Skip to contentSkip to conversation

arm64: dts: imx8mm-beacon-baseboard: Correct LED default state

PATCH Applied Krzysztof Kozlowski 2 participants 2 messages Aug 24, 2020 – Aug 30, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: imx8mm-beacon-baseboard: Correct LED default state

There is no LED default state "none". leds-gpio driver maps it to "off", so correct them to fix dtbs_check warnings like:

arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:

    leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']
---
 arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +3 -3
index baa5f997d018..bf0859f1e1fa 100644
@@ -10,19 +10,19 @@
 		led0 {
 			label = "gen_led0";
 			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "none";
+			default-state = "off";
 		};
 
 		led1 {
 			label = "gen_led1";
 			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "none";
+			default-state = "off";
 		};
 
 		led2 {
 			label = "gen_led2";
 			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "none";
+			default-state = "off";
 		};
 
 		led3 {
Signature · 1 line
2.17.1
Applied
#1 lore raw
Quoted 7 lines · Krzysztof Kozlowski

There is no LED default state "none". leds-gpio driver maps it to "off", so correct them to fix dtbs_check warnings like:

arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:

    leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']

Applied, thanks.