imx: support for conga-QMX8 board
Subsystems (3)
v3 cover imx: support for conga-QMX8 board
Second patch is still needed for booting. Tipps to get rid of that patch would be helpfull.
Between u-boot-imx-20200511 and u-boot-imx-20200609 something more is broken, I run into this issue:
U-Boot 2020.07-rc3-00002-gbf3f929aa6 (Jun 16 2020 - 14:36:58 +0200)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB
Device 'gpio at 5d090000': seq 0 is in use by 'gpio at 5d080000' Device 'gpio at 5d0a0000': seq 1 is in use by 'gpio at 5d090000'
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000
"Synchronous Abort" handler, esr 0x96000004
elr: 000000008005cf48 lr : 0000000080022f94 (reloc)
elr: 00000000fff22f48 lr : 00000000ffee8f94 x0 : fffffffffdaf3540 x1 : 00000000fff2d8a0 x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 : fffffffffdaf3540 x6 : 00000000fff068a8 x7 : 00000000fff3bca0 x8 : 00000000fdaf3ac0 x9 : 0000000000000008
x10: 00000000fdaecb30 x11: 00000000fdaefdd0
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fdadebf8 x15: 00000000ffffffff
x16: 0000000000001080 x17: 0000000000000000
x18: 00000000fdae4da0 x19: 0000000000000002
x20: 00000000fff3b000 x21: 000000007fec6000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000fdadfd90
Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)
Resetting CPU ...
resetting ...
Oliver Graute (2):
imx: support for conga-QMX8 board
hack to boot with 2020.01
arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8qm-cgtqmx8.dts | 427 +++++++++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig | 7 + board/congatec/cgtqmx8/Kconfig | 14 + board/congatec/cgtqmx8/MAINTAINERS | 6 + board/congatec/cgtqmx8/Makefile | 11 + board/congatec/cgtqmx8/README | 46 +++ board/congatec/cgtqmx8/cgtqmx8.c | 479 ++++++++++++++++++++++++++++ board/congatec/cgtqmx8/imximage.cfg | 21 ++ board/congatec/cgtqmx8/spl.c | 76 +++++ board/congatec/common/Kconfig | 48 +++ board/congatec/common/Makefile | 23 ++ board/congatec/common/mmc.c | 50 +++ configs/cgtqmx8_defconfig | 82 +++++ drivers/core/device.c | 7 +- include/configs/cgtqmx8.h | 194 +++++++++++ 16 files changed, 1487 insertions(+), 5 deletions(-) create mode 100644 arch/arm/dts/imx8qm-cgtqmx8.dts create mode 100644 board/congatec/cgtqmx8/Kconfig create mode 100644 board/congatec/cgtqmx8/MAINTAINERS create mode 100644 board/congatec/cgtqmx8/Makefile create mode 100644 board/congatec/cgtqmx8/README create mode 100644 board/congatec/cgtqmx8/cgtqmx8.c create mode 100644 board/congatec/cgtqmx8/imximage.cfg create mode 100644 board/congatec/cgtqmx8/spl.c create mode 100644 board/congatec/common/Kconfig create mode 100644 board/congatec/common/Makefile create mode 100644 board/congatec/common/mmc.c create mode 100644 configs/cgtqmx8_defconfig create mode 100644 include/configs/cgtqmx8.h
Signature · 1 line
2.17.1
PATCH v3 1/1 imx: support for conga-QMX8 board
Add i.MX8QM qmx8 congatec board support
U-Boot 2020.04-00002-g1ff5446a63 (Jun 16 2020 - 13:47:28 +0200)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB
Device 'gpio at 5d090000': seq 0 is in use by 'gpio at 5d080000' Device 'gpio at 5d0a0000': seq 1 is in use by 'gpio at 5d090000'
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000 switch to partitions #0, OK mmc2 is current device Net: eth0: ethernet at 5b040000 Hit any key to stop autoboot: 0
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8qm-cgtqmx8.dts | 427 +++++++++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig | 7 + board/congatec/cgtqmx8/Kconfig | 14 + board/congatec/cgtqmx8/MAINTAINERS | 6 + board/congatec/cgtqmx8/Makefile | 11 + board/congatec/cgtqmx8/README | 57 ++++ board/congatec/cgtqmx8/cgtqmx8.c | 478 ++++++++++++++++++++++++++++ board/congatec/cgtqmx8/imximage.cfg | 21 ++ board/congatec/cgtqmx8/spl.c | 76 +++++ board/congatec/common/Kconfig | 48 +++ board/congatec/common/Makefile | 23 ++ board/congatec/common/mmc.c | 50 +++ configs/cgtqmx8_defconfig | 82 +++++ include/configs/cgtqmx8.h | 194 +++++++++++ 15 files changed, 1454 insertions(+) create mode 100644 arch/arm/dts/imx8qm-cgtqmx8.dts create mode 100644 board/congatec/cgtqmx8/Kconfig create mode 100644 board/congatec/cgtqmx8/MAINTAINERS create mode 100644 board/congatec/cgtqmx8/Makefile create mode 100644 board/congatec/cgtqmx8/README create mode 100644 board/congatec/cgtqmx8/cgtqmx8.c create mode 100644 board/congatec/cgtqmx8/imximage.cfg create mode 100644 board/congatec/cgtqmx8/spl.c create mode 100644 board/congatec/common/Kconfig create mode 100644 board/congatec/common/Makefile create mode 100644 board/congatec/common/mmc.c create mode 100644 configs/cgtqmx8_defconfig create mode 100644 include/configs/cgtqmx8.h
arch/arm/dts/Makefile +1 -0
@@ -735,6 +735,7 @@ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \ dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qm-apalis.dtb \ fsl-imx8qm-mek.dtb \ + imx8qm-cgtqmx8.dtb \ imx8qm-rom7720-a1.dtb \ fsl-imx8qxp-ai_ml.dtb \ fsl-imx8qxp-colibri.dtb \
arch/arm/dts/imx8qm-cgtqmx8.dts new file +427 -0
427 lines not on this page · raw message
arch/arm/mach-imx/imx8/Kconfig +7 -0
@@ -80,6 +80,12 @@ config TARGET_IMX8QM_MEK select BOARD_LATE_INIT select IMX8QM +config TARGET_CONGA_QMX8 + bool "Support congatec conga-QMX8 board" + select BOARD_LATE_INIT + select SUPPORT_SPL + select IMX8QM + config TARGET_IMX8QM_ROM7720_A1 bool "Support i.MX8QM ROM-7720-A1" select BOARD_LATE_INIT
@@ -95,6 +101,7 @@ endchoice source "board/freescale/imx8qm_mek/Kconfig" source "board/freescale/imx8qxp_mek/Kconfig" +source "board/congatec/cgtqmx8/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig"
board/congatec/cgtqmx8/Kconfig new file +14 -0
@@ -0,0 +1,14 @@ +if TARGET_CONGA_QMX8 + +config SYS_BOARD + default "cgtqmx8" + +config SYS_VENDOR + default "congatec" + +config SYS_CONFIG_NAME + default "cgtqmx8" + +source "board/congatec/common/Kconfig" + +endif
board/congatec/cgtqmx8/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +i.MX8QM CGTQMX8 BOARD +M: Oliver Graute <[email protected]> +S: Maintained +F: board/congatec/cgtqmx8/ +F: include/configs/cgtqmx8.h +F: configs/cgtqmx8_defconfig
board/congatec/cgtqmx8/Makefile new file +11 -0
@@ -0,0 +1,11 @@ +# +# Copyright 2017 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cgtqmx8.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +endif
board/congatec/cgtqmx8/README new file +46 -0
46 lines not on this page · raw message
+$ export BL33_LOAD_ADDR=0x80020000
+$ make cgtqmx8_defconfig
+$ make u-boot.bin
+$ make flash.bin
+
+Flash the binary into the SD card
+=================================
+
+Burn the flash.bin binary to SD card offset 32KB:
+
+$ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync
board/congatec/cgtqmx8/cgtqmx8.c new file +479 -0
479 lines not on this page · raw message
board/congatec/cgtqmx8/imximage.cfg new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +BOOT_FROM SD 0x400 +/* SoC type IMX8QM */ +SOC_TYPE IMX8QM +/* Append seco container image */ +APPEND mx8qm-ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU mx8qm-val-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 bl31.bin 0x80000000 +/* Add U-Boot image with load attribute */ +DATA A35 u-boot-dtb.bin 0x80020000
board/congatec/cgtqmx8/spl.c new file +76 -0
76 lines not on this page · raw message
board/congatec/common/Kconfig new file +48 -0
48 lines not on this page · raw message
board/congatec/common/Makefile new file +23 -0
@@ -0,0 +1,23 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +MINIMAL= + +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_INIT_MINIMAL +MINIMAL=y +endif +endif + +ifdef MINIMAL +# necessary to create built-in.o +obj- := __dummy__.o +else + +obj-y += mmc.o + +endif
board/congatec/common/mmc.c new file +50 -0
50 lines not on this page · raw message
configs/cgtqmx8_defconfig new file +82 -0
82 lines not on this page · raw message
include/configs/cgtqmx8.h new file +194 -0
194 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v3 1/1 imx: support for conga-QMX8 board
Hallo Oliver,
Quoted 15 lines · Oliver Graute
Add i.MX8QM qmx8 congatec board support
U-Boot 2020.04-00002-g1ff5446a63 (Jun 16 2020 - 13:47:28 +0200)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiBDevice 'gpio at
5d090000': seq 0 is in use by 'gpio at5d080000' Device 'gpio at5d0a0000': seq 1 is in use by 'gpio at5d090000'
MMC:FSL_SDHC: 0,FSL_SDHC: 1,FSL_SDHC: 2
Loading Environment from MMC... OK
Quoted 8 lines
In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000 switch to partitions #0, OK mmc2 is current device Net: eth0: ethernet at 5b040000 Hit any key to stop autoboot: 0
I see some small issues after merging this. There are some warnings that should be fixed before merging, mainly they are missing prototypes that can be easy fixed. This is the log by building the board:
+ 174 | if (!power_domain_lookup_name("conn_sdhc0", &pd))
+ | ^~~~~~~~~~~~~~~~~~~~~~~~
+ | imx8_power_domain_lookup_name
+ 178 | init_clk_usdhc(0);
+ | ^~~~~~~~~~~~~~
+ 208 | ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ | ^~~~~~~~~~~~~~~~~~~~
+ | fecmxc_initialize
+ 278 | struct power_domain pd0;
+ | ^~~
+ 442 | board_late_mmc_env_init();
+ | ^~~~~~~~~~~~~~~~~~~~~~~
+ | board_late_init
+ 287 | if (ret)
+ | ^
+ 16 | char *autodetect_str = env_get("mmcautodetect");
+ | ^~~~~~~
+ 41 | env_set_ulong("mmcdev", dev_no);
+ | ^~~~~~~~~~~~~
+ 46 | env_set("mmcroot", mmcblk);
+ | ^~~~~~~
+ 49 | run_command(cmd, 0);
+ | ^~~~~~~~~~~
+ 46 | arch_cpu_init();
+ | arch_misc_init
+ 48 | board_early_init_f();
+ | ^~~~~~~~~~~~~~~~~~
+ 50 | timer_init();
+ | ^~~~~~~~~~
+ 75 | board_init_r(NULL, 0);
+ | ^~~~~~~~~~~~
+ | board_init_fw+board/congatec/cgtqmx8/cgtqmx8.c: In function 'board_mmc_init':w+board/congatec/cgtqmx8/cgtqmx8.c:174:9: warning: implicit declaration of function 'power_domain_lookup_name'; did you mean 'imx8_power_domain_lookup_name'? [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/cgtqmx8.c:178:4: warning: implicit declaration of function 'init_clk_usdhc' [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/cgtqmx8.c:208:9: warning: implicit declaration of function 'fsl_esdhc_initialize'; did you mean 'fecmxc_initialize'? [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/cgtqmx8.c: In function 'board_eth_init':w+board/congatec/cgtqmx8/cgtqmx8.c:278:22: warning: unused variable 'pd0' [-Wunused-variable] w+board/congatec/cgtqmx8/cgtqmx8.c: In function 'board_late_init':w+board/congatec/cgtqmx8/cgtqmx8.c:442:2: warning: implicit declaration of function 'board_late_mmc_env_init'; did you mean 'board_late_init'? [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/cgtqmx8.c:287:5: warning: 'ret' is used uninitialized in this function [-Wuninitialized] w+board/congatec/common/mmc.c: In function 'check_mmc_autodetect':w+board/congatec/common/mmc.c:16:25: warning: implicit declaration of function 'env_get' [-Wimplicit-function-declaration] w+board/congatec/common/mmc.c:16:25: warning: initialization of 'char *' from 'int' makes pointer from integer without a cast [-Wint-conversion] w+board/congatec/common/mmc.c: In function 'board_late_mmc_env_init':w+board/congatec/common/mmc.c:41:2: warning: implicit declaration of function 'env_set_ulong' [-Wimplicit-function-declaration] w+board/congatec/common/mmc.c:46:2: warning: implicit declaration of function 'env_set' [-Wimplicit-function-declaration] w+board/congatec/common/mmc.c:49:2: warning: implicit declaration of function 'run_command' [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/spl.c: In function 'spl_board_init':w+board/congatec/cgtqmx8/spl.c:46:2: warning: implicit declaration of function 'arch_cpu_init'; did you mean 'arch_misc_init'? [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/spl.c:48:2: warning: implicit declaration of function 'board_early_init_f' [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/spl.c:50:2: warning: implicit declaration of function 'timer_init' [-Wimplicit-function-declaration] w+board/congatec/cgtqmx8/spl.c: In function 'board_init_f':w+board/congatec/cgtqmx8/spl.c:75:2: warning: implicit declaration of function 'board_init_r'; did you mean 'board_init_f'? [-Wimplicit-function-declaration]
Can you fix them and repost it ? Thanks !
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 2/2 hack to boot with 2020.01
In reply to Oliver GrauteAs proposed here:
https://lists.denx.de/pipermail/u-boot/2020-January/396749.html
Both of my imx8qm boards (Advantech and Congatec) aren't booting 2020.01 without this change. Whats the proper way to fix this on my side?
--- drivers/core/device.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/core/device.c +2 -5
@@ -448,11 +448,8 @@ int device_probe(struct udevice *dev)if (CONFIG_IS_ENABLED (POWER_DOMAIN ) && dev->parent && (device_get_uclass_id (dev) !=UCLASS_POWER_DOMAIN ) && - !(drv->flags &DM_FLAG_DEFAULT_PD_CTRL_OFF )) { - ret =dev_power_domain_on (dev); -if (ret) - goto fail; - } + !(drv->flags &DM_FLAG_DEFAULT_PD_CTRL_OFF )) +dev_power_domain_on (dev); ret =uclass_pre_probe_device (dev);if (ret)
Signature · 1 line
2.17.1
PATCH 2/2 hack to boot with 2020.01
Quoted 6 lines · Oliver Graute
As proposed here:
https://lists.denx.de/pipermail/u-boot/2020-January/396749.html
Both of my imx8qm boards (Advantech and Congatec) aren't booting 2020.01 without this change. Whats the proper way to fix this on my side?
Did you mean to say something newer than that? I thought something around here had finally been debugged and fixed at least in some of the failing cases. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200616/faf22f9b/attachment.sig>
v3 cover imx: support for conga-QMX8 board
In reply to Oliver GrauteQuoted 41 lines · Oliver Graute
Second patch is still needed for booting. Tipps to get rid of that patch would be helpfull.
Between u-boot-imx-20200511 and u-boot-imx-20200609 something more is broken, I run into this issue:
U-Boot 2020.07-rc3-00002-gbf3f929aa6 (Jun 16 2020 - 14:36:58 +0200)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiBDevice 'gpio at
5d090000': seq 0 is in use by 'gpio at5d080000' Device 'gpio at5d0a0000': seq 1 is in use by 'gpio at5d090000'
MMC:FSL_SDHC: 0,FSL_SDHC: 1,FSL_SDHC: 2
Loading Environment from MMC... OKIn: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000"Synchronous Abort" handler, esr
0x96000004
elr:000000008005cf48lr :0000000080022f94(reloc)
elr:00000000fff22f48lr :00000000ffee8f94x0 :fffffffffdaf3540x1 :00000000fff2d8a0x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 :fffffffffdaf3540x6 :00000000fff068a8x7 :00000000fff3bca0x8 :00000000fdaf3ac0x9 : 0000000000000008
x10:00000000fdaecb30x11:00000000fdaefdd0
x12: 0000000000000000 x13: 0000000000000200
x14:00000000fdadebf8x15:00000000ffffffff
x16: 0000000000001080 x17: 0000000000000000
x18:00000000fdae4da0x19: 0000000000000002
x20:00000000fff3b000x21:000000007fec6000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29:00000000fdadfd90
Quoted 4 lines
Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)Resetting CPU ...
resetting ...
Currently I try to rebase this patch to v2020.10. But still run into crashes. After some fun with bisect I could blame this commit:
commit 09140113108541b95d340f3c7b6ee597d31ccc73
Author: Simon Glass <[email protected]> Date: Sun May 10 11:40:03 2020 -0600
command: Remove the cmd_tbl_t typedef
09140113108541b95d340f3c7b6ee597d31ccc73 BAD 691d719db7183dfb1d1360efed4c5e9f6899095f GOOD
But I assume that I need to fix something on my patch. Perhaps someone could comment and help me on this.
Best regards,
Oliver
U-Boot 2020.07-rc2-00147-g17a341f285 (Nov 04 2020 - 16:13:36 +0100)
sc_pm_get_clock_rate: resource:507 clk:2: res:3 Could not read CPU frequency: -22
CPU: NXP i.MX8QM RevB A35 at 0 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB
Device 'gpio at 5d090000': seq 0 is in use by 'gpio at 5d080000' Device 'gpio at 5d0a0000': seq 1 is in use by 'gpio at 5d090000'
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000
"Synchronous Abort" handler, esr 0x96000004
elr: 000000008005cf54 lr : 0000000080022f94 (reloc)
elr: 00000000fff22f54 lr : 00000000ffee8f94 x0 : fffffffffdaf0e40 x1 : 00000000fff2d89f x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 : fffffffffdaf0e40 x6 : 00000000fff068f4 x7 : 00000000fff3bca0 x8 : 00000000fdaf1390 x9 : 0000000000000008
x10: 00000000fdaec9a0 x11: 00000000fdaee528
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fdadebf8 x15: 00000000ffffffff
x16: 0000000000001080 x17: 0000000000000000
x18: 00000000fdae4da0 x19: 0000000000000002
x20: 00000000fff3b000 x21: 000000007fec6000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000fdadfd90
Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)
Resetting CPU ...
resetting ...