ARM:dts:aspeed: Initial device tree for AMD EthanolX
Subsystems (3)
PATCH v2 1/1 ARM:dts:aspeed: Initial device tree for AMD EthanolX
Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD.
AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines.
This also adds an entry of AMD EthanolX device tree file in Makefile.
---
Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 221 ++++++++++++++++++ 2 files changed, 222 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ + aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +221 -0
221 lines not on this page · raw message
Signature · 1 line
2.17.1
Joel Stanley
maintainerQuoted 123 lines · Supreeth Venkatesh
Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD.
AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines.This also adds an entry of AMD EthanolX device tree file in
Makefile.Signed-off-by Supreeth Venkatesh <[email protected]>---
Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 221 ++++++++++++++++++ 2 files changed, 222 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ + aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +83
-0@@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 AMD Inc. +// Author: Supreeth Venkatesh <[email protected]> +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "AMD EthanolX BMC"; + compatible = "amd,ethanolx-bmc", "aspeed,ast2500"; + + memory at 80000000 { + reg = <0x80000000 0x20000000>; + }; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; + }; + }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + }; +}; + +&fmc { + status = "okay"; + flash at 0 { + status = "okay"; + m25p,fast-read; + #include "openbmc-flash-layout.dtsi" + }; +}; + + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&uart1 { + //Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + //BMC Console + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default>; +};
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts line 93
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +10
-0+ +//APML for P0 +&i2c0 { + reg = <0x80 0x40>; + status = "okay"; +}; + +//APML for P1 +&i2c1 { + reg = <0xc0 0x40>;
This is unusual. i2c1 is at 0x80; this will clash with i2c2.
Note that the i2c naming in linux counts from zero, whereas the ASPEED docs count from 1. So if your board layout has I2C1, you actually want i2c2 in the device tree.
Quoted 131 lines
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +128
-1+ status = "okay"; +}; + +// Thermal Sensors +&i2c7 { + status = "okay"; + + lm75a at 48 { + compatible = "national,lm75a"; + reg = <0x48>; + }; + + lm75a at 49 { + compatible = "national,lm75a"; + reg = <0x49>; + }; + + lm75a at 4a { + compatible = "national,lm75a"; + reg = <0x4a>; + }; + + lm75a at 4b { + compatible = "national,lm75a"; + reg = <0x4b>; + }; + + lm75a at 4c { + compatible = "national,lm75a"; + reg = <0x4c>; + }; + + lm75a at 4d { + compatible = "national,lm75a"; + reg = <0x4d>; + }; + + lm75a at 4e { + compatible = "national,lm75a"; + reg = <0x4e>; + }; + + lm75a at 4f { + compatible = "national,lm75a"; + reg = <0x4f>; + }; +}; + +&kcs1 { + status = "okay"; + kcs_addr = <0x60>; +}; + +&kcs2 { + status = "okay"; + kcs_addr = <0x62>; +}; + +&kcs4 { + status = "okay"; + kcs_addr = <0x97DE>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&lpc_ctrl { + //Enable lpc clock + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan at 0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan at 1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan at 2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan at 3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan at 4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan at 5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan at 6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan at 7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + + + --2.17.1
Quoted 140 lines · Joel Stanley
[CAUTION: External Email]
Quoted 123 lines · Supreeth Venkatesh
Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD.
AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines.This also adds an entry of AMD EthanolX device tree file in
Makefile.Signed-off-by Supreeth Venkatesh <[email protected]>---
Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 221 ++++++++++++++++++ 2 files changed, 222 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ + aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +83
-0@@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 AMD Inc. +// Author: Supreeth Venkatesh <[email protected]> +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "AMD EthanolX BMC"; + compatible = "amd,ethanolx-bmc", "aspeed,ast2500"; + + memory at 80000000 { + reg = <0x80000000 0x20000000>; + }; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; + }; + }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + }; +}; + +&fmc { + status = "okay"; + flash at 0 { + status = "okay"; + m25p,fast-read; + #include "openbmc-flash-layout.dtsi" + }; +}; + + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&uart1 { + //Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + //BMC Console + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default>; +};arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts line 93
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +10
-0+ +//APML for P0 +&i2c0 { + reg = <0x80 0x40>; + status = "okay"; +}; + +//APML for P1 +&i2c1 { + reg = <0xc0 0x40>;This is unusual. i2c1 is at
0x80; this will clash with i2c2.
Quoted 3 lines
Note that the i2c naming in linux counts from zero, whereas the ASPEED docs count from 1. So if your board layout has I2C1, you actually want i2c2 in the device tree.
Thanks for catching this. Patch v3 sent.
Quoted 132 lines
Quoted 132 lines
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +128
-1+ status = "okay"; +}; + +// Thermal Sensors +&i2c7 { + status = "okay"; + + lm75a at 48 { + compatible = "national,lm75a"; + reg = <0x48>; + }; + + lm75a at 49 { + compatible = "national,lm75a"; + reg = <0x49>; + }; + + lm75a at 4a { + compatible = "national,lm75a"; + reg = <0x4a>; + }; + + lm75a at 4b { + compatible = "national,lm75a"; + reg = <0x4b>; + }; + + lm75a at 4c { + compatible = "national,lm75a"; + reg = <0x4c>; + }; + + lm75a at 4d { + compatible = "national,lm75a"; + reg = <0x4d>; + }; + + lm75a at 4e { + compatible = "national,lm75a"; + reg = <0x4e>; + }; + + lm75a at 4f { + compatible = "national,lm75a"; + reg = <0x4f>; + }; +}; + +&kcs1 { + status = "okay"; + kcs_addr = <0x60>; +}; + +&kcs2 { + status = "okay"; + kcs_addr = <0x62>; +}; + +&kcs4 { + status = "okay"; + kcs_addr = <0x97DE>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&lpc_ctrl { + //Enable lpc clock + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan at 0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan at 1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan at 2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan at 3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan at 4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan at 5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan at 6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan at 7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + + + --2.17.1