Skip to contentSkip to conversation

ipw2x00: Replace HTTP links with HTTPS ones

PATCH In review Alexander A. Klimov 2 participants 2 messages Jul 18, 2020 – Aug 2, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ipw2x00: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain \bxmlns\b:
For each link, \bhttp://[^# \t\r\n]*(?:\w|/):
If neither \bgnu\.org/license, nor \bmozilla\.org/MPL\b:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <[email protected]>' v5.7..master

If there are any URLs to be removed completely
or at least not (just) HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64

If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837

If you apply the patch, please let me know.

 Documentation/networking/device_drivers/intel/ipw2100.rst | 2 +-
 drivers/net/wireless/intel/ipw2x00/Kconfig                | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
Documentation/networking/device_drivers/intel/ipw2100.rst +1 -1
index d54ad522f937..883e96355799 100644
@@ -78,7 +78,7 @@ such, if you are interested in deploying or shipping a driver as part of
 solution intended to be used for purposes other than development, please
 obtain a tested driver from Intel Customer Support at:
 
-http://www.intel.com/support/wireless/sb/CS-006408.htm
+https://www.intel.com/support/wireless/sb/CS-006408.htm
 
 1. Introduction
 ===============
drivers/net/wireless/intel/ipw2x00/Kconfig +2 -2
index d00386915a9d..f3e09b630d8b 100644
@@ -28,7 +28,7 @@ config IPW2100
 	  You will also very likely need the Wireless Tools in order to
 	  configure your card:
 
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
 	  It is recommended that you compile this driver as a module (M)
 	  rather than built-in (Y). This driver requires firmware at device
@@ -90,7 +90,7 @@ config IPW2200
 	  You will also very likely need the Wireless Tools in order to
 	  configure your card:
 
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
 	  It is recommended that you compile this driver as a module (M)
 	  rather than built-in (Y). This driver requires firmware at device
Signature · 1 line
2.27.0
#1 lore raw
Quoted 15 lines · Alexander A. Klimov

Rationale:
Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain \bxmlns\b:
For each link, \bhttp://[^# \t\r\n]*(?:\w|/):
If neither \bgnu\.org/license, nor \bmozilla\.org/MPL\b:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Quoted 1 line

Patch applied to wireless-drivers-next.git, thanks.

348cb5dc4d70 ipw2x00: Replace HTTP links with HTTPS ones

Signature · 3 lines
https://patchwork.kernel.org/patch/11671879/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches