Watchdog: introduce ARM SBSA watchdog driver
Subsystems (2)
PATCH v5 1/3 Watchdog: introduce ARM SBSA watchdog driver
From: Zhao Qiang <[email protected]>
According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset.
More details about the hardware specification of this device:
ARM DEN0029B - Server Base System Architecture (SBSA)
This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored.
---
Change in v5:
- add header file linux/err.h
Change in v4:
- remove unused variable load_value
Change in v3:
- add description
- remove empty line
Change in v2:
- fix copyright
MAINTAINERS | 1 + drivers/watchdog/Kconfig | 9 +++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 131 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 142 insertions(+) create mode 100644 drivers/watchdog/sbsa_gwdt.c
MAINTAINERS +1 -0
@@ -689,6 +689,7 @@ M: Priyanka Jain <[email protected]> S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git F: drivers/watchdog/sp805_wdt.c +F: drivers/watchdog/sbsa_gwdt.c I2C M: Heiko Schocher <[email protected]>
drivers/watchdog/Kconfig +9 -0
@@ -163,6 +163,15 @@ config WDT_SANDBOX can be probed and supports all of the methods of WDT, but does not really do anything. +config WDT_SBSA + bool "SBSA watchdog timer support" + depends on WDT + help + Select this to enable SBSA watchdog timer. + This driver can operate ARM SBSA Generic Watchdog as a single stage. + In the single stage mode, when the timeout is reached, your system + will be reset by WS1. The first signal (WS0) is ignored. + config WDT_SP805 bool "SP805 watchdog timer support" depends on WDT
drivers/watchdog/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o obj-$(CONFIG_WDT_MTK) += mtk_wdt.o obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o +obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o obj-$(CONFIG_WDT_SP805) += sp805_wdt.o obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
drivers/watchdog/sbsa_gwdt.c new file +131 -0
131 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v5 2/3 arm64: lx2160a: dts: Add watchdog node
From: Zhao Qiang <[email protected]>
Add watchdog node which is sbsa into lx2160a dtsi
---
Change in v5:
- none
Change in v4:
- none
Change in v3:
- none
Change in v2:
- none
arch/arm/dts/fsl-lx2160a.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/dts/fsl-lx2160a.dtsi +7 -0
@@ -204,6 +204,13 @@ #interrupt-cells = <2>; }; + watchdog at 23a0000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x0 0x23a0000 0 0x1000>, + <0x0 0x2390000 0 0x1000>; + timeout-sec = <30>; + }; + usb0: usb3 at 3100000 { compatible = "fsl,layerscape-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>;
Signature · 1 line
2.7.4
PATCH v5 3/3 configs: lx2160a: Enable Watchdog support
In reply to Biwen LiFrom: Zhao Qiang <[email protected]>
Enable support to compile SBSA driver.
---
Change in v5:
- none
Change in v4:
- none
Change in v3:
- none
Change in v2:
- none
configs/lx2160aqds_tfa_defconfig | 3 +++ configs/lx2160ardb_tfa_defconfig | 3 +++ 2 files changed, 6 insertions(+)
configs/lx2160aqds_tfa_defconfig +3 -0
@@ -30,6 +30,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y +CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y
@@ -82,4 +83,6 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_WDT=y +CONFIG_WDT_SBSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
configs/lx2160ardb_tfa_defconfig +3 -0
@@ -31,6 +31,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y +CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y
@@ -76,4 +77,6 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_WDT=y +CONFIG_WDT_SBSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Signature · 1 line
2.7.4