Skip to contentSkip to conversation

Watchdog: introduce ARM SBSA watchdog driver

PATCH New Biwen Li 1 participant 3 messages Jul 10, 2020

Subsystems (2)
lore
Share & tools
lore

Biwen Li

author
#0 lore raw

PATCH v5 1/3 Watchdog: introduce ARM SBSA watchdog driver

From: Zhao Qiang <[email protected]>

According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset.
More details about the hardware specification of this device:
ARM DEN0029B - Server Base System Architecture (SBSA)

This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored.

---
Change in v5:
- add header file linux/err.h

Change in v4:
- remove unused variable load_value

Change in v3:
- add description
- remove empty line

Change in v2:
- fix copyright

 MAINTAINERS                  |   1 +
 drivers/watchdog/Kconfig     |   9 +++
 drivers/watchdog/Makefile    |   1 +
 drivers/watchdog/sbsa_gwdt.c | 131 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 142 insertions(+)
 create mode 100644 drivers/watchdog/sbsa_gwdt.c
MAINTAINERS +1 -0
index 2a281a9..92bbf1c 100644
@@ -689,6 +689,7 @@ M:	Priyanka Jain <[email protected]>
 S:	Maintained
 T:	git https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git
 F:	drivers/watchdog/sp805_wdt.c
+F:	drivers/watchdog/sbsa_gwdt.c
 
 I2C
 M:	Heiko Schocher <[email protected]>
drivers/watchdog/Kconfig +9 -0
index bf06180..6d5c4fc 100644
@@ -163,6 +163,15 @@ config WDT_SANDBOX
 	  can be probed and supports all of the methods of WDT, but does not
 	  really do anything.
 
+config WDT_SBSA
+	bool "SBSA watchdog timer support"
+	depends on WDT
+	help
+	   Select this to enable SBSA watchdog timer.
+	   This driver can operate ARM SBSA Generic Watchdog as a single stage.
+	   In the single stage mode, when the timeout is reached, your system
+	   will be reset by WS1. The first signal (WS0) is ignored.
+
 config WDT_SP805
 	bool "SP805 watchdog timer support"
 	depends on WDT
drivers/watchdog/Makefile +1 -0
index 519bbd3..0f0b2eb 100644
@@ -27,6 +27,7 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
 obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
 obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
 obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
+obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o
 obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
 obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
 obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
drivers/watchdog/sbsa_gwdt.c new file +131 -0

131 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v5 2/3 arm64: lx2160a: dts: Add watchdog node

From: Zhao Qiang <[email protected]>

Add watchdog node which is sbsa into lx2160a dtsi

---
Change in v5:
- none

Change in v4:
- none

Change in v3:
- none

Change in v2:
- none

 arch/arm/dts/fsl-lx2160a.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/dts/fsl-lx2160a.dtsi +7 -0
index 1789da8..a2421f6 100644
@@ -204,6 +204,13 @@
 		#interrupt-cells = <2>;
 	};
 
+	watchdog at 23a0000 {
+		compatible = "arm,sbsa-gwdt";
+		reg = <0x0 0x23a0000 0 0x1000>,
+		      <0x0 0x2390000 0 0x1000>;
+		timeout-sec = <30>;
+	};
+
 	usb0: usb3 at 3100000 {
 		compatible = "fsl,layerscape-dwc3";
 		reg = <0x0 0x3100000 0x0 0x10000>;
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v5 3/3 configs: lx2160a: Enable Watchdog support

In reply to Biwen Li

From: Zhao Qiang <[email protected]>

Enable support to compile SBSA driver.

---
Change in v5:
- none

Change in v4:
- none

Change in v3:
- none

Change in v2:
- none

 configs/lx2160aqds_tfa_defconfig | 3 +++
 configs/lx2160ardb_tfa_defconfig | 3 +++
 2 files changed, 6 insertions(+)
configs/lx2160aqds_tfa_defconfig +3 -0
index 712957d..9626700 100644
@@ -30,6 +30,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_WDT=y
 CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
@@ -82,4 +83,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_WDT=y
+CONFIG_WDT_SBSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
configs/lx2160ardb_tfa_defconfig +3 -0
index a5c78d2..8cbe034 100644
@@ -31,6 +31,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_WDT=y
 CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
@@ -76,4 +77,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_WDT=y
+CONFIG_WDT_SBSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Signature · 1 line
2.7.4