Skip to contentSkip to conversation

Help to test the powerpc architecture

DISCUSSION Oscar Carter 3 participants 3 messages Aug 2, 2020 – Aug 11, 2020

lore
Share & tools
lore
#0 lore raw

Hi,

I'm working in a new feature for the powerpc (64 bits little endian) architecture. Since I can't test it in a real environment, I need to emulate this arch. To do this I use qemu-ppc. My problem is that the built kernel don't boot in qemu.

To build the kernel:

make defconfig ARCH=powerpc

Then I set to NO the CONFIG_KEXEC option as I found that qemu can't boot a KEXEC kernel. And now:

make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- -j4

Finally I obtain a zImage in arch/powerpc/boot/ directory.

Before to run qemu I create a rootfs with debootstrap. Then I run qemu with the following parameters:

qemu-system-ppc -kernel /media/ubuntu/Data/linux/arch/powerpc/boot/zImage \
		-append "root=/dev/sda console=ttyS0" \
		-drive file=qemu_image.img,index=0,media=disk,format=raw \
		--nographic

If I add the "-prom-env boot-args=-v" to the end of the last command I get the same result. The qemu always stops at this point:

Quoted 7 lines
Quoted 7 lines

=============================================================
OpenBIOS 1.1 [Dec 27 2018 23:11] Configuration device id QEMU version 1 machine id 2
CPUs: 1
Memory: 128M
UUID: 00000000-0000-0000-0000-000000000000 CPU type PowerPC,750

milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Dec 27 2018 23:11

Quoted 3 lines
Quoted 3 lines

[ppc] Kernel already loaded (0x01000000 + 0x009085d8) (initrd 0x00000000 + 0x00000000) [ppc] Kernel command line: root=/dev/sda console=ttyS0
switching to new context:

Also, I've tried to build the kernel with a DTB embedded in the image, but not luck. The same result again.

make ps3_defconfig ARCH=powerpc
make ARCH=powerpc simpleImage.ps3 CROSS_COMPILE=powerpc-linux-gnu- -j4

I'm stuck at this point. I don't know how to configure the kernel to be able to boot with qemu. Any help to point me to the right direction will be greatly appreciated.

Thank's in advance.
Oscar Carter

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

#1 lore raw
Quoted 47 lines · IST Oscar Carter

Hi,

I'm working in a new feature for the powerpc (64 bits little endian) architecture. Since I can't test it in a real environment, I need to emulate this arch. To do this I use qemu-ppc. My problem is that the built kernel don't boot in qemu.

To build the kernel:

make defconfig ARCH=powerpc

Then I set to NO the CONFIG_KEXEC option as I found that qemu can't boot a KEXEC kernel. And now:

make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- -j4

Finally I obtain a zImage in arch/powerpc/boot/ directory.

Before to run qemu I create a rootfs with debootstrap. Then I run qemu with the following parameters:

qemu-system-ppc -kernel /media/ubuntu/Data/linux/arch/powerpc/boot/zImage \
		-append "root=/dev/sda console=ttyS0" \
		-drive file=qemu_image.img,index=0,media=disk,format=raw \
		--nographic

If I add the "-prom-env boot-args=-v" to the end of the last command I get

the same result. The qemu always stops at this point:

Quoted 7 lines
Quoted 7 lines

=============================================================
OpenBIOS 1.1 [Dec 27 2018 23:11] Configuration device id QEMU version 1 machine id 2
CPUs: 1
Memory: 128M
UUID: 00000000-0000-0000-0000-000000000000 CPU type PowerPC,750

milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Dec 27 2018 23:11

Quoted 4 lines
Quoted 4 lines

[ppc] Kernel already loaded (0x01000000 + 0x009085d8) (initrd 0x00000000
+ 0x00000000) [ppc] Kernel command line: root=/dev/sda console=ttyS0

switching to new context:

Also, I've tried to build the kernel with a DTB embedded in the image, but not luck. The same result again.

Quoted 6 lines

make ps3_defconfig ARCH=powerpc
make ARCH=powerpc simpleImage.ps3 CROSS_COMPILE=powerpc-linux-gnu- -j4

I'm stuck at this point. I don't know how to configure the kernel to be able to boot with qemu. Any help to point me to the right direction will be greatly appreciated.

I used pseries_defconfig and have also used pseries_le_defconfig and have done successful boots. You should probably give the machine type in your qemu command line.

-M pseries

or whatever is the machine type is for ps3

Thanks,
Santosh

Quoted 8 lines

Thank's in advance.
Oscar Carter

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

#2 lore raw
Quoted 11 lines · Santosh S
Quoted 9 lines · IST Oscar Carter

Hi,

I'm working in a new feature for the powerpc (64 bits little endian) architecture. Since I can't test it in a real environment, I need to emulate this arch. To do this I use qemu-ppc. My problem is that the built kernel don't boot in qemu.

To build the kernel:

I would recommend you try virtme, particularly virtme-config-kernel

[jimc@frodo build-v1]$ virtme-configkernel --help
usage: virtme-configkernel [-h] [--arch ARCHITECTURE] [--allnoconfig | --defconfig | --update]

Configure a kernel for virtme

optional arguments:
-h, --help show this help message and exit
--arch ARCHITECTURE Target architecture

Mode:
--allnoconfig Overwrite configuration with a virtme-suitable
allnoconfig (unlikely to work)
--defconfig Overwrite configuration with a virtme-suitable defconfig
--update Update existing config for virtme

Quoted 65 lines
Quoted 38 lines

make defconfig ARCH=powerpc

Then I set to NO the CONFIG_KEXEC option as I found that qemu can't boot a KEXEC kernel. And now:

make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- -j4

Finally I obtain a zImage in arch/powerpc/boot/ directory.

Before to run qemu I create a rootfs with debootstrap. Then I run qemu with the following parameters:

qemu-system-ppc -kernel /media/ubuntu/Data/linux/arch/powerpc/boot/zImage \
              -append "root=/dev/sda console=ttyS0" \
              -drive file=qemu_image.img,index=0,media=disk,format=raw \
              --nographic

If I add the "-prom-env boot-args=-v" to the end of the last command I get

the same result. The qemu always stops at this point:

Quoted 7 lines
Quoted 7 lines

=============================================================
OpenBIOS 1.1 [Dec 27 2018 23:11] Configuration device id QEMU version 1 machine id 2
CPUs: 1
Memory: 128M
UUID: 00000000-0000-0000-0000-000000000000 CPU type PowerPC,750

milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Dec 27 2018 23:11

Quoted 4 lines
Quoted 4 lines

[ppc] Kernel already loaded (0x01000000 + 0x009085d8) (initrd 0x00000000
+ 0x00000000) [ppc] Kernel command line: root=/dev/sda console=ttyS0

switching to new context:

Also, I've tried to build the kernel with a DTB embedded in the image, but not luck. The same result again.

Quoted 6 lines

make ps3_defconfig ARCH=powerpc
make ARCH=powerpc simpleImage.ps3 CROSS_COMPILE=powerpc-linux-gnu- -j4

I'm stuck at this point. I don't know how to configure the kernel to be able to boot with qemu. Any help to point me to the right direction will be greatly appreciated.

I used pseries_defconfig and have also used pseries_le_defconfig and have done successful boots. You should probably give the machine type in your qemu command line.

-M pseries

or whatever is the machine type is for ps3

Thanks,
Santosh

Quoted 8 lines

Thank's in advance.
Oscar Carter

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Quoted 4 lines

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies