Add support for Tianma nt36672a video mode panel
Subsystems (4)
v3 cover Add support for Tianma nt36672a video mode panel
Some Poco F1 phones from Xiaomi have an nt36672a video mode panel; add support for the same.
Most of the panel data is taken from downstream panel dts, and is converted to drm-panel based driver by me.
It has been validated with v5.8-rc5 on Poco F1 phone; my tree with other dependent patches is here [1]
[1]: https://git.linaro.org/people/sumit.semwal/linux-dev.git/log/?h=dev/poco-panel-upstreaming
---
v2: In dt-binding, removed ports node, making port@0 directly under panel@0 node.
Also updated the panel_on delay to a safer 200ms as needed for latest Android.
v3: Replaced port@0 with just port in panel@0 node.
[1]:
Sumit Semwal (2):
dt-bindings: display: panel: Add bindings for Tianma nt36672a panel
drm: panel: Add tianma nt36672a panel driver
.../display/panel/tianma,nt36672a.yaml | 95 ++ MAINTAINERS | 7 + drivers/gpu/drm/panel/Kconfig | 11 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-tianma-nt36672a.c | 859 ++++++++++++++++++ 5 files changed, 973 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/tianma,nt36672a.yaml create mode 100644 drivers/gpu/drm/panel/panel-tianma-nt36672a.c
Signature · 6 lines
2.27.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH RESEND v3 1/2 dt-bindings: display: panel: Add bindings for Tianma nt36672a panel
The nt36672a panel from Tianma is a FHD+ panel with a resolution of 1080x2246 and 6.18 inches size. It is found in some of the Poco F1 phones.
---
v2: remove ports node, making port@0 directly under panel@0 node.
v3: updated to replace port@0 to just 'port'.
--- .../display/panel/tianma,nt36672a.yaml | 95 +++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/tianma,nt36672a.yaml
Documentation/devicetree/bindings/display/panel/tianma,nt36672a.yaml new file +95 -0
@@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/tianma,nt36672a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tianma model NT36672A DSI Panel display driver + +maintainers: + - Sumit Semwal <[email protected]> + +description: | + The nt36672a panel from Tianma is a FHD+ LCD display panel with a resolution + of 1080x2246. It is a video mode DSI panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: tianma,nt36672a + + reg: + description: DSI virtual channel of the peripheral + + reset-gpios: + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + vddio-supply: + description: phandle of the regulator that provides the supply voltage + Power IC supply + + vddpos-supply: + description: phandle of the positive boost supply regulator + + vddneg-supply: + description: phandle of the negative boost supply regulator + + pinctrl-names: + description: Pinctrl for panel active and suspend + + pinctrl-0: + description: Active pinctrls + + pinctrl-1: + description: Suspend pinctrls + + port: true + +required: + - compatible + - reg + - vddi0-supply + - vddpos-supply + - vddneg-supply + - reset-gpios + - pinctrl-names + - pinctrl-0 + - pinctrl-1 + - port + +unevaluatedProperties: false + +examples: + - |+ + #include <dt-bindings/gpio/gpio.h> + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,nt36672a"; + reg = <0>; + vddi0-supply = <&vreg_l14a_1p88>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "panel_active", "panel_suspend"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + #address-cells = <1>; + #size-cells = <0>; + port { + tianma_nt36672a_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +...
Signature · 1 line
2.27.0
PATCH RESEND v3 2/2 drm: panel: Add tianma nt36672a panel driver
In reply to Sumit SemwalSome Poco F1 phones have an LCD panel from Tianma, model nt36672a, with a resolution of 1080x2246 that operates in DSI video mode.
Add the drm panel driver for it.
During testing, Benni Steini <[email protected]> helped us fix the reset sequence timing (from 10ms to 20ms), to get the bootanimation to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a safe high value to avoid a white screen occasionally.
---
v2: increase reset sequence timing to a safe 200ms
--- MAINTAINERS | 7 + drivers/gpu/drm/panel/Kconfig | 11 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-tianma-nt36672a.c | 859 ++++++++++++++++++ 4 files changed, 878 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-tianma-nt36672a.c
MAINTAINERS +7 -0
@@ -5544,6 +5544,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc F: Documentation/devicetree/bindings/display/ste,mcde.txt F: drivers/gpu/drm/mcde/ +DRM DRIVER FOR TIANMA NT36672A PANELS +M: Sumit Semwal <[email protected]> +S: Maintained +T: git git://anongit.freedesktop.org/drm/drm-misc +F: Documentation/devicetree/bindings/display/panel/tianma,nt36672a-panel.yaml +F: drivers/gpu/drm/panel/panel-tianma-nt36672a.c + DRM DRIVER FOR TDFX VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/tdfx/
drivers/gpu/drm/panel/Kconfig +11 -0
@@ -437,6 +437,17 @@ config DRM_PANEL_TPO_TD043MTEA1 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 4.3" panel (found on the OMAP3 Pandora board). +config DRM_PANEL_TIANMA_FHD_NT36672A + tristate "TIANMA NT36672A panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Tianma NT36672A + panel. It is seen mostly in Xiaomi Poco F1 mobile phone. + The panel has a 1080x2246 resolution and uses 24 bit RGB per pixel. + It provides a MIPI DSI interface to the host. + config DRM_PANEL_TPO_TPG110 tristate "TPO TPG 800x400 panel" depends on OF && SPI && GPIOLIB
drivers/gpu/drm/panel/Makefile +1 -0
@@ -44,6 +44,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o +obj-$(CONFIG_DRM_PANEL_TIANMA_FHD_NT36672A) += panel-tianma-nt36672a.o obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
drivers/gpu/drm/panel/panel-tianma-nt36672a.c new file +859 -0
859 lines not on this page · raw message
Signature · 6 lines
2.27.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel