a handler to remove all interfaces related to a netns when this netns is removed.

Fixes f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
---
 net/xfrm/xfrm_interface.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
net/xfrm/xfrm_interface.c +21 -0
@@ -772,7 +772,28 @@ static void __net_exit xfrmi_exit_net(st
 	rtnl_unlock();
 }
 
+static void __net_exit xfrmi_exit_batch_net(struct list_head *net_exit_list)
+{
+	struct net *net;
+	LIST_HEAD(list);
+
+	rtnl_lock();
+	list_for_each_entry(net, net_exit_list, exit_list) {
+		struct xfrmi_net *xfrmn = net_generic(net, xfrmi_net_id);
+		struct xfrm_if __rcu **xip;
+		struct xfrm_if *xi;
+
+		for (xip = &xfrmn->xfrmi[0];
+		     (xi = rtnl_dereference(*xip)) != NULL;
+		     xip = &xi->next)
+			unregister_netdevice_queue(xi->dev, &list);
+	}
+	unregister_netdevice_many(&list);
+	rtnl_unlock();
+}
+
 static struct pernet_operations xfrmi_net_ops = {
+	.exit_batch = xfrmi_exit_batch_net,
 	.exit = xfrmi_exit_net,
 	.id   = &xfrmi_net_id,
 	.size = sizeof(struct xfrmi_net),
author maintainer
#126 lore raw

PATCH 117/142 xfrm: fix a warning in xfrm_policy_insert_list

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit ed17b8d377eaf6b4a01d46942b4c647378a79bdd upstream.

This waring can be triggered simply by:

  # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
    priority 1 mark 0 mask 0x10  #[1]
  # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
    priority 2 mark 0 mask 0x1   #[2]
  # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
    priority 2 mark 0 mask 0x10  #[3]

Then dmesg shows:

[ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace:

  [ ]  xfrm_policy_inexact_insert+0x85/0xe50
  [ ]  xfrm_policy_insert+0x4ba/0x680
  [ ]  xfrm_add_policy+0x246/0x4d0
  [ ]  xfrm_user_rcv_msg+0x331/0x5c0
  [ ]  netlink_rcv_skb+0x121/0x350
  [ ]  xfrm_netlink_rcv+0x66/0x80
  [ ]  netlink_unicast+0x439/0x630
  [ ]  netlink_sendmsg+0x714/0xbf0
  [ ]  sock_sendmsg+0xe2/0x110

The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities.

However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list().

This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match().

Thanks to Yuehaibing, we could make this fix better.

v1->v2:
- check policy->mark.v == pol->mark.v only without mask.

Fixes 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities")
---
 net/xfrm/xfrm_policy.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
net/xfrm/xfrm_policy.c +1 -6
@@ -1433,12 +1433,7 @@ static void xfrm_policy_requeue(struct x
 static bool xfrm_policy_mark_match(struct xfrm_policy *policy,
 				   struct xfrm_policy *pol)
 {
-	u32 mark = policy->mark.v & policy->mark.m;
-
-	if (policy->mark.v == pol->mark.v && policy->mark.m == pol->mark.m)
-		return true;
-
-	if ((mark & pol->mark.m) == pol->mark.v &&
+	if (policy->mark.v == pol->mark.v &&
 	    policy->priority == pol->priority)
 		return true;
 
author maintainer
#127 lore raw

PATCH 118/142 xfrm: fix a NULL-ptr deref in xfrm_local_error

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit f6a23d85d078c2ffde79c66ca81d0a1dde451649 upstream.

This patch is to fix a crash:

[ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI
[ ] RIP: 0010:ipv6_local_error+0xac/0x7a0
[ ] Call Trace:

  [ ]  xfrm6_local_error+0x1eb/0x300
  [ ]  xfrm_local_error+0x95/0x130
  [ ]  __xfrm6_output+0x65f/0xb50
  [ ]  xfrm6_output+0x106/0x46f
  [ ]  udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel]
  [ ]  vxlan_xmit_one+0xbc6/0x2c60 [vxlan]
  [ ]  vxlan_xmit+0x6a0/0x4276 [vxlan]
  [ ]  dev_hard_start_xmit+0x165/0x820
  [ ]  __dev_queue_xmit+0x1ff0/0x2b90
  [ ]  ip_finish_output2+0xd3e/0x1480
  [ ]  ip_do_fragment+0x182d/0x2210
  [ ]  ip_output+0x1d0/0x510
  [ ]  ip_send_skb+0x37/0xa0
  [ ]  raw_sendmsg+0x1b4c/0x2b80
  [ ]  sock_sendmsg+0xc0/0x110

This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk.

This issue was actually fixed by Commit 628e341f319f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d48746e4b ("xfrm: choose protocol family by skb protocol").

So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.

Fixes 844d48746e4b ("xfrm: choose protocol family by skb protocol")
---
 net/xfrm/xfrm_output.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/xfrm/xfrm_output.c +2 -1
@@ -645,7 +645,8 @@ void xfrm_local_error(struct sk_buff *sk
 
 	if (skb->protocol == htons(ETH_P_IP))
 		proto = AF_INET;
-	else if (skb->protocol == htons(ETH_P_IPV6))
+	else if (skb->protocol == htons(ETH_P_IPV6) &&
+		 skb->sk->sk_family == AF_INET6)
 		proto = AF_INET6;
 	else
 		return;
author maintainer
#128 lore raw

PATCH 119/142 xfrm: fix error in comment

In reply to Greg Kroah-Hartman

From: Antony Antony <[email protected]>

commit 29e4276667e24ee6b91d9f91064d8fda9a210ea1 upstream.

s/xfrm_state_offload/xfrm_user_offload/

Fixes d77e38e612a ("xfrm: Add an IPsec hardware offloading API")
---
 include/uapi/linux/xfrm.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/uapi/linux/xfrm.h +1 -1
@@ -304,7 +304,7 @@ enum xfrm_attr_type_t {
 	XFRMA_PROTO,		/* __u8 */
 	XFRMA_ADDRESS_FILTER,	/* struct xfrm_address_filter */
 	XFRMA_PAD,
-	XFRMA_OFFLOAD_DEV,	/* struct xfrm_state_offload */
+	XFRMA_OFFLOAD_DEV,	/* struct xfrm_user_offload */
 	XFRMA_SET_MARK,		/* __u32 */
 	XFRMA_SET_MARK_MASK,	/* __u32 */
 	XFRMA_IF_ID,		/* __u32 */
author maintainer
#129 lore raw

PATCH 120/142 ip_vti: receive ipip packet by calling ip_tunnel_rcv

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit 976eba8ab596bab94b9714cd46d38d5c6a2c660d upstream.

In Commit dd9ee3444014 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel"), it tries to receive IPIP packets in vti by calling xfrm_input(). This case happens when a small packet or frag sent by peer is too small to get compressed.

However, xfrm_input() will still get to the IPCOMP path where skb sec_path is set, but never dropped while it should have been done in vti_ipcomp4_protocol.cb_handler(vti_rcv_cb), as it's not an ipcomp4 packet. This will cause that the packet can never pass xfrm4_policy_check() in the upper protocol rcv functions.

So this patch is to call ip_tunnel_rcv() to process IPIP packets instead.

Fixes dd9ee3444014 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
---
 net/ipv4/ip_vti.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)
net/ipv4/ip_vti.c +22 -1
@@ -93,7 +93,28 @@ static int vti_rcv_proto(struct sk_buff
 
 static int vti_rcv_tunnel(struct sk_buff *skb)
 {
-	return vti_rcv(skb, ip_hdr(skb)->saddr, true);
+	struct ip_tunnel_net *itn = net_generic(dev_net(skb->dev), vti_net_id);
+	const struct iphdr *iph = ip_hdr(skb);
+	struct ip_tunnel *tunnel;
+
+	tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
+				  iph->saddr, iph->daddr, 0);
+	if (tunnel) {
+		struct tnl_ptk_info tpi = {
+			.proto = htons(ETH_P_IP),
+		};
+
+		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+			goto drop;
+		if (iptunnel_pull_header(skb, 0, tpi.proto, false))
+			goto drop;
+		return ip_tunnel_rcv(tunnel, skb, &tpi, NULL, false);
+	}
+
+	return -EINVAL;
+drop:
+	kfree_skb(skb);
+	return 0;
 }
 
 static int vti_rcv_cb(struct sk_buff *skb, int err)
author maintainer
#130 lore raw

PATCH 121/142 netfilter: nft_reject_bridge: enable reject with bridge vlan

In reply to Greg Kroah-Hartman

From: Michael Braun <[email protected]>

commit e9c284ec4b41c827f4369973d2792992849e4fa5 upstream.

Currently, using the bridge reject target with tagged packets results in untagged packets being sent back.

Fix this by mirroring the vlan id as well.

Fixes 85f5b3086a04 ("netfilter: bridge: add reject support")
---
 net/bridge/netfilter/nft_reject_bridge.c |    6 ++++++
 1 file changed, 6 insertions(+)
net/bridge/netfilter/nft_reject_bridge.c +6 -0
@@ -31,6 +31,12 @@ static void nft_reject_br_push_etherhdr(
 	ether_addr_copy(eth->h_dest, eth_hdr(oldskb)->h_source);
 	eth->h_proto = eth_hdr(oldskb)->h_proto;
 	skb_pull(nskb, ETH_HLEN);
+
+	if (skb_vlan_tag_present(oldskb)) {
+		u16 vid = skb_vlan_tag_get(oldskb);
+
+		__vlan_hwaccel_put_tag(nskb, oldskb->vlan_proto, vid);
+	}
 }
 
 static int nft_bridge_iphdr_validate(struct sk_buff *skb)
author maintainer
#131 lore raw

PATCH 122/142 netfilter: ipset: Fix subcounter update skip

In reply to Greg Kroah-Hartman

From: Phil Sutter <[email protected]>

commit a164b95ad6055c50612795882f35e0efda1f1390 upstream.

If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE must be set, not unset.

Fixes 6e01781d1c80e ("netfilter: ipset: set match: add support to match the counters")
---
 net/netfilter/ipset/ip_set_list_set.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/ipset/ip_set_list_set.c +1 -1
@@ -59,7 +59,7 @@ list_set_ktest(struct ip_set *set, const
 	/* Don't lookup sub-counters at all */
 	opt->cmdflags &= ~IPSET_FLAG_MATCH_COUNTERS;
 	if (opt->cmdflags & IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE)
-		opt->cmdflags &= ~IPSET_FLAG_SKIP_COUNTER_UPDATE;
+		opt->cmdflags |= IPSET_FLAG_SKIP_COUNTER_UPDATE;
 	list_for_each_entry_rcu(e, &map->members, list) {
 		ret = ip_set_test(e->id, skb, par, opt);
 		if (ret <= 0)
author maintainer
#132 lore raw

PATCH 123/142 netfilter: conntrack: make conntrack userspace helpers work again

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

commit ee04805ff54a63ffd90bc6749ebfe73473734ddb upstream.

Florian Westphal says:

"Problem is that after the helper hook was merged back into the confirm one, the queueing itself occurs from the confirm hook, i.e. we queue from the last netfilter callback in the hook-list.

Therefore, on return, the packet bypasses the confirm action and the connection is never committed to the main conntrack table.

To fix this there are several ways:
1. revert the 'Fixes' commit and have a extra helper hook again. Works, but has the drawback of adding another indirect call for everyone.

2. Special case this: split the hooks only when userspace helper gets added, so queueing occurs at a lower priority again, and normal enqueue reinject would eventually call the last hook.

3. Extend the existing nf_queue ct update hook to allow a forced confirmation (plus run the seqadj code).

This goes for 3)."

Fixes 827318feb69cb ("netfilter: conntrack: remove helper hook again")
---
 net/netfilter/nf_conntrack_core.c |   78 +++++++++++++++++++++++++++++++++++---
 1 file changed, 72 insertions(+), 6 deletions(-)
net/netfilter/nf_conntrack_core.c +72 -6
@@ -1879,22 +1879,18 @@ static void nf_conntrack_attach(struct s
 	nf_conntrack_get(skb_nfct(nskb));
 }
 
-static int nf_conntrack_update(struct net *net, struct sk_buff *skb)
+static int __nf_conntrack_update(struct net *net, struct sk_buff *skb,
+				 struct nf_conn *ct)
 {
 	struct nf_conntrack_tuple_hash *h;
 	struct nf_conntrack_tuple tuple;
 	enum ip_conntrack_info ctinfo;
 	struct nf_nat_hook *nat_hook;
 	unsigned int status;
-	struct nf_conn *ct;
 	int dataoff;
 	u16 l3num;
 	u8 l4num;
 
-	ct = nf_ct_get(skb, &ctinfo);
-	if (!ct || nf_ct_is_confirmed(ct))
-		return 0;
-
 	l3num = nf_ct_l3num(ct);
 
 	dataoff = get_l4proto(skb, skb_network_offset(skb), l3num, &l4num);
@@ -1951,6 +1947,76 @@ static int nf_conntrack_update(struct ne
 	return 0;
 }
 
+/* This packet is coming from userspace via nf_queue, complete the packet
+ * processing after the helper invocation in nf_confirm().
+ */
+static int nf_confirm_cthelper(struct sk_buff *skb, struct nf_conn *ct,
+			       enum ip_conntrack_info ctinfo)
+{
+	const struct nf_conntrack_helper *helper;
+	const struct nf_conn_help *help;
+	unsigned int protoff;
+
+	help = nfct_help(ct);
+	if (!help)
+		return 0;
+
+	helper = rcu_dereference(help->helper);
+	if (!(helper->flags & NF_CT_HELPER_F_USERSPACE))
+		return 0;
+
+	switch (nf_ct_l3num(ct)) {
+	case NFPROTO_IPV4:
+		protoff = skb_network_offset(skb) + ip_hdrlen(skb);
+		break;
+#if IS_ENABLED(CONFIG_IPV6)
+	case NFPROTO_IPV6: {
+		__be16 frag_off;
+		u8 pnum;
+
+		pnum = ipv6_hdr(skb)->nexthdr;
+		protoff = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &pnum,
+					   &frag_off);
+		if (protoff < 0 || (frag_off & htons(~0x7)) != 0)
+			return 0;
+		break;
+	}
+#endif
+	default:
+		return 0;
+	}
+
+	if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status) &&
+	    !nf_is_loopback_packet(skb)) {
+		if (!nf_ct_seq_adjust(skb, ct, ctinfo, protoff)) {
+			NF_CT_STAT_INC_ATOMIC(nf_ct_net(ct), drop);
+			return -1;
+		}
+	}
+
+	/* We've seen it coming out the other side: confirm it */
+	return nf_conntrack_confirm(skb) == NF_DROP ? - 1 : 0;
+}
+
+static int nf_conntrack_update(struct net *net, struct sk_buff *skb)
+{
+	enum ip_conntrack_info ctinfo;
+	struct nf_conn *ct;
+	int err;
+
+	ct = nf_ct_get(skb, &ctinfo);
+	if (!ct)
+		return 0;
+
+	if (!nf_ct_is_confirmed(ct)) {
+		err = __nf_conntrack_update(net, skb, ct);
+		if (err < 0)
+			return err;
+	}
+
+	return nf_confirm_cthelper(skb, ct, ctinfo);
+}
+
 static bool nf_conntrack_get_tuple_skb(struct nf_conntrack_tuple *dst_tuple,
 				       const struct sk_buff *skb)
 {
author maintainer
#133 lore raw

PATCH 124/142 netfilter: nfnetlink_cthelper: unbreak userspace helper support

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

commit 703acd70f2496537457186211c2f03e792409e68 upstream.

Restore helper data size initialization and fix memcopy of the helper data size.

Fixes 157ffffeb5dc ("netfilter: nfnetlink_cthelper: reject too large userspace allocation requests")
---
 net/netfilter/nfnetlink_cthelper.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/netfilter/nfnetlink_cthelper.c +2 -1
@@ -103,7 +103,7 @@ nfnl_cthelper_from_nlattr(struct nlattr
 	if (help->helper->data_len == 0)
 		return -EINVAL;
 
-	nla_memcpy(help->data, nla_data(attr), sizeof(help->data));
+	nla_memcpy(help->data, attr, sizeof(help->data));
 	return 0;
 }
 
@@ -240,6 +240,7 @@ nfnl_cthelper_create(const struct nlattr
 		ret = -ENOMEM;
 		goto err2;
 	}
+	helper->data_len = size;
 
 	helper->flags |= NF_CT_HELPER_F_USERSPACE;
 	memcpy(&helper->tuple, tuple, sizeof(struct nf_conntrack_tuple));
author maintainer
#134 lore raw

PATCH 125/142 netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

commit 4c559f15efcc43b996f4da528cd7f9483aaca36d upstream.

Dan Carpenter says: "Smatch complains that the value for "cmd" comes from the network and can't be trusted."

Add pptp_msg_name() helper function that checks for the array boundary.

Fixes f09943fefe6b ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port")
---
 include/linux/netfilter/nf_conntrack_pptp.h |    2 
 net/ipv4/netfilter/nf_nat_pptp.c            |    7 ---
 net/netfilter/nf_conntrack_pptp.c           |   62 +++++++++++++++-------------
 3 files changed, 38 insertions(+), 33 deletions(-)
include/linux/netfilter/nf_conntrack_pptp.h +1 -1
@@ -10,7 +10,7 @@
 #include <net/netfilter/nf_conntrack_expect.h>
 #include <uapi/linux/netfilter/nf_conntrack_tuple_common.h>
 
-extern const char *const pptp_msg_name[];
+extern const char *const pptp_msg_name(u_int16_t msg);
 
 /* state of the control session */
 enum pptp_ctrlsess_state {
net/ipv4/netfilter/nf_nat_pptp.c +2 -5
@@ -166,8 +166,7 @@ pptp_outbound_pkt(struct sk_buff *skb,
 		break;
 	default:
 		pr_debug("unknown outbound packet 0x%04x:%s\n", msg,
-			 msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] :
-					       pptp_msg_name[0]);
+			 pptp_msg_name(msg));
 		/* fall through */
 	case PPTP_SET_LINK_INFO:
 		/* only need to NAT in case PAC is behind NAT box */
@@ -268,9 +267,7 @@ pptp_inbound_pkt(struct sk_buff *skb,
 		pcid_off = offsetof(union pptp_ctrl_union, setlink.peersCallID);
 		break;
 	default:
-		pr_debug("unknown inbound packet %s\n",
-			 msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] :
-					       pptp_msg_name[0]);
+		pr_debug("unknown inbound packet %s\n", pptp_msg_name(msg));
 		/* fall through */
 	case PPTP_START_SESSION_REQUEST:
 	case PPTP_START_SESSION_REPLY:
net/netfilter/nf_conntrack_pptp.c +35 -27

129 lines not on this page · raw message

author maintainer
#135 lore raw

PATCH 126/142 esp6: get the right proto for transport mode in esp6_gso_encap

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit 3c96ec56828922e3fe5477f75eb3fc02f98f98b5 upstream.

For transport mode, when ipv6 nexthdr is set, the packet format might be like:

----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------

What it wants to get for x-proto in esp6_gso_encap() is the proto that will be set in ESP nexthdr. So it should skip all ipv6 nexthdrs and get the real transport protocol. Othersize, the wrong proto number will be set into ESP nexthdr.

This patch is to skip all ipv6 nexthdrs by calling ipv6_skip_exthdr() in esp6_gso_encap().

Fixes 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
---
 net/ipv6/esp6_offload.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
net/ipv6/esp6_offload.c +8 -1
@@ -121,9 +121,16 @@ static void esp6_gso_encap(struct xfrm_s
 	struct ip_esp_hdr *esph;
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct xfrm_offload *xo = xfrm_offload(skb);
-	int proto = iph->nexthdr;
+	u8 proto = iph->nexthdr;
 
 	skb_push(skb, -skb_network_offset(skb));
+
+	if (x->outer_mode.encap == XFRM_MODE_TRANSPORT) {
+		__be16 frag;
+
+		ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &proto, &frag);
+	}
+
 	esph = ip_esp_hdr(skb);
 	*skb_mac_header(skb) = IPPROTO_ESP;
 
author maintainer
#136 lore raw

PATCH 127/142 bnxt_en: Fix accumulation of bp->net_stats_prev.

In reply to Greg Kroah-Hartman

From: Michael Chan <[email protected]>

commit b8056e8434b037fdab08158fea99ed7bc8ef3a74 upstream.

We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G.

Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset.

Fixes b8875ca356f1 ("bnxt_en: Save ring statistics before reset.")
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -1
@@ -9285,7 +9285,7 @@ static void __bnxt_close_nic(struct bnxt
 	bnxt_free_skbs(bp);
 
 	/* Save ring stats before shutdown */
-	if (bp->bnapi)
+	if (bp->bnapi && irq_re_init)
 		bnxt_get_ring_stats(bp, &bp->net_stats_prev);
 	if (irq_re_init) {
 		bnxt_free_irq(bp);
author maintainer
#137 lore raw

PATCH 128/142 ieee80211: Fix incorrect mask for default PE duration

In reply to Greg Kroah-Hartman

From: Pradeep Kumar Chitrapu <[email protected]>

commit d031781bdabe1027858a3220f868866586bf6e7c upstream.

Fixes bitmask for HE opration's default PE duration.

Fixes daa5b83513a7 ("mac80211: update HE operation fields to D3.0")
---
 include/linux/ieee80211.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/ieee80211.h +1 -1
@@ -2047,7 +2047,7 @@ ieee80211_he_ppe_size(u8 ppe_thres_hdr,
 }
 
 /* HE Operation defines */
-#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK		0x00000003
+#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK		0x00000007
 #define IEEE80211_HE_OPERATION_TWT_REQUIRED			0x00000008
 #define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK		0x00003ff0
 #define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET		4
author maintainer
#138 lore raw

PATCH 129/142 xsk: Add overflow check for u64 division, stored into u32

In reply to Greg Kroah-Hartman

From: Björn Töpel <[email protected]>

commit b16a87d0aef7a6be766f6618976dc5ff2c689291 upstream.

The npgs member of struct xdp_umem is an u32 entity, and stores the number of pages the UMEM consumes. The calculation of npgs

npgs = size / PAGE_SIZE

can overflow.

To avoid overflow scenarios, the division is now first stored in a u64, and the result is verified to fit into 32b.

An alternative would be storing the npgs as a u64, however, this wastes memory and is an unrealisticly large packet area.

---
 net/xdp/xdp_umem.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/xdp/xdp_umem.c +6 -2
@@ -341,8 +341,8 @@ static int xdp_umem_reg(struct xdp_umem
 {
 	bool unaligned_chunks = mr->flags & XDP_UMEM_UNALIGNED_CHUNK_FLAG;
 	u32 chunk_size = mr->chunk_size, headroom = mr->headroom;
+	u64 npgs, addr = mr->addr, size = mr->len;
 	unsigned int chunks, chunks_per_page;
-	u64 addr = mr->addr, size = mr->len;
 	int err;
 
 	if (chunk_size < XDP_UMEM_MIN_CHUNK_SIZE || chunk_size > PAGE_SIZE) {
@@ -372,6 +372,10 @@ static int xdp_umem_reg(struct xdp_umem
 	if ((addr + size) < addr)
 		return -EINVAL;
 
+	npgs = div_u64(size, PAGE_SIZE);
+	if (npgs > U32_MAX)
+		return -EINVAL;
+
 	chunks = (unsigned int)div_u64(size, chunk_size);
 	if (chunks == 0)
 		return -EINVAL;
@@ -391,7 +395,7 @@ static int xdp_umem_reg(struct xdp_umem
 	umem->size = size;
 	umem->headroom = headroom;
 	umem->chunk_size_nohr = chunk_size - headroom;
-	umem->npgs = size / PAGE_SIZE;
+	umem->npgs = (u32)npgs;
 	umem->pgs = NULL;
 	umem->user = NULL;
 	umem->flags = mr->flags;
author maintainer
#139 lore raw

PATCH 130/142 qlcnic: fix missing release in qlcnic_83xx_interrupt_test.

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

commit 15c973858903009e995b2037683de29dfe968621 upstream.

In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed.

Fixes b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure")
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +3 -1
@@ -3651,7 +3651,7 @@ int qlcnic_83xx_interrupt_test(struct ne
 	ahw->diag_cnt = 0;
 	ret = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST);
 	if (ret)
-		goto fail_diag_irq;
+		goto fail_mbx_args;
 
 	if (adapter->flags & QLCNIC_MSIX_ENABLED)
 		intrpt_id = ahw->intr_tbl[0].id;
@@ -3681,6 +3681,8 @@ int qlcnic_83xx_interrupt_test(struct ne
 
 done:
 	qlcnic_free_mbx_args(&cmd);
+
+fail_mbx_args:
 	qlcnic_83xx_diag_free_res(netdev, drv_sds_rings);
 
 fail_diag_irq:
author maintainer
#140 lore raw

PATCH 131/142 crypto: chelsio/chtls: properly set tp->lsndtime

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

commit a4976a3ef844c510ae9120290b23e9f3f47d6bce upstream.

TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp()

Fixes 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx")
Cc Ayush Sawal <[email protected]>
Cc Vinay Kumar Yadav <[email protected]>
---
 drivers/crypto/chelsio/chtls/chtls_io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/crypto/chelsio/chtls/chtls_io.c +1 -1
@@ -682,7 +682,7 @@ int chtls_push_frames(struct chtls_sock
 				make_tx_data_wr(sk, skb, immdlen, len,
 						credits_needed, completion);
 			tp->snd_nxt += len;
-			tp->lsndtime = tcp_time_stamp(tp);
+			tp->lsndtime = tcp_jiffies32;
 			if (completion)
 				ULP_SKB_CB(skb)->flags &= ~ULPCB_FLAG_NEED_HDR;
 		} else {
author maintainer
#141 lore raw

PATCH 132/142 nexthops: Move code from remove_nexthop_from_groups to remove_nh_grp_entry

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

commit ac21753a5c2c9a6a2019997481a2ac12bbde48c8 upstream.

Move nh_grp dereference and check for removing nexthop group due to all members gone into remove_nh_grp_entry.

Fixes 430a049190de ("nexthop: Add support for nexthop groups")
---
 net/ipv4/nexthop.c |   27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)
net/ipv4/nexthop.c +13 -14
@@ -695,17 +695,21 @@ static void nh_group_rebalance(struct nh
 	}
 }
 
-static void remove_nh_grp_entry(struct nh_grp_entry *nhge,
-				struct nh_group *nhg,
+static void remove_nh_grp_entry(struct net *net, struct nh_grp_entry *nhge,
 				struct nl_info *nlinfo)
 {
+	struct nexthop *nhp = nhge->nh_parent;
 	struct nexthop *nh = nhge->nh;
 	struct nh_grp_entry *nhges;
+	struct nh_group *nhg;
 	bool found = false;
 	int i;
 
 	WARN_ON(!nh);
 
+	list_del(&nhge->nh_list);
+
+	nhg = rtnl_dereference(nhp->nh_grp);
 	nhges = nhg->nh_entries;
 	for (i = 0; i < nhg->num_nh; ++i) {
 		if (found) {
@@ -729,7 +733,11 @@ static void remove_nh_grp_entry(struct n
 	nexthop_put(nh);
 
 	if (nlinfo)
-		nexthop_notify(RTM_NEWNEXTHOP, nhge->nh_parent, nlinfo);
+		nexthop_notify(RTM_NEWNEXTHOP, nhp, nlinfo);
+
+	/* if this group has no more entries then remove it */
+	if (!nhg->num_nh)
+		remove_nexthop(net, nhp, nlinfo);
 }
 
 static void remove_nexthop_from_groups(struct net *net, struct nexthop *nh,
@@ -737,17 +745,8 @@ static void remove_nexthop_from_groups(s
 {
 	struct nh_grp_entry *nhge, *tmp;
 
-	list_for_each_entry_safe(nhge, tmp, &nh->grp_list, nh_list) {
-		struct nh_group *nhg;
-
-		list_del(&nhge->nh_list);
-		nhg = rtnl_dereference(nhge->nh_parent->nh_grp);
-		remove_nh_grp_entry(nhge, nhg, nlinfo);
-
-		/* if this group has no more entries then remove it */
-		if (!nhg->num_nh)
-			remove_nexthop(net, nhge->nh_parent, nlinfo);
-	}
+	list_for_each_entry_safe(nhge, tmp, &nh->grp_list, nh_list)
+		remove_nh_grp_entry(net, nhge, nlinfo);
 }
 
 static void remove_nexthop_group(struct nexthop *nh, struct nl_info *nlinfo)
author maintainer
#142 lore raw

PATCH 133/142 nexthops: dont modify published nexthop groups

In reply to Greg Kroah-Hartman

From: Nikolay Aleksandrov <[email protected]>

commit 90f33bffa382598a32cc82abfeb20adc92d041b6 upstream.

We must avoid modifying published nexthop groups while they might be in use, otherwise we might see NULL ptr dereferences. In order to do that we allocate 2 nexthoup group structures upon nexthop creation and swap between them when we have to delete an entry. The reason is that we can't fail nexthop group removal, so we can't handle allocation failure thus we move the extra allocation on creation where we can safely fail and return ENOMEM.

Fixes 430a049190de ("nexthop: Add support for nexthop groups")
---
 include/net/nexthop.h |    1 
 net/ipv4/nexthop.c    |   91 +++++++++++++++++++++++++++++++-------------------
 2 files changed, 59 insertions(+), 33 deletions(-)
include/net/nexthop.h +1 -0
@@ -70,6 +70,7 @@ struct nh_grp_entry {
 };
 
 struct nh_group {
+	struct nh_group		*spare; /* spare group for removals */
 	u16			num_nh;
 	bool			mpath;
 	bool			has_v4;
net/ipv4/nexthop.c +58 -33

153 lines not on this page · raw message

author maintainer
#143 lore raw

PATCH 134/142 nexthop: Expand nexthop_is_multipath in a few places

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

commit 0b5e2e39739e861fa5fc84ab27a35dbe62a15330 upstream.

I got too fancy consolidating checks on multipath type. The result is that path lookups can access 2 different nh_grp structs as exposed by Nik's torture tests. Expand nexthop_is_multipath within nexthop.h to avoid multiple, nh_grp dereferences and make decisions based on the consistent struct.

Only 2 places left using nexthop_is_multipath are within IPv6, both only check that the nexthop is a multipath for a branching decision which are acceptable.

Fixes 430a049190de ("nexthop: Add support for nexthop groups")
---
 include/net/nexthop.h |   41 +++++++++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 16 deletions(-)
include/net/nexthop.h +25 -16
@@ -137,21 +137,20 @@ static inline unsigned int nexthop_num_p
 {
 	unsigned int rc = 1;
 
-	if (nexthop_is_multipath(nh)) {
+	if (nh->is_group) {
 		struct nh_group *nh_grp;
 
 		nh_grp = rcu_dereference_rtnl(nh->nh_grp);
-		rc = nh_grp->num_nh;
+		if (nh_grp->mpath)
+			rc = nh_grp->num_nh;
 	}
 
 	return rc;
 }
 
 static inline
-struct nexthop *nexthop_mpath_select(const struct nexthop *nh, int nhsel)
+struct nexthop *nexthop_mpath_select(const struct nh_group *nhg, int nhsel)
 {
-	const struct nh_group *nhg = rcu_dereference_rtnl(nh->nh_grp);
-
 	/* for_nexthops macros in fib_semantics.c grabs a pointer to
 	 * the nexthop before checking nhsel
 	 */
@@ -186,12 +185,14 @@ static inline bool nexthop_is_blackhole(
 {
 	const struct nh_info *nhi;
 
-	if (nexthop_is_multipath(nh)) {
-		if (nexthop_num_path(nh) > 1)
-			return false;
-		nh = nexthop_mpath_select(nh, 0);
-		if (!nh)
+	if (nh->is_group) {
+		struct nh_group *nh_grp;
+
+		nh_grp = rcu_dereference_rtnl(nh->nh_grp);
+		if (nh_grp->num_nh > 1)
 			return false;
+
+		nh = nh_grp->nh_entries[0].nh;
 	}
 
 	nhi = rcu_dereference_rtnl(nh->nh_info);
@@ -217,10 +218,15 @@ struct fib_nh_common *nexthop_fib_nhc(st
 	BUILD_BUG_ON(offsetof(struct fib_nh, nh_common) != 0);
 	BUILD_BUG_ON(offsetof(struct fib6_nh, nh_common) != 0);
 
-	if (nexthop_is_multipath(nh)) {
-		nh = nexthop_mpath_select(nh, nhsel);
-		if (!nh)
-			return NULL;
+	if (nh->is_group) {
+		struct nh_group *nh_grp;
+
+		nh_grp = rcu_dereference_rtnl(nh->nh_grp);
+		if (nh_grp->mpath) {
+			nh = nexthop_mpath_select(nh_grp, nhsel);
+			if (!nh)
+				return NULL;
+		}
 	}
 
 	nhi = rcu_dereference_rtnl(nh->nh_info);
@@ -264,8 +270,11 @@ static inline struct fib6_nh *nexthop_fi
 {
 	struct nh_info *nhi;
 
-	if (nexthop_is_multipath(nh)) {
-		nh = nexthop_mpath_select(nh, 0);
+	if (nh->is_group) {
+		struct nh_group *nh_grp;
+
+		nh_grp = rcu_dereference_rtnl(nh->nh_grp);
+		nh = nexthop_mpath_select(nh_grp, 0);
 		if (!nh)
 			return NULL;
 	}
author maintainer
#144 lore raw

PATCH 135/142 ipv4: nexthop version of fib_info_nh_uses_dev

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

commit 1fd1c768f3624a5e66766e7b4ddb9b607cd834a5 upstream.

Similar to the last path, need to fix fib_info_nh_uses_dev for external nexthops to avoid referencing multiple nh_grp structs. Move the device check in fib_info_nh_uses_dev to a helper and create a nexthop version that is called if the fib_info uses an external nexthop.

Fixes 430a049190de ("nexthop: Add support for nexthop groups")
---
 include/net/ip_fib.h    |   10 ++++++++++
 include/net/nexthop.h   |   25 +++++++++++++++++++++++++
 net/ipv4/fib_frontend.c |   19 ++++++++++---------
 3 files changed, 45 insertions(+), 9 deletions(-)
include/net/ip_fib.h +10 -0
@@ -422,6 +422,16 @@ static inline int fib_num_tclassid_users
 #endif
 int fib_unmerge(struct net *net);
 
+static inline bool nhc_l3mdev_matches_dev(const struct fib_nh_common *nhc,
+const struct net_device *dev)
+{
+	if (nhc->nhc_dev == dev ||
+	    l3mdev_master_ifindex_rcu(nhc->nhc_dev) == dev->ifindex)
+		return true;
+
+	return false;
+}
+
 /* Exported by fib_semantics.c */
 int ip_fib_check_default(__be32 gw, struct net_device *dev);
 int fib_sync_down_dev(struct net_device *dev, unsigned long event, bool force);
include/net/nexthop.h +25 -0
@@ -233,6 +233,31 @@ struct fib_nh_common *nexthop_fib_nhc(st
 	return &nhi->fib_nhc;
 }
 
+static inline bool nexthop_uses_dev(const struct nexthop *nh,
+				    const struct net_device *dev)
+{
+	struct nh_info *nhi;
+
+	if (nh->is_group) {
+		struct nh_group *nhg = rcu_dereference(nh->nh_grp);
+		int i;
+
+		for (i = 0; i < nhg->num_nh; i++) {
+			struct nexthop *nhe = nhg->nh_entries[i].nh;
+
+			nhi = rcu_dereference(nhe->nh_info);
+			if (nhc_l3mdev_matches_dev(&nhi->fib_nhc, dev))
+				return true;
+		}
+	} else {
+		nhi = rcu_dereference(nh->nh_info);
+		if (nhc_l3mdev_matches_dev(&nhi->fib_nhc, dev))
+			return true;
+	}
+
+	return false;
+}
+
 static inline unsigned int fib_info_num_path(const struct fib_info *fi)
 {
 	if (unlikely(fi->nh))
net/ipv4/fib_frontend.c +10 -9
@@ -319,17 +319,18 @@ bool fib_info_nh_uses_dev(struct fib_inf
 {
 	bool dev_match = false;
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
-	int ret;
+	if (unlikely(fi->nh)) {
+		dev_match = nexthop_uses_dev(fi->nh, dev);
+	} else {
+		int ret;
 
-	for (ret = 0; ret < fib_info_num_path(fi); ret++) {
-		const struct fib_nh_common *nhc = fib_info_nhc(fi, ret);
+		for (ret = 0; ret < fib_info_num_path(fi); ret++) {
+			const struct fib_nh_common *nhc = fib_info_nhc(fi, ret);
 
-		if (nhc->nhc_dev == dev) {
-			dev_match = true;
-			break;
-		} else if (l3mdev_master_ifindex_rcu(nhc->nhc_dev) == dev->ifindex) {
-			dev_match = true;
-			break;
+			if (nhc_l3mdev_matches_dev(nhc, dev)) {
+				dev_match = true;
+				break;
+			}
 		}
 	}
 #else
author maintainer
#145 lore raw

PATCH 136/142 net: dsa: declare lockless TX feature for slave ports

In reply to Greg Kroah-Hartman

From: Vladimir Oltean <[email protected]>

commit 2b86cb8299765688c5119fd18d5f436716c81010 upstream.

Be there a platform with the following layout:

      Regular NIC
       |
       +----> DSA master for switch port
               |
               +----> DSA master for another switch port

After changing DSA back to static lockdep class keys in commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), this kernel splat can be seen:

[   13.361198] ============================================
[   13.366524] WARNING: possible recursive locking detected
[   13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted
[   13.377874] --------------------------------------------
[   13.383201] swapper/0/0 is trying to acquire lock:
[   13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[   13.397879]
[   13.397879] but task is already holding lock:
[   13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[   13.413593]
[   13.413593] other info that might help us debug this:
[   13.420140]  Possible unsafe locking scenario:
[   13.420140]
[   13.426075]        CPU0
[   13.428523]        ----
[   13.430969]   lock(&dsa_slave_netdev_xmit_lock_key);
[   13.435946]   lock(&dsa_slave_netdev_xmit_lock_key);
[   13.440924]
[   13.440924]  *** DEADLOCK ***
[   13.440924]
[   13.446860]  May be due to missing lock nesting notation
[   13.446860]
[   13.453668] 6 locks held by swapper/0/0:
[   13.457598]  #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400
[   13.466593]  #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560
[   13.474803]  #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10
[   13.483886]  #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0
[   13.492793]  #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[   13.503094]  #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0
[   13.512000]
[   13.512000] stack backtrace:
[   13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988
[   13.530421] Call trace:
[   13.532871]  dump_backtrace+0x0/0x1d8
[   13.536539]  show_stack+0x24/0x30
[   13.539862]  dump_stack+0xe8/0x150
[   13.543271]  __lock_acquire+0x1030/0x1678
[   13.547290]  lock_acquire+0xf8/0x458
[   13.550873]  _raw_spin_lock+0x44/0x58
[   13.554543]  __dev_queue_xmit+0x84c/0xbe0
[   13.558562]  dev_queue_xmit+0x24/0x30
[   13.562232]  dsa_slave_xmit+0xe0/0x128
[   13.565988]  dev_hard_start_xmit+0xf4/0x448
[   13.570182]  __dev_queue_xmit+0x808/0xbe0
[   13.574200]  dev_queue_xmit+0x24/0x30
[   13.577869]  neigh_resolve_output+0x15c/0x220
[   13.582237]  ip6_finish_output2+0x244/0xb10
[   13.586430]  __ip6_finish_output+0x1dc/0x298
[   13.590709]  ip6_output+0x84/0x358
[   13.594116]  mld_sendpack+0x2bc/0x560
[   13.597786]  mld_ifc_timer_expire+0x210/0x390
[   13.602153]  call_timer_fn+0xcc/0x400
[   13.605822]  run_timer_softirq+0x588/0x6e0
[   13.609927]  __do_softirq+0x118/0x590
[   13.613597]  irq_exit+0x13c/0x148
[   13.616918]  __handle_domain_irq+0x6c/0xc0
[   13.621023]  gic_handle_irq+0x6c/0x160
[   13.624779]  el1_irq+0xbc/0x180
[   13.627927]  cpuidle_enter_state+0xb4/0x4d0
[   13.632120]  cpuidle_enter+0x3c/0x50
[   13.635703]  call_cpuidle+0x44/0x78
[   13.639199]  do_idle+0x228/0x2c8
[   13.642433]  cpu_startup_entry+0x2c/0x48
[   13.646363]  rest_init+0x1ac/0x280
[   13.649773]  arch_call_rest_init+0x14/0x1c
[   13.653878]  start_kernel+0x490/0x4bc

Lockdep keys themselves were added in commit ab92d68fc22f ("net: core:
add generic lockdep keys"), and it's very likely that this splat existed since then, but I have no real way to check, since this stacked platform wasn't supported by mainline back then.

Quoted 1 line

From Taehee's own words:

This patch was considered that all stackable devices have LLTX flag. But the dsa doesn't have LLTX, so this splat happened. After this patch, dsa shares the same lockdep class key. On the nested dsa interface architecture, which you illustrated, the same lockdep class key will be used in __dev_queue_xmit() because dsa doesn't have LLTX.
So that lockdep detects deadlock because the same lockdep class key is used recursively although actually the different locks are used. There are some ways to fix this problem.

1. using NETIF_F_LLTX flag.
If possible, using the LLTX flag is a very clear way for it. But I'm so sorry I don't know whether the dsa could have LLTX or not.

2. using dynamic lockdep again.
It means that each interface uses a separate lockdep class key. So, lockdep will not detect recursive locking.
But this way has a problem that it could consume lockdep class key too many.
Currently, lockdep can have 8192 lockdep class keys.
- you can see this number with the following command.
cat /proc/lockdep_stats
lock-classes: 1251 [max: 8192]
...
The [max: 8192] means that the maximum number of lockdep class keys.
If too many lockdep class keys are registered, lockdep stops to work. So, using a dynamic(separated) lockdep class key should be considered carefully.
In addition, updating lockdep class key routine might have to be existing. (lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key())

3. Using lockdep subclass.
A lockdep class key could have 8 subclasses.
The different subclass is considered different locks by lockdep infrastructure.
But "lock-classes" is not counted by subclasses.
So, it could avoid stopping lockdep infrastructure by an overflow of lockdep class keys.
This approach should also have an updating lockdep class key routine. (lockdep_set_subclass())

4. Using nonvalidate lockdep class key.
The lockdep infrastructure supports nonvalidate lockdep class key type. It means this lockdep is not validated by lockdep infrastructure. So, the splat will not happen but lockdep couldn't detect real deadlock case because lockdep really doesn't validate it.
I think this should be used for really special cases. (lockdep_set_novalidate_class())

Further discussion here:
https://patchwork.ozlabs.org/project/netdev/patch/[email protected]/

There appears to be no negative side-effect to declaring lockless TX for the DSA virtual interfaces, which means they handle their own locking. So that's what we do to make the splat go away.

Patch tested in a wide variety of cases: unicast, multicast, PTP, etc.

Fixes ab92d68fc22f ("net: core: add generic lockdep keys")
---
 net/dsa/slave.c |    1 +
 1 file changed, 1 insertion(+)
net/dsa/slave.c +1 -0
@@ -1409,6 +1409,7 @@ int dsa_slave_create(struct dsa_port *po
 	if (ds->ops->port_vlan_add && ds->ops->port_vlan_del)
 		slave_dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 	slave_dev->hw_features |= NETIF_F_HW_TC;
+	slave_dev->features |= NETIF_F_LLTX;
 	slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
 	if (!IS_ERR_OR_NULL(port->mac))
 		ether_addr_copy(slave_dev->dev_addr, port->mac);
author maintainer
#146 lore raw

PATCH 137/142 bonding: Fix reference count leak in bond_sysfs_slave_add.

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

commit a068aab42258e25094bc2c159948d263ed7d7a77 upstream.

kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem.

Fixes 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
---
 drivers/net/bonding/bond_sysfs_slave.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_sysfs_slave.c +3 -1
@@ -149,8 +149,10 @@ int bond_sysfs_slave_add(struct slave *s
 
 	err = kobject_init_and_add(&slave->kobj, &slave_ktype,
 				   &(slave->dev->dev.kobj), "bonding_slave");
-	if (err)
+	if (err) {
+		kobject_put(&slave->kobj);
 		return err;
+	}
 
 	for (a = slave_attrs; *a; ++a) {
 		err = sysfs_create_file(&slave->kobj, &((*a)->attr));
author maintainer
#147 lore raw

PATCH 138/142 Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"

In reply to Greg Kroah-Hartman

From: Dmitry Torokhov <[email protected]>

commit f4dec2d6160976b14e54be9c3950ce0f52385741 upstream.

This reverts commit 18931506465a762ffd3f4803d36a18d336a67da9. From Kevin Locke:

"... nomux only appeared to fix the issue because the controller continued working after warm reboots. After more thorough testing from both warm and cold start, I now believe the entry should be added to i8042_dmi_reset_table rather than i8042_dmi_nomux_table as i8042.reset=1 alone is sufficient to avoid the issue from both states while i8042.nomux is not."

---
 drivers/input/serio/i8042-x86ia64io.h |    7 -------
 1 file changed, 7 deletions(-)
drivers/input/serio/i8042-x86ia64io.h +0 -7
@@ -541,13 +541,6 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
 		},
 	},
-	{
-		/* Lenovo ThinkPad Twist S230u */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
-		},
-	},
 	{ }
 };
 
author maintainer
#148 lore raw

PATCH 139/142 netfilter: conntrack: comparison of unsigned in cthelper confirmation

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

commit 94945ad2b330207cded0fd8d4abebde43a776dfb upstream.

net/netfilter/nf_conntrack_core.c: In function nf_confirm_cthelper:
net/netfilter/nf_conntrack_core.c:2117:15: warning: comparison of unsigned expression in < 0 is always false [-Wtype-limits]
2117 | if (protoff < 0 || (frag_off & htons(~0x7)) != 0)
| ^

ipv6_skip_exthdr() returns a signed integer.

Fixes 703acd70f249 ("netfilter: nfnetlink_cthelper: unbreak userspace helper support")
---
 net/netfilter/nf_conntrack_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/nf_conntrack_core.c +1 -1
@@ -1955,7 +1955,7 @@ static int nf_confirm_cthelper(struct sk
 {
 	const struct nf_conntrack_helper *helper;
 	const struct nf_conn_help *help;
-	unsigned int protoff;
+	int protoff;
 
 	help = nfct_help(ct);
 	if (!help)
author maintainer
#149 lore raw

PATCH 140/142 netfilter: conntrack: Pass value of ctinfo to __nf_conntrack_update

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

commit 46c1e0621a72e0469ec4edfdb6ed4d387ec34f8a upstream.

Clang warns:

net/netfilter/nf_conntrack_core.c:2068:21: warning: variable 'ctinfo' is uninitialized when used here [-Wuninitialized]

        nf_ct_set(skb, ct, ctinfo);
                           ^~~~~~
net/netfilter/nf_conntrack_core.c:2024:2: note: variable 'ctinfo' is
declared here
        enum ip_conntrack_info ctinfo;
        ^

1 warning generated.

nf_conntrack_update was split up into nf_conntrack_update and __nf_conntrack_update, where the assignment of ctinfo is in nf_conntrack_update but it is used in __nf_conntrack_update.

Pass the value of ctinfo from nf_conntrack_update to __nf_conntrack_update so that uninitialized memory is not used and everything works properly.

Fixes ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again")
---
 net/netfilter/nf_conntrack_core.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/netfilter/nf_conntrack_core.c +3 -3
@@ -1880,11 +1880,11 @@ static void nf_conntrack_attach(struct s
 }
 
 static int __nf_conntrack_update(struct net *net, struct sk_buff *skb,
-				 struct nf_conn *ct)
+				 struct nf_conn *ct,
+				 enum ip_conntrack_info ctinfo)
 {
 	struct nf_conntrack_tuple_hash *h;
 	struct nf_conntrack_tuple tuple;
-	enum ip_conntrack_info ctinfo;
 	struct nf_nat_hook *nat_hook;
 	unsigned int status;
 	int dataoff;
@@ -2009,7 +2009,7 @@ static int nf_conntrack_update(struct ne
 		return 0;
 
 	if (!nf_ct_is_confirmed(ct)) {
-		err = __nf_conntrack_update(net, skb, ct);
+		err = __nf_conntrack_update(net, skb, ct, ctinfo);
 		if (err < 0)
 			return err;
 	}
author maintainer
#150 lore raw

PATCH 141/142 netfilter: nf_conntrack_pptp: fix compilation warning with W=1 build

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

commit 4946ea5c1237036155c3b3a24f049fd5f849f8f6 upstream.

Quoted 1 line
Quoted 1 line

include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]

extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~

Fixes 4c559f15efcc ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code")
---
 include/linux/netfilter/nf_conntrack_pptp.h |    2 +-
 net/netfilter/nf_conntrack_pptp.c           |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
include/linux/netfilter/nf_conntrack_pptp.h +1 -1
@@ -10,7 +10,7 @@
 #include <net/netfilter/nf_conntrack_expect.h>
 #include <uapi/linux/netfilter/nf_conntrack_tuple_common.h>
 
-extern const char *const pptp_msg_name(u_int16_t msg);
+const char *pptp_msg_name(u_int16_t msg);
 
 /* state of the control session */
 enum pptp_ctrlsess_state {
net/netfilter/nf_conntrack_pptp.c +1 -1
@@ -91,7 +91,7 @@ static const char *const pptp_msg_name_a
 	[PPTP_SET_LINK_INFO]		= "SET_LINK_INFO"
 };
 
-const char *const pptp_msg_name(u_int16_t msg)
+const char *pptp_msg_name(u_int16_t msg)
 {
 	if (msg > PPTP_MSG_MAX)
 		return pptp_msg_name_array[0];
author maintainer
#151 lore raw

PATCH 142/142 perf: Make perf able to build with latest libbfd

In reply to Greg Kroah-Hartman

From: Changbin Du <[email protected]>

commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 upstream.

libbfd has changed the bfd_section_* macros to inline functions bfd_section_<field> since 2019-09-18. See below two commits:
o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html
o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html

This fix make perf able to build with both old and new libbfd.

---
 tools/perf/util/srcline.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
tools/perf/util/srcline.c +15 -1
@@ -193,16 +193,30 @@ static void find_address_in_section(bfd
 	bfd_vma pc, vma;
 	bfd_size_type size;
 	struct a2l_data *a2l = data;
+	flagword flags;
 
 	if (a2l->found)
 		return;
 
-	if ((bfd_get_section_flags(abfd, section) & SEC_ALLOC) == 0)
+#ifdef bfd_get_section_flags
+	flags = bfd_get_section_flags(abfd, section);
+#else
+	flags = bfd_section_flags(section);
+#endif
+	if ((flags & SEC_ALLOC) == 0)
 		return;
 
 	pc = a2l->addr;
+#ifdef bfd_get_section_vma
 	vma = bfd_get_section_vma(abfd, section);
+#else
+	vma = bfd_section_vma(section);
+#endif
+#ifdef bfd_get_section_size
 	size = bfd_get_section_size(section);
+#else
+	size = bfd_section_size(section);
+#endif
 
 	if (pc < vma || pc >= vma + size)
 		return;
#152 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.44 release. There are 142 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 03 Jun 2020 17:38:19 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.44-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.44-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 1fd4226c4fe1a358bb8277e25ebb03950180443a
git describe: v5.4.43-143-g1fd4226c4fe1
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.43-143-g1fd4226c4fe1

No regressions (compared to build v5.4.43)

No fixes (compared to build v5.4.43)

Ran 31360 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kselftest/networking
* libgpiod
* linux-log-parser
* ltp-commands-tests
* ltp-containers-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* perf
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org