Skip to contentSkip to conversation

bcache: extend bucket size to 32bit width

PATCH New Coly Li 1 participant 17 messages Jul 17, 2020

Subsystems (2)
lore
Share & tools
lore

Coly Li

author
#0 lore raw

v4 cover bcache: extend bucket size to 32bit width

This patch series is an effort to extent bucket_size from 16bit to 32bit width. This is the code base for next step to use zoned device as cache device.

In this series, these changes should be noticed,
- Increase the super block version to
BCACHE_SB_VERSION_CDEV_WITH_FEATURES 5
BCACHE_SB_VERSION_BDEV_WITH_FEATURES 6
- The new version adds 3 new members,

        __le64          feature_compat;
        __le64          feature_incompat;
        __le64          feature_ro_compat;

If new feature added will change the on-disk format, just setting the feature set bits, no need to upstream super block version.
- The in-memory struct cache_sb does not exactly map the on-disk struct cache_sb_disk.
- Add 32bit bucket_size_hi in struct cache_sb_disk,

        __le32          bucket_size_hi;

In theory bucket_size can be extended to 48bit, but now 32bit width is big enough.
- Other changes to follow the large bucket size.

The changes are mostly on cache device, except the super block update there is no change about the backing device.

Any code review comments or suggestion is welcome. Thanks in advance.

Coly Li
---
Changelog:
v4: Update with Hannes' comments of v3 series code review.
v3: Update with Hannes' comments of v2 series code review.
v2: several bug fixes, and add sysfs file to display cache set feature
sets information.
v1: initial RFC version.

Coly Li (16):
bcache: add read_super_common() to read major part of super block
bcache: add more accurate error information in read_super_common()
bcache: disassemble the big if() checks in bch_cache_set_alloc()
bcache: fix super block seq numbers comparision in
register_cache_set()
bcache: increase super block version for cache device and backing
device
bcache: move bucket related code into read_super_common()
bcache: struct cache_sb is only for in-memory super block now
bcache: introduce meta_bucket_pages() related helper routines
bcache: handle c->uuids properly for bucket size > 8MB
bcache: handle cache prio_buckets and disk_buckets properly for bucket
size > 8MB
bcache: handle cache set verify_ondisk properly for bucket size > 8MB
bcache: handle btree node memory allocation properly for bucket size >

    8MB

bcache: add bucket_size_hi into struct cache_sb_disk for large bucket
bcache: add sysfs file to display feature sets information of cache
set
bcache: avoid extra memory allocation from mempool c->fill_iter
bcache: avoid extra memory consumption in struct bbio for large bucket
size

 drivers/md/bcache/Makefile   |   2 +-
 drivers/md/bcache/alloc.c    |   2 +-
 drivers/md/bcache/bcache.h   |  29 +++-
 drivers/md/bcache/btree.c    |  12 +-
 drivers/md/bcache/features.c |  75 ++++++++++
 drivers/md/bcache/features.h |  86 ++++++++++++
 drivers/md/bcache/io.c       |   2 +-
 drivers/md/bcache/movinggc.c |   4 +-
 drivers/md/bcache/super.c    | 261 ++++++++++++++++++++++++-----------
 drivers/md/bcache/sysfs.c    |  14 ++
 include/uapi/linux/bcache.h  |  38 +++--
 11 files changed, 422 insertions(+), 103 deletions(-)
 create mode 100644 drivers/md/bcache/features.c
 create mode 100644 drivers/md/bcache/features.h
Signature · 1 line
2.26.2
author
#1 lore raw

PATCH v4 1/16 bcache: add read_super_common() to read major part of super block

Later patches will introduce feature set bits to on-disk super block and increase super block version. Current code in read_super() which reads common part of super block for version BCACHE_SB_VERSION_CDEV and version BCACHE_SB_VERSION_CDEV_WITH_UUID will be shared with the new version.

Therefore this patch moves the reusable part into read_super_common(), this preparation patch will make later patches more simplier and only focus on new feature set bits.

---
 drivers/md/bcache/super.c | 111 +++++++++++++++++++++-----------------
 1 file changed, 63 insertions(+), 48 deletions(-)
drivers/md/bcache/super.c +63 -48
index 05ad1cd9f329..b5b81b92b2ef 100644
@@ -59,6 +59,67 @@ struct workqueue_struct *bch_journal_wq;
 
 /* Superblock */
 
+static const char *read_super_common(struct cache_sb *sb,  struct block_device *bdev,
+				     struct cache_sb_disk *s)
+{
+	const char *err;
+	unsigned int i;
+
+	sb->nbuckets	= le64_to_cpu(s->nbuckets);
+	sb->bucket_size	= le16_to_cpu(s->bucket_size);
+
+	sb->nr_in_set	= le16_to_cpu(s->nr_in_set);
+	sb->nr_this_dev	= le16_to_cpu(s->nr_this_dev);
+
+	err = "Too many buckets";
+	if (sb->nbuckets > LONG_MAX)
+		goto err;
+
+	err = "Not enough buckets";
+	if (sb->nbuckets < 1 << 7)
+		goto err;
+
+	err = "Bad block/bucket size";
+	if (!is_power_of_2(sb->block_size) ||
+	    sb->block_size > PAGE_SECTORS ||
+	    !is_power_of_2(sb->bucket_size) ||
+	    sb->bucket_size < PAGE_SECTORS)
+		goto err;
+
+	err = "Invalid superblock: device too small";
+	if (get_capacity(bdev->bd_disk) <
+	    sb->bucket_size * sb->nbuckets)
+		goto err;
+
+	err = "Bad UUID";
+	if (bch_is_zero(sb->set_uuid, 16))
+		goto err;
+
+	err = "Bad cache device number in set";
+	if (!sb->nr_in_set ||
+	    sb->nr_in_set <= sb->nr_this_dev ||
+	    sb->nr_in_set > MAX_CACHES_PER_SET)
+		goto err;
+
+	err = "Journal buckets not sequential";
+	for (i = 0; i < sb->keys; i++)
+		if (sb->d[i] != sb->first_bucket + i)
+			goto err;
+
+	err = "Too many journal buckets";
+	if (sb->first_bucket + sb->keys > sb->nbuckets)
+		goto err;
+
+	err = "Invalid superblock: first bucket comes before end of super";
+	if (sb->first_bucket * sb->bucket_size < 16)
+		goto err;
+
+	err = NULL;
+err:
+	return err;
+}
+
+
 static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 			      struct cache_sb_disk **res)
 {
@@ -133,55 +194,9 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 		break;
 	case BCACHE_SB_VERSION_CDEV:
 	case BCACHE_SB_VERSION_CDEV_WITH_UUID:
-		sb->nbuckets	= le64_to_cpu(s->nbuckets);
-		sb->bucket_size	= le16_to_cpu(s->bucket_size);
-
-		sb->nr_in_set	= le16_to_cpu(s->nr_in_set);
-		sb->nr_this_dev	= le16_to_cpu(s->nr_this_dev);
-
-		err = "Too many buckets";
-		if (sb->nbuckets > LONG_MAX)
-			goto err;
-
-		err = "Not enough buckets";
-		if (sb->nbuckets < 1 << 7)
-			goto err;
-
-		err = "Bad block/bucket size";
-		if (!is_power_of_2(sb->block_size) ||
-		    sb->block_size > PAGE_SECTORS ||
-		    !is_power_of_2(sb->bucket_size) ||
-		    sb->bucket_size < PAGE_SECTORS)
-			goto err;
-
-		err = "Invalid superblock: device too small";
-		if (get_capacity(bdev->bd_disk) <
-		    sb->bucket_size * sb->nbuckets)
-			goto err;
-
-		err = "Bad UUID";
-		if (bch_is_zero(sb->set_uuid, 16))
-			goto err;
-
-		err = "Bad cache device number in set";
-		if (!sb->nr_in_set ||
-		    sb->nr_in_set <= sb->nr_this_dev ||
-		    sb->nr_in_set > MAX_CACHES_PER_SET)
-			goto err;
-
-		err = "Journal buckets not sequential";
-		for (i = 0; i < sb->keys; i++)
-			if (sb->d[i] != sb->first_bucket + i)
-				goto err;
-
-		err = "Too many journal buckets";
-		if (sb->first_bucket + sb->keys > sb->nbuckets)
-			goto err;
-
-		err = "Invalid superblock: first bucket comes before end of super";
-		if (sb->first_bucket * sb->bucket_size < 16)
+		err = read_super_common(sb, bdev, s);
+		if (err)
 			goto err;
-
 		break;
 	default:
 		err = "Unsupported superblock version";
Signature · 1 line
2.26.2
author
#2 lore raw

PATCH v4 2/16 bcache: add more accurate error information in read_super_common()

In reply to Coly Li

The improperly set bucket or block size will trigger error in read_super_common(). For large bucket size, a more accurate error message for invalid bucket or block size is necessary.

This patch disassembles the combined if() checks into multiple single if() check, and provide more accurate error message for each check failure condition.

---
 drivers/md/bcache/super.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
drivers/md/bcache/super.c +14 -5
index b5b81b92b2ef..fd8c9ee4d4a6 100644
@@ -79,11 +79,20 @@ static const char *read_super_common(struct cache_sb *sb,  struct block_device *
 	if (sb->nbuckets < 1 << 7)
 		goto err;
 
-	err = "Bad block/bucket size";
-	if (!is_power_of_2(sb->block_size) ||
-	    sb->block_size > PAGE_SECTORS ||
-	    !is_power_of_2(sb->bucket_size) ||
-	    sb->bucket_size < PAGE_SECTORS)
+	err = "Bad block size (not power of 2)";
+	if (!is_power_of_2(sb->block_size))
+		goto err;
+
+	err = "Bad block size (larger than page size)";
+	if (sb->block_size > PAGE_SECTORS)
+		goto err;
+
+	err = "Bad bucket size (not power of 2)";
+	if (!is_power_of_2(sb->bucket_size))
+		goto err;
+
+	err = "Bad bucket size (smaller than page size)";
+	if (sb->bucket_size < PAGE_SECTORS)
 		goto err;
 
 	err = "Invalid superblock: device too small";
Signature · 1 line
2.26.2
author
#3 lore raw

PATCH v4 3/16 bcache: disassemble the big if() checks in bch_cache_set_alloc()

In reply to Coly Li

In bch_cache_set_alloc() there is a big if() checks combined by 11 items together. When this big if() statement fails, it is difficult to tell exactly which item fails indeed.

This patch disassembles this big if() checks into 11 single if() checks, which makes code debug more easier.

---
 drivers/md/bcache/super.c | 52 ++++++++++++++++++++++++++++-----------
 1 file changed, 37 insertions(+), 15 deletions(-)
drivers/md/bcache/super.c +37 -15
index fd8c9ee4d4a6..7ad6bbabfc66 100644
@@ -1865,21 +1865,43 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	iter_size = (sb->bucket_size / sb->block_size + 1) *
 		sizeof(struct btree_iter_set);
 
-	if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
-	    mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
-	    mempool_init_kmalloc_pool(&c->bio_meta, 2,
-				sizeof(struct bbio) + sizeof(struct bio_vec) *
-				bucket_pages(c)) ||
-	    mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
-	    bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
-			BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
-	    !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
-	    !(c->moving_gc_wq = alloc_workqueue("bcache_gc",
-						WQ_MEM_RECLAIM, 0)) ||
-	    bch_journal_alloc(c) ||
-	    bch_btree_cache_alloc(c) ||
-	    bch_open_buckets_alloc(c) ||
-	    bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
+	c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL);
+	if (!c->devices)
+		goto err;
+
+	if (mempool_init_slab_pool(&c->search, 32, bch_search_cache))
+		goto err;
+
+	if (mempool_init_kmalloc_pool(&c->bio_meta, 2,
+			sizeof(struct bbio) +
+			sizeof(struct bio_vec) * bucket_pages(c)))
+		goto err;
+
+	if (mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size))
+		goto err;
+
+	if (bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
+			BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER))
+		goto err;
+
+	c->uuids = alloc_bucket_pages(GFP_KERNEL, c);
+	if (!c->uuids)
+		goto err;
+
+	c->moving_gc_wq = alloc_workqueue("bcache_gc", WQ_MEM_RECLAIM, 0);
+	if (!c->moving_gc_wq)
+		goto err;
+
+	if (bch_journal_alloc(c))
+		goto err;
+
+	if (bch_btree_cache_alloc(c))
+		goto err;
+
+	if (bch_open_buckets_alloc(c))
+		goto err;
+
+	if (bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
 		goto err;
 
 	c->congested_read_threshold_us	= 2000;
Signature · 1 line
2.26.2
author
#4 lore raw

PATCH v4 4/16 bcache: fix super block seq numbers comparision in register_cache_set()

In reply to Coly Li

In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {

2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);

2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly.

But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered.

This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device.

---
 drivers/md/bcache/super.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/md/bcache/super.c +8 -1
index 7ad6bbabfc66..d5ed8f31e123 100644
@@ -2146,7 +2146,14 @@ static const char *register_cache_set(struct cache *ca)
 	    sysfs_create_link(&c->kobj, &ca->kobj, buf))
 		goto err;
 
-	if (ca->sb.seq > c->sb.seq) {
+	/*
+	 * A special case is both ca->sb.seq and c->sb.seq are 0,
+	 * such condition happens on a new created cache device whose
+	 * super block is never flushed yet. In this case c->sb.version
+	 * and other members should be updated too, otherwise we will
+	 * have a mistaken super block version in cache set.
+	 */
+	if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
 		c->sb.version		= ca->sb.version;
 		memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
 		c->sb.flags             = ca->sb.flags;
Signature · 1 line
2.26.2
author
#5 lore raw

PATCH v4 5/16 bcache: increase super block version for cache device and backing device

In reply to Coly Li

The new added super block version BCACHE_SB_VERSION_BDEV_WITH_FEATURES
(5) BCACHE_SB_VERSION_CDEV_WITH_FEATURES value (6), is for the feature set bits.

Devices have super block version equal to the new version will have three new members for feature set bits in the on-disk super block,

        __le64                  feature_compat;
        __le64                  feature_incompat;
        __le64                  feature_ro_compat;

They are used for further new features which may introduce on-disk format change, and avoid unncessary super block version increase.

The very basic features handling code skeleton is also initialized in this patch.

---
 drivers/md/bcache/features.h | 78 ++++++++++++++++++++++++++++++++++++
 drivers/md/bcache/super.c    | 32 +++++++++++++--
 include/uapi/linux/bcache.h  | 29 ++++++++++----
 3 files changed, 128 insertions(+), 11 deletions(-)
 create mode 100644 drivers/md/bcache/features.h
drivers/md/bcache/features.h new file +78 -0
new file mode 100644
index 000000000000..ae7df37b9862
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _BCACHE_FEATURES_H
+#define _BCACHE_FEATURES_H
+
+#include <linux/bcache.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#define BCH_FEATURE_COMPAT		0
+#define BCH_FEATURE_RO_COMPAT		1
+#define BCH_FEATURE_INCOMPAT		2
+#define BCH_FEATURE_TYPE_MASK		0x03
+
+#define BCH_FEATURE_COMPAT_SUUP		0
+#define BCH_FEATURE_RO_COMPAT_SUUP	0
+#define BCH_FEATURE_INCOMPAT_SUUP	0
+
+#define BCH_HAS_COMPAT_FEATURE(sb, mask) \
+		((sb)->feature_compat & (mask))
+#define BCH_HAS_RO_COMPAT_FEATURE(sb, mask) \
+		((sb)->feature_ro_compat & (mask))
+#define BCH_HAS_INCOMPAT_FEATURE(sb, mask) \
+		((sb)->feature_incompat & (mask))
+
+/* Feature set definition */
+
+#define BCH_FEATURE_COMPAT_FUNCS(name, flagname) \
+static inline int bch_has_feature_##name(struct cache_sb *sb) \
+{ \
+	return (((sb)->feature_compat & \
+		BCH##_FEATURE_COMPAT_##flagname) != 0); \
+} \
+static inline void bch_set_feature_##name(struct cache_sb *sb) \
+{ \
+	(sb)->feature_compat |= \
+		BCH##_FEATURE_COMPAT_##flagname; \
+} \
+static inline void bch_clear_feature_##name(struct cache_sb *sb) \
+{ \
+	(sb)->feature_compat &= \
+		~BCH##_FEATURE_COMPAT_##flagname; \
+}
+
+#define BCH_FEATURE_RO_COMPAT_FUNCS(name, flagname) \
+static inline int bch_has_feature_##name(struct cache_sb *sb) \
+{ \
+	return (((sb)->feature_ro_compat & \
+		BCH##_FEATURE_RO_COMPAT_##flagname) != 0); \
+} \
+static inline void bch_set_feature_##name(struct cache_sb *sb) \
+{ \
+	(sb)->feature_ro_compat |= \
+		BCH##_FEATURE_RO_COMPAT_##flagname; \
+} \
+static inline void bch_clear_feature_##name(struct cache_sb *sb) \
+{ \
+	(sb)->feature_ro_compat &= \
+		~BCH##_FEATURE_RO_COMPAT_##flagname; \
+}
+
+#define BCH_FEATURE_INCOMPAT_FUNCS(name, flagname) \
+static inline int bch_has_feature_##name(struct cache_sb *sb) \
+{ \
+	return (((sb)->feature_incompat & \
+		BCH##_FEATURE_INCOMPAT_##flagname) != 0); \
+} \
+static inline void bch_set_feature_##name(struct cache_sb *sb) \
+{ \
+	(sb)->feature_incompat |= \
+		BCH##_FEATURE_INCOMPAT_##flagname; \
+} \
+static inline void bch_clear_feature_##name(struct cache_sb *sb) \
+{ \
+	(sb)->feature_incompat &= \
+		~BCH##_FEATURE_INCOMPAT_##flagname; \
+}
+
+#endif
drivers/md/bcache/super.c +29 -3
index d5ed8f31e123..62534f44c6dc 100644
@@ -13,6 +13,7 @@
 #include "extents.h"
 #include "request.h"
 #include "writeback.h"
+#include "features.h"
 
 #include <linux/blkdev.h>
 #include <linux/debugfs.h>
@@ -194,6 +195,7 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 		sb->data_offset	= BDEV_DATA_START_DEFAULT;
 		break;
 	case BCACHE_SB_VERSION_BDEV_WITH_OFFSET:
+	case BCACHE_SB_VERSION_BDEV_WITH_FEATURES:
 		sb->data_offset	= le64_to_cpu(s->data_offset);
 
 		err = "Bad data offset";
@@ -207,6 +209,14 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 		if (err)
 			goto err;
 		break;
+	case BCACHE_SB_VERSION_CDEV_WITH_FEATURES:
+		err = read_super_common(sb, bdev, s);
+		if (err)
+			goto err;
+		sb->feature_compat = le64_to_cpu(s->feature_compat);
+		sb->feature_incompat = le64_to_cpu(s->feature_incompat);
+		sb->feature_ro_compat = le64_to_cpu(s->feature_ro_compat);
+		break;
 	default:
 		err = "Unsupported superblock version";
 		goto err;
@@ -241,7 +251,6 @@ static void __write_super(struct cache_sb *sb, struct cache_sb_disk *out,
 			offset_in_page(out));
 
 	out->offset		= cpu_to_le64(sb->offset);
-	out->version		= cpu_to_le64(sb->version);
 
 	memcpy(out->uuid,	sb->uuid, 16);
 	memcpy(out->set_uuid,	sb->set_uuid, 16);
@@ -257,6 +266,13 @@ static void __write_super(struct cache_sb *sb, struct cache_sb_disk *out,
 	for (i = 0; i < sb->keys; i++)
 		out->d[i] = cpu_to_le64(sb->d[i]);
 
+	if (sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES) {
+		out->feature_compat    = cpu_to_le64(sb->feature_compat);
+		out->feature_incompat  = cpu_to_le64(sb->feature_incompat);
+		out->feature_ro_compat = cpu_to_le64(sb->feature_ro_compat);
+	}
+
+	out->version		= cpu_to_le64(sb->version);
 	out->csum = csum_set(out);
 
 	pr_debug("ver %llu, flags %llu, seq %llu\n",
@@ -313,17 +329,20 @@ void bcache_write_super(struct cache_set *c)
 {
 	struct closure *cl = &c->sb_write;
 	struct cache *ca;
-	unsigned int i;
+	unsigned int i, version = BCACHE_SB_VERSION_CDEV_WITH_UUID;
 
 	down(&c->sb_write_mutex);
 	closure_init(cl, &c->cl);
 
 	c->sb.seq++;
 
+	if (c->sb.version > version)
+		version = c->sb.version;
+
 	for_each_cache(ca, c, i) {
 		struct bio *bio = &ca->sb_bio;
 
-		ca->sb.version		= BCACHE_SB_VERSION_CDEV_WITH_UUID;
+		ca->sb.version		= version;
 		ca->sb.seq		= c->sb.seq;
 		ca->sb.last_mount	= c->sb.last_mount;
 
@@ -1831,6 +1850,13 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	c->sb.bucket_size	= sb->bucket_size;
 	c->sb.nr_in_set		= sb->nr_in_set;
 	c->sb.last_mount	= sb->last_mount;
+	c->sb.version		= sb->version;
+	if (c->sb.version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES) {
+		c->sb.feature_compat = sb->feature_compat;
+		c->sb.feature_ro_compat = sb->feature_ro_compat;
+		c->sb.feature_incompat = sb->feature_incompat;
+	}
+
 	c->bucket_bits		= ilog2(sb->bucket_size);
 	c->block_bits		= ilog2(sb->block_size);
 	c->nr_uuids		= bucket_bytes(c) / sizeof(struct uuid_entry);
include/uapi/linux/bcache.h +21 -8
index 9a1965c6c3d0..47df2db2e727 100644
@@ -141,11 +141,13 @@ static inline struct bkey *bkey_idx(const struct bkey *k, unsigned int nr_keys)
  * Version 3: Cache device with new UUID format
  * Version 4: Backing device with data offset
  */
-#define BCACHE_SB_VERSION_CDEV		0
-#define BCACHE_SB_VERSION_BDEV		1
-#define BCACHE_SB_VERSION_CDEV_WITH_UUID 3
-#define BCACHE_SB_VERSION_BDEV_WITH_OFFSET 4
-#define BCACHE_SB_MAX_VERSION		4
+#define BCACHE_SB_VERSION_CDEV			0
+#define BCACHE_SB_VERSION_BDEV			1
+#define BCACHE_SB_VERSION_CDEV_WITH_UUID	3
+#define BCACHE_SB_VERSION_BDEV_WITH_OFFSET	4
+#define BCACHE_SB_VERSION_CDEV_WITH_FEATURES	5
+#define BCACHE_SB_VERSION_BDEV_WITH_FEATURES	6
+#define BCACHE_SB_MAX_VERSION			6
 
 #define SB_SECTOR			8
 #define SB_OFFSET			(SB_SECTOR << SECTOR_SHIFT)
@@ -173,7 +175,12 @@ struct cache_sb_disk {
 
 	__le64			flags;
 	__le64			seq;
-	__le64			pad[8];
+
+	__le64			feature_compat;
+	__le64			feature_incompat;
+	__le64			feature_ro_compat;
+
+	__le64			pad[5];
 
 	union {
 	struct {
@@ -224,7 +231,12 @@ struct cache_sb {
 
 	__u64			flags;
 	__u64			seq;
-	__u64			pad[8];
+
+	__u64			feature_compat;
+	__u64			feature_incompat;
+	__u64			feature_ro_compat;
+
+	__u64			pad[5];
 
 	union {
 	struct {
@@ -262,7 +274,8 @@ struct cache_sb {
 static inline _Bool SB_IS_BDEV(const struct cache_sb *sb)
 {
 	return sb->version == BCACHE_SB_VERSION_BDEV
-		|| sb->version == BCACHE_SB_VERSION_BDEV_WITH_OFFSET;
+		|| sb->version == BCACHE_SB_VERSION_BDEV_WITH_OFFSET
+		|| sb->version == BCACHE_SB_VERSION_BDEV_WITH_FEATURES;
 }
 
 BITMASK(CACHE_SYNC,			struct cache_sb, flags, 0, 1);
Signature · 1 line
2.26.2
author
#6 lore raw

PATCH v4 6/16 bcache: move bucket related code into read_super_common()

In reply to Coly Li

Setting sb->first_bucket and checking sb->keys indeed are only for cache device, it does not make sense to do them in read_super() for backing device too.

This patch moves the related code piece into read_super_common() explicitly for cache device and avoid the confusion.

---
 drivers/md/bcache/super.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/md/bcache/super.c +5 -5
index 62534f44c6dc..214d50903375 100644
@@ -66,12 +66,17 @@ static const char *read_super_common(struct cache_sb *sb,  struct block_device *
 	const char *err;
 	unsigned int i;
 
+	sb->first_bucket= le16_to_cpu(s->first_bucket);
 	sb->nbuckets	= le64_to_cpu(s->nbuckets);
 	sb->bucket_size	= le16_to_cpu(s->bucket_size);
 
 	sb->nr_in_set	= le16_to_cpu(s->nr_in_set);
 	sb->nr_this_dev	= le16_to_cpu(s->nr_this_dev);
 
+	err = "Too many journal buckets";
+	if (sb->keys > SB_JOURNAL_BUCKETS)
+		goto err;
+
 	err = "Too many buckets";
 	if (sb->nbuckets > LONG_MAX)
 		goto err;
@@ -155,7 +160,6 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 	sb->flags		= le64_to_cpu(s->flags);
 	sb->seq			= le64_to_cpu(s->seq);
 	sb->last_mount		= le32_to_cpu(s->last_mount);
-	sb->first_bucket	= le16_to_cpu(s->first_bucket);
 	sb->keys		= le16_to_cpu(s->keys);
 
 	for (i = 0; i < SB_JOURNAL_BUCKETS; i++)
@@ -172,10 +176,6 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 	if (memcmp(sb->magic, bcache_magic, 16))
 		goto err;
 
-	err = "Too many journal buckets";
-	if (sb->keys > SB_JOURNAL_BUCKETS)
-		goto err;
-
 	err = "Bad checksum";
 	if (s->csum != csum_set(s))
 		goto err;
Signature · 1 line
2.26.2
author
#7 lore raw

PATCH v4 7/16 bcache: struct cache_sb is only for in-memory super block now

In reply to Coly Li

We have struct cache_sb_disk for on-disk super block already, it is unnecessary to keep the in-memory super block format exactly mapping to the on-disk struct layout.

This patch adds code comments to notice that struct cache_sb is not exactly mapping to cache_sb_disk, and removes the useless member csum and pad[5].

Although struct cache_sb does not belong to uapi, but there are still some on-disk format related macros reference it and it is unncessary to get rid of such dependency now. So struct cache_sb will continue to stay in include/uapi/linux/bache.h for now.

---
 include/uapi/linux/bcache.h | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
include/uapi/linux/bcache.h +6 -4
index 47df2db2e727..0ef984ea515a 100644
@@ -215,8 +215,13 @@ struct cache_sb_disk {
 	__le64			d[SB_JOURNAL_BUCKETS];	/* journal buckets */
 };
 
+/*
+ * This is for in-memory bcache super block.
+ * NOTE: cache_sb is NOT exactly mapping to cache_sb_disk, the member
+ *       size, ordering and even whole struct size may be different
+ *       from cache_sb_disk.
+ */
 struct cache_sb {
-	__u64			csum;
 	__u64			offset;	/* sector where this sb was written */
 	__u64			version;
 
@@ -236,8 +241,6 @@ struct cache_sb {
 	__u64			feature_incompat;
 	__u64			feature_ro_compat;
 
-	__u64			pad[5];
-
 	union {
 	struct {
 		/* Cache devices */
@@ -245,7 +248,6 @@ struct cache_sb {
 
 		__u16		block_size;	/* sectors */
 		__u16		bucket_size;	/* sectors */
-
 		__u16		nr_in_set;
 		__u16		nr_this_dev;
 	};
Signature · 1 line
2.26.2
author
#8 lore raw

PATCH v4 8/16 bcache: introduce meta_bucket_pages() related helper routines

In reply to Coly Li

Currently the in-memory meta data like c->uuids or c->disk_buckets are allocated by alloc_bucket_pages(). The macro alloc_bucket_pages() calls __get_free_pages() to allocated continuous pages with order indicated by ilog2(bucket_pages(c)),

 #define alloc_bucket_pages(gfp, c)                      \
     ((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c))))

The maximum order is defined as MAX_ORDER, the default value is 11 (and can be overwritten by CONFIG_FORCE_MAX_ZONEORDER). In bcache code the maximum bucket size width is 16bits, this is restricted both by KEY_SIZE size and bucket_size size from struct cache_sb_disk. The maximum 16bits width and power-of-2 value is (1<<15) in unit of sector (512byte). It means the maximum value of bucket size in bytes is (1<<24) bytes a.k.a 4096 pages.

When the bucket size is set to maximum permitted value, ilog2(4096) is 12, which exceeds the default maximum order __get_free_pages() can accepted, the failed pages allocation will fail cache set registration procedure and print a kernel oops message for the exceeded pages order.

This patch introduces meta_bucket_pages(), meta_bucket_bytes(), and alloc_bucket_pages() helper routines. meta_bucket_pages() indicates the maximum pages can be allocated to meta data bucket, meta_bucket_bytes() indicates the according maximum bytes, and alloc_bucket_pages() does the pages allocation for meta bucket. Because meta_bucket_pages() chooses the smaller value among the bucket size and MAX_ORDER_NR_PAGES, it still works when MAX_ORDER overwritten by CONFIG_FORCE_MAX_ZONEORDER.

Following patches will use these helper routines to decide maximum pages can be allocated for different meta data buckets. If the bucket size is larger than meta_bucket_bytes(), the bcache registration can continue to success, just the space more than meta_bucket_bytes() inside the bucket is wasted. Comparing bcache failed for large bucket size, wasting some space for meta data buckets is acceptable at this moment.

---
 drivers/md/bcache/bcache.h | 20 ++++++++++++++++++++
 drivers/md/bcache/super.c  |  3 +++
 2 files changed, 23 insertions(+)
drivers/md/bcache/bcache.h +20 -0
index 80e3c4813fb0..972f1aff0f70 100644
@@ -762,6 +762,26 @@ struct bbio {
 #define bucket_bytes(c)		((c)->sb.bucket_size << 9)
 #define block_bytes(c)		((c)->sb.block_size << 9)
 
+static inline unsigned int meta_bucket_pages(struct cache_sb *sb)
+{
+	unsigned int n, max_pages;
+
+	max_pages = min_t(unsigned int,
+			  __rounddown_pow_of_two(USHRT_MAX) / PAGE_SECTORS,
+			  MAX_ORDER_NR_PAGES);
+
+	n = sb->bucket_size / PAGE_SECTORS;
+	if (n > max_pages)
+		n = max_pages;
+
+	return n;
+}
+
+static inline unsigned int meta_bucket_bytes(struct cache_sb *sb)
+{
+	return meta_bucket_pages(sb) << PAGE_SHIFT;
+}
+
 #define prios_per_bucket(c)				\
 	((bucket_bytes(c) - sizeof(struct prio_set)) /	\
 	 sizeof(struct bucket_disk))
drivers/md/bcache/super.c +3 -0
index 214d50903375..d0bdbbc3ff5c 100644
@@ -1821,6 +1821,9 @@ void bch_cache_set_unregister(struct cache_set *c)
 #define alloc_bucket_pages(gfp, c)			\
 	((void *) __get_free_pages(__GFP_ZERO|__GFP_COMP|gfp, ilog2(bucket_pages(c))))
 
+#define alloc_meta_bucket_pages(gfp, sb)		\
+	((void *) __get_free_pages(__GFP_ZERO|__GFP_COMP|gfp, ilog2(meta_bucket_pages(sb))))
+
 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 {
 	int iter_size;
Signature · 1 line
2.26.2
author
#9 lore raw

PATCH v4 9/16 bcache: handle c->uuids properly for bucket size > 8MB

In reply to Coly Li

Bcache allocates a whole bucket to store c->uuids on cache device, and allocates continuous pages to store it in-memory. When the bucket size exceeds maximum allocable continuous pages, bch_cache_set_alloc() will fail and cache device registration will fail.

This patch allocates c->uuids by alloc_meta_bucket_pages(), and uses ilog2(meta_bucket_pages(c)) to indicate order of c->uuids pages when free it. When writing c->uuids to cache device, its size is decided by meta_bucket_pages(c) * PAGE_SECTORS. Now c->uuids is properly handled for bucket size > 8MB.

---
 drivers/md/bcache/super.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/md/bcache/super.c +6 -4
index d0bdbbc3ff5c..a19f1baa8664 100644
@@ -466,6 +466,7 @@ static int __uuid_write(struct cache_set *c)
 	BKEY_PADDED(key) k;
 	struct closure cl;
 	struct cache *ca;
+	unsigned int size;
 
 	closure_init_stack(&cl);
 	lockdep_assert_held(&bch_register_lock);
@@ -473,7 +474,8 @@ static int __uuid_write(struct cache_set *c)
 	if (bch_bucket_alloc_set(c, RESERVE_BTREE, &k.key, 1, true))
 		return 1;
 
-	SET_KEY_SIZE(&k.key, c->sb.bucket_size);
+	size =  meta_bucket_pages(&c->sb) * PAGE_SECTORS;
+	SET_KEY_SIZE(&k.key, size);
 	uuid_io(c, REQ_OP_WRITE, 0, &k.key, &cl);
 	closure_sync(&cl);
 
@@ -1656,7 +1658,7 @@ static void cache_set_free(struct closure *cl)
 		}
 
 	bch_bset_sort_state_free(&c->sort);
-	free_pages((unsigned long) c->uuids, ilog2(bucket_pages(c)));
+	free_pages((unsigned long) c->uuids, ilog2(meta_bucket_pages(&c->sb)));
 
 	if (c->moving_gc_wq)
 		destroy_workqueue(c->moving_gc_wq);
@@ -1862,7 +1864,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 
 	c->bucket_bits		= ilog2(sb->bucket_size);
 	c->block_bits		= ilog2(sb->block_size);
-	c->nr_uuids		= bucket_bytes(c) / sizeof(struct uuid_entry);
+	c->nr_uuids		= meta_bucket_bytes(&c->sb) / sizeof(struct uuid_entry);
 	c->devices_max_used	= 0;
 	atomic_set(&c->attached_dev_nr, 0);
 	c->btree_pages		= bucket_pages(c);
@@ -1913,7 +1915,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 			BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER))
 		goto err;
 
-	c->uuids = alloc_bucket_pages(GFP_KERNEL, c);
+	c->uuids = alloc_meta_bucket_pages(GFP_KERNEL, &c->sb);
 	if (!c->uuids)
 		goto err;
 
Signature · 1 line
2.26.2
author
#10 lore raw

PATCH v4 10/16 bcache: handle cache prio_buckets and disk_buckets properly for bucket size > 8MB

In reply to Coly Li

Similar to c->uuids, struct cache's prio_buckets and disk_buckets also have the potential memory allocation failure during cache registration if the bucket size > 8MB.

ca->prio_buckets can be stored on cache device in multiple buckets, its in-memory space is allocated by kzalloc() interface but normally allocated by alloc_pages() because the size > KMALLOC_MAX_CACHE_SIZE.

So allocation of ca->prio_buckets has the MAX_ORDER restriction too. If the bucket size > 8MB, by default the page allocator will fail because the page order > 11 (default MAX_ORDER value). ca->prio_buckets should also use meta_bucket_bytes(), meta_bucket_pages() to decide its memory size and use alloc_meta_bucket_pages() to allocate pages, to avoid the allocation failure during cache set registration when bucket size > 8MB.

ca->disk_buckets is a single bucket size memory buffer, it is used to iterate each bucket of ca->prio_buckets, and compose the bio based on memory of ca->disk_buckets, then write ca->disk_buckets memory to cache disk one-by-one for each bucket of ca->prio_buckets. ca->disk_buckets should have in-memory size exact to the meta_bucket_pages(), this is the size that ca->prio_buckets will be stored into each on-disk bucket.

This patch fixes the above issues and handle cache's prio_buckets and disk_buckets properly for bucket size larger than 8MB.

---
 drivers/md/bcache/bcache.h |  9 +++++----
 drivers/md/bcache/super.c  | 10 +++++-----
 2 files changed, 10 insertions(+), 9 deletions(-)
drivers/md/bcache/bcache.h +5 -4
index 972f1aff0f70..0ebfda284866 100644
@@ -782,11 +782,12 @@ static inline unsigned int meta_bucket_bytes(struct cache_sb *sb)
 	return meta_bucket_pages(sb) << PAGE_SHIFT;
 }
 
-#define prios_per_bucket(c)				\
-	((bucket_bytes(c) - sizeof(struct prio_set)) /	\
+#define prios_per_bucket(ca)						\
+	((meta_bucket_bytes(&(ca)->sb) - sizeof(struct prio_set)) /	\
 	 sizeof(struct bucket_disk))
-#define prio_buckets(c)					\
-	DIV_ROUND_UP((size_t) (c)->sb.nbuckets, prios_per_bucket(c))
+
+#define prio_buckets(ca)						\
+	DIV_ROUND_UP((size_t) (ca)->sb.nbuckets, prios_per_bucket(ca))
 
 static inline size_t sector_to_bucket(struct cache_set *c, sector_t s)
 {
drivers/md/bcache/super.c +5 -5
index a19f1baa8664..1c4a4c3557f7 100644
@@ -563,7 +563,7 @@ static void prio_io(struct cache *ca, uint64_t bucket, int op,
 
 	bio->bi_iter.bi_sector	= bucket * ca->sb.bucket_size;
 	bio_set_dev(bio, ca->bdev);
-	bio->bi_iter.bi_size	= bucket_bytes(ca);
+	bio->bi_iter.bi_size	= meta_bucket_bytes(&ca->sb);
 
 	bio->bi_end_io	= prio_endio;
 	bio->bi_private = ca;
@@ -621,7 +621,7 @@ int bch_prio_write(struct cache *ca, bool wait)
 
 		p->next_bucket	= ca->prio_buckets[i + 1];
 		p->magic	= pset_magic(&ca->sb);
-		p->csum		= bch_crc64(&p->magic, bucket_bytes(ca) - 8);
+		p->csum		= bch_crc64(&p->magic, meta_bucket_bytes(&ca->sb) - 8);
 
 		bucket = bch_bucket_alloc(ca, RESERVE_PRIO, wait);
 		BUG_ON(bucket == -1);
@@ -674,7 +674,7 @@ static int prio_read(struct cache *ca, uint64_t bucket)
 			prio_io(ca, bucket, REQ_OP_READ, 0);
 
 			if (p->csum !=
-			    bch_crc64(&p->magic, bucket_bytes(ca) - 8)) {
+			    bch_crc64(&p->magic, meta_bucket_bytes(&ca->sb) - 8)) {
 				pr_warn("bad csum reading priorities\n");
 				goto out;
 			}
@@ -2222,7 +2222,7 @@ void bch_cache_release(struct kobject *kobj)
 		ca->set->cache[ca->sb.nr_this_dev] = NULL;
 	}
 
-	free_pages((unsigned long) ca->disk_buckets, ilog2(bucket_pages(ca)));
+	free_pages((unsigned long) ca->disk_buckets, ilog2(meta_bucket_pages(&ca->sb)));
 	kfree(ca->prio_buckets);
 	vfree(ca->buckets);
 
@@ -2319,7 +2319,7 @@ static int cache_alloc(struct cache *ca)
 		goto err_prio_buckets_alloc;
 	}
 
-	ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca);
+	ca->disk_buckets = alloc_meta_bucket_pages(GFP_KERNEL, &ca->sb);
 	if (!ca->disk_buckets) {
 		err = "ca->disk_buckets alloc failed";
 		goto err_disk_buckets_alloc;
Signature · 1 line
2.26.2
author
#11 lore raw

PATCH v4 11/16 bcache: handle cache set verify_ondisk properly for bucket size > 8MB

In reply to Coly Li

In bch_btree_cache_alloc() when CONFIG_BCACHE_DEBUG is configured, allocate memory for c->verify_ondisk may fail if the bucket size > 8MB, which will require __get_free_pages() to allocate continuous pages with order > 11 (the default MAX_ORDER of Linux buddy allocator). Such over size allocation will fail, and cause 2 problems,
- When CONFIG_BCACHE_DEBUG is configured, bch_btree_verify() does not work, because c->verify_ondisk is NULL and bch_btree_verify() returns immediately.
- bch_btree_cache_alloc() will fail due to c->verify_ondisk allocation failed, then the whole cache device registration fails. And because of this failure, the first problem of bch_btree_verify() has no chance to be triggered.

This patch fixes the above problem by two means,
1) If pages allocation of c->verify_ondisk fails, set it to NULL and returns bch_btree_cache_alloc() with -ENOMEM.
2) When calling __get_free_pages() to allocate c->verify_ondisk pages, use ilog2(meta_bucket_pages(&c->sb)) to make sure ilog2() will always generate a pages order <= MAX_ORDER (or CONFIG_FORCE_MAX_ZONEORDER). Then the buddy system won't directly reject the allocation request.

---
 drivers/md/bcache/btree.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/md/bcache/btree.c +10 -2
index dd116c83de80..79716ac9fb5d 100644
@@ -738,7 +738,7 @@ void bch_btree_cache_free(struct cache_set *c)
 	if (c->verify_data)
 		list_move(&c->verify_data->list, &c->btree_cache);
 
-	free_pages((unsigned long) c->verify_ondisk, ilog2(bucket_pages(c)));
+	free_pages((unsigned long) c->verify_ondisk, ilog2(meta_bucket_pages(&c->sb)));
 #endif
 
 	list_splice(&c->btree_cache_freeable,
@@ -785,7 +785,15 @@ int bch_btree_cache_alloc(struct cache_set *c)
 	mutex_init(&c->verify_lock);
 
 	c->verify_ondisk = (void *)
-		__get_free_pages(GFP_KERNEL|__GFP_COMP, ilog2(bucket_pages(c)));
+		__get_free_pages(GFP_KERNEL|__GFP_COMP, ilog2(meta_bucket_pages(&c->sb)));
+	if (!c->verify_ondisk) {
+		/*
+		 * Don't worry about the mca_rereserve buckets
+		 * allocated in previous for-loop, they will be
+		 * handled properly in bch_cache_set_unregister().
+		 */
+		return -ENOMEM;
+	}
 
 	c->verify_data = mca_bucket_alloc(c, &ZERO_KEY, GFP_KERNEL);
 
Signature · 1 line
2.26.2
author
#12 lore raw

PATCH v4 12/16 bcache: handle btree node memory allocation properly for bucket size > 8MB

In reply to Coly Li

Currently the bcache internal btree node occupies a whole bucket. When loading the btree node from cache device into memory, mca_data_alloc() will call bch_btree_keys_alloc() to allocate memory for the whole bucket size, ilog2(b->c->btree_pages) is send to bch_btree_keys_alloc() as the parameter 'page_order'.

c->btree_pages is set as bucket_pages() in bch_cache_set_alloc(), for bucket size > 8MB, ilog2(b->c->btree_pages) is 12 for 4KB page size. By default the maximum page order __get_free_pages() accepts is MAX_ORDER (11), in this condition bch_btree_keys_alloc() will always fail.

Because of other over-page-order allocation failure fails the cache device registration, such btree node allocation failure wasn't observed during runtime. After other blocking page allocation failures for bucket size > 8MB, this btree node allocation issue may trigger potentical risk e.g. infinite dead-loop to retry btree node allocation after failure.

This patch fixes the potential problem by setting c->btree_pages to meta_bucket_pages() in bch_cache_set_alloc(). In the condition that bucket size > 8MB, meta_bucket_pages() will always return a number which won't exceed the maximum page order of the buddy allocator.

---
 drivers/md/bcache/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/bcache/super.c +1 -1
index 1c4a4c3557f7..172246ff5ec2 100644
@@ -1867,7 +1867,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	c->nr_uuids		= meta_bucket_bytes(&c->sb) / sizeof(struct uuid_entry);
 	c->devices_max_used	= 0;
 	atomic_set(&c->attached_dev_nr, 0);
-	c->btree_pages		= bucket_pages(c);
+	c->btree_pages		= meta_bucket_pages(&c->sb);
 	if (c->btree_pages > BTREE_MAX_PAGES)
 		c->btree_pages = max_t(int, c->btree_pages / 4,
 				       BTREE_MAX_PAGES);
Signature · 1 line
2.26.2
author
#13 lore raw

PATCH v4 13/16 bcache: add bucket_size_hi into struct cache_sb_disk for large bucket

In reply to Coly Li

The large bucket feature is to extend bucket_size from 16bit to 32bit.

When create cache device on zoned device (e.g. zoned NVMe SSD), making a single bucket cover one or more zones of the zoned device is the simplest way to support zoned device as cache by bcache.

But current maximum bucket size is 16MB and a typical zone size of zoned device is 256MB, this is the major motiviation to extend bucket size to a larger bit width.

This patch is the basic and first change to support large bucket size, the major changes it makes are,
- Add BCH_FEATURE_INCOMPAT_LARGE_BUCKET for the large bucket feature, INCOMPAT means it introduces incompatible on-disk format change.
- Add BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET) routines.
- Adds __le32 bucket_size_hi into struct cache_sb_disk at offset 0x8d0 for the on-disk super block format.
- For the in-memory super block struct cache_sb, member bucket_size is extended from __u16 to __32.
- Add get_bucket_size() to combine the bucket_size and bucket_size_hi from struct cache_sb_disk into an unsigned int value.

Since we already have large bucket size helpers meta_bucket_pages(), meta_bucket_bytes() and alloc_meta_bucket_pages(), they make sure when bucket size > 8MB, the memory allocation for bcache meta data bucket won't fail no matter how large the bucket size extended. So these meta data buckets are handled properly when the bucket size width increase from 16bit to 32bit, we don't need to worry about them.

---
Changlog:
v2: change cache_sb_disk->bucket_size_hi from 32bit to 16bit to avoid
integer overflow in get_bucket_size()
v1: initial version.

 drivers/md/bcache/alloc.c    |  2 +-
 drivers/md/bcache/features.c | 22 ++++++++++++++++++++++
 drivers/md/bcache/features.h |  9 ++++++---
 drivers/md/bcache/movinggc.c |  4 ++--
 drivers/md/bcache/super.c    | 23 +++++++++++++++++++----
 include/uapi/linux/bcache.h  |  3 ++-
 6 files changed, 52 insertions(+), 11 deletions(-)
 create mode 100644 drivers/md/bcache/features.c
drivers/md/bcache/alloc.c +1 -1
index a1df0d95151c..52035a78d836 100644
@@ -87,7 +87,7 @@ void bch_rescale_priorities(struct cache_set *c, int sectors)
 {
 	struct cache *ca;
 	struct bucket *b;
-	unsigned int next = c->nbuckets * c->sb.bucket_size / 1024;
+	unsigned long next = c->nbuckets * c->sb.bucket_size / 1024;
 	unsigned int i;
 	int r;
 
drivers/md/bcache/features.c new file +22 -0
new file mode 100644
index 000000000000..ba53944bb390
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Feature set bits and string conversion.
+ * Inspired by ext4's features compat/incompat/ro_compat related code.
+ *
+ * Copyright 2020 Coly Li <[email protected]>
+ *
+ */
+#include <linux/bcache.h>
+#include "bcache.h"
+
+struct feature {
+	int		compat;
+	unsigned int	mask;
+	const char	*string;
+};
+
+static struct feature feature_list[] = {
+	{BCH_FEATURE_INCOMPAT, BCH_FEATURE_INCOMPAT_LARGE_BUCKET,
+		"large_bucket"},
+	{0, 0, 0 },
+};
drivers/md/bcache/features.h +6 -3
index ae7df37b9862..dca052cf5203 100644
@@ -11,9 +11,13 @@
 #define BCH_FEATURE_INCOMPAT		2
 #define BCH_FEATURE_TYPE_MASK		0x03
 
+/* Feature set definition */
+/* Incompat feature set */
+#define BCH_FEATURE_INCOMPAT_LARGE_BUCKET	0x0001 /* 32bit bucket size */
+
 #define BCH_FEATURE_COMPAT_SUUP		0
 #define BCH_FEATURE_RO_COMPAT_SUUP	0
-#define BCH_FEATURE_INCOMPAT_SUUP	0
+#define BCH_FEATURE_INCOMPAT_SUUP	BCH_FEATURE_INCOMPAT_LARGE_BUCKET
 
 #define BCH_HAS_COMPAT_FEATURE(sb, mask) \
 		((sb)->feature_compat & (mask))
@@ -22,8 +26,6 @@
 #define BCH_HAS_INCOMPAT_FEATURE(sb, mask) \
 		((sb)->feature_incompat & (mask))
 
-/* Feature set definition */
-
 #define BCH_FEATURE_COMPAT_FUNCS(name, flagname) \
 static inline int bch_has_feature_##name(struct cache_sb *sb) \
 { \
@@ -75,4 +77,5 @@ static inline void bch_clear_feature_##name(struct cache_sb *sb) \
 		~BCH##_FEATURE_INCOMPAT_##flagname; \
 }
 
+BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET);
 #endif
drivers/md/bcache/movinggc.c +2 -2
index b7dd2d75f58c..5872d6470470 100644
@@ -206,8 +206,8 @@ void bch_moving_gc(struct cache_set *c)
 	mutex_lock(&c->bucket_lock);
 
 	for_each_cache(ca, c, i) {
-		unsigned int sectors_to_move = 0;
-		unsigned int reserve_sectors = ca->sb.bucket_size *
+		unsigned long sectors_to_move = 0;
+		unsigned long reserve_sectors = ca->sb.bucket_size *
 			     fifo_used(&ca->free[RESERVE_MOVINGGC]);
 
 		ca->heap.used = 0;
drivers/md/bcache/super.c +19 -4
index 172246ff5ec2..b7ef11da026c 100644
@@ -60,6 +60,17 @@ struct workqueue_struct *bch_journal_wq;
 
 /* Superblock */
 
+static unsigned int get_bucket_size(struct cache_sb *sb, struct cache_sb_disk *s)
+{
+	unsigned int bucket_size = le16_to_cpu(s->bucket_size);
+
+	if (sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES &&
+	     bch_has_feature_large_bucket(sb))
+		bucket_size |= le16_to_cpu(s->bucket_size_hi) << 16;
+
+	return bucket_size;
+}
+
 static const char *read_super_common(struct cache_sb *sb,  struct block_device *bdev,
 				     struct cache_sb_disk *s)
 {
@@ -68,7 +79,7 @@ static const char *read_super_common(struct cache_sb *sb,  struct block_device *
 
 	sb->first_bucket= le16_to_cpu(s->first_bucket);
 	sb->nbuckets	= le64_to_cpu(s->nbuckets);
-	sb->bucket_size	= le16_to_cpu(s->bucket_size);
+	sb->bucket_size	= get_bucket_size(sb, s);
 
 	sb->nr_in_set	= le16_to_cpu(s->nr_in_set);
 	sb->nr_this_dev	= le16_to_cpu(s->nr_this_dev);
@@ -210,12 +221,16 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 			goto err;
 		break;
 	case BCACHE_SB_VERSION_CDEV_WITH_FEATURES:
-		err = read_super_common(sb, bdev, s);
-		if (err)
-			goto err;
+		/*
+		 * Feature bits are needed in read_super_common(),
+		 * convert them firstly.
+		 */
 		sb->feature_compat = le64_to_cpu(s->feature_compat);
 		sb->feature_incompat = le64_to_cpu(s->feature_incompat);
 		sb->feature_ro_compat = le64_to_cpu(s->feature_ro_compat);
+		err = read_super_common(sb, bdev, s);
+		if (err)
+			goto err;
 		break;
 	default:
 		err = "Unsupported superblock version";
include/uapi/linux/bcache.h +2 -1
index 0ef984ea515a..52e8bcb33981 100644
@@ -213,6 +213,7 @@ struct cache_sb_disk {
 		__le16		keys;
 	};
 	__le64			d[SB_JOURNAL_BUCKETS];	/* journal buckets */
+	__le16			bucket_size_hi;
 };
 
 /*
@@ -247,9 +248,9 @@ struct cache_sb {
 		__u64		nbuckets;	/* device size */
 
 		__u16		block_size;	/* sectors */
-		__u16		bucket_size;	/* sectors */
 		__u16		nr_in_set;
 		__u16		nr_this_dev;
+		__u32		bucket_size;	/* sectors */
 	};
 	struct {
 		/* Backing devices */
Signature · 1 line
2.26.2
author
#14 lore raw

PATCH v4 14/16 bcache: add sysfs file to display feature sets information of cache set

In reply to Coly Li

The following three sysfs files are created to display according feature set information of bcache:
/sys/fs/bcache/<cache set UUID>/internal/feature_compat /sys/fs/bcache/<cache set UUID>/internal/feature_ro_compat /sys/fs/bcache/<cache set UUID>/internal/feature_incompat
is added by this patch, to display feature sets information of the cache set.

Now only an incompat feature 'large_bucket' added in bcache, the sysfs file content is:
[large_bucket]
string large_bucket means the running bcache drive supports incompat feature 'large_bucket', the wrapping [] means the 'large_bucket' feature is currently enabled on this cache set.

This patch is ready to display compat and ro_compat features, in future once bcache code implements such feature sets, the according feature strings will be displayed in their sysfs files too.

---
Changlog:
v2: create single sysfs file for each feature set, suggested by Hannes.
v1: initial version.

 drivers/md/bcache/Makefile   |  2 +-
 drivers/md/bcache/features.c | 53 ++++++++++++++++++++++++++++++++++++
 drivers/md/bcache/features.h |  5 ++++
 drivers/md/bcache/sysfs.c    | 14 ++++++++++
 4 files changed, 73 insertions(+), 1 deletion(-)
drivers/md/bcache/Makefile +1 -1
index fd714628da6a..5b87e59676b8 100644
@@ -4,4 +4,4 @@ obj-$(CONFIG_BCACHE)	+= bcache.o
 
 bcache-y		:= alloc.o bset.o btree.o closure.o debug.o extents.o\
 	io.o journal.o movinggc.o request.o stats.o super.o sysfs.o trace.o\
-	util.o writeback.o
+	util.o writeback.o features.o
drivers/md/bcache/features.c +53 -0

62 lines not on this page · raw message

drivers/md/bcache/features.h +5 -0
index dca052cf5203..a1653c478041 100644
@@ -78,4 +78,9 @@ static inline void bch_clear_feature_##name(struct cache_sb *sb) \
 }
 
 BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET);
+
+int bch_print_cache_set_feature_compat(struct cache_set *c, char *buf, int size);
+int bch_print_cache_set_feature_ro_compat(struct cache_set *c, char *buf, int size);
+int bch_print_cache_set_feature_incompat(struct cache_set *c, char *buf, int size);
+
 #endif
drivers/md/bcache/sysfs.c +14 -0
index 0dadec5a78f6..ac06c0bc3c0a 100644
@@ -11,6 +11,7 @@
 #include "btree.h"
 #include "request.h"
 #include "writeback.h"
+#include "features.h"
 
 #include <linux/blkdev.h>
 #include <linux/sort.h>
@@ -88,6 +89,9 @@ read_attribute(btree_used_percent);
 read_attribute(average_key_size);
 read_attribute(dirty_data);
 read_attribute(bset_tree_stats);
+read_attribute(feature_compat);
+read_attribute(feature_ro_compat);
+read_attribute(feature_incompat);
 
 read_attribute(state);
 read_attribute(cache_read_races);
@@ -779,6 +783,13 @@ SHOW(__bch_cache_set)
 	if (attr == &sysfs_bset_tree_stats)
 		return bch_bset_print_stats(c, buf);
 
+	if (attr == &sysfs_feature_compat)
+		return bch_print_cache_set_feature_compat(c, buf, PAGE_SIZE);
+	if (attr == &sysfs_feature_ro_compat)
+		return bch_print_cache_set_feature_ro_compat(c, buf, PAGE_SIZE);
+	if (attr == &sysfs_feature_incompat)
+		return bch_print_cache_set_feature_incompat(c, buf, PAGE_SIZE);
+
 	return 0;
 }
 SHOW_LOCKED(bch_cache_set)
@@ -987,6 +998,9 @@ static struct attribute *bch_cache_set_internal_files[] = {
 	&sysfs_io_disable,
 	&sysfs_cutoff_writeback,
 	&sysfs_cutoff_writeback_sync,
+	&sysfs_feature_compat,
+	&sysfs_feature_ro_compat,
+	&sysfs_feature_incompat,
 	NULL
 };
 KTYPE(bch_cache_set_internal);
Signature · 1 line
2.26.2
author
#15 lore raw

PATCH v4 15/16 bcache: avoid extra memory allocation from mempool c->fill_iter

In reply to Coly Li

Mempool c->fill_iter is used to allocate memory for struct btree_iter in bch_btree_node_read_done() to iterate all keys of a read-in btree node.

The allocation size is defined in bch_cache_set_alloc() by,
mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size))
where iter_size is defined by a calculation,
(sb->bucket_size / sb->block_size + 1) * sizeof(struct btree_iter_set)

For 16bit width bucket_size the calculation is OK, but now the bucket size is extended to 32bit, the bucket size can be 2GB. By the above calculation, iter_size can be 2048 pages (order 11 is still accepted by buddy allocator).

But the actual size holds the bkeys in meta data bucket is limited to meta_bucket_pages() already, which is 16MB. By the above calculation, if replace sb->bucket_size by meta_bucket_pages() * PAGE_SECTORS, the result is 16 pages. This is the size large enough for the mempool allocation to struct btree_iter.

Therefore in worst case every time mempool c->fill_iter allocates, at most 4080 pages are wasted and won't be used. Therefore this patch uses meta_bucket_pages() * PAGE_SECTORS to calculate the iter size in bch_cache_set_alloc(), to avoid extra memory allocation from mempool c->fill_iter.

---
 drivers/md/bcache/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/bcache/super.c +1 -1
index b7ef11da026c..d86b31722b41 100644
@@ -1908,7 +1908,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	INIT_LIST_HEAD(&c->btree_cache_freed);
 	INIT_LIST_HEAD(&c->data_buckets);
 
-	iter_size = (sb->bucket_size / sb->block_size + 1) *
+	iter_size = ((meta_bucket_pages(sb) * PAGE_SECTORS) / sb->block_size + 1) *
 		sizeof(struct btree_iter_set);
 
 	c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL);
Signature · 1 line
2.26.2
author
#16 lore raw

PATCH v4 16/16 bcache: avoid extra memory consumption in struct bbio for large bucket size

In reply to Coly Li

Bcache uses struct bbio to do I/Os for meta data pages like uuids, disk_buckets, prio_buckets, and btree nodes.

Example writing a btree node onto cache device, the process is,
- Allocate a struct bbio from mempool c->bio_meta.
- Inside struct bbio embedded a struct bio, initialize bi_inline_vecs for this embedded bio.
- Call bch_bio_map() to map each meta data page to each bv from the inlined bi_io_vec table.
- Call bch_submit_bbio() to submit the bio into underlying block layer.
- When the I/O completed, only release the struct bbio, don't touch the reference counter of the meta data pages.

The struct bbio is defined as,
738 struct bbio {
739 unsigned int submit_time_us;
[snipped]
748 struct bio bio;
749 };

Because struct bio is embedded at the end of struct bbio, therefore the actual size of struct bbio is sizeof(struct bio) + size of the embedded bio->bi_inline_vecs.

Now all the meta data bucket size are limited to meta_bucket_pages(), if the bucket size is large than meta_bucket_pages()*PAGE_SECTORS, rested space in the bucket is unused. Therefore the most used space in meta bucket is (1<<MAX_ORDER) pages, or (1<<CONFIG_FORCE_MAX_ZONEORDER) if it is configured.

Therefore for large bucket size, it is unnecessary to calculate the allocation size of mempool c->bio_meta as,
mempool_init_kmalloc_pool(&c->bio_meta, 2,
sizeof(struct bbio) + sizeof(struct bio_vec) * bucket_pages(c))
It is too large, neither the Linux buddy allocator cannot allocate so much continuous pages, nor the extra allocated pages are wasted.

This patch replace bucket_pages() to meta_bucket_pages() in two places,
- In bch_cache_set_alloc(), when initialize mempool c->bio_meta, uses sizeof(struct bbio) + sizeof(struct bio_vec) * bucket_pages(c) to set the allocating object size.
- In bch_bbio_alloc(), when calling bio_init() to set inline bvec talbe bi_inline_bvecs, uses meta_bucket_pages() to indicate number of the inline bio vencs number.

Now the maximum size of embedded bio inside struct bbio exactly matches the limit of meta_bucket_pages(), no extra page wasted.

---
 drivers/md/bcache/io.c    | 2 +-
 drivers/md/bcache/super.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/md/bcache/io.c +1 -1
index b25ee33b0d0b..a14a445618b4 100644
@@ -26,7 +26,7 @@ struct bio *bch_bbio_alloc(struct cache_set *c)
 	struct bbio *b = mempool_alloc(&c->bio_meta, GFP_NOIO);
 	struct bio *bio = &b->bio;
 
-	bio_init(bio, bio->bi_inline_vecs, bucket_pages(c));
+	bio_init(bio, bio->bi_inline_vecs, meta_bucket_pages(&c->sb));
 
 	return bio;
 }
drivers/md/bcache/super.c +1 -1
index d86b31722b41..5eba0b930e27 100644
@@ -1920,7 +1920,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 
 	if (mempool_init_kmalloc_pool(&c->bio_meta, 2,
 			sizeof(struct bbio) +
-			sizeof(struct bio_vec) * bucket_pages(c)))
+			sizeof(struct bio_vec) * meta_bucket_pages(&c->sb)))
 		goto err;
 
 	if (mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size))
Signature · 1 line
2.26.2