Skip to contentSkip to conversation

iio: light: Support AMS AS73211 digital XYZ sensor

PATCH In review Christian Eggers 5 participants 20 messages Aug 5, 2020 – Sep 9, 2020

Subsystems (3)
lore
Share & tools
lore

Christian Eggers

author maintainer
#0 lore raw

v6 cover iio: light: Support AMS AS73211 digital XYZ sensor

This series adds support for the AMS AS73211 digital XYZ sensor.

Probably everything is fine now...

Changes in v6:
---------------
- [2/2] Fixed remaining open points reported by Andy Shevchenko.

Changes in v5:
---------------
- [1/2] Reviewed by Rob Herring
- [2/2] Added KHZ_PER_HR define
- [2/2] Added AS73211_SAMPLE_FREQ_BASE define
- [2/2] Slight changes in comments
- [2/2] Claim direct mode in write_raw()
- [2/2] Saturate only in case of overflow
- [2/2] Don't set indio_dev->dev.parent
- [2/2] Fix error path (order) in probe()

Changes in v4:
---------------
- Integrated 2nd review from Andy Shevchenko
- Use more devm_ functions in as73211_probe()

Changes in v3:
---------------
- Integrated comments from Andy Shevchenko
- Integrated comments from Jonathan Cameron

Changes in v2:
---------------
- Fix $id in dt binding
- Document full I2C address range in "reg" property
- Move "buffer" member out of "struct as73211_data"
- Fix sparse warnings by using correct data types

author maintainer
#1 lore raw

PATCH v6 1/2 dt-bindings: iio: light: add AMS AS73211 support

Add DT bindings for AMS AS73211 XYZ True Color Sensor.

---
 .../bindings/iio/light/ams,as73211.yaml       | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
Documentation/devicetree/bindings/iio/light/ams,as73211.yaml new file +54 -0
new file mode 100644
index 000000000000..0e8cd02759b3
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+
+maintainers:
+  - Christian Eggers <[email protected]>
+
+description: |
+  XYZ True Color Sensor with I2C Interface
+  https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+
+properties:
+  compatible:
+    enum:
+      - ams,as73211
+
+  reg:
+    description:
+      I2C address of the device (0x74...0x77).
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt specifier for the READY interrupt generated by the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        as73211@74 {
+            compatible = "ams,as73211";
+            reg = <0x74>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_color_sensor>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
+        };
+    };
+...
Signature · 8 lines
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
maintainer
#2 lore raw

Re: [PATCH v6 1/2] dt-bindings: iio: light: add AMS AS73211 support

Quoted 4 lines · On Wed, 5 Aug 2020 07:57:43 +0200 Christian Eggers <[email protected]> wrote:

Add DT bindings for AMS AS73211 XYZ True Color Sensor.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it.

Thanks,

Jonathan

Quoted 65 lines
---
 .../bindings/iio/light/ams,as73211.yaml       | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
Documentation/devicetree/bindings/iio/light/ams,as73211.yaml new file +54 -0
new file mode 100644
index 000000000000..0e8cd02759b3
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+
+maintainers:
+  - Christian Eggers <[email protected]>
+
+description: |
+  XYZ True Color Sensor with I2C Interface
+  https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+
+properties:
+  compatible:
+    enum:
+      - ams,as73211
+
+  reg:
+    description:
+      I2C address of the device (0x74...0x77).
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt specifier for the READY interrupt generated by the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        as73211@74 {
+            compatible = "ams,as73211";
+            reg = <0x74>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_color_sensor>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
+        };
+    };
+...
author maintainer
#3 lore raw

PATCH v6 2/2 iio: light: as73211: New driver

In reply to Christian Eggers

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered measurements, an external (software) trigger driver like iio-trig-hrtimer or iio-trig-sysfs is required.

The sensor supports single and continuous measurement modes. The latter is not used by design as this would require tight timing synchronization between hardware and driver without much benefit.

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf

---
 MAINTAINERS                 |   7 +
 drivers/iio/light/Kconfig   |  15 +
 drivers/iio/light/Makefile  |   1 +
 drivers/iio/light/as73211.c | 801 ++++++++++++++++++++++++++++++++++++
 4 files changed, 824 insertions(+)
 create mode 100644 drivers/iio/light/as73211.c
MAINTAINERS +7 -0
index 068d6e94122b..673570414147 100644
@@ -934,6 +934,13 @@ S:	Supported
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:	drivers/net/ethernet/amd/xgbe/
 
+AMS AS73211 DRIVER
+M:	Christian Eggers <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+F:	drivers/iio/light/as73211.c
+
 ANALOG DEVICES INC AD5686 DRIVER
 M:	Michael Hennerich <[email protected]>
 L:	[email protected]
drivers/iio/light/Kconfig +15 -0
index 182bd18c4bb2..cade6dc0305b 100644
@@ -86,6 +86,21 @@ config APDS9960
 	  To compile this driver as a module, choose M here: the
 	  module will be called apds9960
 
+config AS73211
+	tristate "AMS AS73211 XYZ color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the AMS AS73211
+	 JENCOLOR(R) Digital XYZ Sensor.
+
+	 For triggered measurements, you will need an additional trigger driver
+	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called as73211.
+
 config BH1750
 	tristate "ROHM BH1750 ambient light sensor"
 	depends on I2C
drivers/iio/light/Makefile +1 -0
index d1c8aa30b9a8..ea376deaca54 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010)		+= al3010.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_APDS9960)		+= apds9960.o
+obj-$(CONFIG_AS73211)		+= as73211.o
 obj-$(CONFIG_BH1750)		+= bh1750.o
 obj-$(CONFIG_BH1780)		+= bh1780.o
 obj-$(CONFIG_CM32181)		+= cm32181.o
drivers/iio/light/as73211.c new file +801 -0

801 lines not on this page · raw message

Signature · 8 lines
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
Reviewed-by on v6 2/2
#4 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

Quoted 11 lines · Christian Eggers

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered measurements, an external (software) trigger driver like iio-trig-hrtimer or iio-trig-sysfs is required.

The sensor supports single and continuous measurement modes. The latter is not used by design as this would require tight timing synchronization between hardware and driver without much benefit.

FWIW,

Quoted 883 lines

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf

---
 MAINTAINERS                 |   7 +
 drivers/iio/light/Kconfig   |  15 +
 drivers/iio/light/Makefile  |   1 +
 drivers/iio/light/as73211.c | 801 ++++++++++++++++++++++++++++++++++++
 4 files changed, 824 insertions(+)
 create mode 100644 drivers/iio/light/as73211.c
MAINTAINERS +7 -0
index 068d6e94122b..673570414147 100644
@@ -934,6 +934,13 @@ S: Supported
 F:     arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:     drivers/net/ethernet/amd/xgbe/
 
+AMS AS73211 DRIVER
+M:     Christian Eggers <[email protected]>
+L:     [email protected]
+S:     Maintained
+F:     Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+F:     drivers/iio/light/as73211.c
+
 ANALOG DEVICES INC AD5686 DRIVER
 M:     Michael Hennerich <[email protected]>
 L:     [email protected]
drivers/iio/light/Kconfig +15 -0
index 182bd18c4bb2..cade6dc0305b 100644
@@ -86,6 +86,21 @@ config APDS9960
          To compile this driver as a module, choose M here: the
          module will be called apds9960
 
+config AS73211
+       tristate "AMS AS73211 XYZ color sensor"
+       depends on I2C
+       select IIO_BUFFER
+       select IIO_TRIGGERED_BUFFER
+       help
+        If you say yes here you get support for the AMS AS73211
+        JENCOLOR(R) Digital XYZ Sensor.
+
+        For triggered measurements, you will need an additional trigger driver
+        like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+        This driver can also be built as a module.  If so, the module
+        will be called as73211.
+
 config BH1750
        tristate "ROHM BH1750 ambient light sensor"
        depends on I2C
drivers/iio/light/Makefile +1 -0
index d1c8aa30b9a8..ea376deaca54 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010)          += al3010.o
 obj-$(CONFIG_AL3320A)          += al3320a.o
 obj-$(CONFIG_APDS9300)         += apds9300.o
 obj-$(CONFIG_APDS9960)         += apds9960.o
+obj-$(CONFIG_AS73211)          += as73211.o
 obj-$(CONFIG_BH1750)           += bh1750.o
 obj-$(CONFIG_BH1780)           += bh1780.o
 obj-$(CONFIG_CM32181)          += cm32181.o
drivers/iio/light/as73211.c new file +801 -1
new file mode 100644
index 000000000000..3383aaacbf52
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+ *
+ * Author: Christian Eggers <[email protected]>
+ *
+ * Copyright (c) 2020 ARRI Lighting
+ *
+ * Color light sensor with 16-bit channels for x, y, z and temperature);
+ * 7-bit I2C slave address 0x74 .. 0x77.
+ *
+ * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+
+#define HZ_PER_KHZ 1000
+
+#define AS73211_DRV_NAME "as73211"
+
+/* AS73211 configuration registers */
+#define AS73211_REG_OSR    0x0
+#define AS73211_REG_AGEN   0x2
+#define AS73211_REG_CREG1  0x6
+#define AS73211_REG_CREG2  0x7
+#define AS73211_REG_CREG3  0x8
+
+/* AS73211 output register bank */
+#define AS73211_OUT_OSR_STATUS    0
+#define AS73211_OUT_TEMP          1
+#define AS73211_OUT_MRES1         2
+#define AS73211_OUT_MRES2         3
+#define AS73211_OUT_MRES3         4
+
+#define AS73211_OSR_SS            BIT(7)
+#define AS73211_OSR_PD            BIT(6)
+#define AS73211_OSR_SW_RES        BIT(3)
+#define AS73211_OSR_DOS_MASK      GENMASK(2, 0)
+#define AS73211_OSR_DOS_CONFIG    FIELD_PREP(AS73211_OSR_DOS_MASK, 0x2)
+#define AS73211_OSR_DOS_MEASURE   FIELD_PREP(AS73211_OSR_DOS_MASK, 0x3)
+
+#define AS73211_AGEN_DEVID_MASK   GENMASK(7, 4)
+#define AS73211_AGEN_DEVID(x)     FIELD_PREP(AS73211_AGEN_DEVID_MASK, (x))
+#define AS73211_AGEN_MUT_MASK     GENMASK(3, 0)
+#define AS73211_AGEN_MUT(x)       FIELD_PREP(AS73211_AGEN_MUT_MASK, (x))
+
+#define AS73211_CREG1_GAIN_MASK   GENMASK(7, 4)
+#define AS73211_CREG1_GAIN_1      13
+#define AS73211_CREG1_TIME_MASK   GENMASK(3, 0)
+
+#define AS73211_CREG3_CCLK_MASK   GENMASK(1, 0)
+
+#define AS73211_OSR_STATUS_OUTCONVOF  BIT(15)
+#define AS73211_OSR_STATUS_MRESOF     BIT(14)
+#define AS73211_OSR_STATUS_ADCOF      BIT(13)
+#define AS73211_OSR_STATUS_LDATA      BIT(12)
+#define AS73211_OSR_STATUS_NDATA      BIT(11)
+#define AS73211_OSR_STATUS_NOTREADY   BIT(10)
+
+#define AS73211_SAMPLE_FREQ_BASE      1024000
+
+#define AS73211_SAMPLE_TIME_NUM       15
+#define AS73211_SAMPLE_TIME_MAX_MS    BIT(AS73211_SAMPLE_TIME_NUM - 1)
+
+/* Available sample frequencies are 1.024MHz multiplied by powers of two. */
+static const int as73211_samp_freq_avail[] = {
+       AS73211_SAMPLE_FREQ_BASE * 1,
+       AS73211_SAMPLE_FREQ_BASE * 2,
+       AS73211_SAMPLE_FREQ_BASE * 4,
+       AS73211_SAMPLE_FREQ_BASE * 8,
+};
+
+static const int as73211_hardwaregain_avail[] = {
+       1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
+};
+
+/**
+ * struct as73211_data - Instance data for one AS73211
+ * @client: I2C client.
+ * @osr:    Cached Operational State Register.
+ * @creg1:  Cached Configuration Register 1.
+ * @creg2:  Cached Configuration Register 2.
+ * @creg3:  Cached Configuration Register 3.
+ * @mutex:  Keeps cached registers in sync with the device.
+ * @completion: Completion to wait for interrupt.
+ * @int_time_avail: Available integration times (depend on sampling frequency).
+ */
+struct as73211_data {
+       struct i2c_client *client;
+       u8 osr;
+       u8 creg1;
+       u8 creg2;
+       u8 creg3;
+       struct mutex mutex;
+       struct completion completion;
+       int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2];
+};
+
+#define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \
+       .type = IIO_INTENSITY, \
+       .modified = 1, \
+       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+       .info_mask_shared_by_type = \
+               BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+               BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+               BIT(IIO_CHAN_INFO_INT_TIME), \
+       .info_mask_shared_by_type_available = \
+               BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+               BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+               BIT(IIO_CHAN_INFO_INT_TIME), \
+       .channel2 = IIO_MOD_##_color, \
+       .address = _addr, \
+       .scan_index = _si, \
+       .scan_type = { \
+               .sign = 'u', \
+               .realbits = 16, \
+               .storagebits = 16, \
+               .endianness = IIO_LE, \
+       }, \
+}
+
+#define AS73211_OFFSET_TEMP_INT    (-66)
+#define AS73211_OFFSET_TEMP_MICRO  900000
+#define AS73211_SCALE_TEMP_INT     0
+#define AS73211_SCALE_TEMP_MICRO   50000
+
+#define AS73211_SCALE_X 277071108  /* nW/m^2 */
+#define AS73211_SCALE_Y 298384270  /* nW/m^2 */
+#define AS73211_SCALE_Z 160241927  /* nW/m^2 */
+
+/* Channel order MUST match devices result register order */
+#define AS73211_SCAN_INDEX_TEMP 0
+#define AS73211_SCAN_INDEX_X    1
+#define AS73211_SCAN_INDEX_Y    2
+#define AS73211_SCAN_INDEX_Z    3
+#define AS73211_SCAN_INDEX_TS   4
+
+#define AS73211_SCAN_MASK_COLOR ( \
+       BIT(AS73211_SCAN_INDEX_X) |   \
+       BIT(AS73211_SCAN_INDEX_Y) |   \
+       BIT(AS73211_SCAN_INDEX_Z))
+
+#define AS73211_SCAN_MASK_ALL (    \
+       BIT(AS73211_SCAN_INDEX_TEMP) | \
+       AS73211_SCAN_MASK_COLOR)
+
+static const struct iio_chan_spec as73211_channels[] = {
+       {
+               .type = IIO_TEMP,
+               .info_mask_separate =
+                       BIT(IIO_CHAN_INFO_RAW) |
+                       BIT(IIO_CHAN_INFO_OFFSET) |
+                       BIT(IIO_CHAN_INFO_SCALE),
+               .address = AS73211_OUT_TEMP,
+               .scan_index = AS73211_SCAN_INDEX_TEMP,
+               .scan_type = {
+                       .sign = 'u',
+                       .realbits = 16,
+                       .storagebits = 16,
+                       .endianness = IIO_LE,
+               }
+       },
+       AS73211_COLOR_CHANNEL(X, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1),
+       AS73211_COLOR_CHANNEL(Y, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2),
+       AS73211_COLOR_CHANNEL(Z, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3),
+       IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS),
+};
+
+static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data)
+{
+       /*
+        * Return integration time in units of 1024 clock cycles. Integration time
+        * in CREG1 is in powers of 2 (x 1024 cycles).
+        */
+       return BIT(FIELD_GET(AS73211_CREG1_TIME_MASK, data->creg1));
+}
+
+static unsigned int as73211_integration_time_us(struct as73211_data *data,
+                                                unsigned int integration_time_1024cyc)
+{
+       /*
+        * f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz)
+        * t_cycl is configured in CREG1 in powers of 2 (x 1024 cycles)
+        * t_int_us = 1 / (f_samp) * t_cycl * US_PER_SEC
+        *          = 1 / (2^CREG3_CCLK * 1,024,000) * 2^CREG1_CYCLES * 1,024 * US_PER_SEC
+        *          = 2^(-CREG3_CCLK) * 2^CREG1_CYCLES * 1,000
+        * In order to get rid of negative exponents, we extend the "fraction"
+        * by 2^3 (CREG3_CCLK,max = 3)
+        * t_int_us = 2^(3-CREG3_CCLK) * 2^CREG1_CYCLES * 125
+        */
+       return BIT(3 - FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+               integration_time_1024cyc * 125;
+}
+
+static void as73211_integration_time_calc_avail(struct as73211_data *data)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(data->int_time_avail); i++) {
+               unsigned int time_us = as73211_integration_time_us(data, BIT(i));
+
+               data->int_time_avail[i * 2 + 0] = time_us / USEC_PER_SEC;
+               data->int_time_avail[i * 2 + 1] = time_us % USEC_PER_SEC;
+       }
+}
+
+static unsigned int as73211_gain(struct as73211_data *data)
+{
+       /* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+       return BIT(AS73211_CREG1_GAIN_1 - FIELD_GET(AS73211_CREG1_GAIN_MASK, data->creg1));
+}
+
+/* must be called with as73211_data::mutex held. */
+static int as73211_req_data(struct as73211_data *data)
+{
+       unsigned int time_us = as73211_integration_time_us(data,
+                                                           as73211_integration_time_1024cyc(data));
+       struct device *dev = &data->client->dev;
+       union i2c_smbus_data smbus_data;
+       u16 osr_status;
+       int ret;
+
+       if (data->client->irq)
+               reinit_completion(&data->completion);
+
+       /*
+        * During measurement, there should be no traffic on the i2c bus as the
+        * electrical noise would disturb the measurement process.
+        */
+       i2c_lock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+       data->osr &= ~AS73211_OSR_DOS_MASK;
+       data->osr |= AS73211_OSR_DOS_MEASURE | AS73211_OSR_SS;
+
+       smbus_data.byte = data->osr;
+       ret = __i2c_smbus_xfer(data->client->adapter, data->client->addr,
+                       data->client->flags, I2C_SMBUS_WRITE,
+                       AS73211_REG_OSR, I2C_SMBUS_BYTE_DATA, &smbus_data);
+       if (ret < 0) {
+               i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+               return ret;
+       }
+
+       /*
+        * Reset AS73211_OSR_SS (is self clearing) in order to avoid unintentional
+        * triggering of further measurements later.
+        */
+       data->osr &= ~AS73211_OSR_SS;
+
+       /*
+        * Add some extra margin for the timeout. sensor timing is not as precise
+        * as our one ...
+        */
+       time_us += time_us / 8;
+       if (data->client->irq) {
+               ret = wait_for_completion_timeout(&data->completion, usecs_to_jiffies(time_us));
+               if (!ret) {
+                       dev_err(dev, "timeout waiting for READY IRQ\n");
+                       i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+                       return -ETIMEDOUT;
+               }
+       } else {
+               /* Wait integration time */
+               usleep_range(time_us, 2 * time_us);
+       }
+
+       i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+       ret = i2c_smbus_read_word_data(data->client, AS73211_OUT_OSR_STATUS);
+       if (ret < 0)
+               return ret;
+
+       osr_status = ret;
+       if (osr_status != (AS73211_OSR_DOS_MEASURE | AS73211_OSR_STATUS_NDATA)) {
+               if (osr_status & AS73211_OSR_SS) {
+                       dev_err(dev, "%s() Measurement has not stopped\n", __func__);
+                       return -ETIME;
+               }
+               if (osr_status & AS73211_OSR_STATUS_NOTREADY) {
+                       dev_err(dev, "%s() Data is not ready\n", __func__);
+                       return -ENODATA;
+               }
+               if (!(osr_status & AS73211_OSR_STATUS_NDATA)) {
+                       dev_err(dev, "%s() No new data available\n", __func__);
+                       return -ENODATA;
+               }
+               if (osr_status & AS73211_OSR_STATUS_LDATA) {
+                       dev_err(dev, "%s() Result buffer overrun\n", __func__);
+                       return -ENOBUFS;
+               }
+               if (osr_status & AS73211_OSR_STATUS_ADCOF) {
+                       dev_err(dev, "%s() ADC overflow\n", __func__);
+                       return -EOVERFLOW;
+               }
+               if (osr_status & AS73211_OSR_STATUS_MRESOF) {
+                       dev_err(dev, "%s() Measurement result overflow\n", __func__);
+                       return -EOVERFLOW;
+               }
+               if (osr_status & AS73211_OSR_STATUS_OUTCONVOF) {
+                       dev_err(dev, "%s() Timer overflow\n", __func__);
+                       return -EOVERFLOW;
+               }
+               dev_err(dev, "%s() Unexpected status value\n", __func__);
+               return -EIO;
+       }
+
+       return 0;
+}
+
+static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+                            int *val, int *val2, long mask)
+{
+       struct as73211_data *data = iio_priv(indio_dev);
+
+       switch (mask) {
+       case IIO_CHAN_INFO_RAW: {
+               int ret;
+
+               ret = iio_device_claim_direct_mode(indio_dev);
+               if (ret < 0)
+                       return ret;
+
+               ret = as73211_req_data(data);
+               if (ret < 0) {
+                       iio_device_release_direct_mode(indio_dev);
+                       return ret;
+               }
+
+               ret = i2c_smbus_read_word_data(data->client, chan->address);
+               iio_device_release_direct_mode(indio_dev);
+               if (ret < 0)
+                       return ret;
+
+               *val = ret;
+               return IIO_VAL_INT;
+       }
+       case IIO_CHAN_INFO_OFFSET:
+               *val = AS73211_OFFSET_TEMP_INT;
+               *val2 = AS73211_OFFSET_TEMP_MICRO;
+               return IIO_VAL_INT_PLUS_MICRO;
+
+       case IIO_CHAN_INFO_SCALE:
+               switch (chan->type) {
+               case IIO_TEMP:
+                       *val = AS73211_SCALE_TEMP_INT;
+                       *val2 = AS73211_SCALE_TEMP_MICRO;
+                       return IIO_VAL_INT_PLUS_MICRO;
+
+               case IIO_INTENSITY: {
+                       unsigned int scale;
+
+                       switch (chan->channel2) {
+                       case IIO_MOD_X:
+                               scale = AS73211_SCALE_X;
+                               break;
+                       case IIO_MOD_Y:
+                               scale = AS73211_SCALE_Y;
+                               break;
+                       case IIO_MOD_Z:
+                               scale = AS73211_SCALE_Z;
+                               break;
+                       default:
+                               return -EINVAL;
+                       }
+                       scale /= as73211_gain(data);
+                       scale /= as73211_integration_time_1024cyc(data);
+                       *val = scale;
+                       return IIO_VAL_INT;
+
+               default:
+                       return -EINVAL;
+               }}
+
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+               *val = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+                       AS73211_SAMPLE_FREQ_BASE;
+               return IIO_VAL_INT;
+
+       case IIO_CHAN_INFO_HARDWAREGAIN:
+               *val = as73211_gain(data);
+               return IIO_VAL_INT;
+
+       case IIO_CHAN_INFO_INT_TIME: {
+               unsigned int time_us;
+
+               mutex_lock(&data->mutex);
+               time_us = as73211_integration_time_us(data, as73211_integration_time_1024cyc(data));
+               mutex_unlock(&data->mutex);
+               *val = time_us / USEC_PER_SEC;
+               *val2 = time_us % USEC_PER_SEC;
+               return IIO_VAL_INT_PLUS_MICRO;
+
+       default:
+               return -EINVAL;
+       }}
+}
+
+static int as73211_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+                              const int **vals, int *type, int *length, long mask)
+{
+       struct as73211_data *data = iio_priv(indio_dev);
+
+       switch (mask) {
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               *length = ARRAY_SIZE(as73211_samp_freq_avail);
+               *vals = as73211_samp_freq_avail;
+               *type = IIO_VAL_INT;
+               return IIO_AVAIL_LIST;
+
+       case IIO_CHAN_INFO_HARDWAREGAIN:
+               *length = ARRAY_SIZE(as73211_hardwaregain_avail);
+               *vals = as73211_hardwaregain_avail;
+               *type = IIO_VAL_INT;
+               return IIO_AVAIL_LIST;
+
+       case IIO_CHAN_INFO_INT_TIME:
+               *length = ARRAY_SIZE(data->int_time_avail);
+               *vals = data->int_time_avail;
+               *type = IIO_VAL_INT_PLUS_MICRO;
+               return IIO_AVAIL_LIST;
+
+       default:
+               return -EINVAL;
+       }
+}
+
+static int _as73211_write_raw(struct iio_dev *indio_dev,
+                              struct iio_chan_spec const *chan __always_unused,
+                              int val, int val2, long mask)
+{
+       struct as73211_data *data = iio_priv(indio_dev);
+       int ret;
+
+       switch (mask) {
+       case IIO_CHAN_INFO_SAMP_FREQ: {
+               int reg_bits, freq_kHz = val / HZ_PER_KHZ;  /* 1024, 2048, ... */
+
+               /* val must be 1024 * 2^x */
+               if (val < 0 || (freq_kHz * HZ_PER_KHZ) != val ||
+                               !is_power_of_2(freq_kHz) || val2)
+                       return -EINVAL;
+
+               /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz (=2^10)) */
+               reg_bits = ilog2(freq_kHz) - 10;
+               if (!FIELD_FIT(AS73211_CREG3_CCLK_MASK, reg_bits))
+                       return -EINVAL;
+
+               data->creg3 &= ~AS73211_CREG3_CCLK_MASK;
+               data->creg3 |= FIELD_PREP(AS73211_CREG3_CCLK_MASK, reg_bits);
+               as73211_integration_time_calc_avail(data);
+
+               ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG3, data->creg3);
+               if (ret < 0)
+                       return ret;
+
+               return 0;
+       }
+       case IIO_CHAN_INFO_HARDWAREGAIN: {
+               unsigned int reg_bits;
+
+               if (val < 0 || !is_power_of_2(val) || val2)
+                       return -EINVAL;
+
+               /* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+               reg_bits = AS73211_CREG1_GAIN_1 - ilog2(val);
+               if (!FIELD_FIT(AS73211_CREG1_GAIN_MASK, reg_bits))
+                       return -EINVAL;
+
+               data->creg1 &= ~AS73211_CREG1_GAIN_MASK;
+               data->creg1 |= FIELD_PREP(AS73211_CREG1_GAIN_MASK, reg_bits);
+
+               ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+               if (ret < 0)
+                       return ret;
+
+               return 0;
+       }
+       case IIO_CHAN_INFO_INT_TIME: {
+               int val_us = val * USEC_PER_SEC + val2;
+               int time_ms;
+               int reg_bits;
+
+               /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+               int f_samp_1_024mhz = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3));
+
+               /*
+                * time_ms = time_us * US_PER_MS * f_samp_1_024mhz / MHZ_PER_HZ
+                *         = time_us * f_samp_1_024mhz / 1000
+                */
+               time_ms = (val_us * f_samp_1_024mhz) / 1000;  /* 1 ms, 2 ms, ... (power of two) */
+               if (time_ms < 0 || !is_power_of_2(time_ms) || time_ms > AS73211_SAMPLE_TIME_MAX_MS)
+                       return -EINVAL;
+
+               reg_bits = ilog2(time_ms);
+               if (!FIELD_FIT(AS73211_CREG1_TIME_MASK, reg_bits))
+                       return -EINVAL;  /* not possible due to previous tests */
+
+               data->creg1 &= ~AS73211_CREG1_TIME_MASK;
+               data->creg1 |= FIELD_PREP(AS73211_CREG1_TIME_MASK, reg_bits);
+
+               ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+               if (ret < 0)
+                       return ret;
+
+               return 0;
+
+       default:
+               return -EINVAL;
+       }}
+}
+
+static int as73211_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+                             int val, int val2, long mask)
+{
+       struct as73211_data *data = iio_priv(indio_dev);
+       int ret;
+
+       mutex_lock(&data->mutex);
+
+       ret = iio_device_claim_direct_mode(indio_dev);
+       if (ret < 0)
+               goto error_unlock;
+
+       /* Need to switch to config mode ... */
+       if ((data->osr & AS73211_OSR_DOS_MASK) != AS73211_OSR_DOS_CONFIG) {
+               data->osr &= ~AS73211_OSR_DOS_MASK;
+               data->osr |= AS73211_OSR_DOS_CONFIG;
+
+               ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+               if (ret < 0)
+                       goto error_release;
+       }
+
+       ret = _as73211_write_raw(indio_dev, chan, val, val2, mask);
+
+error_release:
+       iio_device_release_direct_mode(indio_dev);
+error_unlock:
+       mutex_unlock(&data->mutex);
+       return ret;
+}
+
+static irqreturn_t as73211_ready_handler(int irq __always_unused, void *priv)
+{
+       struct as73211_data *data = iio_priv(priv);
+
+       complete(&data->completion);
+
+       return IRQ_HANDLED;
+}
+
+static irqreturn_t as73211_trigger_handler(int irq __always_unused, void *p)
+{
+       struct iio_poll_func *pf = p;
+       struct iio_dev *indio_dev = pf->indio_dev;
+       struct as73211_data *data = iio_priv(indio_dev);
+       struct {
+               __le16 chan[4];
+               s64 ts __aligned(8);
+       } scan;
+       int data_result, ret;
+
+       mutex_lock(&data->mutex);
+
+       data_result = as73211_req_data(data);
+       if (data_result < 0 && data_result != -EOVERFLOW)
+               goto done;  /* don't push any data for errors other than EOVERFLOW */
+
+       if (*indio_dev->active_scan_mask == AS73211_SCAN_MASK_ALL) {
+               /* Optimization for reading all (color + temperature) channels */
+               u8 addr = as73211_channels[0].address;
+               struct i2c_msg msgs[] = {
+                       {
+                               .addr = data->client->addr,
+                               .flags = 0,
+                               .len = 1,
+                               .buf = &addr,
+                       },
+                       {
+                               .addr = data->client->addr,
+                               .flags = I2C_M_RD,
+                               .len = sizeof(scan.chan),
+                               .buf = (u8 *)&scan.chan,
+                       },
+               };
+
+               ret = i2c_transfer(data->client->adapter, msgs, ARRAY_SIZE(msgs));
+               if (ret < 0)
+                       goto done;
+       } else {
+               /* Optimization for reading only color channels */
+
+               /* AS73211 starts reading at address 2 */
+               ret = i2c_master_recv(data->client,
+                               (char *)&scan.chan[1], 3 * sizeof(scan.chan[1]));
+               if (ret < 0)
+                       goto done;
+       }
+
+       if (data_result) {
+               /*
+                * Saturate all channels (in case of overflows). Temperature channel
+                * is not affected by overflows.
+                */
+               scan.chan[1] = cpu_to_le16(U16_MAX);
+               scan.chan[2] = cpu_to_le16(U16_MAX);
+               scan.chan[3] = cpu_to_le16(U16_MAX);
+       }
+
+       iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+
+done:
+       mutex_unlock(&data->mutex);
+       iio_trigger_notify_done(indio_dev->trig);
+
+       return IRQ_HANDLED;
+}
+
+static const struct iio_info as73211_info = {
+       .read_raw = as73211_read_raw,
+       .read_avail = as73211_read_avail,
+       .write_raw = as73211_write_raw,
+};
+
+static int as73211_power(struct iio_dev *indio_dev, bool state)
+{
+       struct as73211_data *data = iio_priv(indio_dev);
+       int ret;
+
+       mutex_lock(&data->mutex);
+
+       if (state)
+               data->osr &= ~AS73211_OSR_PD;
+       else
+               data->osr |= AS73211_OSR_PD;
+
+       ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+
+       mutex_unlock(&data->mutex);
+
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
+static void as73211_power_disable(void *data)
+{
+       struct iio_dev *indio_dev = data;
+
+       as73211_power(indio_dev, false);
+}
+
+static int as73211_probe(struct i2c_client *client)
+{
+       struct device *dev = &client->dev;
+       struct as73211_data *data;
+       struct iio_dev *indio_dev;
+       int ret;
+
+       indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+       if (!indio_dev)
+               return -ENOMEM;
+
+       data = iio_priv(indio_dev);
+       i2c_set_clientdata(client, indio_dev);
+       data->client = client;
+
+       mutex_init(&data->mutex);
+       init_completion(&data->completion);
+
+       indio_dev->info = &as73211_info;
+       indio_dev->name = AS73211_DRV_NAME;
+       indio_dev->channels = as73211_channels;
+       indio_dev->num_channels = ARRAY_SIZE(as73211_channels);
+       indio_dev->modes = INDIO_DIRECT_MODE;
+
+       ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+       if (ret < 0)
+               return ret;
+       data->osr = ret;
+
+       /* reset device */
+       data->osr |= AS73211_OSR_SW_RES;
+       ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+       if (ret < 0)
+               return ret;
+
+       ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+       if (ret < 0)
+               return ret;
+       data->osr = ret;
+
+       /*
+        * Reading AGEN is only possible after reset (AGEN is not available if
+        * device is in measurement mode).
+        */
+       ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_AGEN);
+       if (ret < 0)
+               return ret;
+
+       /* At the time of writing this driver, only DEVID 2 and MUT 1 are known. */
+       if ((ret & AS73211_AGEN_DEVID_MASK) != AS73211_AGEN_DEVID(2) ||
+           (ret & AS73211_AGEN_MUT_MASK) != AS73211_AGEN_MUT(1))
+               return -ENODEV;
+
+       ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG1);
+       if (ret < 0)
+               return ret;
+       data->creg1 = ret;
+
+       ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG2);
+       if (ret < 0)
+               return ret;
+       data->creg2 = ret;
+
+       ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG3);
+       if (ret < 0)
+               return ret;
+       data->creg3 = ret;
+       as73211_integration_time_calc_avail(data);
+
+       ret = as73211_power(indio_dev, true);
+       if (ret < 0)
+               return ret;
+
+       ret = devm_add_action_or_reset(dev, as73211_power_disable, indio_dev);
+       if (ret)
+               return ret;
+
+       ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, as73211_trigger_handler, NULL);
+       if (ret)
+               return ret;
+
+       if (client->irq) {
+               ret = devm_request_threaded_irq(&client->dev, client->irq,
+                               NULL,
+                               as73211_ready_handler,
+                               IRQF_ONESHOT,
+                               client->name, indio_dev);
+               if (ret)
+                       return ret;
+       }
+
+       return devm_iio_device_register(dev, indio_dev);
+}
+
+static int __maybe_unused as73211_suspend(struct device *dev)
+{
+       struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+       return as73211_power(indio_dev, false);
+}
+
+static int __maybe_unused as73211_resume(struct device *dev)
+{
+       struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+       return as73211_power(indio_dev, true);
+}
+
+static SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume);
+
+static const struct of_device_id as73211_of_match[] = {
+       { .compatible = "ams,as73211" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, as73211_of_match);
+
+static const struct i2c_device_id as73211_id[] = {
+       { "as73211", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, as73211_id);
+
+static struct i2c_driver as73211_driver = {
+       .driver = {
+               .name           = AS73211_DRV_NAME,
+               .of_match_table = as73211_of_match,
+               .pm             = &as73211_pm_ops,
+       },
+       .probe_new  = as73211_probe,
+       .id_table   = as73211_id,
+};
+module_i2c_driver(as73211_driver);
+
+MODULE_AUTHOR("Christian Eggers <[email protected]>");
+MODULE_DESCRIPTION("AS73211 XYZ True Color Sensor driver");
+MODULE_LICENSE("GPL");
--

Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#5 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

In reply to Christian Eggers
Quoted 6 lines · On Wed, 5 Aug 2020 07:57:44 +0200 Christian Eggers <[email protected]> wrote:

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered measurements, an external (software) trigger driver like iio-trig-hrtimer or iio-trig-sysfs is required.

Quoted 6 lines

The sensor supports single and continuous measurement modes. The latter is not used by design as this would require tight timing synchronization between hardware and driver without much benefit.

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Quoted 871 lines
---
 MAINTAINERS                 |   7 +
 drivers/iio/light/Kconfig   |  15 +
 drivers/iio/light/Makefile  |   1 +
 drivers/iio/light/as73211.c | 801 ++++++++++++++++++++++++++++++++++++
 4 files changed, 824 insertions(+)
 create mode 100644 drivers/iio/light/as73211.c
MAINTAINERS +7 -0
index 068d6e94122b..673570414147 100644
@@ -934,6 +934,13 @@ S:	Supported
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:	drivers/net/ethernet/amd/xgbe/
 
+AMS AS73211 DRIVER
+M:	Christian Eggers <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+F:	drivers/iio/light/as73211.c
+
 ANALOG DEVICES INC AD5686 DRIVER
 M:	Michael Hennerich <[email protected]>
 L:	[email protected]
drivers/iio/light/Kconfig +15 -0
index 182bd18c4bb2..cade6dc0305b 100644
@@ -86,6 +86,21 @@ config APDS9960
 	  To compile this driver as a module, choose M here: the
 	  module will be called apds9960
 
+config AS73211
+	tristate "AMS AS73211 XYZ color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the AMS AS73211
+	 JENCOLOR(R) Digital XYZ Sensor.
+
+	 For triggered measurements, you will need an additional trigger driver
+	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called as73211.
+
 config BH1750
 	tristate "ROHM BH1750 ambient light sensor"
 	depends on I2C
drivers/iio/light/Makefile +1 -0
index d1c8aa30b9a8..ea376deaca54 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010)		+= al3010.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_APDS9960)		+= apds9960.o
+obj-$(CONFIG_AS73211)		+= as73211.o
 obj-$(CONFIG_BH1750)		+= bh1750.o
 obj-$(CONFIG_BH1780)		+= bh1780.o
 obj-$(CONFIG_CM32181)		+= cm32181.o
drivers/iio/light/as73211.c new file +801 -0
new file mode 100644
index 000000000000..3383aaacbf52
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+ *
+ * Author: Christian Eggers <[email protected]>
+ *
+ * Copyright (c) 2020 ARRI Lighting
+ *
+ * Color light sensor with 16-bit channels for x, y, z and temperature);
+ * 7-bit I2C slave address 0x74 .. 0x77.
+ *
+ * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+
+#define HZ_PER_KHZ 1000
+
+#define AS73211_DRV_NAME "as73211"
+
+/* AS73211 configuration registers */
+#define AS73211_REG_OSR    0x0
+#define AS73211_REG_AGEN   0x2
+#define AS73211_REG_CREG1  0x6
+#define AS73211_REG_CREG2  0x7
+#define AS73211_REG_CREG3  0x8
+
+/* AS73211 output register bank */
+#define AS73211_OUT_OSR_STATUS    0
+#define AS73211_OUT_TEMP          1
+#define AS73211_OUT_MRES1         2
+#define AS73211_OUT_MRES2         3
+#define AS73211_OUT_MRES3         4
+
+#define AS73211_OSR_SS            BIT(7)
+#define AS73211_OSR_PD            BIT(6)
+#define AS73211_OSR_SW_RES        BIT(3)
+#define AS73211_OSR_DOS_MASK      GENMASK(2, 0)
+#define AS73211_OSR_DOS_CONFIG    FIELD_PREP(AS73211_OSR_DOS_MASK, 0x2)
+#define AS73211_OSR_DOS_MEASURE   FIELD_PREP(AS73211_OSR_DOS_MASK, 0x3)
+
+#define AS73211_AGEN_DEVID_MASK   GENMASK(7, 4)
+#define AS73211_AGEN_DEVID(x)     FIELD_PREP(AS73211_AGEN_DEVID_MASK, (x))
+#define AS73211_AGEN_MUT_MASK     GENMASK(3, 0)
+#define AS73211_AGEN_MUT(x)       FIELD_PREP(AS73211_AGEN_MUT_MASK, (x))
+
+#define AS73211_CREG1_GAIN_MASK   GENMASK(7, 4)
+#define AS73211_CREG1_GAIN_1      13
+#define AS73211_CREG1_TIME_MASK   GENMASK(3, 0)
+
+#define AS73211_CREG3_CCLK_MASK   GENMASK(1, 0)
+
+#define AS73211_OSR_STATUS_OUTCONVOF  BIT(15)
+#define AS73211_OSR_STATUS_MRESOF     BIT(14)
+#define AS73211_OSR_STATUS_ADCOF      BIT(13)
+#define AS73211_OSR_STATUS_LDATA      BIT(12)
+#define AS73211_OSR_STATUS_NDATA      BIT(11)
+#define AS73211_OSR_STATUS_NOTREADY   BIT(10)
+
+#define AS73211_SAMPLE_FREQ_BASE      1024000
+
+#define AS73211_SAMPLE_TIME_NUM       15
+#define AS73211_SAMPLE_TIME_MAX_MS    BIT(AS73211_SAMPLE_TIME_NUM - 1)
+
+/* Available sample frequencies are 1.024MHz multiplied by powers of two. */
+static const int as73211_samp_freq_avail[] = {
+	AS73211_SAMPLE_FREQ_BASE * 1,
+	AS73211_SAMPLE_FREQ_BASE * 2,
+	AS73211_SAMPLE_FREQ_BASE * 4,
+	AS73211_SAMPLE_FREQ_BASE * 8,
+};
+
+static const int as73211_hardwaregain_avail[] = {
+	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
+};
+
+/**
+ * struct as73211_data - Instance data for one AS73211
+ * @client: I2C client.
+ * @osr:    Cached Operational State Register.
+ * @creg1:  Cached Configuration Register 1.
+ * @creg2:  Cached Configuration Register 2.
+ * @creg3:  Cached Configuration Register 3.
+ * @mutex:  Keeps cached registers in sync with the device.
+ * @completion: Completion to wait for interrupt.
+ * @int_time_avail: Available integration times (depend on sampling frequency).
+ */
+struct as73211_data {
+	struct i2c_client *client;
+	u8 osr;
+	u8 creg1;
+	u8 creg2;
+	u8 creg3;
+	struct mutex mutex;
+	struct completion completion;
+	int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2];
+};
+
+#define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_type = \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.info_mask_shared_by_type_available = \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.channel2 = IIO_MOD_##_color, \
+	.address = _addr, \
+	.scan_index = _si, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_LE, \
+	}, \
+}
+
+#define AS73211_OFFSET_TEMP_INT    (-66)
+#define AS73211_OFFSET_TEMP_MICRO  900000
+#define AS73211_SCALE_TEMP_INT     0
+#define AS73211_SCALE_TEMP_MICRO   50000
+
+#define AS73211_SCALE_X 277071108  /* nW/m^2 */
+#define AS73211_SCALE_Y 298384270  /* nW/m^2 */
+#define AS73211_SCALE_Z 160241927  /* nW/m^2 */
+
+/* Channel order MUST match devices result register order */
+#define AS73211_SCAN_INDEX_TEMP 0
+#define AS73211_SCAN_INDEX_X    1
+#define AS73211_SCAN_INDEX_Y    2
+#define AS73211_SCAN_INDEX_Z    3
+#define AS73211_SCAN_INDEX_TS   4
+
+#define AS73211_SCAN_MASK_COLOR ( \
+	BIT(AS73211_SCAN_INDEX_X) |   \
+	BIT(AS73211_SCAN_INDEX_Y) |   \
+	BIT(AS73211_SCAN_INDEX_Z))
+
+#define AS73211_SCAN_MASK_ALL (    \
+	BIT(AS73211_SCAN_INDEX_TEMP) | \
+	AS73211_SCAN_MASK_COLOR)
+
+static const struct iio_chan_spec as73211_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_OFFSET) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.address = AS73211_OUT_TEMP,
+		.scan_index = AS73211_SCAN_INDEX_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		}
+	},
+	AS73211_COLOR_CHANNEL(X, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1),
+	AS73211_COLOR_CHANNEL(Y, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2),
+	AS73211_COLOR_CHANNEL(Z, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3),
+	IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS),
+};
+
+static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data)
+{
+	/*
+	 * Return integration time in units of 1024 clock cycles. Integration time
+	 * in CREG1 is in powers of 2 (x 1024 cycles).
+	 */
+	return BIT(FIELD_GET(AS73211_CREG1_TIME_MASK, data->creg1));
+}
+
+static unsigned int as73211_integration_time_us(struct as73211_data *data,
+						 unsigned int integration_time_1024cyc)
+{
+	/*
+	 * f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz)
+	 * t_cycl is configured in CREG1 in powers of 2 (x 1024 cycles)
+	 * t_int_us = 1 / (f_samp) * t_cycl * US_PER_SEC
+	 *          = 1 / (2^CREG3_CCLK * 1,024,000) * 2^CREG1_CYCLES * 1,024 * US_PER_SEC
+	 *          = 2^(-CREG3_CCLK) * 2^CREG1_CYCLES * 1,000
+	 * In order to get rid of negative exponents, we extend the "fraction"
+	 * by 2^3 (CREG3_CCLK,max = 3)
+	 * t_int_us = 2^(3-CREG3_CCLK) * 2^CREG1_CYCLES * 125
+	 */
+	return BIT(3 - FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+		integration_time_1024cyc * 125;
+}
+
+static void as73211_integration_time_calc_avail(struct as73211_data *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->int_time_avail); i++) {
+		unsigned int time_us = as73211_integration_time_us(data, BIT(i));
+
+		data->int_time_avail[i * 2 + 0] = time_us / USEC_PER_SEC;
+		data->int_time_avail[i * 2 + 1] = time_us % USEC_PER_SEC;
+	}
+}
+
+static unsigned int as73211_gain(struct as73211_data *data)
+{
+	/* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+	return BIT(AS73211_CREG1_GAIN_1 - FIELD_GET(AS73211_CREG1_GAIN_MASK, data->creg1));
+}
+
+/* must be called with as73211_data::mutex held. */
+static int as73211_req_data(struct as73211_data *data)
+{
+	unsigned int time_us = as73211_integration_time_us(data,
+							    as73211_integration_time_1024cyc(data));
+	struct device *dev = &data->client->dev;
+	union i2c_smbus_data smbus_data;
+	u16 osr_status;
+	int ret;
+
+	if (data->client->irq)
+		reinit_completion(&data->completion);
+
+	/*
+	 * During measurement, there should be no traffic on the i2c bus as the
+	 * electrical noise would disturb the measurement process.
+	 */
+	i2c_lock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+	data->osr &= ~AS73211_OSR_DOS_MASK;
+	data->osr |= AS73211_OSR_DOS_MEASURE | AS73211_OSR_SS;
+
+	smbus_data.byte = data->osr;
+	ret = __i2c_smbus_xfer(data->client->adapter, data->client->addr,
+			data->client->flags, I2C_SMBUS_WRITE,
+			AS73211_REG_OSR, I2C_SMBUS_BYTE_DATA, &smbus_data);
+	if (ret < 0) {
+		i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+		return ret;
+	}
+
+	/*
+	 * Reset AS73211_OSR_SS (is self clearing) in order to avoid unintentional
+	 * triggering of further measurements later.
+	 */
+	data->osr &= ~AS73211_OSR_SS;
+
+	/*
+	 * Add some extra margin for the timeout. sensor timing is not as precise
+	 * as our one ...
+	 */
+	time_us += time_us / 8;
+	if (data->client->irq) {
+		ret = wait_for_completion_timeout(&data->completion, usecs_to_jiffies(time_us));
+		if (!ret) {
+			dev_err(dev, "timeout waiting for READY IRQ\n");
+			i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+			return -ETIMEDOUT;
+		}
+	} else {
+		/* Wait integration time */
+		usleep_range(time_us, 2 * time_us);
+	}
+
+	i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+	ret = i2c_smbus_read_word_data(data->client, AS73211_OUT_OSR_STATUS);
+	if (ret < 0)
+		return ret;
+
+	osr_status = ret;
+	if (osr_status != (AS73211_OSR_DOS_MEASURE | AS73211_OSR_STATUS_NDATA)) {
+		if (osr_status & AS73211_OSR_SS) {
+			dev_err(dev, "%s() Measurement has not stopped\n", __func__);
+			return -ETIME;
+		}
+		if (osr_status & AS73211_OSR_STATUS_NOTREADY) {
+			dev_err(dev, "%s() Data is not ready\n", __func__);
+			return -ENODATA;
+		}
+		if (!(osr_status & AS73211_OSR_STATUS_NDATA)) {
+			dev_err(dev, "%s() No new data available\n", __func__);
+			return -ENODATA;
+		}
+		if (osr_status & AS73211_OSR_STATUS_LDATA) {
+			dev_err(dev, "%s() Result buffer overrun\n", __func__);
+			return -ENOBUFS;
+		}
+		if (osr_status & AS73211_OSR_STATUS_ADCOF) {
+			dev_err(dev, "%s() ADC overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		if (osr_status & AS73211_OSR_STATUS_MRESOF) {
+			dev_err(dev, "%s() Measurement result overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		if (osr_status & AS73211_OSR_STATUS_OUTCONVOF) {
+			dev_err(dev, "%s() Timer overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		dev_err(dev, "%s() Unexpected status value\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		int ret;
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		ret = as73211_req_data(data);
+		if (ret < 0) {
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		}
+
+		ret = i2c_smbus_read_word_data(data->client, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		*val = ret;
+		return IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = AS73211_OFFSET_TEMP_INT;
+		*val2 = AS73211_OFFSET_TEMP_MICRO;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = AS73211_SCALE_TEMP_INT;
+			*val2 = AS73211_SCALE_TEMP_MICRO;
+			return IIO_VAL_INT_PLUS_MICRO;
+
+		case IIO_INTENSITY: {
+			unsigned int scale;
+
+			switch (chan->channel2) {
+			case IIO_MOD_X:
+				scale = AS73211_SCALE_X;
+				break;
+			case IIO_MOD_Y:
+				scale = AS73211_SCALE_Y;
+				break;
+			case IIO_MOD_Z:
+				scale = AS73211_SCALE_Z;
+				break;
+			default:
+				return -EINVAL;
+			}
+			scale /= as73211_gain(data);
+			scale /= as73211_integration_time_1024cyc(data);
+			*val = scale;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}}
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+		*val = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+			AS73211_SAMPLE_FREQ_BASE;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*val = as73211_gain(data);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_INT_TIME: {
+		unsigned int time_us;
+
+		mutex_lock(&data->mutex);
+		time_us = as73211_integration_time_us(data, as73211_integration_time_1024cyc(data));
+		mutex_unlock(&data->mutex);
+		*val = time_us / USEC_PER_SEC;
+		*val2 = time_us % USEC_PER_SEC;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}}
+}
+
+static int as73211_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(as73211_samp_freq_avail);
+		*vals = as73211_samp_freq_avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*length = ARRAY_SIZE(as73211_hardwaregain_avail);
+		*vals = as73211_hardwaregain_avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(data->int_time_avail);
+		*vals = data->int_time_avail;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int _as73211_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan __always_unused,
+			       int val, int val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		int reg_bits, freq_kHz = val / HZ_PER_KHZ;  /* 1024, 2048, ... */
+
+		/* val must be 1024 * 2^x */
+		if (val < 0 || (freq_kHz * HZ_PER_KHZ) != val ||
+				!is_power_of_2(freq_kHz) || val2)
+			return -EINVAL;
+
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz (=2^10)) */
+		reg_bits = ilog2(freq_kHz) - 10;
+		if (!FIELD_FIT(AS73211_CREG3_CCLK_MASK, reg_bits))
+			return -EINVAL;
+
+		data->creg3 &= ~AS73211_CREG3_CCLK_MASK;
+		data->creg3 |= FIELD_PREP(AS73211_CREG3_CCLK_MASK, reg_bits);
+		as73211_integration_time_calc_avail(data);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG3, data->creg3);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	}
+	case IIO_CHAN_INFO_HARDWAREGAIN: {
+		unsigned int reg_bits;
+
+		if (val < 0 || !is_power_of_2(val) || val2)
+			return -EINVAL;
+
+		/* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+		reg_bits = AS73211_CREG1_GAIN_1 - ilog2(val);
+		if (!FIELD_FIT(AS73211_CREG1_GAIN_MASK, reg_bits))
+			return -EINVAL;
+
+		data->creg1 &= ~AS73211_CREG1_GAIN_MASK;
+		data->creg1 |= FIELD_PREP(AS73211_CREG1_GAIN_MASK, reg_bits);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	}
+	case IIO_CHAN_INFO_INT_TIME: {
+		int val_us = val * USEC_PER_SEC + val2;
+		int time_ms;
+		int reg_bits;
+
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+		int f_samp_1_024mhz = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3));
+
+		/*
+		 * time_ms = time_us * US_PER_MS * f_samp_1_024mhz / MHZ_PER_HZ
+		 *         = time_us * f_samp_1_024mhz / 1000
+		 */
+		time_ms = (val_us * f_samp_1_024mhz) / 1000;  /* 1 ms, 2 ms, ... (power of two) */
+		if (time_ms < 0 || !is_power_of_2(time_ms) || time_ms > AS73211_SAMPLE_TIME_MAX_MS)
+			return -EINVAL;
+
+		reg_bits = ilog2(time_ms);
+		if (!FIELD_FIT(AS73211_CREG1_TIME_MASK, reg_bits))
+			return -EINVAL;  /* not possible due to previous tests */
+
+		data->creg1 &= ~AS73211_CREG1_TIME_MASK;
+		data->creg1 |= FIELD_PREP(AS73211_CREG1_TIME_MASK, reg_bits);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+
+	default:
+		return -EINVAL;
+	}}
+}
+
+static int as73211_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret < 0)
+		goto error_unlock;
+
+	/* Need to switch to config mode ... */
+	if ((data->osr & AS73211_OSR_DOS_MASK) != AS73211_OSR_DOS_CONFIG) {
+		data->osr &= ~AS73211_OSR_DOS_MASK;
+		data->osr |= AS73211_OSR_DOS_CONFIG;
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+		if (ret < 0)
+			goto error_release;
+	}
+
+	ret = _as73211_write_raw(indio_dev, chan, val, val2, mask);
+
+error_release:
+	iio_device_release_direct_mode(indio_dev);
+error_unlock:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static irqreturn_t as73211_ready_handler(int irq __always_unused, void *priv)
+{
+	struct as73211_data *data = iio_priv(priv);
+
+	complete(&data->completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t as73211_trigger_handler(int irq __always_unused, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct as73211_data *data = iio_priv(indio_dev);
+	struct {
+		__le16 chan[4];
+		s64 ts __aligned(8);
+	} scan;
+	int data_result, ret;
+
+	mutex_lock(&data->mutex);
+
+	data_result = as73211_req_data(data);
+	if (data_result < 0 && data_result != -EOVERFLOW)
+		goto done;  /* don't push any data for errors other than EOVERFLOW */
+
+	if (*indio_dev->active_scan_mask == AS73211_SCAN_MASK_ALL) {
+		/* Optimization for reading all (color + temperature) channels */
+		u8 addr = as73211_channels[0].address;
+		struct i2c_msg msgs[] = {
+			{
+				.addr = data->client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &addr,
+			},
+			{
+				.addr = data->client->addr,
+				.flags = I2C_M_RD,
+				.len = sizeof(scan.chan),
+				.buf = (u8 *)&scan.chan,
+			},
+		};
+
+		ret = i2c_transfer(data->client->adapter, msgs, ARRAY_SIZE(msgs));
+		if (ret < 0)
+			goto done;
+	} else {
+		/* Optimization for reading only color channels */
+
+		/* AS73211 starts reading at address 2 */
+		ret = i2c_master_recv(data->client,
+				(char *)&scan.chan[1], 3 * sizeof(scan.chan[1]));
+		if (ret < 0)
+			goto done;
+	}
+
+	if (data_result) {
+		/*
+		 * Saturate all channels (in case of overflows). Temperature channel
+		 * is not affected by overflows.
+		 */
+		scan.chan[1] = cpu_to_le16(U16_MAX);
+		scan.chan[2] = cpu_to_le16(U16_MAX);
+		scan.chan[3] = cpu_to_le16(U16_MAX);
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+
+done:
+	mutex_unlock(&data->mutex);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info as73211_info = {
+	.read_raw = as73211_read_raw,
+	.read_avail = as73211_read_avail,
+	.write_raw = as73211_write_raw,
+};
+
+static int as73211_power(struct iio_dev *indio_dev, bool state)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (state)
+		data->osr &= ~AS73211_OSR_PD;
+	else
+		data->osr |= AS73211_OSR_PD;
+
+	ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+
+	mutex_unlock(&data->mutex);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void as73211_power_disable(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	as73211_power(indio_dev, false);
+}
+
+static int as73211_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct as73211_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	mutex_init(&data->mutex);
+	init_completion(&data->completion);
+
+	indio_dev->info = &as73211_info;
+	indio_dev->name = AS73211_DRV_NAME;
+	indio_dev->channels = as73211_channels;
+	indio_dev->num_channels = ARRAY_SIZE(as73211_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+	if (ret < 0)
+		return ret;
+	data->osr = ret;
+
+	/* reset device */
+	data->osr |= AS73211_OSR_SW_RES;
+	ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+	if (ret < 0)
+		return ret;
+	data->osr = ret;
+
+	/*
+	 * Reading AGEN is only possible after reset (AGEN is not available if
+	 * device is in measurement mode).
+	 */
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_AGEN);
+	if (ret < 0)
+		return ret;
+
+	/* At the time of writing this driver, only DEVID 2 and MUT 1 are known. */
+	if ((ret & AS73211_AGEN_DEVID_MASK) != AS73211_AGEN_DEVID(2) ||
+	    (ret & AS73211_AGEN_MUT_MASK) != AS73211_AGEN_MUT(1))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG1);
+	if (ret < 0)
+		return ret;
+	data->creg1 = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG2);
+	if (ret < 0)
+		return ret;
+	data->creg2 = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG3);
+	if (ret < 0)
+		return ret;
+	data->creg3 = ret;
+	as73211_integration_time_calc_avail(data);
+
+	ret = as73211_power(indio_dev, true);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, as73211_power_disable, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, as73211_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL,
+				as73211_ready_handler,
+				IRQF_ONESHOT,
+				client->name, indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int __maybe_unused as73211_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+	return as73211_power(indio_dev, false);
+}
+
+static int __maybe_unused as73211_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+	return as73211_power(indio_dev, true);
+}
+
+static SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume);
+
+static const struct of_device_id as73211_of_match[] = {
+	{ .compatible = "ams,as73211" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, as73211_of_match);
+
+static const struct i2c_device_id as73211_id[] = {
+	{ "as73211", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, as73211_id);
+
+static struct i2c_driver as73211_driver = {
+	.driver = {
+		.name           = AS73211_DRV_NAME,
+		.of_match_table = as73211_of_match,
+		.pm             = &as73211_pm_ops,
+	},
+	.probe_new  = as73211_probe,
+	.id_table   = as73211_id,
+};
+module_i2c_driver(as73211_driver);
+
+MODULE_AUTHOR("Christian Eggers <[email protected]>");
+MODULE_DESCRIPTION("AS73211 XYZ True Color Sensor driver");
+MODULE_LICENSE("GPL");
author maintainer
#6 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

Hi Jonathan,

Quoted 7 lines · Jonathan Cameron

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!

where to add these entries in Documentation/ABI/testing/sysfs-bus-iio? Shall all missing entries be added together at the bottom (as AS73211 is the first device using it) , or inserted in different existing paragraphs (when the enums where introduced)?

Which kernel version shall I use (5.10)?

regards
Christian

maintainer
#7 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

Quoted 10 lines · On Fri, 7 Aug 2020 17:46:36 +0200 Christian Eggers <[email protected]> wrote:

Hi Jonathan,

Quoted 7 lines · Jonathan Cameron

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!

Quoted 4 lines

where to add these entries in Documentation/ABI/testing/sysfs-bus-iio? Shall all missing entries be added together at the bottom (as AS73211 is the first device using it) , or inserted in different existing paragraphs (when the enums where introduced)?

Insert them into the relevant groups that already exist. In some cases it will just be adding an entry with no specific explanation. For the _raw attribute add a bit more info about what x, y and z are (basically just say they are from cie1931 (I think?)

Quoted 2 lines

Which kernel version shall I use (5.10)?

This file doesn't change that quickly so that should be fine. I'll deal with any merge conflicts that do occur.

Thanks,

Jonathan

Quoted 7 lines

regards
Christian

author maintainer
#8 lore raw

PATCH 1/1 iio: documentation: light: Add as73211 sysfs documentation

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time

---

On Thursday, 6 August 2020, 19:44:51 CEST, Jonathan Cameron wrote:
Hi Jonathan,

Quoted 12 lines

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!
[...]
Insert them into the relevant groups that already exist. In some cases it will just be adding an entry with no specific explanation. For the _raw attribute add a bit more info about what x, y and z are (basically just say they are from cie1931 (I think?)

I added all sysfs entries which were not present in 5.8-rc6.

Best regards
Christian

 Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-bus-iio +25 -1
index d3e53a6d8331..14ae4bf053c5 100644
@@ -40,6 +40,7 @@ Description:
 		buffered samples and events for device X.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
 KernelVersion:	2.6.35
@@ -55,6 +56,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -374,6 +376,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -484,6 +489,7 @@ Description:
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +500,13 @@ Description:
 		Hardware applied gain factor. If shared across all channels,
 		<type>_hardwaregain is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Lists all available hardware applied gain factors. Shared across all
+		channels.
+
 What:		/sys/.../in_accel_filter_low_pass_3db_frequency
 What:		/sys/.../in_magn_filter_low_pass_3db_frequency
 What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -1333,6 +1346,7 @@ Description:
 		standardised CIE Erythemal Action Spectrum. UV index values range
 		from 0 (low) to >=11 (extreme).
 
+What:		/sys/.../iio:deviceX/in_intensity_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
@@ -1342,7 +1356,8 @@ KernelVersion:	3.12
 Contact:	[email protected]
 Description:
 		This attribute is used to get/set the integration time in
-		seconds.
+		seconds. If shared across all channels, <type>_integration_time
+		is used.
 
 What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
 KernelVersion:	4.0
@@ -1739,3 +1754,12 @@ KernelVersion:	5.5
 Contact:	[email protected]
 Description:
 		One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Unscaled light intensity according to CIE 1931/DIN 5033 color space.
+		Units after application of scale are nano nanowatts per square meter.
Signature · 8 lines
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
maintainer
#9 lore raw

Re: [PATCH] iio: documentation: light: Add as73211 sysfs documentation

Quoted 9 lines · On Sun, 9 Aug 2020 09:43:35 +0200 Christian Eggers <[email protected]> wrote:

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time

Hi Christian,

Just one tiny nitpick. Otherwise looks good to me!

Thanks for doing this,

Jonathan

Quoted 87 lines

---

On Thursday, 6 August 2020, 19:44:51 CEST, Jonathan Cameron wrote:
Hi Jonathan,

Quoted 12 lines

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!
[...]
Insert them into the relevant groups that already exist. In some cases it will just be adding an entry with no specific explanation. For the _raw attribute add a bit more info about what x, y and z are (basically just say they are from cie1931 (I think?)

I added all sysfs entries which were not present in 5.8-rc6.

Best regards
Christian

 Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-bus-iio +14 -0
index d3e53a6d8331..14ae4bf053c5 100644
@@ -40,6 +40,7 @@ Description:
 		buffered samples and events for device X.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
 KernelVersion:	2.6.35
@@ -55,6 +56,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -374,6 +376,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -484,6 +489,7 @@ Description:
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +500,13 @@ Description:
 		Hardware applied gain factor. If shared across all channels,
 		<type>_hardwaregain is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Lists all available hardware applied gain factors. Shared across all
+		channels.
+
 What:		/sys/.../in_accel_filter_low_pass_3db_frequency
 What:		/sys/.../in_magn_filter_low_pass_3db_frequency
 What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -1333,6 +1346,7 @@ Description:
 		standardised CIE Erythemal Action Spectrum. UV index values range
 		from 0 (low) to >=11 (extreme).
 
+What:		/sys/.../iio:deviceX/in_intensity_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time

Documentation/ABI/testing/sysfs-bus-iio KernelVersion: 3.12 · line 1360

Quoted 6 lines
Documentation/ABI/testing/sysfs-bus-iio +2 -1
@@ -1342,7 +1356,8 @@ KernelVersion:	3.12
 Contact:	[email protected]
 Description:
 		This attribute is used to get/set the integration time in
-		seconds.
+		seconds. If shared across all channels, <type>_integration_time
+		is used.

If it is shared across 'ALL' channels then it will be just integration_time If it is shared across all channels of a given type, it will be <type>_integration_time.

Quoted 16 lines
Documentation/ABI/testing/sysfs-bus-iio +9 -0
 What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
 KernelVersion:	4.0
@@ -1739,3 +1754,12 @@ KernelVersion:	5.5
 Contact:	[email protected]
 Description:
 		One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Unscaled light intensity according to CIE 1931/DIN 5033 color space.
+		Units after application of scale are nano nanowatts per square meter.
author maintainer
#10 lore raw

PATCH v2 1/1 iio: documentation: light: Add as73211 sysfs documentation

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time

---
Jonathan Cameron:

Quoted 2 lines

If it is shared across 'ALL' channels then it will be just integration_time If it is shared across all channels of a given type, it will be <type>_integration_time.

changed.

Best regards
Christian Eggers

 Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-bus-iio +25 -1
index d3e53a6d8331..388560149875 100644
@@ -40,6 +40,7 @@ Description:
 		buffered samples and events for device X.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
 KernelVersion:	2.6.35
@@ -55,6 +56,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -374,6 +376,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -484,6 +489,7 @@ Description:
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +500,13 @@ Description:
 		Hardware applied gain factor. If shared across all channels,
 		<type>_hardwaregain is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Lists all available hardware applied gain factors. Shared across all
+		channels.
+
 What:		/sys/.../in_accel_filter_low_pass_3db_frequency
 What:		/sys/.../in_magn_filter_low_pass_3db_frequency
 What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -1333,6 +1346,7 @@ Description:
 		standardised CIE Erythemal Action Spectrum. UV index values range
 		from 0 (low) to >=11 (extreme).
 
+What:		/sys/.../iio:deviceX/in_intensity_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
@@ -1342,7 +1356,8 @@ KernelVersion:	3.12
 Contact:	[email protected]
 Description:
 		This attribute is used to get/set the integration time in
-		seconds.
+		seconds. If shared across all channels of a given type,
+		<type>_integration_time is used.
 
 What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
 KernelVersion:	4.0
@@ -1739,3 +1754,12 @@ KernelVersion:	5.5
 Contact:	[email protected]
 Description:
 		One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Unscaled light intensity according to CIE 1931/DIN 5033 color space.
+		Units after application of scale are nano nanowatts per square meter.
Signature · 8 lines
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
maintainer Applied
#11 lore raw

Re: [PATCH v2] iio: documentation: light: Add as73211 sysfs documentation

Quoted 9 lines · On Mon, 10 Aug 2020 07:24:47 +0200 Christian Eggers <[email protected]> wrote:

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time

Applied.

Thanks,

Jonathan

Quoted 95 lines

---
Jonathan Cameron:

Quoted 2 lines

If it is shared across 'ALL' channels then it will be just integration_time If it is shared across all channels of a given type, it will be <type>_integration_time.

changed.

Best regards
Christian Eggers

 Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-bus-iio +25 -1
index d3e53a6d8331..388560149875 100644
@@ -40,6 +40,7 @@ Description:
 		buffered samples and events for device X.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
 KernelVersion:	2.6.35
@@ -55,6 +56,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -374,6 +376,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -484,6 +489,7 @@ Description:
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +500,13 @@ Description:
 		Hardware applied gain factor. If shared across all channels,
 		<type>_hardwaregain is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Lists all available hardware applied gain factors. Shared across all
+		channels.
+
 What:		/sys/.../in_accel_filter_low_pass_3db_frequency
 What:		/sys/.../in_magn_filter_low_pass_3db_frequency
 What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -1333,6 +1346,7 @@ Description:
 		standardised CIE Erythemal Action Spectrum. UV index values range
 		from 0 (low) to >=11 (extreme).
 
+What:		/sys/.../iio:deviceX/in_intensity_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
@@ -1342,7 +1356,8 @@ KernelVersion:	3.12
 Contact:	[email protected]
 Description:
 		This attribute is used to get/set the integration time in
-		seconds.
+		seconds. If shared across all channels of a given type,
+		<type>_integration_time is used.
 
 What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
 KernelVersion:	4.0
@@ -1739,3 +1754,12 @@ KernelVersion:	5.5
 Contact:	[email protected]
 Description:
 		One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion:	5.10
+Contact:	[email protected]
+Description:
+		Unscaled light intensity according to CIE 1931/DIN 5033 color space.
+		Units after application of scale are nano nanowatts per square meter.
#12 lore raw

Re: [PATCH] iio: documentation: light: Add as73211 sysfs documentation

In reply to Christian Eggers

Hi!

Quoted 6 lines

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)

Should that be hardware_gain ?
Pavel

author maintainer
#13 lore raw

Re: [PATCH] iio: documentation: light: Add as73211 sysfs documentation

Quoted 10 lines · Pavel Machek

Hi!

Quoted 6 lines

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)

Should that be hardware_gain ?

drivers/iio/industrialio-core.c:
[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",

Quoted 1 line

Pavel
regards
Christian

#14 lore raw

Re: [PATCH] iio: documentation: light: Add as73211 sysfs documentation

Quoted 10 lines · Christian Eggers
Quoted 9 lines · Pavel Machek

Hi!

Quoted 6 lines

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)

Quoted 3 lines
Quoted 1 line

Should that be hardware_gain ?

drivers/iio/industrialio-core.c:
[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",

Yep. Fix that before people start to really use it.
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#15 lore raw

Re: [PATCH] iio: documentation: light: Add as73211 sysfs documentation

Hi Pavel,

Quoted 11 lines · Pavel Machek
Quoted 10 lines · Christian Eggers
Quoted 9 lines · Pavel Machek

Hi!

Quoted 6 lines

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

Should that be hardware_gain ?

drivers/iio/industrialio-core.c:
[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",

Yep. Fix that before people start to really use it.

it's too late! IIO_CHAN_INFO_HARDWAREGAIN was introduced back in 2012. My patch only adds "hardwaregain" in a new context (of "intensity").

Quoted 1 line

Pavel

regards
Christian

maintainer
#16 lore raw

Re: [PATCH] iio: documentation: light: Add as73211 sysfs documentation

Quoted 14 lines · On Mon, 10 Aug 2020 15:24:39 +0200 Christian Eggers <[email protected]> wrote:

Hi Pavel,

Quoted 11 lines · Pavel Machek
Quoted 10 lines · Christian Eggers
Quoted 9 lines · Pavel Machek

Hi!

Quoted 6 lines

The driver for the as73211 light sensor provides the following not yet documented sysfs entries:

- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale

- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line

Should that be hardware_gain ?

drivers/iio/industrialio-core.c:
[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",

Yep. Fix that before people start to really use it.

it's too late! IIO_CHAN_INFO_HARDWAREGAIN was introduced back in 2012. My patch only adds "hardwaregain" in a new context (of "intensity").

Why do you think that is broken?

It was a deliberate decision to try and stop putting _'s into new elements because it was making userspace parsing harder. hardwaregain is a single 'token' in that file name.

We are stuck with some older forms that predate that decision and a few that are closely related to existing elements and hence had to maintain the 'spacing'. Those have to be special cased in tokenizing code. We don't want to introduced any more though.

One or two may have snuck through when we weren't awake of course.

Jonathan

Quoted 20 lines
Quoted 2 lines

Pavel

regards
Christian

________________________________
[http://assets.arri.com/media/sign/2020-04-03-E-mail-signature-Stellar2_V1.jpg] <https://microsites.arri.com/stellar/>

Get all the latest information from www.arri.com<https://www.arri.com/>, Facebook<https://www.facebook.com/TeamARRI>, Twitter<https://twitter.com/ARRIChannel>, Instagram<https://instagram.com/arri> and YouTube<https://www.youtube.com/user/ARRIChannel>.

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: München - Registergericht: Amtsgericht München - Handelsregisternummer: HRA 57918 Persönlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: München - Registergericht: Amtsgericht München - Handelsregisternummer: HRB 54477 Geschäftsführer: Dr. Michael Neuhäuser; Stephan Schenk; Walter Trauninger; Markus Zeiler

maintainer
#17 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

In reply to Jonathan Cameron
Quoted 24 lines · On Thu, 6 Aug 2020 18:44:51 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 6 lines · On Wed, 5 Aug 2020 07:57:44 +0200 Christian Eggers <[email protected]> wrote:

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered measurements, an external (software) trigger driver like iio-trig-hrtimer or iio-trig-sysfs is required.

Quoted 6 lines

The sensor supports single and continuous measurement modes. The latter is not used by design as this would require tight timing synchronization between hardware and driver without much benefit.

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!

Quoted 6 lines

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Unfortunatey I don't have the thread on this account / machine so I'll reply here.

0-day highlighted an issue in here and Andy sent a suggested fix.

What Andy suggested almost works but there are some subtleties. So before I make the change directly on the patch I wanted to confirm I haven't gotten it horribly wrong!

I'm proposing just halving the range of the loop. See below.

Thanks,

Jonathan

Quoted 171 lines
Quoted 171 lines

---
 MAINTAINERS                 |   7 +
 drivers/iio/light/Kconfig   |  15 +
 drivers/iio/light/Makefile  |   1 +
 drivers/iio/light/as73211.c | 801 ++++++++++++++++++++++++++++++++++++
 4 files changed, 824 insertions(+)
 create mode 100644 drivers/iio/light/as73211.c
MAINTAINERS +7 -0
index 068d6e94122b..673570414147 100644
@@ -934,6 +934,13 @@ S:	Supported
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:	drivers/net/ethernet/amd/xgbe/
 
+AMS AS73211 DRIVER
+M:	Christian Eggers <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+F:	drivers/iio/light/as73211.c
+
 ANALOG DEVICES INC AD5686 DRIVER
 M:	Michael Hennerich <[email protected]>
 L:	[email protected]
drivers/iio/light/Kconfig +15 -0
index 182bd18c4bb2..cade6dc0305b 100644
@@ -86,6 +86,21 @@ config APDS9960
 	  To compile this driver as a module, choose M here: the
 	  module will be called apds9960
 
+config AS73211
+	tristate "AMS AS73211 XYZ color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the AMS AS73211
+	 JENCOLOR(R) Digital XYZ Sensor.
+
+	 For triggered measurements, you will need an additional trigger driver
+	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called as73211.
+
 config BH1750
 	tristate "ROHM BH1750 ambient light sensor"
 	depends on I2C
drivers/iio/light/Makefile +1 -0
index d1c8aa30b9a8..ea376deaca54 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010)		+= al3010.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_APDS9960)		+= apds9960.o
+obj-$(CONFIG_AS73211)		+= as73211.o
 obj-$(CONFIG_BH1750)		+= bh1750.o
 obj-$(CONFIG_BH1780)		+= bh1780.o
 obj-$(CONFIG_CM32181)		+= cm32181.o
drivers/iio/light/as73211.c new file +99 -0
new file mode 100644
index 000000000000..3383aaacbf52
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+ *
+ * Author: Christian Eggers <[email protected]>
+ *
+ * Copyright (c) 2020 ARRI Lighting
+ *
+ * Color light sensor with 16-bit channels for x, y, z and temperature);
+ * 7-bit I2C slave address 0x74 .. 0x77.
+ *
+ * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+
+#define HZ_PER_KHZ 1000
+
+#define AS73211_DRV_NAME "as73211"
+
+/* AS73211 configuration registers */
+#define AS73211_REG_OSR    0x0
+#define AS73211_REG_AGEN   0x2
+#define AS73211_REG_CREG1  0x6
+#define AS73211_REG_CREG2  0x7
+#define AS73211_REG_CREG3  0x8
+
+/* AS73211 output register bank */
+#define AS73211_OUT_OSR_STATUS    0
+#define AS73211_OUT_TEMP          1
+#define AS73211_OUT_MRES1         2
+#define AS73211_OUT_MRES2         3
+#define AS73211_OUT_MRES3         4
+
+#define AS73211_OSR_SS            BIT(7)
+#define AS73211_OSR_PD            BIT(6)
+#define AS73211_OSR_SW_RES        BIT(3)
+#define AS73211_OSR_DOS_MASK      GENMASK(2, 0)
+#define AS73211_OSR_DOS_CONFIG    FIELD_PREP(AS73211_OSR_DOS_MASK, 0x2)
+#define AS73211_OSR_DOS_MEASURE   FIELD_PREP(AS73211_OSR_DOS_MASK, 0x3)
+
+#define AS73211_AGEN_DEVID_MASK   GENMASK(7, 4)
+#define AS73211_AGEN_DEVID(x)     FIELD_PREP(AS73211_AGEN_DEVID_MASK, (x))
+#define AS73211_AGEN_MUT_MASK     GENMASK(3, 0)
+#define AS73211_AGEN_MUT(x)       FIELD_PREP(AS73211_AGEN_MUT_MASK, (x))
+
+#define AS73211_CREG1_GAIN_MASK   GENMASK(7, 4)
+#define AS73211_CREG1_GAIN_1      13
+#define AS73211_CREG1_TIME_MASK   GENMASK(3, 0)
+
+#define AS73211_CREG3_CCLK_MASK   GENMASK(1, 0)
+
+#define AS73211_OSR_STATUS_OUTCONVOF  BIT(15)
+#define AS73211_OSR_STATUS_MRESOF     BIT(14)
+#define AS73211_OSR_STATUS_ADCOF      BIT(13)
+#define AS73211_OSR_STATUS_LDATA      BIT(12)
+#define AS73211_OSR_STATUS_NDATA      BIT(11)
+#define AS73211_OSR_STATUS_NOTREADY   BIT(10)
+
+#define AS73211_SAMPLE_FREQ_BASE      1024000
+
+#define AS73211_SAMPLE_TIME_NUM       15
+#define AS73211_SAMPLE_TIME_MAX_MS    BIT(AS73211_SAMPLE_TIME_NUM - 1)
+
+/* Available sample frequencies are 1.024MHz multiplied by powers of two. */
+static const int as73211_samp_freq_avail[] = {
+	AS73211_SAMPLE_FREQ_BASE * 1,
+	AS73211_SAMPLE_FREQ_BASE * 2,
+	AS73211_SAMPLE_FREQ_BASE * 4,
+	AS73211_SAMPLE_FREQ_BASE * 8,
+};
+
+static const int as73211_hardwaregain_avail[] = {
+	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
+};
+
+/**
+ * struct as73211_data - Instance data for one AS73211
+ * @client: I2C client.
+ * @osr:    Cached Operational State Register.
+ * @creg1:  Cached Configuration Register 1.
+ * @creg2:  Cached Configuration Register 2.
+ * @creg3:  Cached Configuration Register 3.
+ * @mutex:  Keeps cached registers in sync with the device.
+ * @completion: Completion to wait for interrupt.
+ * @int_time_avail: Available integration times (depend on sampling frequency).
+ */
+struct as73211_data {
Quoted 8 lines

drivers/iio/light/as73211.c line 107

Quoted 8 lines
drivers/iio/light/as73211.c new file +8 -0
+	struct i2c_client *client;
+	u8 osr;
+	u8 creg1;
+	u8 creg2;
+	u8 creg3;
+	struct mutex mutex;
+	struct completion completion;
+	int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2];

This is a flat array, as get_avail assumes.

Quoted 95 lines
Quoted 95 lines
drivers/iio/light/as73211.c new file +95 -0
+};
+
+#define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_type = \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.info_mask_shared_by_type_available = \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.channel2 = IIO_MOD_##_color, \
+	.address = _addr, \
+	.scan_index = _si, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_LE, \
+	}, \
+}
+
+#define AS73211_OFFSET_TEMP_INT    (-66)
+#define AS73211_OFFSET_TEMP_MICRO  900000
+#define AS73211_SCALE_TEMP_INT     0
+#define AS73211_SCALE_TEMP_MICRO   50000
+
+#define AS73211_SCALE_X 277071108  /* nW/m^2 */
+#define AS73211_SCALE_Y 298384270  /* nW/m^2 */
+#define AS73211_SCALE_Z 160241927  /* nW/m^2 */
+
+/* Channel order MUST match devices result register order */
+#define AS73211_SCAN_INDEX_TEMP 0
+#define AS73211_SCAN_INDEX_X    1
+#define AS73211_SCAN_INDEX_Y    2
+#define AS73211_SCAN_INDEX_Z    3
+#define AS73211_SCAN_INDEX_TS   4
+
+#define AS73211_SCAN_MASK_COLOR ( \
+	BIT(AS73211_SCAN_INDEX_X) |   \
+	BIT(AS73211_SCAN_INDEX_Y) |   \
+	BIT(AS73211_SCAN_INDEX_Z))
+
+#define AS73211_SCAN_MASK_ALL (    \
+	BIT(AS73211_SCAN_INDEX_TEMP) | \
+	AS73211_SCAN_MASK_COLOR)
+
+static const struct iio_chan_spec as73211_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_OFFSET) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.address = AS73211_OUT_TEMP,
+		.scan_index = AS73211_SCAN_INDEX_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		}
+	},
+	AS73211_COLOR_CHANNEL(X, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1),
+	AS73211_COLOR_CHANNEL(Y, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2),
+	AS73211_COLOR_CHANNEL(Z, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3),
+	IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS),
+};
+
+static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data)
+{
+	/*
+	 * Return integration time in units of 1024 clock cycles. Integration time
+	 * in CREG1 is in powers of 2 (x 1024 cycles).
+	 */
+	return BIT(FIELD_GET(AS73211_CREG1_TIME_MASK, data->creg1));
+}
+
+static unsigned int as73211_integration_time_us(struct as73211_data *data,
+						 unsigned int integration_time_1024cyc)
+{
+	/*
+	 * f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz)
+	 * t_cycl is configured in CREG1 in powers of 2 (x 1024 cycles)
+	 * t_int_us = 1 / (f_samp) * t_cycl * US_PER_SEC
+	 *          = 1 / (2^CREG3_CCLK * 1,024,000) * 2^CREG1_CYCLES * 1,024 * US_PER_SEC
+	 *          = 2^(-CREG3_CCLK) * 2^CREG1_CYCLES * 1,000
+	 * In order to get rid of negative exponents, we extend the "fraction"
+	 * by 2^3 (CREG3_CCLK,max = 3)
+	 * t_int_us = 2^(3-CREG3_CCLK) * 2^CREG1_CYCLES * 125
+	 */
+	return BIT(3 - FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
Quoted 8 lines

drivers/iio/light/as73211.c line 210

Quoted 8 lines
drivers/iio/light/as73211.c new file +8 -0
+		integration_time_1024cyc * 125;
+}
+
+static void as73211_integration_time_calc_avail(struct as73211_data *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->int_time_avail); i++) {

This loops goes to double the size of the array.

I'd propose to just do ARRAY_SIZE(data->int_time_avail) / 2 here

Quoted 211 lines
Quoted 211 lines
drivers/iio/light/as73211.c new file +211 -0
+		unsigned int time_us = as73211_integration_time_us(data, BIT(i));
+
+		data->int_time_avail[i * 2 + 0] = time_us / USEC_PER_SEC;
+		data->int_time_avail[i * 2 + 1] = time_us % USEC_PER_SEC;
+	}
+}
+
+static unsigned int as73211_gain(struct as73211_data *data)
+{
+	/* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+	return BIT(AS73211_CREG1_GAIN_1 - FIELD_GET(AS73211_CREG1_GAIN_MASK, data->creg1));
+}
+
+/* must be called with as73211_data::mutex held. */
+static int as73211_req_data(struct as73211_data *data)
+{
+	unsigned int time_us = as73211_integration_time_us(data,
+							    as73211_integration_time_1024cyc(data));
+	struct device *dev = &data->client->dev;
+	union i2c_smbus_data smbus_data;
+	u16 osr_status;
+	int ret;
+
+	if (data->client->irq)
+		reinit_completion(&data->completion);
+
+	/*
+	 * During measurement, there should be no traffic on the i2c bus as the
+	 * electrical noise would disturb the measurement process.
+	 */
+	i2c_lock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+	data->osr &= ~AS73211_OSR_DOS_MASK;
+	data->osr |= AS73211_OSR_DOS_MEASURE | AS73211_OSR_SS;
+
+	smbus_data.byte = data->osr;
+	ret = __i2c_smbus_xfer(data->client->adapter, data->client->addr,
+			data->client->flags, I2C_SMBUS_WRITE,
+			AS73211_REG_OSR, I2C_SMBUS_BYTE_DATA, &smbus_data);
+	if (ret < 0) {
+		i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+		return ret;
+	}
+
+	/*
+	 * Reset AS73211_OSR_SS (is self clearing) in order to avoid unintentional
+	 * triggering of further measurements later.
+	 */
+	data->osr &= ~AS73211_OSR_SS;
+
+	/*
+	 * Add some extra margin for the timeout. sensor timing is not as precise
+	 * as our one ...
+	 */
+	time_us += time_us / 8;
+	if (data->client->irq) {
+		ret = wait_for_completion_timeout(&data->completion, usecs_to_jiffies(time_us));
+		if (!ret) {
+			dev_err(dev, "timeout waiting for READY IRQ\n");
+			i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+			return -ETIMEDOUT;
+		}
+	} else {
+		/* Wait integration time */
+		usleep_range(time_us, 2 * time_us);
+	}
+
+	i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+	ret = i2c_smbus_read_word_data(data->client, AS73211_OUT_OSR_STATUS);
+	if (ret < 0)
+		return ret;
+
+	osr_status = ret;
+	if (osr_status != (AS73211_OSR_DOS_MEASURE | AS73211_OSR_STATUS_NDATA)) {
+		if (osr_status & AS73211_OSR_SS) {
+			dev_err(dev, "%s() Measurement has not stopped\n", __func__);
+			return -ETIME;
+		}
+		if (osr_status & AS73211_OSR_STATUS_NOTREADY) {
+			dev_err(dev, "%s() Data is not ready\n", __func__);
+			return -ENODATA;
+		}
+		if (!(osr_status & AS73211_OSR_STATUS_NDATA)) {
+			dev_err(dev, "%s() No new data available\n", __func__);
+			return -ENODATA;
+		}
+		if (osr_status & AS73211_OSR_STATUS_LDATA) {
+			dev_err(dev, "%s() Result buffer overrun\n", __func__);
+			return -ENOBUFS;
+		}
+		if (osr_status & AS73211_OSR_STATUS_ADCOF) {
+			dev_err(dev, "%s() ADC overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		if (osr_status & AS73211_OSR_STATUS_MRESOF) {
+			dev_err(dev, "%s() Measurement result overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		if (osr_status & AS73211_OSR_STATUS_OUTCONVOF) {
+			dev_err(dev, "%s() Timer overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		dev_err(dev, "%s() Unexpected status value\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		int ret;
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		ret = as73211_req_data(data);
+		if (ret < 0) {
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		}
+
+		ret = i2c_smbus_read_word_data(data->client, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		*val = ret;
+		return IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = AS73211_OFFSET_TEMP_INT;
+		*val2 = AS73211_OFFSET_TEMP_MICRO;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = AS73211_SCALE_TEMP_INT;
+			*val2 = AS73211_SCALE_TEMP_MICRO;
+			return IIO_VAL_INT_PLUS_MICRO;
+
+		case IIO_INTENSITY: {
+			unsigned int scale;
+
+			switch (chan->channel2) {
+			case IIO_MOD_X:
+				scale = AS73211_SCALE_X;
+				break;
+			case IIO_MOD_Y:
+				scale = AS73211_SCALE_Y;
+				break;
+			case IIO_MOD_Z:
+				scale = AS73211_SCALE_Z;
+				break;
+			default:
+				return -EINVAL;
+			}
+			scale /= as73211_gain(data);
+			scale /= as73211_integration_time_1024cyc(data);
+			*val = scale;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}}
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+		*val = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+			AS73211_SAMPLE_FREQ_BASE;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*val = as73211_gain(data);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_INT_TIME: {
+		unsigned int time_us;
+
+		mutex_lock(&data->mutex);
+		time_us = as73211_integration_time_us(data, as73211_integration_time_1024cyc(data));
+		mutex_unlock(&data->mutex);
+		*val = time_us / USEC_PER_SEC;
+		*val2 = time_us % USEC_PER_SEC;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}}
+}
+
+static int as73211_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(as73211_samp_freq_avail);
+		*vals = as73211_samp_freq_avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+
Quoted 8 lines

drivers/iio/light/as73211.c line 429

Quoted 8 lines
drivers/iio/light/as73211.c new file +8 -0
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*length = ARRAY_SIZE(as73211_hardwaregain_avail);
+		*vals = as73211_hardwaregain_avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(data->int_time_avail);

This length is correct as read_avail expects it to be double the number of entries, if using IIO_VAL_INT_PLUS_MICRO.

Quoted 373 lines
Quoted 372 lines
drivers/iio/light/as73211.c new file +372 -0
+		*vals = data->int_time_avail;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int _as73211_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan __always_unused,
+			       int val, int val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		int reg_bits, freq_kHz = val / HZ_PER_KHZ;  /* 1024, 2048, ... */
+
+		/* val must be 1024 * 2^x */
+		if (val < 0 || (freq_kHz * HZ_PER_KHZ) != val ||
+				!is_power_of_2(freq_kHz) || val2)
+			return -EINVAL;
+
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz (=2^10)) */
+		reg_bits = ilog2(freq_kHz) - 10;
+		if (!FIELD_FIT(AS73211_CREG3_CCLK_MASK, reg_bits))
+			return -EINVAL;
+
+		data->creg3 &= ~AS73211_CREG3_CCLK_MASK;
+		data->creg3 |= FIELD_PREP(AS73211_CREG3_CCLK_MASK, reg_bits);
+		as73211_integration_time_calc_avail(data);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG3, data->creg3);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	}
+	case IIO_CHAN_INFO_HARDWAREGAIN: {
+		unsigned int reg_bits;
+
+		if (val < 0 || !is_power_of_2(val) || val2)
+			return -EINVAL;
+
+		/* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+		reg_bits = AS73211_CREG1_GAIN_1 - ilog2(val);
+		if (!FIELD_FIT(AS73211_CREG1_GAIN_MASK, reg_bits))
+			return -EINVAL;
+
+		data->creg1 &= ~AS73211_CREG1_GAIN_MASK;
+		data->creg1 |= FIELD_PREP(AS73211_CREG1_GAIN_MASK, reg_bits);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	}
+	case IIO_CHAN_INFO_INT_TIME: {
+		int val_us = val * USEC_PER_SEC + val2;
+		int time_ms;
+		int reg_bits;
+
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+		int f_samp_1_024mhz = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3));
+
+		/*
+		 * time_ms = time_us * US_PER_MS * f_samp_1_024mhz / MHZ_PER_HZ
+		 *         = time_us * f_samp_1_024mhz / 1000
+		 */
+		time_ms = (val_us * f_samp_1_024mhz) / 1000;  /* 1 ms, 2 ms, ... (power of two) */
+		if (time_ms < 0 || !is_power_of_2(time_ms) || time_ms > AS73211_SAMPLE_TIME_MAX_MS)
+			return -EINVAL;
+
+		reg_bits = ilog2(time_ms);
+		if (!FIELD_FIT(AS73211_CREG1_TIME_MASK, reg_bits))
+			return -EINVAL;  /* not possible due to previous tests */
+
+		data->creg1 &= ~AS73211_CREG1_TIME_MASK;
+		data->creg1 |= FIELD_PREP(AS73211_CREG1_TIME_MASK, reg_bits);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+
+	default:
+		return -EINVAL;
+	}}
+}
+
+static int as73211_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret < 0)
+		goto error_unlock;
+
+	/* Need to switch to config mode ... */
+	if ((data->osr & AS73211_OSR_DOS_MASK) != AS73211_OSR_DOS_CONFIG) {
+		data->osr &= ~AS73211_OSR_DOS_MASK;
+		data->osr |= AS73211_OSR_DOS_CONFIG;
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+		if (ret < 0)
+			goto error_release;
+	}
+
+	ret = _as73211_write_raw(indio_dev, chan, val, val2, mask);
+
+error_release:
+	iio_device_release_direct_mode(indio_dev);
+error_unlock:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static irqreturn_t as73211_ready_handler(int irq __always_unused, void *priv)
+{
+	struct as73211_data *data = iio_priv(priv);
+
+	complete(&data->completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t as73211_trigger_handler(int irq __always_unused, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct as73211_data *data = iio_priv(indio_dev);
+	struct {
+		__le16 chan[4];
+		s64 ts __aligned(8);
+	} scan;
+	int data_result, ret;
+
+	mutex_lock(&data->mutex);
+
+	data_result = as73211_req_data(data);
+	if (data_result < 0 && data_result != -EOVERFLOW)
+		goto done;  /* don't push any data for errors other than EOVERFLOW */
+
+	if (*indio_dev->active_scan_mask == AS73211_SCAN_MASK_ALL) {
+		/* Optimization for reading all (color + temperature) channels */
+		u8 addr = as73211_channels[0].address;
+		struct i2c_msg msgs[] = {
+			{
+				.addr = data->client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &addr,
+			},
+			{
+				.addr = data->client->addr,
+				.flags = I2C_M_RD,
+				.len = sizeof(scan.chan),
+				.buf = (u8 *)&scan.chan,
+			},
+		};
+
+		ret = i2c_transfer(data->client->adapter, msgs, ARRAY_SIZE(msgs));
+		if (ret < 0)
+			goto done;
+	} else {
+		/* Optimization for reading only color channels */
+
+		/* AS73211 starts reading at address 2 */
+		ret = i2c_master_recv(data->client,
+				(char *)&scan.chan[1], 3 * sizeof(scan.chan[1]));
+		if (ret < 0)
+			goto done;
+	}
+
+	if (data_result) {
+		/*
+		 * Saturate all channels (in case of overflows). Temperature channel
+		 * is not affected by overflows.
+		 */
+		scan.chan[1] = cpu_to_le16(U16_MAX);
+		scan.chan[2] = cpu_to_le16(U16_MAX);
+		scan.chan[3] = cpu_to_le16(U16_MAX);
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+
+done:
+	mutex_unlock(&data->mutex);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info as73211_info = {
+	.read_raw = as73211_read_raw,
+	.read_avail = as73211_read_avail,
+	.write_raw = as73211_write_raw,
+};
+
+static int as73211_power(struct iio_dev *indio_dev, bool state)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (state)
+		data->osr &= ~AS73211_OSR_PD;
+	else
+		data->osr |= AS73211_OSR_PD;
+
+	ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+
+	mutex_unlock(&data->mutex);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void as73211_power_disable(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	as73211_power(indio_dev, false);
+}
+
+static int as73211_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct as73211_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	mutex_init(&data->mutex);
+	init_completion(&data->completion);
+
+	indio_dev->info = &as73211_info;
+	indio_dev->name = AS73211_DRV_NAME;
+	indio_dev->channels = as73211_channels;
+	indio_dev->num_channels = ARRAY_SIZE(as73211_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+	if (ret < 0)
+		return ret;
+	data->osr = ret;
+
+	/* reset device */
+	data->osr |= AS73211_OSR_SW_RES;
+	ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+	if (ret < 0)
+		return ret;
+	data->osr = ret;
+
+	/*
+	 * Reading AGEN is only possible after reset (AGEN is not available if
+	 * device is in measurement mode).
+	 */
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_AGEN);
+	if (ret < 0)
+		return ret;
+
+	/* At the time of writing this driver, only DEVID 2 and MUT 1 are known. */
+	if ((ret & AS73211_AGEN_DEVID_MASK) != AS73211_AGEN_DEVID(2) ||
+	    (ret & AS73211_AGEN_MUT_MASK) != AS73211_AGEN_MUT(1))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG1);
+	if (ret < 0)
+		return ret;
+	data->creg1 = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG2);
+	if (ret < 0)
+		return ret;
+	data->creg2 = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG3);
+	if (ret < 0)
+		return ret;
+	data->creg3 = ret;
+	as73211_integration_time_calc_avail(data);
+
+	ret = as73211_power(indio_dev, true);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, as73211_power_disable, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, as73211_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL,
+				as73211_ready_handler,
+				IRQF_ONESHOT,
+				client->name, indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int __maybe_unused as73211_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+	return as73211_power(indio_dev, false);
+}
+
+static int __maybe_unused as73211_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+	return as73211_power(indio_dev, true);
+}
+
+static SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume);
+
+static const struct of_device_id as73211_of_match[] = {
+	{ .compatible = "ams,as73211" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, as73211_of_match);
+
+static const struct i2c_device_id as73211_id[] = {
+	{ "as73211", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, as73211_id);
+
+static struct i2c_driver as73211_driver = {
+	.driver = {
+		.name           = AS73211_DRV_NAME,
+		.of_match_table = as73211_of_match,
+		.pm             = &as73211_pm_ops,
+	},
+	.probe_new  = as73211_probe,
+	.id_table   = as73211_id,
+};
+module_i2c_driver(as73211_driver);
+
+MODULE_AUTHOR("Christian Eggers <[email protected]>");
+MODULE_DESCRIPTION("AS73211 XYZ True Color Sensor driver");
+MODULE_LICENSE("GPL");  
#18 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

Quoted 36 lines · On Tue, 1 Sep 2020 19:46:00 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 24 lines · On Thu, 6 Aug 2020 18:44:51 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 6 lines · On Wed, 5 Aug 2020 07:57:44 +0200 Christian Eggers <[email protected]> wrote:

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered measurements, an external (software) trigger driver like iio-trig-hrtimer or iio-trig-sysfs is required.

Quoted 6 lines

The sensor supports single and continuous measurement modes. The latter is not used by design as this would require tight timing synchronization between hardware and driver without much benefit.

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf

Hi Christian,

I'll take this, but please send a follow up patch to add documentation for in_intensity_x_raw and all the other new ABI this adds in Documentation/ABI/testing/sysfs-bus-iio
I should have mentioned that earlier, but kind of assumed we already had these documented for some reason!

Quoted 6 lines

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Unfortunatey I don't have the thread on this account / machine so I'll reply here.

Quoted 7 lines

0-day highlighted an issue in here and Andy sent a suggested fix.

What Andy suggested almost works but there are some subtleties. So before I make the change directly on the patch I wanted to confirm I haven't gotten it horribly wrong!

I'm proposing just halving the range of the loop. See below.

I've done this halving change because I'm fairly sure it's right and want to get a clean report from 0-day before I do a pull request at the weekend. Still time to change if anyone shouts quickly. If not there is still plenty of time for a fix.

Thanks,

Jonathan

Quoted 892 lines

Thanks,

Jonathan

Quoted 171 lines
Quoted 171 lines
  
---
 MAINTAINERS                 |   7 +
 drivers/iio/light/Kconfig   |  15 +
 drivers/iio/light/Makefile  |   1 +
 drivers/iio/light/as73211.c | 801 ++++++++++++++++++++++++++++++++++++
 4 files changed, 824 insertions(+)
 create mode 100644 drivers/iio/light/as73211.c
MAINTAINERS +7 -0
index 068d6e94122b..673570414147 100644
@@ -934,6 +934,13 @@ S:	Supported
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:	drivers/net/ethernet/amd/xgbe/
 
+AMS AS73211 DRIVER
+M:	Christian Eggers <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+F:	drivers/iio/light/as73211.c
+
 ANALOG DEVICES INC AD5686 DRIVER
 M:	Michael Hennerich <[email protected]>
 L:	[email protected]
drivers/iio/light/Kconfig +15 -0
index 182bd18c4bb2..cade6dc0305b 100644
@@ -86,6 +86,21 @@ config APDS9960
 	  To compile this driver as a module, choose M here: the
 	  module will be called apds9960
 
+config AS73211
+	tristate "AMS AS73211 XYZ color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the AMS AS73211
+	 JENCOLOR(R) Digital XYZ Sensor.
+
+	 For triggered measurements, you will need an additional trigger driver
+	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called as73211.
+
 config BH1750
 	tristate "ROHM BH1750 ambient light sensor"
 	depends on I2C
drivers/iio/light/Makefile +1 -0
index d1c8aa30b9a8..ea376deaca54 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010)		+= al3010.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_APDS9960)		+= apds9960.o
+obj-$(CONFIG_AS73211)		+= as73211.o
 obj-$(CONFIG_BH1750)		+= bh1750.o
 obj-$(CONFIG_BH1780)		+= bh1780.o
 obj-$(CONFIG_CM32181)		+= cm32181.o
drivers/iio/light/as73211.c new file +99 -0
new file mode 100644
index 000000000000..3383aaacbf52
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+ *
+ * Author: Christian Eggers <[email protected]>
+ *
+ * Copyright (c) 2020 ARRI Lighting
+ *
+ * Color light sensor with 16-bit channels for x, y, z and temperature);
+ * 7-bit I2C slave address 0x74 .. 0x77.
+ *
+ * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+
+#define HZ_PER_KHZ 1000
+
+#define AS73211_DRV_NAME "as73211"
+
+/* AS73211 configuration registers */
+#define AS73211_REG_OSR    0x0
+#define AS73211_REG_AGEN   0x2
+#define AS73211_REG_CREG1  0x6
+#define AS73211_REG_CREG2  0x7
+#define AS73211_REG_CREG3  0x8
+
+/* AS73211 output register bank */
+#define AS73211_OUT_OSR_STATUS    0
+#define AS73211_OUT_TEMP          1
+#define AS73211_OUT_MRES1         2
+#define AS73211_OUT_MRES2         3
+#define AS73211_OUT_MRES3         4
+
+#define AS73211_OSR_SS            BIT(7)
+#define AS73211_OSR_PD            BIT(6)
+#define AS73211_OSR_SW_RES        BIT(3)
+#define AS73211_OSR_DOS_MASK      GENMASK(2, 0)
+#define AS73211_OSR_DOS_CONFIG    FIELD_PREP(AS73211_OSR_DOS_MASK, 0x2)
+#define AS73211_OSR_DOS_MEASURE   FIELD_PREP(AS73211_OSR_DOS_MASK, 0x3)
+
+#define AS73211_AGEN_DEVID_MASK   GENMASK(7, 4)
+#define AS73211_AGEN_DEVID(x)     FIELD_PREP(AS73211_AGEN_DEVID_MASK, (x))
+#define AS73211_AGEN_MUT_MASK     GENMASK(3, 0)
+#define AS73211_AGEN_MUT(x)       FIELD_PREP(AS73211_AGEN_MUT_MASK, (x))
+
+#define AS73211_CREG1_GAIN_MASK   GENMASK(7, 4)
+#define AS73211_CREG1_GAIN_1      13
+#define AS73211_CREG1_TIME_MASK   GENMASK(3, 0)
+
+#define AS73211_CREG3_CCLK_MASK   GENMASK(1, 0)
+
+#define AS73211_OSR_STATUS_OUTCONVOF  BIT(15)
+#define AS73211_OSR_STATUS_MRESOF     BIT(14)
+#define AS73211_OSR_STATUS_ADCOF      BIT(13)
+#define AS73211_OSR_STATUS_LDATA      BIT(12)
+#define AS73211_OSR_STATUS_NDATA      BIT(11)
+#define AS73211_OSR_STATUS_NOTREADY   BIT(10)
+
+#define AS73211_SAMPLE_FREQ_BASE      1024000
+
+#define AS73211_SAMPLE_TIME_NUM       15
+#define AS73211_SAMPLE_TIME_MAX_MS    BIT(AS73211_SAMPLE_TIME_NUM - 1)
+
+/* Available sample frequencies are 1.024MHz multiplied by powers of two. */
+static const int as73211_samp_freq_avail[] = {
+	AS73211_SAMPLE_FREQ_BASE * 1,
+	AS73211_SAMPLE_FREQ_BASE * 2,
+	AS73211_SAMPLE_FREQ_BASE * 4,
+	AS73211_SAMPLE_FREQ_BASE * 8,
+};
+
+static const int as73211_hardwaregain_avail[] = {
+	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
+};
+
+/**
+ * struct as73211_data - Instance data for one AS73211
+ * @client: I2C client.
+ * @osr:    Cached Operational State Register.
+ * @creg1:  Cached Configuration Register 1.
+ * @creg2:  Cached Configuration Register 2.
+ * @creg3:  Cached Configuration Register 3.
+ * @mutex:  Keeps cached registers in sync with the device.
+ * @completion: Completion to wait for interrupt.
+ * @int_time_avail: Available integration times (depend on sampling frequency).
+ */
+struct as73211_data {
Quoted 8 lines

drivers/iio/light/as73211.c line 107

Quoted 8 lines
drivers/iio/light/as73211.c new file +8 -0
+	struct i2c_client *client;
+	u8 osr;
+	u8 creg1;
+	u8 creg2;
+	u8 creg3;
+	struct mutex mutex;
+	struct completion completion;
+	int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2];  

This is a flat array, as get_avail assumes.

Quoted 95 lines
Quoted 95 lines
drivers/iio/light/as73211.c new file +95 -0
+};
+
+#define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_type = \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.info_mask_shared_by_type_available = \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+		BIT(IIO_CHAN_INFO_INT_TIME), \
+	.channel2 = IIO_MOD_##_color, \
+	.address = _addr, \
+	.scan_index = _si, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_LE, \
+	}, \
+}
+
+#define AS73211_OFFSET_TEMP_INT    (-66)
+#define AS73211_OFFSET_TEMP_MICRO  900000
+#define AS73211_SCALE_TEMP_INT     0
+#define AS73211_SCALE_TEMP_MICRO   50000
+
+#define AS73211_SCALE_X 277071108  /* nW/m^2 */
+#define AS73211_SCALE_Y 298384270  /* nW/m^2 */
+#define AS73211_SCALE_Z 160241927  /* nW/m^2 */
+
+/* Channel order MUST match devices result register order */
+#define AS73211_SCAN_INDEX_TEMP 0
+#define AS73211_SCAN_INDEX_X    1
+#define AS73211_SCAN_INDEX_Y    2
+#define AS73211_SCAN_INDEX_Z    3
+#define AS73211_SCAN_INDEX_TS   4
+
+#define AS73211_SCAN_MASK_COLOR ( \
+	BIT(AS73211_SCAN_INDEX_X) |   \
+	BIT(AS73211_SCAN_INDEX_Y) |   \
+	BIT(AS73211_SCAN_INDEX_Z))
+
+#define AS73211_SCAN_MASK_ALL (    \
+	BIT(AS73211_SCAN_INDEX_TEMP) | \
+	AS73211_SCAN_MASK_COLOR)
+
+static const struct iio_chan_spec as73211_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_OFFSET) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.address = AS73211_OUT_TEMP,
+		.scan_index = AS73211_SCAN_INDEX_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		}
+	},
+	AS73211_COLOR_CHANNEL(X, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1),
+	AS73211_COLOR_CHANNEL(Y, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2),
+	AS73211_COLOR_CHANNEL(Z, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3),
+	IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS),
+};
+
+static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data)
+{
+	/*
+	 * Return integration time in units of 1024 clock cycles. Integration time
+	 * in CREG1 is in powers of 2 (x 1024 cycles).
+	 */
+	return BIT(FIELD_GET(AS73211_CREG1_TIME_MASK, data->creg1));
+}
+
+static unsigned int as73211_integration_time_us(struct as73211_data *data,
+						 unsigned int integration_time_1024cyc)
+{
+	/*
+	 * f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz)
+	 * t_cycl is configured in CREG1 in powers of 2 (x 1024 cycles)
+	 * t_int_us = 1 / (f_samp) * t_cycl * US_PER_SEC
+	 *          = 1 / (2^CREG3_CCLK * 1,024,000) * 2^CREG1_CYCLES * 1,024 * US_PER_SEC
+	 *          = 2^(-CREG3_CCLK) * 2^CREG1_CYCLES * 1,000
+	 * In order to get rid of negative exponents, we extend the "fraction"
+	 * by 2^3 (CREG3_CCLK,max = 3)
+	 * t_int_us = 2^(3-CREG3_CCLK) * 2^CREG1_CYCLES * 125
+	 */
+	return BIT(3 - FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
Quoted 8 lines

drivers/iio/light/as73211.c line 210

Quoted 8 lines
drivers/iio/light/as73211.c new file +8 -0
+		integration_time_1024cyc * 125;
+}
+
+static void as73211_integration_time_calc_avail(struct as73211_data *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->int_time_avail); i++) {  

This loops goes to double the size of the array.

I'd propose to just do ARRAY_SIZE(data->int_time_avail) / 2 here

Quoted 211 lines
Quoted 211 lines
drivers/iio/light/as73211.c new file +211 -0
+		unsigned int time_us = as73211_integration_time_us(data, BIT(i));
+
+		data->int_time_avail[i * 2 + 0] = time_us / USEC_PER_SEC;
+		data->int_time_avail[i * 2 + 1] = time_us % USEC_PER_SEC;
+	}
+}
+
+static unsigned int as73211_gain(struct as73211_data *data)
+{
+	/* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+	return BIT(AS73211_CREG1_GAIN_1 - FIELD_GET(AS73211_CREG1_GAIN_MASK, data->creg1));
+}
+
+/* must be called with as73211_data::mutex held. */
+static int as73211_req_data(struct as73211_data *data)
+{
+	unsigned int time_us = as73211_integration_time_us(data,
+							    as73211_integration_time_1024cyc(data));
+	struct device *dev = &data->client->dev;
+	union i2c_smbus_data smbus_data;
+	u16 osr_status;
+	int ret;
+
+	if (data->client->irq)
+		reinit_completion(&data->completion);
+
+	/*
+	 * During measurement, there should be no traffic on the i2c bus as the
+	 * electrical noise would disturb the measurement process.
+	 */
+	i2c_lock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+	data->osr &= ~AS73211_OSR_DOS_MASK;
+	data->osr |= AS73211_OSR_DOS_MEASURE | AS73211_OSR_SS;
+
+	smbus_data.byte = data->osr;
+	ret = __i2c_smbus_xfer(data->client->adapter, data->client->addr,
+			data->client->flags, I2C_SMBUS_WRITE,
+			AS73211_REG_OSR, I2C_SMBUS_BYTE_DATA, &smbus_data);
+	if (ret < 0) {
+		i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+		return ret;
+	}
+
+	/*
+	 * Reset AS73211_OSR_SS (is self clearing) in order to avoid unintentional
+	 * triggering of further measurements later.
+	 */
+	data->osr &= ~AS73211_OSR_SS;
+
+	/*
+	 * Add some extra margin for the timeout. sensor timing is not as precise
+	 * as our one ...
+	 */
+	time_us += time_us / 8;
+	if (data->client->irq) {
+		ret = wait_for_completion_timeout(&data->completion, usecs_to_jiffies(time_us));
+		if (!ret) {
+			dev_err(dev, "timeout waiting for READY IRQ\n");
+			i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+			return -ETIMEDOUT;
+		}
+	} else {
+		/* Wait integration time */
+		usleep_range(time_us, 2 * time_us);
+	}
+
+	i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+	ret = i2c_smbus_read_word_data(data->client, AS73211_OUT_OSR_STATUS);
+	if (ret < 0)
+		return ret;
+
+	osr_status = ret;
+	if (osr_status != (AS73211_OSR_DOS_MEASURE | AS73211_OSR_STATUS_NDATA)) {
+		if (osr_status & AS73211_OSR_SS) {
+			dev_err(dev, "%s() Measurement has not stopped\n", __func__);
+			return -ETIME;
+		}
+		if (osr_status & AS73211_OSR_STATUS_NOTREADY) {
+			dev_err(dev, "%s() Data is not ready\n", __func__);
+			return -ENODATA;
+		}
+		if (!(osr_status & AS73211_OSR_STATUS_NDATA)) {
+			dev_err(dev, "%s() No new data available\n", __func__);
+			return -ENODATA;
+		}
+		if (osr_status & AS73211_OSR_STATUS_LDATA) {
+			dev_err(dev, "%s() Result buffer overrun\n", __func__);
+			return -ENOBUFS;
+		}
+		if (osr_status & AS73211_OSR_STATUS_ADCOF) {
+			dev_err(dev, "%s() ADC overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		if (osr_status & AS73211_OSR_STATUS_MRESOF) {
+			dev_err(dev, "%s() Measurement result overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		if (osr_status & AS73211_OSR_STATUS_OUTCONVOF) {
+			dev_err(dev, "%s() Timer overflow\n", __func__);
+			return -EOVERFLOW;
+		}
+		dev_err(dev, "%s() Unexpected status value\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		int ret;
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		ret = as73211_req_data(data);
+		if (ret < 0) {
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		}
+
+		ret = i2c_smbus_read_word_data(data->client, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		*val = ret;
+		return IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = AS73211_OFFSET_TEMP_INT;
+		*val2 = AS73211_OFFSET_TEMP_MICRO;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = AS73211_SCALE_TEMP_INT;
+			*val2 = AS73211_SCALE_TEMP_MICRO;
+			return IIO_VAL_INT_PLUS_MICRO;
+
+		case IIO_INTENSITY: {
+			unsigned int scale;
+
+			switch (chan->channel2) {
+			case IIO_MOD_X:
+				scale = AS73211_SCALE_X;
+				break;
+			case IIO_MOD_Y:
+				scale = AS73211_SCALE_Y;
+				break;
+			case IIO_MOD_Z:
+				scale = AS73211_SCALE_Z;
+				break;
+			default:
+				return -EINVAL;
+			}
+			scale /= as73211_gain(data);
+			scale /= as73211_integration_time_1024cyc(data);
+			*val = scale;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}}
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+		*val = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+			AS73211_SAMPLE_FREQ_BASE;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*val = as73211_gain(data);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_INT_TIME: {
+		unsigned int time_us;
+
+		mutex_lock(&data->mutex);
+		time_us = as73211_integration_time_us(data, as73211_integration_time_1024cyc(data));
+		mutex_unlock(&data->mutex);
+		*val = time_us / USEC_PER_SEC;
+		*val2 = time_us % USEC_PER_SEC;
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}}
+}
+
+static int as73211_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(as73211_samp_freq_avail);
+		*vals = as73211_samp_freq_avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+
Quoted 8 lines

drivers/iio/light/as73211.c line 429

Quoted 8 lines
drivers/iio/light/as73211.c new file +8 -0
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*length = ARRAY_SIZE(as73211_hardwaregain_avail);
+		*vals = as73211_hardwaregain_avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(data->int_time_avail);  

This length is correct as read_avail expects it to be double the number of entries, if using IIO_VAL_INT_PLUS_MICRO.

Quoted 373 lines
Quoted 372 lines
drivers/iio/light/as73211.c new file +372 -0
+		*vals = data->int_time_avail;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int _as73211_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan __always_unused,
+			       int val, int val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		int reg_bits, freq_kHz = val / HZ_PER_KHZ;  /* 1024, 2048, ... */
+
+		/* val must be 1024 * 2^x */
+		if (val < 0 || (freq_kHz * HZ_PER_KHZ) != val ||
+				!is_power_of_2(freq_kHz) || val2)
+			return -EINVAL;
+
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz (=2^10)) */
+		reg_bits = ilog2(freq_kHz) - 10;
+		if (!FIELD_FIT(AS73211_CREG3_CCLK_MASK, reg_bits))
+			return -EINVAL;
+
+		data->creg3 &= ~AS73211_CREG3_CCLK_MASK;
+		data->creg3 |= FIELD_PREP(AS73211_CREG3_CCLK_MASK, reg_bits);
+		as73211_integration_time_calc_avail(data);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG3, data->creg3);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	}
+	case IIO_CHAN_INFO_HARDWAREGAIN: {
+		unsigned int reg_bits;
+
+		if (val < 0 || !is_power_of_2(val) || val2)
+			return -EINVAL;
+
+		/* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+		reg_bits = AS73211_CREG1_GAIN_1 - ilog2(val);
+		if (!FIELD_FIT(AS73211_CREG1_GAIN_MASK, reg_bits))
+			return -EINVAL;
+
+		data->creg1 &= ~AS73211_CREG1_GAIN_MASK;
+		data->creg1 |= FIELD_PREP(AS73211_CREG1_GAIN_MASK, reg_bits);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	}
+	case IIO_CHAN_INFO_INT_TIME: {
+		int val_us = val * USEC_PER_SEC + val2;
+		int time_ms;
+		int reg_bits;
+
+		/* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+		int f_samp_1_024mhz = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3));
+
+		/*
+		 * time_ms = time_us * US_PER_MS * f_samp_1_024mhz / MHZ_PER_HZ
+		 *         = time_us * f_samp_1_024mhz / 1000
+		 */
+		time_ms = (val_us * f_samp_1_024mhz) / 1000;  /* 1 ms, 2 ms, ... (power of two) */
+		if (time_ms < 0 || !is_power_of_2(time_ms) || time_ms > AS73211_SAMPLE_TIME_MAX_MS)
+			return -EINVAL;
+
+		reg_bits = ilog2(time_ms);
+		if (!FIELD_FIT(AS73211_CREG1_TIME_MASK, reg_bits))
+			return -EINVAL;  /* not possible due to previous tests */
+
+		data->creg1 &= ~AS73211_CREG1_TIME_MASK;
+		data->creg1 |= FIELD_PREP(AS73211_CREG1_TIME_MASK, reg_bits);
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+
+	default:
+		return -EINVAL;
+	}}
+}
+
+static int as73211_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret < 0)
+		goto error_unlock;
+
+	/* Need to switch to config mode ... */
+	if ((data->osr & AS73211_OSR_DOS_MASK) != AS73211_OSR_DOS_CONFIG) {
+		data->osr &= ~AS73211_OSR_DOS_MASK;
+		data->osr |= AS73211_OSR_DOS_CONFIG;
+
+		ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+		if (ret < 0)
+			goto error_release;
+	}
+
+	ret = _as73211_write_raw(indio_dev, chan, val, val2, mask);
+
+error_release:
+	iio_device_release_direct_mode(indio_dev);
+error_unlock:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static irqreturn_t as73211_ready_handler(int irq __always_unused, void *priv)
+{
+	struct as73211_data *data = iio_priv(priv);
+
+	complete(&data->completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t as73211_trigger_handler(int irq __always_unused, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct as73211_data *data = iio_priv(indio_dev);
+	struct {
+		__le16 chan[4];
+		s64 ts __aligned(8);
+	} scan;
+	int data_result, ret;
+
+	mutex_lock(&data->mutex);
+
+	data_result = as73211_req_data(data);
+	if (data_result < 0 && data_result != -EOVERFLOW)
+		goto done;  /* don't push any data for errors other than EOVERFLOW */
+
+	if (*indio_dev->active_scan_mask == AS73211_SCAN_MASK_ALL) {
+		/* Optimization for reading all (color + temperature) channels */
+		u8 addr = as73211_channels[0].address;
+		struct i2c_msg msgs[] = {
+			{
+				.addr = data->client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &addr,
+			},
+			{
+				.addr = data->client->addr,
+				.flags = I2C_M_RD,
+				.len = sizeof(scan.chan),
+				.buf = (u8 *)&scan.chan,
+			},
+		};
+
+		ret = i2c_transfer(data->client->adapter, msgs, ARRAY_SIZE(msgs));
+		if (ret < 0)
+			goto done;
+	} else {
+		/* Optimization for reading only color channels */
+
+		/* AS73211 starts reading at address 2 */
+		ret = i2c_master_recv(data->client,
+				(char *)&scan.chan[1], 3 * sizeof(scan.chan[1]));
+		if (ret < 0)
+			goto done;
+	}
+
+	if (data_result) {
+		/*
+		 * Saturate all channels (in case of overflows). Temperature channel
+		 * is not affected by overflows.
+		 */
+		scan.chan[1] = cpu_to_le16(U16_MAX);
+		scan.chan[2] = cpu_to_le16(U16_MAX);
+		scan.chan[3] = cpu_to_le16(U16_MAX);
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+
+done:
+	mutex_unlock(&data->mutex);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info as73211_info = {
+	.read_raw = as73211_read_raw,
+	.read_avail = as73211_read_avail,
+	.write_raw = as73211_write_raw,
+};
+
+static int as73211_power(struct iio_dev *indio_dev, bool state)
+{
+	struct as73211_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (state)
+		data->osr &= ~AS73211_OSR_PD;
+	else
+		data->osr |= AS73211_OSR_PD;
+
+	ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+
+	mutex_unlock(&data->mutex);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void as73211_power_disable(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	as73211_power(indio_dev, false);
+}
+
+static int as73211_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct as73211_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	mutex_init(&data->mutex);
+	init_completion(&data->completion);
+
+	indio_dev->info = &as73211_info;
+	indio_dev->name = AS73211_DRV_NAME;
+	indio_dev->channels = as73211_channels;
+	indio_dev->num_channels = ARRAY_SIZE(as73211_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+	if (ret < 0)
+		return ret;
+	data->osr = ret;
+
+	/* reset device */
+	data->osr |= AS73211_OSR_SW_RES;
+	ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+	if (ret < 0)
+		return ret;
+	data->osr = ret;
+
+	/*
+	 * Reading AGEN is only possible after reset (AGEN is not available if
+	 * device is in measurement mode).
+	 */
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_AGEN);
+	if (ret < 0)
+		return ret;
+
+	/* At the time of writing this driver, only DEVID 2 and MUT 1 are known. */
+	if ((ret & AS73211_AGEN_DEVID_MASK) != AS73211_AGEN_DEVID(2) ||
+	    (ret & AS73211_AGEN_MUT_MASK) != AS73211_AGEN_MUT(1))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG1);
+	if (ret < 0)
+		return ret;
+	data->creg1 = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG2);
+	if (ret < 0)
+		return ret;
+	data->creg2 = ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG3);
+	if (ret < 0)
+		return ret;
+	data->creg3 = ret;
+	as73211_integration_time_calc_avail(data);
+
+	ret = as73211_power(indio_dev, true);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, as73211_power_disable, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, as73211_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL,
+				as73211_ready_handler,
+				IRQF_ONESHOT,
+				client->name, indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int __maybe_unused as73211_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+	return as73211_power(indio_dev, false);
+}
+
+static int __maybe_unused as73211_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+	return as73211_power(indio_dev, true);
+}
+
+static SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume);
+
+static const struct of_device_id as73211_of_match[] = {
+	{ .compatible = "ams,as73211" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, as73211_of_match);
+
+static const struct i2c_device_id as73211_id[] = {
+	{ "as73211", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, as73211_id);
+
+static struct i2c_driver as73211_driver = {
+	.driver = {
+		.name           = AS73211_DRV_NAME,
+		.of_match_table = as73211_of_match,
+		.pm             = &as73211_pm_ops,
+	},
+	.probe_new  = as73211_probe,
+	.id_table   = as73211_id,
+};
+module_i2c_driver(as73211_driver);
+
+MODULE_AUTHOR("Christian Eggers <[email protected]>");
+MODULE_DESCRIPTION("AS73211 XYZ True Color Sensor driver");
+MODULE_LICENSE("GPL");    
author maintainer
#19 lore raw

Re: [PATCH v6 2/2] iio: light: as73211: New driver

Hi Jonathan,

sorry for the delay, I was on holiday last week.

Quoted 5 lines · Jonathan Cameron

I've done this halving change because I'm fairly sure it's right and want to get a clean report from 0-day before I do a pull request at the weekend. Still time to change if anyone shouts quickly. If not there is still plenty of time for a fix.

looks correct for me.

Thanks
Christian