Skip to contentSkip to conversation

Update TI K3 cbass interconnect node names

PATCH New Suman Anna 2 participants 4 messages Jul 24, 2020 – Aug 11, 2020 Arm (32-bit)

lore
Share & tools
lore

Suman Anna

author
#0 lore raw

cover Update TI K3 cbass interconnect node names

Hi Lokesh,

The following 2 patches are minor cleanups that fix the various CBASS interconnect node names from "interconnect" to "bus" on K3 AM65x and J721E SoCs. "bus" is the correct dt-schema acceptible node name.

regards
Suman

Suman Anna (2):
arm: dts: k3-am65: Fix interconnect node names
arm: dts: k3-j721e: Fix interconnect node names

 arch/arm/dts/k3-am65.dtsi  | 6 +++---
 arch/arm/dts/k3-j721e.dtsi | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)
Signature · 1 line
2.26.0
author
#1 lore raw

PATCH 1/2 arm: dts: k3-am65: Fix interconnect node names

The various CBASS interconnect nodes on K3 AM65x SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".

---
 arch/arm/dts/k3-am65.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/k3-am65.dtsi +3 -3
index 3d89bf32a9d1..4d6d196b2aa3 100644
@@ -62,7 +62,7 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	cbass_main: interconnect at 100000 {
+	cbass_main: bus at 100000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -87,7 +87,7 @@
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
 
-		cbass_mcu: interconnect at 28380000 {
+		cbass_mcu: bus at 28380000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -104,7 +104,7 @@
 				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
 				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
 
-			cbass_wakeup: interconnect at 42040000 {
+			cbass_wakeup: bus at 42040000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
Signature · 1 line
2.26.0
author
#2 lore raw

PATCH 2/2 arm: dts: k3-j721e: Fix interconnect node names

In reply to Suman Anna

The various CBASS interconnect nodes on K3 J721E SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".

---
 arch/arm/dts/k3-j721e.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/k3-j721e.dtsi +2 -2
index 6bd5aabe2374..b2670752dcd4 100644
@@ -131,7 +131,7 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	cbass_main: interconnect at 100000 {
+	cbass_main: bus at 100000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -164,7 +164,7 @@
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
 
-		cbass_mcu_wakeup: interconnect at 28380000 {
+		cbass_mcu_wakeup: bus at 28380000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
Signature · 1 line
2.26.0
#3 lore raw

cover Update TI K3 cbass interconnect node names

In reply to Suman Anna
Quoted 6 lines · Suman Anna

Hi Lokesh,

The following 2 patches are minor cleanups that fix the various CBASS interconnect node names from "interconnect" to "bus" on K3 AM65x and J721E SoCs. "bus" is the correct dt-schema acceptible node name.

Applied to u-boot-ti

Thanks and regards,
Lokesh