iio:adc:ltc2371: add support for ltc2361/ltc2363
Subsystems (3)
Changelog v2->v3:
No changes, adding dt maillist to CC.
Changelog v1->v2:
- document power supply in yaml
- reorder enums in alphabetical order
- add missing include
- drop the of_match_ptr protection
Darius Berghe (3):
ltc2471: add of_match_table for existing devices
ltc2471: ltc2461/ltc2463 compatible strings ltc2471 driver yaml
.../bindings/iio/adc/adi,ltc2471.yaml | 49 +++++++++++++++++++ drivers/iio/adc/ltc2471.c | 25 ++++++++-- 2 files changed, 70 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml
Signature · 1 line
2.27.0
PATCH v3 1/3 ltc2471: add of_match_table for existing devices
OF style match table was missing, this commit adds it.
--- drivers/iio/adc/ltc2471.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/iio/adc/ltc2471.c +9 -0
@@ -14,6 +14,7 @@#include <linux/module.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +#include <linux/mod_devicetable.h> enum ltc2471_chips { ltc2471,
@@ -144,9 +145,17 @@ static const struct i2c_device_id ltc2471_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, ltc2471_i2c_id); +static const struct of_device_id ltc2471_of_match[] = { + { .compatible ="adi,ltc2471" }, + { .compatible ="adi,ltc2473" }, + {} +}; +MODULE_DEVICE_TABLE (of, ltc2471_of_match); +static struct i2c_driver ltc2471_i2c_driver = { .driver = { .name ="ltc2471" , + .of_match_table = ltc2471_of_match }, .probe = ltc2471_i2c_probe, .id_table = ltc2471_i2c_id,
Signature · 1 line
2.27.0
PATCH v3 2/3 ltc2471: ltc2461/ltc2463 compatible strings
In reply to Darius BergheAdd compatible strings for these devices in the existing ltc2471 driver.
--- drivers/iio/adc/ltc2471.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/iio/adc/ltc2471.c +12 -4
@@ -1,5 +1,7 @@/* -* Driver for Linear Technology LTC2471 and LTC2473 voltage monitors +* Driver for Linear Technology LTC2461, LTC2463, LTC2471 and LTC2473 voltage +* monitors. +* The LTC2463 is identical to the 2461, but reports a differential signal. * The LTC2473 is identical to the 2471, but reports a differential signal. * * Copyright (C) 2017 Topic Embedded Products
@@ -17,8 +19,10 @@#include <linux/mod_devicetable.h> enum ltc2471_chips { + ltc2461, + ltc2463, ltc2471, - ltc2473, + ltc2473 };struct ltc2471_data {
@@ -122,7 +126,7 @@ static int ltc2471_i2c_probe(struct i2c_client *client, indio_dev->name = id->name; indio_dev->info = <c2471_info; indio_dev->modes =INDIO_DIRECT_MODE ; -if (id->driver_data == ltc2473) +if (id->driver_data == ltc2473 || id->driver_data == ltc2463) indio_dev->channels = ltc2473_channel;else indio_dev->channels = ltc2471_channel;
@@ -139,6 +143,8 @@ static int ltc2471_i2c_probe(struct i2c_client *client, }static const struct i2c_device_id ltc2471_i2c_id[] = { + {"ltc2461" , ltc2461 }, + {"ltc2463" , ltc2463 }, {"ltc2471" , ltc2471 }, {"ltc2473" , ltc2473 }, {}
@@ -146,6 +152,8 @@ static const struct i2c_device_id ltc2471_i2c_id[] = {MODULE_DEVICE_TABLE (i2c, ltc2471_i2c_id);static const struct of_device_id ltc2471_of_match[] = { + { .compatible ="adi,ltc2461" }, + { .compatible ="adi,ltc2463" }, { .compatible ="adi,ltc2471" }, { .compatible ="adi,ltc2473" }, {}
@@ -163,6 +171,6 @@ static struct i2c_driver ltc2471_i2c_driver = {module_i2c_driver (ltc2471_i2c_driver); -MODULE_DESCRIPTION ("LTC2471/LTC2473 ADC driver" ); +MODULE_DESCRIPTION ("LTC2461/LTC2463/LTC2471/LTC2473 ADC driver" );MODULE_AUTHOR ("Topic Embedded Products" );MODULE_LICENSE ("GPL v2" );
Signature · 1 line
2.27.0
Re: [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings
Quoted 4 lines · On Mon, 27 Jul 2020 16:58:33 +0300 Darius Berghe <[email protected]>…
Add compatible strings for these devices in the existing ltc2471 driver.
Signed-off-by Darius Berghe <[email protected]>
Hi Darius,
A few additional minor comments from me.
Quoted 18 lines
--- drivers/iio/adc/ltc2471.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)drivers/iio/adc/ltc2471.c +3
-1@@ -1,5 +1,7 @@/* -* Driver for Linear Technology LTC2471 and LTC2473 voltage monitors +* Driver for Linear Technology LTC2461, LTC2463, LTC2471 and LTC2473 voltage +* monitors. +* The LTC2463 is identical to the 2461, but reports a differential signal. * The LTC2473 is identical to the 2471, but reports a differential signal. * * Copyright (C) 2017 Topic Embedded Products
drivers/iio/adc/ltc2471.c line 25
Quoted 8 lines
drivers/iio/adc/ltc2471.c +3
-1@@ -17,8 +19,10 @@#include <linux/mod_devicetable.h> enum ltc2471_chips { + ltc2461, + ltc2463, ltc2471, - ltc2473, + ltc2473
Why drop the comma? We've just added two new devices. Seems possible there may be more in the future!
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client *client, · line 129
Quoted 9 lines
drivers/iio/adc/ltc2471.c +1
-1};struct ltc2471_data {@@ -122,7 +126,7 @@ static int ltc2471_i2c_probe(struct i2c_client *client, indio_dev->name = id->name; indio_dev->info = <c2471_info; indio_dev->modes =INDIO_DIRECT_MODE ; -if (id->driver_data == ltc2473) +if (id->driver_data == ltc2473 || id->driver_data == ltc2463)
If the only use of driver_data is going to be this check, then just set it to 2473 for the 2463 and 2473. It's not uncommon to do this when we have a bunch of devices that look the same to software.
Quoted 29 lines
drivers/iio/adc/ltc2471.c +5
-1indio_dev->channels = ltc2473_channel; else indio_dev->channels = ltc2471_channel;@@ -139,6 +143,8 @@ static int ltc2471_i2c_probe(struct i2c_client *client, }static const struct i2c_device_id ltc2471_i2c_id[] = { + {"ltc2461" , ltc2461 }, + {"ltc2463" , ltc2463 }, {"ltc2471" , ltc2471 }, {"ltc2473" , ltc2473 }, {}@@ -146,6 +152,8 @@ static const struct i2c_device_id ltc2471_i2c_id[] = {MODULE_DEVICE_TABLE (i2c, ltc2471_i2c_id);static const struct of_device_id ltc2471_of_match[] = { + { .compatible ="adi,ltc2461" }, + { .compatible ="adi,ltc2463" }, { .compatible ="adi,ltc2471" }, { .compatible ="adi,ltc2473" }, {}@@ -163,6 +171,6 @@ static struct i2c_driver ltc2471_i2c_driver = {module_i2c_driver (ltc2471_i2c_driver); -MODULE_DESCRIPTION ("LTC2471/LTC2473 ADC driver" ); +MODULE_DESCRIPTION ("LTC2461/LTC2463/LTC2471/LTC2473 ADC driver" );MODULE_AUTHOR ("Topic Embedded Products" );MODULE_LICENSE ("GPL v2" );
RE: [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings
Hi Jonathan,
Thanks for review, comments inline.
Quoted 42 lines
-----Original Message-----
From: Jonathan Cameron <[email protected]>
Sent: Monday, July 27, 2020 8:27 PM
To: Berghe, Darius <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings[External]
Quoted 4 lines · On Mon, 27 Jul 2020 16:58:33 +0300 Darius Berghe <[email protected]>…
Add compatible strings for these devices in the existing ltc2471 driver.
Signed-off-by Darius Berghe <[email protected]>Hi Darius,
A few additional minor comments from me.
Quoted 20 lines
--- drivers/iio/adc/ltc2471.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)drivers/iio/adc/ltc2471.c +4
-1@@ -1,5 +1,7 @@/* -* Driver for Linear Technology LTC2471 and LTC2473 voltage monitors +* Driver for Linear Technology LTC2461, LTC2463, LTC2471 and LTC2473 +voltage +* monitors. +* The LTC2463 is identical to the 2461, but reports a differential signal. * The LTC2473 is identical to the 2471, but reports a differential signal. * * Copyright (C) 2017 Topic Embedded Products @@ -17,8 +19,10 @@ #include <
linux/mod_devicetable.h>
Quoted 10 lines
drivers/iio/adc/ltc2471.c line 25
Quoted 6 lines
enum
ltc2471_chips{drivers/iio/adc/ltc2471.c +3
-1+ ltc2461, + ltc2463, ltc2471, - ltc2473, + ltc2473Why drop the comma? We've just added two new devices. Seems possible there may be more in the future!
Ok, will leave it there in v4.
Quoted 5 lines
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client
Quoted 4 lines
};
struct
ltc2471_data{drivers/iio/adc/ltc2471.c +0
-0@@ -122,7 +126,7 @@ static int ltc2471_i2c_probe(struct i2c_client*client,
Quoted 8 lines
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client *client, · line 129
Quoted 5 lines
drivers/iio/adc/ltc2471.c +1
-1indio_dev->name = id->name; indio_dev->info = <c2471_info; indio_dev->modes =INDIO_DIRECT_MODE ; -if (id->driver_data == ltc2473) +if (id->driver_data == ltc2473 || id->driver_data == ltc2463)If the only use of
driver_datais going to be this check, then just set it to 2473 for the 2463 and 2473. It's not uncommon to do this when we have a bunch of devices that look the same to software.
Yes the chips are similar but there is at least one feature which requires this level of distinguishing them: the sampling rate (60sps for ltc2461/3 and selectable 208/833sps for ltc2471/3). It's not used anywhere for now but I can see it being implemented as standard IIO dev attribute sampling frequency.
Quoted 31 lines
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client *client,
Quoted 4 lines
drivers/iio/adc/ltc2471.c +0
-0indio_dev->channels = ltc2473_channel; else indio_dev->channels = ltc2471_channel; @@ -139,6 +143,8@@ static
Quoted 18 lines
int ltc2471_i2c_probe(struct
i2c_client*client, }static const struct
i2c_device_idltc2471_i2c_id[] = {drivers/iio/adc/ltc2471.c +4
-0+ { "ltc2461", ltc2461 }, + { "ltc2463", ltc2463 }, { "ltc2471", ltc2471 }, { "ltc2473", ltc2473 }, {}@@ -146,6 +152,8 @@ static const struct i2c_device_id ltc2471_i2c_id[] = { MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id);static const struct of_device_id ltc2471_of_match[] = { + { .compatible ="adi,ltc2461" }, + { .compatible ="adi,ltc2463" }, { .compatible ="adi,ltc2471" }, { .compatible ="adi,ltc2473" }, {}drivers/iio/adc/ltc2471.c static struct i2c_driver ltc2471_i2c_driver = { · line 174
Quoted 5 lines
drivers/iio/adc/ltc2471.c +1
-1@@ -163,6 +171,6 @@ static struct i2c_driver ltc2471_i2c_driver = {module_i2c_driver (ltc2471_i2c_driver); -MODULE_DESCRIPTION ("LTC2471/LTC2473 ADC driver" ); +MODULE_DESCRIPTION("LTC2461/LTC2463/LTC2471/LTC2473 ADCdriver");
drivers/iio/adc/ltc2471.c static struct i2c_driver ltc2471_i2c_driver = { · line 175
Quoted 1 line
drivers/iio/adc/ltc2471.c +0
-0MODULE_AUTHOR("Topic Embedded Products"); MODULE_LICENSE("GPLv2");
Jonathan Cameron
maintainerRe: [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings
Quoted 73 lines · Darius
Hi Jonathan,
Thanks for review, comments inline.
Quoted 42 lines
-----Original Message-----
From: Jonathan Cameron <[email protected]>
Sent: Monday, July 27, 2020 8:27 PM
To: Berghe, Darius <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings[External]
Quoted 4 lines · On Mon, 27 Jul 2020 16:58:33 +0300 Darius Berghe <[email protected]>…
Add compatible strings for these devices in the existing ltc2471 driver.
Signed-off-by Darius Berghe <[email protected]>Hi Darius,
A few additional minor comments from me.
Quoted 20 lines
--- drivers/iio/adc/ltc2471.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)drivers/iio/adc/ltc2471.c +4
-1@@ -1,5 +1,7 @@/* -* Driver for Linear Technology LTC2471 and LTC2473 voltage monitors +* Driver for Linear Technology LTC2461, LTC2463, LTC2471 and LTC2473 +voltage +* monitors. +* The LTC2463 is identical to the 2461, but reports a differential signal. * The LTC2473 is identical to the 2471, but reports a differential signal. * * Copyright (C) 2017 Topic Embedded Products @@ -17,8 +19,10 @@ #include <
linux/mod_devicetable.h>Quoted 10 lines
drivers/iio/adc/ltc2471.c line 25
Quoted 6 lines
enum
ltc2471_chips{drivers/iio/adc/ltc2471.c +3
-1+ ltc2461, + ltc2463, ltc2471, - ltc2473, + ltc2473Why drop the comma? We've just added two new devices. Seems possible there may be more in the future!
Ok, will leave it there in v4.
Quoted 5 lines
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client
Quoted 4 lines
};
struct
ltc2471_data{drivers/iio/adc/ltc2471.c +0
-0@@ -122,7 +126,7 @@ static int ltc2471_i2c_probe(struct i2c_client*client,
Quoted 8 lines
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client *client, · line 129
Quoted 5 lines
drivers/iio/adc/ltc2471.c +1
-1indio_dev->name = id->name; indio_dev->info = <c2471_info; indio_dev->modes =INDIO_DIRECT_MODE ; -if (id->driver_data == ltc2473) +if (id->driver_data == ltc2473 || id->driver_data == ltc2463)If the only use of
driver_datais going to be this check, then just set it to 2473 for the 2463 and 2473. It's not uncommon to do this when we have a bunch of devices that look the same to software.
Quoted 4 lines
Yes the chips are similar but there is at least one feature which requires this level of distinguishing them: the sampling rate (60sps for ltc2461/3 and selectable 208/833sps for ltc2471/3). It's not used anywhere for now but I can see it being implemented as standard IIO dev attribute sampling frequency.
Fair enough. Perhaps a note in the patch description so no one asks the question on the next version?
Quoted 33 lines
Quoted 32 lines
drivers/iio/adc/ltc2471.c static int ltc2471_i2c_probe(struct i2c_client *client,
Quoted 5 lines
drivers/iio/adc/ltc2471.c +0
-0indio_dev->channels = ltc2473_channel; else indio_dev->channels = ltc2471_channel; @@ -139,6 +143,8@@ static
Quoted 18 lines
int ltc2471_i2c_probe(struct
i2c_client*client, }static const struct
i2c_device_idltc2471_i2c_id[] = {drivers/iio/adc/ltc2471.c +4
-0+ { "ltc2461", ltc2461 }, + { "ltc2463", ltc2463 }, { "ltc2471", ltc2471 }, { "ltc2473", ltc2473 }, {}@@ -146,6 +152,8 @@ static const struct i2c_device_id ltc2471_i2c_id[] = { MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id);static const struct of_device_id ltc2471_of_match[] = { + { .compatible ="adi,ltc2461" }, + { .compatible ="adi,ltc2463" }, { .compatible ="adi,ltc2471" }, { .compatible ="adi,ltc2473" }, {}drivers/iio/adc/ltc2471.c static struct i2c_driver ltc2471_i2c_driver = { · line 174
Quoted 5 lines
drivers/iio/adc/ltc2471.c +1
-1@@ -163,6 +171,6 @@ static struct i2c_driver ltc2471_i2c_driver = {module_i2c_driver (ltc2471_i2c_driver); -MODULE_DESCRIPTION ("LTC2471/LTC2473 ADC driver" ); +MODULE_DESCRIPTION("LTC2461/LTC2463/LTC2471/LTC2473 ADCdriver");
drivers/iio/adc/ltc2471.c static struct i2c_driver ltc2471_i2c_driver = { · line 175
Quoted 1 line
drivers/iio/adc/ltc2471.c +0
-0MODULE_AUTHOR("Topic Embedded Products"); MODULE_LICENSE("GPLv2");
PATCH v3 3/3 ltc2471 driver yaml
In reply to Darius BergheAdd dt binding documentation for ltc2471 driver. This covers all supported devices.
--- .../bindings/iio/adc/adi,ltc2471.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml new file +49 -0
@@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ltc2471.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2471 16-bit I2C Sigma-Delta ADC + +maintainers: + - Mike Looijmans <[email protected]> + +description: | + Analog Devices LTC2461 (single-ended) and LTC2463 (differential) 16-bit + I2C Sigma-Delta ADC with 60sps output rate. + https://www.analog.com/media/en/technical-documentation/data-sheets/24613fa.pdf + + Analog Devices LTC2471 (single-ended) and LTC2473 (differential) 16-bit + I2C Sigma-Delta ADC with selectable 208/833sps output rate. + https://www.analog.com/media/en/technical-documentation/data-sheets/24713fb.pdf + +properties: + compatible: + enum: + - adi,ltc2461 + - adi,ltc2463 + - adi,ltc2471 + - adi,ltc2473 + + reg: + maxItems: 1 + + avcc-supply: + description: + Phandle to the Avcc power supply (2.7V - 5.5V) + +required: + - compatible + - reg + +examples: + - | + i2c0 { + adc@14 { + compatible = "adi,ltc2461"; + reg = <0x14>; + }; + }; +
Signature · 1 line
2.27.0
Re: [PATCH v3 3/3] ltc2471 driver yaml
Quoted 4 lines · On Mon, 27 Jul 2020 16:58:34 +0300 Darius Berghe <[email protected]>…
Add dt binding documentation for ltc2471 driver. This covers all supported devices.
Signed-off-by Darius Berghe <[email protected]>
+CC Mike given the doc lists him as maintainer.
Quoted 36 lines
--- .../bindings/iio/adc/adi,ltc2471.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yamlDocumentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml new file +25
-0@@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ltc2471.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2471 16-bit I2C Sigma-Delta ADC + +maintainers: + - Mike Looijmans <[email protected]> + +description: | + Analog Devices LTC2461 (single-ended) and LTC2463 (differential) 16-bit + I2C Sigma-Delta ADC with 60sps output rate. + https://www.analog.com/media/en/technical-documentation/data-sheets/24613fa.pdf + + Analog Devices LTC2471 (single-ended) and LTC2473 (differential) 16-bit + I2C Sigma-Delta ADC with selectable 208/833sps output rate. + https://www.analog.com/media/en/technical-documentation/data-sheets/24713fb.pdf + +properties: + compatible: + enum: + - adi,ltc2461
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml line 35
Quoted 10 lines
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml new file +10
-0+ - adi,ltc2463 + - adi,ltc2471 + - adi,ltc2473 + + reg: + maxItems: 1 + + avcc-supply: + description: + Phandle to the Avcc power supply (2.7V - 5.5V)
additionalProperties: false
should be fine here I think...
I keep forgetting this one myself.
Quoted 14 lines
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml new file +14
-0+ +required: + - compatible + - reg + +examples: + - | + i2c0 { + adc@14 { + compatible = "adi,ltc2461"; + reg = <0x14>; + }; + }; +
Rob Herring
maintainerRe: [PATCH v3 3/3] ltc2471 driver yaml
In reply to Darius BergheQuoted 9 lines · Darius Berghe
Add dt binding documentation for ltc2471 driver. This covers all supported devices.
Signed-off-by Darius Berghe <[email protected]>--- .../bindings/iio/adc/adi,ltc2471.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/iio/adc/adi,ltc2471.yaml#
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dts:22.13-26: Warning (reg_format): /example-0/i2c0/adc@14:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dts:20.18-23.13: Warning (avoid_default_addr_size): /example-0/i2c0/adc@14: Relying on default #address-cells value Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dts:20.18-23.13: Warning (avoid_default_addr_size): /example-0/i2c0/adc@14: Relying on default #size-cells value Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
See https://patchwork.ozlabs.org/patch/1336970
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.