rtc: pcf2127: add alarm support
Subsystems (2)
v4 cover rtc: pcf2127: add alarm support
From: Liam Beguin <[email protected]>
The board used to test this series has the interrupt line of the RTC connected to a circuit controlling the power of the board. An event on the interrupt line while the board is off will power it on. Because of these hardware limitations, the irq handler added in this patch wasn't fully tested.
The alarm fuctionality was tested on a PCA2129, with:
$ date "2010-10-10 10:10" Sun Oct 10 10:10:00 UTC 2010 $ /usr/sbin/rtcwake -u -d /dev/rtc0 -s10 --mode off [ ... ] $ # power on after 10 seconds
Changes since v1:
- Document new compatible string for the pca2129
- Add calls to pcf2127_wdt_active_ping after accessing CTRL2
- Use sizeof(buf) instead of hadcoding value
- Cleanup debug trace
- Add interrupt handler and wakeup-source devicetree option
Changes since v2:
- Rebase on latest mainline tree
- Remove redundant if in pcf2127_rtc_alarm_irq_enable
- Remove duplicate watchdog ping in pcf2127_rtc_irq
- Avoid forward declaration
- Remove dev_err strings
- Remove dev_dbg traces since they are now part of the core
- Avoid unnecessary read in pcf2127_rtc_irq with regmap_write
- Add extra rtc_class_ops struct with alarm functions
Changes since v3:
- Replace "goto irq_err" with "return IRQ_NONE" in interrupt handler
- Add Reviewed-by trailers
Liam Beguin (2):
rtc: pcf2127: add pca2129 device id
rtc: pcf2127: add alarm support
.../devicetree/bindings/rtc/trivial-rtc.yaml | 2 + drivers/rtc/rtc-pcf2127.c | 137 ++++++++++++++++++ 2 files changed, 139 insertions(+)
Interdiff against v3:
drivers/rtc/rtc-pcf2127.c +2 -4
@@ -416,7 +416,7 @@ static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) ret =regmap_read (pcf2127->regmap,PCF2127_REG_CTRL2 , &ctrl2);if (ret) - goto irq_err; +return IRQ_NONE ;if (ctrl2 &PCF2127_BIT_CTRL2_AF ) { regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
@@ -427,11 +427,9 @@ static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) ret =pcf2127_wdt_active_ping (&pcf2127->wdd);if (ret) - goto irq_err; +return IRQ_NONE ;return IRQ_HANDLED ; -irq_err: -return IRQ_NONE ; }static const struct rtc_class_ops pcf2127_rtc_alrm_ops = {
base-commit: 7c30b859a947535f2213277e827d7ac7dcff9c84
Signature · 1 line
2.27.0
PATCH v4 1/2 rtc: pcf2127: add pca2129 device id
From: Liam Beguin <[email protected]>
The PCA2129 is the automotive grade version of the PCF2129. add it to the list of compatibles.
---
Changes since v1:
- Document new compatible string for the pca2129
Changes since v2:
- None
Change since v3:
- Add Reviewed-by trailer
Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 2 ++ drivers/rtc/rtc-pcf2127.c | 3 +++ 2 files changed, 5 insertions(+)
Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +2 -0
@@ -52,6 +52,8 @@ properties: - nxp,pcf2127 # Real-time clock - nxp,pcf2129 + # Real-time clock + - nxp,pca2129 # Real-time Clock Module - pericom,pt7c4338 # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
drivers/rtc/rtc-pcf2127.c +3 -0
@@ -553,6 +553,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,static const struct of_device_id pcf2127_of_match[] = { { .compatible ="nxp,pcf2127" }, { .compatible ="nxp,pcf2129" }, + { .compatible ="nxp,pca2129" }, {} };MODULE_DEVICE_TABLE (of, pcf2127_of_match);
@@ -664,6 +665,7 @@ static int pcf2127_i2c_probe(struct i2c_client *client,static const struct i2c_device_id pcf2127_i2c_id[] = { {"pcf2127" ,1 }, {"pcf2129" ,0 }, + {"pca2129" ,0 }, { } };MODULE_DEVICE_TABLE (i2c, pcf2127_i2c_id);
@@ -729,6 +731,7 @@ static int pcf2127_spi_probe(struct spi_device *spi)static const struct spi_device_id pcf2127_spi_id[] = { {"pcf2127" ,1 }, {"pcf2129" ,0 }, + {"pca2129" ,0 }, { } };MODULE_DEVICE_TABLE (spi, pcf2127_spi_id);
Signature · 1 line
2.27.0
PATCH v4 2/2 rtc: pcf2127: add alarm support
In reply to Liam BeguinFrom: Liam Beguin <[email protected]>
Add alarm support for the pcf2127 RTC chip family. Tested on pca2129.
---
Changes since v1:
- Add calls to pcf2127_wdt_active_ping after accessing CTRL2
- Cleanup calls to regmap_{read,write,update_bits}
- Cleanup debug trace
- Add interrupt handler, untested because of hardware limitations
- Add wakeup-source devicetree option
Changes since v2:
- Avoid forward declaration of pcf2127_wdt_active_ping
- Remove dev_err strings
- Remove dev_dbg traces since they are now part of the core
- Remove redundant if in pcf2127_rtc_alarm_irq_enable
- Remove duplicate watchdog ping in pcf2127_rtc_irq
- Avoid unnecessary read in pcf2127_rtc_irq with regmap_write
- Add extra rtc_class_ops struct with alarm functions
Changes since v3:
- Replace "goto irq_err" with "return IRQ_NONE" in interrupt handler
- Add Reviewed-by trailer
drivers/rtc/rtc-pcf2127.c | 134 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+)
drivers/rtc/rtc-pcf2127.c +134 -0
@@ -20,6 +20,7 @@#include <linux/slab.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/watchdog.h>
@@ -28,7 +29,9 @@#define PCF2127_BIT_CTRL1_TSF1 BIT(4)/* Control register 2 */ #define PCF2127_REG_CTRL2 0x01 +#define PCF2127_BIT_CTRL2_AIE BIT(1)#define PCF2127_BIT_CTRL2_TSIE BIT(2) +#define PCF2127_BIT_CTRL2_AF BIT(4)#define PCF2127_BIT_CTRL2_TSF2 BIT(5)/* Control register 3 */ #define PCF2127_REG_CTRL3 0x02
@@ -46,6 +49,12 @@#define PCF2127_REG_DW 0x07#define PCF2127_REG_MO 0x08#define PCF2127_REG_YR 0x09 +/* Alarm registers */ +#define PCF2127_REG_ALARM_SC 0x0A +#define PCF2127_REG_ALARM_MN 0x0B +#define PCF2127_REG_ALARM_HR 0x0C +#define PCF2127_REG_ALARM_DM 0x0D +#define PCF2127_REG_ALARM_DW 0x0E/* Watchdog registers */ #define PCF2127_REG_WD_CTL 0x10#define PCF2127_BIT_WD_CTL_TF0 BIT(0)
@@ -324,6 +333,114 @@ static const struct watchdog_ops pcf2127_watchdog_ops = { .set_timeout = pcf2127_wdt_set_timeout, }; +/* Alarm */ +static int pcf2127_rtc_read_alarm (struct device *dev,struct rtc_wkalrm *alrm) +{ +struct pcf2127 *pcf2127 =dev_get_drvdata (dev); +unsigned int buf[5 ], ctrl2; +int ret; + + ret =regmap_read (pcf2127->regmap,PCF2127_REG_CTRL2 , &ctrl2); +if (ret) +return ret; + + ret =pcf2127_wdt_active_ping (&pcf2127->wdd); +if (ret) +return ret; + + ret =regmap_bulk_read (pcf2127->regmap,PCF2127_REG_ALARM_SC , buf, +sizeof (buf)); +if (ret) +return ret; + + alrm->enabled = ctrl2 &PCF2127_BIT_CTRL2_AIE ; + alrm->pending = ctrl2 &PCF2127_BIT_CTRL2_AF ; + + alrm->time.tm_sec =bcd2bin (buf[0 ] &0x7F ); + alrm->time.tm_min =bcd2bin (buf[1 ] &0x7F ); + alrm->time.tm_hour =bcd2bin (buf[2 ] &0x3F ); + alrm->time.tm_mday =bcd2bin (buf[3 ] &0x3F ); + alrm->time.tm_wday = buf[4 ] &0x07 ; + +return 0 ; +} + +static int pcf2127_rtc_alarm_irq_enable (struct device *dev,u32 enable) +{ +struct pcf2127 *pcf2127 =dev_get_drvdata (dev); +int ret; + + ret =regmap_update_bits (pcf2127->regmap,PCF2127_REG_CTRL2 , +PCF2127_BIT_CTRL2_AIE , + enable ?PCF2127_BIT_CTRL2_AIE :0 ); +if (ret) +return ret; + +return pcf2127_wdt_active_ping (&pcf2127->wdd); +} + +static int pcf2127_rtc_set_alarm (struct device *dev,struct rtc_wkalrm *alrm) +{ +struct pcf2127 *pcf2127 =dev_get_drvdata (dev); +uint8_t buf[5 ]; +int ret; + + ret =regmap_update_bits (pcf2127->regmap,PCF2127_REG_CTRL2 , +PCF2127_BIT_CTRL2_AF ,0 ); +if (ret) +return ret; + + ret =pcf2127_wdt_active_ping (&pcf2127->wdd); +if (ret) +return ret; + + buf[0 ] =bin2bcd (alrm->time.tm_sec); + buf[1 ] =bin2bcd (alrm->time.tm_min); + buf[2 ] =bin2bcd (alrm->time.tm_hour); + buf[3 ] =bin2bcd (alrm->time.tm_mday); + buf[4 ] = (alrm->time.tm_wday &0x07 ); + + ret =regmap_bulk_write (pcf2127->regmap,PCF2127_REG_ALARM_SC , buf, +sizeof (buf)); +if (ret) +return ret; + +return pcf2127_rtc_alarm_irq_enable (dev, alrm->enabled); +} + +static irqreturn_t pcf2127_rtc_irq (int irq,void *dev) +{ +struct pcf2127 *pcf2127 =dev_get_drvdata (dev); +unsigned int ctrl2 =0 ; +int ret =0 ; + + ret =regmap_read (pcf2127->regmap,PCF2127_REG_CTRL2 , &ctrl2); +if (ret) +return IRQ_NONE ; + +if (ctrl2 &PCF2127_BIT_CTRL2_AF ) { +regmap_write (pcf2127->regmap,PCF2127_REG_CTRL2 , + ctrl2 & ~PCF2127_BIT_CTRL2_AF ); + +rtc_update_irq (pcf2127->rtc,1 ,RTC_IRQF |RTC_AF ); + } + + ret =pcf2127_wdt_active_ping (&pcf2127->wdd); +if (ret) +return IRQ_NONE ; + +return IRQ_HANDLED ; +} + +static const struct rtc_class_ops pcf2127_rtc_alrm_ops = { + .ioctl = pcf2127_rtc_ioctl, + .read_time = pcf2127_rtc_read_time, + .set_time = pcf2127_rtc_set_time, + .read_alarm = pcf2127_rtc_read_alarm, + .set_alarm = pcf2127_rtc_set_alarm, + .alarm_irq_enable = pcf2127_rtc_alarm_irq_enable, +}; +/* sysfs interface */ static ssize_t timestamp0_store(struct device *dev,
@@ -419,6 +536,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, const char *name, bool has_nvmem) {struct pcf2127 *pcf2127; +int alarm_irq =0 ;u32 wdd_timeout;int ret =0 ;
@@ -441,6 +559,22 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, pcf2127->rtc->range_max =RTC_TIMESTAMP_END_2099 ; pcf2127->rtc->set_start_time = true;/* Sets actual start to 1970 */ + alarm_irq =of_irq_get_byname (dev->of_node,"alarm" ); +if (alarm_irq >=0 ) { + ret =devm_request_irq (dev, alarm_irq, pcf2127_rtc_irq, +IRQF_TRIGGER_LOW |IRQF_ONESHOT , +dev_name (dev), dev); +if (ret) { +dev_err (dev,"failed to request alarm irq\n" ); +return ret; + } + } + +if (alarm_irq >=0 ||device_property_read_bool (dev,"wakeup-source" )) { +device_init_wakeup (dev, true); + pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops; + } + pcf2127->wdd.parent = dev; pcf2127->wdd.info = &pcf2127_wdt_info; pcf2127->wdd.ops = &pcf2127_watchdog_ops;
Signature · 1 line
2.27.0
Quoted 33 lines · Liam Beguin
From: Liam Beguin <[email protected]>
The board used to test this series has the interrupt line of the RTC connected to a circuit controlling the power of the board. An event on the interrupt line while the board is off will power it on. Because of these hardware limitations, the irq handler added in this patch wasn't fully tested.
The alarm fuctionality was tested on a PCA2129, with:
$ date "2010-10-10 10:10" Sun Oct 10 10:10:00 UTC 2010 $ /usr/sbin/rtcwake -u -d /dev/rtc0 -s10 --mode off [ ... ] $ # power on after 10 secondsChanges since v1:
- Document new compatible string for the pca2129
- Add calls topcf2127_wdt_active_pingafter accessing CTRL2
- Use sizeof(buf) instead of hadcoding value
- Cleanup debug trace
- Add interrupt handler and wakeup-source devicetree optionChanges since v2:
- Rebase on latest mainline tree
- Remove redundant if inpcf2127_rtc_alarm_irq_enable
- Remove duplicate watchdog ping inpcf2127_rtc_irq
- Avoid forward declaration
- Removedev_errstrings
- Removedev_dbgtraces since they are now part of the core
- Avoid unnecessary read inpcf2127_rtc_irqwithregmap_write
- Add extrartc_class_opsstruct with alarm functions
Quoted 8 lines
Changes since v3:
- Replace "gotoirq_err" with "returnIRQ_NONE" in interrupt handler
- Add Reviewed-by trailersLiam Beguin (2):
rtc: pcf2127: add pca2129 device id
rtc: pcf2127: add alarm support
Hi Alexandre,
Did you get a change to take a look at this revision? Thanks,
Liam
Quoted 36 lines
.../devicetree/bindings/rtc/trivial-rtc.yaml | 2 + drivers/rtc/rtc-pcf2127.c | 137 ++++++++++++++++++ 2 files changed, 139 insertions(+)Interdiff against v3:
drivers/rtc/rtc-pcf2127.c +2
-4@@ -416,7 +416,7 @@ static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) ret =regmap_read (pcf2127->regmap,PCF2127_REG_CTRL2 , &ctrl2);if (ret) - goto irq_err; +return IRQ_NONE ;if (ctrl2 &PCF2127_BIT_CTRL2_AF ) { regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,@@ -427,11 +427,9 @@ static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) ret =pcf2127_wdt_active_ping (&pcf2127->wdd);if (ret) - goto irq_err; +return IRQ_NONE ;return IRQ_HANDLED ; -irq_err: -return IRQ_NONE ; }static const struct rtc_class_ops pcf2127_rtc_alrm_ops = {base-commit:
7c30b859a947535f2213277e827d7ac7dcff9c84Signature · 1 line
2.27.0
Quoted 9 lines · Liam Beguin
The board used to test this series has the interrupt line of the RTC connected to a circuit controlling the power of the board. An event on the interrupt line while the board is off will power it on. Because of these hardware limitations, the irq handler added in this patch wasn't fully tested.
The alarm fuctionality was tested on a PCA2129, with:
[...]
Applied, thanks!
[1/2] rtc: pcf2127: add pca2129 device id
commit: 985b30dbe2cf58c27dd81da85410439ced8ce6d7
[2/2] rtc: pcf2127: add alarm support
commit: 8a914bac44be33623cfcf27688b18b6f81a5c7d5Best regards,
Signature · 1 line
Alexandre Belloni <[email protected]>