mx6ul_14x14_evk: Enable SPL USB and SDP support
PATCH 1/2 mx6ul_14x14_evk: Enable SPL USB and SDP support
This fixes the boot from USB loader, which is critical to easy the manufacture process.
---
(no changes since v1)
configs/mx6ul_14x14_evk_defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)
configs/mx6ul_14x14_evk_defconfig +11 -0
@@ -22,6 +22,9 @@ CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
@@ -32,6 +35,8 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y
@@ -46,6 +51,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6ul-14x14-evk" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_DM_74X164=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y
@@ -73,5 +79,10 @@ CONFIG_SOFT_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y CONFIG_SYS_WHITE_ON_BLACK=y
Signature · 1 line
2.27.0
PATCH 2/2 mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper
We need to change the environment offset to avoid corrupting the U-Boot binary when saving it.
---
Changes in v2:
- rework commit log
configs/mx6ul_14x14_evk_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/mx6ul_14x14_evk_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x80000 +CONFIG_ENV_OFFSET=0xC0000 CONFIG_TARGET_MX6UL_14X14_EVK=y CONFIG_DM_GPIO=y CONFIG_SPL_MMC_SUPPORT=y
Signature · 1 line
2.27.0
PATCH 2/2 mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper
Quoted 5 lines · Otavio Salvador
We need to change the environment offset to avoid corrupting the U-Boot binary when saving it.
Signed-off-by Otavio Salvador <[email protected]>
PATCH 2/2 mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper
In reply to Otavio SalvadorQuoted 4 lines
We need to change the environment offset to avoid corrupting the U-Boot binary when saving it.
Signed-off-by Otavio Salvador <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/2 mx6ul_14x14_evk: Enable SPL USB and SDP support
In reply to Otavio SalvadorQuoted 5 lines · Otavio Salvador
This fixes the boot from USB loader, which is critical to easy the manufacture process.
Signed-off-by Otavio Salvador <[email protected]>
PATCH 1/2 mx6ul_14x14_evk: Enable SPL USB and SDP support
In reply to Otavio SalvadorQuoted 4 lines
This fixes the boot from USB loader, which is critical to easy the manufacture process.
Signed-off-by Otavio Salvador <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================