Skip to contentSkip to conversation

Summit SMB3xx driver & device-tree

PATCH Applied Dmitry Osipenko 4 participants 15 messages Aug 13, 2020 – Sep 17, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v3 cover Summit SMB3xx driver & device-tree

We gathered existing patches, fixed and improved what we could and final result is an working charging driver with device-tree support for Nexus 7.

At this moment charging works with:
- Nexus 7 2012 (grouper and tilapia)
- Nexus 7 2013 (flo and deb)
- ... and there are more devices equipped with these chargers.

Changelog:

v3: - The uint32 type now isn't specified for standard units in the SMB
DT binding because standard units already have a type. Thanks to Rob Herring for the suggestion!

- The battery binding changes are rebased on top of the new battery.yaml

- The new battery temperature DT properties now have shorter names and use <min max> format. Thanks to Rob Herring for the suggestion!

- Added new patch that adds SMB charger node to the new Nexus 7 2012 device-tree which has been merged into v5.9 kernel.

v2: - Addressed v1 review comments from Rob Herring and Sebastian Reichel
by moving out common battery properties from the charger node into the battery-cell node.

- power_supply_register() of the SMB driver converted to resource-managed API variant.

- Improved DT property names of the SMB binding by making them to follow the generic power-supply naming scheme (-microvolts at the end, etc).

David Heidelberg (7):
dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
power: supply: smb347-charger: Use resource-managed API
power: supply: smb347-charger: Implement device-tree support
power: supply: smb347-charger: Support SMB345 and SMB358
power: supply: smb347-charger: Remove virtual smb347-battery
ARM: dts: qcom: apq8064-nexus7: Add SMB345 battery charger
ARM: tegra: nexus7: Add SMB347 battery charger

Dmitry Osipenko (3):
dt-bindings: battery: Add temperature properties
power: supply: Support battery temperature device-tree properties
power: supply: smb347-charger: Replace mutex with IRQ disable/enable

 .../bindings/power/supply/battery.yaml        |  24 +
 .../power/supply/summit,smb347-charger.yaml   | 152 +++++
 .../boot/dts/qcom-apq8064-asus-nexus7-flo.dts |  24 +
 .../tegra30-asus-nexus7-grouper-common.dtsi   |  24 +-
 drivers/power/supply/Kconfig                  |   6 +-
 drivers/power/supply/power_supply_core.c      |  19 +
 drivers/power/supply/smb347-charger.c         | 565 +++++++++---------
 .../dt-bindings/power/summit,smb347-charger.h |  19 +
 include/linux/power_supply.h                  |   6 +
 9 files changed, 568 insertions(+), 271 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
 create mode 100644 include/dt-bindings/power/summit,smb347-charger.h
Signature · 1 line
2.27.0
#1 lore raw

PATCH v3 1/10 dt-bindings: battery: Add temperature properties

Document generic battery temperature properties.

---
 .../bindings/power/supply/battery.yaml        | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
Documentation/devicetree/bindings/power/supply/battery.yaml +24 -0
index 932b736ce5c0..0c7e2e44793b 100644
@@ -82,6 +82,27 @@ properties:
       An array containing the temperature in degree Celsius,
       for each of the battery capacity lookup table.
 
+  operating-range-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
 required:
   - compatible
 
@@ -130,6 +151,9 @@ examples:
         /* table for 10 degree Celsius */
         ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
         resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
       };
 
       charger@11 {
Signature · 1 line
2.27.0
#3 lore raw

PATCH v3 2/10 dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

Summit SMB3xx series is a Programmable Switching Li+ Battery Charger. This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358 chargers.

---
 .../power/supply/summit,smb347-charger.yaml   | 152 ++++++++++++++++++
 .../dt-bindings/power/summit,smb347-charger.h |  19 +++
 2 files changed, 171 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
 create mode 100644 include/dt-bindings/power/summit,smb347-charger.h
Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml new file +152 -0
new file mode 100644
index 000000000000..193a23af2007
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <[email protected]>
+  - Dmitry Osipenko <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000,  500000,  700000, 1000000,
+                 1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000,  500000,  700000, 1000000,
+                 1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000,  500000,  700000,  900000, 1200000,
+                 1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000,  500000,  700000,  900000, 1200000,
+                 1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };
include/dt-bindings/power/summit,smb347-charger.h new file +19 -0
new file mode 100644
index 000000000000..d918bf321a71
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later or MIT) */
+/*
+ * Author: David Heidelberg <[email protected]>
+ */
+
+#ifndef _DT_BINDINGS_SMB347_CHARGER_H
+#define _DT_BINDINGS_SMB347_CHARGER_H
+
+/* Charging compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_NONE	0
+#define SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT	1
+#define SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE	2
+
+/* Charging enable control */
+#define SMB3XX_CHG_ENABLE_SW			0
+#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW	1
+#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH	2
+
+#endif
Signature · 1 line
2.27.0
maintainer Reviewed-by on v3 2/10
#4 lore raw

Re: [PATCH v3 02/10] dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx

Quoted 6 lines · Dmitry Osipenko

From: David Heidelberg <[email protected]>

Summit SMB3xx series is a Programmable Switching Li+ Battery Charger. This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358 chargers.

Quoted 9 lines
---
 .../power/supply/summit,smb347-charger.yaml   | 152 ++++++++++++++++++
 .../dt-bindings/power/summit,smb347-charger.h |  19 +++
 2 files changed, 171 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
 create mode 100644 include/dt-bindings/power/summit,smb347-charger.h
#5 lore raw

PATCH v3 3/10 power: supply: Support battery temperature device-tree properties

In reply to Dmitry Osipenko

The generic battery temperature properties are already supported by the power-supply core. Let's support parsing of the common battery temperature properties from a device-tree.

---
 drivers/power/supply/power_supply_core.c | 19 +++++++++++++++++++
 include/linux/power_supply.h             |  6 ++++++
 2 files changed, 25 insertions(+)
drivers/power/supply/power_supply_core.c +19 -0
index ccbad435ed12..38e3aa642131 100644
@@ -579,6 +579,12 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	info->charge_term_current_ua         = -EINVAL;
 	info->constant_charge_current_max_ua = -EINVAL;
 	info->constant_charge_voltage_max_uv = -EINVAL;
+	info->temp_ambient_alert_min         = INT_MIN;
+	info->temp_ambient_alert_max         = INT_MAX;
+	info->temp_alert_min                 = INT_MIN;
+	info->temp_alert_max                 = INT_MAX;
+	info->temp_min                       = INT_MIN;
+	info->temp_max                       = INT_MAX;
 	info->factory_internal_resistance_uohm  = -EINVAL;
 	info->resist_table = NULL;
 
@@ -639,6 +645,19 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	of_property_read_u32(battery_np, "factory-internal-resistance-micro-ohms",
 			     &info->factory_internal_resistance_uohm);
 
+	of_property_read_u32_index(battery_np, "ambient-celsius",
+				   0, &info->temp_ambient_alert_min);
+	of_property_read_u32_index(battery_np, "ambient-celsius",
+				   1, &info->temp_ambient_alert_max);
+	of_property_read_u32_index(battery_np, "alert-celsius",
+				   0, &info->temp_alert_min);
+	of_property_read_u32_index(battery_np, "alert-celsius",
+				   1, &info->temp_alert_max);
+	of_property_read_u32_index(battery_np, "operating-range-celsius",
+				   0, &info->temp_min);
+	of_property_read_u32_index(battery_np, "operating-range-celsius",
+				   1, &info->temp_max);
+
 	len = of_property_count_u32_elems(battery_np, "ocv-capacity-celsius");
 	if (len < 0 && len != -EINVAL) {
 		err = len;
include/linux/power_supply.h +6 -0
index 97cc4b85bf61..d0684362a392 100644
@@ -365,6 +365,12 @@ struct power_supply_battery_info {
 	int constant_charge_voltage_max_uv; /* microVolts */
 	int factory_internal_resistance_uohm;   /* microOhms */
 	int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX];/* celsius */
+	int temp_ambient_alert_min;             /* celsius */
+	int temp_ambient_alert_max;             /* celsius */
+	int temp_alert_min;                     /* celsius */
+	int temp_alert_max;                     /* celsius */
+	int temp_min;                           /* celsius */
+	int temp_max;                           /* celsius */
 	struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX];
 	int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX];
 	struct power_supply_resistance_temp_table *resist_table;
Signature · 1 line
2.27.0
#6 lore raw

PATCH v3 4/10 power: supply: smb347-charger: Use resource-managed API

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

Simplify code, more convenient to use with Device Tree.

---
 drivers/power/supply/smb347-charger.c | 75 +++++++++++----------------
 1 file changed, 29 insertions(+), 46 deletions(-)
drivers/power/supply/smb347-charger.c +29 -46
index f99026d81f2a..60894105fcbd 100644
@@ -836,21 +836,31 @@ static int smb347_irq_init(struct smb347_charger *smb,
 			   struct i2c_client *client)
 {
 	const struct smb347_charger_platform_data *pdata = smb->pdata;
-	int ret, irq = gpio_to_irq(pdata->irq_gpio);
+	unsigned long irqflags = IRQF_ONESHOT;
+	int ret;
 
-	ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
-	if (ret < 0)
-		goto fail;
+	/* Requesting GPIO for IRQ is only needed in non-DT way */
+	if (!client->irq) {
+		int irq = gpio_to_irq(pdata->irq_gpio);
+
+		ret = devm_gpio_request_one(smb->dev, pdata->irq_gpio,
+					    GPIOF_IN, client->name);
+		if (ret < 0)
+			return ret;
+
+		irqflags |= IRQF_TRIGGER_FALLING;
+		client->irq = irq;
+	}
 
-	ret = request_threaded_irq(irq, NULL, smb347_interrupt,
-				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				   client->name, smb);
+	ret = devm_request_threaded_irq(smb->dev, client->irq, NULL,
+					smb347_interrupt, irqflags,
+					client->name, smb);
 	if (ret < 0)
-		goto fail_gpio;
+		return ret;
 
 	ret = smb347_set_writable(smb, true);
 	if (ret < 0)
-		goto fail_irq;
+		return ret;
 
 	/*
 	 * Configure the STAT output to be suitable for interrupts: disable
@@ -860,20 +870,10 @@ static int smb347_irq_init(struct smb347_charger *smb,
 				 CFG_STAT_ACTIVE_HIGH | CFG_STAT_DISABLED,
 				 CFG_STAT_DISABLED);
 	if (ret < 0)
-		goto fail_readonly;
+		client->irq = 0;
 
 	smb347_set_writable(smb, false);
-	client->irq = irq;
-	return 0;
 
-fail_readonly:
-	smb347_set_writable(smb, false);
-fail_irq:
-	free_irq(irq, smb);
-fail_gpio:
-	gpio_free(pdata->irq_gpio);
-fail:
-	client->irq = 0;
 	return ret;
 }
 
@@ -1251,32 +1251,24 @@ static int smb347_probe(struct i2c_client *client,
 	mains_usb_cfg.num_supplicants = ARRAY_SIZE(battery);
 	mains_usb_cfg.drv_data = smb;
 	if (smb->pdata->use_mains) {
-		smb->mains = power_supply_register(dev, &smb347_mains_desc,
-						   &mains_usb_cfg);
+		smb->mains = devm_power_supply_register(dev, &smb347_mains_desc,
+							&mains_usb_cfg);
 		if (IS_ERR(smb->mains))
 			return PTR_ERR(smb->mains);
 	}
 
 	if (smb->pdata->use_usb) {
-		smb->usb = power_supply_register(dev, &smb347_usb_desc,
-						 &mains_usb_cfg);
-		if (IS_ERR(smb->usb)) {
-			if (smb->pdata->use_mains)
-				power_supply_unregister(smb->mains);
+		smb->usb = devm_power_supply_register(dev, &smb347_usb_desc,
+						      &mains_usb_cfg);
+		if (IS_ERR(smb->usb))
 			return PTR_ERR(smb->usb);
-		}
 	}
 
 	battery_cfg.drv_data = smb;
-	smb->battery = power_supply_register(dev, &smb347_battery_desc,
-					     &battery_cfg);
-	if (IS_ERR(smb->battery)) {
-		if (smb->pdata->use_usb)
-			power_supply_unregister(smb->usb);
-		if (smb->pdata->use_mains)
-			power_supply_unregister(smb->mains);
+	smb->battery = devm_power_supply_register(dev, &smb347_battery_desc,
+						  &battery_cfg);
+	if (IS_ERR(smb->battery))
 		return PTR_ERR(smb->battery);
-	}
 
 	/*
 	 * Interrupt pin is optional. If it is connected, we setup the
@@ -1299,17 +1291,8 @@ static int smb347_remove(struct i2c_client *client)
 {
 	struct smb347_charger *smb = i2c_get_clientdata(client);
 
-	if (client->irq) {
+	if (client->irq)
 		smb347_irq_disable(smb);
-		free_irq(client->irq, smb);
-		gpio_free(smb->pdata->irq_gpio);
-	}
-
-	power_supply_unregister(smb->battery);
-	if (smb->pdata->use_usb)
-		power_supply_unregister(smb->usb);
-	if (smb->pdata->use_mains)
-		power_supply_unregister(smb->mains);
 	return 0;
 }
 
Signature · 1 line
2.27.0
#7 lore raw

PATCH v3 5/10 power: supply: smb347-charger: Implement device-tree support

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

This patch adds device-tree support to the SMB347 charger driver. All legacy platform data now can be parsed from DT. Because of that and since SMB347 is an I2C client driver, the IRQ number can be passed automatically through client's IRQ variable if it's defined in DT. There is no need to map GPIO to IRQ manually in the case of DT.

This patch is based on the original work made by:
Jonghwa Lee <[email protected]>

---
 drivers/power/supply/smb347-charger.c | 151 +++++++++++++++++++++++---
 1 file changed, 137 insertions(+), 14 deletions(-)
drivers/power/supply/smb347-charger.c +137 -14
index 60894105fcbd..da2c337107bf 100644
@@ -1180,6 +1180,119 @@ static bool smb347_readable_reg(struct device *dev, unsigned int reg)
 	return smb347_volatile_reg(dev, reg);
 }
 
+static void smb347_dt_parse_pdata(struct device_node *np,
+				  struct smb347_charger_platform_data *pdata)
+{
+	pdata->soft_temp_limit_compensation =
+					SMB347_SOFT_TEMP_COMPENSATE_DEFAULT;
+	/*
+	 * These properties come from the battery info, still we need to
+	 * pre-initialize the values. See smb347_get_battery_info() below.
+	 */
+	pdata->soft_cold_temp_limit = SMB347_TEMP_USE_DEFAULT;
+	pdata->hard_cold_temp_limit = SMB347_TEMP_USE_DEFAULT;
+	pdata->soft_hot_temp_limit  = SMB347_TEMP_USE_DEFAULT;
+	pdata->hard_hot_temp_limit  = SMB347_TEMP_USE_DEFAULT;
+
+	/* Charging constraints */
+	of_property_read_u32(np, "summit,fast-voltage-threshold-microvolt",
+			     &pdata->pre_to_fast_voltage);
+	of_property_read_u32(np, "summit,mains-current-limit-microamp",
+			     &pdata->mains_current_limit);
+	of_property_read_u32(np, "summit,usb-current-limit-microamp",
+			     &pdata->usb_hc_current_limit);
+
+	/* For thermometer monitoring */
+	of_property_read_u32(np, "summit,chip-temperature-threshold-celsius",
+			     &pdata->chip_temp_threshold);
+	of_property_read_u32(np, "summit,soft-compensation-method",
+			     &pdata->soft_temp_limit_compensation);
+	of_property_read_u32(np, "summit,charge-current-compensation-microamp",
+			     &pdata->charge_current_compensation);
+
+	/* Supported charging mode */
+	pdata->use_mains =
+		of_property_read_bool(np, "summit,enable-mains-charging");
+	pdata->use_usb =
+		of_property_read_bool(np, "summit,enable-usb-charging");
+	pdata->use_usb_otg =
+		of_property_read_bool(np, "summit,enable-otg-charging");
+
+	/* Select charging control */
+	of_property_read_u32(np, "summit,enable-charge-control",
+			     &pdata->enable_control);
+
+	/* Interrupt support is optional */
+	if (!of_find_property(np, "interrupts", NULL))
+		pdata->irq_gpio = -1;
+}
+
+static int smb347_get_battery_info(struct smb347_charger *smb)
+{
+	struct smb347_charger_platform_data *pdata = (void *)smb->pdata;
+	struct power_supply_battery_info info = {};
+	struct power_supply *supply;
+	int err;
+
+	if (smb->mains)
+		supply = smb->mains;
+	else
+		supply = smb->usb;
+
+	err = power_supply_get_battery_info(supply, &info);
+	if (err == -ENXIO || err == -ENODEV)
+		return 0;
+	if (err)
+		return err;
+
+	if (info.constant_charge_current_max_ua != -EINVAL)
+		pdata->max_charge_current = info.constant_charge_current_max_ua;
+
+	if (info.constant_charge_voltage_max_uv != -EINVAL)
+		pdata->max_charge_voltage = info.constant_charge_voltage_max_uv;
+
+	if (info.precharge_current_ua != -EINVAL)
+		pdata->pre_charge_current = info.precharge_current_ua;
+
+	if (info.charge_term_current_ua != -EINVAL)
+		pdata->termination_current = info.charge_term_current_ua;
+
+	if (info.temp_alert_min != INT_MIN)
+		pdata->soft_cold_temp_limit = info.temp_alert_min;
+
+	if (info.temp_alert_max != INT_MAX)
+		pdata->soft_hot_temp_limit = info.temp_alert_max;
+
+	if (info.temp_min != INT_MIN)
+		pdata->hard_cold_temp_limit = info.temp_min;
+
+	if (info.temp_max != INT_MAX)
+		pdata->hard_hot_temp_limit = info.temp_max;
+
+	/* Suspend when battery temperature is outside hard limits */
+	if (pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT ||
+	    pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT)
+		pdata->suspend_on_hard_temp_limit = true;
+
+	return 0;
+}
+
+static struct smb347_charger_platform_data
+			*smb347_get_platdata(struct device *dev)
+{
+	struct smb347_charger_platform_data *pdata;
+
+	if (dev->of_node) {
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (pdata)
+			smb347_dt_parse_pdata(dev->of_node, pdata);
+	} else {
+		pdata = dev_get_platdata(dev);
+	}
+
+	return pdata;
+}
+
 static const struct regmap_config smb347_regmap = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -1216,40 +1329,35 @@ static int smb347_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	static char *battery[] = { "smb347-battery" };
-	const struct smb347_charger_platform_data *pdata;
 	struct power_supply_config mains_usb_cfg = {}, battery_cfg = {};
 	struct device *dev = &client->dev;
 	struct smb347_charger *smb;
 	int ret;
 
-	pdata = dev->platform_data;
-	if (!pdata)
-		return -EINVAL;
-
-	if (!pdata->use_mains && !pdata->use_usb)
-		return -EINVAL;
-
 	smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL);
 	if (!smb)
 		return -ENOMEM;
 
+	smb->pdata = smb347_get_platdata(dev);
+	if (!smb->pdata)
+		return -ENODEV;
+
+	if (!smb->pdata->use_mains && !smb->pdata->use_usb)
+		return -EINVAL;
+
 	i2c_set_clientdata(client, smb);
 
 	mutex_init(&smb->lock);
 	smb->dev = &client->dev;
-	smb->pdata = pdata;
 
 	smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
 	if (IS_ERR(smb->regmap))
 		return PTR_ERR(smb->regmap);
 
-	ret = smb347_hw_init(smb);
-	if (ret < 0)
-		return ret;
-
 	mains_usb_cfg.supplied_to = battery;
 	mains_usb_cfg.num_supplicants = ARRAY_SIZE(battery);
 	mains_usb_cfg.drv_data = smb;
+	mains_usb_cfg.of_node = dev->of_node;
 	if (smb->pdata->use_mains) {
 		smb->mains = devm_power_supply_register(dev, &smb347_mains_desc,
 							&mains_usb_cfg);
@@ -1270,11 +1378,19 @@ static int smb347_probe(struct i2c_client *client,
 	if (IS_ERR(smb->battery))
 		return PTR_ERR(smb->battery);
 
+	ret = smb347_get_battery_info(smb);
+	if (ret)
+		return ret;
+
+	ret = smb347_hw_init(smb);
+	if (ret < 0)
+		return ret;
+
 	/*
 	 * Interrupt pin is optional. If it is connected, we setup the
 	 * interrupt support here.
 	 */
-	if (pdata->irq_gpio >= 0) {
+	if (smb->pdata->irq_gpio >= 0) {
 		ret = smb347_irq_init(smb, client);
 		if (ret < 0) {
 			dev_warn(dev, "failed to initialize IRQ: %d\n", ret);
@@ -1302,9 +1418,16 @@ static const struct i2c_device_id smb347_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, smb347_id);
 
+static const struct of_device_id smb3xx_of_match[] = {
+	{ .compatible = "summit,smb347" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, smb3xx_of_match);
+
 static struct i2c_driver smb347_driver = {
 	.driver = {
 		.name = "smb347",
+		.of_match_table = smb3xx_of_match,
 	},
 	.probe        = smb347_probe,
 	.remove       = smb347_remove,
Signature · 1 line
2.27.0
#8 lore raw

PATCH v3 6/10 power: supply: smb347-charger: Support SMB345 and SMB358

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

SMB345 tested on Nexus 7 2013.

Based on:
- https://patchwork.kernel.org/patch/4922431/
- https://patchwork.ozlabs.org/patch/666877/

---
 drivers/power/supply/Kconfig          |   6 +-
 drivers/power/supply/smb347-charger.c | 109 ++++++++++++++------------
 2 files changed, 62 insertions(+), 53 deletions(-)
drivers/power/supply/Kconfig +3 -3
index e87b2434d835..7b1eda3257dd 100644
@@ -639,12 +639,12 @@ config CHARGER_BQ25890
 	  Say Y to enable support for the TI BQ25890 battery charger.
 
 config CHARGER_SMB347
-	tristate "Summit Microelectronics SMB347 Battery Charger"
+	tristate "Summit Microelectronics SMB3XX Battery Charger"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	  Say Y to include support for Summit Microelectronics SMB347
-	  Battery Charger.
+	  Say Y to include support for Summit Microelectronics SMB345,
+	  SMB347 or SMB358 Battery Charger.
 
 config CHARGER_TPS65090
 	tristate "TPS65090 battery charger driver"
drivers/power/supply/smb347-charger.c +59 -50

218 lines not on this page · raw message

Signature · 1 line
2.27.0
#9 lore raw

PATCH v3 7/10 power: supply: smb347-charger: Remove virtual smb347-battery

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

SMB347 is a charger and not a battery driver. Secondly, power-supply core now supports monitored-battery. So the 'fake' battery doesn't do anything useful for us, and thus, it should be removed.

Transfer smb347-battery functionality into smb347-mains and smb347-usb.

---
 drivers/power/supply/smb347-charger.c | 206 ++++++++------------------
 1 file changed, 60 insertions(+), 146 deletions(-)
drivers/power/supply/smb347-charger.c +60 -146
index 90a87e0624a6..335b6ee494e4 100644
@@ -127,7 +127,6 @@
  * @regmap: pointer to driver regmap
  * @mains: power_supply instance for AC/DC power
  * @usb: power_supply instance for USB power
- * @battery: power_supply instance for battery
  * @id: SMB charger ID
  * @mains_online: is AC/DC input connected
  * @usb_online: is USB input connected
@@ -140,7 +139,6 @@ struct smb347_charger {
 	struct regmap		*regmap;
 	struct power_supply	*mains;
 	struct power_supply	*usb;
-	struct power_supply	*battery;
 	unsigned int		id;
 	bool			mains_online;
 	bool			usb_online;
@@ -743,7 +741,10 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	 */
 	if (stat_c & STAT_C_CHARGER_ERROR) {
 		dev_err(smb->dev, "charging stopped due to charger error\n");
-		power_supply_changed(smb->battery);
+		if (smb->pdata->use_mains)
+			power_supply_changed(smb->mains);
+		if (smb->pdata->use_usb)
+			power_supply_changed(smb->usb);
 		handled = true;
 	}
 
@@ -753,8 +754,12 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	 * disabled by the hardware.
 	 */
 	if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
-		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT)
-			power_supply_changed(smb->battery);
+		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) {
+			if (smb->pdata->use_mains)
+				power_supply_changed(smb->mains);
+			if (smb->pdata->use_usb)
+				power_supply_changed(smb->usb);
+		}
 		dev_dbg(smb->dev, "going to HW maintenance mode\n");
 		handled = true;
 	}
@@ -768,7 +773,10 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 
 		if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
 			dev_warn(smb->dev, "charging stopped due to timeout\n");
-		power_supply_changed(smb->battery);
+		if (smb->pdata->use_mains)
+			power_supply_changed(smb->mains);
+		if (smb->pdata->use_usb)
+			power_supply_changed(smb->usb);
 		handled = true;
 	}
 
@@ -936,95 +944,19 @@ static int get_const_charge_voltage(struct smb347_charger *smb)
 	return intval;
 }
 
-static int smb347_mains_get_property(struct power_supply *psy,
-				     enum power_supply_property prop,
-				     union power_supply_propval *val)
-{
-	struct smb347_charger *smb = power_supply_get_drvdata(psy);
-	int ret;
-
-	switch (prop) {
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = smb->mains_online;
-		break;
-
-	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
-		ret = get_const_charge_voltage(smb);
-		if (ret < 0)
-			return ret;
-		else
-			val->intval = ret;
-		break;
-
-	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
-		ret = get_const_charge_current(smb);
-		if (ret < 0)
-			return ret;
-		else
-			val->intval = ret;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static enum power_supply_property smb347_mains_properties[] = {
-	POWER_SUPPLY_PROP_ONLINE,
-	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
-	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
-};
-
-static int smb347_usb_get_property(struct power_supply *psy,
-				   enum power_supply_property prop,
-				   union power_supply_propval *val)
-{
-	struct smb347_charger *smb = power_supply_get_drvdata(psy);
-	int ret;
-
-	switch (prop) {
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = smb->usb_online;
-		break;
-
-	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
-		ret = get_const_charge_voltage(smb);
-		if (ret < 0)
-			return ret;
-		else
-			val->intval = ret;
-		break;
-
-	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
-		ret = get_const_charge_current(smb);
-		if (ret < 0)
-			return ret;
-		else
-			val->intval = ret;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static enum power_supply_property smb347_usb_properties[] = {
-	POWER_SUPPLY_PROP_ONLINE,
-	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
-	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
-};
-
-static int smb347_get_charging_status(struct smb347_charger *smb)
+static int smb347_get_charging_status(struct smb347_charger *smb,
+				      struct power_supply *psy)
 {
 	int ret, status;
 	unsigned int val;
 
-	if (!smb347_is_ps_online(smb))
-		return POWER_SUPPLY_STATUS_DISCHARGING;
+	if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+		if (!smb->usb_online)
+			return POWER_SUPPLY_STATUS_DISCHARGING;
+	} else {
+		if (!smb->mains_online)
+			return POWER_SUPPLY_STATUS_DISCHARGING;
+	}
 
 	ret = regmap_read(smb->regmap, STAT_C, &val);
 	if (ret < 0)
@@ -1063,29 +995,29 @@ static int smb347_get_charging_status(struct smb347_charger *smb)
 	return status;
 }
 
-static int smb347_battery_get_property(struct power_supply *psy,
-				       enum power_supply_property prop,
-				       union power_supply_propval *val)
+static int smb347_get_property(struct power_supply *psy,
+			       enum power_supply_property prop,
+			       union power_supply_propval *val)
 {
 	struct smb347_charger *smb = power_supply_get_drvdata(psy);
-	const struct smb347_charger_platform_data *pdata = smb->pdata;
 	int ret;
 
-	ret = smb347_update_ps_status(smb);
-	if (ret < 0)
-		return ret;
-
 	switch (prop) {
 	case POWER_SUPPLY_PROP_STATUS:
-		ret = smb347_get_charging_status(smb);
+		ret = smb347_get_charging_status(smb, psy);
 		if (ret < 0)
 			return ret;
 		val->intval = ret;
 		break;
 
 	case POWER_SUPPLY_PROP_CHARGE_TYPE:
-		if (!smb347_is_ps_online(smb))
-			return -ENODATA;
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+			if (!smb->usb_online)
+				return -ENODATA;
+		} else {
+			if (!smb->mains_online)
+				return -ENODATA;
+		}
 
 		/*
 		 * We handle trickle and pre-charging the same, and taper
@@ -1104,24 +1036,25 @@ static int smb347_battery_get_property(struct power_supply *psy,
 		}
 		break;
 
-	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		val->intval = pdata->battery_info.technology;
-		break;
-
-	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-		val->intval = pdata->battery_info.voltage_min_design;
-		break;
-
-	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-		val->intval = pdata->battery_info.voltage_max_design;
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+			val->intval = smb->usb_online;
+		else
+			val->intval = smb->mains_online;
 		break;
 
-	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
-		val->intval = pdata->battery_info.charge_full_design;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = get_const_charge_voltage(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
 		break;
 
-	case POWER_SUPPLY_PROP_MODEL_NAME:
-		val->strval = pdata->battery_info.name;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = get_const_charge_current(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
 		break;
 
 	default:
@@ -1131,14 +1064,12 @@ static int smb347_battery_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static enum power_supply_property smb347_battery_properties[] = {
+static enum power_supply_property smb347_properties[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_CHARGE_TYPE,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 };
 
 static bool smb347_volatile_reg(struct device *dev, unsigned int reg)
@@ -1308,32 +1239,23 @@ static const struct regmap_config smb347_regmap = {
 static const struct power_supply_desc smb347_mains_desc = {
 	.name		= "smb347-mains",
 	.type		= POWER_SUPPLY_TYPE_MAINS,
-	.get_property	= smb347_mains_get_property,
-	.properties	= smb347_mains_properties,
-	.num_properties	= ARRAY_SIZE(smb347_mains_properties),
+	.get_property	= smb347_get_property,
+	.properties	= smb347_properties,
+	.num_properties	= ARRAY_SIZE(smb347_properties),
 };
 
 static const struct power_supply_desc smb347_usb_desc = {
 	.name		= "smb347-usb",
 	.type		= POWER_SUPPLY_TYPE_USB,
-	.get_property	= smb347_usb_get_property,
-	.properties	= smb347_usb_properties,
-	.num_properties	= ARRAY_SIZE(smb347_usb_properties),
-};
-
-static const struct power_supply_desc smb347_battery_desc = {
-	.name		= "smb347-battery",
-	.type		= POWER_SUPPLY_TYPE_BATTERY,
-	.get_property	= smb347_battery_get_property,
-	.properties	= smb347_battery_properties,
-	.num_properties	= ARRAY_SIZE(smb347_battery_properties),
+	.get_property	= smb347_get_property,
+	.properties	= smb347_properties,
+	.num_properties	= ARRAY_SIZE(smb347_properties),
 };
 
 static int smb347_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
-	static char *battery[] = { "smb347-battery" };
-	struct power_supply_config mains_usb_cfg = {}, battery_cfg = {};
+	struct power_supply_config mains_usb_cfg = {};
 	struct device *dev = &client->dev;
 	struct smb347_charger *smb;
 	int ret;
@@ -1359,8 +1281,6 @@ static int smb347_probe(struct i2c_client *client,
 	if (IS_ERR(smb->regmap))
 		return PTR_ERR(smb->regmap);
 
-	mains_usb_cfg.supplied_to = battery;
-	mains_usb_cfg.num_supplicants = ARRAY_SIZE(battery);
 	mains_usb_cfg.drv_data = smb;
 	mains_usb_cfg.of_node = dev->of_node;
 	if (smb->pdata->use_mains) {
@@ -1377,12 +1297,6 @@ static int smb347_probe(struct i2c_client *client,
 			return PTR_ERR(smb->usb);
 	}
 
-	battery_cfg.drv_data = smb;
-	smb->battery = devm_power_supply_register(dev, &smb347_battery_desc,
-						  &battery_cfg);
-	if (IS_ERR(smb->battery))
-		return PTR_ERR(smb->battery);
-
 	ret = smb347_get_battery_info(smb);
 	if (ret)
 		return ret;
Signature · 1 line
2.27.0
#10 lore raw

PATCH v3 8/10 power: supply: smb347-charger: Replace mutex with IRQ disable/enable

In reply to Dmitry Osipenko

Let's simply disable/enable IRQ rather than use a mutex that protects from racing with the interrupt handler. The result of this patch is that it's a bit easier now to follow the driver's code.

---
 drivers/power/supply/smb347-charger.c | 38 ++++++++++++++-------------
 1 file changed, 20 insertions(+), 18 deletions(-)
drivers/power/supply/smb347-charger.c +20 -18
index 335b6ee494e4..ec68ab2bce27 100644
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/mutex.h>
 #include <linux/power_supply.h>
 #include <linux/power/smb347-charger.h>
 #include <linux/regmap.h>
@@ -122,7 +121,6 @@
 
 /**
  * struct smb347_charger - smb347 charger instance
- * @lock: protects concurrent access to online variables
  * @dev: pointer to device
  * @regmap: pointer to driver regmap
  * @mains: power_supply instance for AC/DC power
@@ -134,7 +132,6 @@
  * @pdata: pointer to platform data
  */
 struct smb347_charger {
-	struct mutex		lock;
 	struct device		*dev;
 	struct regmap		*regmap;
 	struct power_supply	*mains;
@@ -243,11 +240,9 @@ static int smb347_update_ps_status(struct smb347_charger *smb)
 	if (smb->pdata->use_usb)
 		usb = !(val & IRQSTAT_E_USBIN_UV_STAT);
 
-	mutex_lock(&smb->lock);
 	ret = smb->mains_online != dc || smb->usb_online != usb;
 	smb->mains_online = dc;
 	smb->usb_online = usb;
-	mutex_unlock(&smb->lock);
 
 	return ret;
 }
@@ -263,13 +258,7 @@ static int smb347_update_ps_status(struct smb347_charger *smb)
  */
 static bool smb347_is_ps_online(struct smb347_charger *smb)
 {
-	bool ret;
-
-	mutex_lock(&smb->lock);
-	ret = smb->usb_online || smb->mains_online;
-	mutex_unlock(&smb->lock);
-
-	return ret;
+	return smb->usb_online || smb->mains_online;
 }
 
 /**
@@ -303,14 +292,13 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable)
 		return 0;
 	}
 
-	mutex_lock(&smb->lock);
 	if (smb->charging_enabled != enable) {
 		ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
 					 enable ? CMD_A_CHG_ENABLED : 0);
 		if (!ret)
 			smb->charging_enabled = enable;
 	}
-	mutex_unlock(&smb->lock);
+
 	return ret;
 }
 
@@ -995,9 +983,9 @@ static int smb347_get_charging_status(struct smb347_charger *smb,
 	return status;
 }
 
-static int smb347_get_property(struct power_supply *psy,
-			       enum power_supply_property prop,
-			       union power_supply_propval *val)
+static int smb347_get_property_locked(struct power_supply *psy,
+				      enum power_supply_property prop,
+				      union power_supply_propval *val)
 {
 	struct smb347_charger *smb = power_supply_get_drvdata(psy);
 	int ret;
@@ -1064,6 +1052,21 @@ static int smb347_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int smb347_get_property(struct power_supply *psy,
+			       enum power_supply_property prop,
+			       union power_supply_propval *val)
+{
+	struct smb347_charger *smb = power_supply_get_drvdata(psy);
+	struct i2c_client *client = to_i2c_client(smb->dev);
+	int ret;
+
+	disable_irq(client->irq);
+	ret = smb347_get_property_locked(psy, prop, val);
+	enable_irq(client->irq);
+
+	return ret;
+}
+
 static enum power_supply_property smb347_properties[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_CHARGE_TYPE,
@@ -1273,7 +1276,6 @@ static int smb347_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, smb);
 
-	mutex_init(&smb->lock);
 	smb->dev = &client->dev;
 	smb->id = id->driver_data;
 
Signature · 1 line
2.27.0
#11 lore raw

PATCH v3 9/10 ARM: dts: qcom: apq8064-nexus7: Add SMB345 battery charger

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

Add SMB345 charger node to Nexus 7 2013 DTS.
Proper charger configuration prevents battery from overcharging.

Original author: Vinay Simha BN <[email protected]>

---
 .../boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +24 -0
index a701d4bac320..0c126df20417 100644
@@ -3,6 +3,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -56,6 +57,12 @@ volume_down {
 		};
 	};
 
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1800000>;
+		operating-range-celsius = <0 45>;
+	};
+
 	soc {
 		rpm@108000 {
 			regulators {
@@ -296,8 +303,25 @@ eeprom@52 {
 				bq27541@55 {
 					compatible = "ti,bq27541";
 					reg = <0x55>;
+					power-supplies = <&power_supply>;
+					monitored-battery = <&battery_cell>;
 				};
 
+				power_supply: charger@6a {
+					compatible = "summit,smb345";
+					reg = <0x6a>;
+
+					interrupt-parent = <&tlmm_pinmux>;
+					interrupts = <23 IRQ_TYPE_EDGE_BOTH>;
+
+					summit,chip-temperature-threshold-celsius = <110>;
+					summit,usb-current-limit-microamp = <500000>;
+					summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+					summit,enable-usb-charging;
+					summit,enable-otg-charging;
+
+					monitored-battery = <&battery_cell>;
+				};
 			};
 		};
 
Signature · 1 line
2.27.0
#12 lore raw

PATCH v3 10/10 ARM: tegra: nexus7: Add SMB347 battery charger

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

SMB347 is a battery charger controller which is found on the Nexus 7 device.

---
 .../tegra30-asus-nexus7-grouper-common.dtsi   | 24 ++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +23 -1
index e2d5fbacf9b4..903457292c04 100644
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "tegra30.dtsi"
@@ -919,9 +920,24 @@ nct72: temperature-sensor@4c {
 			#thermal-sensor-cells = <1>;
 		};
 
-		battery@55 {
+		fuel-gauge@55 {
 			compatible = "ti,bq27541";
 			reg = <0x55>;
+			power-supplies = <&power_supply>;
+			monitored-battery = <&battery_cell>;
+		};
+
+		power_supply: charger@6a {
+			compatible = "summit,smb347";
+			reg = <0x6a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,enable-usb-charging;
+
+			monitored-battery = <&battery_cell>;
 		};
 	};
 
@@ -1011,6 +1027,12 @@ backlight: backlight {
 		default-brightness-level = <15>;
 	};
 
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1800000>;
+		operating-range-celsius = <0 45>;
+	};
+
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
 	clk32k_in: clock@0 {
 		compatible = "fixed-clock";
Signature · 1 line
2.27.0
#13 lore raw

Re: [PATCH v3 10/10] ARM: tegra: nexus7: Add SMB347 battery charger

Quoted 10 lines · Dmitry Osipenko

From: David Heidelberg <[email protected]>

SMB347 is a battery charger controller which is found on the Nexus 7 device.

---
 .../tegra30-asus-nexus7-grouper-common.dtsi   | 24 ++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

Applied to for-5.10/arm/dt, thanks.

Thierry

#14 lore raw
In reply to Dmitry Osipenko

Hi,

I queued patches 1-8 (so everything besides the DTS changes). I would like to see some more cleanups and will send a separate patchset for them in a jiffy. Please test them, since I do not have the hardware.

-- Sebastian

Quoted 63 lines · Dmitry Osipenko

We gathered existing patches, fixed and improved what we could and final result is an working charging driver with device-tree support for Nexus 7.

At this moment charging works with:
- Nexus 7 2012 (grouper and tilapia)
- Nexus 7 2013 (flo and deb)
- ... and there are more devices equipped with these chargers.

Changelog:

v3: - The uint32 type now isn't specified for standard units in the SMB
DT binding because standard units already have a type. Thanks to Rob Herring for the suggestion!

- The battery binding changes are rebased on top of the new battery.yaml

- The new battery temperature DT properties now have shorter names and use <min max> format. Thanks to Rob Herring for the suggestion!

- Added new patch that adds SMB charger node to the new Nexus 7 2012 device-tree which has been merged into v5.9 kernel.

v2: - Addressed v1 review comments from Rob Herring and Sebastian Reichel
by moving out common battery properties from the charger node into the battery-cell node.

- power_supply_register() of the SMB driver converted to resource-managed API variant.

- Improved DT property names of the SMB binding by making them to follow the generic power-supply naming scheme (-microvolts at the end, etc).

David Heidelberg (7):
dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
power: supply: smb347-charger: Use resource-managed API
power: supply: smb347-charger: Implement device-tree support
power: supply: smb347-charger: Support SMB345 and SMB358
power: supply: smb347-charger: Remove virtual smb347-battery
ARM: dts: qcom: apq8064-nexus7: Add SMB345 battery charger
ARM: tegra: nexus7: Add SMB347 battery charger

Dmitry Osipenko (3):
dt-bindings: battery: Add temperature properties
power: supply: Support battery temperature device-tree properties
power: supply: smb347-charger: Replace mutex with IRQ disable/enable

 .../bindings/power/supply/battery.yaml        |  24 +
 .../power/supply/summit,smb347-charger.yaml   | 152 +++++
 .../boot/dts/qcom-apq8064-asus-nexus7-flo.dts |  24 +
 .../tegra30-asus-nexus7-grouper-common.dtsi   |  24 +-
 drivers/power/supply/Kconfig                  |   6 +-
 drivers/power/supply/power_supply_core.c      |  19 +
 drivers/power/supply/smb347-charger.c         | 565 +++++++++---------
 .../dt-bindings/power/summit,smb347-charger.h |  19 +
 include/linux/power_supply.h                  |   6 +
 9 files changed, 568 insertions(+), 271 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
 create mode 100644 include/dt-bindings/power/summit,smb347-charger.h
Signature · 1 line
2.27.0