Skip to contentSkip to conversation

TypeC Connector Class driver improvements

PATCH Superseded Azhar Shaikh 2 participants 6 messages Aug 11, 2020 – Aug 18, 2020

Subsystems (3)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover TypeC Connector Class driver improvements

Changes in v3:
* Patch 1: "platform/chrome: cros_ec_typec: Send enum values to

            usb_role_switch_set_role()"

- No change

* Patch 2: "platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect"
- Move the location of calling usb_role_switch_set_role() to end of function in cros_typec_configure_mux() to avoid any change in code flow.

* Patch 3: "platform/chrome: cros_ec_typec: Re-order connector configuration steps"
- New patch added

Changes in v2:
* Patch 1: "platform/chrome: cros_ec_typec: Send enum values to

            usb_role_switch_set_role()"

- Update the commit message to change 'USB_ROLE_HOST in case of UFP.' to 'USB_ROLE_HOST in case of DFP.'

* Patch 2: "platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect"
- New patch added.

Azhar Shaikh (3):
platform/chrome: cros_ec_typec: Send enum values to
usb_role_switch_set_role()
platform/chrome: cros_ec_typec: Avoid setting usb role twice during
disconnect
platform/chrome: cros_ec_typec: Re-order connector configuration steps

 drivers/platform/chrome/cros_ec_typec.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 1/3 platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()

usb_role_switch_set_role() has the second argument as enum for usb_role. Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent. This eventually translates to USB_ROLE_NONE in case of UFP and USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of DFP.

Fixes 7e7def15fa4b ("platform/chrome: cros_ec_typec: Add USB mux control")

---
Changes in v3:
- No changes

Changes in v2:
- Update the commit message to change 'USB_ROLE_HOST in case of UFP.' to 'USB_ROLE_HOST in case of DFP.'

 drivers/platform/chrome/cros_ec_typec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/platform/chrome/cros_ec_typec.c +2 -1
index 3fcd27ec9ad8..06108212ee94 100644
@@ -591,7 +591,8 @@ static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
 		dev_warn(typec->dev, "Configure muxes failed, err = %d\n", ret);
 
 	return usb_role_switch_set_role(typec->ports[port_num]->role_sw,
-					!!(resp.role & PD_CTRL_RESP_ROLE_DATA));
+				       resp.role & PD_CTRL_RESP_ROLE_DATA
+				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
 }
 
 static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
Signature · 1 line
2.17.1
#2 lore raw

Re: [PATCH v3 1/3] platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()

Hi Azhar,

Thank you for your patch.

Quoted 9 lines · Azhar Shaikh

usb_role_switch_set_role() has the second argument as enum for usb_role. Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent. This eventually translates to USB_ROLE_NONE in case of UFP and USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of DFP.

Fixes 7e7def15fa4b ("platform/chrome: cros_ec_typec: Add USB mux control")

No extra line here.

Quoted 1 line

Did the Prashant reviewed tag disappear for some reason? Can you resend the patches with all the collected tags? (looks like this patch and others from this series already have been reviewed)

Thanks,
Enric

Quoted 26 lines

---
Changes in v3:
- No changes

Changes in v2:
- Update the commit message to change 'USB_ROLE_HOST in case of UFP.' to 'USB_ROLE_HOST in case of DFP.'

 drivers/platform/chrome/cros_ec_typec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/platform/chrome/cros_ec_typec.c +2 -1
index 3fcd27ec9ad8..06108212ee94 100644
@@ -591,7 +591,8 @@ static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
 		dev_warn(typec->dev, "Configure muxes failed, err = %d\n", ret);
 
 	return usb_role_switch_set_role(typec->ports[port_num]->role_sw,
-					!!(resp.role & PD_CTRL_RESP_ROLE_DATA));
+				       resp.role & PD_CTRL_RESP_ROLE_DATA
+				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
 }
 
 static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
#3 lore raw

RE: [PATCH v3 1/3] platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()

Hi Enric,

Quoted 25 lines

-----Original Message-----
From: Enric Balletbo i Serra <[email protected]>
Sent: Tuesday, August 18, 2020 6:38 AM
To: Shaikh, Azhar <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]
Cc: [email protected]; Mani, Rajmohan <[email protected]>; Patel, Utkarsh H <[email protected]>; Bowman, Casey G <[email protected]>
Subject: Re: [PATCH v3 1/3] platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()

Hi Azhar,

Thank you for your patch.

Quoted 1 line · Azhar Shaikh

usb_role_switch_set_role() has the second argument as enum for

usb_role.

Quoted 6 lines

Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent. This eventually translates to USB_ROLE_NONE in case of UFP and USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of DFP.

Quoted 5 lines
Quoted 3 lines
Fixes 7e7def15fa4b ("platform/chrome: cros_ec_typec: Add USB mux

control")

No extra line here.

Ack

Quoted 7 lines
Quoted 2 lines

Did the Prashant reviewed tag disappear for some reason? Can you resend the patches with all the collected tags? (looks like this patch and others from this series already have been reviewed)

Sorry about that, will add the tags back.

Quoted 34 lines

Thanks,
Enric

drivers/platform/chrome/cros_ec_typec.c static int cros_typec_port_update(struct

Quoted 17 lines

---
Changes in v3:
- No changes

Changes in v2:
- Update the commit message to change 'USB_ROLE_HOST in case of UFP.' to 'USB_ROLE_HOST in case of DFP.'

 drivers/platform/chrome/cros_ec_typec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/platform/chrome/cros_ec_typec.c +0 -0
index 3fcd27ec9ad8..06108212ee94 100644
@@ -591,7 +591,8 @@ static int cros_typec_port_update(struct

cros_typec_data *typec, int port_num)

drivers/platform/chrome/cros_ec_typec.c static int cros_typec_port_update(struct · line 591

Quoted 1 line
drivers/platform/chrome/cros_ec_typec.c +0 -0
 		dev_warn(typec->dev, "Configure muxes failed, err = %d\n",

ret);

drivers/platform/chrome/cros_ec_typec.c static int cros_typec_port_update(struct · line 594

Quoted 4 lines
drivers/platform/chrome/cros_ec_typec.c +0 -1
 	return usb_role_switch_set_role(typec->ports[port_num]-
 role_sw,
-					!!(resp.role &

PD_CTRL_RESP_ROLE_DATA));

Quoted 6 lines
drivers/platform/chrome/cros_ec_typec.c +2 -0
+				       resp.role & PD_CTRL_RESP_ROLE_DATA
+				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
 }
 
 static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
#4 lore raw

PATCH v3 2/3 platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect

In reply to Azhar Shaikh

On disconnect port partner is removed and usb role is set to NONE. But then in cros_typec_port_update() the role is set again. Avoid this by moving usb_role_switch_set_role() to cros_typec_configure_mux().

---
Changes in v3:
- Move the location of calling usb_role_switch_set_role() to end of function in cros_typec_configure_mux() to avoid any change in code flow.

Changes in v2:
- New patch added

 drivers/platform/chrome/cros_ec_typec.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/platform/chrome/cros_ec_typec.c +7 -4
index 06108212ee94..2b43e1176e73 100644
@@ -533,7 +533,12 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
 		ret = -ENOTSUPP;
 	}
 
-	return ret;
+	if (ret)
+		return ret;
+
+	return usb_role_switch_set_role(typec->ports[port_num]->role_sw,
+				       pd_ctrl->role & PD_CTRL_RESP_ROLE_DATA
+				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
 }
 
 static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
@@ -590,9 +595,7 @@ static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
 	if (ret)
 		dev_warn(typec->dev, "Configure muxes failed, err = %d\n", ret);
 
-	return usb_role_switch_set_role(typec->ports[port_num]->role_sw,
-				       resp.role & PD_CTRL_RESP_ROLE_DATA
-				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
+	return ret;
 }
 
 static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
Signature · 1 line
2.17.1
#5 lore raw

PATCH v3 3/3 platform/chrome: cros_ec_typec: Re-order connector configuration steps

In reply to Azhar Shaikh

As per USB Type-C Spec R2.0 section 4.5.1.2 (Connecting Sources and Sinks) and section 4.5.2.2 (Connection State Machine Requirements), the typical flow for configuring a device connected to a typeC port is as below:

1. Source/sink detection
2. Orientation
3. Data role
4. VCONN
5. VBUS (USB Type-C currents)
6. The connector is now configured. We can start the PD communication that should lead into configuration of the mux if we enter a mode.

But in existing code data role was set after the connector and mux are already configured. So fix this by following the spec to set the data role before the connector and mux are configured.

---
Changes in v3:
- New patch added

 drivers/platform/chrome/cros_ec_typec.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/platform/chrome/cros_ec_typec.c +7 -6
index 2b43e1176e73..9e4fad9ca59e 100644
@@ -516,6 +516,12 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
 	if (ret)
 		return ret;
 
+	ret = usb_role_switch_set_role(typec->ports[port_num]->role_sw,
+				       pd_ctrl->role & PD_CTRL_RESP_ROLE_DATA
+				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
+	if (ret)
+		return ret;
+
 	if (mux_flags & USB_PD_MUX_TBT_COMPAT_ENABLED) {
 		ret = cros_typec_enable_tbt(typec, port_num, pd_ctrl);
 	} else if (mux_flags & USB_PD_MUX_DP_ENABLED) {
@@ -533,12 +539,7 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
 		ret = -ENOTSUPP;
 	}
 
-	if (ret)
-		return ret;
-
-	return usb_role_switch_set_role(typec->ports[port_num]->role_sw,
-				       pd_ctrl->role & PD_CTRL_RESP_ROLE_DATA
-				       ? USB_ROLE_HOST : USB_ROLE_DEVICE);
+	return ret;
 }
 
 static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
Signature · 1 line
2.17.1