arm64: dts: imx8mm-beacon-baseboard: Correct LED default state
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mm-beacon-baseboard: Correct LED default state
There is no LED default state "none". leds-gpio driver maps it to "off", so correct them to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:
leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']
Signed-off-by Krzysztof Kozlowski <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +3 -3
@@ -10,19 +10,19 @@ led0 { label = "gen_led0"; gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led1 { label = "gen_led1"; gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led2 { label = "gen_led2"; gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led3 {
Signature · 1 line
2.17.1
Shawn Guo
AppliedQuoted 7 lines · Krzysztof Kozlowski
There is no LED default state "none". leds-gpio driver maps it to "off", so correct them to fix
dtbs_checkwarnings like:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied, thanks.