Skip to content

media: vidtv: Implement a virtual DVB driver

Daniel W. S. Almeida linux-kernel-mentees linux-media lkml 10 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v10 Latest4 patches 18 repliesIn review
  2. v94 patches 0 repliesSuperseded
  3. v84 patches 0 repliesSuperseded
Earlier versions · 7
VersionPostedPatchesRepliesStatus
v7 RFC4 patches2 repliesSuperseded
v6 RFC10 patches8 repliesSuperseded
v5 RFC10 patches0 repliesSuperseded
v4 RFC11 patches21 repliesSuperseded
v3 RFC6 patches0 repliesSuperseded
v2 RFC3 patches7 repliesSuperseded
v1 RFC3 patches5 repliesSuperseded

Changes in v10 from the cover letter

s302m encoder got reworked

Patches in v10 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4media: vidtv: implement a tuner driverMAINTAINERS drivers/media/test-drivers/Kconfig drivers/media/test-drivers/Makefile +4 more+511 -00 replies
2/4media: vidtv: implement a demodulator driverdrivers/media/test-drivers/vidtv/Makefile drivers/media/test-drivers/vidtv/vidtv_demod.c drivers/media/test-drivers/vidtv/vidtv_demod.h+515 -10 replies
3/4media: vidtv: add a bridge driverdrivers/media/test-drivers/vidtv/Makefile drivers/media/test-drivers/vidtv/vidtv_bridge.c drivers/media/test-drivers/vidtv/vidtv_bridge.h +15 more+5290 -16 replies
4/4media: Documentation: vidtv: Add ReST documentation for vidtvDocumentation/driver-api/media/drivers/index.rst Documentation/driver-api/media/drivers/vidtv.rst+418 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v10 yet.

Read the v10 thread

Cover letter [v10 0/4] media: vidtv: Implement a virtual DVB driver

From: "Daniel W. S. Almeida" <[email protected]>

This series is work in progress. It represents the current work done on a virtual DVB driver for the Linux media subsystem. I am new to the media subsystem and to kernel development in general.

This driver aims to:
- Serve as template for new DVB driver writers
- Help userspace application writers in general
- Push fake audio/video to userspace for testing purposes
- Push debug information to userspace via debugfs

Current state for this driver:
- Driver generates PSI information (PAT, PMT, SDT)
- Driver generates PCR packets
- Driver generates NULL packets for padding
- PCM audio stream is decoded by ffmpeg, but no audio is heard yet.

changes in v10:
s302m encoder got reworked

The Virtual Digital TV Driver (vidtv)

Background
----------

Vidtv is a virtual DVB driver that aims to serve as a reference for driver writers by serving as a template. It also validates the existing media DVB APIs, thus helping userspace application writers.

Currently, it consists of:

- A fake tuner driver, which will report a bad signal quality if the chosen frequency is too far away from a table of valid frequencies for a particular delivery system.

- A fake demod driver, which will constantly poll the fake signal quality returned by the tuner, simulating a device that can lose/reacquire a lock on the signal depending on the CNR levels.

- A fake bridge driver, which is the module responsible for modprobing the fake tuner and demod modules and implementing the demux logic. This module takes parameters at initialization that will dictate how the simulation behaves.

- Code reponsible for encoding a valid MPEG Transport Stream, which is then passed to the bridge driver. This fake stream contains some hardcoded content. For now, we have a single, audio-only channel containing a single MPEG Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave. Note that this particular encoder was chosen because it is the easiest way to encode PCM audio data in a MPEG Transport Stream.

Building vidtv
--------------
vidtv is a test driver and thus is **not** enabled by default when compiling the kernel.

In order to enable compilation of vidtv:

- Enable **DVB_TEST_DRIVERS**, then
- Enable **DVB_VIDTV**

When compiled as a module, expect the following .ko files:

- dvb_vidtv_tuner.ko

- dvb_vidtv_demod.ko

- dvb_vidtv_bridge.ko

Running vidtv
-------------
When compiled as a module, run::

modprobe dvb_vidtv_bridge

That's it! The bridge driver will initialize the tuner and demod drivers as part of its own initialization.

You can optionally define some command-line arguments to vidtv, see the documentation for more info.

Testing vidtv with v4l-utils
============================

Start by installing v4l-utils and then modprobing vidtv::

modprobe dvb_vidtv_bridge

If the driver is OK, it should load and its probing code will run. This will pull in the tuner and demod drivers.

Using dvb-fe-tool
-----------------

The first step to check whether the demod loaded successfully is to run::

	$ dvb-fe-tool

This should return what is currently set up at the demod struct, i.e.::

	static const struct dvb_frontend_ops vidtv_demod_ops = {
		.delsys = {
			SYS_DVBT,
			SYS_DVBT2,
			SYS_DVBC_ANNEX_A,
			SYS_DVBS,
			SYS_DVBS2,
		},

		.info = {
			.name                   = "Dummy demod for DVB-T/T2/C/S/S2",
			.frequency_min_hz       = 51 * MHz,
			.frequency_max_hz       = 2150 * MHz,
			.frequency_stepsize_hz  = 62500,
			.frequency_tolerance_hz = 29500 * kHz,
			.symbol_rate_min        = 1000000,
			.symbol_rate_max        = 45000000,

			.caps = FE_CAN_FEC_1_2 |
				FE_CAN_FEC_2_3 |
				FE_CAN_FEC_3_4 |
				FE_CAN_FEC_4_5 |
				FE_CAN_FEC_5_6 |
				FE_CAN_FEC_6_7 |
				FE_CAN_FEC_7_8 |
				FE_CAN_FEC_8_9 |
				FE_CAN_QAM_16 |
				FE_CAN_QAM_64 |
				FE_CAN_QAM_32 |
				FE_CAN_QAM_128 |
				FE_CAN_QAM_256 |
				FE_CAN_QAM_AUTO |
				FE_CAN_QPSK |
				FE_CAN_FEC_AUTO |
				FE_CAN_INVERSION_AUTO |
				FE_CAN_TRANSMISSION_MODE_AUTO |
				FE_CAN_GUARD_INTERVAL_AUTO |
				FE_CAN_HIERARCHY_AUTO,
		}

		....

Using dvb-scan
--------------

In order to tune into a channel and read the PSI tables, we can use dvb-scan.

For this, one should provide a configuration file known as a 'scan file', here's an example::

[Channel]
FREQUENCY = 330000000
MODULATION = QAM/AUTO
SYMBOL_RATE = 6940000
INNER_FEC = AUTO
DELIVERY_SYSTEM = DVBC/ANNEX_A

NOTE:
The parameters depend on the video standard you're testing.

NOTE:
Vidtv is a fake driver and does not validate much of the information in the scan file. Just specifying 'FREQUENCY' and 'DELIVERY_SYSTEM' should be enough for DVB-T/DVB-T2. For DVB-S/DVB-C however, you should also provide 'SYMBOL_RATE'.

Assuming this channel is named 'channel.conf', you can then run::

        $ dvbv5-scan dresden_dvbc_channel.conf

Using dvb-zap
-------------

dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The typical use is to tune into a channel and put it into record mode. The example below - which is taken from the documentation - illustrates that::

        $ dvbv5-zap -c dvb_channel.conf "trilhas sonoras" -r
        using demux '/dev/dvb/adapter0/demux0'
        reading channels from file 'dvb_channel.conf'
        service has pid type 05:  204
        tuning to 573000000 Hz
        audio pid 104
          dvb_set_pesfilter 104
        Lock   (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0
        DVR interface '/dev/dvb/adapter0/dvr0' can now be opened

The channel can be watched by playing the contents of the DVR interface, with some player that recognizes the MPEG-TS format, such as *mplayer* or *vlc*.

By playing the contents of the stream one can visually inspect the workings of vidtv, e.g.::

	$ mplayer /dev/dvb/adapter0/dvr0

Daniel W. S. Almeida (4):
media: vidtv: implement a tuner driver
media: vidtv: implement a demodulator driver
media: vidtv: add a bridge driver
media: Documentation: vidtv: Add ReST documentation for vidtv

 .../driver-api/media/drivers/index.rst        |    1 +
 .../driver-api/media/drivers/vidtv.rst        |  417 +++++
 MAINTAINERS                                   |    8 +
 drivers/media/test-drivers/Kconfig            |   16 +
 drivers/media/test-drivers/Makefile           |    1 +
 drivers/media/test-drivers/vidtv/Kconfig      |   11 +
 drivers/media/test-drivers/vidtv/Makefile     |    9 +
 .../media/test-drivers/vidtv/vidtv_bridge.c   |  546 +++++++
 .../media/test-drivers/vidtv/vidtv_bridge.h   |   60 +
 .../media/test-drivers/vidtv/vidtv_channel.c  |  306 ++++
 .../media/test-drivers/vidtv/vidtv_channel.h  |   76 +
 .../media/test-drivers/vidtv/vidtv_common.c   |   89 ++
 .../media/test-drivers/vidtv/vidtv_common.h   |   33 +
 .../media/test-drivers/vidtv/vidtv_demod.c    |  440 ++++++
 .../media/test-drivers/vidtv/vidtv_demod.h    |   73 +
 .../media/test-drivers/vidtv/vidtv_encoder.h  |   96 ++
 drivers/media/test-drivers/vidtv/vidtv_mux.c  |  479 ++++++
 drivers/media/test-drivers/vidtv/vidtv_mux.h  |  160 ++
 drivers/media/test-drivers/vidtv/vidtv_pes.c  |  398 +++++
 drivers/media/test-drivers/vidtv/vidtv_pes.h  |  189 +++
 drivers/media/test-drivers/vidtv/vidtv_psi.c  | 1352 +++++++++++++++++
 drivers/media/test-drivers/vidtv/vidtv_psi.h  |  593 ++++++++
 .../media/test-drivers/vidtv/vidtv_s302m.c    |  552 +++++++
 .../media/test-drivers/vidtv/vidtv_s302m.h    |   90 ++
 drivers/media/test-drivers/vidtv/vidtv_ts.c   |  137 ++
 drivers/media/test-drivers/vidtv/vidtv_ts.h   |  130 ++
 .../media/test-drivers/vidtv/vidtv_tuner.c    |  427 ++++++
 .../media/test-drivers/vidtv/vidtv_tuner.h    |   43 +
 28 files changed, 6732 insertions(+)
 create mode 100644 Documentation/driver-api/media/drivers/vidtv.rst
 create mode 100644 drivers/media/test-drivers/vidtv/Kconfig
 create mode 100644 drivers/media/test-drivers/vidtv/Makefile
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_bridge.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_bridge.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_channel.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_channel.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_common.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_common.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_demod.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_demod.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_encoder.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_mux.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_mux.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_pes.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_pes.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_psi.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_psi.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_s302m.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_s302m.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_ts.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_ts.h
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_tuner.c
 create mode 100644 drivers/media/test-drivers/vidtv/vidtv_tuner.h
Signature · 1 line
2.28.0