Skip to contentSkip to conversation

mx6cuboxi: enable OF_PLATDATA with MMC support

PATCH New Walter Lozano 2 participants 13 messages Jul 29, 2020 – Aug 4, 2020

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v3 cover mx6cuboxi: enable OF_PLATDATA with MMC support

The SPL in iMX6 boards is restricted to 68 KB as this is the free available space in OCRAM for most revisions. In this context, adding OF_CONTROL and DM increases the SPL size which could make it difficult to add specific features required for custom scenarios.

These patches aim to take advantage of OF_PLATADATA in order to reduce the SPL size in this scenario, by parsing DT data to generate platdata structures, and thus removing the overhead caused by DT and related libraries.

This series is focused in MMC driver, which is used for boot in boards such as Cubox-i. Also, in order to support CD, the OF_PLATDATA support is also implemented on GPIO driver.

After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM.

Changes in v3:
- Fix commit message
- Rework to resolve merge conflicts
- Change #ifdef to if when possible

Changes in v2:
- Improve commit message with footprint reduction

Walter Lozano (6):
mmc: fsl_esdhc_imx: rename driver name to match ll_entry
mmc: fsl_esdhc_imx: add OF_PLATDATA support
gpio: mxc_gpio: add OF_PLATDATA support
mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled
drivers: rename more drivers to match compatible string
mx6cuboxi: enable OF_PLATDATA

 configs/mx6cuboxi_defconfig        |  1 +
 drivers/gpio/mxc_gpio.c            | 26 +++++++--
 drivers/mmc/fsl_esdhc_imx.c        | 92 +++++++++++++++++++++++++-----
 drivers/pinctrl/nxp/pinctrl-imx6.c |  6 +-
 drivers/video/imx/mxc_ipuv3_fb.c   |  4 +-
 5 files changed, 105 insertions(+), 24 deletions(-)
Signature · 1 line
2.20.1
#1 lore raw

PATCH v3 1/6 mmc: fsl_esdhc_imx: rename driver name to match ll_entry

As discussed in commit <addf358bac1d2bd0> rename fsl_esdhc_imx driver to allow the OF_PLATDATA support.

---

(no changes since v1)

 drivers/mmc/fsl_esdhc_imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/fsl_esdhc_imx.c +1 -1
index 644f4651fb..6b727dbbd5 100644
@@ -1644,7 +1644,7 @@ static int fsl_esdhc_bind(struct udevice *dev)
 #endif
 
 U_BOOT_DRIVER(fsl_esdhc) = {
-	.name	= "fsl-esdhc-mmc",
+	.name	= "fsl_esdhc",
 	.id	= UCLASS_MMC,
 	.of_match = fsl_esdhc_ids,
 	.ops	= &fsl_esdhc_ops,
Signature · 1 line
2.20.1
#2 lore raw

PATCH v3 1/6 mmc: fsl_esdhc_imx: rename driver name to match ll_entry

Quoted 4 lines

As discussed in commit <addf358bac1d2bd0> rename fsl_esdhc_imx driver to allow the OF_PLATDATA support.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH v3 2/6 mmc: fsl_esdhc_imx: add OF_PLATDATA support

In reply to Walter Lozano

In order to reduce the footprint of SPL by removing dtb and library overhead, add OF_PLATDATA support to fsl_esdhc_imx. This initial approach does not support card detection, which will be enabled after adding OF_PLATDATA support to GPIO.

---

Changes in v3:
- Fix commit message

 drivers/mmc/fsl_esdhc_imx.c | 67 +++++++++++++++++++++++++++++--------
 1 file changed, 53 insertions(+), 14 deletions(-)
drivers/mmc/fsl_esdhc_imx.c +53 -14
index 6b727dbbd5..2713682cf7 100644
@@ -33,6 +33,9 @@
 #include <dm.h>
 #include <asm-generic/gpio.h>
 #include <dm/pinctrl.h>
+#include <dt-structs.h>
+#include <mapmem.h>
+#include <dm/ofnode.h>
 
 #if !CONFIG_IS_ENABLED(BLK)
 #include "mmc_private.h"
@@ -102,6 +105,11 @@ struct fsl_esdhc {
 };
 
 struct fsl_esdhc_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/* Put this first since driver model will copy the data here */
+	struct dtd_fsl_esdhc dtplat;
+#endif
+
 	struct mmc_config cfg;
 	struct mmc mmc;
 };
@@ -1378,25 +1386,19 @@ __weak void init_clk_usdhc(u32 index)
 {
 }
 
-static int fsl_esdhc_probe(struct udevice *dev)
+static int fsl_esdhc_ofdata_to_platdata(struct udevice *dev)
 {
-	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
-	struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
-	const void *fdt = gd->fdt_blob;
-	int node = dev_of_offset(dev);
-	struct esdhc_soc_data *data =
-		(struct esdhc_soc_data *)dev_get_driver_data(dev);
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice *vqmmc_dev;
+	int ret;
 #endif
+	const void *fdt = gd->fdt_blob;
+	int node = dev_of_offset(dev);
+
 	fdt_addr_t addr;
 	unsigned int val;
-	struct mmc *mmc;
-#if !CONFIG_IS_ENABLED(BLK)
-	struct blk_desc *bdesc;
-#endif
-	int ret;
 
 	addr = dev_read_addr(dev);
 	if (addr == FDT_ADDR_T_NONE)
@@ -1404,8 +1406,6 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	priv->esdhc_regs = (struct fsl_esdhc *)addr;
 	priv->dev = dev;
 	priv->mode = -1;
-	if (data)
-		priv->flags = data->flags;
 
 	val = dev_read_u32_default(dev, "bus-width", -1);
 	if (val == 8)
@@ -1469,6 +1469,40 @@ static int fsl_esdhc_probe(struct udevice *dev)
 			priv->vs18_enable = 1;
 	}
 #endif
+#endif
+	return 0;
+}
+
+static int fsl_esdhc_probe(struct udevice *dev)
+{
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+	struct esdhc_soc_data *data =
+		(struct esdhc_soc_data *)dev_get_driver_data(dev);
+	struct mmc *mmc;
+#if !CONFIG_IS_ENABLED(BLK)
+	struct blk_desc *bdesc;
+#endif
+	int ret;
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_fsl_esdhc *dtplat = &plat->dtplat;
+	unsigned int val;
+
+	priv->esdhc_regs = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
+	val = plat->dtplat.bus_width;
+	if (val == 8)
+		priv->bus_width = 8;
+	else if (val == 4)
+		priv->bus_width = 4;
+	else
+		priv->bus_width = 1;
+	priv->non_removable = 1;
+#endif
+
+	if (data)
+		priv->flags = data->flags;
 
 	/*
 	 * TODO:
@@ -1520,9 +1554,11 @@ static int fsl_esdhc_probe(struct udevice *dev)
 		return ret;
 	}
 
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
 	ret = mmc_of_parse(dev, &plat->cfg);
 	if (ret)
 		return ret;
+#endif
 
 	mmc = &plat->mmc;
 	mmc->cfg = &plat->cfg;
@@ -1647,6 +1683,7 @@ U_BOOT_DRIVER(fsl_esdhc) = {
 	.name	= "fsl_esdhc",
 	.id	= UCLASS_MMC,
 	.of_match = fsl_esdhc_ids,
+	.ofdata_to_platdata = fsl_esdhc_ofdata_to_platdata,
 	.ops	= &fsl_esdhc_ops,
 #if CONFIG_IS_ENABLED(BLK)
 	.bind	= fsl_esdhc_bind,
@@ -1655,4 +1692,6 @@ U_BOOT_DRIVER(fsl_esdhc) = {
 	.platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat),
 	.priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv),
 };
+
+U_BOOT_DRIVER_ALIAS(fsl_esdhc, fsl_imx6q_usdhc)
 #endif
Signature · 1 line
2.20.1
#4 lore raw

PATCH v3 2/6 mmc: fsl_esdhc_imx: add OF_PLATDATA support

Quoted 6 lines

In order to reduce the footprint of SPL by removing dtb and library overhead, add OF_PLATDATA support to fsl_esdhc_imx. This initial approach does not support card detection, which will be enabled after adding OF_PLATDATA support to GPIO.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#5 lore raw

PATCH v3 3/6 gpio: mxc_gpio: add OF_PLATDATA support

In reply to Walter Lozano

Continuing with the OF_PLATADATA support for iMX6 to reduce SPL footprint, add it to mxc_gpio. Thanks to this, it will be possible to enable card detection on MMC driver.

---

Changes in v3:
- Rework to resolve merge conflicts

 drivers/gpio/mxc_gpio.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)
drivers/gpio/mxc_gpio.c +21 -5
index a16f5719ed..e7585fce7b 100644
@@ -13,6 +13,8 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <dt-structs.h>
+#include <mapmem.h>
 
 enum mxc_gpio_direction {
 	MXC_GPIO_DIRECTION_IN,
@@ -22,6 +24,10 @@ enum mxc_gpio_direction {
 #define GPIO_PER_BANK			32
 
 struct mxc_gpio_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/* Put this first since driver model will copy the data here */
+	struct dtd_gpio_mxc dtplat;
+#endif
 	int bank_index;
 	struct gpio_regs *regs;
 };
@@ -280,6 +286,12 @@ static int mxc_gpio_probe(struct udevice *dev)
 	int banknum;
 	char name[18], *str;
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_gpio_mxc *dtplat = &plat->dtplat;
+
+	plat->regs = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
+#endif
+
 	banknum = plat->bank_index;
 	if (IS_ENABLED(CONFIG_ARCH_IMX8))
 		sprintf(name, "GPIO%d_", banknum);
@@ -297,14 +309,16 @@ static int mxc_gpio_probe(struct udevice *dev)
 
 static int mxc_gpio_ofdata_to_platdata(struct udevice *dev)
 {
-	fdt_addr_t addr;
 	struct mxc_gpio_plat *plat = dev_get_platdata(dev);
+	if (!CONFIG_IS_ENABLED(OF_PLATDATA)) {
+		fdt_addr_t addr;
 
-	addr = dev_read_addr(dev);
-	if (addr == FDT_ADDR_T_NONE)
-		return -EINVAL;
+		addr = dev_read_addr(dev);
+		if (addr == FDT_ADDR_T_NONE)
+			return -EINVAL;
 
-	plat->regs = (struct gpio_regs *)addr;
+		plat->regs = (struct gpio_regs *)addr;
+	}
 	plat->bank_index = dev->req_seq;
 
 	return 0;
@@ -332,6 +346,8 @@ U_BOOT_DRIVER(gpio_mxc) = {
 	.bind	= mxc_gpio_bind,
 };
 
+U_BOOT_DRIVER_ALIAS(gpio_mxc, fsl_imx6q_gpio)
+
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct mxc_gpio_plat mxc_plat[] = {
 	{ 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
Signature · 1 line
2.20.1
#6 lore raw

PATCH v3 3/6 gpio: mxc_gpio: add OF_PLATDATA support

Quoted 4 lines

Continuing with the OF_PLATADATA support for iMX6 to reduce SPL footprint, add it to mxc_gpio. Thanks to this, it will be possible to enable card detection on MMC driver.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#7 lore raw

PATCH v3 4/6 mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled

In reply to Walter Lozano

After enabling OF_PLATDATA support to both MMC and GPIO drivers add the support for card detection.

---

Changes in v3:
- Change #ifdef to if when possible

 drivers/mmc/fsl_esdhc_imx.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)
drivers/mmc/fsl_esdhc_imx.c +24 -1
index 2713682cf7..788677984b 100644
@@ -1498,7 +1498,30 @@ static int fsl_esdhc_probe(struct udevice *dev)
 		priv->bus_width = 4;
 	else
 		priv->bus_width = 1;
-	priv->non_removable = 1;
+
+	if (dtplat->non_removable)
+		priv->non_removable = 1;
+	else
+		priv->non_removable = 0;
+
+	if (CONFIG_IS_ENABLED(DM_GPIO) && !priv->non_removable) {
+		struct udevice *gpiodev;
+		struct driver_info *info;
+
+		info = (struct driver_info *)dtplat->cd_gpios->node;
+
+		ret = device_get_by_driver_info(info, &gpiodev);
+
+		if (ret)
+			return ret;
+
+		ret = gpio_dev_request_index(gpiodev, gpiodev->name, "cd-gpios",
+					     dtplat->cd_gpios->arg[0], GPIOD_IS_IN,
+					     dtplat->cd_gpios->arg[1], &priv->cd_gpio);
+
+		if (ret)
+			return ret;
+	}
 #endif
 
 	if (data)
Signature · 1 line
2.20.1
#8 lore raw

PATCH v3 4/6 mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled

Quoted 4 lines

After enabling OF_PLATDATA support to both MMC and GPIO drivers add the support for card detection.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#9 lore raw

PATCH v3 5/6 drivers: rename more drivers to match compatible string

In reply to Walter Lozano

Continuing with the approach in commit <addf358bac1d2bd0> rename additional drivers to allow the OF_PLATDATA support.

---

(no changes since v1)

 drivers/pinctrl/nxp/pinctrl-imx6.c | 6 ++++--
 drivers/video/imx/mxc_ipuv3_fb.c   | 4 ++--
 2 files changed, 6 insertions(+), 4 deletions(-)
drivers/pinctrl/nxp/pinctrl-imx6.c +4 -2
index aafa3057ad..84004e5921 100644
@@ -41,8 +41,8 @@ static const struct udevice_id imx6_pinctrl_match[] = {
 	{ /* sentinel */ }
 };
 
-U_BOOT_DRIVER(imx6_pinctrl) = {
-	.name = "imx6-pinctrl",
+U_BOOT_DRIVER(fsl_imx6q_iomuxc) = {
+	.name = "fsl_imx6q_iomuxc",
 	.id = UCLASS_PINCTRL,
 	.of_match = of_match_ptr(imx6_pinctrl_match),
 	.probe = imx6_pinctrl_probe,
@@ -51,3 +51,5 @@ U_BOOT_DRIVER(imx6_pinctrl) = {
 	.ops = &imx_pinctrl_ops,
 	.flags = DM_FLAG_PRE_RELOC,
 };
+
+U_BOOT_DRIVER_ALIAS(fsl_imx6q_iomuxc, fsl_imx6dl_iomuxc)
drivers/video/imx/mxc_ipuv3_fb.c +2 -2
index 587d62f2d8..492bc3e829 100644
@@ -660,8 +660,8 @@ static const struct udevice_id ipuv3_video_ids[] = {
 	{ }
 };
 
-U_BOOT_DRIVER(ipuv3_video) = {
-	.name	= "ipuv3_video",
+U_BOOT_DRIVER(fsl_imx6q_ipu) = {
+	.name	= "fsl_imx6q_ipu",
 	.id	= UCLASS_VIDEO,
 	.of_match = ipuv3_video_ids,
 	.bind	= ipuv3_video_bind,
Signature · 1 line
2.20.1
#10 lore raw

PATCH v3 5/6 drivers: rename more drivers to match compatible string

Quoted 4 lines

Continuing with the approach in commit <addf358bac1d2bd0> rename additional drivers to allow the OF_PLATDATA support.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#11 lore raw

PATCH v3 6/6 mx6cuboxi: enable OF_PLATDATA

In reply to Walter Lozano

As both MMC and GPIO driver now supports OF_PLATDATA, enable it in defconfig in order to reduce the SPL footprint. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM.

---

(no changes since v2)

Changes in v2:
- Improve commit message with footprint reduction

 configs/mx6cuboxi_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/mx6cuboxi_defconfig +1 -0
index d2378fa630..9086d6d0da 100644
@@ -42,6 +42,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15"
 CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_OF_PLATDATA=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
Signature · 1 line
2.20.1
#12 lore raw

PATCH v3 6/6 mx6cuboxi: enable OF_PLATDATA

Quoted 6 lines

As both MMC and GPIO driver now supports OF_PLATDATA, enable it in defconfig in order to reduce the SPL footprint. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================