Skip to contentSkip to conversation

mx6ul_14x14_evk: Enable SPL USB and SDP support

PATCH New Otavio Salvador 3 participants 6 messages Jun 9, 2020 – Jun 23, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 mx6ul_14x14_evk: Enable SPL USB and SDP support

This fixes the boot from USB loader, which is critical to easy the manufacture process.

---

(no changes since v1)

 configs/mx6ul_14x14_evk_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)
configs/mx6ul_14x14_evk_defconfig +11 -0
index 2906782b126..cad766443c2 100644
@@ -22,6 +22,9 @@ CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -32,6 +35,8 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
@@ -46,6 +51,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6ul-14x14-evk"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_DM_74X164=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
@@ -73,5 +79,10 @@ CONFIG_SOFT_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
 CONFIG_DM_VIDEO=y
 CONFIG_SYS_WHITE_ON_BLACK=y
Signature · 1 line
2.27.0
#1 lore raw

PATCH 2/2 mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper

We need to change the environment offset to avoid corrupting the U-Boot binary when saving it.

---

Changes in v2:
- rework commit log

 configs/mx6ul_14x14_evk_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/mx6ul_14x14_evk_defconfig +1 -1
index cad766443c2..4ec5f80ee69 100644
@@ -5,7 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x80000
+CONFIG_ENV_OFFSET=0xC0000
 CONFIG_TARGET_MX6UL_14X14_EVK=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL_MMC_SUPPORT=y
Signature · 1 line
2.27.0
#3 lore raw

PATCH 2/2 mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper

In reply to Otavio Salvador
Quoted 4 lines

We need to change the environment offset to avoid corrupting the U-Boot binary when saving it.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#5 lore raw

PATCH 1/2 mx6ul_14x14_evk: Enable SPL USB and SDP support

In reply to Otavio Salvador
Quoted 4 lines

This fixes the boot from USB loader, which is critical to easy the manufacture process.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================