Skip to contentSkip to conversation

ARM:dts:aspeed: Initial device tree for AMD EthanolX

PATCH In review Supreeth Venkatesh 2 participants 2 messages Jul 24, 2020 – Jul 27, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM:dts:aspeed: Initial device tree for AMD EthanolX

Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD.

AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines.

This also adds an entry of AMD EthanolX device tree file in Makefile.

---
Changes since v2:
* Removed incorrect I2C0 and I2C1 Reg addresses

Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface

---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 219 ++++++++++++++++++
 2 files changed, 220 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
arch/arm/boot/dts/Makefile +1 -0
index d6dfdf73e66b..55ed881d2ebc 100644
@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +219 -0

219 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 4 lines · Supreeth Venkatesh

Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD.

Quoted 8 lines

AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines.

This also adds an entry of AMD EthanolX device tree file in Makefile.

Looks good! I've merged this to dt-for-5.9.

Cheers,

Joel

Quoted 253 lines

---
Changes since v2:
* Removed incorrect I2C0 and I2C1 Reg addresses

Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface

---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 219 ++++++++++++++++++
 2 files changed, 220 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
arch/arm/boot/dts/Makefile +1 -0
index d6dfdf73e66b..55ed881d2ebc 100644
@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
        aspeed-ast2500-evb.dtb \
        aspeed-ast2600-evb.dtb \
+       aspeed-bmc-amd-ethanolx.dtb \
        aspeed-bmc-arm-centriq2400-rep.dtb \
        aspeed-bmc-arm-stardragon4800-rep2.dtb \
        aspeed-bmc-facebook-cmm.dtb \
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file +219 -1
new file mode 100644
index 000000000000..60ba86f3e5bc
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <[email protected]>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "AMD EthanolX BMC";
+       compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+       memory at 80000000 {
+               reg = <0x80000000 0x20000000>;
+       };
+       aliases {
+               serial0 = &uart1;
+               serial4 = &uart5;
+       };
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200 earlyprintk";
+       };
+       leds {
+               compatible = "gpio-leds";
+
+               fault {
+                       gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+               };
+
+               identify {
+                       gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+               };
+       };
+       iio-hwmon {
+               compatible = "iio-hwmon";
+               io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+       };
+};
+
+&fmc {
+       status = "okay";
+       flash at 0 {
+               status = "okay";
+               m25p,fast-read;
+               #include "openbmc-flash-layout.dtsi"
+       };
+};
+
+
+&mac0 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rmii1_default>;
+       clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+                <&syscon ASPEED_CLK_MAC1RCLK>;
+       clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+       //Host Console
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_txd1_default
+                    &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+       //BMC Console
+       status = "okay";
+};
+
+&adc {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_adc0_default
+                    &pinctrl_adc1_default
+                    &pinctrl_adc2_default
+                    &pinctrl_adc3_default
+                    &pinctrl_adc4_default>;
+};
+
+//APML for P0
+&i2c0 {
+       status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+       status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+       status = "okay";
+
+       lm75a at 48 {
+               compatible = "national,lm75a";
+               reg = <0x48>;
+       };
+
+       lm75a at 49 {
+               compatible = "national,lm75a";
+               reg = <0x49>;
+       };
+
+       lm75a at 4a {
+               compatible = "national,lm75a";
+               reg = <0x4a>;
+       };
+
+       lm75a at 4b {
+               compatible = "national,lm75a";
+               reg = <0x4b>;
+       };
+
+       lm75a at 4c {
+               compatible = "national,lm75a";
+               reg = <0x4c>;
+       };
+
+       lm75a at 4d {
+               compatible = "national,lm75a";
+               reg = <0x4d>;
+       };
+
+       lm75a at 4e {
+               compatible = "national,lm75a";
+               reg = <0x4e>;
+       };
+
+       lm75a at 4f {
+               compatible = "national,lm75a";
+               reg = <0x4f>;
+       };
+};
+
+&kcs1 {
+       status = "okay";
+       kcs_addr = <0x60>;
+};
+
+&kcs2 {
+       status = "okay";
+       kcs_addr = <0x62>;
+};
+
+&kcs4 {
+       status = "okay";
+       kcs_addr = <0x97DE>;
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+       //Enable lpc clock
+       status = "okay";
+};
+
+&pwm_tacho {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm0_default
+       &pinctrl_pwm1_default
+       &pinctrl_pwm2_default
+       &pinctrl_pwm3_default
+       &pinctrl_pwm4_default
+       &pinctrl_pwm5_default
+       &pinctrl_pwm6_default
+       &pinctrl_pwm7_default>;
+
+       fan at 0 {
+               reg = <0x00>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+       };
+
+       fan at 1 {
+               reg = <0x01>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+       };
+
+       fan at 2 {
+               reg = <0x02>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+       };
+
+       fan at 3 {
+               reg = <0x03>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+       };
+
+       fan at 4 {
+               reg = <0x04>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+       };
+
+       fan at 5 {
+               reg = <0x05>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+       };
+
+       fan at 6 {
+               reg = <0x06>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+       };
+
+       fan at 7 {
+               reg = <0x07>;
+               aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+       };
+};
+
+
+
--

2.17.1