tbs2910: migrate to DM_VIDEO
PATCH 1/1 tbs2910: migrate to DM_VIDEO
Migration to DM_VIDEO driver is long overdue, configure it in board config files. To enable the display set stdout like:
setenv stdout serial,vidconsole
---
This is only build tested.
configs/tbs2910_defconfig | 7 ++++++- include/configs/tbs2910.h | 2 -- 2 files changed, 6 insertions(+), 3 deletions(-)
configs/tbs2910_defconfig +6 -1
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x60000 CONFIG_TARGET_TBS2910=y
@@ -84,7 +85,11 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_I2C_EDID=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP32 is not set +# CONFIG_VIDEO_ANSI is not set CONFIG_VIDEO_IPUV3=y -CONFIG_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_OF_LIBFDT_ASSUME_MASK=0xff # CONFIG_EFI_LOADER is not set
include/configs/tbs2910.h +0 -2
@@ -37,11 +37,9 @@#define CONFIG_MXC_UART_BASE UART1_BASE/* select UART1/UART2 */ /* Framebuffer */ -#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#endif /* PCI */ #ifdef CONFIG_CMD_PCI
Signature · 1 line
2.17.1
PATCH 1/1 tbs2910: migrate to DM_VIDEO
Quoted 4 lines · Anatolij Gustschin
Migration to
DM_VIDEOdriver is long overdue, configure it in board config files. To enable the display set stdout like:setenv stdout serial,vidconsole
And this exactly is the problem.
There are some users of this board without serial console. They have no chance to set this after upgrading u-boot.
What is the reason behind this incompatible change? In other words, why vga cannot be an alias for vidconsole, if this is the preferred name nowadays?
Regards,
Soeren
Quoted 50 lines
Signed-off-by Anatolij Gustschin <[email protected]>---
This is only build tested.configs/tbs2910_defconfig | 7 ++++++- include/configs/tbs2910.h | 2 -- 2 files changed, 6 insertions(+), 3 deletions(-)configs/tbs2910_defconfig +6
-1@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x60000 CONFIG_TARGET_TBS2910=y@@ -84,7 +85,11 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_I2C_EDID=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP32 is not set +# CONFIG_VIDEO_ANSI is not set CONFIG_VIDEO_IPUV3=y -CONFIG_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_OF_LIBFDT_ASSUME_MASK=0xff # CONFIG_EFI_LOADER is not setinclude/configs/tbs2910.h +0
-2@@ -37,11 +37,9 @@#define CONFIG_MXC_UART_BASE UART1_BASE/* select UART1/UART2 */ /* Framebuffer */ -#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#endif /* PCI */ #ifdef CONFIG_CMD_PCI
PATCH 1/1 video: extend stdout video console work-around for 'vga'
cfb_console driver use 'vga' console name and we still have board environments defining this name. Re-use existing DM_VIDEO work- around for console name to support 'vga' name in stdout environment.
--- arch/arm/mach-tegra/Kconfig | 1 - common/console.c | 7 ++++--- drivers/video/Kconfig | 16 +++++++++------- 3 files changed, 13 insertions(+), 11 deletions(-)
arch/arm/mach-tegra/Kconfig +0 -1
@@ -58,7 +58,6 @@ config TEGRA_COMMON select MISC select OF_CONTROL select SPI - select VIDCONSOLE_AS_LCD if DM_VIDEO imply CMD_DM imply CRC32_VERIFY
common/console.c +4 -3
@@ -713,7 +713,7 @@ struct stdio_dev *search_device(int flags, const char *name) dev =stdio_get_by_name (name);#ifdef CONFIG_VIDCONSOLE_AS_LCD -if (!dev && !strcmp (name,"lcd" )) +if (!dev && !strcmp (name,CONFIG_VIDCONSOLE_AS_LCD )) dev =stdio_get_by_name ("vidconsole" );#endif
@@ -897,8 +897,9 @@ done:stdio_print_current_devices ();#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ #ifdef CONFIG_VIDCONSOLE_AS_LCD -if (strstr (stdoutname,"lcd" )) -printf ("Warning: Please change 'lcd' to 'vidconsole' in stdout/stderr environment vars\n" ); +if (strstr (stdoutname,CONFIG_VIDCONSOLE_AS_LCD )) +printf ("Warning: Please change '%s' to 'vidconsole' in stdout/stderr environment vars\n" , +CONFIG_VIDCONSOLE_AS_LCD );#endif #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
drivers/video/Kconfig +9 -7
@@ -146,14 +146,16 @@ config NO_FB_CLEAR source "drivers/video/fonts/Kconfig" config VIDCONSOLE_AS_LCD - bool "Use 'vidconsole' when 'lcd' is seen in stdout" + string "Use 'vidconsole' when string defined here is seen in stdout" depends on DM_VIDEO - help - This is a work-around for boards which have 'lcd' in their stdout - environment variable, but have moved to use driver model for video. - In this case the console will no-longer work. While it is possible - to update the environment, the breakage may be confusing for users. - This option will be removed around the end of 2016. + default "lcd" if LCD || TEGRA_COMMON + default "vga" if !LCD + help + This is a work-around for boards which have 'lcd' or 'vga' in their + stdout environment variable, but have moved to use driver model for + video. In this case the console will no-longer work. While it is + possible to update the environment, the breakage may be confusing for + users. This option will be removed around the end of 2020. config VIDEO_COREBOOT bool "Enable coreboot framebuffer driver support"
Signature · 1 line
2.17.1
PATCH 1/1 video: extend stdout video console work-around for 'vga'
Quoted 5 lines · Anatolij Gustschin
cfb_consoledriver use 'vga' console name and we still have board environments defining this name. Re-use existingDM_VIDEOwork- around for console name to support 'vga' name in stdout environment.Signed-off-by Anatolij Gustschin <[email protected]>
Tested on tbs2910, works as intended.
Thanks,
Soeren
Quoted 71 lines
--- arch/arm/mach-tegra/Kconfig | 1 - common/console.c | 7 ++++--- drivers/video/Kconfig | 16 +++++++++------- 3 files changed, 13 insertions(+), 11 deletions(-)arch/arm/mach-tegra/Kconfig +0
-1@@ -58,7 +58,6 @@ config TEGRA_COMMON select MISC select OF_CONTROL select SPI - select VIDCONSOLE_AS_LCD if DM_VIDEO imply CMD_DM imply CRC32_VERIFYcommon/console.c +4
-3@@ -713,7 +713,7 @@ struct stdio_dev *search_device(int flags, const char *name) dev =stdio_get_by_name (name);#ifdef CONFIG_VIDCONSOLE_AS_LCD -if (!dev && !strcmp (name,"lcd" )) +if (!dev && !strcmp (name,CONFIG_VIDCONSOLE_AS_LCD )) dev =stdio_get_by_name ("vidconsole" );#endif @@ -897,8 +897,9 @@ done:stdio_print_current_devices ();#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ #ifdef CONFIG_VIDCONSOLE_AS_LCD -if (strstr (stdoutname,"lcd" )) -printf ("Warning: Please change 'lcd' to 'vidconsole' in stdout/stderr environment vars\n" ); +if (strstr (stdoutname,CONFIG_VIDCONSOLE_AS_LCD )) +printf ("Warning: Please change '%s' to 'vidconsole' in stdout/stderr environment vars\n" , +CONFIG_VIDCONSOLE_AS_LCD );#endif #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE drivers/video/Kconfig +9
-7@@ -146,14 +146,16 @@ config NO_FB_CLEAR source "drivers/video/fonts/Kconfig" config VIDCONSOLE_AS_LCD - bool "Use 'vidconsole' when 'lcd' is seen in stdout" + string "Use 'vidconsole' when string defined here is seen in stdout" depends on DM_VIDEO - help - This is a work-around for boards which have 'lcd' in their stdout - environment variable, but have moved to use driver model for video. - In this case the console will no-longer work. While it is possible - to update the environment, the breakage may be confusing for users. - This option will be removed around the end of 2016. + default "lcd" if LCD || TEGRA_COMMON + default "vga" if !LCD + help + This is a work-around for boards which have 'lcd' or 'vga' in their + stdout environment variable, but have moved to use driver model for + video. In this case the console will no-longer work. While it is + possible to update the environment, the breakage may be confusing for + users. This option will be removed around the end of 2020. config VIDEO_COREBOOT bool "Enable coreboot framebuffer driver support"
PATCH 1/1 video: extend stdout video console work-around for 'vga'
In reply to Anatolij GustschinQuoted 11 lines · Anatolij Gustschin
cfb_consoledriver use 'vga' console name and we still have board environments defining this name. Re-use existingDM_VIDEOwork- around for console name to support 'vga' name in stdout environment.Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/mach-tegra/Kconfig | 1 - common/console.c | 7 ++++--- drivers/video/Kconfig | 16 +++++++++------- 3 files changed, 13 insertions(+), 11 deletions(-)
PATCH 1/1 video: extend stdout video console work-around for 'vga'
In reply to Anatolij GustschinQuoted 5 lines · Anatolij Gustschin
cfb_consoledriver use 'vga' console name and we still have board environments defining this name. Re-use existingDM_VIDEOwork- around for console name to support 'vga' name in stdout environment.Signed-off-by Anatolij Gustschin <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200526/eab167b1/attachment.sig>
PATCH 1/1 video: extend stdout video console work-around for 'vga'
In reply to Anatolij GustschinQuoted 10 lines · On Sat, 23 May 2020 17:11:20 +0200 Anatolij Gustschin agust at denx.de wrote:
cfb_consoledriver use 'vga' console name and we still have board environments defining this name. Re-use existingDM_VIDEOwork- around for console name to support 'vga' name in stdout environment.Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/mach-tegra/Kconfig | 1 - common/console.c | 7 ++++--- drivers/video/Kconfig | 16 +++++++++------- 3 files changed, 13 insertions(+), 11 deletions(-)
Applied to u-boot-video/next, thanks!
--
Anatolij
PATCH 1/1 video: extend stdout video console work-around for 'vga'
Hi Anatolij
Quoted 10 lines
From: U-Boot <[email protected]> On Behalf Of Anatolij Gustschin
Sent: vendredi 19 juin 2020 15:56Quoted 4 lines · On Sat, 23 May 2020 17:11:20 +0200 Anatolij Gustschin agust at denx.de wrote:
cfb_consoledriver use 'vga' console name and we still have board environments defining this name. Re-use existingDM_VIDEOwork- around for console name to support 'vga' name in stdout environment.
Quoted 8 lines
Quoted 6 lines
Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/mach-tegra/Kconfig | 1 - common/console.c | 7 ++++--- drivers/video/Kconfig | 16 +++++++++------- 3 files changed, 13 insertions(+), 11 deletions(-)Applied to u-boot-video/next, thanks!
This patch breaks the stm32mp15 boot in console_init_r.on the next branch.
The board have with DM_VIDEO activated.
In previous version the workaround was not activated for the board: CONFIG_VIDCONSOLE_AS_LCD=n (default)
PS: the config is activated in few board but still as bolean but defined as sting in Kconfig
configs/peach-pit_defconfig:76:CONFIG_VIDCONSOLE_AS_LCD=y configs/snow_defconfig:87:CONFIG_VIDCONSOLE_AS_LCD=y configs/peach-pi_defconfig:77:CONFIG_VIDCONSOLE_AS_LCD=y configs/spring_defconfig:88:CONFIG_VIDCONSOLE_AS_LCD=y
Now it is a string, the CONFIG is always defined = value is "lcd" or "vga" or ""
And the code in console.c under this compilation flags cause the crash.
I push a patch [1] to fix up it this update:
VIDCONSOLE_AS_LCD => Boolean used in defconfig as previously VIDCONSOLE_AS_NAME => name the the string to used.... NEW
[1] "video: restore CONFIG_VIDCONSOLE_AS_LCD as Boolean"
Regards
Patrick
PATCH 1/1 tbs2910: migrate to DM_VIDEO
In reply to Soeren MochQuoted 4 lines · On Sat, 23 May 2020 09:55:48 +0200 Soeren Moch smoch at web.de wrote:
Quoted 3 lines · Anatolij Gustschin
Migration to
DM_VIDEOdriver is long overdue, configure it in board config files. To enable the display set stdout like:
Quoted 8 lines
Quoted 1 line
setenv stdout serial,vidconsole
And this exactly is the problem.
There are some users of this board without serial console. They have no chance to set this after upgrading u-boot.What is the reason behind this incompatible change? In other words, why vga cannot be an alias for vidconsole, if this is the preferred name nowadays?
DM video console driver uses more generic name for the video console. As a work-around, an alias exists for 'lcd' name. I've sent a patch to also use 'vga' as an alias.
--
Anatolij
PATCH 1/1 tbs2910: migrate to DM_VIDEO
Quoted 12 lines · Anatolij Gustschin
Quoted 9 lines · On Sat, 23 May 2020 09:55:48 +0200 Soeren Moch smoch at web.de wrote:
Quoted 4 lines · Anatolij Gustschin
Migration to
DM_VIDEOdriver is long overdue, configure it in board config files. To enable the display set stdout like:setenv stdout serial,vidconsole
And this exactly is the problem.
There are some users of this board without serial console. They have no chance to set this after upgrading u-boot.
Quoted 7 lines
Quoted 3 lines
What is the reason behind this incompatible change? In other words, why vga cannot be an alias for vidconsole, if this is the preferred name nowadays?
DM video console driver uses more generic name for the video console. As a work-around, an alias exists for 'lcd' name. I've sent a patch to also use 'vga' as an alias.
Thanks.
I will test both patches for tbs2910.
Soeren
PATCH 1/1 tbs2910: migrate to DM_VIDEO
In reply to Anatolij GustschinQuoted 8 lines · Anatolij Gustschin
Migration to
DM_VIDEOdriver is long overdue, configure it in board config files. To enable the display set stdout like:setenv stdout serial,vidconsole
Signed-off-by Anatolij Gustschin <[email protected]>---
This is only build tested.
I tested this on top of v2020.07-rc2 and your patch "video: extend stdout video console work-around for 'vga'"
Works great. However, some comments below.
Quoted 10 lines
configs/tbs2910_defconfig | 7 ++++++- include/configs/tbs2910.h | 2 -- 2 files changed, 6 insertions(+), 3 deletions(-)configs/tbs2910_defconfig +0
-0
configs/tbs2910_defconfig line 4
Quoted 4 lines
configs/tbs2910_defconfig +1
-0@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x4000
This is not necessary. The default 0x2000 also works fine.
Quoted 22 lines
configs/tbs2910_defconfig +5
-1CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x60000 CONFIG_TARGET_TBS2910=y@@ -84,7 +85,11 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_I2C_EDID=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP32 is not set +# CONFIG_VIDEO_ANSI is not set CONFIG_VIDEO_IPUV3=y -CONFIG_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_OF_LIBFDT_ASSUME_MASK=0xff # CONFIG_EFI_LOADER is not setinclude/configs/tbs2910.h +0
-0@@ -37,11 +37,9 @@#define CONFIG_MXC_UART_BASE UART1_BASE/* select UART1/UART2 */
include/configs/tbs2910.h line 45
Quoted 10 lines
include/configs/tbs2910.h +0
-2/* Framebuffer */ -#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#endif /* PCI */ #ifdef CONFIG_CMD_PCI
Since DM_VIDEO requires vidconsole as output device, please also add
---8<---
include/configs/tbs2910.h +0 -0
@@ -92,11 +92,11 @@
??????? "fan=gpio set 92\0" \
??????? "set_con_serial=setenv stdout serial; " \
??????????????????????? "setenv stderr serial\0" \
-?????? "set_con_hdmi=setenv stdout serial,vga; " \
-?????????????????????? "setenv stderr serial,vga\0" \
-?????? "stderr=serial,vga\0" \
+?????? "set_con_hdmi=setenv stdout serial,vidconsole; " \
+?????????????????????? "setenv stderr serial,vidconsole\0" \
+?????? "stderr=serial,vidconsole\0" \
??????? "stdin=serial,usbkbd\0" \
-?????? "stdout=serial,vga\0"
+?????? "stdout=serial,vidconsole\0"
?
?#define CONFIG_BOOTCOMMAND \
??????? "mmc rescan; " \
---8<---
to avoid warnings for users with default environment.(not sure if whitespace is still correct in this snippet)
With this DM_VIDEO conversion the board comes very close to the size limit. While it works with my toolchain, there might be problems with others. So maybe not a good idea to merge this as fix immediately.
Since this depends on your above mentioned patch, do you plan to merge this via u-boot-video, or should this go as usual through the imx tree?
Thank you very much for finishing this DM_VIDEO migration, Soeren
PATCH 1/1 tbs2910: migrate to DM_VIDEO
Quoted 6 lines · On Sun, 24 May 2020 17:46:22 +0200 Soeren Moch smoch at web.de wrote:
Quoted 5 lines · Anatolij Gustschin
Migration to
DM_VIDEOdriver is long overdue, configure it in board config files. To enable the display set stdout like:setenv stdout serial,vidconsole
Quoted 7 lines
Quoted 3 lines
Signed-off-by Anatolij Gustschin <[email protected]>---
This is only build tested.I tested this on top of v2020.07-rc2 and your patch "video: extend stdout video console work-around for 'vga'"
Works great. However, some comments below.
Thanks for testing!
...
Quoted 2 lines
Quoted 1 line
+CONFIG_SYS_MALLOC_F_LEN=0x4000
This is not necessary. The default
0x2000also works fine.
Dropped in v2.
...
Quoted 25 lines
Since
DM_VIDEOrequires vidconsole as output device, please also add---8<---
include/configs/tbs2910.h +4
-4@@ -92,11 +92,11 @@ ??????? "fan=gpio set 92\0" \ ??????? "set_con_serial=setenv stdout serial; " \ ??????????????????????? "setenv stderr serial\0" \ -?????? "set_con_hdmi=setenv stdout serial,vga; " \ -?????????????????????? "setenv stderr serial,vga\0" \ -?????? "stderr=serial,vga\0" \ +?????? "set_con_hdmi=setenv stdout serial,vidconsole; " \ +?????????????????????? "setenv stderr serial,vidconsole\0" \ +?????? "stderr=serial,vidconsole\0" \ ??????? "stdin=serial,usbkbd\0" \ -?????? "stdout=serial,vga\0" +?????? "stdout=serial,vidconsole\0"?
?#defineCONFIG_BOOTCOMMAND\
??????? "mmc rescan; " \
---8<---
Quoted 2 lines
to avoid warnings for users with default environment.(not sure if whitespace is still correct in this snippet)
Done in v2.
Quoted 3 lines
With this
DM_VIDEOconversion the board comes very close to the size limit. While it works with my toolchain, there might be problems with others. So maybe not a good idea to merge this as fix immediately.
Yes, with GCC 9.2 it didn't work any more. I've submitted some DM_VIDEO patches to disable more unused code to fix this.
Quoted 2 lines
Since this depends on your above mentioned patch, do you plan to merge this via u-boot-video, or should this go as usual through the imx tree?
I'll merge this via u-boot-video tree. v2 patch depends on a few more video patches which are under review/built-test currently.
--
Anatolij
PATCH 1/1 tbs2910: migrate to DM_VIDEO
Quoted 56 lines · Anatolij Gustschin
Quoted 6 lines · On Sun, 24 May 2020 17:46:22 +0200 Soeren Moch smoch at web.de wrote:
Quoted 5 lines · Anatolij Gustschin
Migration to
DM_VIDEOdriver is long overdue, configure it in board config files. To enable the display set stdout like:setenv stdout serial,vidconsole
Quoted 7 lines
Quoted 3 lines
Signed-off-by Anatolij Gustschin <[email protected]>---
This is only build tested.I tested this on top of v2020.07-rc2 and your patch "video: extend stdout video console work-around for 'vga'"
Works great. However, some comments below.
Thanks for testing!
...
Quoted 2 lines
Quoted 1 line
+CONFIG_SYS_MALLOC_F_LEN=0x4000
This is not necessary. The default
0x2000also works fine.Dropped in v2.
...
Quoted 25 lines
Since
DM_VIDEOrequires vidconsole as output device, please also add---8<---
include/configs/tbs2910.h +4
-4@@ -92,11 +92,11 @@ ??????? "fan=gpio set 92\0" \ ??????? "set_con_serial=setenv stdout serial; " \ ??????????????????????? "setenv stderr serial\0" \ -?????? "set_con_hdmi=setenv stdout serial,vga; " \ -?????????????????????? "setenv stderr serial,vga\0" \ -?????? "stderr=serial,vga\0" \ +?????? "set_con_hdmi=setenv stdout serial,vidconsole; " \ +?????????????????????? "setenv stderr serial,vidconsole\0" \ +?????? "stderr=serial,vidconsole\0" \ ??????? "stdin=serial,usbkbd\0" \ -?????? "stdout=serial,vga\0" +?????? "stdout=serial,vidconsole\0"?
?#defineCONFIG_BOOTCOMMAND\
??????? "mmc rescan; " \
---8<---Quoted 2 lines
to avoid warnings for users with default environment.(not sure if whitespace is still correct in this snippet)
Done in v2.
Quoted 3 lines
With this
DM_VIDEOconversion the board comes very close to the size limit. While it works with my toolchain, there might be problems with others. So maybe not a good idea to merge this as fix immediately.
Quoted 7 lines
Yes, with GCC 9.2 it didn't work any more. I've submitted some
DM_VIDEOpatches to disable more unused code to fix this.Quoted 2 lines
Since this depends on your above mentioned patch, do you plan to merge this via u-boot-video, or should this go as usual through the imx tree?
I'll merge this via u-boot-video tree. v2 patch depends on a few more video patches which are under review/built-test currently.
OK, I will try to test this new version again on top of your other patches.
Do you plan to merge this for v2020.07, or for -next?
Soeren
PATCH 1/1 tbs2910: migrate to DM_VIDEO
On Thu, 28 May 2020 09:54:42 +0200
Soeren Moch smoch at web.de wrote:
...
Quoted 3 lines
Quoted 2 lines
I'll merge this via u-boot-video tree. v2 patch depends on a few more video patches which are under review/built-test currently.
OK, I will try to test this new version again on top of your other patches.
OK, you could use 'dm_video-imx6' branch in my repo:
https://gitlab.denx.de/u-boot/custodians/u-boot-video/-/commits/dm_video-imx6
All required patches are already integrated there.
Quoted 1 line
Do you plan to merge this for v2020.07, or for -next?
For v2020.07 it is too late, Tom suggested to merge this for -next.
--
Anatolij
PATCH 1/1 tbs2910: migrate to DM_VIDEO
Quoted 10 lines · Anatolij Gustschin
On Thu, 28 May 2020 09:54:42 +0200
Soeren Moch smoch at web.de wrote:
...Quoted 3 lines
Quoted 2 lines
I'll merge this via u-boot-video tree. v2 patch depends on a few more video patches which are under review/built-test currently.
OK, I will try to test this new version again on top of your other patches.
OK, you could use 'dm_video-imx6' branch in my repo:
https://gitlab.denx.de/u-boot/custodians/u-boot-video/-/commits/dm_video-imx6All required patches are already integrated there.
Still works as expected.
The tbs2910-patch already has my tested-by, I could not find this series as a whole to send a tag for this.
Quoted 2 lines
Quoted 1 line
Do you plan to merge this for v2020.07, or for -next?
For v2020.07 it is too late, Tom suggested to merge this for -next.
OK, thanks,
Soeren