spi: kirkwood: dm-conversion (part4)
Subsystems (3)
v3 cover spi: kirkwood: dm-conversion (part4)
Series of kirkwood boards to switch DM_SPI and drop which are not DM enabled still.
Any inputs?
Jagan.
Bhargav Shah (1):
spi: kirkwood: Drop nondm code
Jagan Teki (3):
arm: Remove d2net_v2 board
db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH
arm: Remove netspace_v2 board
arch/arm/mach-kirkwood/Kconfig | 8 - board/LaCie/net2big_v2/Kconfig | 12 - board/LaCie/net2big_v2/MAINTAINERS | 7 - board/LaCie/net2big_v2/Makefile | 13 -- board/LaCie/net2big_v2/kwbimage.cfg | 149 ------------- board/LaCie/net2big_v2/net2big_v2.c | 257 ---------------------- board/LaCie/net2big_v2/net2big_v2.h | 28 --- board/LaCie/netspace_v2/Kconfig | 12 - board/LaCie/netspace_v2/MAINTAINERS | 14 -- board/LaCie/netspace_v2/Makefile | 10 - board/LaCie/netspace_v2/kwbimage-is2.cfg | 149 ------------- board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 149 ------------- board/LaCie/netspace_v2/kwbimage.cfg | 149 ------------- board/LaCie/netspace_v2/netspace_v2.c | 120 ---------- board/LaCie/netspace_v2/netspace_v2.h | 22 -- configs/d2net_v2_defconfig | 53 ----- configs/db-88f6281-bp-nand_defconfig | 4 +- configs/inetspace_v2_defconfig | 53 ----- configs/net2big_v2_defconfig | 53 ----- configs/netspace_lite_v2_defconfig | 53 ----- configs/netspace_max_v2_defconfig | 53 ----- configs/netspace_mini_v2_defconfig | 48 ---- configs/netspace_v2_defconfig | 53 ----- drivers/spi/Kconfig | 12 +- drivers/spi/kirkwood_spi.c | 136 ++---------- include/configs/lacie_kw.h | 152 ------------- scripts/config_whitelist.txt | 1 - 27 files changed, 21 insertions(+), 1749 deletions(-) delete mode 100644 board/LaCie/net2big_v2/Kconfig delete mode 100644 board/LaCie/net2big_v2/MAINTAINERS delete mode 100644 board/LaCie/net2big_v2/Makefile delete mode 100644 board/LaCie/net2big_v2/kwbimage.cfg delete mode 100644 board/LaCie/net2big_v2/net2big_v2.c delete mode 100644 board/LaCie/net2big_v2/net2big_v2.h delete mode 100644 board/LaCie/netspace_v2/Kconfig delete mode 100644 board/LaCie/netspace_v2/MAINTAINERS delete mode 100644 board/LaCie/netspace_v2/Makefile delete mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage.cfg delete mode 100644 board/LaCie/netspace_v2/netspace_v2.c delete mode 100644 board/LaCie/netspace_v2/netspace_v2.h delete mode 100644 configs/d2net_v2_defconfig delete mode 100644 configs/inetspace_v2_defconfig delete mode 100644 configs/net2big_v2_defconfig delete mode 100644 configs/netspace_lite_v2_defconfig delete mode 100644 configs/netspace_max_v2_defconfig delete mode 100644 configs/netspace_mini_v2_defconfig delete mode 100644 configs/netspace_v2_defconfig delete mode 100644 include/configs/lacie_kw.h
Signature · 1 line
2.25.1
PATCH v3 1/4 spi: kirkwood: Drop nondm code
From: Bhargav Shah <[email protected]>
Drop the nondm code from kirkwood_spi.c since there is no board or any other code using for it.
---
Changes for v3:
- updated commit message
- updated config_whitelist.txt
drivers/spi/Kconfig | 12 ++-- drivers/spi/kirkwood_spi.c | 136 ++++------------------------------- scripts/config_whitelist.txt | 1 - 3 files changed, 19 insertions(+), 130 deletions(-)
drivers/spi/Kconfig +6 -6
@@ -162,6 +162,12 @@ config ICH_SPI access the SPI NOR flash on platforms embedding this Intel ICH IP core. +config KIRKWOOD_SPI + bool "Marvell Kirkwood SPI Driver" + help + Enable support for SPI on various Marvell SoCs, such as + Kirkwood and Armada 375. + config MESON_SPIFC bool "Amlogic Meson SPI Flash Controller driver" depends on ARCH_MESON
@@ -417,12 +423,6 @@ config SH_QSPI Enable the Renesas Quad SPI controller driver. This driver can be used on Renesas SoCs. -config KIRKWOOD_SPI - bool "Marvell Kirkwood SPI Driver" - help - Enable support for SPI on various Marvell SoCs, such as - Kirkwood and Armada 375. - config MXC_SPI bool "MXC SPI Driver" help
drivers/spi/kirkwood_spi.c +13 -123
151 lines not on this page · raw message
scripts/config_whitelist.txt +0 -1
@@ -1619,7 +1619,6 @@ CONFIG_SPEAR_USBBOOT CONFIG_SPEAR_USBTTY CONFIG_SPI_ADDR CONFIG_SPI_BOOTING -CONFIG_SPI_CS_IS_VALID CONFIG_SPI_DATAFLASH_WRITE_VERIFY CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE
Signature · 1 line
2.25.1
PATCH v3 2/4 arm: Remove d2net_v2 board
In reply to Jagan TekiThis board has not been converted to CONFIG_DM by the deadline.
Remove it.
---
Changes for v3:
- new patch
arch/arm/mach-kirkwood/Kconfig | 4 - board/LaCie/net2big_v2/Kconfig | 12 -- board/LaCie/net2big_v2/MAINTAINERS | 7 - board/LaCie/net2big_v2/Makefile | 13 -- board/LaCie/net2big_v2/kwbimage.cfg | 149 ---------------- board/LaCie/net2big_v2/net2big_v2.c | 257 ---------------------------- board/LaCie/net2big_v2/net2big_v2.h | 28 --- configs/d2net_v2_defconfig | 53 ------ configs/net2big_v2_defconfig | 53 ------ include/configs/lacie_kw.h | 152 ---------------- 10 files changed, 728 deletions(-) delete mode 100644 board/LaCie/net2big_v2/Kconfig delete mode 100644 board/LaCie/net2big_v2/MAINTAINERS delete mode 100644 board/LaCie/net2big_v2/Makefile delete mode 100644 board/LaCie/net2big_v2/kwbimage.cfg delete mode 100644 board/LaCie/net2big_v2/net2big_v2.c delete mode 100644 board/LaCie/net2big_v2/net2big_v2.h delete mode 100644 configs/d2net_v2_defconfig delete mode 100644 configs/net2big_v2_defconfig delete mode 100644 include/configs/lacie_kw.h
arch/arm/mach-kirkwood/Kconfig +0 -4
@@ -35,9 +35,6 @@ config TARGET_KM_KIRKWOOD bool "KM Kirkwood Board" select VENDOR_KM -config TARGET_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - config TARGET_NETSPACE_V2 bool "LaCie netspace_v2 Board"
@@ -80,7 +77,6 @@ source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/keymile/Kconfig" -source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig"
board/LaCie/net2big_v2/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_NET2BIG_V2 - -config SYS_BOARD - default "net2big_v2" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "lacie_kw" - -endif
board/LaCie/net2big_v2/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -NET2BIG_V2 BOARD -M: Simon Guinot <[email protected]> -S: Maintained -F: board/LaCie/net2big_v2/ -F: include/configs/lacie_kw.h -F: configs/d2net_v2_defconfig -F: configs/net2big_v2_defconfig
board/LaCie/net2big_v2/Makefile deleted +0 -13
@@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := net2big_v2.o ../common/common.o -ifneq ($(and $(CONFIG_KIRKWOOD_GPIO),$(CONFIG_NET2BIG_V2)),) -obj-y += ../common/cpld-gpio-bus.o -endif
board/LaCie/net2big_v2/kwbimage.cfg deleted +0 -149
149 lines not on this page · raw message
board/LaCie/net2big_v2/net2big_v2.c deleted +0 -257
257 lines not on this page · raw message
board/LaCie/net2big_v2/net2big_v2.h deleted +0 -28
@@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -* -* Based on Kirkwood support: -* (C) Copyright 2009 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Prafulla Wadaskar <[email protected]> -*/ - -#ifndef NET2BIG_V2_H -#define NET2BIG_V2_H - -/* GPIO configuration */ -#define NET2BIG_V2_OE_LOW 0x0600E000 -#define NET2BIG_V2_OE_HIGH 0x00000134 -#define NET2BIG_V2_OE_VAL_LOW 0x10030000 -#define NET2BIG_V2_OE_VAL_HIGH 0x00000000 - -/* Buttons */ -#define NET2BIG_V2_GPIO_PUSH_BUTTON 34 - -/* GMT G762 registers (I2C fan controller) */ -#define G762_REG_SET_CNT 0x00 -#define G762_REG_SET_OUT 0x03 -#define G762_REG_FAN_CMD1 0x04 - -#endif /* NET2BIG_V2_H */
configs/d2net_v2_defconfig deleted +0 -53
53 lines not on this page · raw message
configs/net2big_v2_defconfig deleted +0 -53
53 lines not on this page · raw message
include/configs/lacie_kw.h deleted +0 -152
152 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v3 2/4 arm: Remove d2net_v2 board
On Thu, Jun 18, 2020 at 11:15:14PM +0530, Jagan Teki wrote:
Hi Jagan,
Quoted 1 line
This board has not been converted to
CONFIG_DMby the deadline.
Is that possible to negociate a new deadline ?
Thanks in advance.
Simon
Quoted 832 lines
Remove it.
Cc Simon Guinot <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v3:
- new patcharch/arm/mach-kirkwood/Kconfig | 4 - board/LaCie/net2big_v2/Kconfig | 12 -- board/LaCie/net2big_v2/MAINTAINERS | 7 - board/LaCie/net2big_v2/Makefile | 13 -- board/LaCie/net2big_v2/kwbimage.cfg | 149 ---------------- board/LaCie/net2big_v2/net2big_v2.c | 257 ---------------------------- board/LaCie/net2big_v2/net2big_v2.h | 28 --- configs/d2net_v2_defconfig | 53 ------ configs/net2big_v2_defconfig | 53 ------ include/configs/lacie_kw.h | 152 ---------------- 10 files changed, 728 deletions(-) delete mode 100644 board/LaCie/net2big_v2/Kconfig delete mode 100644 board/LaCie/net2big_v2/MAINTAINERS delete mode 100644 board/LaCie/net2big_v2/Makefile delete mode 100644 board/LaCie/net2big_v2/kwbimage.cfg delete mode 100644 board/LaCie/net2big_v2/net2big_v2.c delete mode 100644 board/LaCie/net2big_v2/net2big_v2.h delete mode 100644 configs/d2net_v2_defconfig delete mode 100644 configs/net2big_v2_defconfig delete mode 100644 include/configs/lacie_kw.harch/arm/mach-kirkwood/Kconfig +0
-4@@ -35,9 +35,6 @@ config TARGET_KM_KIRKWOOD bool "KM Kirkwood Board" select VENDOR_KM -config TARGET_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - config TARGET_NETSPACE_V2 bool "LaCie netspace_v2 Board"@@ -80,7 +77,6 @@ source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/keymile/Kconfig" -source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig"board/LaCie/net2big_v2/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_NET2BIG_V2 - -config SYS_BOARD - default "net2big_v2" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "lacie_kw" - -endifboard/LaCie/net2big_v2/MAINTAINERS deleted +0
-7@@ -1,7 +0,0 @@ -NET2BIG_V2 BOARD -M: Simon Guinot <[email protected]> -S: Maintained -F: board/LaCie/net2big_v2/ -F: include/configs/lacie_kw.h -F: configs/d2net_v2_defconfig -F: configs/net2big_v2_defconfigboard/LaCie/net2big_v2/Makefile deleted +0
-13@@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := net2big_v2.o ../common/common.o -ifneq ($(and $(CONFIG_KIRKWOOD_GPIO),$(CONFIG_NET2BIG_V2)),) -obj-y += ../common/cpld-gpio-bus.o -endifboard/LaCie/net2big_v2/kwbimage.cfg deleted +0
-149@@ -1,149 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000C30 # DDR Configuration register -# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x38743000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000A32 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x0000CCCC # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000662 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000044 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strenght reduced -# bit2: 1, DDR ODT control lsd enabled -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, enabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 1 , D2P Latency enabled -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x07, Size (i.e. 128MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 -# bit11-10:1, DQ_ODTSel. ODT select turned on - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0board/LaCie/net2big_v2/net2big_v2.c deleted +0
-257@@ -1,257 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -* -* Based on Kirkwood support: -* (C) Copyright 2009 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Prafulla Wadaskar <[email protected]> -*/ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <i2c.h> -#include <init.h> -#include <net.h> -#include <asm/mach-types.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/arch/gpio.h> - -#include "net2big_v2.h" -#include "../common/common.h" -#include "../common/cpld-gpio-bus.h" - -DECLARE_GLOBAL_DATA_PTR ; - -int board_early_init_f (void ) -{ -/* GPIO configuration */ -mvebu_config_gpio (NET2BIG_V2_OE_VAL_LOW ,NET2BIG_V2_OE_VAL_HIGH , -NET2BIG_V2_OE_LOW ,NET2BIG_V2_OE_HIGH ); - -/* Multi-Purpose Pins Functionality configuration */ -static const u32 kwmpp_config[] = { - MPP0_SPI_SCn, -MPP1_SPI_MOSI , -MPP2_SPI_SCK , -MPP3_SPI_MISO , - MPP6_SYSRST_OUTn, -MPP7_GPO ,/* Request power-off */ -MPP8_TW_SDA , -MPP9_TW_SCK , -MPP10_UART0_TXD , -MPP11_UART0_RXD , -MPP13_GPIO ,/* Rear power switch (on|auto) */ -MPP14_GPIO ,/* USB fuse alarm */ -MPP15_GPIO ,/* Rear power switch (auto|off) */ -MPP16_GPIO ,/* SATA HDD1 power */ -MPP17_GPIO ,/* SATA HDD2 power */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, -MPP24_GPIO ,/* USB mode select */ -MPP26_GPIO ,/* USB device vbus */ -MPP28_GPIO ,/* USB enable host vbus */ -MPP29_GPIO ,/* CPLD GPIO bus ALE */ -MPP34_GPIO ,/* Rear Push button 0=on 1=off */ -MPP35_GPIO ,/* Inhibit switch power-off */ -MPP36_GPIO ,/* SATA HDD1 presence */ -MPP37_GPIO ,/* SATA HDD2 presence */ -MPP40_GPIO ,/* eSATA presence */ -MPP44_GPIO ,/* CPLD GPIO bus (data 0) */ -MPP45_GPIO ,/* CPLD GPIO bus (data 1) */ -MPP46_GPIO ,/* CPLD GPIO bus (data 2) */ -MPP47_GPIO ,/* CPLD GPIO bus (addr 0) */ -MPP48_GPIO ,/* CPLD GPIO bus (addr 1) */ -MPP49_GPIO ,/* CPLD GPIO bus (addr 2) */ -0 - }; - -kirkwood_mpp_conf (kwmpp_config,NULL ); - -return 0 ; -} - -int board_init (void ) -{ -/* Machine number */ - gd->bd->bi_arch_number =MACH_TYPE_NET2BIG_V2 ; - -/* Boot parameters address */ - gd->bd->bi_boot_params =mvebu_sdram_bar (0 ) +0x100 ; - -return 0 ; -} - -#if defined(CONFIG_MISC_INIT_R ) - -#if defined(CONFIG_CMD_I2C ) && defined(CONFIG_SYS_I2C_G762_ADDR ) -/* -* Start I2C fan (GMT G762 controller) -*/ -static void init_fan (void ) -{ -u8 data; - -i2c_set_bus_num (0 ); - -/* Enable open-loop and PWM modes */ - data =0x20 ; -if (i2c_write (CONFIG_SYS_I2C_G762_ADDR , -G762_REG_FAN_CMD1 ,1 , &data,1 ) !=0 ) - goto err; - data =0 ; -if (i2c_write (CONFIG_SYS_I2C_G762_ADDR , -G762_REG_SET_CNT ,1 , &data,1 ) !=0 ) - goto err; -/* -* RPM to PWM (set_out register) fan speed conversion array: -* 0 0x00 -* 1500 0x04 -* 2800 0x08 -* 3400 0x0C -* 3700 0x10 -* 4400 0x20 -* 4700 0x30 -* 4800 0x50 -* 5200 0x80 -* 5400 0xC0 -* 5500 0xFF -* -* Start fan at low speed (2800 RPM): -*/ - data =0x08 ; -if (i2c_write (CONFIG_SYS_I2C_G762_ADDR , -G762_REG_SET_OUT ,1 , &data,1 ) !=0 ) - goto err; - -return ; -err: -printf ("Error: failed to start I2C fan @%02x\n" , -CONFIG_SYS_I2C_G762_ADDR ); -} -#else -static void init_fan (void ) {} -#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_G762_ADDR */ - -#if defined(CONFIG_NET2BIG_V2 ) && defined(CONFIG_KIRKWOOD_GPIO ) -/* -* CPLD GPIO bus: -* -* - address register : bit [0-2] -> GPIO [47-49] -* - data register : bit [0-2] -> GPIO [44-46] -* - enable register : GPIO 29 -*/ -static unsigned cpld_gpio_bus_addr[] = {47 ,48 ,49 }; -static unsigned cpld_gpio_bus_data[] = {44 ,45 ,46 }; - -static struct cpld_gpio_bus cpld_gpio_bus = { - .addr = cpld_gpio_bus_addr, - .num_addr =ARRAY_SIZE (cpld_gpio_bus_addr), - .data = cpld_gpio_bus_data, - .num_data =ARRAY_SIZE (cpld_gpio_bus_data), - .enable =29 , -}; - -/* -* LEDs configuration: -* -* The LEDs are controlled by a CPLD and can be configured through -* the CPLD GPIO bus. -* -* Address register selection: -* -* addr | register -* ---------------------------- -* 0 | front LED -* 1 | front LED brightness -* 2 | SATA LED brightness -* 3 | SATA0 LED -* 4 | SATA1 LED -* 5 | SATA2 LED -* 6 | SATA3 LED -* 7 | SATA4 LED -* -* Data register configuration: -* -* data | LED brightness -* ------------------------------------------------- -* 0 | min (off) -* - | - -* 7 | max -* -* data | front LED mode -* ------------------------------------------------- -* 0 | fix off -* 1 | fix blue on -* 2 | fix red on -* 3 | blink blue on=1 sec and blue off=1 sec -* 4 | blink red on=1 sec and red off=1 sec -* 5 | blink blue on=2.5 sec and red on=0.5 sec -* 6 | blink blue on=1 sec and red on=1 sec -* 7 | blink blue on=0.5 sec and blue off=2.5 sec -* -* data | SATA LED mode -* ------------------------------------------------- -* 0 | fix off -* 1 | SATA activity blink -* 2 | fix red on -* 3 | blink blue on=1 sec and blue off=1 sec -* 4 | blink red on=1 sec and red off=1 sec -* 5 | blink blue on=2.5 sec and red on=0.5 sec -* 6 | blink blue on=1 sec and red on=1 sec -* 7 | fix blue on -*/ -static void init_leds (void ) -{ -/* Enable the front blue LED */ -cpld_gpio_bus_write (&cpld_gpio_bus,0 ,1 ); -cpld_gpio_bus_write (&cpld_gpio_bus,1 ,3 ); - -/* Configure SATA LEDs to blink in relation with the SATA activity */ -cpld_gpio_bus_write (&cpld_gpio_bus,3 ,1 ); -cpld_gpio_bus_write (&cpld_gpio_bus,4 ,1 ); -cpld_gpio_bus_write (&cpld_gpio_bus,2 ,3 ); -} -#else -static void init_leds (void ) {} -#endif /* CONFIG_NET2BIG_V2 && CONFIG_KIRKWOOD_GPIO */ - -int misc_init_r (void ) -{ -init_fan (); -#if defined(CONFIG_CMD_I2C ) && defined(CONFIG_SYS_I2C_EEPROM_ADDR ) -if (!env_get ("ethaddr" )) { -uchar mac[6 ]; -if (lacie_read_mac_address (mac) ==0 ) -eth_env_set_enetaddr ("ethaddr" , mac); - } -#endif -init_leds (); - -return 0 ; -} -#endif /* CONFIG_MISC_INIT_R */ - -#if defined(CONFIG_CMD_NET ) && defined(CONFIG_RESET_PHY_R ) -/* Configure and initialize PHY */ -void reset_phy (void ) -{ -mv_phy_88e1116_init ("egiga0" ,8 ); -} -#endif - -#if defined(CONFIG_KIRKWOOD_GPIO ) -/* Return GPIO push button status */ -static int -do_read_push_button (struct cmd_tbl *cmdtp,int flag,int argc, -char *const argv[]) -{ -return !kw_gpio_get_value (NET2BIG_V2_GPIO_PUSH_BUTTON ); -} - -U_BOOT_CMD (button,1 ,1 , do_read_push_button, -"Return GPIO push button status 0=off 1=on" ,"" ); -#endif board/LaCie/net2big_v2/net2big_v2.h deleted +0
-28@@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -* -* Based on Kirkwood support: -* (C) Copyright 2009 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Prafulla Wadaskar <[email protected]> -*/ - -#ifndef NET2BIG_V2_H -#define NET2BIG_V2_H - -/* GPIO configuration */ -#define NET2BIG_V2_OE_LOW 0x0600E000 -#define NET2BIG_V2_OE_HIGH 0x00000134 -#define NET2BIG_V2_OE_VAL_LOW 0x10030000 -#define NET2BIG_V2_OE_VAL_HIGH 0x00000000 - -/* Buttons */ -#define NET2BIG_V2_GPIO_PUSH_BUTTON 34 - -/* GMT G762 registers (I2C fan controller) */ -#define G762_REG_SET_CNT 0x00 -#define G762_REG_SET_OUT 0x03 -#define G762_REG_FAN_CMD1 0x04 - -#endif /* NET2BIG_V2_H */ configs/d2net_v2_defconfig deleted +0
-53@@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NET2BIG_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" D2 v2" -CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="d2v2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=yconfigs/net2big_v2_defconfig deleted +0
-53@@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NET2BIG_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" 2Big v2" -CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="2big2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=yinclude/configs/lacie_kw.h deleted +0
-152@@ -1,152 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -*/ - -#ifndef _CONFIG_LACIE_KW_H -#define _CONFIG_LACIE_KW_H - -/* -* Machine number definition -*/ -#if defined(CONFIG_INETSPACE_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2 -#elif defined(CONFIG_NETSPACE_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2 -#elif defined(CONFIG_NETSPACE_LITE_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2 -#elif defined(CONFIG_NETSPACE_MINI_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2 -#elif defined(CONFIG_NETSPACE_MAX_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 -#elif defined(CONFIG_D2NET_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2 -#elif defined(CONFIG_NET2BIG_V2 ) -#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 -#else -#error "Unknown board" -#endif - -/* -* High Level Configuration Options (easy to change) -*/ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -/* SoC name */ -#if defined(CONFIG_NETSPACE_LITE_V2 ) || defined(CONFIG_NETSPACE_MINI_V2 ) -#define CONFIG_KW88F6192 -#else -#define CONFIG_KW88F6281 -#endif -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* -* Core clock definition -*/ -#define CONFIG_SYS_TCLK 166000000/* 166MHz */ - -/* -* SDRAM configuration -*/ - -/* -* Different SDRAM configuration and size for some of the boards derived -* from the Network Space v2 -*/ -#if defined(CONFIG_INETSPACE_V2 ) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg -#elif defined(CONFIG_NETSPACE_LITE_V2 ) || defined(CONFIG_NETSPACE_MINI_V2 ) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg -#endif - -/* -* mv-common.h should be defined after CMD configs since it used them -* to enable certain macros -*/ -#include "mv-common.h" - -/* Remove or override few declarations from mv-common.h */ -#undef CONFIG_SYS_IDE_MAXBUS -#undef CONFIG_SYS_IDE_MAXDEVICE - -/* -* Enable platform initialisation via misc_init_r() function -*/ - -/* -* Ethernet Driver configuration -*/ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0}/* enable port 0 only */ -#define CONFIG_NETCONSOLE -#endif - -/* -* SATA Driver configuration -*/ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#if defined(CONFIG_NETSPACE_MAX_V2 ) || defined(CONFIG_D2NET_V2 ) || \ - defined(CONFIG_NET2BIG_V2 ) -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 2 -#else -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#endif -#endif /* CONFIG_MVSATA_IDE */ - -/* -* Enable GPI0 support -*/ -#define CONFIG_KIRKWOOD_GPIO - -/* -* Enable I2C support -*/ -#ifdef CONFIG_CMD_I2C -/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4/* 16-byte page size */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1/* 8-bit device address */ -#if defined(CONFIG_NET2BIG_V2 ) -#define CONFIG_SYS_I2C_G762_ADDR 0x3e -#endif -#endif /* CONFIG_CMD_I2C */ - -/* -* Partition support -*/ - -/* -* File systems support -*/ - -/* -* Environment variables configurations -*/ - -/* -* Default environment variables -*/ -#define CONFIG_BOOTCOMMAND \ - "dhcp && run netconsole; " \ - "if run usbload || run diskload; then bootm; fi" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "bootfile=uImage\0" \ - "loadaddr=0x800000\0" \ - "autoload=no\0" \ - "netconsole=" \ - "set stdin $stdin,nc; " \ - "set stdout $stdout,nc; " \ - "set stderr $stderr,nc;\0" \ - "diskload=ide reset && " \ - "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ - "usbload=usb start && " \ - "fatload usb 0:1 $loadaddr /boot/$bootfile\0" - -#endif /* _CONFIG_LACIE_KW_H */ Signature · 1 line
2.25.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200619/7f85313c/attachment.sig>
PATCH v3 2/4 arm: Remove d2net_v2 board
Quoted 6 lines · Simon Guinot
On Thu, Jun 18, 2020 at 11:15:14PM +0530, Jagan Teki wrote:
Hi Jagan,Quoted 1 line
This board has not been converted to
CONFIG_DMby the deadline.Is that possible to negociate a new deadline ?
Well, when will you be able to spend some time bringing the platform up to current standards? Doing a quick build for net2big_v2 I see:
+(net2big_v2) ===================== WARNING ====================== +(net2big_v2) This board does not use CONFIG_DM. CONFIG_DM will be +(net2big_v2) compulsory starting with the v2020.01 release. +(net2big_v2) Failure to update may result in board removal. +(net2big_v2) See doc/driver-model/migration.rst for more info. +(net2big_v2) ==================================================== +(net2big_v2) This board does not use CONFIG_DM_USB. Please update +(net2big_v2) the board to use CONFIG_DM_USB before the v2019.07 release. +(net2big_v2) Failure to update by the deadline may result in board removal. +(net2big_v2) This board does use CONFIG_MVSATA_IDE which is not +(net2big_v2) ported to driver-model (DM) yet. Please update the storage +(net2big_v2) controller driver to use CONFIG_AHCI before the v2019.07 +(net2big_v2) release.
+(net2big_v2) This board does not use CONFIG_DM_SPI_FLASH. Please update +(net2big_v2) the board to use CONFIG_SPI_FLASH before the v2019.07 release. +(net2big_v2) This board does not use CONFIG_DM_ETH (Driver Model +(net2big_v2) for Ethernet drivers). Please update the board to use +(net2big_v2) CONFIG_DM_ETH before the v2020.07 release. Failure to +(net2big_v2) update by the deadline may result in board removal.
So there's a lot of stuff that needs updating. Conversion to CONFIG_DM is what you'll need to then convert SPI, ETH and USB to use DM and the IDE driver also needs attention and conversion. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200618/9bffc35d/attachment.sig>
PATCH v3 2/4 arm: Remove d2net_v2 board
Quoted 30 lines · Tom Rini
Quoted 6 lines · Simon Guinot
On Thu, Jun 18, 2020 at 11:15:14PM +0530, Jagan Teki wrote:
Hi Jagan,Quoted 1 line
This board has not been converted to
CONFIG_DMby the deadline.Is that possible to negociate a new deadline ?
Well, when will you be able to spend some time bringing the platform up to current standards? Doing a quick build for
net2big_v2I see:(quoted diff) +19
-0+(net2big_v2) ===================== WARNING ====================== +(net2big_v2) This board does not use CONFIG_DM. CONFIG_DM will be +(net2big_v2) compulsory starting with the v2020.01 release. +(net2big_v2) Failure to update may result in board removal. +(net2big_v2) See doc/driver-model/migration.rst for more info. +(net2big_v2) ==================================================== +(net2big_v2) This board does not use CONFIG_DM_USB. Please update +(net2big_v2) the board to use CONFIG_DM_USB before the v2019.07 release. +(net2big_v2) Failure to update by the deadline may result in board removal. +(net2big_v2) This board does use CONFIG_MVSATA_IDE which is not +(net2big_v2) ported to driver-model (DM) yet. Please update the storage +(net2big_v2) controller driver to use CONFIG_AHCI before the v2019.07 +(net2big_v2) release. +(net2big_v2) This board does not use CONFIG_DM_SPI_FLASH. Please update +(net2big_v2) the board to use CONFIG_SPI_FLASH before the v2019.07 release. +(net2big_v2) This board does not use CONFIG_DM_ETH (Driver Model +(net2big_v2) for Ethernet drivers). Please update the board to use +(net2big_v2) CONFIG_DM_ETH before the v2020.07 release. Failure to +(net2big_v2) update by the deadline may result in board removal.
Quoted 3 lines
So there's a lot of stuff that needs updating. Conversion to
CONFIG_DMis what you'll need to then convert SPI, ETH and USB to use DM and the IDE driver also needs attention and conversion. Thanks!
Hi Tom,
I am working on it. But so far it is not going very well and the whole thing is turning into a debug session.
But I'll do my best and whatever the result will be, I'll send you an update by the end of the next week.
Is this acceptable to you ?
Thanks.
Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200620/3129d168/attachment.sig>
PATCH v3 2/4 arm: Remove d2net_v2 board
Quoted 37 lines · Simon Guinot
Quoted 30 lines · Tom Rini
Quoted 6 lines · Simon Guinot
On Thu, Jun 18, 2020 at 11:15:14PM +0530, Jagan Teki wrote:
Hi Jagan,Quoted 1 line
This board has not been converted to
CONFIG_DMby the deadline.Is that possible to negociate a new deadline ?
Well, when will you be able to spend some time bringing the platform up to current standards? Doing a quick build for
net2big_v2I see:(quoted diff) +19
-0+(net2big_v2) ===================== WARNING ====================== +(net2big_v2) This board does not use CONFIG_DM. CONFIG_DM will be +(net2big_v2) compulsory starting with the v2020.01 release. +(net2big_v2) Failure to update may result in board removal. +(net2big_v2) See doc/driver-model/migration.rst for more info. +(net2big_v2) ==================================================== +(net2big_v2) This board does not use CONFIG_DM_USB. Please update +(net2big_v2) the board to use CONFIG_DM_USB before the v2019.07 release. +(net2big_v2) Failure to update by the deadline may result in board removal. +(net2big_v2) This board does use CONFIG_MVSATA_IDE which is not +(net2big_v2) ported to driver-model (DM) yet. Please update the storage +(net2big_v2) controller driver to use CONFIG_AHCI before the v2019.07 +(net2big_v2) release. +(net2big_v2) This board does not use CONFIG_DM_SPI_FLASH. Please update +(net2big_v2) the board to use CONFIG_SPI_FLASH before the v2019.07 release. +(net2big_v2) This board does not use CONFIG_DM_ETH (Driver Model +(net2big_v2) for Ethernet drivers). Please update the board to use +(net2big_v2) CONFIG_DM_ETH before the v2020.07 release. Failure to +(net2big_v2) update by the deadline may result in board removal.Quoted 3 lines
So there's a lot of stuff that needs updating. Conversion to
CONFIG_DMis what you'll need to then convert SPI, ETH and USB to use DM and the IDE driver also needs attention and conversion. Thanks!Hi Tom,
Quoted 7 lines
I am working on it. But so far it is not going very well and the whole thing is turning into a debug session.
But I'll do my best and whatever the result will be, I'll send you an update by the end of the next week.
Is this acceptable to you ?
Yes, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200619/bbd04a2a/attachment-0001.sig>
PATCH v3 2/4 arm: Remove d2net_v2 board
Quoted 38 lines · Tom Rini
Quoted 37 lines · Simon Guinot
Quoted 30 lines · Tom Rini
Quoted 6 lines · Simon Guinot
On Thu, Jun 18, 2020 at 11:15:14PM +0530, Jagan Teki wrote:
Hi Jagan,Quoted 1 line
This board has not been converted to
CONFIG_DMby the deadline.Is that possible to negociate a new deadline ?
Well, when will you be able to spend some time bringing the platform up to current standards? Doing a quick build for
net2big_v2I see:(quoted diff) +19
-0+(net2big_v2) ===================== WARNING ====================== +(net2big_v2) This board does not use CONFIG_DM. CONFIG_DM will be +(net2big_v2) compulsory starting with the v2020.01 release. +(net2big_v2) Failure to update may result in board removal. +(net2big_v2) See doc/driver-model/migration.rst for more info. +(net2big_v2) ==================================================== +(net2big_v2) This board does not use CONFIG_DM_USB. Please update +(net2big_v2) the board to use CONFIG_DM_USB before the v2019.07 release. +(net2big_v2) Failure to update by the deadline may result in board removal. +(net2big_v2) This board does use CONFIG_MVSATA_IDE which is not +(net2big_v2) ported to driver-model (DM) yet. Please update the storage +(net2big_v2) controller driver to use CONFIG_AHCI before the v2019.07 +(net2big_v2) release. +(net2big_v2) This board does not use CONFIG_DM_SPI_FLASH. Please update +(net2big_v2) the board to use CONFIG_SPI_FLASH before the v2019.07 release. +(net2big_v2) This board does not use CONFIG_DM_ETH (Driver Model +(net2big_v2) for Ethernet drivers). Please update the board to use +(net2big_v2) CONFIG_DM_ETH before the v2020.07 release. Failure to +(net2big_v2) update by the deadline may result in board removal.Quoted 3 lines
So there's a lot of stuff that needs updating. Conversion to
CONFIG_DMis what you'll need to then convert SPI, ETH and USB to use DM and the IDE driver also needs attention and conversion. Thanks!Hi Tom,
Quoted 7 lines
Quoted 7 lines
I am working on it. But so far it is not going very well and the whole thing is turning into a debug session.
But I'll do my best and whatever the result will be, I'll send you an update by the end of the next week.
Is this acceptable to you ?
Hi Tom,
I just sent a patch series converting the LaCie boards to use DM drivers.
I apologize for missing all this DM deadlines.
Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200625/04c34ae9/attachment.sig>
PATCH v3 3/4 db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH
In reply to Jagan TekiEnable DM_SPI, DM_SPI_FLASH for db-88f6281-bp-nand board.
---
Changes for v3:
- new patch
configs/db-88f6281-bp-nand_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
configs/db-88f6281-bp-nand_defconfig +2 -2
@@ -20,7 +20,6 @@ CONFIG_CMD_DM=y CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y
@@ -43,7 +42,7 @@ CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_MARVELL=y CONFIG_DM_ETH=y
@@ -53,6 +52,7 @@ CONFIG_DM_RTC=y CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_DM_USB=y
Signature · 1 line
2.25.1
PATCH v3 3/4 db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH
Quoted 6 lines · Jagan Teki
Enable
DM_SPI,DM_SPI_FLASHfor db-88f6281-bp-nand board.Cc Chris Packham <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Applied to u-boot-spi/master
PATCH v3 4/4 arm: Remove netspace_v2 board
In reply to Jagan TekiThis board has not been converted to CONFIG_DM by the deadline.
Remove it.
Patch-cc: Simon Guinot <[email protected]>
---
Changes for v3:
- new patch
arch/arm/mach-kirkwood/Kconfig | 4 - board/LaCie/netspace_v2/Kconfig | 12 -- board/LaCie/netspace_v2/MAINTAINERS | 14 -- board/LaCie/netspace_v2/Makefile | 10 -- board/LaCie/netspace_v2/kwbimage-is2.cfg | 149 ---------------------- board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 149 ---------------------- board/LaCie/netspace_v2/kwbimage.cfg | 149 ---------------------- board/LaCie/netspace_v2/netspace_v2.c | 120 ----------------- board/LaCie/netspace_v2/netspace_v2.h | 22 ---- configs/inetspace_v2_defconfig | 53 -------- configs/netspace_lite_v2_defconfig | 53 -------- configs/netspace_max_v2_defconfig | 53 -------- configs/netspace_mini_v2_defconfig | 48 ------- configs/netspace_v2_defconfig | 53 -------- 14 files changed, 889 deletions(-) delete mode 100644 board/LaCie/netspace_v2/Kconfig delete mode 100644 board/LaCie/netspace_v2/MAINTAINERS delete mode 100644 board/LaCie/netspace_v2/Makefile delete mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage.cfg delete mode 100644 board/LaCie/netspace_v2/netspace_v2.c delete mode 100644 board/LaCie/netspace_v2/netspace_v2.h delete mode 100644 configs/inetspace_v2_defconfig delete mode 100644 configs/netspace_lite_v2_defconfig delete mode 100644 configs/netspace_max_v2_defconfig delete mode 100644 configs/netspace_mini_v2_defconfig delete mode 100644 configs/netspace_v2_defconfig
arch/arm/mach-kirkwood/Kconfig +0 -4
@@ -35,9 +35,6 @@ config TARGET_KM_KIRKWOOD bool "KM Kirkwood Board" select VENDOR_KM -config TARGET_NETSPACE_V2 - bool "LaCie netspace_v2 Board" - config TARGET_IB62X0 bool "ib62x0 Board"
@@ -77,7 +74,6 @@ source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/keymile/Kconfig" -source "board/LaCie/netspace_v2/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig"
board/LaCie/netspace_v2/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_NETSPACE_V2 - -config SYS_BOARD - default "netspace_v2" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "lacie_kw" - -endif
board/LaCie/netspace_v2/MAINTAINERS deleted +0 -14
@@ -1,14 +0,0 @@ -NETSPACE_V2 BOARD -M: Simon Guinot <[email protected]> -S: Maintained -F: board/LaCie/netspace_v2/ -F: include/configs/lacie_kw.h -F: configs/inetspace_v2_defconfig -F: configs/netspace_max_v2_defconfig -F: configs/netspace_v2_defconfig - -NETSPACE_LITE_V2 BOARD -#M: - -S: Maintained -F: configs/netspace_lite_v2_defconfig -F: configs/netspace_mini_v2_defconfig
board/LaCie/netspace_v2/Makefile deleted +0 -10
@@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := netspace_v2.o ../common/common.o
board/LaCie/netspace_v2/kwbimage-is2.cfg deleted +0 -149
149 lines not on this page · raw message
board/LaCie/netspace_v2/kwbimage-ns2l.cfg deleted +0 -149
149 lines not on this page · raw message
board/LaCie/netspace_v2/kwbimage.cfg deleted +0 -149
149 lines not on this page · raw message
board/LaCie/netspace_v2/netspace_v2.c deleted +0 -120
120 lines not on this page · raw message
board/LaCie/netspace_v2/netspace_v2.h deleted +0 -22
@@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -* -* Based on Kirkwood support: -* (C) Copyright 2009 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Prafulla Wadaskar <[email protected]> -*/ - -#ifndef NETSPACE_V2_H -#define NETSPACE_V2_H - -/* GPIO configuration */ -#define NETSPACE_V2_OE_LOW 0x06004000 -#define NETSPACE_V2_OE_HIGH 0x00000031 -#define NETSPACE_V2_OE_VAL_LOW 0x10030000 -#define NETSPACE_V2_OE_VAL_HIGH 0x00000000 - -#define NETSPACE_V2_GPIO_BUTTON 32 - -#endif /* NETSPACE_V2_H */
configs/inetspace_v2_defconfig deleted +0 -53
53 lines not on this page · raw message
configs/netspace_lite_v2_defconfig deleted +0 -53
53 lines not on this page · raw message
configs/netspace_max_v2_defconfig deleted +0 -53
53 lines not on this page · raw message
configs/netspace_mini_v2_defconfig deleted +0 -48
48 lines not on this page · raw message
configs/netspace_v2_defconfig deleted +0 -53
53 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v3 4/4 arm: Remove netspace_v2 board
Quoted 1 line · Jagan Teki
This board has not been converted to
CONFIG_DMby the deadline.
I am working at converting this board too, along with net2big_v2.
Simon
Quoted 1,025 lines
Remove it.
Patch-cc: Simon Guinot <[email protected]>
Signed-off-by Jagan Teki <[email protected]>---
Changes for v3:
- new patcharch/arm/mach-kirkwood/Kconfig | 4 - board/LaCie/netspace_v2/Kconfig | 12 -- board/LaCie/netspace_v2/MAINTAINERS | 14 -- board/LaCie/netspace_v2/Makefile | 10 -- board/LaCie/netspace_v2/kwbimage-is2.cfg | 149 ---------------------- board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 149 ---------------------- board/LaCie/netspace_v2/kwbimage.cfg | 149 ---------------------- board/LaCie/netspace_v2/netspace_v2.c | 120 ----------------- board/LaCie/netspace_v2/netspace_v2.h | 22 ---- configs/inetspace_v2_defconfig | 53 -------- configs/netspace_lite_v2_defconfig | 53 -------- configs/netspace_max_v2_defconfig | 53 -------- configs/netspace_mini_v2_defconfig | 48 ------- configs/netspace_v2_defconfig | 53 -------- 14 files changed, 889 deletions(-) delete mode 100644 board/LaCie/netspace_v2/Kconfig delete mode 100644 board/LaCie/netspace_v2/MAINTAINERS delete mode 100644 board/LaCie/netspace_v2/Makefile delete mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage.cfg delete mode 100644 board/LaCie/netspace_v2/netspace_v2.c delete mode 100644 board/LaCie/netspace_v2/netspace_v2.h delete mode 100644 configs/inetspace_v2_defconfig delete mode 100644 configs/netspace_lite_v2_defconfig delete mode 100644 configs/netspace_max_v2_defconfig delete mode 100644 configs/netspace_mini_v2_defconfig delete mode 100644 configs/netspace_v2_defconfigarch/arm/mach-kirkwood/Kconfig +0
-4@@ -35,9 +35,6 @@ config TARGET_KM_KIRKWOOD bool "KM Kirkwood Board" select VENDOR_KM -config TARGET_NETSPACE_V2 - bool "LaCie netspace_v2 Board" - config TARGET_IB62X0 bool "ib62x0 Board"@@ -77,7 +74,6 @@ source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" source "board/keymile/Kconfig" -source "board/LaCie/netspace_v2/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig"board/LaCie/netspace_v2/Kconfig deleted +0
-12@@ -1,12 +0,0 @@ -if TARGET_NETSPACE_V2 - -config SYS_BOARD - default "netspace_v2" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "lacie_kw" - -endifboard/LaCie/netspace_v2/MAINTAINERS deleted +0
-14@@ -1,14 +0,0 @@ -NETSPACE_V2 BOARD -M: Simon Guinot <[email protected]> -S: Maintained -F: board/LaCie/netspace_v2/ -F: include/configs/lacie_kw.h -F: configs/inetspace_v2_defconfig -F: configs/netspace_max_v2_defconfig -F: configs/netspace_v2_defconfig - -NETSPACE_LITE_V2 BOARD -#M: - -S: Maintained -F: configs/netspace_lite_v2_defconfig -F: configs/netspace_mini_v2_defconfigboard/LaCie/netspace_v2/Makefile deleted +0
-10@@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> - -obj-y := netspace_v2.o ../common/common.oboard/LaCie/netspace_v2/kwbimage-is2.cfg deleted +0
-149@@ -1,149 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000618 # DDR Configuration register -# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x35143000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x00000008 # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 10, Cs0size=512Mb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000632 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strenght reduced -# bit2: 1, DDR ODT control lsd enabled -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, enabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 1 , D2P Latency enabled -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x07, Size (i.e. 128MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 -# bit11-10:1, DQ_ODTSel. ODT select turned on - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0board/LaCie/netspace_v2/kwbimage-ns2l.cfg deleted +0
-149@@ -1,149 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000618 # DDR Configuration register -# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x34143000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x0000DDDD # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 10, Cs0size=512Mb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000632 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strenght reduced -# bit2: 1, DDR ODT control lsd enabled -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, enabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 1 , D2P Latency enabled -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x07, Size (i.e. 128MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 -# bit11-10:1, DQ_ODTSel. ODT select turned on - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0board/LaCie/netspace_v2/kwbimage.cfg deleted +0
-149@@ -1,149 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Simon Guinot <[email protected]> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <[email protected]> -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000618 # DDR Configuration register -# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x35143000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x0000000C # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000632 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strenght reduced -# bit2: 1, DDR ODT control lsd enabled -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, enabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 1 , D2P Latency enabled -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x07, Size (i.e. 128MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 -# bit11-10:1, DQ_ODTSel. ODT select turned on - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0board/LaCie/netspace_v2/netspace_v2.c deleted +0
-120@@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -* -* Based on Kirkwood support: -* (C) Copyright 2009 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Prafulla Wadaskar <[email protected]> -*/ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <init.h> -#include <net.h> -#include <asm/mach-types.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/arch/gpio.h> - -#include "netspace_v2.h" -#include "../common/common.h" - -DECLARE_GLOBAL_DATA_PTR ; - -int board_early_init_f (void ) -{ -/* Gpio configuration */ -mvebu_config_gpio (NETSPACE_V2_OE_VAL_LOW ,NETSPACE_V2_OE_VAL_HIGH , -NETSPACE_V2_OE_LOW ,NETSPACE_V2_OE_HIGH ); - -/* Multi-Purpose Pins Functionality configuration */ -static const u32 kwmpp_config[] = { - MPP0_SPI_SCn, -MPP1_SPI_MOSI , -MPP2_SPI_SCK , -MPP3_SPI_MISO , -MPP4_NF_IO6 , -MPP5_NF_IO7 , - MPP6_SYSRST_OUTn, -MPP7_GPO ,/* Fan speed (bit 1) */ -MPP8_TW_SDA , -MPP9_TW_SCK , -MPP10_UART0_TXD , -MPP11_UART0_RXD , -MPP12_GPO ,/* Red led */ -MPP14_GPIO ,/* USB fuse */ -MPP16_GPIO ,/* SATA 0 power */ -MPP17_GPIO ,/* SATA 1 power */ -MPP18_NF_IO0 , -MPP19_NF_IO1 , - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, -MPP22_GPIO ,/* Fan speed (bit 0) */ -MPP23_GPIO ,/* Fan power */ -MPP24_GPIO ,/* USB mode select */ -MPP25_GPIO ,/* Fan rotation fail */ -MPP26_GPIO ,/* USB vbus-in detection */ -MPP28_GPIO ,/* USB enable vbus-out */ -MPP29_GPIO ,/* Blue led (slow register) */ -MPP30_GPIO ,/* Blue led (command register) */ -MPP31_GPIO ,/* Board power off */ -MPP32_GPIO ,/* Button (0 = Released, 1 = Pushed) */ -MPP33_GPIO ,/* Fan speed (bit 2) */ -0 - }; -kirkwood_mpp_conf (kwmpp_config,NULL ); - -return 0 ; -} - -int board_init (void ) -{ -/* Machine number */ - gd->bd->bi_arch_number =CONFIG_MACH_TYPE ; - -/* Boot parameters address */ - gd->bd->bi_boot_params =mvebu_sdram_bar (0 ) +0x100 ; - -return 0 ; -} - -#if defined(CONFIG_MISC_INIT_R ) -int misc_init_r (void ) -{ -#if defined(CONFIG_CMD_I2C ) && defined(CONFIG_SYS_I2C_EEPROM_ADDR ) -if (!env_get ("ethaddr" )) { -uchar mac[6 ]; -if (lacie_read_mac_address (mac) ==0 ) -eth_env_set_enetaddr ("ethaddr" , mac); - } -#endif -return 0 ; -} -#endif - -#if defined(CONFIG_CMD_NET ) && defined(CONFIG_RESET_PHY_R ) -/* Configure and initialize PHY */ -void reset_phy (void ) -{ -#if defined(CONFIG_NETSPACE_LITE_V2 ) || defined(CONFIG_NETSPACE_MINI_V2 ) -mv_phy_88e1318_init ("egiga0" ,0 ); -#else -mv_phy_88e1116_init ("egiga0" ,8 ); -#endif -} -#endif - -#if defined(CONFIG_KIRKWOOD_GPIO ) -/* Return GPIO button status */ -static int -do_read_button (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]) -{ -return kw_gpio_get_value (NETSPACE_V2_GPIO_BUTTON ); -} - -U_BOOT_CMD (button,1 ,1 , do_read_button, -"Return GPIO button status 0=off 1=on" ,"" ); -#endif board/LaCie/netspace_v2/netspace_v2.h deleted +0
-22@@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Simon Guinot <[email protected]> -* -* Based on Kirkwood support: -* (C) Copyright 2009 -* Marvell Semiconductor <www.marvell.com> -* Written-by: Prafulla Wadaskar <[email protected]> -*/ - -#ifndef NETSPACE_V2_H -#define NETSPACE_V2_H - -/* GPIO configuration */ -#define NETSPACE_V2_OE_LOW 0x06004000 -#define NETSPACE_V2_OE_HIGH 0x00000031 -#define NETSPACE_V2_OE_VAL_LOW 0x10030000 -#define NETSPACE_V2_OE_VAL_HIGH 0x00000000 - -#define NETSPACE_V2_GPIO_BUTTON 32 - -#endif /* NETSPACE_V2_H */ configs/inetspace_v2_defconfig deleted +0
-53@@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" IS v2" -CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ns2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-is2" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=yconfigs/netspace_lite_v2_defconfig deleted +0
-53@@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" NS v2 Lite" -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ns2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2lite" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=yconfigs/netspace_max_v2_defconfig deleted +0
-53@@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" NS Max v2" -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ns2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2max" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=yconfigs/netspace_mini_v2_defconfig deleted +0
-48@@ -1,48 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" NS v2 Mini" -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ns2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2mini" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=yconfigs/netspace_v2_defconfig deleted +0
-53@@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x70000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_IDENT_STRING=" NS v2" -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200" -CONFIG_USE_PREBOOT=y -CONFIG_CONSOLE_MUX=y -CONFIG_MISC_INIT_R=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="ns2> " -CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=20000000 -CONFIG_ENV_ADDR=0x70000 -CONFIG_MVSATA_IDE=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=ySignature · 1 line
2.25.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200620/ac21b00e/attachment.sig>
v3 cover spi: kirkwood: dm-conversion (part4)
In reply to Jagan TekiHi Jagan,
Quoted 6 lines · Jagan Teki,
Series of kirkwood boards to switch
DM_SPIand drop which are not DM enabled still.Any inputs?
Jagan.
I had a quick glance over the series and it looks good to me.
I'm fortunate enough to be able to get into the office so I'll try and give this a spin on the kirkwood board I have on Monday.
Bhargav Shah (1):
Quoted 62 lines
spi: kirkwood: Drop nondm code
Jagan Teki (3):
arm: Removed2net_v2board
db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH
arm: Removenetspace_v2boardarch/arm/mach-kirkwood/Kconfig | 8 - board/LaCie/net2big_v2/Kconfig | 12 - board/LaCie/net2big_v2/MAINTAINERS | 7 - board/LaCie/net2big_v2/Makefile | 13 -- board/LaCie/net2big_v2/kwbimage.cfg | 149 ------------- board/LaCie/net2big_v2/net2big_v2.c | 257 ---------------------- board/LaCie/net2big_v2/net2big_v2.h | 28 --- board/LaCie/netspace_v2/Kconfig | 12 - board/LaCie/netspace_v2/MAINTAINERS | 14 -- board/LaCie/netspace_v2/Makefile | 10 - board/LaCie/netspace_v2/kwbimage-is2.cfg | 149 ------------- board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 149 ------------- board/LaCie/netspace_v2/kwbimage.cfg | 149 ------------- board/LaCie/netspace_v2/netspace_v2.c | 120 ---------- board/LaCie/netspace_v2/netspace_v2.h | 22 -- configs/d2net_v2_defconfig | 53 ----- configs/db-88f6281-bp-nand_defconfig | 4 +- configs/inetspace_v2_defconfig | 53 ----- configs/net2big_v2_defconfig | 53 ----- configs/netspace_lite_v2_defconfig | 53 ----- configs/netspace_max_v2_defconfig | 53 ----- configs/netspace_mini_v2_defconfig | 48 ---- configs/netspace_v2_defconfig | 53 ----- drivers/spi/Kconfig | 12 +- drivers/spi/kirkwood_spi.c | 136 ++---------- include/configs/lacie_kw.h | 152 ------------- scripts/config_whitelist.txt | 1 - 27 files changed, 21 insertions(+), 1749 deletions(-) delete mode 100644 board/LaCie/net2big_v2/Kconfig delete mode 100644 board/LaCie/net2big_v2/MAINTAINERS delete mode 100644 board/LaCie/net2big_v2/Makefile delete mode 100644 board/LaCie/net2big_v2/kwbimage.cfg delete mode 100644 board/LaCie/net2big_v2/net2big_v2.c delete mode 100644 board/LaCie/net2big_v2/net2big_v2.h delete mode 100644 board/LaCie/netspace_v2/Kconfig delete mode 100644 board/LaCie/netspace_v2/MAINTAINERS delete mode 100644 board/LaCie/netspace_v2/Makefile delete mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg delete mode 100644 board/LaCie/netspace_v2/kwbimage.cfg delete mode 100644 board/LaCie/netspace_v2/netspace_v2.c delete mode 100644 board/LaCie/netspace_v2/netspace_v2.h delete mode 100644 configs/d2net_v2_defconfig delete mode 100644 configs/inetspace_v2_defconfig delete mode 100644 configs/net2big_v2_defconfig delete mode 100644 configs/netspace_lite_v2_defconfig delete mode 100644 configs/netspace_max_v2_defconfig delete mode 100644 configs/netspace_mini_v2_defconfig delete mode 100644 configs/netspace_v2_defconfig delete mode 100644 include/configs/lacie_kw.h--
2.25.1
v3 cover spi: kirkwood: dm-conversion (part4)
Quoted 8 lines · Chris Packham
Hi Jagan,
Quoted 4 lines · Jagan Teki,
Series of kirkwood boards to switch
DM_SPIand drop which are not DM enabled still.
Quoted 8 lines
Quoted 2 lines
Any inputs?
Jagan.I had a quick glance over the series and it looks good to me.
I'm fortunate enough to be able to get into the office so I'll try and give this a spin on the kirkwood board I have on Monday.
Tooks a bit longer to dust off the kirkwood board than I expected. For this series