Skip to contentSkip to conversation

Add RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs

PATCH Applied Cristian Ciocaltea 4 participants 19 messages Jul 3, 2020 – Jul 21, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v3 cover Add RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs

This patch series is a stripped-down revision of the initial series "[PATCH 00/11] Add CMU/RMU/DMA support for Actions Semi S500 SoCs":
https://lore.kernel.org/lkml/[email protected]/

At Stephen's request, I detached all DTS related work to keep the focus exclusively on the Actions S500 SoC clock driver changes:

- Add support for some missing clocks: APB, DMAC, GPIO
- Add support for Reset Management Unit

The removed patches are subject to resubmission via a separate series:

- arm: dts: owl-s500: Add Clock Management Unit
- arm: dts: owl-s500: Set UART clock refs from CMU
- arm: dts: owl-s500-roseapplepi: Use UART clock from CMU
- arm: dts: owl-s500: Add DMA controller
- arm: dts: owl-s500: Add Reset Controller support

Regards,
Cristi

Changes in v3:
- Incorporated feedback from Stephen and Mani
- Rebased on v5.8-rc3

Changes in v2:
- Incorporated Stephen's review comments
- Removed DTS related patches
- Rebased remaining patches on v5.8-rc2
- Updated cover letter, both subject and content, to reflect the new scope

Cristian Ciocaltea (6):
clk: actions: Fix h_clk for Actions S500 SoC
dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
dt-bindings: reset: Add binding constants for Actions S500 RMU
clk: actions: Add Actions S500 SoC Reset Management Unit support
MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs

 MAINTAINERS                                   |  1 +
 drivers/clk/actions/owl-s500.c                | 89 ++++++++++++++++++-
 include/dt-bindings/clock/actions,s500-cmu.h  |  7 +-
 .../dt-bindings/reset/actions,s500-reset.h    | 67 ++++++++++++++
 4 files changed, 162 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
Signature · 1 line
2.27.0
#1 lore raw

PATCH v3 1/6 clk: actions: Fix h_clk for Actions S500 SoC

The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one.

Fixes ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")

---
Changes in v3:
- Added Fixes tag
- Added Mani's Reviewed-by tag

Changes in v2:
- None

 drivers/clk/actions/owl-s500.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/actions/owl-s500.c +1 -1
index e2007ac4d235..0eb83a0b70bc 100644
@@ -183,7 +183,7 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
 static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
-static OWL_DIVIDER(h_clk, "h_clk", "ahbprevdiv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
Signature · 1 line
2.27.0
#3 lore raw

PATCH v3 2/6 dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC

In reply to Cristian Ciocaltea

Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.

---
Changes in v3:
- Preserved the original values of the existing bindings and moved the newly added constants bellow, as indicated by Stephen

Changes in v2:
- None

 include/dt-bindings/clock/actions,s500-cmu.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
include/dt-bindings/clock/actions,s500-cmu.h +6 -1
index 030981cd2d56..a250a52a6192 100644
@@ -72,7 +72,12 @@
 #define CLK_NAND		52
 #define CLK_ECC			53
 #define CLK_RMII_REF		54
+#define CLK_GPIO		55
 
-#define CLK_NR_CLKS	       (CLK_RMII_REF + 1)
+/* system clock (part 2) */
+#define CLK_APB			56
+#define CLK_DMAC		57
+
+#define CLK_NR_CLKS		(CLK_DMAC + 1)
 
 #endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */
Signature · 1 line
2.27.0
Reviewed-by on v3 2/6
#4 lore raw

Re: [PATCH v3 2/6] dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC

Quoted 4 lines · Cristian Ciocaltea

Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.

Thanks,
Mani

Quoted 32 lines

---
Changes in v3:
- Preserved the original values of the existing bindings and moved the newly added constants bellow, as indicated by Stephen

Changes in v2:
- None

 include/dt-bindings/clock/actions,s500-cmu.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
include/dt-bindings/clock/actions,s500-cmu.h +6 -1
index 030981cd2d56..a250a52a6192 100644
@@ -72,7 +72,12 @@
 #define CLK_NAND		52
 #define CLK_ECC			53
 #define CLK_RMII_REF		54
+#define CLK_GPIO		55
 
-#define CLK_NR_CLKS	       (CLK_RMII_REF + 1)
+/* system clock (part 2) */
+#define CLK_APB			56
+#define CLK_DMAC		57
+
+#define CLK_NR_CLKS		(CLK_DMAC + 1)
 
 #endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */
Signature · 1 line
2.27.0
maintainer Acked-by on v3 2/6
#5 lore raw

Re: [PATCH v3 2/6] dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC

In reply to Cristian Ciocaltea
Quoted 9 lines · Cristian Ciocaltea

Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.

---
Changes in v3:
- Preserved the original values of the existing bindings and moved the newly added constants bellow, as indicated by Stephen

Quoted 6 lines

Changes in v2:
- None

 include/dt-bindings/clock/actions,s500-cmu.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
#7 lore raw

PATCH v3 3/6 clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC

In reply to Cristian Ciocaltea

Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver.

---
Changes in v3:
- None

Changes in v2:
- None

 drivers/clk/actions/owl-s500.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/clk/actions/owl-s500.c +9 -0
index 0eb83a0b70bc..025a8f6d6482 100644
@@ -175,6 +175,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT
 static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
 
 /* gate clocks */
+static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
+static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0);
 static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED);
 static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED);
 static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED);
@@ -184,6 +186,7 @@ static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
 static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
@@ -428,6 +431,9 @@ static struct owl_clk_common *s500_clks[] = {
 	&spdif_clk.common,
 	&nand_clk.common,
 	&ecc_clk.common,
+	&apb_clk.common,
+	&dmac_clk.common,
+	&gpio_clk.common,
 };
 
 static struct clk_hw_onecell_data s500_hw_clks = {
@@ -484,6 +490,9 @@ static struct clk_hw_onecell_data s500_hw_clks = {
 		[CLK_SPDIF]		= &spdif_clk.common.hw,
 		[CLK_NAND]		= &nand_clk.common.hw,
 		[CLK_ECC]		= &ecc_clk.common.hw,
+		[CLK_APB]		= &apb_clk.common.hw,
+		[CLK_DMAC]		= &dmac_clk.common.hw,
+		[CLK_GPIO]		= &gpio_clk.common.hw,
 	},
 	.num = CLK_NR_CLKS,
 };
Signature · 1 line
2.27.0
Reviewed-by on v3 3/6
#8 lore raw

Re: [PATCH v3 3/6] clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC

Quoted 4 lines · Cristian Ciocaltea

Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver.

Thanks,
Mani

Quoted 54 lines

---
Changes in v3:
- None

Changes in v2:
- None

 drivers/clk/actions/owl-s500.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/clk/actions/owl-s500.c +9 -0
index 0eb83a0b70bc..025a8f6d6482 100644
@@ -175,6 +175,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT
 static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
 
 /* gate clocks */
+static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
+static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0);
 static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED);
 static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED);
 static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED);
@@ -184,6 +186,7 @@ static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
 static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
@@ -428,6 +431,9 @@ static struct owl_clk_common *s500_clks[] = {
 	&spdif_clk.common,
 	&nand_clk.common,
 	&ecc_clk.common,
+	&apb_clk.common,
+	&dmac_clk.common,
+	&gpio_clk.common,
 };
 
 static struct clk_hw_onecell_data s500_hw_clks = {
@@ -484,6 +490,9 @@ static struct clk_hw_onecell_data s500_hw_clks = {
 		[CLK_SPDIF]		= &spdif_clk.common.hw,
 		[CLK_NAND]		= &nand_clk.common.hw,
 		[CLK_ECC]		= &ecc_clk.common.hw,
+		[CLK_APB]		= &apb_clk.common.hw,
+		[CLK_DMAC]		= &dmac_clk.common.hw,
+		[CLK_GPIO]		= &gpio_clk.common.hw,
 	},
 	.num = CLK_NR_CLKS,
 };
Signature · 1 line
2.27.0
#10 lore raw

PATCH v3 4/6 dt-bindings: reset: Add binding constants for Actions S500 RMU

In reply to Cristian Ciocaltea

Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).

---
Changes in v3:
- Added Philipp's Acked-by tag

Changes in v2:
- None

 .../dt-bindings/reset/actions,s500-reset.h    | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
include/dt-bindings/reset/actions,s500-reset.h new file +67 -0
new file mode 100644
index 000000000000..f5d94176d10b
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Device Tree binding constants for Actions Semi S500 Reset Management Unit
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Copyright (c) 2020 Cristian Ciocaltea <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H
+#define __DT_BINDINGS_ACTIONS_S500_RESET_H
+
+#define RESET_DMAC				0
+#define RESET_NORIF				1
+#define RESET_DDR				2
+#define RESET_NANDC				3
+#define RESET_SD0				4
+#define RESET_SD1				5
+#define RESET_PCM1				6
+#define RESET_DE				7
+#define RESET_LCD				8
+#define RESET_SD2				9
+#define RESET_DSI				10
+#define RESET_CSI				11
+#define RESET_BISP				12
+#define RESET_KEY				13
+#define RESET_GPIO				14
+#define RESET_AUDIO				15
+#define RESET_PCM0				16
+#define RESET_VDE				17
+#define RESET_VCE				18
+#define RESET_GPU3D				19
+#define RESET_NIC301				20
+#define RESET_LENS				21
+#define RESET_PERIPHRESET			22
+#define RESET_USB2_0				23
+#define RESET_TVOUT				24
+#define RESET_HDMI				25
+#define RESET_HDCP2TX				26
+#define RESET_UART6				27
+#define RESET_UART0				28
+#define RESET_UART1				29
+#define RESET_UART2				30
+#define RESET_SPI0				31
+#define RESET_SPI1				32
+#define RESET_SPI2				33
+#define RESET_SPI3				34
+#define RESET_I2C0				35
+#define RESET_I2C1				36
+#define RESET_USB3				37
+#define RESET_UART3				38
+#define RESET_UART4				39
+#define RESET_UART5				40
+#define RESET_I2C2				41
+#define RESET_I2C3				42
+#define RESET_ETHERNET				43
+#define RESET_CHIPID				44
+#define RESET_USB2_1				45
+#define RESET_WD0RESET				46
+#define RESET_WD1RESET				47
+#define RESET_WD2RESET				48
+#define RESET_WD3RESET				49
+#define RESET_DBG0RESET				50
+#define RESET_DBG1RESET				51
+#define RESET_DBG2RESET				52
+#define RESET_DBG3RESET				53
+
+#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */
Signature · 1 line
2.27.0
Reviewed-by on v3 4/6
#11 lore raw

Re: [PATCH v3 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU

Quoted 5 lines · Cristian Ciocaltea

Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).

Thanks,
Mani

Quoted 87 lines

---
Changes in v3:
- Added Philipp's Acked-by tag

Changes in v2:
- None

 .../dt-bindings/reset/actions,s500-reset.h    | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
include/dt-bindings/reset/actions,s500-reset.h new file +67 -0
new file mode 100644
index 000000000000..f5d94176d10b
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Device Tree binding constants for Actions Semi S500 Reset Management Unit
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Copyright (c) 2020 Cristian Ciocaltea <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H
+#define __DT_BINDINGS_ACTIONS_S500_RESET_H
+
+#define RESET_DMAC				0
+#define RESET_NORIF				1
+#define RESET_DDR				2
+#define RESET_NANDC				3
+#define RESET_SD0				4
+#define RESET_SD1				5
+#define RESET_PCM1				6
+#define RESET_DE				7
+#define RESET_LCD				8
+#define RESET_SD2				9
+#define RESET_DSI				10
+#define RESET_CSI				11
+#define RESET_BISP				12
+#define RESET_KEY				13
+#define RESET_GPIO				14
+#define RESET_AUDIO				15
+#define RESET_PCM0				16
+#define RESET_VDE				17
+#define RESET_VCE				18
+#define RESET_GPU3D				19
+#define RESET_NIC301				20
+#define RESET_LENS				21
+#define RESET_PERIPHRESET			22
+#define RESET_USB2_0				23
+#define RESET_TVOUT				24
+#define RESET_HDMI				25
+#define RESET_HDCP2TX				26
+#define RESET_UART6				27
+#define RESET_UART0				28
+#define RESET_UART1				29
+#define RESET_UART2				30
+#define RESET_SPI0				31
+#define RESET_SPI1				32
+#define RESET_SPI2				33
+#define RESET_SPI3				34
+#define RESET_I2C0				35
+#define RESET_I2C1				36
+#define RESET_USB3				37
+#define RESET_UART3				38
+#define RESET_UART4				39
+#define RESET_UART5				40
+#define RESET_I2C2				41
+#define RESET_I2C3				42
+#define RESET_ETHERNET				43
+#define RESET_CHIPID				44
+#define RESET_USB2_1				45
+#define RESET_WD0RESET				46
+#define RESET_WD1RESET				47
+#define RESET_WD2RESET				48
+#define RESET_WD3RESET				49
+#define RESET_DBG0RESET				50
+#define RESET_DBG1RESET				51
+#define RESET_DBG2RESET				52
+#define RESET_DBG3RESET				53
+
+#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */
Signature · 1 line
2.27.0
maintainer Acked-by on v3 4/6
#12 lore raw

Re: [PATCH v3 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU

In reply to Cristian Ciocaltea
Quoted 9 lines · Cristian Ciocaltea

Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).

---
Changes in v3:
- Added Philipp's Acked-by tag

Quoted 7 lines

Changes in v2:
- None

 .../dt-bindings/reset/actions,s500-reset.h    | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
#14 lore raw

PATCH v3 5/6 clk: actions: Add Actions S500 SoC Reset Management Unit support

In reply to Cristian Ciocaltea

Add Reset Management Unit (RMU) support for Actions Semi S500 SoC.

---
Changes in v3:
- Added Mani's Reviewed-by tag

Changes in v2:
- Removed copyright as indicated by Stephen

 drivers/clk/actions/owl-s500.c | 78 ++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)
drivers/clk/actions/owl-s500.c +78 -0
index 025a8f6d6482..61bb224f6330 100644
@@ -23,8 +23,10 @@
 #include "owl-gate.h"
 #include "owl-mux.h"
 #include "owl-pll.h"
+#include "owl-reset.h"
 
 #include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
 
 #define CMU_COREPLL			(0x0000)
 #define CMU_DEVPLL			(0x0004)
@@ -497,20 +499,96 @@ static struct clk_hw_onecell_data s500_hw_clks = {
 	.num = CLK_NR_CLKS,
 };
 
+static const struct owl_reset_map s500_resets[] = {
+	[RESET_DMAC]	= { CMU_DEVRST0, BIT(0) },
+	[RESET_NORIF]	= { CMU_DEVRST0, BIT(1) },
+	[RESET_DDR]	= { CMU_DEVRST0, BIT(2) },
+	[RESET_NANDC]	= { CMU_DEVRST0, BIT(3) },
+	[RESET_SD0]	= { CMU_DEVRST0, BIT(4) },
+	[RESET_SD1]	= { CMU_DEVRST0, BIT(5) },
+	[RESET_PCM1]	= { CMU_DEVRST0, BIT(6) },
+	[RESET_DE]	= { CMU_DEVRST0, BIT(7) },
+	[RESET_LCD]	= { CMU_DEVRST0, BIT(8) },
+	[RESET_SD2]	= { CMU_DEVRST0, BIT(9) },
+	[RESET_DSI]	= { CMU_DEVRST0, BIT(10) },
+	[RESET_CSI]	= { CMU_DEVRST0, BIT(11) },
+	[RESET_BISP]	= { CMU_DEVRST0, BIT(12) },
+	[RESET_KEY]	= { CMU_DEVRST0, BIT(14) },
+	[RESET_GPIO]	= { CMU_DEVRST0, BIT(15) },
+	[RESET_AUDIO]	= { CMU_DEVRST0, BIT(17) },
+	[RESET_PCM0]	= { CMU_DEVRST0, BIT(18) },
+	[RESET_VDE]	= { CMU_DEVRST0, BIT(19) },
+	[RESET_VCE]	= { CMU_DEVRST0, BIT(20) },
+	[RESET_GPU3D]	= { CMU_DEVRST0, BIT(22) },
+	[RESET_NIC301]	= { CMU_DEVRST0, BIT(23) },
+	[RESET_LENS]	= { CMU_DEVRST0, BIT(26) },
+	[RESET_PERIPHRESET] = { CMU_DEVRST0, BIT(27) },
+	[RESET_USB2_0]	= { CMU_DEVRST1, BIT(0) },
+	[RESET_TVOUT]	= { CMU_DEVRST1, BIT(1) },
+	[RESET_HDMI]	= { CMU_DEVRST1, BIT(2) },
+	[RESET_HDCP2TX]	= { CMU_DEVRST1, BIT(3) },
+	[RESET_UART6]	= { CMU_DEVRST1, BIT(4) },
+	[RESET_UART0]	= { CMU_DEVRST1, BIT(5) },
+	[RESET_UART1]	= { CMU_DEVRST1, BIT(6) },
+	[RESET_UART2]	= { CMU_DEVRST1, BIT(7) },
+	[RESET_SPI0]	= { CMU_DEVRST1, BIT(8) },
+	[RESET_SPI1]	= { CMU_DEVRST1, BIT(9) },
+	[RESET_SPI2]	= { CMU_DEVRST1, BIT(10) },
+	[RESET_SPI3]	= { CMU_DEVRST1, BIT(11) },
+	[RESET_I2C0]	= { CMU_DEVRST1, BIT(12) },
+	[RESET_I2C1]	= { CMU_DEVRST1, BIT(13) },
+	[RESET_USB3]	= { CMU_DEVRST1, BIT(14) },
+	[RESET_UART3]	= { CMU_DEVRST1, BIT(15) },
+	[RESET_UART4]	= { CMU_DEVRST1, BIT(16) },
+	[RESET_UART5]	= { CMU_DEVRST1, BIT(17) },
+	[RESET_I2C2]	= { CMU_DEVRST1, BIT(18) },
+	[RESET_I2C3]	= { CMU_DEVRST1, BIT(19) },
+	[RESET_ETHERNET] = { CMU_DEVRST1, BIT(20) },
+	[RESET_CHIPID]	= { CMU_DEVRST1, BIT(21) },
+	[RESET_USB2_1]	= { CMU_DEVRST1, BIT(22) },
+	[RESET_WD0RESET] = { CMU_DEVRST1, BIT(24) },
+	[RESET_WD1RESET] = { CMU_DEVRST1, BIT(25) },
+	[RESET_WD2RESET] = { CMU_DEVRST1, BIT(26) },
+	[RESET_WD3RESET] = { CMU_DEVRST1, BIT(27) },
+	[RESET_DBG0RESET] = { CMU_DEVRST1, BIT(28) },
+	[RESET_DBG1RESET] = { CMU_DEVRST1, BIT(29) },
+	[RESET_DBG2RESET] = { CMU_DEVRST1, BIT(30) },
+	[RESET_DBG3RESET] = { CMU_DEVRST1, BIT(31) },
+};
+
 static struct owl_clk_desc s500_clk_desc = {
 	.clks	    = s500_clks,
 	.num_clks   = ARRAY_SIZE(s500_clks),
 
 	.hw_clks    = &s500_hw_clks,
+
+	.resets     = s500_resets,
+	.num_resets = ARRAY_SIZE(s500_resets),
 };
 
 static int s500_clk_probe(struct platform_device *pdev)
 {
 	struct owl_clk_desc *desc;
+	struct owl_reset *reset;
+	int ret;
 
 	desc = &s500_clk_desc;
 	owl_clk_regmap_init(pdev, desc);
 
+	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->rcdev.of_node = pdev->dev.of_node;
+	reset->rcdev.ops = &owl_reset_ops;
+	reset->rcdev.nr_resets = desc->num_resets;
+	reset->reset_map = desc->resets;
+	reset->regmap = desc->regmap;
+
+	ret = devm_reset_controller_register(&pdev->dev, &reset->rcdev);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register reset controller\n");
+
 	return owl_clk_probe(&pdev->dev, desc->hw_clks);
 }
 
Signature · 1 line
2.27.0
#16 lore raw

PATCH v3 6/6 MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs

In reply to Cristian Ciocaltea

Add a reset binding entry to match all members of Actions Semi Owl SoCs.

---
Changes in v3:
- Removed the "-reset.h" suffix from the binding entry, as suggested by Mani

Changes in v2:
- None

 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index 496fd4eafb68..5033de342f31 100644
@@ -1533,6 +1533,7 @@ F:	drivers/mmc/host/owl-mmc.c
 F:	drivers/pinctrl/actions/*
 F:	drivers/soc/actions/
 F:	include/dt-bindings/power/owl-*
+F:	include/dt-bindings/reset/actions,*
 F:	include/linux/soc/actions/
 N:	owl
 
Signature · 1 line
2.27.0
Reviewed-by on v3 6/6
#17 lore raw

Re: [PATCH v3 6/6] MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs

Quoted 3 lines · Cristian Ciocaltea

Add a reset binding entry to match all members of Actions Semi Owl SoCs.

Thanks,
Mani

Quoted 26 lines

---
Changes in v3:
- Removed the "-reset.h" suffix from the binding entry, as suggested by Mani

Changes in v2:
- None

 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index 496fd4eafb68..5033de342f31 100644
@@ -1533,6 +1533,7 @@ F:	drivers/mmc/host/owl-mmc.c
 F:	drivers/pinctrl/actions/*
 F:	drivers/soc/actions/
 F:	include/dt-bindings/power/owl-*
+F:	include/dt-bindings/reset/actions,*
 F:	include/linux/soc/actions/
 N:	owl
 
Signature · 1 line
2.27.0