Allow guest-get-fsinfo also for non-PCI devices
v2 cover Allow guest-get-fsinfo also for non-PCI devices
The information that can be retrieved via UDEV is also usable for non-PCI devices. So let's allow build_guest_fsinfo_for_real_device() on non-PCI devices, too. This is required to fix the bug that CCW devices show up without "Target" when running libvirt's "virsh domfsinfo" command (see
https://bugzilla.redhat.com/show_bug.cgi?id=1755075 for details).
v2:
- Use g_new0 instead of g_malloc0 (as suggested by Daniel)
- Init fields to -1 explicitely, not via memset (Daniel)
- Add the fourth patch to also fill in virtio information on s390x
Thomas Huth (4):
qga/qapi-schema: Document -1 for invalid PCI address fields qga/commands-posix: Rework build_guest_fsinfo_for_real_device()
function
qga/commands-posix: Move the udev code from the pci to the generic
function
qga/commands-posix: Support fsinfo for non-PCI virtio devices, too
qga/commands-posix.c | 157 ++++++++++++++++++++++++++++++------------- qga/qapi-schema.json | 2 +- 2 files changed, 110 insertions(+), 49 deletions(-)
Signature · 1 line
2.18.1
PATCH v2 1/4 qga/qapi-schema: Document -1 for invalid PCI address fields
The "guest-get-fsinfo" could also be used for non-PCI devices in the future. And the code in GuestPCIAddress() in qga/commands-win32.c seems to be using "-1" for fields that it can not determine already. Thus let's properly document "-1" as value for invalid PCI address fields.
--- qga/qapi-schema.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
qga/qapi-schema.json +1 -1
@@ -846,7 +846,7 @@ ## # @GuestDiskAddress: # -# @pci-controller: controller's PCI address +# @pci-controller: controller's PCI address (fields are set to -1 if invalid) # @bus-type: bus type # @bus: bus id # @target: target id
Signature · 1 line
2.18.1
PATCH v2 2/4 qga/commands-posix: Rework build_guest_fsinfo_for_real_device() function
In reply to Thomas HuthWe are going to support non-PCI devices soon. For this we need to split the generic GuestDiskAddress and GuestDiskAddressList memory allocation and list chaining into a separate function first.
--- qga/commands-posix.c | 65 ++++++++++++++++++++++++++++---------------- 1 file changed, 41 insertions(+), 24 deletions(-)
qga/commands-posix.c +41 -24
@@ -861,28 +861,30 @@ static int build_hosts(char const *syspath, char const *host, bool ata,return i; } -/* Store disk device info specified by @sysfs into @fs */ -static void build_guest_fsinfo_for_real_device (char const *syspath, -GuestFilesystemInfo *fs, -Error **errp) +/* +* Store disk device info for devices on the PCI bus. +* Returns true if information has been stored, or false for failure. +*/ +static bool build_guest_fsinfo_for_pci_dev (char const *syspath, +GuestDiskAddress *disk, +Error **errp) {unsigned int pci[4 ], host, hosts[8 ], tgt[3 ];int i, nhosts =0 , pcilen; -GuestDiskAddress *disk; -GuestPCIAddress *pciaddr; -GuestDiskAddressList *list =NULL ; +GuestPCIAddress *pciaddr = disk->pci_controller;bool has_ata = false, has_host = false, has_tgt = false;char *p, *q, *driver =NULL ;#ifdef CONFIG_LIBUDEV struct udev *udev =NULL ;struct udev_device *udevice =NULL ;#endif +bool ret = false; p =strstr (syspath,"/devices/pci" );if (!p ||sscanf (p +12 ,"%*x:%*x/%x:%x:%x.%x%n" , pci, pci +1 , pci +2 , pci +3 , &pcilen) <4 ) {g_debug ("only pci device is supported: sysfs path '%s'" , syspath); -return ; +return false; } p +=12 + pcilen;
@@ -903,7 +905,7 @@ static void build_guest_fsinfo_for_real_device(char const *syspath, }g_debug ("unsupported driver or sysfs path '%s'" , syspath); -return ; +return false; } p =strstr (syspath,"/target" );
@@ -929,18 +931,11 @@ static void build_guest_fsinfo_for_real_device(char const *syspath, } } - pciaddr =g_malloc0 (sizeof (*pciaddr)); pciaddr->domain = pci[0 ]; pciaddr->bus = pci[1 ]; pciaddr->slot = pci[2 ]; pciaddr->function = pci[3 ]; - disk =g_malloc0 (sizeof (*disk)); - disk->pci_controller = pciaddr; - - list =g_malloc0 (sizeof (*list)); - list->value = disk; -#ifdef CONFIG_LIBUDEV udev =udev_new (); udevice =udev_device_new_from_syspath (udev, syspath);
@@ -1018,21 +1013,43 @@ static void build_guest_fsinfo_for_real_device(char const *syspath, goto cleanup; } - list->next = fs->disk; - fs->disk = list; - goto out; + ret = true; cleanup: -if (list) { -qapi_free_GuestDiskAddressList (list); - } -out:g_free (driver);#ifdef CONFIG_LIBUDEV udev_unref (udev);udev_device_unref (udevice);#endif -return ; +return ret; +} + +/* Store disk device info specified by @sysfs into @fs */ +static void build_guest_fsinfo_for_real_device (char const *syspath, +GuestFilesystemInfo *fs, +Error **errp) +{ +GuestDiskAddress *disk; +GuestPCIAddress *pciaddr; +GuestDiskAddressList *list =NULL ; +bool has_hwinf; + + pciaddr =g_new0 (GuestPCIAddress,1 ); + + disk =g_new0 (GuestDiskAddress,1 ); + disk->pci_controller = pciaddr; + + list =g_new0 (GuestDiskAddressList,1 ); + list->value = disk; + + has_hwinf =build_guest_fsinfo_for_pci_dev (syspath, disk, errp); + +if (has_hwinf) { + list->next = fs->disk; + fs->disk = list; + }else { +qapi_free_GuestDiskAddressList (list); + } } static void build_guest_fsinfo_for_device(char const *devpath,
Signature · 1 line
2.18.1
Re: [PATCH v2 2/4] qga/commands-posix: Rework build_guest_fsinfo_for_real_device() function
Quoted 8 lines · Thomas Huth
We are going to support non-PCI devices soon. For this we need to split the generic GuestDiskAddress and GuestDiskAddressList memory allocation and list chaining into a separate function first.
Signed-off-by Thomas Huth <[email protected]>--- qga/commands-posix.c | 65 ++++++++++++++++++++++++++++---------------- 1 file changed, 41 insertions(+), 24 deletions(-)
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
PATCH v2 3/4 qga/commands-posix: Move the udev code from the pci to the generic function
In reply to Thomas HuthThe libudev-related code is independent from the other pci-related code and can be re-used for non-pci devices (like ccw devices on s390x). Thus move this part to the generic function.
--- qga/commands-posix.c | 62 +++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 29 deletions(-)
qga/commands-posix.c +33 -29
@@ -874,10 +874,6 @@ static bool build_guest_fsinfo_for_pci_dev(char const *syspath,GuestPCIAddress *pciaddr = disk->pci_controller;bool has_ata = false, has_host = false, has_tgt = false;char *p, *q, *driver =NULL ; -#ifdef CONFIG_LIBUDEV -struct udev *udev =NULL ; -struct udev_device *udevice =NULL ; -#endif bool ret = false; p =strstr (syspath,"/devices/pci" );
@@ -936,26 +932,6 @@ static bool build_guest_fsinfo_for_pci_dev(char const *syspath, pciaddr->slot = pci[2 ]; pciaddr->function = pci[3 ]; -#ifdef CONFIG_LIBUDEV - udev =udev_new (); - udevice =udev_device_new_from_syspath (udev, syspath); -if (udev ==NULL || udevice ==NULL ) { -g_debug ("failed to query udev" ); - }else { -const char *devnode, *serial; - devnode =udev_device_get_devnode (udevice); -if (devnode !=NULL ) { - disk->dev =g_strdup (devnode); - disk->has_dev = true; - } - serial =udev_device_get_property_value (udevice,"ID_SERIAL" ); -if (serial !=NULL && *serial !=0 ) { - disk->serial =g_strdup (serial); - disk->has_serial = true; - } - } -#endif -if (strcmp (driver,"ata_piix" ) ==0 ) {/* a host per ide bus, target*:0:<unit>:0 */ if (!has_host || !has_tgt) {
@@ -1017,10 +993,6 @@ static bool build_guest_fsinfo_for_pci_dev(char const *syspath, cleanup:g_free (driver); -#ifdef CONFIG_LIBUDEV -udev_unref (udev); -udev_device_unref (udevice); -#endif return ret; }
@@ -1033,18 +1005,50 @@ static void build_guest_fsinfo_for_real_device(char const *syspath,GuestPCIAddress *pciaddr;GuestDiskAddressList *list =NULL ;bool has_hwinf; +#ifdef CONFIG_LIBUDEV +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +#endif pciaddr =g_new0 (GuestPCIAddress,1 ); + pciaddr->domain =-1 ;/* -1 means field is invalid */ + pciaddr->bus =-1 ; + pciaddr->slot =-1 ; + pciaddr->function =-1 ; disk =g_new0 (GuestDiskAddress,1 ); disk->pci_controller = pciaddr; + disk->bus_type =GUEST_DISK_BUS_TYPE_UNKNOWN ; list =g_new0 (GuestDiskAddressList,1 ); list->value = disk; +#ifdef CONFIG_LIBUDEV + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { +const char *devnode, *serial; + devnode =udev_device_get_devnode (udevice); +if (devnode !=NULL ) { + disk->dev =g_strdup (devnode); + disk->has_dev = true; + } + serial =udev_device_get_property_value (udevice,"ID_SERIAL" ); +if (serial !=NULL && *serial !=0 ) { + disk->serial =g_strdup (serial); + disk->has_serial = true; + } + } + +udev_unref (udev); +udev_device_unref (udevice); +#endif + has_hwinf =build_guest_fsinfo_for_pci_dev (syspath, disk, errp); -if (has_hwinf) { +if (has_hwinf || disk->has_dev || disk->has_serial) { list->next = fs->disk; fs->disk = list; }else {
Signature · 1 line
2.18.1
Re: [PATCH v2 3/4] qga/commands-posix: Move the udev code from the pci to the generic function
Quoted 9 lines · Thomas Huth
The libudev-related code is independent from the other pci-related code and can be re-used for non-pci devices (like ccw devices on s390x). Thus move this part to the generic function.
Signed-off-by Thomas Huth <[email protected]>--- qga/commands-posix.c | 62 +++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 29 deletions(-)
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
PATCH v2 4/4 qga/commands-posix: Support fsinfo for non-PCI virtio devices, too
In reply to Thomas HuthQEMU on s390x uses virtio via channel I/O instead of PCI by default. Add a function to detect and provide information for virtio-scsi and virtio-block devices here, too.
--- qga/commands-posix.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-)
qga/commands-posix.c +41 -1
@@ -996,6 +996,39 @@ cleanup:return ret; } +/* +* Store disk device info for non-PCI virtio devices (for example s390x +* channel I/O devices). Returns true if information has been stored, or +* false for failure. +*/ +static bool build_guest_fsinfo_for_nonpci_virtio (char const *syspath, +GuestDiskAddress *disk, +Error **errp) +{ +unsigned int tgt[3 ]; +char *p; + +if (!strstr (syspath,"/virtio" ) || !strstr (syspath,"/block" )) { +g_debug ("Unsupported virtio device '%s'" , syspath); +return false; + } + + p =strstr (syspath,"/target" ); +if (p &&sscanf (p +7 ,"%*u:%*u:%*u/%*u:%u:%u:%u" , + &tgt[0 ], &tgt[1 ], &tgt[2 ]) ==3 ) { +/* virtio-scsi: target*:0:<target>:<unit> */ + disk->bus_type =GUEST_DISK_BUS_TYPE_SCSI ; + disk->bus = tgt[0 ]; + disk->target = tgt[1 ]; + disk->unit = tgt[2 ]; + }else { +/* virtio-blk: 1 disk per 1 device */ + disk->bus_type =GUEST_DISK_BUS_TYPE_VIRTIO ; + } + +return true; +} +/* Store disk device info specified by @sysfs into @fs */ static void build_guest_fsinfo_for_real_device(char const *syspath, GuestFilesystemInfo *fs,
@@ -1046,7 +1079,14 @@ static void build_guest_fsinfo_for_real_device(char const *syspath,udev_device_unref (udevice);#endif - has_hwinf =build_guest_fsinfo_for_pci_dev (syspath, disk, errp); +if (strstr (syspath,"/devices/pci" )) { + has_hwinf =build_guest_fsinfo_for_pci_dev (syspath, disk, errp); + }else if (strstr (syspath,"/virtio" )) { + has_hwinf =build_guest_fsinfo_for_nonpci_virtio (syspath, disk, errp); + }else { +g_debug ("Unsupported device type for '%s'" , syspath); + has_hwinf = false; + }if (has_hwinf || disk->has_dev || disk->has_serial) { list->next = fs->disk;
Signature · 1 line
2.18.1
Re: [PATCH v2 4/4] qga/commands-posix: Support fsinfo for non-PCI virtio devices, too
Quoted 8 lines · Thomas Huth
QEMU on s390x uses virtio via channel I/O instead of PCI by default. Add a function to detect and provide information for virtio-scsi and virtio-block devices here, too.
Signed-off-by Thomas Huth <[email protected]>--- qga/commands-posix.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-)
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoting Thomas Huth (2020-07-21 23:40:24)
Quoted 10 lines
The information that can be retrieved via UDEV is also usable for non-PCI devices. So let's allow
build_guest_fsinfo_for_real_device()on non-PCI devices, too. This is required to fix the bug that CCW devices show up without "Target" when running libvirt's "virsh domfsinfo" command (see
https://bugzilla.redhat.com/show_bug.cgi?id=1755075 for details).v2:
- Useg_new0instead ofg_malloc0(as suggested by Daniel)
- Init fields to -1 explicitely, not via memset (Daniel)
- Add the fourth patch to also fill in virtio information on s390x
Thanks, patches 2-4 applied to qga-staging tree for 5.2:
https://github.com/mdroth/qemu/commits/qga-staging
I've sent a pull request for 5.1 with patch 1/4
Quoted 16 lines
Thomas Huth (4):
qga/qapi-schema: Document -1 for invalid PCI address fields qga/commands-posix: Reworkbuild_guest_fsinfo_for_real_device()
function
qga/commands-posix: Move the udev code from the pci to the generic
function
qga/commands-posix: Support fsinfo for non-PCI virtio devices, tooqga/commands-posix.c | 157 ++++++++++++++++++++++++++++++------------- qga/qapi-schema.json | 2 +- 2 files changed, 110 insertions(+), 49 deletions(-)Signature · 1 line
2.18.1