Update TI K3 cbass interconnect node names
cover Update TI K3 cbass interconnect node names
Hi Lokesh,
The following 2 patches are minor cleanups that fix the various CBASS interconnect node names from "interconnect" to "bus" on K3 AM65x and J721E SoCs. "bus" is the correct dt-schema acceptible node name.
regards
Suman
Suman Anna (2):
arm: dts: k3-am65: Fix interconnect node names
arm: dts: k3-j721e: Fix interconnect node names
arch/arm/dts/k3-am65.dtsi | 6 +++--- arch/arm/dts/k3-j721e.dtsi | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-)
Signature · 1 line
2.26.0
PATCH 1/2 arm: dts: k3-am65: Fix interconnect node names
The various CBASS interconnect nodes on K3 AM65x SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".
--- arch/arm/dts/k3-am65.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/k3-am65.dtsi +3 -3
@@ -62,7 +62,7 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - cbass_main: interconnect at 100000 { + cbass_main: bus at 100000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -87,7 +87,7 @@ <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; - cbass_mcu: interconnect at 28380000 { + cbass_mcu: bus at 28380000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -104,7 +104,7 @@ <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ - cbass_wakeup: interconnect at 42040000 { + cbass_wakeup: bus at 42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
Signature · 1 line
2.26.0
PATCH 2/2 arm: dts: k3-j721e: Fix interconnect node names
In reply to Suman AnnaThe various CBASS interconnect nodes on K3 J721E SoCs are defined using the node name "interconnect". This is not a valid node name as per the dt-schema. Fix these node names to use the standard name used for SoC interconnects, "bus".
--- arch/arm/dts/k3-j721e.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/k3-j721e.dtsi +2 -2
@@ -131,7 +131,7 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - cbass_main: interconnect at 100000 { + cbass_main: bus at 100000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -164,7 +164,7 @@ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; - cbass_mcu_wakeup: interconnect at 28380000 { + cbass_mcu_wakeup: bus at 28380000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
Signature · 1 line
2.26.0
cover Update TI K3 cbass interconnect node names
In reply to Suman AnnaQuoted 6 lines · Suman Anna
Hi Lokesh,
The following 2 patches are minor cleanups that fix the various CBASS interconnect node names from "interconnect" to "bus" on K3 AM65x and J721E SoCs. "bus" is the correct dt-schema acceptible node name.
Applied to u-boot-ti
Thanks and regards,
Lokesh