dt-bindings: mediatek: add mt7623 display-nodes

index b91e709db7a4..121220745d46 100644
@@ -43,7 +43,7 @@ Required properties (all function blocks):
 	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
 	"mediatek,<chip>-disp-mutex" 		- display mutex
 	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt2712 and mt8173.
+  the supported chips are mt2701, mt7623, mt2712 and mt8173.
 - reg: Physical base address and length of the function block register space
 - interrupts: The interrupt signal from the function block (required, except for
   merge and split function blocks).

index 77def4456706..dc1ebd13cc88 100644
@@ -7,7 +7,7 @@ output bus.
 
 Required properties:
 - compatible: "mediatek,<chip>-dpi"
-  the supported chips are mt2701 , mt8173 and mt8183.
+  the supported chips are mt2701, mt7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks

index 8e4729de8c85..f06f24d405a5 100644
@@ -7,7 +7,7 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-  the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks

@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
 
 Required properties:
 - compatible: "mediatek,<chip>-mipi-tx"
-  the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - clocks: PLL reference clock
 - clock-output-names: name of the output clock line to the DSI encoder

index 7b124242b0c5..6b1c586403e4 100644
@@ -6,6 +6,7 @@ its parallel input.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks

@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clock

@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - clocks: device clock
 - clock-names: Should be "ddc-i2c".

@@ -56,6 +59,7 @@ output and drives the HDMI pads.
 
 Required properties:
 - compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
 - reg: Physical base address and length of the module's registers
 - clocks: PLL reference clock
 - clock-names: must contain "pll_ref"