mx6cuboxi: enable OF_PLATDATA with MMC support
Subsystems (7)
v3 cover mx6cuboxi: enable OF_PLATDATA with MMC support
The SPL in iMX6 boards is restricted to 68 KB as this is the free available space in OCRAM for most revisions. In this context, adding OF_CONTROL and DM increases the SPL size which could make it difficult to add specific features required for custom scenarios.
These patches aim to take advantage of OF_PLATADATA in order to reduce the SPL size in this scenario, by parsing DT data to generate platdata structures, and thus removing the overhead caused by DT and related libraries.
This series is focused in MMC driver, which is used for boot in boards such as Cubox-i. Also, in order to support CD, the OF_PLATDATA support is also implemented on GPIO driver.
After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM.
Changes in v3:
- Fix commit message
- Rework to resolve merge conflicts
- Change #ifdef to if when possible
Changes in v2:
- Improve commit message with footprint reduction
Walter Lozano (6):
mmc: fsl_esdhc_imx: rename driver name to match ll_entry
mmc: fsl_esdhc_imx: add OF_PLATDATA support
gpio: mxc_gpio: add OF_PLATDATA support
mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled
drivers: rename more drivers to match compatible string
mx6cuboxi: enable OF_PLATDATA
configs/mx6cuboxi_defconfig | 1 + drivers/gpio/mxc_gpio.c | 26 +++++++-- drivers/mmc/fsl_esdhc_imx.c | 92 +++++++++++++++++++++++++----- drivers/pinctrl/nxp/pinctrl-imx6.c | 6 +- drivers/video/imx/mxc_ipuv3_fb.c | 4 +- 5 files changed, 105 insertions(+), 24 deletions(-)
Signature · 1 line
2.20.1
PATCH v3 1/6 mmc: fsl_esdhc_imx: rename driver name to match ll_entry
As discussed in commit <addf358bac1d2bd0> rename fsl_esdhc_imx driver to allow the OF_PLATDATA support.
---
(no changes since v1)
drivers/mmc/fsl_esdhc_imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/fsl_esdhc_imx.c +1 -1
@@ -1644,7 +1644,7 @@ static int fsl_esdhc_bind(struct udevice *dev)#endif U_BOOT_DRIVER (fsl_esdhc) = { - .name ="fsl-esdhc-mmc" , + .name ="fsl_esdhc" , .id =UCLASS_MMC , .of_match = fsl_esdhc_ids, .ops = &fsl_esdhc_ops,
Signature · 1 line
2.20.1
PATCH v3 1/6 mmc: fsl_esdhc_imx: rename driver name to match ll_entry
Quoted 4 lines
As discussed in commit <
addf358bac1d2bd0> renamefsl_esdhc_imxdriver to allow theOF_PLATDATAsupport.Signed-off-by Walter Lozano <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 2/6 mmc: fsl_esdhc_imx: add OF_PLATDATA support
In reply to Walter LozanoIn order to reduce the footprint of SPL by removing dtb and library overhead, add OF_PLATDATA support to fsl_esdhc_imx. This initial approach does not support card detection, which will be enabled after adding OF_PLATDATA support to GPIO.
---
Changes in v3:
- Fix commit message
drivers/mmc/fsl_esdhc_imx.c | 67 +++++++++++++++++++++++++++++-------- 1 file changed, 53 insertions(+), 14 deletions(-)
drivers/mmc/fsl_esdhc_imx.c +53 -14
@@ -33,6 +33,9 @@#include <dm.h> #include <asm-generic/gpio.h> #include <dm/pinctrl.h> +#include <dt-structs.h> +#include <mapmem.h> +#include <dm/ofnode.h> #if !CONFIG_IS_ENABLED (BLK )#include "mmc_private.h"
@@ -102,6 +105,11 @@ struct fsl_esdhc { };struct fsl_esdhc_plat { +#if CONFIG_IS_ENABLED (OF_PLATDATA ) +/* Put this first since driver model will copy the data here */ +struct dtd_fsl_esdhc dtplat; +#endif +struct mmc_config cfg;struct mmc mmc; };
@@ -1378,25 +1386,19 @@ __weak void init_clk_usdhc(u32 index) { } -static int fsl_esdhc_probe (struct udevice *dev) +static int fsl_esdhc_ofdata_to_platdata (struct udevice *dev) { -struct mmc_uclass_priv *upriv =dev_get_uclass_priv (dev); -struct fsl_esdhc_plat *plat =dev_get_platdata (dev); +#if !CONFIG_IS_ENABLED (OF_PLATDATA )struct fsl_esdhc_priv *priv =dev_get_priv (dev); -const void *fdt = gd->fdt_blob; -int node =dev_of_offset (dev); -struct esdhc_soc_data *data = - (struct esdhc_soc_data *)dev_get_driver_data (dev);#if CONFIG_IS_ENABLED (DM_REGULATOR )struct udevice *vqmmc_dev; +int ret;#endif +const void *fdt = gd->fdt_blob; +int node =dev_of_offset (dev); +fdt_addr_t addr;unsigned int val; -struct mmc *mmc; -#if !CONFIG_IS_ENABLED (BLK ) -struct blk_desc *bdesc; -#endif -int ret; addr =dev_read_addr (dev);if (addr ==FDT_ADDR_T_NONE )
@@ -1404,8 +1406,6 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->esdhc_regs = (struct fsl_esdhc *)addr; priv->dev = dev; priv->mode =-1 ; -if (data) - priv->flags = data->flags; val =dev_read_u32_default (dev,"bus-width" ,-1 );if (val ==8 )
@@ -1469,6 +1469,40 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->vs18_enable =1 ; }#endif +#endif +return 0 ; +} + +static int fsl_esdhc_probe (struct udevice *dev) +{ +struct mmc_uclass_priv *upriv =dev_get_uclass_priv (dev); +struct fsl_esdhc_plat *plat =dev_get_platdata (dev); +struct fsl_esdhc_priv *priv =dev_get_priv (dev); +struct esdhc_soc_data *data = + (struct esdhc_soc_data *)dev_get_driver_data (dev); +struct mmc *mmc; +#if !CONFIG_IS_ENABLED (BLK ) +struct blk_desc *bdesc; +#endif +int ret; + +#if CONFIG_IS_ENABLED (OF_PLATDATA ) +struct dtd_fsl_esdhc *dtplat = &plat->dtplat; +unsigned int val; + + priv->esdhc_regs =map_sysmem (dtplat->reg[0 ], dtplat->reg[1 ]); + val = plat->dtplat.bus_width; +if (val ==8 ) + priv->bus_width =8 ; +else if (val ==4 ) + priv->bus_width =4 ; +else + priv->bus_width =1 ; + priv->non_removable =1 ; +#endif + +if (data) + priv->flags = data->flags;/* * TODO:
@@ -1520,9 +1554,11 @@ static int fsl_esdhc_probe(struct udevice *dev)return ret; } +#if !CONFIG_IS_ENABLED (OF_PLATDATA ) ret =mmc_of_parse (dev, &plat->cfg);if (ret)return ret; +#endif mmc = &plat->mmc; mmc->cfg = &plat->cfg;
@@ -1647,6 +1683,7 @@ U_BOOT_DRIVER(fsl_esdhc) = { .name = "fsl_esdhc", .id = UCLASS_MMC, .of_match = fsl_esdhc_ids, + .ofdata_to_platdata = fsl_esdhc_ofdata_to_platdata, .ops = &fsl_esdhc_ops, #if CONFIG_IS_ENABLED(BLK) .bind = fsl_esdhc_bind,
@@ -1655,4 +1692,6 @@ U_BOOT_DRIVER(fsl_esdhc) = { .platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat), .priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv), }; + +U_BOOT_DRIVER_ALIAS(fsl_esdhc, fsl_imx6q_usdhc)#endif
Signature · 1 line
2.20.1
PATCH v3 2/6 mmc: fsl_esdhc_imx: add OF_PLATDATA support
Quoted 6 lines
In order to reduce the footprint of SPL by removing dtb and library overhead, add
OF_PLATDATAsupport tofsl_esdhc_imx. This initial approach does not support card detection, which will be enabled after addingOF_PLATDATAsupport to GPIO.Signed-off-by Walter Lozano <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 3/6 gpio: mxc_gpio: add OF_PLATDATA support
In reply to Walter LozanoContinuing with the OF_PLATADATA support for iMX6 to reduce SPL footprint, add it to mxc_gpio. Thanks to this, it will be possible to enable card detection on MMC driver.
---
Changes in v3:
- Rework to resolve merge conflicts
drivers/gpio/mxc_gpio.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-)
drivers/gpio/mxc_gpio.c +21 -5
@@ -13,6 +13,8 @@#include <asm/arch/imx-regs.h> #include <asm/gpio.h> #include <asm/io.h> +#include <dt-structs.h> +#include <mapmem.h> enum mxc_gpio_direction {MXC_GPIO_DIRECTION_IN ,
@@ -22,6 +24,10 @@ enum mxc_gpio_direction {#define GPIO_PER_BANK 32struct mxc_gpio_plat { +#if CONFIG_IS_ENABLED (OF_PLATDATA ) +/* Put this first since driver model will copy the data here */ +struct dtd_gpio_mxc dtplat; +#endif int bank_index;struct gpio_regs *regs; };
@@ -280,6 +286,12 @@ static int mxc_gpio_probe(struct udevice *dev)int banknum;char name[18 ], *str; +#if CONFIG_IS_ENABLED (OF_PLATDATA ) +struct dtd_gpio_mxc *dtplat = &plat->dtplat; + + plat->regs =map_sysmem (dtplat->reg[0 ], dtplat->reg[1 ]); +#endif + banknum = plat->bank_index;if (IS_ENABLED (CONFIG_ARCH_IMX8 ))sprintf (name,"GPIO%d_" , banknum);
@@ -297,14 +309,16 @@ static int mxc_gpio_probe(struct udevice *dev)static int mxc_gpio_ofdata_to_platdata (struct udevice *dev) { -fdt_addr_t addr;struct mxc_gpio_plat *plat =dev_get_platdata (dev); +if (!CONFIG_IS_ENABLED (OF_PLATDATA )) { +fdt_addr_t addr; - addr =dev_read_addr (dev); -if (addr ==FDT_ADDR_T_NONE ) -return -EINVAL ; + addr =dev_read_addr (dev); +if (addr ==FDT_ADDR_T_NONE ) +return -EINVAL ; - plat->regs = (struct gpio_regs *)addr; + plat->regs = (struct gpio_regs *)addr; + } plat->bank_index = dev->req_seq;return 0 ;
@@ -332,6 +346,8 @@ U_BOOT_DRIVER(gpio_mxc) = { .bind = mxc_gpio_bind, }; +U_BOOT_DRIVER_ALIAS(gpio_mxc, fsl_imx6q_gpio) +#if !CONFIG_IS_ENABLED (OF_CONTROL )static const struct mxc_gpio_plat mxc_plat[] = { { 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
Signature · 1 line
2.20.1
PATCH v3 3/6 gpio: mxc_gpio: add OF_PLATDATA support
Quoted 4 lines
Continuing with the
OF_PLATADATAsupport for iMX6 to reduce SPL footprint, add it tomxc_gpio. Thanks to this, it will be possible to enable card detection on MMC driver.Signed-off-by Walter Lozano <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 4/6 mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled
In reply to Walter LozanoAfter enabling OF_PLATDATA support to both MMC and GPIO drivers add the support for card detection.
---
Changes in v3:
- Change #ifdef to if when possible
drivers/mmc/fsl_esdhc_imx.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
drivers/mmc/fsl_esdhc_imx.c +24 -1
@@ -1498,7 +1498,30 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->bus_width =4 ; else priv->bus_width = 1; - priv->non_removable =1 ; + +if (dtplat->non_removable) + priv->non_removable =1 ; +else + priv->non_removable =0 ; + +if (CONFIG_IS_ENABLED (DM_GPIO ) && !priv->non_removable) { +struct udevice *gpiodev; +struct driver_info *info; + + info = (struct driver_info *)dtplat->cd_gpios->node; + + ret =device_get_by_driver_info (info, &gpiodev); + +if (ret) +return ret; + + ret =gpio_dev_request_index (gpiodev, gpiodev->name,"cd-gpios" , + dtplat->cd_gpios->arg[0 ],GPIOD_IS_IN , + dtplat->cd_gpios->arg[1 ], &priv->cd_gpio); + +if (ret) +return ret; + }#endif if (data)
Signature · 1 line
2.20.1
PATCH v3 4/6 mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled
Quoted 4 lines
After enabling
OF_PLATDATAsupport to both MMC and GPIO drivers add the support for card detection.Signed-off-by Walter Lozano <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 5/6 drivers: rename more drivers to match compatible string
In reply to Walter LozanoContinuing with the approach in commit <addf358bac1d2bd0> rename additional drivers to allow the OF_PLATDATA support.
---
(no changes since v1)
drivers/pinctrl/nxp/pinctrl-imx6.c | 6 ++++-- drivers/video/imx/mxc_ipuv3_fb.c | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-)
drivers/pinctrl/nxp/pinctrl-imx6.c +4 -2
@@ -41,8 +41,8 @@ static const struct udevice_id imx6_pinctrl_match[] = { {/* sentinel */ } }; -U_BOOT_DRIVER (imx6_pinctrl) = { - .name ="imx6-pinctrl" , +U_BOOT_DRIVER (fsl_imx6q_iomuxc) = { + .name ="fsl_imx6q_iomuxc" , .id =UCLASS_PINCTRL , .of_match =of_match_ptr (imx6_pinctrl_match), .probe = imx6_pinctrl_probe,
@@ -51,3 +51,5 @@ U_BOOT_DRIVER(imx6_pinctrl) = { .ops = &imx_pinctrl_ops, .flags = DM_FLAG_PRE_RELOC, }; + +U_BOOT_DRIVER_ALIAS (fsl_imx6q_iomuxc, fsl_imx6dl_iomuxc)
drivers/video/imx/mxc_ipuv3_fb.c +2 -2
@@ -660,8 +660,8 @@ static const struct udevice_id ipuv3_video_ids[] = { { } }; -U_BOOT_DRIVER (ipuv3_video) = { - .name ="ipuv3_video" , +U_BOOT_DRIVER (fsl_imx6q_ipu) = { + .name ="fsl_imx6q_ipu" , .id =UCLASS_VIDEO , .of_match = ipuv3_video_ids, .bind = ipuv3_video_bind,
Signature · 1 line
2.20.1
PATCH v3 5/6 drivers: rename more drivers to match compatible string
Quoted 4 lines
Continuing with the approach in commit <
addf358bac1d2bd0> rename additional drivers to allow theOF_PLATDATAsupport.Signed-off-by Walter Lozano <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 6/6 mx6cuboxi: enable OF_PLATDATA
In reply to Walter LozanoAs both MMC and GPIO driver now supports OF_PLATDATA, enable it in defconfig in order to reduce the SPL footprint. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM.
---
(no changes since v2)
Changes in v2:
- Improve commit message with footprint reduction
configs/mx6cuboxi_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/mx6cuboxi_defconfig +1 -0
@@ -42,6 +42,7 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15" CONFIG_MULTI_DTB_FIT=y +CONFIG_SPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
Signature · 1 line
2.20.1
PATCH v3 6/6 mx6cuboxi: enable OF_PLATDATA
Quoted 6 lines
As both MMC and GPIO driver now supports
OF_PLATDATA, enable it in defconfig in order to reduce the SPL footprint. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM.Signed-off-by Walter Lozano <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================