ipw2x00: Replace HTTP links with HTTPS ones
Subsystems (4)
PATCH 1/1 ipw2x00: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain \bxmlns\b:
For each link, \bhttp://[^# \t\r\n]*(?:\w|/):
If neither \bgnu\.org/license, nor \bmozilla\.org/MPL\b:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <[email protected]>' v5.7..master
If there are any URLs to be removed completely
or at least not (just) HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64
If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837
If you apply the patch, please let me know.
Documentation/networking/device_drivers/intel/ipw2100.rst | 2 +- drivers/net/wireless/intel/ipw2x00/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
Documentation/networking/device_drivers/intel/ipw2100.rst +1 -1
@@ -78,7 +78,7 @@ such, if you are interested in deploying or shipping a driver as part of solution intended to be used for purposes other than development, please obtain a tested driver from Intel Customer Support at: -http://www.intel.com/support/wireless/sb/CS-006408.htm +https://www.intel.com/support/wireless/sb/CS-006408.htm 1. Introduction ===============
drivers/net/wireless/intel/ipw2x00/Kconfig +2 -2
@@ -28,7 +28,7 @@ config IPW2100 You will also very likely need the Wireless Tools in order to configure your card: - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. It is recommended that you compile this driver as a module (M) rather than built-in (Y). This driver requires firmware at device
@@ -90,7 +90,7 @@ config IPW2200 You will also very likely need the Wireless Tools in order to configure your card: - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. It is recommended that you compile this driver as a module (M) rather than built-in (Y). This driver requires firmware at device
Signature · 1 line
2.27.0
Quoted 15 lines · Alexander A. Klimov
Rationale:
Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate.Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain\bxmlns\b:
For each link,\bhttp://[^# \t\r\n]*(?:\w|/):
If neither\bgnu\.org/license, nor\bmozilla\.org/MPL\b:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Quoted 1 line
Signed-off-by Alexander A. Klimov <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
348cb5dc4d70 ipw2x00: Replace HTTP links with HTTPS ones
Signature · 3 lines
https://patchwork.kernel.org/patch/11671879/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches