Add RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
Subsystems (4)
v3 cover Add RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
This patch series is a stripped-down revision of the initial series "[PATCH 00/11] Add CMU/RMU/DMA support for Actions Semi S500 SoCs":
https://lore.kernel.org/lkml/[email protected]/
At Stephen's request, I detached all DTS related work to keep the focus exclusively on the Actions S500 SoC clock driver changes:
- Add support for some missing clocks: APB, DMAC, GPIO
- Add support for Reset Management Unit
The removed patches are subject to resubmission via a separate series:
- arm: dts: owl-s500: Add Clock Management Unit
- arm: dts: owl-s500: Set UART clock refs from CMU
- arm: dts: owl-s500-roseapplepi: Use UART clock from CMU
- arm: dts: owl-s500: Add DMA controller
- arm: dts: owl-s500: Add Reset Controller support
Regards,
Cristi
Changes in v3:
- Incorporated feedback from Stephen and Mani
- Rebased on v5.8-rc3
Changes in v2:
- Incorporated Stephen's review comments
- Removed DTS related patches
- Rebased remaining patches on v5.8-rc2
- Updated cover letter, both subject and content, to reflect the new scope
Cristian Ciocaltea (6):
clk: actions: Fix h_clk for Actions S500 SoC
dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
dt-bindings: reset: Add binding constants for Actions S500 RMU
clk: actions: Add Actions S500 SoC Reset Management Unit support
MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
MAINTAINERS | 1 + drivers/clk/actions/owl-s500.c | 89 ++++++++++++++++++- include/dt-bindings/clock/actions,s500-cmu.h | 7 +- .../dt-bindings/reset/actions,s500-reset.h | 67 ++++++++++++++ 4 files changed, 162 insertions(+), 2 deletions(-) create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
Signature · 1 line
2.27.0
PATCH v3 1/6 clk: actions: Fix h_clk for Actions S500 SoC
The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one.
---
Changes in v3:
- Added Fixes tag
- Added Mani's Reviewed-by tag
Changes in v2:
- None
drivers/clk/actions/owl-s500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/actions/owl-s500.c +1 -1
@@ -183,7 +183,7 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0); static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);/* divider clocks */ -static OWL_DIVIDER(h_clk, "h_clk", "ahbprevdiv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); +static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);/* factor clocks */
Signature · 1 line
2.27.0
Re: [PATCH v3 1/6] clk: actions: Fix h_clk for Actions S500 SoC
Quoting Cristian Ciocaltea (2020-07-03 10:05:07)
Quoted 7 lines
The
h_clkclock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one.Fixes ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")Signed-off-by Cristian Ciocaltea <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>---
Applied to clk-next
PATCH v3 2/6 dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
In reply to Cristian CiocalteaAdd the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.
---
Changes in v3:
- Preserved the original values of the existing bindings and moved the newly added constants bellow, as indicated by Stephen
Changes in v2:
- None
include/dt-bindings/clock/actions,s500-cmu.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
include/dt-bindings/clock/actions,s500-cmu.h +6 -1
@@ -72,7 +72,12 @@#define CLK_NAND 52#define CLK_ECC 53#define CLK_RMII_REF 54 +#define CLK_GPIO 55 -#define CLK_NR_CLKS (CLK_RMII_REF + 1) +/* system clock (part 2) */ +#define CLK_APB 56 +#define CLK_DMAC 57 + +#define CLK_NR_CLKS (CLK_DMAC + 1)#endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */
Signature · 1 line
2.27.0
Re: [PATCH v3 2/6] dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
Quoted 4 lines · Cristian Ciocaltea
Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.
Signed-off-by Cristian Ciocaltea <[email protected]>
Thanks,
Mani
Quoted 32 lines
---
Changes in v3:
- Preserved the original values of the existing bindings and moved the newly added constants bellow, as indicated by StephenChanges in v2:
- Noneinclude/dt-bindings/clock/actions,s500-cmu.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)include/dt-bindings/clock/actions,s500-cmu.h +6
-1@@ -72,7 +72,12 @@#define CLK_NAND 52#define CLK_ECC 53#define CLK_RMII_REF 54 +#define CLK_GPIO 55 -#define CLK_NR_CLKS (CLK_RMII_REF + 1) +/* system clock (part 2) */ +#define CLK_APB 56 +#define CLK_DMAC 57 + +#define CLK_NR_CLKS (CLK_DMAC + 1)#endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */ Signature · 1 line
2.27.0
Re: [PATCH v3 2/6] dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
In reply to Cristian CiocalteaQuoted 9 lines · Cristian Ciocaltea
Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.
Signed-off-by Cristian Ciocaltea <[email protected]>---
Changes in v3:
- Preserved the original values of the existing bindings and moved the newly added constants bellow, as indicated by Stephen
Quoted 6 lines
Changes in v2:
- Noneinclude/dt-bindings/clock/actions,s500-cmu.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
Re: [PATCH v3 2/6] dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
In reply to Cristian CiocalteaQuoting Cristian Ciocaltea (2020-07-03 10:05:08)
Quoted 5 lines
Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC.
Signed-off-by Cristian Ciocaltea <[email protected]>---
Applied to clk-next
PATCH v3 3/6 clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
In reply to Cristian CiocalteaAdd support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver.
---
Changes in v3:
- None
Changes in v2:
- None
drivers/clk/actions/owl-s500.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/clk/actions/owl-s500.c +9 -0
@@ -175,6 +175,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);/* gate clocks */ +static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0); +static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0); static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED); static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED); static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED);
@@ -184,6 +186,7 @@ static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);/* divider clocks */ static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); +static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0); static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);/* factor clocks */
@@ -428,6 +431,9 @@ static struct owl_clk_common *s500_clks[] = { &spdif_clk.common, &nand_clk.common, &ecc_clk.common, + &apb_clk.common, + &dmac_clk.common, + &gpio_clk.common, }; static struct clk_hw_onecell_data s500_hw_clks = {
@@ -484,6 +490,9 @@ static struct clk_hw_onecell_data s500_hw_clks = { [CLK_SPDIF] = &spdif_clk.common.hw, [CLK_NAND] = &nand_clk.common.hw, [CLK_ECC] = &ecc_clk.common.hw, + [CLK_APB] = &apb_clk.common.hw, + [CLK_DMAC] = &dmac_clk.common.hw, + [CLK_GPIO] = &gpio_clk.common.hw, }, .num = CLK_NR_CLKS, };
Signature · 1 line
2.27.0
Re: [PATCH v3 3/6] clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
Quoted 4 lines · Cristian Ciocaltea
Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver.
Signed-off-by Cristian Ciocaltea <[email protected]>
Thanks,
Mani
Quoted 54 lines
---
Changes in v3:
- NoneChanges in v2:
- Nonedrivers/clk/actions/owl-s500.c | 9 +++++++++ 1 file changed, 9 insertions(+)drivers/clk/actions/owl-s500.c +9
-0@@ -175,6 +175,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);/* gate clocks */ +static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0); +static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0); static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED); static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED); static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED);@@ -184,6 +186,7 @@ static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);/* divider clocks */ static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); +static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0); static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);/* factor clocks */ @@ -428,6 +431,9 @@ static struct owl_clk_common *s500_clks[] = { &spdif_clk.common, &nand_clk.common, &ecc_clk.common, + &apb_clk.common, + &dmac_clk.common, + &gpio_clk.common, }; static struct clk_hw_onecell_data s500_hw_clks = {@@ -484,6 +490,9 @@ static struct clk_hw_onecell_data s500_hw_clks = { [CLK_SPDIF] = &spdif_clk.common.hw, [CLK_NAND] = &nand_clk.common.hw, [CLK_ECC] = &ecc_clk.common.hw, + [CLK_APB] = &apb_clk.common.hw, + [CLK_DMAC] = &dmac_clk.common.hw, + [CLK_GPIO] = &gpio_clk.common.hw, }, .num = CLK_NR_CLKS, };Signature · 1 line
2.27.0
Re: [PATCH v3 3/6] clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
In reply to Cristian CiocalteaQuoting Cristian Ciocaltea (2020-07-03 10:05:09)
Quoted 5 lines
Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver.
Signed-off-by Cristian Ciocaltea <[email protected]>---
Applied to clk-next
PATCH v3 4/6 dt-bindings: reset: Add binding constants for Actions S500 RMU
In reply to Cristian CiocalteaAdd device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).
---
Changes in v3:
- Added Philipp's Acked-by tag
Changes in v2:
- None
.../dt-bindings/reset/actions,s500-reset.h | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
include/dt-bindings/reset/actions,s500-reset.h new file +67 -0
@@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Device Tree binding constants for Actions Semi S500 Reset Management Unit +* +* Copyright (c) 2014 Actions Semi Inc. +* Copyright (c) 2020 Cristian Ciocaltea <[email protected]> +*/ + +#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H +#define __DT_BINDINGS_ACTIONS_S500_RESET_H + +#define RESET_DMAC 0 +#define RESET_NORIF 1 +#define RESET_DDR 2 +#define RESET_NANDC 3 +#define RESET_SD0 4 +#define RESET_SD1 5 +#define RESET_PCM1 6 +#define RESET_DE 7 +#define RESET_LCD 8 +#define RESET_SD2 9 +#define RESET_DSI 10 +#define RESET_CSI 11 +#define RESET_BISP 12 +#define RESET_KEY 13 +#define RESET_GPIO 14 +#define RESET_AUDIO 15 +#define RESET_PCM0 16 +#define RESET_VDE 17 +#define RESET_VCE 18 +#define RESET_GPU3D 19 +#define RESET_NIC301 20 +#define RESET_LENS 21 +#define RESET_PERIPHRESET 22 +#define RESET_USB2_0 23 +#define RESET_TVOUT 24 +#define RESET_HDMI 25 +#define RESET_HDCP2TX 26 +#define RESET_UART6 27 +#define RESET_UART0 28 +#define RESET_UART1 29 +#define RESET_UART2 30 +#define RESET_SPI0 31 +#define RESET_SPI1 32 +#define RESET_SPI2 33 +#define RESET_SPI3 34 +#define RESET_I2C0 35 +#define RESET_I2C1 36 +#define RESET_USB3 37 +#define RESET_UART3 38 +#define RESET_UART4 39 +#define RESET_UART5 40 +#define RESET_I2C2 41 +#define RESET_I2C3 42 +#define RESET_ETHERNET 43 +#define RESET_CHIPID 44 +#define RESET_USB2_1 45 +#define RESET_WD0RESET 46 +#define RESET_WD1RESET 47 +#define RESET_WD2RESET 48 +#define RESET_WD3RESET 49 +#define RESET_DBG0RESET 50 +#define RESET_DBG1RESET 51 +#define RESET_DBG2RESET 52 +#define RESET_DBG3RESET 53 + +#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */
Signature · 1 line
2.27.0
Re: [PATCH v3 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU
Quoted 5 lines · Cristian Ciocaltea
Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).
Signed-off-by Cristian Ciocaltea <[email protected]>Acked-by Philipp Zabel <[email protected]>
Thanks,
Mani
Quoted 87 lines
---
Changes in v3:
- Added Philipp's Acked-by tagChanges in v2:
- None.../dt-bindings/reset/actions,s500-reset.h | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 include/dt-bindings/reset/actions,s500-reset.hinclude/dt-bindings/reset/actions,s500-reset.h new file +67
-0@@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Device Tree binding constants for Actions Semi S500 Reset Management Unit +* +* Copyright (c) 2014 Actions Semi Inc. +* Copyright (c) 2020 Cristian Ciocaltea <[email protected]> +*/ + +#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H +#define __DT_BINDINGS_ACTIONS_S500_RESET_H + +#define RESET_DMAC 0 +#define RESET_NORIF 1 +#define RESET_DDR 2 +#define RESET_NANDC 3 +#define RESET_SD0 4 +#define RESET_SD1 5 +#define RESET_PCM1 6 +#define RESET_DE 7 +#define RESET_LCD 8 +#define RESET_SD2 9 +#define RESET_DSI 10 +#define RESET_CSI 11 +#define RESET_BISP 12 +#define RESET_KEY 13 +#define RESET_GPIO 14 +#define RESET_AUDIO 15 +#define RESET_PCM0 16 +#define RESET_VDE 17 +#define RESET_VCE 18 +#define RESET_GPU3D 19 +#define RESET_NIC301 20 +#define RESET_LENS 21 +#define RESET_PERIPHRESET 22 +#define RESET_USB2_0 23 +#define RESET_TVOUT 24 +#define RESET_HDMI 25 +#define RESET_HDCP2TX 26 +#define RESET_UART6 27 +#define RESET_UART0 28 +#define RESET_UART1 29 +#define RESET_UART2 30 +#define RESET_SPI0 31 +#define RESET_SPI1 32 +#define RESET_SPI2 33 +#define RESET_SPI3 34 +#define RESET_I2C0 35 +#define RESET_I2C1 36 +#define RESET_USB3 37 +#define RESET_UART3 38 +#define RESET_UART4 39 +#define RESET_UART5 40 +#define RESET_I2C2 41 +#define RESET_I2C3 42 +#define RESET_ETHERNET 43 +#define RESET_CHIPID 44 +#define RESET_USB2_1 45 +#define RESET_WD0RESET 46 +#define RESET_WD1RESET 47 +#define RESET_WD2RESET 48 +#define RESET_WD3RESET 49 +#define RESET_DBG0RESET 50 +#define RESET_DBG1RESET 51 +#define RESET_DBG2RESET 52 +#define RESET_DBG3RESET 53 + +#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */ Signature · 1 line
2.27.0
Re: [PATCH v3 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU
In reply to Cristian CiocalteaQuoted 9 lines · Cristian Ciocaltea
Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).
Signed-off-by Cristian Ciocaltea <[email protected]>Acked-by Philipp Zabel <[email protected]>---
Changes in v3:
- Added Philipp's Acked-by tag
Quoted 7 lines
Changes in v2:
- None.../dt-bindings/reset/actions,s500-reset.h | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
Re: [PATCH v3 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU
In reply to Cristian CiocalteaQuoting Cristian Ciocaltea (2020-07-03 10:05:10)
Quoted 6 lines
Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU).
Signed-off-by Cristian Ciocaltea <[email protected]>Acked-by Philipp Zabel <[email protected]>---
Applied to clk-next
PATCH v3 5/6 clk: actions: Add Actions S500 SoC Reset Management Unit support
In reply to Cristian CiocalteaAdd Reset Management Unit (RMU) support for Actions Semi S500 SoC.
---
Changes in v3:
- Added Mani's Reviewed-by tag
Changes in v2:
- Removed copyright as indicated by Stephen
drivers/clk/actions/owl-s500.c | 78 ++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+)
drivers/clk/actions/owl-s500.c +78 -0
@@ -23,8 +23,10 @@#include "owl-gate.h" #include "owl-mux.h" #include "owl-pll.h" +#include "owl-reset.h" #include <dt-bindings/clock/actions,s500-cmu.h> +#include <dt-bindings/reset/actions,s500-reset.h> #define CMU_COREPLL (0x0000)#define CMU_DEVPLL (0x0004)
@@ -497,20 +499,96 @@ static struct clk_hw_onecell_data s500_hw_clks = { .num = CLK_NR_CLKS, }; +static const struct owl_reset_map s500_resets[] = { + [RESET_DMAC ] = {CMU_DEVRST0 ,BIT (0 ) }, + [RESET_NORIF ] = {CMU_DEVRST0 ,BIT (1 ) }, + [RESET_DDR ] = {CMU_DEVRST0 ,BIT (2 ) }, + [RESET_NANDC ] = {CMU_DEVRST0 ,BIT (3 ) }, + [RESET_SD0 ] = {CMU_DEVRST0 ,BIT (4 ) }, + [RESET_SD1 ] = {CMU_DEVRST0 ,BIT (5 ) }, + [RESET_PCM1 ] = {CMU_DEVRST0 ,BIT (6 ) }, + [RESET_DE ] = {CMU_DEVRST0 ,BIT (7 ) }, + [RESET_LCD ] = {CMU_DEVRST0 ,BIT (8 ) }, + [RESET_SD2 ] = {CMU_DEVRST0 ,BIT (9 ) }, + [RESET_DSI ] = {CMU_DEVRST0 ,BIT (10 ) }, + [RESET_CSI ] = {CMU_DEVRST0 ,BIT (11 ) }, + [RESET_BISP ] = {CMU_DEVRST0 ,BIT (12 ) }, + [RESET_KEY ] = {CMU_DEVRST0 ,BIT (14 ) }, + [RESET_GPIO ] = {CMU_DEVRST0 ,BIT (15 ) }, + [RESET_AUDIO ] = {CMU_DEVRST0 ,BIT (17 ) }, + [RESET_PCM0 ] = {CMU_DEVRST0 ,BIT (18 ) }, + [RESET_VDE ] = {CMU_DEVRST0 ,BIT (19 ) }, + [RESET_VCE ] = {CMU_DEVRST0 ,BIT (20 ) }, + [RESET_GPU3D ] = {CMU_DEVRST0 ,BIT (22 ) }, + [RESET_NIC301 ] = {CMU_DEVRST0 ,BIT (23 ) }, + [RESET_LENS ] = {CMU_DEVRST0 ,BIT (26 ) }, + [RESET_PERIPHRESET ] = {CMU_DEVRST0 ,BIT (27 ) }, + [RESET_USB2_0 ] = {CMU_DEVRST1 ,BIT (0 ) }, + [RESET_TVOUT ] = {CMU_DEVRST1 ,BIT (1 ) }, + [RESET_HDMI ] = {CMU_DEVRST1 ,BIT (2 ) }, + [RESET_HDCP2TX ] = {CMU_DEVRST1 ,BIT (3 ) }, + [RESET_UART6 ] = {CMU_DEVRST1 ,BIT (4 ) }, + [RESET_UART0 ] = {CMU_DEVRST1 ,BIT (5 ) }, + [RESET_UART1 ] = {CMU_DEVRST1 ,BIT (6 ) }, + [RESET_UART2 ] = {CMU_DEVRST1 ,BIT (7 ) }, + [RESET_SPI0 ] = {CMU_DEVRST1 ,BIT (8 ) }, + [RESET_SPI1 ] = {CMU_DEVRST1 ,BIT (9 ) }, + [RESET_SPI2 ] = {CMU_DEVRST1 ,BIT (10 ) }, + [RESET_SPI3 ] = {CMU_DEVRST1 ,BIT (11 ) }, + [RESET_I2C0 ] = {CMU_DEVRST1 ,BIT (12 ) }, + [RESET_I2C1 ] = {CMU_DEVRST1 ,BIT (13 ) }, + [RESET_USB3 ] = {CMU_DEVRST1 ,BIT (14 ) }, + [RESET_UART3 ] = {CMU_DEVRST1 ,BIT (15 ) }, + [RESET_UART4 ] = {CMU_DEVRST1 ,BIT (16 ) }, + [RESET_UART5 ] = {CMU_DEVRST1 ,BIT (17 ) }, + [RESET_I2C2 ] = {CMU_DEVRST1 ,BIT (18 ) }, + [RESET_I2C3 ] = {CMU_DEVRST1 ,BIT (19 ) }, + [RESET_ETHERNET ] = {CMU_DEVRST1 ,BIT (20 ) }, + [RESET_CHIPID ] = {CMU_DEVRST1 ,BIT (21 ) }, + [RESET_USB2_1 ] = {CMU_DEVRST1 ,BIT (22 ) }, + [RESET_WD0RESET ] = {CMU_DEVRST1 ,BIT (24 ) }, + [RESET_WD1RESET ] = {CMU_DEVRST1 ,BIT (25 ) }, + [RESET_WD2RESET ] = {CMU_DEVRST1 ,BIT (26 ) }, + [RESET_WD3RESET ] = {CMU_DEVRST1 ,BIT (27 ) }, + [RESET_DBG0RESET ] = {CMU_DEVRST1 ,BIT (28 ) }, + [RESET_DBG1RESET ] = {CMU_DEVRST1 ,BIT (29 ) }, + [RESET_DBG2RESET ] = {CMU_DEVRST1 ,BIT (30 ) }, + [RESET_DBG3RESET ] = {CMU_DEVRST1 ,BIT (31 ) }, +}; +static struct owl_clk_desc s500_clk_desc = { .clks = s500_clks, .num_clks =ARRAY_SIZE (s500_clks), .hw_clks = &s500_hw_clks, + + .resets = s500_resets, + .num_resets =ARRAY_SIZE (s500_resets), };static int s500_clk_probe (struct platform_device *pdev) {struct owl_clk_desc *desc; +struct owl_reset *reset; +int ret; desc = &s500_clk_desc;owl_clk_regmap_init (pdev, desc); + reset =devm_kzalloc (&pdev->dev,sizeof (*reset),GFP_KERNEL ); +if (!reset) +return -ENOMEM ; + + reset->rcdev.of_node = pdev->dev.of_node; + reset->rcdev.ops = &owl_reset_ops; + reset->rcdev.nr_resets = desc->num_resets; + reset->reset_map = desc->resets; + reset->regmap = desc->regmap; + + ret =devm_reset_controller_register (&pdev->dev, &reset->rcdev); +if (ret) +dev_err (&pdev->dev,"Failed to register reset controller\n" ); +return owl_clk_probe (&pdev->dev, desc->hw_clks); }
Signature · 1 line
2.27.0
Re: [PATCH v3 5/6] clk: actions: Add Actions S500 SoC Reset Management Unit support
Quoting Cristian Ciocaltea (2020-07-03 10:05:11)
Quoted 5 lines
Add Reset Management Unit (RMU) support for Actions Semi S500 SoC.
Signed-off-by Cristian Ciocaltea <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>---
Applied to clk-next
PATCH v3 6/6 MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
In reply to Cristian CiocalteaAdd a reset binding entry to match all members of Actions Semi Owl SoCs.
---
Changes in v3:
- Removed the "-reset.h" suffix from the binding entry, as suggested by Mani
Changes in v2:
- None
MAINTAINERS | 1 + 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
@@ -1533,6 +1533,7 @@ F: drivers/mmc/host/owl-mmc.c F: drivers/pinctrl/actions/* F: drivers/soc/actions/ F: include/dt-bindings/power/owl-* +F: include/dt-bindings/reset/actions,* F: include/linux/soc/actions/ N: owl
Signature · 1 line
2.27.0
Re: [PATCH v3 6/6] MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
Quoted 3 lines · Cristian Ciocaltea
Add a reset binding entry to match all members of Actions Semi Owl SoCs.
Signed-off-by Cristian Ciocaltea <[email protected]>
Thanks,
Mani
Quoted 26 lines
---
Changes in v3:
- Removed the "-reset.h" suffix from the binding entry, as suggested by ManiChanges in v2:
- NoneMAINTAINERS | 1 + 1 file changed, 1 insertion(+)MAINTAINERS +1
-0@@ -1533,6 +1533,7 @@ F: drivers/mmc/host/owl-mmc.c F: drivers/pinctrl/actions/* F: drivers/soc/actions/ F: include/dt-bindings/power/owl-* +F: include/dt-bindings/reset/actions,* F: include/linux/soc/actions/ N: owlSignature · 1 line
2.27.0
Re: [PATCH v3 6/6] MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
In reply to Cristian CiocalteaQuoting Cristian Ciocaltea (2020-07-03 10:05:12)
Quoted 4 lines
Add a reset binding entry to match all members of Actions Semi Owl SoCs.
Signed-off-by Cristian Ciocaltea <[email protected]>---
Applied to clk-next