media: vidtv: Implement a virtual DVB driver
Subsystems (2)
Daniel W. S. Almeida
maintainerv8 cover media: vidtv: Implement a virtual DVB driver
From: Daniel W. S. Almeida <[email protected]>
This series is work in progress. It represents the current work done on a virtual DVB driver for the Linux media subsystem. I am new to the media subsystem and to kernel development in general.
This driver aims to:
- Serve as template for new DVB driver writers
- Help userspace application writers in general
- Push fake audio/video to userspace for testing purposes
- Push debug information to userspace via debugfs
Current state for this driver:
- Driver is modprobed without any errors on dmesg
- Using dvbv5-scan does not cause the driver to crash
- Driver feeds the demux with TS packets (PSI, PCR, AES3 audio and NULL packets for padding), but the stream is not valid yet.
- Kmemleak shows no leaks. UBSAN & KASAN pick up some bugs
The Virtual Digital TV Driver (vidtv)
Background
----------
Vidtv is a virtual DVB driver that aims to serve as a reference for driver writers by serving as a template. It also validates the existing media DVB APIs, thus helping userspace application writers.
Currently, it consists of:
- A fake tuner driver, which will report a bad signal quality if the chosen frequency is too far away from a table of valid frequencies for a particular delivery system.
- A fake demod driver, which will constantly poll the fake signal quality returned by the tuner, simulating a device that can lose/reacquire a lock on the signal depending on the CNR levels.
- A fake bridge driver, which is the module responsible for modprobing the fake tuner and demod modules and implementing the demux logic. This module takes parameters at initialization that will dictate how the simulation behaves.
- Code reponsible for encoding a valid MPEG Transport Stream, which is then passed to the bridge driver. This fake stream contains some hardcoded content. For now, we have a single, audio-only channel containing a single MPEG Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave. Note that this particular encoder was chosen because it is the easiest way to encode PCM audio data in a MPEG Transport Stream.
Building vidtv
--------------
vidtv is a test driver and thus is **not** enabled by default when compiling the kernel.
In order to enable compilation of vidtv:
- Enable **DVB_TEST_DRIVERS**, then
- Enable **DVB_VIDTV**
When compiled as a module, expect the following .ko files:
- dvb_vidtv_tuner.ko
- dvb_vidtv_demod.ko
- dvb_vidtv_bridge.ko
Running vidtv
-------------
When compiled as a module, run::
modprobe dvb_vidtv_bridge
That's it! The bridge driver will initialize the tuner and demod drivers as part of its own initialization.
You can optionally define some command-line arguments to vidtv, see the documentation for more info.
Testing vidtv with v4l-utils
============================
Start by installing v4l-utils and then modprobing vidtv::
modprobe dvb_vidtv_bridge
If the driver is OK, it should load and its probing code will run. This will pull in the tuner and demod drivers.
Using dvb-fe-tool
-----------------
The first step to check whether the demod loaded successfully is to run::
$ dvb-fe-tool
This should return what is currently set up at the demod struct, i.e.::
static const struct dvb_frontend_ops vidtv_demod_ops = {
.delsys = {
SYS_DVBT,
SYS_DVBT2,
SYS_DVBC_ANNEX_A,
SYS_DVBS,
SYS_DVBS2,
},
.info = {
.name = "Dummy demod for DVB-T/T2/C/S/S2",
.frequency_min_hz = 51 * MHz,
.frequency_max_hz = 2150 * MHz,
.frequency_stepsize_hz = 62500,
.frequency_tolerance_hz = 29500 * kHz,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
.caps = FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_4_5 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_6_7 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_8_9 |
FE_CAN_QAM_16 |
FE_CAN_QAM_64 |
FE_CAN_QAM_32 |
FE_CAN_QAM_128 |
FE_CAN_QAM_256 |
FE_CAN_QAM_AUTO |
FE_CAN_QPSK |
FE_CAN_FEC_AUTO |
FE_CAN_INVERSION_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO,
}
....Using dvb-scan
--------------
In order to tune into a channel and read the PSI tables, we can use dvb-scan.
For this, one should provide a configuration file known as a 'scan file', here's an example::
[Channel]
FREQUENCY = 330000000
MODULATION = QAM/AUTO
SYMBOL_RATE = 6940000
INNER_FEC = AUTO
DELIVERY_SYSTEM = DVBC/ANNEX_A
NOTE:
The parameters depend on the video standard you're testing.
NOTE:
Vidtv is a fake driver and does not validate much of the information in the scan file. Just specifying 'FREQUENCY' and 'DELIVERY_SYSTEM' should be enough for DVB-T/DVB-T2. For DVB-S/DVB-C however, you should also provide 'SYMBOL_RATE'.
Assuming this channel is named 'channel.conf', you can then run::
$ dvbv5-scan dresden_dvbc_channel.conf
Using dvb-zap
-------------
dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The typical use is to tune into a channel and put it into record mode. The example below - which is taken from the documentation - illustrates that::
$ dvbv5-zap -c dvb_channel.conf "trilhas sonoras" -r
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 05: 204
tuning to 573000000 Hz
audio pid 104
dvb_set_pesfilter 104
Lock (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0
DVR interface '/dev/dvb/adapter0/dvr0' can now be openedThe channel can be watched by playing the contents of the DVR interface, with some player that recognizes the MPEG-TS format, such as *mplayer* or *vlc*.
By playing the contents of the stream one can visually inspect the workings of vidtv, e.g.::
$ mplayer /dev/dvb/adapter0/dvr0
Daniel W. S. Almeida (4):
media: vidtv: implement a tuner driver
media: vidtv: implement a demodulator driver
media: vidtv: add a bridge driver
media: Documentation: vidtv: Add ReST documentation for vidtv
.../driver-api/media/drivers/index.rst | 1 + .../driver-api/media/drivers/vidtv.rst | 417 ++++++ MAINTAINERS | 8 + drivers/media/test-drivers/Kconfig | 16 + drivers/media/test-drivers/Makefile | 1 + drivers/media/test-drivers/vidtv/Kconfig | 11 + drivers/media/test-drivers/vidtv/Makefile | 9 + .../media/test-drivers/vidtv/vidtv_bridge.c | 547 ++++++++ .../media/test-drivers/vidtv/vidtv_bridge.h | 60 + .../media/test-drivers/vidtv/vidtv_channel.c | 360 ++++++ .../media/test-drivers/vidtv/vidtv_channel.h | 82 ++ .../media/test-drivers/vidtv/vidtv_common.c | 90 ++ .../media/test-drivers/vidtv/vidtv_common.h | 33 + .../media/test-drivers/vidtv/vidtv_demod.c | 440 +++++++ .../media/test-drivers/vidtv/vidtv_demod.h | 73 ++ .../media/test-drivers/vidtv/vidtv_encoder.h | 99 ++ drivers/media/test-drivers/vidtv/vidtv_mux.c | 454 +++++++ drivers/media/test-drivers/vidtv/vidtv_mux.h | 154 +++ drivers/media/test-drivers/vidtv/vidtv_pes.c | 434 +++++++ drivers/media/test-drivers/vidtv/vidtv_pes.h | 243 ++++ drivers/media/test-drivers/vidtv/vidtv_psi.c | 1131 +++++++++++++++++ drivers/media/test-drivers/vidtv/vidtv_psi.h | 686 ++++++++++ .../media/test-drivers/vidtv/vidtv_s302m.c | 663 ++++++++++ .../media/test-drivers/vidtv/vidtv_s302m.h | 136 ++ drivers/media/test-drivers/vidtv/vidtv_ts.c | 147 +++ drivers/media/test-drivers/vidtv/vidtv_ts.h | 138 ++ .../media/test-drivers/vidtv/vidtv_tuner.c | 427 +++++++ .../media/test-drivers/vidtv/vidtv_tuner.h | 43 + 28 files changed, 6903 insertions(+) create mode 100644 Documentation/driver-api/media/drivers/vidtv.rst create mode 100644 drivers/media/test-drivers/vidtv/Kconfig create mode 100644 drivers/media/test-drivers/vidtv/Makefile create mode 100644 drivers/media/test-drivers/vidtv/vidtv_bridge.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_bridge.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_channel.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_channel.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_common.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_common.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_demod.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_demod.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_encoder.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_mux.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_mux.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_pes.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_pes.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_psi.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_psi.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_s302m.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_s302m.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_ts.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_ts.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_tuner.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_tuner.h
Signature · 1 line
2.27.0
Daniel W. S. Almeida
maintainerPATCH v8 1/4 media: vidtv: implement a tuner driver
From: Daniel W. S. Almeida <[email protected]>
The virtual DVB test driver serves as a reference DVB driver and helps validate the existing APIs in the media subsystem. It can also aid developers working on userspace applications.
This dummy tuner should support common TV standards such as DVB-T/T2/S/S2, ISDB-T and ATSC when completed.
--- MAINTAINERS | 8 + drivers/media/test-drivers/Kconfig | 16 + drivers/media/test-drivers/Makefile | 1 + drivers/media/test-drivers/vidtv/Kconfig | 11 + drivers/media/test-drivers/vidtv/Makefile | 5 + .../media/test-drivers/vidtv/vidtv_tuner.c | 427 ++++++++++++++++++ .../media/test-drivers/vidtv/vidtv_tuner.h | 43 ++ 7 files changed, 511 insertions(+) create mode 100644 drivers/media/test-drivers/vidtv/Kconfig create mode 100644 drivers/media/test-drivers/vidtv/Makefile create mode 100644 drivers/media/test-drivers/vidtv/vidtv_tuner.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_tuner.h
MAINTAINERS +8 -0
@@ -18290,6 +18290,14 @@ W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git F: drivers/media/test-drivers/vivid/* +VIDTV VIRTUAL DIGITAL TV DRIVER +M: Daniel W. S. Almeida <[email protected]> +L: [email protected] +S: Maintained +W: https://linuxtv.org +T: git git://linuxtv.org/media_tree.git +F: drivers/media/test-drivers/vidtv/* + VLYNQ BUS M: Florian Fainelli <[email protected]> L: [email protected] (subscribers-only)
drivers/media/test-drivers/Kconfig +16 -0
@@ -4,6 +4,16 @@ menuconfig V4L_TEST_DRIVERS bool "V4L test drivers" depends on VIDEO_DEV +menuconfig DVB_TEST_DRIVERS + bool "DVB test drivers" + depends on DVB_CORE && MEDIA_SUPPORT && I2C + help + Enables DVB test drivers. + + This enables the DVB test drivers. They are meant as an aid for + DVB device driver writers and developers working on userspace + media applications. + if V4L_TEST_DRIVERS source "drivers/media/test-drivers/vimc/Kconfig"
@@ -24,3 +34,9 @@ config VIDEO_VIM2M source "drivers/media/test-drivers/vicodec/Kconfig" endif #V4L_TEST_DRIVERS + +if DVB_TEST_DRIVERS + +source "drivers/media/test-drivers/vidtv/Kconfig" + +endif #DVB_TEST_DRIVERS
drivers/media/test-drivers/Makefile +1 -0
@@ -7,3 +7,4 @@ obj-$(CONFIG_VIDEO_VIMC) += vimc/ obj-$(CONFIG_VIDEO_VIVID) += vivid/ obj-$(CONFIG_VIDEO_VIM2M) += vim2m.o obj-$(CONFIG_VIDEO_VICODEC) += vicodec/ +obj-$(CONFIG_DVB_VIDTV) += vidtv/
drivers/media/test-drivers/vidtv/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DVB_VIDTV + tristate "Virtual DVB Driver (vidtv)" + depends on DVB_CORE && MEDIA_SUPPORT && I2C + help + The virtual DVB test driver serves as a reference DVB driver and helps + validate the existing APIs in the media subsystem. It can also aid developers + working on userspace applications. + + + When in doubt, say N.
drivers/media/test-drivers/vidtv/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +dvb-vidtv-tuner-objs := vidtv_tuner.o + +obj-$(CONFIG_DVB_VIDTV) += dvb-vidtv-tuner.o
drivers/media/test-drivers/vidtv/vidtv_tuner.c new file +427 -0
427 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_tuner.h new file +43 -0
43 lines not on this page · raw message
Signature · 6 lines
2.27.0 _______________________________________________ Linux-kernel-mentees mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees
Daniel W. S. Almeida
maintainerPATCH v8 2/4 media: vidtv: implement a demodulator driver
In reply to Daniel W. S. AlmeidaFrom: Daniel W. S. Almeida <[email protected]>
Implement a I2C demodulator driver, simulating support for DVB-T, DVB-C and DVB-S.
This demodulator will periodically check the signal quality against a table and drop the TS lock if it drops below a threshold value, regaining it in the event that the signal improves.
--- drivers/media/test-drivers/vidtv/Makefile | 3 +- .../media/test-drivers/vidtv/vidtv_demod.c | 440 ++++++++++++++++++ .../media/test-drivers/vidtv/vidtv_demod.h | 73 +++ 3 files changed, 515 insertions(+), 1 deletion(-) create mode 100644 drivers/media/test-drivers/vidtv/vidtv_demod.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_demod.h
drivers/media/test-drivers/vidtv/Makefile +2 -1
@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dvb-vidtv-tuner-objs := vidtv_tuner.o +dvb-vidtv-demod-objs := vidtv_demod.o -obj-$(CONFIG_DVB_VIDTV) += dvb-vidtv-tuner.o +obj-$(CONFIG_DVB_VIDTV) += dvb-vidtv-tuner.o dvb-vidtv-demod.o
drivers/media/test-drivers/vidtv/vidtv_demod.c new file +440 -0
440 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_demod.h new file +73 -0
73 lines not on this page · raw message
Signature · 1 line
2.27.0
Daniel W. S. Almeida
maintainerPATCH v8 3/4 media: vidtv: add a bridge driver
In reply to Daniel W. S. AlmeidaFrom: Daniel W. S. Almeida <[email protected]>
Digital TV devices consist of several independent hardware components which are controlled by different drivers.
Each media device is controlled by a group of cooperating drivers with the bridge driver as the main driver.
This patch adds a bridge driver for the Virtual Digital TV driver [vidtv].
The bridge driver binds to the other drivers, that is, vidtv_tuner and vidtv_demod and implements the digital demux logic, providing userspace with a MPEG Transport Stream.
The MPEG related code is split in the following way:
- vidtv_ts: code to work with MPEG TS packets, such as TS headers, adaptation fields, PCR packets and NULL packets.
- vidtv_psi: this is the PSI generator.
PSI packets contain general information about a MPEG Transport Stream. A PSI generator is needed so userspace apps can retrieve information about the Transport Stream and eventually tune into a (dummy) channel.
Because the generator is implemented in a separate file, it can be reused elsewhere in the media subsystem.
Currently vidtv supports working with 3 PSI tables:
PAT, PMT and SDT.
- vidtv_pes: implements the PES logic to convert encoder data into MPEG TS packets. These can then be fed into a TS multiplexer and eventually into userspace.
- vidtv_s302m: implements a S302M encoder to make it possible to insert PCM audio data in the generated MPEG Transport Stream.
This shall enable passing an audio signal into userspace so it can be decoded and played by media software.
- vidtv_channels: Implements a 'channel' abstraction
When vidtv boots, it will create some hardcoded channels:
Their services will be concatenated to populate the SDT. Their programs will be concatenated to populate the PAT For each program in the PAT, a PMT section will be created The PMT section for a channel will be assigned its streams. Every stream will have its corresponding encoder polled to produce TS packets
These packets may be interleaved by the mux and then delivered to the bridge
- vidtv_mux - Implements a MPEG TS mux, loosely based on the ffmpeg implementation
The multiplexer is responsible for polling encoders, interleaving packets, padding the resulting stream with NULL packets if necessary and then delivering the resulting TS packets to the bridge driver so it can feed the demux.
--- drivers/media/test-drivers/vidtv/Makefile | 5 +- .../media/test-drivers/vidtv/vidtv_bridge.c | 547 ++++++++ .../media/test-drivers/vidtv/vidtv_bridge.h | 60 + .../media/test-drivers/vidtv/vidtv_channel.c | 360 ++++++ .../media/test-drivers/vidtv/vidtv_channel.h | 82 ++ .../media/test-drivers/vidtv/vidtv_common.c | 90 ++ .../media/test-drivers/vidtv/vidtv_common.h | 33 + .../media/test-drivers/vidtv/vidtv_encoder.h | 99 ++ drivers/media/test-drivers/vidtv/vidtv_mux.c | 454 +++++++ drivers/media/test-drivers/vidtv/vidtv_mux.h | 154 +++ drivers/media/test-drivers/vidtv/vidtv_pes.c | 434 +++++++ drivers/media/test-drivers/vidtv/vidtv_pes.h | 243 ++++ drivers/media/test-drivers/vidtv/vidtv_psi.c | 1131 +++++++++++++++++ drivers/media/test-drivers/vidtv/vidtv_psi.h | 686 ++++++++++ .../media/test-drivers/vidtv/vidtv_s302m.c | 663 ++++++++++ .../media/test-drivers/vidtv/vidtv_s302m.h | 136 ++ drivers/media/test-drivers/vidtv/vidtv_ts.c | 147 +++ drivers/media/test-drivers/vidtv/vidtv_ts.h | 138 ++ 18 files changed, 5461 insertions(+), 1 deletion(-) create mode 100644 drivers/media/test-drivers/vidtv/vidtv_bridge.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_bridge.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_channel.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_channel.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_common.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_common.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_encoder.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_mux.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_mux.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_pes.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_pes.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_psi.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_psi.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_s302m.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_s302m.h create mode 100644 drivers/media/test-drivers/vidtv/vidtv_ts.c create mode 100644 drivers/media/test-drivers/vidtv/vidtv_ts.h
drivers/media/test-drivers/vidtv/Makefile +4 -1
@@ -2,5 +2,8 @@ dvb-vidtv-tuner-objs := vidtv_tuner.o dvb-vidtv-demod-objs := vidtv_demod.o +dvb-vidtv-bridge-objs := vidtv_bridge.o vidtv_common.o vidtv_ts.o vidtv_psi.o \ + vidtv_pes.o vidtv_s302m.o vidtv_channel.o vidtv_mux.o -obj-$(CONFIG_DVB_VIDTV) += dvb-vidtv-tuner.o dvb-vidtv-demod.o +obj-$(CONFIG_DVB_VIDTV) += dvb-vidtv-tuner.o dvb-vidtv-demod.o \ + dvb-vidtv-bridge.o
drivers/media/test-drivers/vidtv/vidtv_bridge.c new file +547 -0
547 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_bridge.h new file +60 -0
60 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_channel.c new file +360 -0
360 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_channel.h new file +82 -0
82 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_common.c new file +90 -0
90 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_common.h new file +33 -0
@@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* The Virtual DVB test driver serves as a reference DVB driver and helps +* validate the existing APIs in the media subsystem. It can also aid +* developers working on userspace applications. +* +* Copyright (C) 2020 Daniel W. S. Almeida +*/ + +#ifndef VIDTV_COMMON_H +#define VIDTV_COMMON_H + +#include <linux/types.h> + +#define CLOCK_UNIT_90KHZ 90000 +#define CLOCK_UNIT_27MHZ 27000000 +#define VIDTV_SLEEP_USECS 10000 +#define VIDTV_MAX_SLEEP_USECS (2 * VIDTV_SLEEP_USECS) +#define TRANSPORT_STREAM_ID 0x744 + +u32 vidtv_memcpy (void *to, +size_t to_offset, +size_t to_size, +const void *from, +size_t len); + +u32 vidtv_memset (void *to, +size_t to_offset, +size_t to_size, +int c, +size_t len); + +#endif // VIDTV_COMMON_H
drivers/media/test-drivers/vidtv/vidtv_encoder.h new file +99 -0
99 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_mux.c new file +454 -0
454 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_mux.h new file +154 -0
154 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_pes.c new file +434 -0
434 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_pes.h new file +243 -0
243 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_psi.c new file +1131 -0
435 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_psi.h new file +686 -0
686 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_s302m.c new file +663 -0
663 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_s302m.h new file +136 -0
136 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_ts.c new file +147 -0
147 lines not on this page · raw message
drivers/media/test-drivers/vidtv/vidtv_ts.h new file +138 -0
138 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.27.0
Part of the diff is not shown here. View the raw message.
Daniel W. S. Almeida
maintainerPATCH v8 4/4 media: Documentation: vidtv: Add ReST documentation for vidtv
In reply to Daniel W. S. AlmeidaFrom: Daniel W. S. Almeida <[email protected]>
Add documentation for the Virtual Digital TV driver (vidtv) in the Restructured Text (ReST) format.
This discusses:
- What is vidtv
- Why vidtv is needed
- How to build and run vidtv
- How vidtv is structured
- How to test vidtv
- How to improve vidtv
--- .../driver-api/media/drivers/index.rst | 1 + .../driver-api/media/drivers/vidtv.rst | 417 ++++++++++++++++++ 2 files changed, 418 insertions(+) create mode 100644 Documentation/driver-api/media/drivers/vidtv.rst
Documentation/driver-api/media/drivers/index.rst +1 -0
@@ -35,4 +35,5 @@ Digital TV drivers dvb-usb frontends + vidtv contributors
Documentation/driver-api/media/drivers/vidtv.rst new file +417 -0
417 lines not on this page · raw message
Signature · 6 lines
2.27.0 _______________________________________________ Linux-kernel-mentees mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees